[PATCH 4.19 000/239] 4.19.226-rc1 review

[PATCH 4.19 000/239] 4.19.226-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.226 release.
There are 239 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.226-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.226-rc1

Amir Goldstein <amir73il@gmail.com>
    fuse: fix live lock in fuse_iget()

Miklos Szeredi <mszeredi@redhat.com>
    fuse: fix bad inode

Ben Hutchings <ben@decadent.org.uk>
    mips,s390,sh,sparc: gup: Work around the "COW can break either way" issue

Doyle, Patrick <pdoyle@irobot.com>
    mtd: nand: bbt: Fix corner case in bad block table handling

Miaoqian Lin <linmq006@gmail.com>
    lib82596: Fix IRQ check in sni_82596_probe

Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
    scripts/dtc: dtx_diff: remove broken example from help text

Sergey Shtylyov <s.shtylyov@omp.ru>
    bcmgenet: add WOL IRQ check

Kevin Bracey <kevin@bracey.fi>
    net_sched: restore "mpu xxx" handling

Tudor Ambarus <tudor.ambarus@microchip.com>
    dmaengine: at_xdmac: Fix at_xdmac_lld struct definition

Tudor Ambarus <tudor.ambarus@microchip.com>
    dmaengine: at_xdmac: Fix lld view setting

Tudor Ambarus <tudor.ambarus@microchip.com>
    dmaengine: at_xdmac: Print debug message after realeasing the lock

Tudor Ambarus <tudor.ambarus@microchip.com>
    dmaengine: at_xdmac: Don't start transactions at tx_submit level

Guillaume Nault <gnault@redhat.com>
    libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route()

Eric Dumazet <edumazet@google.com>
    netns: add schedule point in ops_exit_list()

Laurence de Bruxelles <lfdebrux@gmail.com>
    rtc: pxa: fix null pointer dereference

Robert Hancock <robert.hancock@calian.com>
    net: axienet: fix number of TX ring slots for available check

Robert Hancock <robert.hancock@calian.com>
    net: axienet: Wait for PhyRstCmplt after core reset

Eric Dumazet <edumazet@google.com>
    af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress

Miaoqian Lin <linmq006@gmail.com>
    parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries

Tobias Waldekranz <tobias@waldekranz.com>
    net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module

Tobias Waldekranz <tobias@waldekranz.com>
    powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses

Anders Roxell <anders.roxell@linaro.org>
    powerpc/cell: Fix clang -Wimplicit-fallthrough warning

Amelie Delaunay <amelie.delaunay@foss.st.com>
    dmaengine: stm32-mdma: fix STM32_MDMA_CTBR_TSEL_MASK

Chengguang Xu <cgxu519@mykernel.net>
    RDMA/rxe: Fix a typo in opcode name

Yixing Liu <liuyixing1@huawei.com>
    RDMA/hns: Modify the mapping attribute of doorbell to device

Lukas Bulwahn <lukas.bulwahn@gmail.com>
    Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization

Suresh Udipi <sudipi@jp.adit-jv.com>
    media: rcar-csi2: Optimize the selection PHTW register

Ben Hutchings <ben@decadent.org.uk>
    firmware: Update Kconfig help text for Google firmware

Tony Lindgren <tony@atomide.com>
    ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs

Christian König <christian.koenig@amd.com>
    drm/radeon: fix error handling in radeon_driver_open_kms

Pascal Paillet <p.paillet@st.com>
    regulator: core: Let boot-on regulators be powered off

KaiChieh Chuang <kaichieh.chuang@mediatek.com>
    ASoC: dpcm: prevent snd_soc_dpcm use after free

Marek Vasut <marex@denx.de>
    crypto: stm32/crc32 - Fix kernel BUG triggered in probe()

Theodore Ts'o <tytso@mit.edu>
    ext4: don't use the orphan list when migrating an inode

Ye Bin <yebin10@huawei.com>
    ext4: Fix BUG_ON in ext4_bread when write quota data

Luís Henriques <lhenriques@suse.de>
    ext4: set csum seed in tmp inode while migrating to extents

Jan Kara <jack@suse.cz>
    ext4: make sure quota gets properly shutdown on error

Jan Kara <jack@suse.cz>
    ext4: make sure to reset inode lockdep class when quota enabling fails

Lucas Stach <l.stach@pengutronix.de>
    drm/etnaviv: limit submit sizes

Alexander Gordeev <agordeev@linux.ibm.com>
    s390/mm: fix 2KB pgtable release race

Ilan Peer <ilan.peer@intel.com>
    iwlwifi: mvm: Increase the scan timeout guard to 30 seconds

Andrey Ryabinin <arbn@yandex-team.com>
    cputime, cpuacct: Include guest time in user time in cpuacct.stat

Lukas Wunner <lukas@wunner.de>
    serial: Fix incorrect rs485 polarity on uart open

Petr Cvachoucek <cvachoucek@gmail.com>
    ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffers

Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
    rpmsg: core: Clean up resources on announce_create failure.

Yauhen Kharuzhy <jekhor@gmail.com>
    power: bq25890: Enable continuous conversion for ADC at charging

Tzung-Bi Shih <tzungbi@google.com>
    ASoC: mediatek: mt8173: fix device_node leak

Christoph Hellwig <hch@lst.de>
    scsi: sr: Don't use GFP_DMA

Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
    MIPS: Octeon: Fix build errors using clang

Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
    i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters

Ye Guojin <ye.guojin@zte.com.cn>
    MIPS: OCTEON: add put_device() after of_find_device_by_node()

Hari Bathini <hbathini@linux.ibm.com>
    powerpc: handle kdump appropriately with crash_kexec_post_notifiers option

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Set upper limit of processed events

Christophe Leroy <christophe.leroy@csgroup.eu>
    w1: Misuse of get_user()/put_user() reported by sparse

Joakim Tjernlund <joakim.tjernlund@infinera.com>
    i2c: mpc: Correct I2C reset procedure

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING

Heiner Kallweit <hkallweit1@gmail.com>
    i2c: i801: Don't silently correct invalid transfer size

Nicholas Piggin <npiggin@gmail.com>
    powerpc/watchdog: Fix missed watchdog reset due to memory ordering race

Julia Lawall <Julia.Lawall@lip6.fr>
    powerpc/btext: add missing of_node_put

Julia Lawall <Julia.Lawall@lip6.fr>
    powerpc/cell: add missing of_node_put

Julia Lawall <Julia.Lawall@lip6.fr>
    powerpc/powernv: add missing of_node_put

Julia Lawall <Julia.Lawall@lip6.fr>
    powerpc/6xx: add missing of_node_put

John David Anglin <dave.anglin@bell.net>
    parisc: Avoid calling faulthandler_disabled() twice

Lukas Wunner <lukas@wunner.de>
    serial: core: Keep mctrl register state and cached copy in sync

Lukas Wunner <lukas@wunner.de>
    serial: pl010: Drop CR register reset on set_termios

Konrad Dybcio <konrad.dybcio@somainline.org>
    regulator: qcom_smd: Align probe function with rpmh-regulator

Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
    net: gemini: allow any RGMII interface mode

Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
    net: phy: marvell: configure RGMII delays for 88E1118

Joe Thornber <ejt@redhat.com>
    dm space map common: add bounds check to sm_ll_lookup_bitmap()

Joe Thornber <ejt@redhat.com>
    dm btree: add a defensive bounds check to insert_at()

Ping-Ke Shih <pkshih@realtek.com>
    mac80211: allow non-standard VHT MCS-10/11

Florian Fainelli <f.fainelli@gmail.com>
    net: mdio: Demote probed message to debug print

Josef Bacik <josef@toxicpanda.com>
    btrfs: remove BUG_ON(!eie) in find_parent_nodes

Josef Bacik <josef@toxicpanda.com>
    btrfs: remove BUG_ON() in find_parent_nodes()

Thomas Weißschuh <linux@weissschuh.net>
    ACPI: battery: Add the ThinkPad "Not Charging" quirk

Zongmin Zhou <zhouzongmin@kylinos.cn>
    drm/amdgpu: fixup bad vram size on gmc v8

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPICA: Utilities: Avoid deleting the same object twice in a row

Mark Langsdorf <mlangsdo@redhat.com>
    ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions

Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>
    jffs2: GC deadlock reading a page that is used in jffs2_write_begin()

Randy Dunlap <rdunlap@infradead.org>
    um: registers: Rename function names to avoid conflicts and build problems

Ilan Peer <ilan.peer@intel.com>
    iwlwifi: mvm: Fix calculation of frame length

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: remove module loading failure message

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: fix leaks/bad data after failed firmware load

Zekun Shen <bruceshenzk@gmail.com>
    ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream

Kai-Heng Feng <kai.heng.feng@canonical.com>
    usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0

Thierry Reding <treding@nvidia.com>
    arm64: tegra: Adjust length of CCPLEX cluster MMIO region

Paul Moore <paul@paul-moore.com>
    audit: ensure userspace is penalized the same as the kernel when under pressure

Ulf Hansson <ulf.hansson@linaro.org>
    mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

Zhou Qingyang <zhou1615@umn.edu>
    media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()

Sean Young <sean@mess.org>
    media: igorplugusb: receiver overflow should be reported

Alistair Francis <alistair@alistair23.me>
    HID: quirks: Allow inverting the absolute X/Y values

Paolo Abeni <pabeni@redhat.com>
    bpf: Do not WARN in bpf_warn_invalid_xdp_action()

Suresh Kumar <surkumar@redhat.com>
    net: bonding: debug: avoid printing debug logs when bond is not notifying peers

Borislav Petkov <bp@suse.de>
    x86/mce: Mark mce_read_aux() noinstr

Borislav Petkov <bp@suse.de>
    x86/mce: Mark mce_end() noinstr

Borislav Petkov <bp@suse.de>
    x86/mce: Mark mce_panic() noinstr

Antoine Tenart <atenart@kernel.org>
    net-sysfs: update the queue counts in the unregistration path

Sebastian Gottschall <s.gottschall@dd-wrt.com>
    ath10k: Fix tx hanging

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: mvm: synchronize with FW after multicast commands

Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
    media: m920x: don't use stack on USB reads

Zhou Qingyang <zhou1615@umn.edu>
    media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()

James Hilliard <james.hilliard1@gmail.com>
    media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds.

Xiongwei Song <sxwjean@gmail.com>
    floppy: Add max size check for user space request

Neal Liu <neal_liu@aspeedtech.com>
    usb: uhci: add aspeed ast2600 uhci support

Zekun Shen <bruceshenzk@gmail.com>
    rsi: Fix out-of-bounds read in rsi_read_pkt()

Zekun Shen <bruceshenzk@gmail.com>
    mwifiex: Fix skb_over_panic in mwifiex_usb_recv()

Chengfeng Ye <cyeaa@connect.ust.hk>
    HSI: core: Fix return freed object in hsi_new_client

Hans de Goede <hdegoede@redhat.com>
    gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use

Martyn Welch <martyn.welch@collabora.com>
    drm/bridge: megachips: Ensure both bridges are probed before registration

Danielle Ratson <danieller@nvidia.com>
    mlxsw: pci: Add shutdown method in PCI driver

Lukas Bulwahn <lukas.bulwahn@gmail.com>
    ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART

Zheyu Ma <zheyuma97@gmail.com>
    media: b2c2: Add missing check in flexcop_pci_isr:

José Expósito <jose.exposito89@gmail.com>
    HID: apple: Do not reset quirks when the Fn key is not found

Pavankumar Kondeti <quic_pkondeti@quicinc.com>
    usb: gadget: f_fs: Use stream_open() for endpoint files

Ben Skeggs <bskeggs@redhat.com>
    drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR

Zekun Shen <bruceshenzk@gmail.com>
    ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply

Alexander Aring <aahringo@redhat.com>
    fs: dlm: filter user dlm messages for kernel locks

Wei Yongjun <weiyongjun1@huawei.com>
    Bluetooth: Fix debugfs entry leak in hci_register_dev()

Kamal Heib <kamalheib1@gmail.com>
    RDMA/cxgb4: Set queue pair state when being queried

Randy Dunlap <rdunlap@infradead.org>
    mips: bcm63xx: add support for clk_set_parent()

Randy Dunlap <rdunlap@infradead.org>
    mips: lantiq: add support for clk_set_parent()

Wei Yongjun <weiyongjun1@huawei.com>
    misc: lattice-ecp3-config: Fix task hung when firmware load failed

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    ASoC: samsung: idma: Check of ioremap return value

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    ASoC: mediatek: Check for error clk pointer

Xiongfeng Wang <wangxiongfeng2@huawei.com>
    iommu/iova: Fix race between FQ timeout and teardown

Arnd Bergmann <arnd@arndb.de>
    dmaengine: pxa/mmp: stop referencing config->slave_id

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    ASoC: rt5663: Handle device_property_read_u32_array error codes

Avihai Horon <avihaih@nvidia.com>
    RDMA/core: Let ib_find_gid() continue search even after empty entry

Bart Van Assche <bvanassche@acm.org>
    scsi: ufs: Fix race conditions related to driver data

Hector Martin <marcan@marcan.st>
    iommu/io-pgtable-arm: Fix table descriptor paddr formatting

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    uio: uio_dmem_genirq: Catch the Exception

Kees Cook <keescook@chromium.org>
    char/mwave: Adjust io port register size

Bixuan Cui <cuibixuan@linux.alibaba.com>
    ALSA: oss: fix compile error when OSS_DEBUG is enabled

Lukas Bulwahn <lukas.bulwahn@gmail.com>
    ASoC: uniphier: drop selecting non-existing SND_SOC_UNIPHIER_AIO_DMA

Peiwei Hu <jlu.hpw@foxmail.com>
    powerpc/prom_init: Fix improper check of prom_getprop()

Kamal Heib <kamalheib1@gmail.com>
    RDMA/hns: Validate the pkey index

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Add missing rwsem around snd_ctl_remove() calls

Takashi Iwai <tiwai@suse.de>
    ALSA: PCM: Add missing rwsem around snd_ctl_remove() calls

Takashi Iwai <tiwai@suse.de>
    ALSA: jack: Add missing rwsem around snd_ctl_remove() calls

Jan Kara <jack@suse.cz>
    ext4: avoid trim error on fs with small groups

Pavel Skripkin <paskripkin@gmail.com>
    net: mcs7830: handle usb read errors properly

Dominik Brodowski <linux@dominikbrodowski.net>
    pcmcia: fix setting of kthread task states

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    can: xilinx_can: xcan_probe(): check for error irq

Marc Kleine-Budde <mkl@pengutronix.de>
    can: softing: softing_startstop(): fix set but not used variable warning

Chen Jun <chenjun102@huawei.com>
    tpm: add request_locality before write TPM_INT_ENABLE

Miaoqian Lin <linmq006@gmail.com>
    spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    Bluetooth: hci_bcm: Check for error irq

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    fsl/fman: Check for null pointer after calling devm_ioremap

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    staging: greybus: audio: Check null pointer

Eric Dumazet <edumazet@google.com>
    ppp: ensure minimum packet size in ppp_write()

Xin Xiong <xiongx18@fudan.edu.cn>
    netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check()

Zhou Qingyang <zhou1615@umn.edu>
    pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in nonstatic_find_mem_region()

Zhou Qingyang <zhou1615@umn.edu>
    pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in __nonstatic_find_io_region()

Zhang Zixun <zhang133010@icloud.com>
    x86/mce/inject: Avoid out-of-bounds write when setting flags

Sergey Shtylyov <s.shtylyov@omp.ru>
    mmc: meson-mx-sdio: add IRQ check

Marek Behún <kabel@kernel.org>
    ARM: dts: armada-38x: Add generic compatible to UART nodes

Wei Yongjun <weiyongjun1@huawei.com>
    usb: ftdi-elan: fix memory leak on device disconnect

Antony Antony <antony.antony@secunet.com>
    xfrm: state and policy should fail if XFRMA_IF_ID 0

Antony Antony <antony.antony@secunet.com>
    xfrm: interface with if_id 0 should return error

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    drm/msm/dpu: fix safe status debugfs file

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    media: coda/imx-vdoa: Handle dma_set_coherent_mask error codes

Wang Hai <wanghai38@huawei.com>
    media: msi001: fix possible null-ptr-deref in msi001_probe()

Anton Vasilyev <vasilyev@ispras.ru>
    media: dw2102: Fix use after free

Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
    crypto: stm32/cryp - fix double pm exit

Eric Dumazet <edumazet@google.com>
    xfrm: fix a small bug in xfrm_sa_len()

Li Hua <hucool.lihua@huawei.com>
    sched/rt: Try to restart rt period timer when rt runtime exceeded

Robert Schlabbach <robert_s@gmx.net>
    media: si2157: Fix "warm" tuner state detection

Zhou Qingyang <zhou1615@umn.edu>
    media: saa7146: mxb: Fix a NULL pointer dereference in mxb_attach()

Zhou Qingyang <zhou1615@umn.edu>
    media: dib8000: Fix a memleak in dib8000_init()

Tasos Sahanidis <tasos@tasossah.com>
    floppy: Fix hang in watchdog when disk is ejected

Lino Sanfilippo <LinoSanfilippo@gmx.de>
    serial: amba-pl011: do not request memory region twice

Lizhi Hou <lizhi.hou@xilinx.com>
    tty: serial: uartlite: allow 64 bit address

Zhou Qingyang <zhou1615@umn.edu>
    drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()

Zhou Qingyang <zhou1615@umn.edu>
    drm/amdgpu: Fix a NULL pointer dereference in amdgpu_connector_lcd_native_mode()

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    arm64: dts: qcom: msm8916: fix MMC controller aliases

Florian Westphal <fw@strlen.de>
    netfilter: bridge: add support for pppoe filtering

Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
    media: mtk-vcodec: call v4l2_m2m_ctx_release first when file is released

Yang Yingliang <yangyingliang@huawei.com>
    media: si470x-i2c: fix possible memory leak in si470x_i2c_probe()

Suresh Udipi <sudipi@jp.adit-jv.com>
    media: rcar-csi2: Correct the selection of hsfreqrange

Tudor Ambarus <tudor.ambarus@microchip.com>
    tty: serial: atmel: Call dma_async_issue_pending()

Tudor Ambarus <tudor.ambarus@microchip.com>
    tty: serial: atmel: Check return code of dmaengine_submit()

Chengfeng Ye <cyeaa@connect.ust.hk>
    crypto: qce - fix uaf on qce_ahash_register_one

Wang Hai <wanghai38@huawei.com>
    media: dmxdev: fix UAF when dvb_register_device() fails

Jens Wiklander <jens.wiklander@linaro.org>
    tee: fix put order in teedev_close_context()

Pavel Skripkin <paskripkin@gmail.com>
    Bluetooth: stop proccessing malicious adv data

Christian Hewitt <christianshewitt@gmail.com>
    arm64: dts: meson-gxbb-wetek: fix missing GPIO binding

Dongliang Mu <mudongliangabcd@gmail.com>
    media: em28xx: fix memory leak in em28xx_init_dev

Dillon Min <dillon.minfei@gmail.com>
    media: videobuf2: Fix the size printk format

Bryan O'Donoghue <bryan.odonoghue@linaro.org>
    wcn36xx: Release DMA channel descriptor allocations

Bryan O'Donoghue <bryan.odonoghue@linaro.org>
    wcn36xx: Indicate beacon not connection loss on MISSED_BEACON_IND

Maxime Ripard <maxime@cerno.tech>
    clk: bcm-2835: Remove rounding up the dividers

Maxime Ripard <maxime@cerno.tech>
    clk: bcm-2835: Pick the closest clock rate

Wang Hai <wanghai38@huawei.com>
    Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() fails

Brian Norris <briannorris@chromium.org>
    drm/panel: innolux-p079zca: Delete panel on attach() failure

Gang Li <ligang.bdlg@bytedance.com>
    shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode

Yifeng Li <tomli@tomli.me>
    PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller

Christophe Leroy <christophe.leroy@csgroup.eu>
    lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()

Johan Hovold <johan@kernel.org>
    can: softing_cs: softingcs_probe(): fix memleak on registration failure

Johan Hovold <johan@kernel.org>
    media: stk1160: fix control-message timeouts

Johan Hovold <johan@kernel.org>
    media: pvrusb2: fix control-message timeouts

Johan Hovold <johan@kernel.org>
    media: redrat3: fix control-message timeouts

Michael Kuron <michael.kuron@gmail.com>
    media: dib0700: fix undefined behavior in tuner shutdown

Johan Hovold <johan@kernel.org>
    media: s2255: fix control-message timeouts

Johan Hovold <johan@kernel.org>
    media: cpia2: fix control-message timeouts

Johan Hovold <johan@kernel.org>
    media: em28xx: fix control-message timeouts

Johan Hovold <johan@kernel.org>
    media: mceusb: fix control-message timeouts

Johan Hovold <johan@kernel.org>
    media: flexcop-usb: fix control-message timeouts

Mateusz Jończyk <mat.jonczyk@o2.pl>
    rtc: cmos: take rtc_lock while reading from CMOS

Lucas De Marchi <lucas.demarchi@intel.com>
    x86/gpu: Reserve stolen memory for first integrated Intel GPU

Stefan Riedmueller <s.riedmueller@phytec.de>
    mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()

Chao Yu <chao@kernel.org>
    f2fs: fix to do sanity check in is_alive()

Jason Gerecke <killertofu@gmail.com>
    HID: wacom: Avoid using stale array indicies to read contact count

Jason Gerecke <killertofu@gmail.com>
    HID: wacom: Ignore the confidence flag when a touch is removed

Jason Gerecke <killertofu@gmail.com>
    HID: wacom: Reset expected and received contact counts at the same time

Jann Horn <jannh@google.com>
    HID: uhid: Fix worker destroying device without any protection

Christian Lachner <gladiac@gmail.com>
    ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows

Johan Hovold <johan@kernel.org>
    firmware: qemu_fw_cfg: fix kobject leak in probe error path

Johan Hovold <johan@kernel.org>
    firmware: qemu_fw_cfg: fix NULL-pointer deref on duplicate entries

Johan Hovold <johan@kernel.org>
    firmware: qemu_fw_cfg: fix sysfs information leak

Larry Finger <Larry.Finger@lwfinger.net>
    rtlwifi: rtl8192cu: Fix WARNING when calling local_irq_restore() with interrupts enabled

Johan Hovold <johan@kernel.org>
    media: uvcvideo: fix division by zero at stream start

Eric Farman <farman@linux.ibm.com>
    KVM: s390: Clarify SIGP orders versus STOP/RESTART

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    orangefs: Fix the size of a memory allocation in orangefs_bufmap_alloc()

Nathan Chancellor <nathan@kernel.org>
    kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test

Nathan Chancellor <nathan@kernel.org>
    drm/i915: Avoid bitwise vs logical OR warning in snb_wm_latency_quirk()

Nathan Chancellor <nathan@kernel.org>
    staging: wlan-ng: Avoid bitwise vs logical OR warning in hfa384x_usb_throttlefn()

Eric Biggers <ebiggers@google.com>
    random: fix data race on crng init time

Eric Biggers <ebiggers@google.com>
    random: fix data race on crng_node_pool

Brian Silverman <brian.silverman@bluerivertech.com>
    can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}

Marc Kleine-Budde <mkl@pengutronix.de>
    can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe()

Daniel Borkmann <daniel@iogearbox.net>
    veth: Do not record rx queue hint in veth_xmit

Thomas Gleixner <tglx@linutronix.de>
    can: bcm: switch timer to HRTIMER_MODE_SOFT and remove hrtimer_tasklet

Alan Stern <stern@rowland.harvard.edu>
    USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status

Alan Stern <stern@rowland.harvard.edu>
    USB: core: Fix bug in resuming hub's handling of wakeup requests

Johan Hovold <johan@kernel.org>
    Bluetooth: bfusb: fix division by zero in send path


-------------

Diffstat:

 Documentation/admin-guide/hw-vuln/spectre.rst      |   2 +-
 Makefile                                           |   6 +-
 arch/arm/Kconfig.debug                             |  14 +-
 arch/arm/boot/dts/armada-38x.dtsi                  |   4 +-
 arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi     |   4 +-
 arch/arm/include/debug/imx-uart.h                  |  18 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi  |   1 +
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |   2 +-
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |   4 +-
 arch/mips/bcm63xx/clk.c                            |   6 +
 arch/mips/cavium-octeon/octeon-platform.c          |   2 +
 arch/mips/cavium-octeon/octeon-usb.c               |   1 +
 arch/mips/include/asm/octeon/cvmx-bootinfo.h       |   4 +-
 arch/mips/lantiq/clk.c                             |   6 +
 arch/mips/mm/gup.c                                 |   9 +-
 arch/parisc/kernel/traps.c                         |   2 +-
 arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi      |   2 +
 arch/powerpc/kernel/btext.c                        |   4 +-
 arch/powerpc/kernel/prom_init.c                    |   2 +-
 arch/powerpc/kernel/smp.c                          |  32 ++
 arch/powerpc/kernel/watchdog.c                     |  41 ++-
 arch/powerpc/platforms/cell/iommu.c                |   1 +
 arch/powerpc/platforms/cell/pervasive.c            |   1 +
 arch/powerpc/platforms/embedded6xx/hlwd-pic.c      |   1 +
 arch/powerpc/platforms/powernv/opal-lpc.c          |   1 +
 arch/s390/kvm/interrupt.c                          |   7 +
 arch/s390/kvm/kvm-s390.c                           |   9 +-
 arch/s390/kvm/kvm-s390.h                           |   1 +
 arch/s390/kvm/sigp.c                               |  28 ++
 arch/s390/mm/gup.c                                 |   9 +-
 arch/s390/mm/pgalloc.c                             |   4 +-
 arch/sh/mm/gup.c                                   |   9 +-
 arch/sparc/mm/gup.c                                |   9 +-
 arch/um/include/shared/registers.h                 |   4 +-
 arch/um/os-Linux/registers.c                       |   4 +-
 arch/um/os-Linux/start_up.c                        |   2 +-
 arch/x86/kernel/cpu/mcheck/mce-inject.c            |   2 +-
 arch/x86/kernel/cpu/mcheck/mce.c                   |  31 +-
 arch/x86/kernel/early-quirks.c                     |  10 +-
 arch/x86/um/syscalls_64.c                          |   3 +-
 drivers/acpi/acpica/exoparg1.c                     |   3 +-
 drivers/acpi/acpica/hwesleep.c                     |   4 +-
 drivers/acpi/acpica/hwsleep.c                      |   4 +-
 drivers/acpi/acpica/hwxfsleep.c                    |   2 -
 drivers/acpi/acpica/utdelete.c                     |   1 +
 drivers/acpi/battery.c                             |  22 ++
 drivers/block/floppy.c                             |   6 +-
 drivers/bluetooth/bfusb.c                          |   3 +
 drivers/bluetooth/hci_bcm.c                        |   7 +-
 drivers/char/mwave/3780i.h                         |   2 +-
 drivers/char/random.c                              |  61 ++--
 drivers/char/tpm/tpm_tis_core.c                    |   8 +
 drivers/clk/bcm/clk-bcm2835.c                      |  13 +-
 drivers/crypto/qce/sha.c                           |   2 +-
 drivers/crypto/stm32/stm32-cryp.c                  |   2 -
 drivers/crypto/stm32/stm32_crc32.c                 |   4 +-
 drivers/dma/at_xdmac.c                             |  32 +-
 drivers/dma/mmp_pdma.c                             |   6 -
 drivers/dma/pxa_dma.c                              |   7 -
 drivers/dma/stm32-mdma.c                           |   2 +-
 drivers/firmware/google/Kconfig                    |   6 +-
 drivers/firmware/qemu_fw_cfg.c                     |  20 +-
 drivers/gpio/gpiolib-acpi.c                        |  15 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c     |   6 +
 drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c              |  13 +-
 .../drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c   |  40 ++-
 drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c       |   6 +
 drivers/gpu/drm/i915/intel_pm.c                    |   6 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   4 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c     |  37 ++-
 drivers/gpu/drm/panel/panel-innolux-p079zca.c      |  10 +-
 drivers/gpu/drm/radeon/radeon_kms.c                |  42 +--
 drivers/hid/hid-apple.c                            |   2 +-
 drivers/hid/hid-input.c                            |   6 +
 drivers/hid/uhid.c                                 |  29 +-
 drivers/hid/wacom_wac.c                            |  39 ++-
 drivers/hsi/hsi_core.c                             |   1 +
 drivers/i2c/busses/i2c-designware-pcidrv.c         |   8 +-
 drivers/i2c/busses/i2c-i801.c                      |  15 +-
 drivers/i2c/busses/i2c-mpc.c                       |  23 +-
 drivers/infiniband/core/device.c                   |   3 +-
 drivers/infiniband/hw/cxgb4/qp.c                   |   1 +
 drivers/infiniband/hw/hns/hns_roce_main.c          |   5 +-
 drivers/infiniband/sw/rxe/rxe_opcode.c             |   2 +-
 drivers/iommu/io-pgtable-arm.c                     |   9 +-
 drivers/iommu/iova.c                               |   3 +-
 drivers/md/persistent-data/dm-btree.c              |   8 +-
 drivers/md/persistent-data/dm-space-map-common.c   |   5 +
 drivers/media/common/saa7146/saa7146_fops.c        |   2 +-
 .../media/common/videobuf2/videobuf2-dma-contig.c  |   8 +-
 drivers/media/dvb-core/dmxdev.c                    |  18 +-
 drivers/media/dvb-frontends/dib8000.c              |   4 +-
 drivers/media/pci/b2c2/flexcop-pci.c               |   3 +
 drivers/media/pci/saa7146/hexium_gemini.c          |   7 +-
 drivers/media/pci/saa7146/hexium_orion.c           |   8 +-
 drivers/media/pci/saa7146/mxb.c                    |   8 +-
 drivers/media/platform/coda/imx-vdoa.c             |   6 +-
 .../media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c |   2 +-
 drivers/media/platform/rcar-vin/rcar-csi2.c        |  18 +-
 drivers/media/radio/si470x/radio-si470x-i2c.c      |   3 +-
 drivers/media/rc/igorplugusb.c                     |   4 +-
 drivers/media/rc/mceusb.c                          |   8 +-
 drivers/media/rc/redrat3.c                         |  22 +-
 drivers/media/tuners/msi001.c                      |   7 +
 drivers/media/tuners/si2157.c                      |   2 +-
 drivers/media/usb/b2c2/flexcop-usb.c               |  10 +-
 drivers/media/usb/b2c2/flexcop-usb.h               |  12 +-
 drivers/media/usb/cpia2/cpia2_usb.c                |   4 +-
 drivers/media/usb/dvb-usb/dib0700_core.c           |   2 -
 drivers/media/usb/dvb-usb/dw2102.c                 | 338 +++++++++++++--------
 drivers/media/usb/dvb-usb/m920x.c                  |  12 +-
 drivers/media/usb/em28xx/em28xx-cards.c            |  18 +-
 drivers/media/usb/em28xx/em28xx-core.c             |   4 +-
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c            |   8 +-
 drivers/media/usb/s2255/s2255drv.c                 |   4 +-
 drivers/media/usb/stk1160/stk1160-core.c           |   4 +-
 drivers/media/usb/uvc/uvc_video.c                  |   4 +
 drivers/media/usb/uvc/uvcvideo.h                   |   2 +-
 drivers/mfd/intel-lpss-acpi.c                      |   7 +-
 drivers/misc/lattice-ecp3-config.c                 |  12 +-
 drivers/misc/lkdtm/Makefile                        |   2 +-
 drivers/mmc/core/sdio.c                            |   4 +-
 drivers/mmc/host/meson-mx-sdio.c                   |   5 +
 drivers/mtd/nand/bbt.c                             |   2 +-
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c         |   9 -
 drivers/net/bonding/bond_main.c                    |   6 +-
 drivers/net/can/softing/softing_cs.c               |   2 +-
 drivers/net/can/softing/softing_fw.c               |  11 +-
 drivers/net/can/usb/gs_usb.c                       |   5 +-
 drivers/net/can/xilinx_can.c                       |   7 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |  10 +-
 drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c  |   3 +-
 drivers/net/ethernet/cortina/gemini.c              |   9 +-
 drivers/net/ethernet/freescale/fman/mac.c          |  21 +-
 drivers/net/ethernet/freescale/xgmac_mdio.c        |   3 +-
 drivers/net/ethernet/i825xx/sni_82596.c            |   3 +-
 drivers/net/ethernet/mellanox/mlxsw/pci.c          |   1 +
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c  |  14 +-
 drivers/net/phy/marvell.c                          |   6 +
 drivers/net/phy/mdio_bus.c                         |   2 +-
 drivers/net/ppp/ppp_generic.c                      |   7 +-
 drivers/net/usb/mcs7830.c                          |  12 +-
 drivers/net/veth.c                                 |   1 -
 drivers/net/wireless/ath/ar5523/ar5523.c           |   4 +
 drivers/net/wireless/ath/ath10k/htt_tx.c           |   3 +
 drivers/net/wireless/ath/ath10k/txrx.c             |   2 -
 drivers/net/wireless/ath/ath9k/hif_usb.c           |   7 +
 drivers/net/wireless/ath/wcn36xx/dxe.c             |   5 +
 drivers/net/wireless/ath/wcn36xx/smd.c             |   4 +-
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c       |  17 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  |  17 ++
 drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c      |  27 ++
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c      |   2 +-
 drivers/net/wireless/marvell/mwifiex/usb.c         |   3 +-
 .../net/wireless/realtek/rtlwifi/rtl8192cu/hw.c    |   1 +
 drivers/net/wireless/rsi/rsi_91x_main.c            |   4 +
 drivers/net/wireless/rsi/rsi_91x_usb.c             |   1 -
 drivers/net/wireless/rsi/rsi_usb.h                 |   2 +
 drivers/parisc/pdc_stable.c                        |   4 +-
 drivers/pci/quirks.c                               |   3 +
 drivers/pcmcia/cs.c                                |   8 +-
 drivers/pcmcia/rsrc_nonstatic.c                    |   6 +
 drivers/power/supply/bq25890_charger.c             |   4 +-
 drivers/regulator/core.c                           |   4 +-
 drivers/regulator/qcom_smd-regulator.c             | 100 ++++--
 drivers/rpmsg/rpmsg_core.c                         |  20 +-
 drivers/rtc/rtc-cmos.c                             |   3 +
 drivers/rtc/rtc-pxa.c                              |   4 +
 drivers/scsi/sr.c                                  |   2 +-
 drivers/scsi/sr_vendor.c                           |   4 +-
 drivers/scsi/ufs/tc-dwc-g210-pci.c                 |   1 -
 drivers/scsi/ufs/ufshcd-pltfrm.c                   |   2 -
 drivers/scsi/ufs/ufshcd.c                          |   7 +
 drivers/soc/mediatek/mtk-scpsys.c                  |  15 +-
 drivers/spi/spi-meson-spifc.c                      |   1 +
 drivers/staging/greybus/audio_topology.c           |  15 +
 drivers/staging/wlan-ng/hfa384x_usb.c              |  22 +-
 drivers/tee/tee_core.c                             |   4 +-
 drivers/tty/serial/amba-pl010.c                    |   3 -
 drivers/tty/serial/amba-pl011.c                    |  27 +-
 drivers/tty/serial/atmel_serial.c                  |  14 +
 drivers/tty/serial/serial_core.c                   |   7 +-
 drivers/tty/serial/uartlite.c                      |   2 +-
 drivers/uio/uio_dmem_genirq.c                      |   6 +-
 drivers/usb/core/hcd.c                             |   9 +-
 drivers/usb/core/hub.c                             |   7 +-
 drivers/usb/gadget/function/f_fs.c                 |   4 +-
 drivers/usb/host/uhci-platform.c                   |   3 +-
 drivers/usb/misc/ftdi-elan.c                       |   1 +
 drivers/w1/slaves/w1_ds28e04.c                     |  26 +-
 fs/btrfs/backref.c                                 |  21 +-
 fs/dlm/lock.c                                      |   9 +
 fs/ext4/ioctl.c                                    |   2 -
 fs/ext4/mballoc.c                                  |   8 +
 fs/ext4/migrate.c                                  |  23 +-
 fs/ext4/super.c                                    |  25 +-
 fs/f2fs/gc.c                                       |   3 +
 fs/fuse/acl.c                                      |   6 +
 fs/fuse/dir.c                                      |  40 ++-
 fs/fuse/file.c                                     |  27 +-
 fs/fuse/fuse_i.h                                   |  13 +
 fs/fuse/inode.c                                    |   2 +-
 fs/fuse/xattr.c                                    |   9 +
 fs/jffs2/file.c                                    |  40 ++-
 fs/orangefs/orangefs-bufmap.c                      |   7 +-
 fs/ubifs/super.c                                   |   1 -
 include/acpi/actypes.h                             |  10 +-
 include/linux/hid.h                                |   2 +
 include/net/sch_generic.h                          |   5 +
 include/sound/soc.h                                |   2 +
 kernel/audit.c                                     |  18 +-
 kernel/sched/cputime.c                             |   4 +-
 kernel/sched/rt.c                                  |  23 +-
 mm/shmem.c                                         |  37 ++-
 net/bluetooth/cmtp/core.c                          |   4 +-
 net/bluetooth/hci_core.c                           |   1 +
 net/bluetooth/hci_event.c                          |   8 +-
 net/bridge/br_netfilter_hooks.c                    |   7 +-
 net/can/bcm.c                                      | 156 ++++------
 net/core/filter.c                                  |   6 +-
 net/core/net-sysfs.c                               |   3 +
 net/core/net_namespace.c                           |   4 +-
 net/ipv4/netfilter/ipt_CLUSTERIP.c                 |   5 +-
 net/mac80211/rx.c                                  |   2 +-
 net/nfc/llcp_sock.c                                |   5 +
 net/sched/sch_generic.c                            |   1 +
 net/unix/garbage.c                                 |  14 +-
 net/unix/scm.c                                     |   6 +-
 net/xfrm/xfrm_interface.c                          |  14 +-
 net/xfrm/xfrm_user.c                               |  23 +-
 scripts/dtc/dtx_diff                               |   8 +-
 sound/core/jack.c                                  |   3 +
 sound/core/oss/pcm_oss.c                           |   2 +-
 sound/core/pcm.c                                   |   6 +-
 sound/core/seq/seq_queue.c                         |  14 +-
 sound/pci/hda/hda_codec.c                          |   3 +
 sound/pci/hda/patch_realtek.c                      |  30 +-
 sound/soc/codecs/rt5663.c                          |  12 +-
 sound/soc/mediatek/mt8173/mt8173-max98090.c        |   3 +
 sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c   |   2 +
 sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c   |   2 +
 sound/soc/mediatek/mt8173/mt8173-rt5650.c          |   2 +
 sound/soc/samsung/idma.c                           |   2 +
 sound/soc/soc-core.c                               |   1 +
 sound/soc/soc-pcm.c                                |  40 ++-
 sound/soc/uniphier/Kconfig                         |   2 -
 246 files changed, 1866 insertions(+), 872 deletions(-)

[PATCH 4.19 001/239] Bluetooth: bfusb: fix division by zero in send path

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit b5e6fa7a12572c82f1e7f2f51fbb02a322291291 upstream.

Add the missing bulk-out endpoint sanity check to probe() to avoid
division by zero in bfusb_send_frame() in case a malicious device has
broken descriptors (or when doing descriptor fuzz testing).

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/bfusb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -644,6 +644,9 @@ static int bfusb_probe(struct usb_interf
 	data->bulk_out_ep   = bulk_out_ep->desc.bEndpointAddress;
 	data->bulk_pkt_size = le16_to_cpu(bulk_out_ep->desc.wMaxPacketSize);
 
+	if (!data->bulk_pkt_size)
+		goto done;
+
 	rwlock_init(&data->lock);
 
 	data->reassembly = NULL;

[PATCH 4.19 002/239] USB: core: Fix bug in resuming hubs handling of wakeup requests

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 0f663729bb4afc92a9986b66131ebd5b8a9254d1 upstream.

Bugzilla #213839 reports a 7-port hub that doesn't work properly when
devices are plugged into some of the ports; the kernel goes into an
unending disconnect/reinitialize loop as shown in the bug report.

This "7-port hub" comprises two four-port hubs with one plugged into
the other; the failures occur when a device is plugged into one of the
downstream hub's ports.  (These hubs have other problems too.  For
example, they bill themselves as USB-2.0 compliant but they only run
at full speed.)

It turns out that the failures are caused by bugs in both the kernel
and the hub.  The hub's bug is that it reports a different
bmAttributes value in its configuration descriptor following a remote
wakeup (0xe0 before, 0xc0 after -- the wakeup-support bit has
changed).

The kernel's bug is inside the hub driver's resume handler.  When
hub_activate() sees that one of the hub's downstream ports got a
wakeup request from a child device, it notes this fact by setting the
corresponding bit in the hub->change_bits variable.  But this variable
is meant for connection changes, not wakeup events; setting it causes
the driver to believe the downstream port has been disconnected and
then connected again (in addition to having received a wakeup
request).

Because of this, the hub driver then tries to check whether the device
currently plugged into the downstream port is the same as the device
that had been attached there before.  Normally this check succeeds and
wakeup handling continues with no harm done (which is why the bug
remained undetected until now).  But with these dodgy hubs, the check
fails because the config descriptor has changed.  This causes the hub
driver to reinitialize the child device, leading to the
disconnect/reinitialize loop described in the bug report.

The proper way to note reception of a downstream wakeup request is
to set a bit in the hub->event_bits variable instead of
hub->change_bits.  That way the hub driver will realize that something
has happened to the port but will not think the port and child device
have been disconnected.  This patch makes that change.

Cc: <stable@vger.kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YdCw7nSfWYPKWQoD@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hub.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1197,7 +1197,7 @@ static void hub_activate(struct usb_hub
 			 */
 			if (portchange || (hub_is_superspeed(hub->hdev) &&
 						port_resumed))
-				set_bit(port1, hub->change_bits);
+				set_bit(port1, hub->event_bits);
 
 		} else if (udev->persist_enabled) {
 #ifdef CONFIG_PM

[PATCH 4.19 003/239] USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 1d7d4c07932e04355d6e6528d44a2f2c9e354346 upstream.

When the USB core code for getting root-hub status reports was
originally written, it was assumed that the hub driver would be its
only caller.  But this isn't true now; user programs can use usbfs to
communicate with root hubs and get status reports.  When they do this,
they may use a transfer_buffer that is smaller than the data returned
by the HCD, which will lead to a buffer overflow error when
usb_hcd_poll_rh_status() tries to store the status data.  This was
discovered by syzbot:

BUG: KASAN: slab-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline]
BUG: KASAN: slab-out-of-bounds in usb_hcd_poll_rh_status+0x5f4/0x780 drivers/usb/core/hcd.c:776
Write of size 2 at addr ffff88801da403c0 by task syz-executor133/4062

This patch fixes the bug by reducing the amount of status data if it
won't fit in the transfer_buffer.  If some data gets discarded then
the URB's completion status is set to -EOVERFLOW rather than 0, to let
the user know what happened.

Reported-and-tested-by: syzbot+3ae6a2b06f131ab9849f@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Yc+3UIQJ2STbxNua@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hcd.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -750,6 +750,7 @@ void usb_hcd_poll_rh_status(struct usb_h
 {
 	struct urb	*urb;
 	int		length;
+	int		status;
 	unsigned long	flags;
 	char		buffer[6];	/* Any root hubs with > 31 ports? */
 
@@ -767,11 +768,17 @@ void usb_hcd_poll_rh_status(struct usb_h
 		if (urb) {
 			clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
 			hcd->status_urb = NULL;
+			if (urb->transfer_buffer_length >= length) {
+				status = 0;
+			} else {
+				status = -EOVERFLOW;
+				length = urb->transfer_buffer_length;
+			}
 			urb->actual_length = length;
 			memcpy(urb->transfer_buffer, buffer, length);
 
 			usb_hcd_unlink_urb_from_ep(hcd, urb);
-			usb_hcd_giveback_urb(hcd, urb, 0);
+			usb_hcd_giveback_urb(hcd, urb, status);
 		} else {
 			length = 0;
 			set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);

[PATCH 4.19 004/239] can: bcm: switch timer to HRTIMER_MODE_SOFT and remove hrtimer_tasklet

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

commit bf74aa86e111aa3b2fbb25db37e3a3fab71b5b68 upstream.

This patch switches the timer to HRTIMER_MODE_SOFT, which executed the
timer callback in softirq context and removes the hrtimer_tasklet.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/bcm.c |  156 +++++++++++++++++++---------------------------------------
 1 file changed, 52 insertions(+), 104 deletions(-)

--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -105,7 +105,6 @@ struct bcm_op {
 	unsigned long frames_abs, frames_filtered;
 	struct bcm_timeval ival1, ival2;
 	struct hrtimer timer, thrtimer;
-	struct tasklet_struct tsklet, thrtsklet;
 	ktime_t rx_stamp, kt_ival1, kt_ival2, kt_lastmsg;
 	int rx_ifindex;
 	int cfsiz;
@@ -374,25 +373,34 @@ static void bcm_send_to_user(struct bcm_
 	}
 }
 
-static void bcm_tx_start_timer(struct bcm_op *op)
+static bool bcm_tx_set_expiry(struct bcm_op *op, struct hrtimer *hrt)
 {
+	ktime_t ival;
+
 	if (op->kt_ival1 && op->count)
-		hrtimer_start(&op->timer,
-			      ktime_add(ktime_get(), op->kt_ival1),
-			      HRTIMER_MODE_ABS);
+		ival = op->kt_ival1;
 	else if (op->kt_ival2)
-		hrtimer_start(&op->timer,
-			      ktime_add(ktime_get(), op->kt_ival2),
-			      HRTIMER_MODE_ABS);
+		ival = op->kt_ival2;
+	else
+		return false;
+
+	hrtimer_set_expires(hrt, ktime_add(ktime_get(), ival));
+	return true;
 }
 
-static void bcm_tx_timeout_tsklet(unsigned long data)
+static void bcm_tx_start_timer(struct bcm_op *op)
 {
-	struct bcm_op *op = (struct bcm_op *)data;
+	if (bcm_tx_set_expiry(op, &op->timer))
+		hrtimer_start_expires(&op->timer, HRTIMER_MODE_ABS_SOFT);
+}
+
+/* bcm_tx_timeout_handler - performs cyclic CAN frame transmissions */
+static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
+{
+	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
 	struct bcm_msg_head msg_head;
 
 	if (op->kt_ival1 && (op->count > 0)) {
-
 		op->count--;
 		if (!op->count && (op->flags & TX_COUNTEVT)) {
 
@@ -410,22 +418,12 @@ static void bcm_tx_timeout_tsklet(unsign
 		}
 		bcm_can_tx(op);
 
-	} else if (op->kt_ival2)
+	} else if (op->kt_ival2) {
 		bcm_can_tx(op);
+	}
 
-	bcm_tx_start_timer(op);
-}
-
-/*
- * bcm_tx_timeout_handler - performs cyclic CAN frame transmissions
- */
-static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
-{
-	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
-
-	tasklet_schedule(&op->tsklet);
-
-	return HRTIMER_NORESTART;
+	return bcm_tx_set_expiry(op, &op->timer) ?
+		HRTIMER_RESTART : HRTIMER_NORESTART;
 }
 
 /*
@@ -492,7 +490,7 @@ static void bcm_rx_update_and_send(struc
 		/* do not send the saved data - only start throttle timer */
 		hrtimer_start(&op->thrtimer,
 			      ktime_add(op->kt_lastmsg, op->kt_ival2),
-			      HRTIMER_MODE_ABS);
+			      HRTIMER_MODE_ABS_SOFT);
 		return;
 	}
 
@@ -551,14 +549,21 @@ static void bcm_rx_starttimer(struct bcm
 		return;
 
 	if (op->kt_ival1)
-		hrtimer_start(&op->timer, op->kt_ival1, HRTIMER_MODE_REL);
+		hrtimer_start(&op->timer, op->kt_ival1, HRTIMER_MODE_REL_SOFT);
 }
 
-static void bcm_rx_timeout_tsklet(unsigned long data)
+/* bcm_rx_timeout_handler - when the (cyclic) CAN frame reception timed out */
+static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer)
 {
-	struct bcm_op *op = (struct bcm_op *)data;
+	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
 	struct bcm_msg_head msg_head;
 
+	/* if user wants to be informed, when cyclic CAN-Messages come back */
+	if ((op->flags & RX_ANNOUNCE_RESUME) && op->last_frames) {
+		/* clear received CAN frames to indicate 'nothing received' */
+		memset(op->last_frames, 0, op->nframes * op->cfsiz);
+	}
+
 	/* create notification to user */
 	memset(&msg_head, 0, sizeof(msg_head));
 	msg_head.opcode  = RX_TIMEOUT;
@@ -570,25 +575,6 @@ static void bcm_rx_timeout_tsklet(unsign
 	msg_head.nframes = 0;
 
 	bcm_send_to_user(op, &msg_head, NULL, 0);
-}
-
-/*
- * bcm_rx_timeout_handler - when the (cyclic) CAN frame reception timed out
- */
-static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer)
-{
-	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
-
-	/* schedule before NET_RX_SOFTIRQ */
-	tasklet_hi_schedule(&op->tsklet);
-
-	/* no restart of the timer is done here! */
-
-	/* if user wants to be informed, when cyclic CAN-Messages come back */
-	if ((op->flags & RX_ANNOUNCE_RESUME) && op->last_frames) {
-		/* clear received CAN frames to indicate 'nothing received' */
-		memset(op->last_frames, 0, op->nframes * op->cfsiz);
-	}
 
 	return HRTIMER_NORESTART;
 }
@@ -596,14 +582,12 @@ static enum hrtimer_restart bcm_rx_timeo
 /*
  * bcm_rx_do_flush - helper for bcm_rx_thr_flush
  */
-static inline int bcm_rx_do_flush(struct bcm_op *op, int update,
-				  unsigned int index)
+static inline int bcm_rx_do_flush(struct bcm_op *op, unsigned int index)
 {
 	struct canfd_frame *lcf = op->last_frames + op->cfsiz * index;
 
 	if ((op->last_frames) && (lcf->flags & RX_THR)) {
-		if (update)
-			bcm_rx_changed(op, lcf);
+		bcm_rx_changed(op, lcf);
 		return 1;
 	}
 	return 0;
@@ -611,11 +595,8 @@ static inline int bcm_rx_do_flush(struct
 
 /*
  * bcm_rx_thr_flush - Check for throttled data and send it to the userspace
- *
- * update == 0 : just check if throttled data is available  (any irq context)
- * update == 1 : check and send throttled data to userspace (soft_irq context)
  */
-static int bcm_rx_thr_flush(struct bcm_op *op, int update)
+static int bcm_rx_thr_flush(struct bcm_op *op)
 {
 	int updated = 0;
 
@@ -624,24 +605,16 @@ static int bcm_rx_thr_flush(struct bcm_o
 
 		/* for MUX filter we start at index 1 */
 		for (i = 1; i < op->nframes; i++)
-			updated += bcm_rx_do_flush(op, update, i);
+			updated += bcm_rx_do_flush(op, i);
 
 	} else {
 		/* for RX_FILTER_ID and simple filter */
-		updated += bcm_rx_do_flush(op, update, 0);
+		updated += bcm_rx_do_flush(op, 0);
 	}
 
 	return updated;
 }
 
-static void bcm_rx_thr_tsklet(unsigned long data)
-{
-	struct bcm_op *op = (struct bcm_op *)data;
-
-	/* push the changed data to the userspace */
-	bcm_rx_thr_flush(op, 1);
-}
-
 /*
  * bcm_rx_thr_handler - the time for blocked content updates is over now:
  *                      Check for throttled data and send it to the userspace
@@ -650,9 +623,7 @@ static enum hrtimer_restart bcm_rx_thr_h
 {
 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, thrtimer);
 
-	tasklet_schedule(&op->thrtsklet);
-
-	if (bcm_rx_thr_flush(op, 0)) {
+	if (bcm_rx_thr_flush(op)) {
 		hrtimer_forward(hrtimer, ktime_get(), op->kt_ival2);
 		return HRTIMER_RESTART;
 	} else {
@@ -748,23 +719,8 @@ static struct bcm_op *bcm_find_op(struct
 
 static void bcm_remove_op(struct bcm_op *op)
 {
-	if (op->tsklet.func) {
-		while (test_bit(TASKLET_STATE_SCHED, &op->tsklet.state) ||
-		       test_bit(TASKLET_STATE_RUN, &op->tsklet.state) ||
-		       hrtimer_active(&op->timer)) {
-			hrtimer_cancel(&op->timer);
-			tasklet_kill(&op->tsklet);
-		}
-	}
-
-	if (op->thrtsklet.func) {
-		while (test_bit(TASKLET_STATE_SCHED, &op->thrtsklet.state) ||
-		       test_bit(TASKLET_STATE_RUN, &op->thrtsklet.state) ||
-		       hrtimer_active(&op->thrtimer)) {
-			hrtimer_cancel(&op->thrtimer);
-			tasklet_kill(&op->thrtsklet);
-		}
-	}
+	hrtimer_cancel(&op->timer);
+	hrtimer_cancel(&op->thrtimer);
 
 	if ((op->frames) && (op->frames != &op->sframe))
 		kfree(op->frames);
@@ -998,15 +954,13 @@ static int bcm_tx_setup(struct bcm_msg_h
 		op->ifindex = ifindex;
 
 		/* initialize uninitialized (kzalloc) structure */
-		hrtimer_init(&op->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		hrtimer_init(&op->timer, CLOCK_MONOTONIC,
+			     HRTIMER_MODE_REL_SOFT);
 		op->timer.function = bcm_tx_timeout_handler;
 
-		/* initialize tasklet for tx countevent notification */
-		tasklet_init(&op->tsklet, bcm_tx_timeout_tsklet,
-			     (unsigned long) op);
-
 		/* currently unused in tx_ops */
-		hrtimer_init(&op->thrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		hrtimer_init(&op->thrtimer, CLOCK_MONOTONIC,
+			     HRTIMER_MODE_REL_SOFT);
 
 		/* add this bcm_op to the list of the tx_ops */
 		list_add(&op->list, &bo->tx_ops);
@@ -1175,20 +1129,14 @@ static int bcm_rx_setup(struct bcm_msg_h
 		op->rx_ifindex = ifindex;
 
 		/* initialize uninitialized (kzalloc) structure */
-		hrtimer_init(&op->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		hrtimer_init(&op->timer, CLOCK_MONOTONIC,
+			     HRTIMER_MODE_REL_SOFT);
 		op->timer.function = bcm_rx_timeout_handler;
 
-		/* initialize tasklet for rx timeout notification */
-		tasklet_init(&op->tsklet, bcm_rx_timeout_tsklet,
-			     (unsigned long) op);
-
-		hrtimer_init(&op->thrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		hrtimer_init(&op->thrtimer, CLOCK_MONOTONIC,
+			     HRTIMER_MODE_REL_SOFT);
 		op->thrtimer.function = bcm_rx_thr_handler;
 
-		/* initialize tasklet for rx throttle handling */
-		tasklet_init(&op->thrtsklet, bcm_rx_thr_tsklet,
-			     (unsigned long) op);
-
 		/* add this bcm_op to the list of the rx_ops */
 		list_add(&op->list, &bo->rx_ops);
 
@@ -1234,12 +1182,12 @@ static int bcm_rx_setup(struct bcm_msg_h
 			 */
 			op->kt_lastmsg = 0;
 			hrtimer_cancel(&op->thrtimer);
-			bcm_rx_thr_flush(op, 1);
+			bcm_rx_thr_flush(op);
 		}
 
 		if ((op->flags & STARTTIMER) && op->kt_ival1)
 			hrtimer_start(&op->timer, op->kt_ival1,
-				      HRTIMER_MODE_REL);
+				      HRTIMER_MODE_REL_SOFT);
 	}
 
 	/* now we can register for can_ids, if we added a new bcm_op */

[PATCH 4.19 005/239] veth: Do not record rx queue hint in veth_xmit

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit 710ad98c363a66a0cd8526465426c5c5f8377ee0 upstream.

Laurent reported that they have seen a significant amount of TCP retransmissions
at high throughput from applications residing in network namespaces talking to
the outside world via veths. The drops were seen on the qdisc layer (fq_codel,
as per systemd default) of the phys device such as ena or virtio_net due to all
traffic hitting a _single_ TX queue _despite_ multi-queue device. (Note that the
setup was _not_ using XDP on veths as the issue is generic.)

More specifically, after edbea9220251 ("veth: Store queue_mapping independently
of XDP prog presence") which made it all the way back to v4.19.184+,
skb_record_rx_queue() would set skb->queue_mapping to 1 (given 1 RX and 1 TX
queue by default for veths) instead of leaving at 0.

This is eventually retained and callbacks like ena_select_queue() will also pick
single queue via netdev_core_pick_tx()'s ndo_select_queue() once all the traffic
is forwarded to that device via upper stack or other means. Similarly, for others
not implementing ndo_select_queue() if XPS is disabled, netdev_pick_tx() might
call into the skb_tx_hash() and check for prior skb_rx_queue_recorded() as well.

In general, it is a _bad_ idea for virtual devices like veth to mess around with
queue selection [by default]. Given dev->real_num_tx_queues is by default 1,
the skb->queue_mapping was left untouched, and so prior to edbea9220251 the
netdev_core_pick_tx() could do its job upon __dev_queue_xmit() on the phys device.

Unbreak this and restore prior behavior by removing the skb_record_rx_queue()
from veth_xmit() altogether.

If the veth peer has an XDP program attached, then it would return the first RX
queue index in xdp_md->rx_queue_index (unless configured in non-default manner).
However, this is still better than breaking the generic case.

Fixes: edbea9220251 ("veth: Store queue_mapping independently of XDP prog presence")
Fixes: 638264dc9022 ("veth: Support per queue XDP ring")
Reported-by: Laurent Bernaille <laurent.bernaille@datadoghq.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Toshiaki Makita <toshiaki.makita1@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/veth.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -197,7 +197,6 @@ static netdev_tx_t veth_xmit(struct sk_b
 	if (rxq < rcv->real_num_rx_queues) {
 		rq = &rcv_priv->rq[rxq];
 		rcv_xdp = rcu_access_pointer(rq->xdp_prog);
-		skb_record_rx_queue(skb, rxq);
 	}
 
 	if (likely(veth_forward_skb(rcv, skb, rq, rcv_xdp) == NET_RX_SUCCESS)) {

[PATCH 4.19 006/239] mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe()

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit c9e143084d1a602f829115612e1ec79df3727c8b upstream.

The runtime PM callback may be called as soon as the runtime PM facility
is enabled and activated. It means that ->suspend() may be called before
we finish probing the device in the ACPI case. Hence, NULL pointer
dereference:

  intel-lpss INT34BA:00: IRQ index 0 not found
  BUG: kernel NULL pointer dereference, address: 0000000000000030
  ...
  Workqueue: pm pm_runtime_work
  RIP: 0010:intel_lpss_suspend+0xb/0x40 [intel_lpss]

To fix this, first try to register the device and only after that enable
runtime PM facility.

Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
Reported-by: Orlando Chamberlain <redecorating@protonmail.com>
Reported-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211101190008.86473-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mfd/intel-lpss-acpi.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/mfd/intel-lpss-acpi.c
+++ b/drivers/mfd/intel-lpss-acpi.c
@@ -80,6 +80,7 @@ static int intel_lpss_acpi_probe(struct
 {
 	struct intel_lpss_platform_info *info;
 	const struct acpi_device_id *id;
+	int ret;
 
 	id = acpi_match_device(intel_lpss_acpi_ids, &pdev->dev);
 	if (!id)
@@ -93,10 +94,14 @@ static int intel_lpss_acpi_probe(struct
 	info->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	info->irq = platform_get_irq(pdev, 0);
 
+	ret = intel_lpss_probe(&pdev->dev, info);
+	if (ret)
+		return ret;
+
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
-	return intel_lpss_probe(&pdev->dev, info);
+	return 0;
 }
 
 static int intel_lpss_acpi_remove(struct platform_device *pdev)

[PATCH 4.19 007/239] can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

commit 4a8737ff068724f509d583fef404d349adba80d6 upstream.

The received data contains the channel the received data is associated
with. If the channel number is bigger than the actual number of
channels assume broken or malicious USB device and shut it down.

This fixes the error found by clang:

| drivers/net/can/usb/gs_usb.c:386:6: error: variable 'dev' is used
|                                     uninitialized whenever 'if' condition is true
|         if (hf->channel >= GS_MAX_INTF)
|             ^~~~~~~~~~~~~~~~~~~~~~~~~~
| drivers/net/can/usb/gs_usb.c:474:10: note: uninitialized use occurs here
|                           hf, dev->gs_hf_size, gs_usb_receive_bulk_callback,
|                               ^~~

Link: https://lore.kernel.org/all/20211210091158.408326-1-mkl@pengutronix.de
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/usb/gs_usb.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -328,7 +328,7 @@ static void gs_usb_receive_bulk_callback
 
 	/* device reports out of range channel id */
 	if (hf->channel >= GS_MAX_INTF)
-		goto resubmit_urb;
+		goto device_detach;
 
 	dev = usbcan->canch[hf->channel];
 
@@ -413,6 +413,7 @@ static void gs_usb_receive_bulk_callback
 
 	/* USB failure take down all interfaces */
 	if (rc == -ENODEV) {
+ device_detach:
 		for (rc = 0; rc < GS_MAX_INTF; rc++) {
 			if (usbcan->canch[rc])
 				netif_device_detach(usbcan->canch[rc]->netdev);

[PATCH 4.19 008/239] can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}

[Greg Kroah-Hartman]

From: Brian Silverman <brian.silverman@bluerivertech.com>

commit 89d58aebe14a365c25ba6645414afdbf4e41cea4 upstream.

No information is deliberately sent in hf->flags in host -> device
communications, but the open-source candleLight firmware echoes it
back, which can result in the GS_CAN_FLAG_OVERFLOW flag being set and
generating spurious ERRORFRAMEs.

While there also initialize the reserved member with 0.

Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20220106002952.25883-1-brian.silverman@bluerivertech.com
Link: https://github.com/candle-usb/candleLight_fw/issues/87
Cc: stable@vger.kernel.org
Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com>
[mkl: initialize the reserved member, too]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/usb/gs_usb.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -515,6 +515,8 @@ static netdev_tx_t gs_can_start_xmit(str
 
 	hf->echo_id = idx;
 	hf->channel = dev->channel;
+	hf->flags = 0;
+	hf->reserved = 0;
 
 	cf = (struct can_frame *)skb->data;
 

[PATCH 4.19 009/239] random: fix data race on crng_node_pool

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 5d73d1e320c3fd94ea15ba5f79301da9a8bcc7de upstream.

extract_crng() and crng_backtrack_protect() load crng_node_pool with a
plain load, which causes undefined behavior if do_numa_crng_init()
modifies it concurrently.

Fix this by using READ_ONCE().  Note: as per the previous discussion
https://lore.kernel.org/lkml/20211219025139.31085-1-ebiggers@kernel.org/T/#u,
READ_ONCE() is believed to be sufficient here, and it was requested that
it be used here instead of smp_load_acquire().

Also change do_numa_crng_init() to set crng_node_pool using
cmpxchg_release() instead of mb() + cmpxchg(), as the former is
sufficient here but is more lightweight.

Fixes: 1e7f583af67b ("random: make /dev/urandom scalable for silly userspace programs")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/random.c |   42 ++++++++++++++++++++++--------------------
 1 file changed, 22 insertions(+), 20 deletions(-)

--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -831,8 +831,8 @@ static void do_numa_crng_init(struct wor
 		crng_initialize(crng);
 		pool[i] = crng;
 	}
-	mb();
-	if (cmpxchg(&crng_node_pool, NULL, pool)) {
+	/* pairs with READ_ONCE() in select_crng() */
+	if (cmpxchg_release(&crng_node_pool, NULL, pool) != NULL) {
 		for_each_node(i)
 			kfree(pool[i]);
 		kfree(pool);
@@ -845,8 +845,26 @@ static void numa_crng_init(void)
 {
 	schedule_work(&numa_crng_init_work);
 }
+
+static struct crng_state *select_crng(void)
+{
+	struct crng_state **pool;
+	int nid = numa_node_id();
+
+	/* pairs with cmpxchg_release() in do_numa_crng_init() */
+	pool = READ_ONCE(crng_node_pool);
+	if (pool && pool[nid])
+		return pool[nid];
+
+	return &primary_crng;
+}
 #else
 static void numa_crng_init(void) {}
+
+static struct crng_state *select_crng(void)
+{
+	return &primary_crng;
+}
 #endif
 
 /*
@@ -995,15 +1013,7 @@ static void _extract_crng(struct crng_st
 
 static void extract_crng(__u8 out[CHACHA20_BLOCK_SIZE])
 {
-	struct crng_state *crng = NULL;
-
-#ifdef CONFIG_NUMA
-	if (crng_node_pool)
-		crng = crng_node_pool[numa_node_id()];
-	if (crng == NULL)
-#endif
-		crng = &primary_crng;
-	_extract_crng(crng, out);
+	_extract_crng(select_crng(), out);
 }
 
 /*
@@ -1032,15 +1042,7 @@ static void _crng_backtrack_protect(stru
 
 static void crng_backtrack_protect(__u8 tmp[CHACHA20_BLOCK_SIZE], int used)
 {
-	struct crng_state *crng = NULL;
-
-#ifdef CONFIG_NUMA
-	if (crng_node_pool)
-		crng = crng_node_pool[numa_node_id()];
-	if (crng == NULL)
-#endif
-		crng = &primary_crng;
-	_crng_backtrack_protect(crng, tmp, used);
+	_crng_backtrack_protect(select_crng(), tmp, used);
 }
 
 static ssize_t extract_crng_user(void __user *buf, size_t nbytes)

[PATCH 4.19 010/239] random: fix data race on crng init time

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 009ba8568be497c640cab7571f7bfd18345d7b24 upstream.

_extract_crng() does plain loads of crng->init_time and
crng_global_init_time, which causes undefined behavior if
crng_reseed() and RNDRESEEDCRNG modify these corrently.

Use READ_ONCE() and WRITE_ONCE() to make the behavior defined.

Don't fix the race on crng->init_time by protecting it with crng->lock,
since it's not a problem for duplicate reseedings to occur.  I.e., the
lockless access with READ_ONCE() is fine.

Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG")
Fixes: e192be9d9a30 ("random: replace non-blocking pool with a Chacha20-based CRNG")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/random.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -969,7 +969,7 @@ static void crng_reseed(struct crng_stat
 		crng->state[i+4] ^= buf.key[i] ^ rv;
 	}
 	memzero_explicit(&buf, sizeof(buf));
-	crng->init_time = jiffies;
+	WRITE_ONCE(crng->init_time, jiffies);
 	spin_unlock_irqrestore(&crng->lock, flags);
 	if (crng == &primary_crng && crng_init < 2) {
 		invalidate_batched_entropy();
@@ -996,12 +996,15 @@ static void crng_reseed(struct crng_stat
 static void _extract_crng(struct crng_state *crng,
 			  __u8 out[CHACHA20_BLOCK_SIZE])
 {
-	unsigned long v, flags;
+	unsigned long v, flags, init_time;
 
-	if (crng_ready() &&
-	    (time_after(crng_global_init_time, crng->init_time) ||
-	     time_after(jiffies, crng->init_time + CRNG_RESEED_INTERVAL)))
-		crng_reseed(crng, crng == &primary_crng ? &input_pool : NULL);
+	if (crng_ready()) {
+		init_time = READ_ONCE(crng->init_time);
+		if (time_after(READ_ONCE(crng_global_init_time), init_time) ||
+		    time_after(jiffies, init_time + CRNG_RESEED_INTERVAL))
+			crng_reseed(crng, crng == &primary_crng ?
+				    &input_pool : NULL);
+	}
 	spin_lock_irqsave(&crng->lock, flags);
 	if (arch_get_random_long(&v))
 		crng->state[14] ^= v;
@@ -2074,7 +2077,7 @@ static long random_ioctl(struct file *f,
 		if (crng_init < 2)
 			return -ENODATA;
 		crng_reseed(&primary_crng, &input_pool);
-		crng_global_init_time = jiffies - 1;
+		WRITE_ONCE(crng_global_init_time, jiffies - 1);
 		return 0;
 	default:
 		return -EINVAL;

[PATCH 4.19 011/239] staging: wlan-ng: Avoid bitwise vs logical OR warning in hfa384x_usb_throttlefn()

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit 502408a61f4b7eb4713f44bd77f4a48e6cb1b59a upstream.

A new warning in clang points out a place in this file where a bitwise
OR is being used with boolean expressions:

In file included from drivers/staging/wlan-ng/prism2usb.c:2:
drivers/staging/wlan-ng/hfa384x_usb.c:3787:7: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
            ((test_and_clear_bit(THROTTLE_RX, &hw->usb_flags) &&
            ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/wlan-ng/hfa384x_usb.c:3787:7: note: cast one or both operands to int to silence this warning
1 warning generated.

The comment explains that short circuiting here is undesirable, as the
calls to test_and_{clear,set}_bit() need to happen for both sides of the
expression.

Clang's suggestion would work to silence the warning but the readability
of the expression would suffer even more. To clean up the warning and
make the block more readable, use a variable for each side of the
bitwise expression.

Link: https://github.com/ClangBuiltLinux/linux/issues/1478
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211014215703.3705371-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/wlan-ng/hfa384x_usb.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -3903,18 +3903,18 @@ static void hfa384x_usb_throttlefn(struc
 
 	spin_lock_irqsave(&hw->ctlxq.lock, flags);
 
-	/*
-	 * We need to check BOTH the RX and the TX throttle controls,
-	 * so we use the bitwise OR instead of the logical OR.
-	 */
 	pr_debug("flags=0x%lx\n", hw->usb_flags);
-	if (!hw->wlandev->hwremoved &&
-	    ((test_and_clear_bit(THROTTLE_RX, &hw->usb_flags) &&
-	      !test_and_set_bit(WORK_RX_RESUME, &hw->usb_flags)) |
-	     (test_and_clear_bit(THROTTLE_TX, &hw->usb_flags) &&
-	      !test_and_set_bit(WORK_TX_RESUME, &hw->usb_flags))
-	    )) {
-		schedule_work(&hw->usb_work);
+	if (!hw->wlandev->hwremoved) {
+		bool rx_throttle = test_and_clear_bit(THROTTLE_RX, &hw->usb_flags) &&
+				   !test_and_set_bit(WORK_RX_RESUME, &hw->usb_flags);
+		bool tx_throttle = test_and_clear_bit(THROTTLE_TX, &hw->usb_flags) &&
+				   !test_and_set_bit(WORK_TX_RESUME, &hw->usb_flags);
+		/*
+		 * We need to check BOTH the RX and the TX throttle controls,
+		 * so we use the bitwise OR instead of the logical OR.
+		 */
+		if (rx_throttle | tx_throttle)
+			schedule_work(&hw->usb_work);
 	}
 
 	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);

[PATCH 4.19 012/239] drm/i915: Avoid bitwise vs logical OR warning in snb_wm_latency_quirk()

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit 2e70570656adfe1c5d9a29940faa348d5f132199 upstream.

A new warning in clang points out a place in this file where a bitwise
OR is being used with boolean types:

drivers/gpu/drm/i915/intel_pm.c:3066:12: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
        changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) |
                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This construct is intentional, as it allows every one of the calls to
ilk_increase_wm_latency() to occur (instead of short circuiting with
logical OR) while still caring about the result of each call.

To make this clearer to the compiler, use the '|=' operator to assign
the result of each ilk_increase_wm_latency() call to changed, which
keeps the meaning of the code the same but makes it obvious that every
one of these calls is expected to happen.

Link: https://github.com/ClangBuiltLinux/linux/issues/1473
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Dávid Bolvanský <david.bolvansky@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014211916.3550122-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/intel_pm.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3002,9 +3002,9 @@ static void snb_wm_latency_quirk(struct
 	 * The BIOS provided WM memory latency values are often
 	 * inadequate for high resolution displays. Adjust them.
 	 */
-	changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) |
-		ilk_increase_wm_latency(dev_priv, dev_priv->wm.spr_latency, 12) |
-		ilk_increase_wm_latency(dev_priv, dev_priv->wm.cur_latency, 12);
+	changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12);
+	changed |= ilk_increase_wm_latency(dev_priv, dev_priv->wm.spr_latency, 12);
+	changed |= ilk_increase_wm_latency(dev_priv, dev_priv->wm.cur_latency, 12);
 
 	if (!changed)
 		return;

[PATCH 4.19 013/239] kbuild: Add $(KBUILD_HOSTLDFLAGS) to has_libelf test

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit f634ca650f724347892068489c7920631a3aac6a upstream.

Normally, invocations of $(HOSTCC) include $(KBUILD_HOSTLDFLAGS), which
in turn includes $(HOSTLDFLAGS), which allows users to pass in their own
flags when linking. However, the 'has_libelf' test does not, meaning
that if a user requests a specific linker via HOSTLDFLAGS=-fuse-ld=...,
it is not respected and the build might error.

For example, if a user building with clang wants to use all of the LLVM
tools without any GNU tools, they might remove all of the GNU tools from
their system or PATH then build with

$ make HOSTLDFLAGS=-fuse-ld=lld LLVM=1 LLVM_IAS=1

which says use all of the LLVM tools, the integrated assembler, and
ld.lld for linking host executables. Without this change, the build will
error because $(HOSTCC) uses its default linker, rather than the one
requested via -fuse-ld=..., which is GNU ld in clang's case in a default
configuration.

error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please
install libelf-dev, libelf-devel or elfutils-libelf-devel
make[1]: *** [Makefile:1260: prepare-objtool] Error 1

Add $(KBUILD_HOSTLDFLAGS) to the 'has_libelf' test so that the linker
choice is respected.

Link: https://github.com/ClangBuiltLinux/linux/issues/479
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Makefile
+++ b/Makefile
@@ -972,7 +972,7 @@ HOST_LIBELF_LIBS = $(shell pkg-config li
 
 ifdef CONFIG_STACK_VALIDATION
   has_libelf := $(call try-run,\
-		echo "int main() {}" | $(HOSTCC) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
+		echo "int main() {}" | $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
   ifeq ($(has_libelf),1)
     objtool_target := tools/objtool FORCE
   else

[PATCH 4.19 014/239] orangefs: Fix the size of a memory allocation in orangefs_bufmap_alloc()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit 40a74870b2d1d3d44e13b3b73c6571dd34f5614d upstream.

'buffer_index_array' really looks like a bitmap. So it should be allocated
as such.
When kzalloc is called, a number of bytes is expected, but a number of
longs is passed instead.

In get(), if not enough memory is allocated, un-allocated memory may be
read or written.

So use bitmap_zalloc() to safely allocate the correct memory size and
avoid un-expected behavior.

While at it, change the corresponding kfree() into bitmap_free() to keep
the semantic.

Fixes: ea2c9c9f6574 ("orangefs: bufmap rewrite")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/orangefs/orangefs-bufmap.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/fs/orangefs/orangefs-bufmap.c
+++ b/fs/orangefs/orangefs-bufmap.c
@@ -179,7 +179,7 @@ orangefs_bufmap_free(struct orangefs_buf
 {
 	kfree(bufmap->page_array);
 	kfree(bufmap->desc_array);
-	kfree(bufmap->buffer_index_array);
+	bitmap_free(bufmap->buffer_index_array);
 	kfree(bufmap);
 }
 
@@ -229,8 +229,7 @@ orangefs_bufmap_alloc(struct ORANGEFS_de
 	bufmap->desc_size = user_desc->size;
 	bufmap->desc_shift = ilog2(bufmap->desc_size);
 
-	bufmap->buffer_index_array =
-		kzalloc(DIV_ROUND_UP(bufmap->desc_count, BITS_PER_LONG), GFP_KERNEL);
+	bufmap->buffer_index_array = bitmap_zalloc(bufmap->desc_count, GFP_KERNEL);
 	if (!bufmap->buffer_index_array)
 		goto out_free_bufmap;
 
@@ -253,7 +252,7 @@ orangefs_bufmap_alloc(struct ORANGEFS_de
 out_free_desc_array:
 	kfree(bufmap->desc_array);
 out_free_index_array:
-	kfree(bufmap->buffer_index_array);
+	bitmap_free(bufmap->buffer_index_array);
 out_free_bufmap:
 	kfree(bufmap);
 out:

[PATCH 4.19 015/239] KVM: s390: Clarify SIGP orders versus STOP/RESTART

[Greg Kroah-Hartman]

From: Eric Farman <farman@linux.ibm.com>

commit 812de04661c4daa7ac385c0dfd62594540538034 upstream.

With KVM_CAP_S390_USER_SIGP, there are only five Signal Processor
orders (CONDITIONAL EMERGENCY SIGNAL, EMERGENCY SIGNAL, EXTERNAL CALL,
SENSE, and SENSE RUNNING STATUS) which are intended for frequent use
and thus are processed in-kernel. The remainder are sent to userspace
with the KVM_CAP_S390_USER_SIGP capability. Of those, three orders
(RESTART, STOP, and STOP AND STORE STATUS) have the potential to
inject work back into the kernel, and thus are asynchronous.

Let's look for those pending IRQs when processing one of the in-kernel
SIGP orders, and return BUSY (CC2) if one is in process. This is in
agreement with the Principles of Operation, which states that only one
order can be "active" on a CPU at a time.

Cc: stable@vger.kernel.org
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20211213210550.856213-2-farman@linux.ibm.com
[borntraeger@linux.ibm.com: add stable tag]
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/kvm/interrupt.c |    7 +++++++
 arch/s390/kvm/kvm-s390.c  |    9 +++++++--
 arch/s390/kvm/kvm-s390.h  |    1 +
 arch/s390/kvm/sigp.c      |   28 ++++++++++++++++++++++++++++
 4 files changed, 43 insertions(+), 2 deletions(-)

--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -1900,6 +1900,13 @@ int kvm_s390_is_stop_irq_pending(struct
 	return test_bit(IRQ_PEND_SIGP_STOP, &li->pending_irqs);
 }
 
+int kvm_s390_is_restart_irq_pending(struct kvm_vcpu *vcpu)
+{
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+
+	return test_bit(IRQ_PEND_RESTART, &li->pending_irqs);
+}
+
 void kvm_s390_clear_stop_irq(struct kvm_vcpu *vcpu)
 {
 	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -3844,10 +3844,15 @@ void kvm_s390_vcpu_stop(struct kvm_vcpu
 	spin_lock(&vcpu->kvm->arch.start_stop_lock);
 	online_vcpus = atomic_read(&vcpu->kvm->online_vcpus);
 
-	/* SIGP STOP and SIGP STOP AND STORE STATUS has been fully processed */
+	/*
+	 * Set the VCPU to STOPPED and THEN clear the interrupt flag,
+	 * now that the SIGP STOP and SIGP STOP AND STORE STATUS orders
+	 * have been fully processed. This will ensure that the VCPU
+	 * is kept BUSY if another VCPU is inquiring with SIGP SENSE.
+	 */
+	kvm_s390_set_cpuflags(vcpu, CPUSTAT_STOPPED);
 	kvm_s390_clear_stop_irq(vcpu);
 
-	kvm_s390_set_cpuflags(vcpu, CPUSTAT_STOPPED);
 	__disable_ibs_on_vcpu(vcpu);
 
 	for (i = 0; i < online_vcpus; i++) {
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -372,6 +372,7 @@ void kvm_s390_destroy_adapters(struct kv
 int kvm_s390_ext_call_pending(struct kvm_vcpu *vcpu);
 extern struct kvm_device_ops kvm_flic_ops;
 int kvm_s390_is_stop_irq_pending(struct kvm_vcpu *vcpu);
+int kvm_s390_is_restart_irq_pending(struct kvm_vcpu *vcpu);
 void kvm_s390_clear_stop_irq(struct kvm_vcpu *vcpu);
 int kvm_s390_set_irq_state(struct kvm_vcpu *vcpu,
 			   void __user *buf, int len);
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -288,6 +288,34 @@ static int handle_sigp_dst(struct kvm_vc
 	if (!dst_vcpu)
 		return SIGP_CC_NOT_OPERATIONAL;
 
+	/*
+	 * SIGP RESTART, SIGP STOP, and SIGP STOP AND STORE STATUS orders
+	 * are processed asynchronously. Until the affected VCPU finishes
+	 * its work and calls back into KVM to clear the (RESTART or STOP)
+	 * interrupt, we need to return any new non-reset orders "busy".
+	 *
+	 * This is important because a single VCPU could issue:
+	 *  1) SIGP STOP $DESTINATION
+	 *  2) SIGP SENSE $DESTINATION
+	 *
+	 * If the SIGP SENSE would not be rejected as "busy", it could
+	 * return an incorrect answer as to whether the VCPU is STOPPED
+	 * or OPERATING.
+	 */
+	if (order_code != SIGP_INITIAL_CPU_RESET &&
+	    order_code != SIGP_CPU_RESET) {
+		/*
+		 * Lockless check. Both SIGP STOP and SIGP (RE)START
+		 * properly synchronize everything while processing
+		 * their orders, while the guest cannot observe a
+		 * difference when issuing other orders from two
+		 * different VCPUs.
+		 */
+		if (kvm_s390_is_stop_irq_pending(dst_vcpu) ||
+		    kvm_s390_is_restart_irq_pending(dst_vcpu))
+			return SIGP_CC_BUSY;
+	}
+
 	switch (order_code) {
 	case SIGP_SENSE:
 		vcpu->stat.instruction_sigp_sense++;

[PATCH 4.19 016/239] media: uvcvideo: fix division by zero at stream start

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 8aa637bf6d70d2fb2ad4d708d8b9dd02b1c095df upstream.

Add the missing bulk-endpoint max-packet sanity check to
uvc_video_start_transfer() to avoid division by zero in
uvc_alloc_urb_buffers() in case a malicious device has broken
descriptors (or when doing descriptor fuzz testing).

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver")
Cc: stable@vger.kernel.org      # 2.6.26
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/uvc/uvc_video.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1854,6 +1854,10 @@ static int uvc_init_video(struct uvc_str
 		if (ep == NULL)
 			return -EIO;
 
+		/* Reject broken descriptors. */
+		if (usb_endpoint_maxp(&ep->desc) == 0)
+			return -EIO;
+
 		ret = uvc_init_video_bulk(stream, ep, gfp_flags);
 	}
 

[PATCH 4.19 017/239] rtlwifi: rtl8192cu: Fix WARNING when calling local_irq_restore() with interrupts enabled

[Greg Kroah-Hartman]

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 8b144dedb928e4e2f433a328d58f44c3c098d63e upstream.

Syzbot reports the following WARNING:

[200~raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 1206 at kernel/locking/irqflag-debug.c:10
   warn_bogus_irq_restore+0x1d/0x20 kernel/locking/irqflag-debug.c:10

Hardware initialization for the rtl8188cu can run for as long as 350 ms,
and the routine may be called with interrupts disabled. To avoid locking
the machine for this long, the current routine saves the interrupt flags
and enables local interrupts. The problem is that it restores the flags
at the end without disabling local interrupts first.

This patch fixes commit a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long
disable of IRQs").

Reported-by: syzbot+cce1ee31614c171f5595@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Fixes: a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long disable of IRQs")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211215171105.20623-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
@@ -1020,6 +1020,7 @@ int rtl92cu_hw_init(struct ieee80211_hw
 	_InitPABias(hw);
 	rtl92c_dm_init(hw);
 exit:
+	local_irq_disable();
 	local_irq_restore(flags);
 	return err;
 }

[PATCH 4.19 018/239] firmware: qemu_fw_cfg: fix sysfs information leak

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 1b656e9aad7f4886ed466094d1dc5ee4dd900d20 upstream.

Make sure to always NUL-terminate file names retrieved from the firmware
to avoid accessing data beyond the entry slab buffer and exposing it
through sysfs in case the firmware data is corrupt.

Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: stable@vger.kernel.org      # 4.6
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-4-johan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/qemu_fw_cfg.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/firmware/qemu_fw_cfg.c
+++ b/drivers/firmware/qemu_fw_cfg.c
@@ -598,7 +598,7 @@ static int fw_cfg_register_file(const st
 	/* set file entry information */
 	entry->size = be32_to_cpu(f->size);
 	entry->select = be16_to_cpu(f->select);
-	memcpy(entry->name, f->name, FW_CFG_MAX_FILE_PATH);
+	strscpy(entry->name, f->name, FW_CFG_MAX_FILE_PATH);
 
 	/* register entry under "/sys/firmware/qemu_fw_cfg/by_key/" */
 	err = kobject_init_and_add(&entry->kobj, &fw_cfg_sysfs_entry_ktype,

[PATCH 4.19 019/239] firmware: qemu_fw_cfg: fix NULL-pointer deref on duplicate entries

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit d3e305592d69e21e36b76d24ca3c01971a2d09be upstream.

Commit fe3c60684377 ("firmware: Fix a reference count leak.") "fixed"
a kobject leak in the file registration helper by properly calling
kobject_put() for the entry in case registration of the object fails
(e.g. due to a name collision).

This would however result in a NULL pointer dereference when the
release function tries to remove the never added entry from the
fw_cfg_entry_cache list.

Fix this by moving the list-removal out of the release function.

Note that the offending commit was one of the benign looking umn.edu
fixes which was reviewed but not reverted. [1][2]

[1] https://lore.kernel.org/r/202105051005.49BFABCE@keescook
[2] https://lore.kernel.org/all/YIg7ZOZvS3a8LjSv@kroah.com

Fixes: fe3c60684377 ("firmware: Fix a reference count leak.")
Cc: stable@vger.kernel.org      # 5.8
Cc: Qiushi Wu <wu000273@umn.edu>
Cc: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-2-johan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/qemu_fw_cfg.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/firmware/qemu_fw_cfg.c
+++ b/drivers/firmware/qemu_fw_cfg.c
@@ -385,9 +385,7 @@ static void fw_cfg_sysfs_cache_cleanup(v
 	struct fw_cfg_sysfs_entry *entry, *next;
 
 	list_for_each_entry_safe(entry, next, &fw_cfg_entry_cache, list) {
-		/* will end up invoking fw_cfg_sysfs_cache_delist()
-		 * via each object's release() method (i.e. destructor)
-		 */
+		fw_cfg_sysfs_cache_delist(entry);
 		kobject_put(&entry->kobj);
 	}
 }
@@ -445,7 +443,6 @@ static void fw_cfg_sysfs_release_entry(s
 {
 	struct fw_cfg_sysfs_entry *entry = to_entry(kobj);
 
-	fw_cfg_sysfs_cache_delist(entry);
 	kfree(entry);
 }
 

[PATCH 4.19 020/239] firmware: qemu_fw_cfg: fix kobject leak in probe error path

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 47a1db8e797da01a1309bf42e0c0d771d4e4d4f3 upstream.

An initialised kobject must be freed using kobject_put() to avoid
leaking associated resources (e.g. the object name).

Commit fe3c60684377 ("firmware: Fix a reference count leak.") "fixed"
the leak in the first error path of the file registration helper but
left the second one unchanged. This "fix" would however result in a NULL
pointer dereference due to the release function also removing the never
added entry from the fw_cfg_entry_cache list. This has now been
addressed.

Fix the remaining kobject leak by restoring the common error path and
adding the missing kobject_put().

Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: stable@vger.kernel.org      # 4.6
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/qemu_fw_cfg.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/drivers/firmware/qemu_fw_cfg.c
+++ b/drivers/firmware/qemu_fw_cfg.c
@@ -600,15 +600,13 @@ static int fw_cfg_register_file(const st
 	/* register entry under "/sys/firmware/qemu_fw_cfg/by_key/" */
 	err = kobject_init_and_add(&entry->kobj, &fw_cfg_sysfs_entry_ktype,
 				   fw_cfg_sel_ko, "%d", entry->select);
-	if (err) {
-		kobject_put(&entry->kobj);
-		return err;
-	}
+	if (err)
+		goto err_put_entry;
 
 	/* add raw binary content access */
 	err = sysfs_create_bin_file(&entry->kobj, &fw_cfg_sysfs_attr_raw);
 	if (err)
-		goto err_add_raw;
+		goto err_del_entry;
 
 	/* try adding "/sys/firmware/qemu_fw_cfg/by_name/" symlink */
 	fw_cfg_build_symlink(fw_cfg_fname_kset, &entry->kobj, entry->name);
@@ -617,9 +615,10 @@ static int fw_cfg_register_file(const st
 	fw_cfg_sysfs_cache_enlist(entry);
 	return 0;
 
-err_add_raw:
+err_del_entry:
 	kobject_del(&entry->kobj);
-	kfree(entry);
+err_put_entry:
+	kobject_put(&entry->kobj);
 	return err;
 }
 

[PATCH 4.19 021/239] ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows

[Greg Kroah-Hartman]

From: Christian Lachner <gladiac@gmail.com>

commit c1933008679586b20437280463110c967d66f865 upstream.

This patch addresses an issue where after rebooting from Windows into Linux
there would be no audio output.

It turns out that the Realtek Audio driver on Windows changes some coeffs
which are not being reset/reinitialized when rebooting the machine. As a
result, there is no audio output until these coeffs are being reset to
their initial state. This patch takes care of that by setting known-good
(initial) values to the coeffs.

We initially relied upon alc1220_fixup_clevo_p950() to fix some pins in the
connection list. However, it also sets coef 0x7 which does not need to be
touched. Furthermore, to prevent mixing device-specific quirks I introduced
a new alc1220_fixup_gb_x570() which is heavily based on
alc1220_fixup_clevo_p950() but does not set coeff 0x7 and fixes the coeffs
that are actually needed instead.

This new alc1220_fixup_gb_x570() is believed to also work for other boards,
like the Gigabyte X570 Aorus Extreme and the newer Gigabyte Aorus X570S
Master. However, as there is no way for me to test these I initially only
enable this new behaviour for the mainboard I have which is the Gigabyte
X570(non-S) Aorus Master.

I tested this patch on the 5.15 branch as well as on master and it is
working well for me.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Fixes: 0d45e86d2267d ("ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220103140517.30273-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1910,6 +1910,7 @@ enum {
 	ALC887_FIXUP_ASUS_BASS,
 	ALC887_FIXUP_BASS_CHMAP,
 	ALC1220_FIXUP_GB_DUAL_CODECS,
+	ALC1220_FIXUP_GB_X570,
 	ALC1220_FIXUP_CLEVO_P950,
 	ALC1220_FIXUP_CLEVO_PB51ED,
 	ALC1220_FIXUP_CLEVO_PB51ED_PINS,
@@ -2099,6 +2100,29 @@ static void alc1220_fixup_gb_dual_codecs
 	}
 }
 
+static void alc1220_fixup_gb_x570(struct hda_codec *codec,
+				     const struct hda_fixup *fix,
+				     int action)
+{
+	static const hda_nid_t conn1[] = { 0x0c };
+	static const struct coef_fw gb_x570_coefs[] = {
+		WRITE_COEF(0x1a, 0x01c1),
+		WRITE_COEF(0x1b, 0x0202),
+		WRITE_COEF(0x43, 0x3005),
+		{}
+	};
+
+	switch (action) {
+	case HDA_FIXUP_ACT_PRE_PROBE:
+		snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn1), conn1);
+		snd_hda_override_conn_list(codec, 0x1b, ARRAY_SIZE(conn1), conn1);
+		break;
+	case HDA_FIXUP_ACT_INIT:
+		alc_process_coef_fw(codec, gb_x570_coefs);
+		break;
+	}
+}
+
 static void alc1220_fixup_clevo_p950(struct hda_codec *codec,
 				     const struct hda_fixup *fix,
 				     int action)
@@ -2401,6 +2425,10 @@ static const struct hda_fixup alc882_fix
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc1220_fixup_gb_dual_codecs,
 	},
+	[ALC1220_FIXUP_GB_X570] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc1220_fixup_gb_x570,
+	},
 	[ALC1220_FIXUP_CLEVO_P950] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc1220_fixup_clevo_p950,
@@ -2503,7 +2531,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x13fe, 0x1009, "Advantech MIT-W101", ALC886_FIXUP_EAPD),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
-	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),

[PATCH 4.19 022/239] HID: uhid: Fix worker destroying device without any protection

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 4ea5763fb79ed89b3bdad455ebf3f33416a81624 upstream.

uhid has to run hid_add_device() from workqueue context while allowing
parallel use of the userspace API (which is protected with ->devlock).
But hid_add_device() can fail. Currently, that is handled by immediately
destroying the associated HID device, without using ->devlock - but if
there are concurrent requests from userspace, that's wrong and leads to
NULL dereferences and/or memory corruption (via use-after-free).

Fix it by leaving the HID device as-is in the worker. We can clean it up
later, either in the UHID_DESTROY command handler or in the ->release()
handler.

Cc: stable@vger.kernel.org
Fixes: 67f8ecc550b5 ("HID: uhid: fix timeout when probe races with IO")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/uhid.c |   29 +++++++++++++++++++++++++----
 1 file changed, 25 insertions(+), 4 deletions(-)

--- a/drivers/hid/uhid.c
+++ b/drivers/hid/uhid.c
@@ -31,11 +31,22 @@
 
 struct uhid_device {
 	struct mutex devlock;
+
+	/* This flag tracks whether the HID device is usable for commands from
+	 * userspace. The flag is already set before hid_add_device(), which
+	 * runs in workqueue context, to allow hid_add_device() to communicate
+	 * with userspace.
+	 * However, if hid_add_device() fails, the flag is cleared without
+	 * holding devlock.
+	 * We guarantee that if @running changes from true to false while you're
+	 * holding @devlock, it's still fine to access @hid.
+	 */
 	bool running;
 
 	__u8 *rd_data;
 	uint rd_size;
 
+	/* When this is NULL, userspace may use UHID_CREATE/UHID_CREATE2. */
 	struct hid_device *hid;
 	struct uhid_event input_buf;
 
@@ -66,9 +77,18 @@ static void uhid_device_add_worker(struc
 	if (ret) {
 		hid_err(uhid->hid, "Cannot register HID device: error %d\n", ret);
 
-		hid_destroy_device(uhid->hid);
-		uhid->hid = NULL;
+		/* We used to call hid_destroy_device() here, but that's really
+		 * messy to get right because we have to coordinate with
+		 * concurrent writes from userspace that might be in the middle
+		 * of using uhid->hid.
+		 * Just leave uhid->hid as-is for now, and clean it up when
+		 * userspace tries to close or reinitialize the uhid instance.
+		 *
+		 * However, we do have to clear the ->running flag and do a
+		 * wakeup to make sure userspace knows that the device is gone.
+		 */
 		uhid->running = false;
+		wake_up_interruptible(&uhid->report_wait);
 	}
 }
 
@@ -477,7 +497,7 @@ static int uhid_dev_create2(struct uhid_
 	void *rd_data;
 	int ret;
 
-	if (uhid->running)
+	if (uhid->hid)
 		return -EALREADY;
 
 	rd_size = ev->u.create2.rd_size;
@@ -559,7 +579,7 @@ static int uhid_dev_create(struct uhid_d
 
 static int uhid_dev_destroy(struct uhid_device *uhid)
 {
-	if (!uhid->running)
+	if (!uhid->hid)
 		return -EINVAL;
 
 	uhid->running = false;
@@ -568,6 +588,7 @@ static int uhid_dev_destroy(struct uhid_
 	cancel_work_sync(&uhid->worker);
 
 	hid_destroy_device(uhid->hid);
+	uhid->hid = NULL;
 	kfree(uhid->rd_data);
 
 	return 0;

[PATCH 4.19 023/239] HID: wacom: Reset expected and received contact counts at the same time

[Greg Kroah-Hartman]

From: Jason Gerecke <killertofu@gmail.com>

commit 546e41ac994cc185ef3de610ca849a294b5df3ba upstream.

These two values go hand-in-hand and must be valid for the driver to
behave correctly. We are currently lazy about updating the values and
rely on the "expected" code flow to take care of making sure they're
valid at the point they're needed. The "expected" flow changed somewhat
with commit f8b6a74719b5 ("HID: wacom: generic: Support multiple tools
per report"), however. This led to problems with the DTH-2452 due (in
part) to *all* contacts being fully processed -- even those past the
expected contact count. Specifically, the received count gets reset to
0 once all expected fingers are processed, but not the expected count.
The rest of the contacts in the report are then *also* processed since
now the driver thinks we've only processed 0 of N expected contacts.

Later commits such as 7fb0413baa7f (HID: wacom: Use "Confidence" flag to
prevent reporting invalid contacts) worked around the DTH-2452 issue by
skipping the invalid contacts at the end of the report, but this is not
a complete fix. The confidence flag cannot be relied on when a contact
is removed (see the following patch), and dealing with that condition
re-introduces the DTH-2452 issue unless we also address this contact
count laziness. By resetting expected and received counts at the same
time we ensure the driver understands that there are 0 more contacts
expected in the report. Similarly, we also make sure to reset the
received count if for some reason we're out of sync in the pre-report
phase.

Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: f8b6a74719b5 ("HID: wacom: generic: Support multiple tools per report")
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/wacom_wac.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2620,11 +2620,14 @@ static void wacom_wac_finger_pre_report(
 	    hid_data->cc_index >= 0) {
 		struct hid_field *field = report->field[hid_data->cc_index];
 		int value = field->value[hid_data->cc_value_index];
-		if (value)
+		if (value) {
 			hid_data->num_expected = value;
+			hid_data->num_received = 0;
+		}
 	}
 	else {
 		hid_data->num_expected = wacom_wac->features.touch_max;
+		hid_data->num_received = 0;
 	}
 }
 
@@ -2648,6 +2651,7 @@ static void wacom_wac_finger_report(stru
 
 	input_sync(input);
 	wacom_wac->hid_data.num_received = 0;
+	wacom_wac->hid_data.num_expected = 0;
 
 	/* keep touch state for pen event */
 	wacom_wac->shared->touch_down = wacom_wac_finger_count_touches(wacom_wac);

[PATCH 4.19 024/239] HID: wacom: Ignore the confidence flag when a touch is removed

[Greg Kroah-Hartman]

From: Jason Gerecke <killertofu@gmail.com>

commit df03e9bd6d4806619b4cdc91a3d7695818a8e2b7 upstream.

AES hardware may internally re-classify a contact that it thought was
intentional as a palm. Intentional contacts are reported as "down" with
the confidence bit set. When this re-classification occurs, however, the
state transitions to "up" with the confidence bit cleared. This kind of
transition appears to be legal according to Microsoft docs, but we do
not handle it correctly. Because the confidence bit is clear, we don't
call `wacom_wac_finger_slot` and update userspace. This causes hung
touches that confuse userspace and interfere with pen arbitration.

This commit adds a special case to ignore the confidence flag if a contact
is reported as removed. This ensures we do not leave a hung touch if one
of these re-classification events occured. Ideally we'd have some way to
also let userspace know that the touch has been re-classified as a palm
and needs to be canceled, but that's not possible right now :)

Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: 7fb0413baa7f (HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/wacom_wac.c |   29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2529,6 +2529,24 @@ static void wacom_wac_finger_slot(struct
 	}
 }
 
+static bool wacom_wac_slot_is_active(struct input_dev *dev, int key)
+{
+	struct input_mt *mt = dev->mt;
+	struct input_mt_slot *s;
+
+	if (!mt)
+		return false;
+
+	for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
+		if (s->key == key &&
+			input_mt_get_value(s, ABS_MT_TRACKING_ID) >= 0) {
+			return true;
+		}
+	}
+
+	return false;
+}
+
 static void wacom_wac_finger_event(struct hid_device *hdev,
 		struct hid_field *field, struct hid_usage *usage, __s32 value)
 {
@@ -2571,9 +2589,14 @@ static void wacom_wac_finger_event(struc
 
 
 	if (usage->usage_index + 1 == field->report_count) {
-		if (equivalent_usage == wacom_wac->hid_data.last_slot_field &&
-		    wacom_wac->hid_data.confidence)
-			wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
+		if (equivalent_usage == wacom_wac->hid_data.last_slot_field) {
+			bool touch_removed = wacom_wac_slot_is_active(wacom_wac->touch_input,
+				wacom_wac->hid_data.id) && !wacom_wac->hid_data.tipswitch;
+
+			if (wacom_wac->hid_data.confidence || touch_removed) {
+				wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
+			}
+		}
 	}
 }
 

[PATCH 4.19 025/239] HID: wacom: Avoid using stale array indicies to read contact count

[Greg Kroah-Hartman]

From: Jason Gerecke <killertofu@gmail.com>

commit 20f3cf5f860f9f267a6a6e5642d3d0525edb1814 upstream.

If we ever see a touch report with contact count data we initialize
several variables used to read the contact count in the pre-report
phase. These variables are never reset if we process a report which
doesn't contain a contact count, however. This can cause the pre-
report function to trigger a read of arbitrary memory (e.g. NULL
if we're lucky) and potentially crash the driver.

This commit restores resetting of the variables back to default
"none" values that were used prior to the commit mentioned
below.

Link: https://github.com/linuxwacom/input-wacom/issues/276
Fixes: 003f50ab673c (HID: wacom: Update last_slot_field during pre_report phase)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/wacom_wac.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2610,6 +2610,10 @@ static void wacom_wac_finger_pre_report(
 
 	hid_data->confidence = true;
 
+	hid_data->cc_report = 0;
+	hid_data->cc_index = -1;
+	hid_data->cc_value_index = -1;
+
 	for (i = 0; i < report->maxfield; i++) {
 		struct hid_field *field = report->field[i];
 		int j;

[PATCH 4.19 026/239] f2fs: fix to do sanity check in is_alive()

[Greg Kroah-Hartman]

From: Chao Yu <chao@kernel.org>

commit 77900c45ee5cd5da63bd4d818a41dbdf367e81cd upstream.

In fuzzed image, SSA table may indicate that a data block belongs to
invalid node, which node ID is out-of-range (0, 1, 2 or max_nid), in
order to avoid migrating inconsistent data in such corrupted image,
let's do sanity check anyway before data block migration.

Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/f2fs/gc.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -589,6 +589,9 @@ static bool is_alive(struct f2fs_sb_info
 		set_sbi_flag(sbi, SBI_NEED_FSCK);
 	}
 
+	if (f2fs_check_nid_range(sbi, dni->ino))
+		return false;
+
 	*nofs = ofs_of_node(node_page);
 	source_blkaddr = datablock_addr(NULL, node_page, ofs_in_node);
 	f2fs_put_page(node_page, 1);

[PATCH 4.19 027/239] nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit dded08927ca3c31a5c37f8e7f95fe98770475dd4 upstream.

Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer
(which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after
a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM.

KASAN report:

  BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0
  Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899

  CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x45/0x59
   ? nfc_alloc_send_skb+0x2d/0xc0
   __kasan_report.cold+0x117/0x11c
   ? mark_lock+0x480/0x4f0
   ? nfc_alloc_send_skb+0x2d/0xc0
   kasan_report+0x38/0x50
   nfc_alloc_send_skb+0x2d/0xc0
   nfc_llcp_send_ui_frame+0x18c/0x2a0
   ? nfc_llcp_send_i_frame+0x230/0x230
   ? __local_bh_enable_ip+0x86/0xe0
   ? llcp_sock_connect+0x470/0x470
   ? llcp_sock_connect+0x470/0x470
   sock_sendmsg+0x8e/0xa0
   ____sys_sendmsg+0x253/0x3f0
   ...

The issue was visible only with multiple simultaneous calls to bind() and
sendmsg(), which resulted in most of the bind() calls to fail.  The
bind() was failing on checking if there is available WKS/SDP/SAP
(respective bit in 'struct nfc_llcp_local' fields).  When there was no
available WKS/SDP/SAP, the bind returned error but the sendmsg() to such
socket was able to trigger mentioned NULL pointer dereference of
nfc_llcp_sock->dev.

The code looks simply racy and currently it protects several paths
against race with checks for (!nfc_llcp_sock->local) which is NULL-ified
in error paths of bind().  The llcp_sock_sendmsg() did not have such
check but called function nfc_llcp_send_ui_frame() had, although not
protected with lock_sock().

Therefore the race could look like (same socket is used all the time):
  CPU0                                     CPU1
  ====                                     ====
  llcp_sock_bind()
  - lock_sock()
    - success
  - release_sock()
  - return 0
                                           llcp_sock_sendmsg()
                                           - lock_sock()
                                           - release_sock()
  llcp_sock_bind(), same socket
  - lock_sock()
    - error
                                           - nfc_llcp_send_ui_frame()
                                             - if (!llcp_sock->local)
    - llcp_sock->local = NULL
    - nfc_put_device(dev)
                                             - dereference llcp_sock->dev
  - release_sock()
  - return -ERRNO

The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the
lock, which is racy and ineffective check.  Instead, its caller
llcp_sock_sendmsg(), should perform the check inside lock_sock().

Reported-and-tested-by: syzbot+7f23bcddf626e0593a39@syzkaller.appspotmail.com
Fixes: b874dec21d1c ("NFC: Implement LLCP connection less Tx path")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/llcp_sock.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/net/nfc/llcp_sock.c
+++ b/net/nfc/llcp_sock.c
@@ -796,6 +796,11 @@ static int llcp_sock_sendmsg(struct sock
 
 	lock_sock(sk);
 
+	if (!llcp_sock->local) {
+		release_sock(sk);
+		return -ENODEV;
+	}
+
 	if (sk->sk_type == SOCK_DGRAM) {
 		DECLARE_SOCKADDR(struct sockaddr_nfc_llcp *, addr,
 				 msg->msg_name);

[PATCH 4.19 028/239] mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6

[Greg Kroah-Hartman]

From: Stefan Riedmueller <s.riedmueller@phytec.de>

commit aa1baa0e6c1aa4872e481dce4fc7fd6f3dd8496b upstream.

There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Cc: stable@vger.kernel.org
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c |    9 ---------
 1 file changed, 9 deletions(-)

--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -612,15 +612,6 @@ static int gpmi_get_clks(struct gpmi_nan
 		r->clock[i] = clk;
 	}
 
-	if (GPMI_IS_MX6(this))
-		/*
-		 * Set the default value for the gpmi clock.
-		 *
-		 * If you want to use the ONFI nand which is in the
-		 * Synchronous Mode, you should change the clock as you need.
-		 */
-		clk_set_rate(r->clock[0], 22000000);
-
 	return 0;
 
 err_clock:

[PATCH 4.19 029/239] x86/gpu: Reserve stolen memory for first integrated Intel GPU

[Greg Kroah-Hartman]

From: Lucas De Marchi <lucas.demarchi@intel.com>

commit 9c494ca4d3a535f9ca11ad6af1813983c1c6cbdd upstream.

"Stolen memory" is memory set aside for use by an Intel integrated GPU.
The intel_graphics_quirks() early quirk reserves this memory when it is
called for a GPU that appears in the intel_early_ids[] table of integrated
GPUs.

Previously intel_graphics_quirks() was marked as QFLAG_APPLY_ONCE, so it
was called only for the first Intel GPU found.  If a discrete GPU happened
to be enumerated first, intel_graphics_quirks() was called for it but not
for any integrated GPU found later.  Therefore, stolen memory for such an
integrated GPU was never reserved.

For example, this problem occurs in this Alderlake-P (integrated) + DG2
(discrete) topology where the DG2 is found first, but stolen memory is
associated with the integrated GPU:

  - 00:01.0 Bridge
    `- 03:00.0 DG2 discrete GPU
  - 00:02.0 Integrated GPU (with stolen memory)

Remove the QFLAG_APPLY_ONCE flag and call intel_graphics_quirks() for every
Intel GPU.  Reserve stolen memory for the first GPU that appears in
intel_early_ids[].

[bhelgaas: commit log, add code comment, squash in
https://lore.kernel.org/r/20220118190558.2ququ4vdfjuahicm@ldmartin-desk2]
Link: https://lore.kernel.org/r/20220114002843.2083382-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/early-quirks.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -515,6 +515,7 @@ static const struct intel_early_ops gen1
 	.stolen_size = gen9_stolen_size,
 };
 
+/* Intel integrated GPUs for which we need to reserve "stolen memory" */
 static const struct pci_device_id intel_early_ids[] __initconst = {
 	INTEL_I830_IDS(&i830_early_ops),
 	INTEL_I845G_IDS(&i845_early_ops),
@@ -584,6 +585,13 @@ static void __init intel_graphics_quirks
 	u16 device;
 	int i;
 
+	/*
+	 * Reserve "stolen memory" for an integrated GPU.  If we've already
+	 * found one, there's nothing to do for other (discrete) GPUs.
+	 */
+	if (resource_size(&intel_graphics_stolen_res))
+		return;
+
 	device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
 
 	for (i = 0; i < ARRAY_SIZE(intel_early_ids); i++) {
@@ -696,7 +704,7 @@ static struct chipset early_qrk[] __init
 	{ PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST,
 	  PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
 	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID,
-	  QFLAG_APPLY_ONCE, intel_graphics_quirks },
+	  0, intel_graphics_quirks },
 	/*
 	 * HPET on the current version of the Baytrail platform has accuracy
 	 * problems: it will halt in deep idle state - so we disable it.

[PATCH 4.19 030/239] rtc: cmos: take rtc_lock while reading from CMOS

[Greg Kroah-Hartman]

From: Mateusz Jończyk <mat.jonczyk@o2.pl>

commit 454f47ff464325223129b9b5b8d0b61946ec704d upstream.

Reading from the CMOS involves writing to the index register and then
reading from the data register. Therefore access to the CMOS has to be
serialized with rtc_lock. This invocation of CMOS_READ was not
serialized, which could cause trouble when other code is accessing CMOS
at the same time.

Use spin_lock_irq() like the rest of the function.

Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a
separate pair of spin_lock_irq() / spin_unlock_irq() before doing the
math.

Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210200131.153887-2-mat.jonczyk@o2.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-cmos.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -467,7 +467,10 @@ static int cmos_set_alarm(struct device
 	min = t->time.tm_min;
 	sec = t->time.tm_sec;
 
+	spin_lock_irq(&rtc_lock);
 	rtc_control = CMOS_READ(RTC_CONTROL);
+	spin_unlock_irq(&rtc_lock);
+
 	if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
 		/* Writing 0xff means "don't care" or "match all".  */
 		mon = (mon <= 12) ? bin2bcd(mon) : 0xff;

[PATCH 4.19 031/239] media: flexcop-usb: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit cd1798a387825cc4a51282f5a611ad05bb1ad75f upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Note that the driver was multiplying some of the timeout values with HZ
twice resulting in 3000-second timeouts with HZ=1000.

Also note that two of the timeout defines are currently unused.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org      # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/b2c2/flexcop-usb.c |   10 +++++-----
 drivers/media/usb/b2c2/flexcop-usb.h |   12 ++++++------
 2 files changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -86,7 +86,7 @@ static int flexcop_usb_readwrite_dw(stru
 			0,
 			fc_usb->data,
 			sizeof(u32),
-			B2C2_WAIT_FOR_OPERATION_RDW * HZ);
+			B2C2_WAIT_FOR_OPERATION_RDW);
 
 	if (ret != sizeof(u32)) {
 		err("error while %s dword from %d (%d).", read ? "reading" :
@@ -154,7 +154,7 @@ static int flexcop_usb_v8_memory_req(str
 			wIndex,
 			fc_usb->data,
 			buflen,
-			nWaitTime * HZ);
+			nWaitTime);
 	if (ret != buflen)
 		ret = -EIO;
 
@@ -248,13 +248,13 @@ static int flexcop_usb_i2c_req(struct fl
 		/* DKT 020208 - add this to support special case of DiSEqC */
 	case USB_FUNC_I2C_CHECKWRITE:
 		pipe = B2C2_USB_CTRL_PIPE_OUT;
-		nWaitTime = 2;
+		nWaitTime = 2000;
 		request_type |= USB_DIR_OUT;
 		break;
 	case USB_FUNC_I2C_READ:
 	case USB_FUNC_I2C_REPEATREAD:
 		pipe = B2C2_USB_CTRL_PIPE_IN;
-		nWaitTime = 2;
+		nWaitTime = 2000;
 		request_type |= USB_DIR_IN;
 		break;
 	default:
@@ -281,7 +281,7 @@ static int flexcop_usb_i2c_req(struct fl
 			wIndex,
 			fc_usb->data,
 			buflen,
-			nWaitTime * HZ);
+			nWaitTime);
 
 	if (ret != buflen)
 		ret = -EIO;
--- a/drivers/media/usb/b2c2/flexcop-usb.h
+++ b/drivers/media/usb/b2c2/flexcop-usb.h
@@ -91,13 +91,13 @@ typedef enum {
 	UTILITY_SRAM_TESTVERIFY     = 0x16,
 } flexcop_usb_utility_function_t;
 
-#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)
-#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)
+#define B2C2_WAIT_FOR_OPERATION_RW 1000
+#define B2C2_WAIT_FOR_OPERATION_RDW 3000
+#define B2C2_WAIT_FOR_OPERATION_WDW 1000
 
-#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8READ 3000
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3000
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3000
 
 typedef enum {
 	V8_MEMORY_PAGE_DVB_CI = 0x20,

[PATCH 4.19 032/239] media: mceusb: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 16394e998cbb050730536bdf7e89f5a70efbd974 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")
Cc: stable@vger.kernel.org      # 2.6.36
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/rc/mceusb.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1367,7 +1367,7 @@ static void mceusb_gen1_init(struct mceu
 	 */
 	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
 			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
-			      data, USB_CTRL_MSG_SZ, HZ * 3);
+			      data, USB_CTRL_MSG_SZ, 3000);
 	dev_dbg(dev, "set address - ret = %d", ret);
 	dev_dbg(dev, "set address - data[0] = %d, data[1] = %d",
 						data[0], data[1]);
@@ -1375,20 +1375,20 @@ static void mceusb_gen1_init(struct mceu
 	/* set feature: bit rate 38400 bps */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
-			      0xc04e, 0x0000, NULL, 0, HZ * 3);
+			      0xc04e, 0x0000, NULL, 0, 3000);
 
 	dev_dbg(dev, "set feature - ret = %d", ret);
 
 	/* bRequest 4: set char length to 8 bits */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      4, USB_TYPE_VENDOR,
-			      0x0808, 0x0000, NULL, 0, HZ * 3);
+			      0x0808, 0x0000, NULL, 0, 3000);
 	dev_dbg(dev, "set char length - retB = %d", ret);
 
 	/* bRequest 2: set handshaking to use DTR/DSR */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      2, USB_TYPE_VENDOR,
-			      0x0000, 0x0100, NULL, 0, HZ * 3);
+			      0x0000, 0x0100, NULL, 0, 3000);
 	dev_dbg(dev, "set handshake  - retC = %d", ret);
 
 	/* device resume */

[PATCH 4.19 033/239] media: em28xx: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit d9b7e8df3aa9b8c10708aab60e72e79ac08237e4 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: a6c2ba283565 ("[PATCH] v4l: 716: support for em28xx board family")
Cc: stable@vger.kernel.org      # 2.6.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/em28xx/em28xx-core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/usb/em28xx/em28xx-core.c
+++ b/drivers/media/usb/em28xx/em28xx-core.c
@@ -89,7 +89,7 @@ int em28xx_read_reg_req_len(struct em28x
 	mutex_lock(&dev->ctrl_urb_lock);
 	ret = usb_control_msg(udev, pipe, req,
 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, dev->urb_buf, len, HZ);
+			      0x0000, reg, dev->urb_buf, len, 1000);
 	if (ret < 0) {
 		em28xx_regdbg("(pipe 0x%08x): IN:  %02x %02x %02x %02x %02x %02x %02x %02x  failed with error %i\n",
 			      pipe,
@@ -158,7 +158,7 @@ int em28xx_write_regs_req(struct em28xx
 	memcpy(dev->urb_buf, buf, len);
 	ret = usb_control_msg(udev, pipe, req,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, dev->urb_buf, len, HZ);
+			      0x0000, reg, dev->urb_buf, len, 1000);
 	mutex_unlock(&dev->ctrl_urb_lock);
 
 	if (ret < 0) {

[PATCH 4.19 034/239] media: cpia2: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 10729be03327f53258cb196362015ad5c6eabe02 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support")
Cc: stable@vger.kernel.org      # 2.6.17
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/cpia2/cpia2_usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -559,7 +559,7 @@ static int write_packet(struct usb_devic
 			       0,	/* index */
 			       buf,	/* buffer */
 			       size,
-			       HZ);
+			       1000);
 
 	kfree(buf);
 	return ret;
@@ -591,7 +591,7 @@ static int read_packet(struct usb_device
 			       0,	/* index */
 			       buf,	/* buffer */
 			       size,
-			       HZ);
+			       1000);
 
 	if (ret >= 0)
 		memcpy(registers, buf, size);

[PATCH 4.19 035/239] media: s2255: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit f71d272ad4e354097020a4e6b1dc6e4b59feb50f upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Use the common control-message timeout define for the five-second
timeouts.

Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.")
Cc: stable@vger.kernel.org      # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/s2255/s2255drv.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/usb/s2255/s2255drv.c
+++ b/drivers/media/usb/s2255/s2255drv.c
@@ -1904,7 +1904,7 @@ static long s2255_vendor_req(struct s225
 				    USB_TYPE_VENDOR | USB_RECIP_DEVICE |
 				    USB_DIR_IN,
 				    Value, Index, buf,
-				    TransferBufferLength, HZ * 5);
+				    TransferBufferLength, USB_CTRL_SET_TIMEOUT);
 
 		if (r >= 0)
 			memcpy(TransferBuffer, buf, TransferBufferLength);
@@ -1913,7 +1913,7 @@ static long s2255_vendor_req(struct s225
 		r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
 				    Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				    Value, Index, buf,
-				    TransferBufferLength, HZ * 5);
+				    TransferBufferLength, USB_CTRL_SET_TIMEOUT);
 	}
 	kfree(buf);
 	return r;

[PATCH 4.19 036/239] media: dib0700: fix undefined behavior in tuner shutdown

[Greg Kroah-Hartman]

From: Michael Kuron <michael.kuron@gmail.com>

commit f7b77ebe6d2f49c7747b2d619586d1aa33f9ea91 upstream.

This fixes a problem where closing the tuner would leave it in a state
where it would not tune to any channel when reopened. This problem was
discovered as part of https://github.com/hselasky/webcamd/issues/16.

Since adap->id is 0 or 1, this bit-shift overflows, which is undefined
behavior. The driver still worked in practice as the overflow would in
most environments result in 0, which rendered the line a no-op. When
running the driver as part of webcamd however, the overflow could lead
to 0xff due to optimizations by the compiler, which would, in the end,
improperly shut down the tuner.

The bug is a regression introduced in the commit referenced below. The
present patch causes identical behavior to before that commit for
adap->id equal to 0 or 1. The driver does not contain support for
dib0700 devices with more adapters, assuming such even exist.

Tests have been performed with the Xbox One Digital TV Tuner on amd64.
Not all dib0700 devices are expected to be affected by the regression;
this code path is only taken by those with incorrect endpoint numbers.

Link: https://lore.kernel.org/linux-media/1d2fc36d94ced6f67c7cc21dcc469d5e5bdd8201.1632689033.git.mchehab+huawei@kernel.org

Cc: stable@vger.kernel.org
Fixes: 7757ddda6f4f ("[media] DiB0700: add function to change I2C-speed")
Signed-off-by: Michael Kuron <michael.kuron@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/dvb-usb/dib0700_core.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -619,8 +619,6 @@ int dib0700_streaming_ctrl(struct dvb_us
 		deb_info("the endpoint number (%i) is not correct, use the adapter id instead", adap->fe_adap[0].stream.props.endpoint);
 		if (onoff)
 			st->channel_state |=	1 << (adap->id);
-		else
-			st->channel_state |=	1 << ~(adap->id);
 	} else {
 		if (onoff)
 			st->channel_state |=	1 << (adap->fe_adap[0].stream.props.endpoint-2);

[PATCH 4.19 037/239] media: redrat3: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org      # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/rc/redrat3.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -415,7 +415,7 @@ static int redrat3_send_cmd(int cmd, str
 	udev = rr3->udev;
 	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd,
 			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			      0x0000, 0x0000, data, sizeof(u8), HZ * 10);
+			      0x0000, 0x0000, data, sizeof(u8), 10000);
 
 	if (res < 0) {
 		dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d",
@@ -491,7 +491,7 @@ static u32 redrat3_get_timeout(struct re
 	pipe = usb_rcvctrlpipe(rr3->udev, 0);
 	ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM,
 			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			      RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5);
+			      RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, 5000);
 	if (ret != len)
 		dev_warn(rr3->dev, "Failed to read timeout from hardware\n");
 	else {
@@ -521,7 +521,7 @@ static int redrat3_set_timeout(struct rc
 	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RR3_SET_IR_PARAM,
 		     USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
 		     RR3_IR_IO_SIG_TIMEOUT, 0, timeout, sizeof(*timeout),
-		     HZ * 25);
+		     25000);
 	dev_dbg(dev, "set ir parm timeout %d ret 0x%02x\n",
 						be32_to_cpu(*timeout), ret);
 
@@ -553,32 +553,32 @@ static void redrat3_reset(struct redrat3
 	*val = 0x01;
 	rc = usb_control_msg(udev, rxpipe, RR3_RESET,
 			     USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			     RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25);
+			     RR3_CPUCS_REG_ADDR, 0, val, len, 25000);
 	dev_dbg(dev, "reset returned 0x%02x\n", rc);
 
 	*val = length_fuzz;
 	rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
 			     USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
-			     RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25);
+			     RR3_IR_IO_LENGTH_FUZZ, 0, val, len, 25000);
 	dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc);
 
 	*val = (65536 - (minimum_pause * 2000)) / 256;
 	rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
 			     USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
-			     RR3_IR_IO_MIN_PAUSE, 0, val, len, HZ * 25);
+			     RR3_IR_IO_MIN_PAUSE, 0, val, len, 25000);
 	dev_dbg(dev, "set ir parm min pause %d rc 0x%02x\n", *val, rc);
 
 	*val = periods_measure_carrier;
 	rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
 			     USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
-			     RR3_IR_IO_PERIODS_MF, 0, val, len, HZ * 25);
+			     RR3_IR_IO_PERIODS_MF, 0, val, len, 25000);
 	dev_dbg(dev, "set ir parm periods measure carrier %d rc 0x%02x", *val,
 									rc);
 
 	*val = RR3_DRIVER_MAXLENS;
 	rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
 			     USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
-			     RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25);
+			     RR3_IR_IO_MAX_LENGTHS, 0, val, len, 25000);
 	dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc);
 
 	kfree(val);
@@ -596,7 +596,7 @@ static void redrat3_get_firmware_rev(str
 	rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0),
 			     RR3_FW_VERSION,
 			     USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			     0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5);
+			     0, 0, buffer, RR3_FW_VERSION_LEN, 5000);
 
 	if (rc >= 0)
 		dev_info(rr3->dev, "Firmware rev: %s", buffer);
@@ -836,14 +836,14 @@ static int redrat3_transmit_ir(struct rc
 
 	pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress);
 	ret = usb_bulk_msg(rr3->udev, pipe, irdata,
-			    sendbuf_len, &ret_len, 10 * HZ);
+			    sendbuf_len, &ret_len, 10000);
 	dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret);
 
 	/* now tell the hardware to transmit what we sent it */
 	pipe = usb_rcvctrlpipe(rr3->udev, 0);
 	ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL,
 			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			      0, 0, irdata, 2, HZ * 10);
+			      0, 0, irdata, 2, 10000);
 
 	if (ret < 0)
 		dev_err(dev, "Error: control msg send failed, rc %d\n", ret);

[PATCH 4.19 038/239] media: pvrusb2: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit b82bf9b9dc305d7d3d93eab106d70dbf2171b43e upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Cc: stable@vger.kernel.org      # 2.6.18
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -1476,7 +1476,7 @@ static int pvr2_upload_firmware1(struct
 	for (address = 0; address < fwsize; address += 0x800) {
 		memcpy(fw_ptr, fw_entry->data + address, 0x800);
 		ret += usb_control_msg(hdw->usb_dev, pipe, 0xa0, 0x40, address,
-				       0, fw_ptr, 0x800, HZ);
+				       0, fw_ptr, 0x800, 1000);
 	}
 
 	trace_firmware("Upload done, releasing device's CPU");
@@ -1614,7 +1614,7 @@ int pvr2_upload_firmware2(struct pvr2_hd
 			((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]);
 
 		ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr,bcnt,
-				    &actual_length, HZ);
+				    &actual_length, 1000);
 		ret |= (actual_length != bcnt);
 		if (ret) break;
 		fw_done += bcnt;
@@ -3431,7 +3431,7 @@ void pvr2_hdw_cpufw_set_enabled(struct p
 						      0xa0,0xc0,
 						      address,0,
 						      hdw->fw_buffer+address,
-						      0x800,HZ);
+						      0x800,1000);
 				if (ret < 0) break;
 			}
 
@@ -3970,7 +3970,7 @@ void pvr2_hdw_cpureset_assert(struct pvr
 	/* Write the CPUCS register on the 8051.  The lsb of the register
 	   is the reset bit; a 1 asserts reset while a 0 clears it. */
 	pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
-	ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,HZ);
+	ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,1000);
 	if (ret < 0) {
 		pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 			   "cpureset_assert(%d) error=%d",val,ret);

[PATCH 4.19 039/239] media: stk1160: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 6aa6e70cdb5b863a57bad61310bf89b6617a5d2d upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)")
Cc: stable@vger.kernel.org      # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/stk1160/stk1160-core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/usb/stk1160/stk1160-core.c
+++ b/drivers/media/usb/stk1160/stk1160-core.c
@@ -75,7 +75,7 @@ int stk1160_read_reg(struct stk1160 *dev
 		return -ENOMEM;
 	ret = usb_control_msg(dev->udev, pipe, 0x00,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			0x00, reg, buf, sizeof(u8), HZ);
+			0x00, reg, buf, sizeof(u8), 1000);
 	if (ret < 0) {
 		stk1160_err("read failed on reg 0x%x (%d)\n",
 			reg, ret);
@@ -95,7 +95,7 @@ int stk1160_write_reg(struct stk1160 *de
 
 	ret =  usb_control_msg(dev->udev, pipe, 0x01,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value, reg, NULL, 0, HZ);
+			value, reg, NULL, 0, 1000);
 	if (ret < 0) {
 		stk1160_err("write failed on reg 0x%x (%d)\n",
 			reg, ret);

[PATCH 4.19 040/239] can: softing_cs: softingcs_probe(): fix memleak on registration failure

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream.

In case device registration fails during probe, the driver state and
the embedded platform device structure needs to be freed using
platform_device_put() to properly free all resources (e.g. the device
name).

Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card")
Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org
Cc: stable@vger.kernel.org # 2.6.38
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/softing/softing_cs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/can/softing/softing_cs.c
+++ b/drivers/net/can/softing/softing_cs.c
@@ -304,7 +304,7 @@ static int softingcs_probe(struct pcmcia
 	return 0;
 
 platform_failed:
-	kfree(dev);
+	platform_device_put(pdev);
 mem_failed:
 pcmcia_bad:
 pcmcia_failed:

[PATCH 4.19 041/239] lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

commit bc93a22a19eb2b68a16ecf04cdf4b2ed65aaf398 upstream.

On a kernel without CONFIG_STRICT_KERNEL_RWX, running EXEC_RODATA
test leads to "Illegal instruction" failure.

Looking at the content of rodata_objcopy.o, we see that the
function content zeroes only:

	Disassembly of section .rodata:

	0000000000000000 <.lkdtm_rodata_do_nothing>:
	   0:	00 00 00 00 	.long 0x0

Add the contents flag in order to keep the content of the section
while renaming it.

	Disassembly of section .rodata:

	0000000000000000 <.lkdtm_rodata_do_nothing>:
	   0:	4e 80 00 20 	blr

Fixes: e9e08a07385e ("lkdtm: support llvm-objcopy")
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/8900731fbc05fb8b0de18af7133a8fc07c3c53a1.1633712176.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/lkdtm/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/misc/lkdtm/Makefile
+++ b/drivers/misc/lkdtm/Makefile
@@ -13,7 +13,7 @@ KCOV_INSTRUMENT_rodata.o	:= n
 
 OBJCOPYFLAGS :=
 OBJCOPYFLAGS_rodata_objcopy.o	:= \
-			--rename-section .noinstr.text=.rodata,alloc,readonly,load
+			--rename-section .noinstr.text=.rodata,alloc,readonly,load,contents
 targets += rodata.o rodata_objcopy.o
 $(obj)/rodata_objcopy.o: $(obj)/rodata.o FORCE
 	$(call if_changed,objcopy)

[PATCH 4.19 042/239] PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller

[Greg Kroah-Hartman]

From: Yifeng Li <tomli@tomli.me>

commit e445375882883f69018aa669b67cbb37ec873406 upstream.

Like other SATA controller chips in the Marvell 88SE91xx series, the
Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents
it from working under IOMMU.  Add it to the list of devices that need the
quirk.

Without this patch, device initialization fails with DMA errors:

  ata8: softreset failed (1st FIS failed)
  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear

After applying the patch, the controller can be successfully initialized:

  ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
  ata8.00: ATAPI: PIONEER BD-RW   BDR-207M, 1.21, max UDMA/100
  ata8.00: configured for UDMA/100
  scsi 7:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-207M 1.21 PQ: 0 ANSI: 5

Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work
Reported-by: Sam Bingner <sam@bingner.com>
Tested-by: Sam Bingner <sam@bingner.com>
Tested-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4040,6 +4040,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_M
 			 quirk_dma_func1_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
 			 quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c136 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9125,
+			 quirk_dma_func1_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
 			 quirk_dma_func1_alias);
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */

[PATCH 4.19 043/239] shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode

[Greg Kroah-Hartman]

From: Gang Li <ligang.bdlg@bytedance.com>

commit 62c9827cbb996c2c04f615ecd783ce28bcea894b upstream.

Fix a data race in commit 779750d20b93 ("shmem: split huge pages beyond
i_size under memory pressure").

Here are call traces causing race:

   Call Trace 1:
     shmem_unused_huge_shrink+0x3ae/0x410
     ? __list_lru_walk_one.isra.5+0x33/0x160
     super_cache_scan+0x17c/0x190
     shrink_slab.part.55+0x1ef/0x3f0
     shrink_node+0x10e/0x330
     kswapd+0x380/0x740
     kthread+0xfc/0x130
     ? mem_cgroup_shrink_node+0x170/0x170
     ? kthread_create_on_node+0x70/0x70
     ret_from_fork+0x1f/0x30

   Call Trace 2:
     shmem_evict_inode+0xd8/0x190
     evict+0xbe/0x1c0
     do_unlinkat+0x137/0x330
     do_syscall_64+0x76/0x120
     entry_SYSCALL_64_after_hwframe+0x3d/0xa2

A simple explanation:

Image there are 3 items in the local list (@list).  In the first
traversal, A is not deleted from @list.

  1)    A->B->C
        ^
        |
        pos (leave)

In the second traversal, B is deleted from @list.  Concurrently, A is
deleted from @list through shmem_evict_inode() since last reference
counter of inode is dropped by other thread.  Then the @list is corrupted.

  2)    A->B->C
        ^  ^
        |  |
     evict pos (drop)

We should make sure the inode is either on the global list or deleted from
any local list before iput().

Fixed by moving inodes back to global list before we put them.

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/20211125064502.99983-1-ligang.bdlg@bytedance.com
Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure")
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/shmem.c |   37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -451,7 +451,7 @@ static unsigned long shmem_unused_huge_s
 	struct shmem_inode_info *info;
 	struct page *page;
 	unsigned long batch = sc ? sc->nr_to_scan : 128;
-	int removed = 0, split = 0;
+	int split = 0;
 
 	if (list_empty(&sbinfo->shrinklist))
 		return SHRINK_STOP;
@@ -466,7 +466,6 @@ static unsigned long shmem_unused_huge_s
 		/* inode is about to be evicted */
 		if (!inode) {
 			list_del_init(&info->shrinklist);
-			removed++;
 			goto next;
 		}
 
@@ -474,12 +473,12 @@ static unsigned long shmem_unused_huge_s
 		if (round_up(inode->i_size, PAGE_SIZE) ==
 				round_up(inode->i_size, HPAGE_PMD_SIZE)) {
 			list_move(&info->shrinklist, &to_remove);
-			removed++;
 			goto next;
 		}
 
 		list_move(&info->shrinklist, &list);
 next:
+		sbinfo->shrinklist_len--;
 		if (!--batch)
 			break;
 	}
@@ -499,7 +498,7 @@ next:
 		inode = &info->vfs_inode;
 
 		if (nr_to_split && split >= nr_to_split)
-			goto leave;
+			goto move_back;
 
 		page = find_get_page(inode->i_mapping,
 				(inode->i_size & HPAGE_PMD_MASK) >> PAGE_SHIFT);
@@ -513,38 +512,44 @@ next:
 		}
 
 		/*
-		 * Leave the inode on the list if we failed to lock
-		 * the page at this time.
+		 * Move the inode on the list back to shrinklist if we failed
+		 * to lock the page at this time.
 		 *
 		 * Waiting for the lock may lead to deadlock in the
 		 * reclaim path.
 		 */
 		if (!trylock_page(page)) {
 			put_page(page);
-			goto leave;
+			goto move_back;
 		}
 
 		ret = split_huge_page(page);
 		unlock_page(page);
 		put_page(page);
 
-		/* If split failed leave the inode on the list */
+		/* If split failed move the inode on the list back to shrinklist */
 		if (ret)
-			goto leave;
+			goto move_back;
 
 		split++;
 drop:
 		list_del_init(&info->shrinklist);
-		removed++;
-leave:
+		goto put;
+move_back:
+		/*
+		 * Make sure the inode is either on the global list or deleted
+		 * from any local list before iput() since it could be deleted
+		 * in another thread once we put the inode (then the local list
+		 * is corrupted).
+		 */
+		spin_lock(&sbinfo->shrinklist_lock);
+		list_move(&info->shrinklist, &sbinfo->shrinklist);
+		sbinfo->shrinklist_len++;
+		spin_unlock(&sbinfo->shrinklist_lock);
+put:
 		iput(inode);
 	}
 
-	spin_lock(&sbinfo->shrinklist_lock);
-	list_splice_tail(&list, &sbinfo->shrinklist);
-	sbinfo->shrinklist_len -= removed;
-	spin_unlock(&sbinfo->shrinklist_lock);
-
 	return split;
 }
 

[PATCH 4.19 044/239] drm/panel: innolux-p079zca: Delete panel on attach() failure

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit 32a267e9c057e1636e7afdd20599aa5741a73079 ]

If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.

This problem exists since the driver's introduction, but is especially
relevant after refactored for dual-DSI variants.

Fixes: 14c8f2e9f8ea ("drm/panel: add Innolux P079ZCA panel driver")
Fixes: 7ad4e4636c54 ("drm/panel: p079zca: Refactor panel driver to support multiple panels")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-innolux-p079zca.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
index 88c7d035ace66..362ff5555d2e7 100644
--- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c
+++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
@@ -512,6 +512,7 @@ static void innolux_panel_del(struct innolux_panel *innolux)
 static int innolux_panel_probe(struct mipi_dsi_device *dsi)
 {
 	const struct panel_desc *desc;
+	struct innolux_panel *innolux;
 	int err;
 
 	desc = of_device_get_match_data(&dsi->dev);
@@ -523,7 +524,14 @@ static int innolux_panel_probe(struct mipi_dsi_device *dsi)
 	if (err < 0)
 		return err;
 
-	return mipi_dsi_attach(dsi);
+	err = mipi_dsi_attach(dsi);
+	if (err < 0) {
+		innolux = mipi_dsi_get_drvdata(dsi);
+		innolux_panel_del(innolux);
+		return err;
+	}
+
+	return 0;
 }
 
 static int innolux_panel_remove(struct mipi_dsi_device *dsi)
-- 
2.34.1

[PATCH 4.19 045/239] Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() fails

[Greg Kroah-Hartman]

From: Wang Hai <wanghai38@huawei.com>

[ Upstream commit 2a7ca7459d905febf519163bd9e3eed894de6bb7 ]

I got a kernel BUG report when doing fault injection test:

------------[ cut here ]------------
kernel BUG at lib/list_debug.c:45!
...
RIP: 0010:__list_del_entry_valid.cold+0x12/0x4d
...
Call Trace:
 proto_unregister+0x83/0x220
 cmtp_cleanup_sockets+0x37/0x40 [cmtp]
 cmtp_exit+0xe/0x1f [cmtp]
 do_syscall_64+0x35/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

If cmtp_init_sockets() in cmtp_init() fails, cmtp_init() still returns
success. This will cause a kernel bug when accessing uncreated ctmp
related data when the module exits.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/cmtp/core.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/bluetooth/cmtp/core.c b/net/bluetooth/cmtp/core.c
index 9873684a9d8ff..4764ed73f33bf 100644
--- a/net/bluetooth/cmtp/core.c
+++ b/net/bluetooth/cmtp/core.c
@@ -499,9 +499,7 @@ static int __init cmtp_init(void)
 {
 	BT_INFO("CMTP (CAPI Emulation) ver %s", VERSION);
 
-	cmtp_init_sockets();
-
-	return 0;
+	return cmtp_init_sockets();
 }
 
 static void __exit cmtp_exit(void)
-- 
2.34.1

[PATCH 4.19 046/239] clk: bcm-2835: Pick the closest clock rate

[Greg Kroah-Hartman]

From: Maxime Ripard <maxime@cerno.tech>

[ Upstream commit 5517357a4733d7cf7c17fc79d0530cfa47add372 ]

The driver currently tries to pick the closest rate that is lower than
the rate being requested.

This causes an issue with clk_set_min_rate() since it actively checks
for the rounded rate to be above the minimum that was just set.

Let's change the logic a bit to pick the closest rate to the requested
rate, no matter if it's actually higher or lower.

Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/bcm/clk-bcm2835.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index e4fee233849d2..b14aa9ddd9456 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1199,7 +1199,7 @@ static int bcm2835_clock_determine_rate(struct clk_hw *hw,
 		rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate,
 							  &div, &prate,
 							  &avgrate);
-		if (rate > best_rate && rate <= req->rate) {
+		if (abs(req->rate - rate) < abs(req->rate - best_rate)) {
 			best_parent = parent;
 			best_prate = prate;
 			best_rate = rate;
-- 
2.34.1

[PATCH 4.19 047/239] clk: bcm-2835: Remove rounding up the dividers

[Greg Kroah-Hartman]

From: Maxime Ripard <maxime@cerno.tech>

[ Upstream commit 8ca011ef4af48a7af7b15afd8a4a44039dd04cea ]

The driver, once it found a divider, tries to round it up by increasing
the least significant bit of the fractional part by one when the
round_up argument is set and there's a remainder.

However, since it increases the divider it will actually reduce the
clock rate below what we were asking for, leading to issues with
clk_set_min_rate() that will complain that our rounded clock rate is
below the minimum of the rate.

Since the dividers are fairly precise already, let's remove that part so
that we can have clk_set_min_rate() working.

This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round
up ability to the clock divisor").

Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/bcm/clk-bcm2835.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index b14aa9ddd9456..fd78dd5356ed7 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -915,8 +915,7 @@ static int bcm2835_clock_is_on(struct clk_hw *hw)
 
 static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
 				    unsigned long rate,
-				    unsigned long parent_rate,
-				    bool round_up)
+				    unsigned long parent_rate)
 {
 	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
 	const struct bcm2835_clock_data *data = clock->data;
@@ -928,10 +927,6 @@ static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
 
 	rem = do_div(temp, rate);
 	div = temp;
-
-	/* Round up and mask off the unused bits */
-	if (round_up && ((div & unused_frac_mask) != 0 || rem != 0))
-		div += unused_frac_mask + 1;
 	div &= ~unused_frac_mask;
 
 	/* different clamping limits apply for a mash clock */
@@ -1062,7 +1057,7 @@ static int bcm2835_clock_set_rate(struct clk_hw *hw,
 	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
 	struct bcm2835_cprman *cprman = clock->cprman;
 	const struct bcm2835_clock_data *data = clock->data;
-	u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false);
+	u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate);
 	u32 ctl;
 
 	spin_lock(&cprman->regs_lock);
@@ -1113,7 +1108,7 @@ static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw,
 
 	if (!(BIT(parent_idx) & data->set_rate_parent)) {
 		*prate = clk_hw_get_rate(parent);
-		*div = bcm2835_clock_choose_div(hw, rate, *prate, true);
+		*div = bcm2835_clock_choose_div(hw, rate, *prate);
 
 		*avgrate = bcm2835_clock_rate_from_divisor(clock, *prate, *div);
 
-- 
2.34.1

[PATCH 4.19 048/239] wcn36xx: Indicate beacon not connection loss on MISSED_BEACON_IND

[Greg Kroah-Hartman]

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

[ Upstream commit 588b45c88ae130fe373a8c50edaf54735c3f4fe3 ]

Firmware can trigger a missed beacon indication, this is not the same as a
lost signal.

Flag to Linux the missed beacon and let the WiFi stack decide for itself if
the link is up or down by sending its own probe to determine this.

We should only be signalling the link is lost when the firmware indicates

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211027232529.657764-1-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wcn36xx/smd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index e75c1cfd85e63..741a830d9773b 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2311,7 +2311,7 @@ static int wcn36xx_smd_missed_beacon_ind(struct wcn36xx *wcn,
 			wcn36xx_dbg(WCN36XX_DBG_HAL, "beacon missed bss_index %d\n",
 				    tmp->bss_index);
 			vif = wcn36xx_priv_to_vif(tmp);
-			ieee80211_connection_loss(vif);
+			ieee80211_beacon_loss(vif);
 		}
 		return 0;
 	}
@@ -2326,7 +2326,7 @@ static int wcn36xx_smd_missed_beacon_ind(struct wcn36xx *wcn,
 			wcn36xx_dbg(WCN36XX_DBG_HAL, "beacon missed bss_index %d\n",
 				    rsp->bss_index);
 			vif = wcn36xx_priv_to_vif(tmp);
-			ieee80211_connection_loss(vif);
+			ieee80211_beacon_loss(vif);
 			return 0;
 		}
 	}
-- 
2.34.1

[PATCH 4.19 049/239] wcn36xx: Release DMA channel descriptor allocations

[Greg Kroah-Hartman]

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

[ Upstream commit 3652096e5263ad67604b0323f71d133485f410e5 ]

When unloading the driver we are not releasing the DMA descriptors which we
previously allocated.

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211105122152.1580542-3-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wcn36xx/dxe.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index 657525988d1ee..38eef1579db2d 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -954,4 +954,9 @@ void wcn36xx_dxe_deinit(struct wcn36xx *wcn)
 
 	wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_l_ch);
 	wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_h_ch);
+
+	wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_tx_l_ch);
+	wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_tx_h_ch);
+	wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_rx_l_ch);
+	wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_rx_h_ch);
 }
-- 
2.34.1

[PATCH 4.19 050/239] media: videobuf2: Fix the size printk format

[Greg Kroah-Hartman]

From: Dillon Min <dillon.minfei@gmail.com>

[ Upstream commit c9ee220d76775e42f35d634479c978d9350077d3 ]

Since the type of parameter size is unsigned long,
it should printk by %lu, instead of %ld, fix it.

Fixes: 7952be9b6ece ("media: drivers/media/common/videobuf2: rename from videobuf")
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/videobuf2/videobuf2-dma-contig.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
index aff0ab7bf83d5..bbd5716d4c9cb 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
@@ -154,7 +154,7 @@ static void *vb2_dc_alloc(struct device *dev, unsigned long attrs,
 	buf->cookie = dma_alloc_attrs(dev, size, &buf->dma_addr,
 					GFP_KERNEL | gfp_flags, buf->attrs);
 	if (!buf->cookie) {
-		dev_err(dev, "dma_alloc_coherent of size %ld failed\n", size);
+		dev_err(dev, "dma_alloc_coherent of size %lu failed\n", size);
 		kfree(buf);
 		return ERR_PTR(-ENOMEM);
 	}
@@ -206,9 +206,9 @@ static int vb2_dc_mmap(void *buf_priv, struct vm_area_struct *vma)
 
 	vma->vm_ops->open(vma);
 
-	pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %ld\n",
-		__func__, (unsigned long)buf->dma_addr, vma->vm_start,
-		buf->size);
+	pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %lu\n",
+		 __func__, (unsigned long)buf->dma_addr, vma->vm_start,
+		 buf->size);
 
 	return 0;
 }
-- 
2.34.1

[PATCH 4.19 051/239] media: em28xx: fix memory leak in em28xx_init_dev

[Greg Kroah-Hartman]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit 22be5a10d0b24eec9e45decd15d7e6112b25f080 ]

In the em28xx_init_rev, if em28xx_audio_setup fails, this function fails
to deallocate the media_dev allocated in the em28xx_media_device_init.

Fix this by adding em28xx_unregister_media_device to free media_dev.

BTW, this patch is tested in my local syzkaller instance, and it can
prevent the memory leak from occurring again.

CC: Pavel Skripkin <paskripkin@gmail.com>
Fixes: 37ecc7b1278f ("[media] em28xx: add media controller support")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/em28xx/em28xx-cards.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index ec608f60d2c75..06da08f8efdb1 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -3515,8 +3515,10 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 
 	if (dev->is_audio_only) {
 		retval = em28xx_audio_setup(dev);
-		if (retval)
-			return -ENODEV;
+		if (retval) {
+			retval = -ENODEV;
+			goto err_deinit_media;
+		}
 		em28xx_init_extension(dev);
 
 		return 0;
@@ -3535,7 +3537,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 		dev_err(&dev->intf->dev,
 			"%s: em28xx_i2c_register bus 0 - error [%d]!\n",
 		       __func__, retval);
-		return retval;
+		goto err_deinit_media;
 	}
 
 	/* register i2c bus 1 */
@@ -3551,9 +3553,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 				"%s: em28xx_i2c_register bus 1 - error [%d]!\n",
 				__func__, retval);
 
-			em28xx_i2c_unregister(dev, 0);
-
-			return retval;
+			goto err_unreg_i2c;
 		}
 	}
 
@@ -3561,6 +3561,12 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 	em28xx_card_setup(dev);
 
 	return 0;
+
+err_unreg_i2c:
+	em28xx_i2c_unregister(dev, 0);
+err_deinit_media:
+	em28xx_unregister_media_device(dev);
+	return retval;
 }
 
 static int em28xx_duplicate_dev(struct em28xx *dev)
-- 
2.34.1

[PATCH 4.19 052/239] arm64: dts: meson-gxbb-wetek: fix missing GPIO binding

[Greg Kroah-Hartman]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit c019abb2feba3cbbd7cf7178f8e6499c4fa6fced ]

The absence of this binding appears to be harmless in Linux but it breaks
Ethernet support in mainline u-boot. So add the binding (which is present
in all other u-boot supported GXBB device-trees).

Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211012052522.30873-3-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 70325b273bd2b..c7f06692d6c2a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
-- 
2.34.1

[PATCH 4.19 053/239] Bluetooth: stop proccessing malicious adv data

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 3a56ef719f0b9682afb8a86d64b2399e36faa4e6 ]

Syzbot reported slab-out-of-bounds read in hci_le_adv_report_evt(). The
problem was in missing validaion check.

We should check if data is not malicious and we can read next data block.
If we won't check ptr validness, code can read a way beyond skb->end and
it can cause problems, of course.

Fixes: e95beb414168 ("Bluetooth: hci_le_adv_report_evt code refactoring")
Reported-and-tested-by: syzbot+e3fcb9c4f3c2a931dc40@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 937cada5595ee..c0dbb8ad00376 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5391,7 +5391,8 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
 		struct hci_ev_le_advertising_info *ev = ptr;
 		s8 rssi;
 
-		if (ev->length <= HCI_MAX_AD_LENGTH) {
+		if (ev->length <= HCI_MAX_AD_LENGTH &&
+		    ev->data + ev->length <= skb_tail_pointer(skb)) {
 			rssi = ev->data[ev->length];
 			process_adv_report(hdev, ev->evt_type, &ev->bdaddr,
 					   ev->bdaddr_type, NULL, 0, rssi,
@@ -5401,6 +5402,11 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
 		}
 
 		ptr += sizeof(*ev) + ev->length + 1;
+
+		if (ptr > (void *) skb_tail_pointer(skb) - sizeof(*ev)) {
+			bt_dev_err(hdev, "Malicious advertising data. Stopping processing");
+			break;
+		}
 	}
 
 	hci_dev_unlock(hdev);
-- 
2.34.1

[PATCH 4.19 054/239] tee: fix put order in teedev_close_context()

[Greg Kroah-Hartman]

From: Jens Wiklander <jens.wiklander@linaro.org>

[ Upstream commit f18397ab3ae23e8e43bba9986e66af6d4497f2ad ]

Prior to this patch was teedev_close_context() calling tee_device_put()
before teedev_ctx_put() leading to teedev_ctx_release() accessing
ctx->teedev just after the reference counter was decreased on the
teedev. Fix this by calling teedev_ctx_put() before tee_device_put().

Fixes: 217e0250cccb ("tee: use reference counting for tee_context")
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tee/tee_core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
index dd46b758852aa..d42fc2ae8592e 100644
--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -96,8 +96,10 @@ void teedev_ctx_put(struct tee_context *ctx)
 
 static void teedev_close_context(struct tee_context *ctx)
 {
-	tee_device_put(ctx->teedev);
+	struct tee_device *teedev = ctx->teedev;
+
 	teedev_ctx_put(ctx);
+	tee_device_put(teedev);
 }
 
 static int tee_release(struct inode *inode, struct file *filp)
-- 
2.34.1

[PATCH 4.19 055/239] media: dmxdev: fix UAF when dvb_register_device() fails

[Greg Kroah-Hartman]

From: Wang Hai <wanghai38@huawei.com>

[ Upstream commit ab599eb11882f834951c436cc080c3455ba32b9b ]

I got a use-after-free report:

dvbdev: dvb_register_device: failed to create device dvb1.dvr0 (-12)
...
==================================================================
BUG: KASAN: use-after-free in dvb_dmxdev_release+0xce/0x2f0
...
Call Trace:
 dump_stack_lvl+0x6c/0x8b
 print_address_description.constprop.0+0x48/0x70
 kasan_report.cold+0x82/0xdb
 __asan_load4+0x6b/0x90
 dvb_dmxdev_release+0xce/0x2f0
...
Allocated by task 7666:
 kasan_save_stack+0x23/0x50
 __kasan_kmalloc+0x83/0xa0
 kmem_cache_alloc_trace+0x22e/0x470
 dvb_register_device+0x12f/0x980
 dvb_dmxdev_init+0x1f3/0x230
...
Freed by task 7666:
 kasan_save_stack+0x23/0x50
 kasan_set_track+0x20/0x30
 kasan_set_free_info+0x24/0x40
 __kasan_slab_free+0xf2/0x130
 kfree+0xd1/0x5c0
 dvb_register_device.cold+0x1ac/0x1fa
 dvb_dmxdev_init+0x1f3/0x230
...

When dvb_register_device() in dvb_dmxdev_init() fails, dvb_dmxdev_init()
does not return a failure, and the memory pointed to by dvbdev or
dvr_dvbdev is invalid at this point. If they are used subsequently, it
will result in UFA or null-ptr-deref.

If dvb_register_device() in dvb_dmxdev_init() fails, fix the bug by making
dvb_dmxdev_init() return an error as well.

Link: https://lore.kernel.org/linux-media/20211015085741.1203283-1-wanghai38@huawei.com

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dmxdev.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/media/dvb-core/dmxdev.c b/drivers/media/dvb-core/dmxdev.c
index d548f98c7a67d..9e0ef3934fa3d 100644
--- a/drivers/media/dvb-core/dmxdev.c
+++ b/drivers/media/dvb-core/dmxdev.c
@@ -1412,7 +1412,7 @@ static const struct dvb_device dvbdev_dvr = {
 };
 int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter)
 {
-	int i;
+	int i, ret;
 
 	if (dmxdev->demux->open(dmxdev->demux) < 0)
 		return -EUSERS;
@@ -1431,14 +1431,26 @@ int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter)
 					    DMXDEV_STATE_FREE);
 	}
 
-	dvb_register_device(dvb_adapter, &dmxdev->dvbdev, &dvbdev_demux, dmxdev,
+	ret = dvb_register_device(dvb_adapter, &dmxdev->dvbdev, &dvbdev_demux, dmxdev,
 			    DVB_DEVICE_DEMUX, dmxdev->filternum);
-	dvb_register_device(dvb_adapter, &dmxdev->dvr_dvbdev, &dvbdev_dvr,
+	if (ret < 0)
+		goto err_register_dvbdev;
+
+	ret = dvb_register_device(dvb_adