[PATCH 4.19 00/21] 4.19.225-rc1 review

[PATCH 4.19 00/21] 4.19.225-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.225 release.
There are 21 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 12 Jan 2022 07:18:05 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.225-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.225-rc1

wolfgang huang <huangjinhui@kylinos.cn>
    mISDN: change function names to avoid conflicts

yangxingwu <xingwu.yang@gmail.com>
    net: udp: fix alignment problem in udp4_seq_show()

William Zhao <wizhao@redhat.com>
    ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivate

Lixiaokeng <lixiaokeng@huawei.com>
    scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()

Chunfeng Yun <chunfeng.yun@mediatek.com>
    usb: mtu3: fix interval value for intr and isoc

David Ahern <dsahern@kernel.org>
    ipv6: Do cleanup if attribute validation fails in multipath route

David Ahern <dsahern@kernel.org>
    ipv6: Continue processing multipath route even if gateway attribute is invalid

Hangyu Hua <hbh25y@gmail.com>
    phonet: refcount leak in pep_sock_accep

Thomas Toye <thomas@toye.io>
    rndis_host: support Hytera digital radios

Nathan Chancellor <nathan@kernel.org>
    power: reset: ltc2952: Fix use of floating point literals

Darrick J. Wong <djwong@kernel.org>
    xfs: map unwritten blocks in XFS_IOC_{ALLOC,FREE}SP just like fallocate

Eric Dumazet <edumazet@google.com>
    sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc

David Ahern <dsahern@kernel.org>
    ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route

David Ahern <dsahern@kernel.org>
    ipv6: Check attribute length for RTA_GATEWAY in multipath route

Jedrzej Jagielski <jedrzej.jagielski@intel.com>
    i40e: Fix incorrect netdev's real number of RX/TX queues

Di Zhu <zhudi2@huawei.com>
    i40e: fix use-after-free in i40e_sync_filters_subtask()

Tom Rix <trix@redhat.com>
    mac80211: initialize variable have_higher_than_11mbit

Leon Romanovsky <leonro@nvidia.com>
    RDMA/core: Don't infoleak GRH fields

Pavel Skripkin <paskripkin@gmail.com>
    ieee802154: atusb: fix uninit value in atusb_set_extended_addr

Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
    tracing: Tag trace_percpu_buffer as a percpu pointer

Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
    tracing: Fix check for trace_percpu_buffer validity in get_trace_buf()


-------------

Diffstat:

 Makefile                                    |  4 +--
 drivers/infiniband/core/uverbs_marshall.c   |  2 +-
 drivers/isdn/mISDN/core.c                   |  6 ++--
 drivers/isdn/mISDN/core.h                   |  4 +--
 drivers/isdn/mISDN/layer1.c                 |  4 +--
 drivers/net/ethernet/intel/i40e/i40e_main.c | 56 +++++++++++++++++++++++++----
 drivers/net/ieee802154/atusb.c              | 10 +++---
 drivers/net/usb/rndis_host.c                |  5 +++
 drivers/power/reset/ltc2952-poweroff.c      |  4 +--
 drivers/scsi/libiscsi.c                     |  6 ++--
 drivers/usb/mtu3/mtu3_gadget.c              |  4 +--
 fs/xfs/xfs_ioctl.c                          |  3 +-
 kernel/trace/trace.c                        |  6 ++--
 net/ipv4/udp.c                              |  2 +-
 net/ipv6/ip6_vti.c                          |  2 ++
 net/ipv6/route.c                            | 28 +++++++++++++--
 net/mac80211/mlme.c                         |  2 +-
 net/phonet/pep.c                            |  1 +
 net/sched/sch_qfq.c                         |  6 ++--
 19 files changed, 116 insertions(+), 39 deletions(-)

[PATCH 4.19 01/21] tracing: Fix check for trace_percpu_buffer validity in get_trace_buf()

[Greg Kroah-Hartman]

From: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>

commit 823e670f7ed616d0ce993075c8afe0217885f79d upstream.

With the new osnoise tracer, we are seeing the below splat:
    Kernel attempted to read user page (c7d880000) - exploit attempt? (uid: 0)
    BUG: Unable to handle kernel data access on read at 0xc7d880000
    Faulting instruction address: 0xc0000000002ffa10
    Oops: Kernel access of bad area, sig: 11 [#1]
    LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
    ...
    NIP [c0000000002ffa10] __trace_array_vprintk.part.0+0x70/0x2f0
    LR [c0000000002ff9fc] __trace_array_vprintk.part.0+0x5c/0x2f0
    Call Trace:
    [c0000008bdd73b80] [c0000000001c49cc] put_prev_task_fair+0x3c/0x60 (unreliable)
    [c0000008bdd73be0] [c000000000301430] trace_array_printk_buf+0x70/0x90
    [c0000008bdd73c00] [c0000000003178b0] trace_sched_switch_callback+0x250/0x290
    [c0000008bdd73c90] [c000000000e70d60] __schedule+0x410/0x710
    [c0000008bdd73d40] [c000000000e710c0] schedule+0x60/0x130
    [c0000008bdd73d70] [c000000000030614] interrupt_exit_user_prepare_main+0x264/0x270
    [c0000008bdd73de0] [c000000000030a70] syscall_exit_prepare+0x150/0x180
    [c0000008bdd73e10] [c00000000000c174] system_call_vectored_common+0xf4/0x278

osnoise tracer on ppc64le is triggering osnoise_taint() for negative
duration in get_int_safe_duration() called from
trace_sched_switch_callback()->thread_exit().

The problem though is that the check for a valid trace_percpu_buffer is
incorrect in get_trace_buf(). The check is being done after calculating
the pointer for the current cpu, rather than on the main percpu pointer.
Fix the check to be against trace_percpu_buffer.

Link: https://lkml.kernel.org/r/a920e4272e0b0635cf20c444707cbce1b2c8973d.1640255304.git.naveen.n.rao@linux.vnet.ibm.com

Cc: stable@vger.kernel.org
Fixes: e2ace001176dc9 ("tracing: Choose static tp_printk buffer by explicit nesting count")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2822,7 +2822,7 @@ static char *get_trace_buf(void)
 {
 	struct trace_buffer_struct *buffer = this_cpu_ptr(trace_percpu_buffer);
 
-	if (!buffer || buffer->nesting >= 4)
+	if (!trace_percpu_buffer || buffer->nesting >= 4)
 		return NULL;
 
 	buffer->nesting++;

[PATCH 4.19 02/21] tracing: Tag trace_percpu_buffer as a percpu pointer

[Greg Kroah-Hartman]

From: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>

commit f28439db470cca8b6b082239314e9fd10bd39034 upstream.

Tag trace_percpu_buffer as a percpu pointer to resolve warnings
reported by sparse:
  /linux/kernel/trace/trace.c:3218:46: warning: incorrect type in initializer (different address spaces)
  /linux/kernel/trace/trace.c:3218:46:    expected void const [noderef] __percpu *__vpp_verify
  /linux/kernel/trace/trace.c:3218:46:    got struct trace_buffer_struct *
  /linux/kernel/trace/trace.c:3234:9: warning: incorrect type in initializer (different address spaces)
  /linux/kernel/trace/trace.c:3234:9:    expected void const [noderef] __percpu *__vpp_verify
  /linux/kernel/trace/trace.c:3234:9:    got int *

Link: https://lkml.kernel.org/r/ebabd3f23101d89cb75671b68b6f819f5edc830b.1640255304.git.naveen.n.rao@linux.vnet.ibm.com

Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 07d777fe8c398 ("tracing: Add percpu buffers for trace_printk()")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2812,7 +2812,7 @@ struct trace_buffer_struct {
 	char buffer[4][TRACE_BUF_SIZE];
 };
 
-static struct trace_buffer_struct *trace_percpu_buffer;
+static struct trace_buffer_struct __percpu *trace_percpu_buffer;
 
 /*
  * Thise allows for lockless recording.  If we're nested too deeply, then
@@ -2841,7 +2841,7 @@ static void put_trace_buf(void)
 
 static int alloc_percpu_trace_buffer(void)
 {
-	struct trace_buffer_struct *buffers;
+	struct trace_buffer_struct __percpu *buffers;
 
 	buffers = alloc_percpu(struct trace_buffer_struct);
 	if (WARN(!buffers, "Could not allocate percpu trace_printk buffer"))

[PATCH 4.19 03/21] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit 754e4382354f7908923a1949d8dc8d05f82f09cb upstream.

Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().

Fix it by validating if the number of bytes transferred is actually
correct, since usb_control_msg() may read less bytes, than was requested
by caller.

Fail log:

BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
 ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
 atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
 atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396

Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
Reported-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ieee802154/atusb.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -96,7 +96,9 @@ static int atusb_control_msg(struct atus
 
 	ret = usb_control_msg(usb_dev, pipe, request, requesttype,
 			      value, index, data, size, timeout);
-	if (ret < 0) {
+	if (ret < size) {
+		ret = ret < 0 ? ret : -ENODATA;
+
 		atusb->err = ret;
 		dev_err(&usb_dev->dev,
 			"%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
@@ -864,9 +866,9 @@ static int atusb_get_and_show_build(stru
 	if (!build)
 		return -ENOMEM;
 
-	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
-				ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
-				build, ATUSB_BUILD_SIZE, 1000);
+	/* We cannot call atusb_control_msg() here, since this request may read various length data */
+	ret = usb_control_msg(atusb->usb_dev, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD,
+			      ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000);
 	if (ret >= 0) {
 		build[ret] = 0;
 		dev_info(&usb_dev->dev, "Firmware: build %s\n", build);

[PATCH 4.19 04/21] RDMA/core: Dont infoleak GRH fields

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

commit b35a0f4dd544eaa6162b6d2f13a2557a121ae5fd upstream.

If dst->is_global field is not set, the GRH fields are not cleared
and the following infoleak is reported.

=====================================================
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33
 instrument_copy_to_user include/linux/instrumented.h:121 [inline]
 _copy_to_user+0x1c9/0x270 lib/usercopy.c:33
 copy_to_user include/linux/uaccess.h:209 [inline]
 ucma_init_qp_attr+0x8c7/0xb10 drivers/infiniband/core/ucma.c:1242
 ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732
 vfs_write+0x8ce/0x2030 fs/read_write.c:588
 ksys_write+0x28b/0x510 fs/read_write.c:643
 __do_sys_write fs/read_write.c:655 [inline]
 __se_sys_write fs/read_write.c:652 [inline]
 __ia32_sys_write+0xdb/0x120 fs/read_write.c:652
 do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline]
 __do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180
 do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205
 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Local variable resp created at:
 ucma_init_qp_attr+0xa4/0xb10 drivers/infiniband/core/ucma.c:1214
 ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732

Bytes 40-59 of 144 are uninitialized
Memory access of size 144 starts at ffff888167523b00
Data copied to user address 0000000020000100

CPU: 1 PID: 25910 Comm: syz-executor.1 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
=====================================================

Fixes: 4ba66093bdc6 ("IB/core: Check for global flag when using ah_attr")
Link: https://lore.kernel.org/r/0e9dd51f93410b7b2f4f5562f52befc878b71afa.1641298868.git.leonro@nvidia.com
Reported-by: syzbot+6d532fa8f9463da290bc@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/core/uverbs_marshall.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/core/uverbs_marshall.c
+++ b/drivers/infiniband/core/uverbs_marshall.c
@@ -66,7 +66,7 @@ void ib_copy_ah_attr_to_user(struct ib_d
 	struct rdma_ah_attr *src = ah_attr;
 	struct rdma_ah_attr conv_ah;
 
-	memset(&dst->grh.reserved, 0, sizeof(dst->grh.reserved));
+	memset(&dst->grh, 0, sizeof(dst->grh));
 
 	if ((ah_attr->type == RDMA_AH_ATTR_TYPE_OPA) &&
 	    (rdma_ah_get_dlid(ah_attr) > be16_to_cpu(IB_LID_PERMISSIVE)) &&

[PATCH 4.19 05/21] mac80211: initialize variable have_higher_than_11mbit

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

commit 68a18ad71378a56858141c4449e02a30c829763e upstream.

Clang static analysis reports this warnings

mlme.c:5332:7: warning: Branch condition evaluates to a
  garbage value
    have_higher_than_11mbit)
    ^~~~~~~~~~~~~~~~~~~~~~~

have_higher_than_11mbit is only set to true some of the time in
ieee80211_get_rates() but is checked all of the time.  So
have_higher_than_11mbit needs to be initialized to false.

Fixes: 5d6a1b069b7f ("mac80211: set basic rates earlier")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/mlme.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -4788,7 +4788,7 @@ static int ieee80211_prep_connection(str
 	 */
 	if (new_sta) {
 		u32 rates = 0, basic_rates = 0;
-		bool have_higher_than_11mbit;
+		bool have_higher_than_11mbit = false;
 		int min_rate = INT_MAX, min_rate_index = -1;
 		const struct cfg80211_bss_ies *ies;
 		int shift = ieee80211_vif_get_shift(&sdata->vif);

[PATCH 4.19 06/21] i40e: fix use-after-free in i40e_sync_filters_subtask()

[Greg Kroah-Hartman]

From: Di Zhu <zhudi2@huawei.com>

commit 3116f59c12bd24c513194cd3acb3ec1f7d468954 upstream.

Using ifconfig command to delete the ipv6 address will cause
the i40e network card driver to delete its internal mac_filter and
i40e_service_task kernel thread will concurrently access the mac_filter.
These two processes are not protected by lock
so causing the following use-after-free problems.

 print_address_description+0x70/0x360
 ? vprintk_func+0x5e/0xf0
 kasan_report+0x1b2/0x330
 i40e_sync_vsi_filters+0x4f0/0x1850 [i40e]
 i40e_sync_filters_subtask+0xe3/0x130 [i40e]
 i40e_service_task+0x195/0x24c0 [i40e]
 process_one_work+0x3f5/0x7d0
 worker_thread+0x61/0x6c0
 ? process_one_work+0x7d0/0x7d0
 kthread+0x1c3/0x1f0
 ? kthread_park+0xc0/0xc0
 ret_from_fork+0x35/0x40

Allocated by task 2279810:
 kasan_kmalloc+0xa0/0xd0
 kmem_cache_alloc_trace+0xf3/0x1e0
 i40e_add_filter+0x127/0x2b0 [i40e]
 i40e_add_mac_filter+0x156/0x190 [i40e]
 i40e_addr_sync+0x2d/0x40 [i40e]
 __hw_addr_sync_dev+0x154/0x210
 i40e_set_rx_mode+0x6d/0xf0 [i40e]
 __dev_set_rx_mode+0xfb/0x1f0
 __dev_mc_add+0x6c/0x90
 igmp6_group_added+0x214/0x230
 __ipv6_dev_mc_inc+0x338/0x4f0
 addrconf_join_solict.part.7+0xa2/0xd0
 addrconf_dad_work+0x500/0x980
 process_one_work+0x3f5/0x7d0
 worker_thread+0x61/0x6c0
 kthread+0x1c3/0x1f0
 ret_from_fork+0x35/0x40

Freed by task 2547073:
 __kasan_slab_free+0x130/0x180
 kfree+0x90/0x1b0
 __i40e_del_filter+0xa3/0xf0 [i40e]
 i40e_del_mac_filter+0xf3/0x130 [i40e]
 i40e_addr_unsync+0x85/0xa0 [i40e]
 __hw_addr_sync_dev+0x9d/0x210
 i40e_set_rx_mode+0x6d/0xf0 [i40e]
 __dev_set_rx_mode+0xfb/0x1f0
 __dev_mc_del+0x69/0x80
 igmp6_group_dropped+0x279/0x510
 __ipv6_dev_mc_dec+0x174/0x220
 addrconf_leave_solict.part.8+0xa2/0xd0
 __ipv6_ifa_notify+0x4cd/0x570
 ipv6_ifa_notify+0x58/0x80
 ipv6_del_addr+0x259/0x4a0
 inet6_addr_del+0x188/0x260
 addrconf_del_ifaddr+0xcc/0x130
 inet6_ioctl+0x152/0x190
 sock_do_ioctl+0xd8/0x2b0
 sock_ioctl+0x2e5/0x4c0
 do_vfs_ioctl+0x14e/0xa80
 ksys_ioctl+0x7c/0xa0
 __x64_sys_ioctl+0x42/0x50
 do_syscall_64+0x98/0x2c0
 entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Di Zhu <zhudi2@huawei.com>
Signed-off-by: Rui Zhang <zhangrui182@huawei.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -96,6 +96,24 @@ MODULE_VERSION(DRV_VERSION);
 
 static struct workqueue_struct *i40e_wq;
 
+static void netdev_hw_addr_refcnt(struct i40e_mac_filter *f,
+				  struct net_device *netdev, int delta)
+{
+	struct netdev_hw_addr *ha;
+
+	if (!f || !netdev)
+		return;
+
+	netdev_for_each_mc_addr(ha, netdev) {
+		if (ether_addr_equal(ha->addr, f->macaddr)) {
+			ha->refcount += delta;
+			if (ha->refcount <= 0)
+				ha->refcount = 1;
+			break;
+		}
+	}
+}
+
 /**
  * i40e_allocate_dma_mem_d - OS specific memory alloc for shared code
  * @hw:   pointer to the HW structure
@@ -2005,6 +2023,7 @@ static void i40e_undo_add_filter_entries
 	hlist_for_each_entry_safe(new, h, from, hlist) {
 		/* We can simply free the wrapper structure */
 		hlist_del(&new->hlist);
+		netdev_hw_addr_refcnt(new->f, vsi->netdev, -1);
 		kfree(new);
 	}
 }
@@ -2341,6 +2360,10 @@ int i40e_sync_vsi_filters(struct i40e_vs
 						       &tmp_add_list,
 						       &tmp_del_list,
 						       vlan_filters);
+
+		hlist_for_each_entry(new, &tmp_add_list, hlist)
+			netdev_hw_addr_refcnt(new->f, vsi->netdev, 1);
+
 		if (retval)
 			goto err_no_memory_locked;
 
@@ -2473,6 +2496,7 @@ int i40e_sync_vsi_filters(struct i40e_vs
 			if (new->f->state == I40E_FILTER_NEW)
 				new->f->state = new->state;
 			hlist_del(&new->hlist);
+			netdev_hw_addr_refcnt(new->f, vsi->netdev, -1);
 			kfree(new);
 		}
 		spin_unlock_bh(&vsi->mac_filter_hash_lock);

[PATCH 4.19 07/21] i40e: Fix incorrect netdevs real number of RX/TX queues

[Greg Kroah-Hartman]

From: Jedrzej Jagielski <jedrzej.jagielski@intel.com>

commit e738451d78b2f8a9635d66c6a87f304b4d965f7a upstream.

There was a wrong queues representation in sysfs during
driver's reinitialization in case of online cpus number is
less than combined queues. It was caused by stopped
NetworkManager, which is responsible for calling vsi_open
function during driver's initialization.
In specific situation (ex. 12 cpus online) there were 16 queues
in /sys/class/net/<iface>/queues. In case of modifying queues with
value higher, than number of online cpus, then it caused write
errors and other errors.
Add updating of sysfs's queues representation during driver
initialization.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c |   32 +++++++++++++++++++++-------
 1 file changed, 25 insertions(+), 7 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -7741,6 +7741,27 @@ int i40e_open(struct net_device *netdev)
 }
 
 /**
+ * i40e_netif_set_realnum_tx_rx_queues - Update number of tx/rx queues
+ * @vsi: vsi structure
+ *
+ * This updates netdev's number of tx/rx queues
+ *
+ * Returns status of setting tx/rx queues
+ **/
+static int i40e_netif_set_realnum_tx_rx_queues(struct i40e_vsi *vsi)
+{
+	int ret;
+
+	ret = netif_set_real_num_rx_queues(vsi->netdev,
+					   vsi->num_queue_pairs);
+	if (ret)
+		return ret;
+
+	return netif_set_real_num_tx_queues(vsi->netdev,
+					    vsi->num_queue_pairs);
+}
+
+/**
  * i40e_vsi_open -
  * @vsi: the VSI to open
  *
@@ -7776,13 +7797,7 @@ int i40e_vsi_open(struct i40e_vsi *vsi)
 			goto err_setup_rx;
 
 		/* Notify the stack of the actual queue counts. */
-		err = netif_set_real_num_tx_queues(vsi->netdev,
-						   vsi->num_queue_pairs);
-		if (err)
-			goto err_set_queues;
-
-		err = netif_set_real_num_rx_queues(vsi->netdev,
-						   vsi->num_queue_pairs);
+		err = i40e_netif_set_realnum_tx_rx_queues(vsi);
 		if (err)
 			goto err_set_queues;
 
@@ -12811,6 +12826,9 @@ struct i40e_vsi *i40e_vsi_setup(struct i
 		ret = i40e_config_netdev(vsi);
 		if (ret)
 			goto err_netdev;
+		ret = i40e_netif_set_realnum_tx_rx_queues(vsi);
+		if (ret)
+			goto err_netdev;
 		ret = register_netdev(vsi->netdev);
 		if (ret)
 			goto err_netdev;

[PATCH 4.19 08/21] ipv6: Check attribute length for RTA_GATEWAY in multipath route

[Greg Kroah-Hartman]

From: David Ahern <dsahern@kernel.org>

commit 4619bcf91399f00a40885100fb61d594d8454033 upstream.

Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as
does the current nla_get_in6_addr. nla_memcpy protects against accessing
memory greater than what is in the attribute, but there is no check
requiring the attribute to have an IPv6 address. Add it.

Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/route.c |   21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -4413,6 +4413,19 @@ static void ip6_route_mpath_notify(struc
 		inet6_rt_notify(RTM_NEWROUTE, rt, info, nlflags);
 }
 
+static int fib6_gw_from_attr(struct in6_addr *gw, struct nlattr *nla,
+			     struct netlink_ext_ack *extack)
+{
+	if (nla_len(nla) < sizeof(*gw)) {
+		NL_SET_ERR_MSG(extack, "Invalid IPv6 address in RTA_GATEWAY");
+		return -EINVAL;
+	}
+
+	*gw = nla_get_in6_addr(nla);
+
+	return 0;
+}
+
 static int ip6_route_multipath_add(struct fib6_config *cfg,
 				   struct netlink_ext_ack *extack)
 {
@@ -4453,7 +4466,13 @@ static int ip6_route_multipath_add(struc
 
 			nla = nla_find(attrs, attrlen, RTA_GATEWAY);
 			if (nla) {
-				r_cfg.fc_gateway = nla_get_in6_addr(nla);
+				int ret;
+
+				ret = fib6_gw_from_attr(&r_cfg.fc_gateway, nla,
+							extack);
+				if (ret)
+					return ret;
+
 				r_cfg.fc_flags |= RTF_GATEWAY;
 			}
 			r_cfg.fc_encap = nla_find(attrs, attrlen, RTA_ENCAP);

[PATCH 4.19 09/21] ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route

[Greg Kroah-Hartman]

From: David Ahern <dsahern@kernel.org>

commit 1ff15a710a862db1101b97810af14aedc835a86a upstream.

Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold
an IPv6 address.

Fixes: 6b9ea5a64ed5 ("ipv6: fix multipath route replace error recovery")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/route.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -4606,7 +4606,11 @@ static int ip6_route_multipath_del(struc
 
 			nla = nla_find(attrs, attrlen, RTA_GATEWAY);
 			if (nla) {
-				nla_memcpy(&r_cfg.fc_gateway, nla, 16);
+				err = fib6_gw_from_attr(&r_cfg.fc_gateway, nla,
+							extack);
+				if (err)
+					return err;
+
 				r_cfg.fc_flags |= RTF_GATEWAY;
 			}
 		}

[PATCH 4.19 10/21] sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 7d18a07897d07495ee140dd319b0e9265c0f68ba upstream.

tx_queue_len can be set to ~0U, we need to be more
careful about overflows.

__fls(0) is undefined, as this report shows:

UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24
shift exponent 51770272 is too large for 32-bit type 'int'
CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106
 ubsan_epilogue lib/ubsan.c:151 [inline]
 __ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330
 qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430
 qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253
 tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660
 rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571
 netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 ____sys_sendmsg+0x5b9/0x910 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 __sys_sendmsg+0x280/0x370 net/socket.c:2492
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_qfq.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/net/sched/sch_qfq.c
+++ b/net/sched/sch_qfq.c
@@ -1430,10 +1430,8 @@ static int qfq_init_qdisc(struct Qdisc *
 	if (err < 0)
 		return err;
 
-	if (qdisc_dev(sch)->tx_queue_len + 1 > QFQ_MAX_AGG_CLASSES)
-		max_classes = QFQ_MAX_AGG_CLASSES;
-	else
-		max_classes = qdisc_dev(sch)->tx_queue_len + 1;
+	max_classes = min_t(u64, (u64)qdisc_dev(sch)->tx_queue_len + 1,
+			    QFQ_MAX_AGG_CLASSES);
 	/* max_cl_shift = floor(log_2(max_classes)) */
 	max_cl_shift = __fls(max_classes);
 	q->max_agg_classes = 1<<max_cl_shift;

[PATCH 4.19 11/21] xfs: map unwritten blocks in XFS_IOC_{ALLOC,FREE}SP just like fallocate

[Greg Kroah-Hartman]

From: Darrick J. Wong <djwong@kernel.org>

commit 983d8e60f50806f90534cc5373d0ce867e5aaf79 upstream.

The old ALLOCSP/FREESP ioctls in XFS can be used to preallocate space at
the end of files, just like fallocate and RESVSP.  Make the behavior
consistent with the other ioctls.

Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/xfs_ioctl.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -701,7 +701,8 @@ xfs_ioc_space(
 		flags |= XFS_PREALLOC_CLEAR;
 		if (bf->l_start > XFS_ISIZE(ip)) {
 			error = xfs_alloc_file_space(ip, XFS_ISIZE(ip),
-					bf->l_start - XFS_ISIZE(ip), 0);
+					bf->l_start - XFS_ISIZE(ip),
+					XFS_BMAPI_PREALLOC);
 			if (error)
 				goto out_unlock;
 		}

[PATCH 4.19 12/21] power: reset: ltc2952: Fix use of floating point literals

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1497
Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/power/reset/ltc2952-poweroff.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/power/reset/ltc2952-poweroff.c
+++ b/drivers/power/reset/ltc2952-poweroff.c
@@ -170,8 +170,8 @@ static void ltc2952_poweroff_kill(void)
 
 static void ltc2952_poweroff_default(struct ltc2952_poweroff *data)
 {
-	data->wde_interval = 300L * 1E6L;
-	data->trigger_delay = ktime_set(2, 500L*1E6L);
+	data->wde_interval = 300L * NSEC_PER_MSEC;
+	data->trigger_delay = ktime_set(2, 500L * NSEC_PER_MSEC);
 
 	hrtimer_init(&data->timer_trigger, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	data->timer_trigger.function = ltc2952_poweroff_timer_trigger;

[PATCH 4.19 13/21] rndis_host: support Hytera digital radios

[Greg Kroah-Hartman]

From: Thomas Toye <thomas@toye.io>

commit 29262e1f773b4b6a43711120be564c57fca07cfb upstream.

Hytera makes a range of digital (DMR) radios. These radios can be
programmed to a allow a computer to control them over Ethernet over USB,
either using NCM or RNDIS.

This commit adds support for RNDIS for Hytera radios. I tested with a
Hytera PD785 and a Hytera MD785G. When these radios are programmed to
set up a Radio to PC Network using RNDIS, an USB interface will be added
with class 2 (Communications), subclass 2 (Abstract Modem Control) and
an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT
RNDIS?").

This patch is similar to the solution of this StackOverflow user, but
that only works for the Hytera MD785:
https://stackoverflow.com/a/53550858

To use the "Radio to PC Network" functionality of Hytera DMR radios, the
radios need to be programmed correctly in CPS (Hytera's Customer
Programming Software). "Forward to PC" should be checked in "Network"
(under "General Setting" in "Conventional") and the "USB Network
Communication Protocol" should be set to RNDIS.

Signed-off-by: Thomas Toye <thomas@toye.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/rndis_host.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -621,6 +621,11 @@ static const struct usb_device_id	produc
 				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
 	.driver_info = (unsigned long) &rndis_poll_status_info,
 }, {
+	/* Hytera Communications DMR radios' "Radio to PC Network" */
+	USB_VENDOR_AND_INTERFACE_INFO(0x238b,
+				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+	.driver_info = (unsigned long)&rndis_info,
+}, {
 	/* RNDIS is MSFT's un-official variant of CDC ACM */
 	USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
 	.driver_info = (unsigned long) &rndis_info,

[PATCH 4.19 14/21] phonet: refcount leak in pep_sock_accep

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

commit bcd0f93353326954817a4f9fa55ec57fb38acbb0 upstream.

sock_hold(sk) is invoked in pep_sock_accept(), but __sock_put(sk) is not
invoked in subsequent failure branches(pep_accept_conn() != 0).

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20211209082839.33985-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Aayush Agarwal <aayush.a.agarwal@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/phonet/pep.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -881,6 +881,7 @@ static struct sock *pep_sock_accept(stru
 
 	err = pep_accept_conn(newsk, skb);
 	if (err) {
+		__sock_put(sk);
 		sock_put(newsk);
 		newsk = NULL;
 		goto drop;

[PATCH 4.19 15/21] ipv6: Continue processing multipath route even if gateway attribute is invalid

[Greg Kroah-Hartman]

From: David Ahern <dsahern@kernel.org>

[ Upstream commit e30a845b0376eb51c9c94f56bbd53b2e08ba822f ]

ip6_route_multipath_del loop continues processing the multipath
attribute even if delete of a nexthop path fails. For consistency,
do the same if the gateway attribute is invalid.

Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/route.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 1bc81be07ccda..8a437c20eeccd 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -4608,8 +4608,10 @@ static int ip6_route_multipath_del(struct fib6_config *cfg,
 			if (nla) {
 				err = fib6_gw_from_attr(&r_cfg.fc_gateway, nla,
 							extack);
-				if (err)
-					return err;
+				if (err) {
+					last_err = err;
+					goto next_rtnh;
+				}
 
 				r_cfg.fc_flags |= RTF_GATEWAY;
 			}
@@ -4618,6 +4620,7 @@ static int ip6_route_multipath_del(struct fib6_config *cfg,
 		if (err)
 			last_err = err;
 
+next_rtnh:
 		rtnh = rtnh_next(rtnh, &remaining);
 	}
 
-- 
2.34.1

[PATCH 4.19 16/21] ipv6: Do cleanup if attribute validation fails in multipath route

[Greg Kroah-Hartman]

From: David Ahern <dsahern@kernel.org>

[ Upstream commit 95bdba23b5b4aa75fe3e6c84335e638641c707bb ]

As Nicolas noted, if gateway validation fails walking the multipath
attribute the code should jump to the cleanup to free previously
allocated memory.

Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/route.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 8a437c20eeccd..7e3ab23fc995c 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -4466,12 +4466,10 @@ static int ip6_route_multipath_add(struct fib6_config *cfg,
 
 			nla = nla_find(attrs, attrlen, RTA_GATEWAY);
 			if (nla) {
-				int ret;
-
-				ret = fib6_gw_from_attr(&r_cfg.fc_gateway, nla,
+				err = fib6_gw_from_attr(&r_cfg.fc_gateway, nla,
 							extack);
-				if (ret)
-					return ret;
+				if (err)
+					goto cleanup;
 
 				r_cfg.fc_flags |= RTF_GATEWAY;
 			}
-- 
2.34.1

[PATCH 4.19 17/21] usb: mtu3: fix interval value for intr and isoc

[Greg Kroah-Hartman]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

[ Upstream commit e3d4621c22f90c33321ae6a6baab60cdb8e5a77c ]

Use the Interval value from isoc/intr endpoint descriptor, no need
minus one. The original code doesn't cause transfer error for
normal cases, but it may have side effect with respond time of ERDY
or tPingTimeout.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211218095749.6250-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/mtu3/mtu3_gadget.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 07a6ee8db6123..9f0c949820bf7 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -82,7 +82,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
 		if (usb_endpoint_xfer_int(desc) ||
 				usb_endpoint_xfer_isoc(desc)) {
 			interval = desc->bInterval;
-			interval = clamp_val(interval, 1, 16) - 1;
+			interval = clamp_val(interval, 1, 16);
 			if (usb_endpoint_xfer_isoc(desc) && comp_desc)
 				mult = comp_desc->bmAttributes;
 		}
@@ -94,7 +94,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
 		if (usb_endpoint_xfer_isoc(desc) ||
 				usb_endpoint_xfer_int(desc)) {
 			interval = desc->bInterval;
-			interval = clamp_val(interval, 1, 16) - 1;
+			interval = clamp_val(interval, 1, 16);
 			mult = usb_endpoint_maxp_mult(desc) - 1;
 		}
 		break;
-- 
2.34.1

[PATCH 4.19 18/21] scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()

[Greg Kroah-Hartman]

From: Lixiaokeng <lixiaokeng@huawei.com>

[ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ]

|- iscsi_if_destroy_conn            |-dev_attr_show
 |-iscsi_conn_teardown
  |-spin_lock_bh                     |-iscsi_sw_tcp_conn_get_param

  |-kfree(conn->persistent_address)   |-iscsi_conn_get_param
  |-kfree(conn->local_ipaddr)
                                       ==>|-read persistent_address
                                       ==>|-read local_ipaddr
  |-spin_unlock_bh

When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a
UAF may be triggered.

Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com
Reported-by: Lu Tixiong <lutianxiong@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Lixiaokeng <lixiaokeng@huawei.com>
Signed-off-by: Linfeilong <linfeilong@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libiscsi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 5607fe8541c3a..cb314e3a0fc7a 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2986,6 +2986,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
 {
 	struct iscsi_conn *conn = cls_conn->dd_data;
 	struct iscsi_session *session = conn->session;
+	char *tmp_persistent_address = conn->persistent_address;
+	char *tmp_local_ipaddr = conn->local_ipaddr;
 
 	del_timer_sync(&conn->transport_timer);
 
@@ -3007,8 +3009,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
 	spin_lock_bh(&session->frwd_lock);
 	free_pages((unsigned long) conn->data,
 		   get_order(ISCSI_DEF_MAX_RECV_SEG_LEN));
-	kfree(conn->persistent_address);
-	kfree(conn->local_ipaddr);
 	/* regular RX path uses back_lock */
 	spin_lock_bh(&session->back_lock);
 	kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task,
@@ -3020,6 +3020,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
 	mutex_unlock(&session->eh_mutex);
 
 	iscsi_destroy_conn(cls_conn);
+	kfree(tmp_persistent_address);
+	kfree(tmp_local_ipaddr);
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_teardown);
 
-- 
2.34.1

[PATCH 4.19 19/21] ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivate

[Greg Kroah-Hartman]

From: William Zhao <wizhao@redhat.com>

[ Upstream commit c1833c3964d5bd8c163bd4e01736a38bc473cb8a ]

The "__ip6_tnl_parm" struct was left uninitialized causing an invalid
load of random data when the "__ip6_tnl_parm" struct was used elsewhere.
As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access
the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and
containing random data, the UBSAN detected that "collect_md" held a
non-boolean value.

The UBSAN issue is as follows:
===============================================================
UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14
load of value 30 is not a valid value for type '_Bool'
CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x57
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value+0x66/0x70
? __cpuhp_setup_state+0x1d3/0x210
ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel]
vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? vti6_rcv+0x100/0x100 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? rcu_read_lock_bh_held+0xc0/0xc0
? lock_acquired+0x262/0xb10
dev_hard_start_xmit+0x1e6/0x820
__dev_queue_xmit+0x2079/0x3340
? mark_lock.part.52+0xf7/0x1050
? netdev_core_pick_tx+0x290/0x290
? kvm_clock_read+0x14/0x30
? kvm_sched_clock_read+0x5/0x10
? sched_clock_cpu+0x15/0x200
? find_held_lock+0x3a/0x1c0
? lock_release+0x42f/0xc90
? lock_downgrade+0x6b0/0x6b0
? mark_held_locks+0xb7/0x120
? neigh_connected_output+0x31f/0x470
? lockdep_hardirqs_on+0x79/0x100
? neigh_connected_output+0x31f/0x470
? ip6_finish_output2+0x9b0/0x1d90
? rcu_read_lock_bh_held+0x62/0xc0
? ip6_finish_output2+0x9b0/0x1d90
ip6_finish_output2+0x9b0/0x1d90
? ip6_append_data+0x330/0x330
? ip6_mtu+0x166/0x370
? __ip6_finish_output+0x1ad/0xfb0
? nf_hook_slow+0xa6/0x170
ip6_output+0x1fb/0x710
? nf_hook.constprop.32+0x317/0x430
? ip6_finish_output+0x180/0x180
? __ip6_finish_output+0xfb0/0xfb0
? lock_is_held_type+0xd9/0x130
ndisc_send_skb+0xb33/0x1590
? __sk_mem_raise_allocated+0x11cf/0x1560
? dst_output+0x4a0/0x4a0
? ndisc_send_rs+0x432/0x610
addrconf_dad_completed+0x30c/0xbb0
? addrconf_rs_timer+0x650/0x650
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
? addrconf_dad_completed+0xbb0/0xbb0
? rcu_read_lock_sched_held+0xaf/0xe0
? rcu_read_lock_bh_held+0xc0/0xc0
process_one_work+0x97b/0x1740
? pwq_dec_nr_in_flight+0x270/0x270
worker_thread+0x87/0xbf0
? process_one_work+0x1740/0x1740
kthread+0x3ac/0x490
? set_kthread_struct+0x100/0x100
ret_from_fork+0x22/0x30
</TASK>
===============================================================

The solution is to initialize "__ip6_tnl_parm" struct to zeros in the
"vti6_siocdevprivate()" function.

Signed-off-by: William Zhao <wizhao@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_vti.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index 290badfe70e06..866ce815625e5 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -799,6 +799,8 @@ vti6_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	struct net *net = dev_net(dev);
 	struct vti6_net *ip6n = net_generic(net, vti6_net_id);
 
+	memset(&p1, 0, sizeof(p1));
+
 	switch (cmd) {
 	case SIOCGETTUNNEL:
 		if (dev == ip6n->fb_tnl_dev) {
-- 
2.34.1

[PATCH 4.19 20/21] net: udp: fix alignment problem in udp4_seq_show()

[Greg Kroah-Hartman]

From: yangxingwu <xingwu.yang@gmail.com>

[ Upstream commit 6c25449e1a32c594d743df8e8258e8ef870b6a77 ]

$ cat /pro/net/udp

before:

  sl  local_address rem_address   st tx_queue rx_queue tr tm->when
26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000
26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000
27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000

after:

   sl  local_address rem_address   st tx_queue rx_queue tr tm->when
26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000
26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000
27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000

Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/udp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index fce32f3e42b54..b7acb6afdbce6 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2845,7 +2845,7 @@ int udp4_seq_show(struct seq_file *seq, void *v)
 {
 	seq_setwidth(seq, 127);
 	if (v == SEQ_START_TOKEN)
-		seq_puts(seq, "  sl  local_address rem_address   st tx_queue "
+		seq_puts(seq, "   sl  local_address rem_address   st tx_queue "
 			   "rx_queue tr tm->when retrnsmt   uid  timeout "
 			   "inode ref pointer drops");
 	else {
-- 
2.34.1

[PATCH 4.19 21/21] mISDN: change function names to avoid conflicts

[Greg Kroah-Hartman]

From: wolfgang huang <huangjinhui@kylinos.cn>

[ Upstream commit 8b5fdfc57cc2471179d1c51081424ded833c16c8 ]

As we build for mips, we meet following error. l1_init error with
multiple definition. Some architecture devices usually marked with
l1, l2, lxx as the start-up phase. so we change the mISDN function
names, align with Isdnl2_xxx.

mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init':
(.text+0x890): multiple definition of `l1_init'; \
arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here
make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1

Signed-off-by: wolfgang huang <huangjinhui@kylinos.cn>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/core.c   | 6 +++---
 drivers/isdn/mISDN/core.h   | 4 ++--
 drivers/isdn/mISDN/layer1.c | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/isdn/mISDN/core.c b/drivers/isdn/mISDN/core.c
index faf505462a4f5..f5a06a6fb297f 100644
--- a/drivers/isdn/mISDN/core.c
+++ b/drivers/isdn/mISDN/core.c
@@ -390,7 +390,7 @@ mISDNInit(void)
 	err = mISDN_inittimer(&debug);
 	if (err)
 		goto error2;
-	err = l1_init(&debug);
+	err = Isdnl1_Init(&debug);
 	if (err)
 		goto error3;
 	err = Isdnl2_Init(&debug);
@@ -404,7 +404,7 @@ mISDNInit(void)
 error5:
 	Isdnl2_cleanup();
 error4:
-	l1_cleanup();
+	Isdnl1_cleanup();
 error3:
 	mISDN_timer_cleanup();
 error2:
@@ -417,7 +417,7 @@ static void mISDN_cleanup(void)
 {
 	misdn_sock_cleanup();
 	Isdnl2_cleanup();
-	l1_cleanup();
+	Isdnl1_cleanup();
 	mISDN_timer_cleanup();
 	class_unregister(&mISDN_class);
 
diff --git a/drivers/isdn/mISDN/core.h b/drivers/isdn/mISDN/core.h
index 52695bb81ee7a..3c039b6ade2e1 100644
--- a/drivers/isdn/mISDN/core.h
+++ b/drivers/isdn/mISDN/core.h
@@ -69,8 +69,8 @@ struct Bprotocol	*get_Bprotocol4id(u_int);
 extern int	mISDN_inittimer(u_int *);
 extern void	mISDN_timer_cleanup(void);
 
-extern int	l1_init(u_int *);
-extern void	l1_cleanup(void);
+extern int	Isdnl1_Init(u_int *);
+extern void	Isdnl1_cleanup(void);
 extern int	Isdnl2_Init(u_int *);
 extern void	Isdnl2_cleanup(void);
 
diff --git a/drivers/isdn/mISDN/layer1.c b/drivers/isdn/mISDN/layer1.c
index 3192b0eb39445..284d3a9c7df7d 100644
--- a/drivers/isdn/mISDN/layer1.c
+++ b/drivers/isdn/mISDN/layer1.c
@@ -407,7 +407,7 @@ create_l1(struct dchannel *dch, dchannel_l1callback *dcb) {
 EXPORT_SYMBOL(create_l1);
 
 int
-l1_init(u_int *deb)
+Isdnl1_Init(u_int *deb)
 {
 	debug = deb;
 	l1fsm_s.state_count = L1S_STATE_COUNT;
@@ -418,7 +418,7 @@ l1_init(u_int *deb)
 }
 
 void
-l1_cleanup(void)
+Isdnl1_cleanup(void)
 {
 	mISDN_FsmFree(&l1fsm_s);
 }
-- 
2.34.1

Re: [PATCH 4.19 06/21] i40e: fix use-after-free in i40e_sync_filters_subtask()

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1118 bytes --]

Hi!

> commit 3116f59c12bd24c513194cd3acb3ec1f7d468954 upstream.
> 
> Using ifconfig command to delete the ipv6 address will cause
> the i40e network card driver to delete its internal mac_filter and
> i40e_service_task kernel thread will concurrently access the mac_filter.
> These two processes are not protected by lock
> so causing the following use-after-free problems.

Ok, but...

> +static void netdev_hw_addr_refcnt(struct i40e_mac_filter *f,
> +				  struct net_device *netdev, int delta)
> +{
> +	struct netdev_hw_addr *ha;
> +
> +	if (!f || !netdev)
> +		return;
> +
> +	netdev_for_each_mc_addr(ha, netdev) {
> +		if (ether_addr_equal(ha->addr, f->macaddr)) {
> +			ha->refcount += delta;
> +			if (ha->refcount <= 0)
> +				ha->refcount = 1;
> +			break;
> +		}
> +	}
> +}

What is going on here? Is refcount expected to underflow under normal
operation? Should we at least have WARN_ON there?

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 00/21] 4.19.225-rc1 review

[Jon Hunter]

On Mon, 10 Jan 2022 08:23:01 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.225 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Jan 2022 07:18:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.225-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.19:
    10 builds:	10 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version:	4.19.225-rc1-g688dd97d1841
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.19 00/21] 4.19.225-rc1 review

[Shuah Khan]

On 1/10/22 12:23 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.225 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Jan 2022 07:18:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.225-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 00/21] 4.19.225-rc1 review

[Guenter Roeck]

On Mon, Jan 10, 2022 at 08:23:01AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.225 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Jan 2022 07:18:05 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 422 pass: 422 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 00/21] 4.19.225-rc1 review

[Samuel Zou]

On 2022/1/10 15:23, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.225 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Jan 2022 07:18:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.225-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 4.19.225-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.225-rc1
Commit: 688dd97d1841df9fc689897105df7075ed3c50c9
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8942
passed: 8942
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8942
passed: 8942
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 4.19 00/21] 4.19.225-rc1 review

[Naresh Kamboju]

On Mon, 10 Jan 2022 at 12:57, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.225 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 12 Jan 2022 07:18:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.225-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.19.225-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.19.y
* git commit: 688dd97d1841df9fc689897105df7075ed3c50c9
* git describe: v4.19.224-22-g688dd97d1841
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.224-22-g688dd97d1841

## Test Regressions (compared to v4.19.223)
No test regressions found.

## Metric Regressions (compared to v4.19.223)
No metric regressions found.

## Test Fixes (compared to v4.19.223)
No test fixes found.

## Metric Fixes (compared to v4.19.223)
No metric fixes found.

## Test result summary
total: 78464, pass: 64044, fail: 626, skip: 12386, xfail: 1408

## Build Summary
* arm: 254 total, 246 passed, 8 failed
* arm64: 35 total, 35 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 26 total, 26 passed, 0 failed
* powerpc: 52 total, 48 passed, 4 failed
* s390: 12 total, 12 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 34 total, 34 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/21] 4.19.225-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 663 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.225 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 00/21] 4.19.225-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Jan 10, 2022 at 08:23:01AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.225 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Jan 2022 07:18:05 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20220106): 63 configs -> no failure
arm (gcc version 11.2.1 20220106): 116 configs -> no new failure
arm64 (gcc version 11.2.1 20220106): 2 configs -> no failure
x86_64 (gcc version 11.2.1 20220106): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/609


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip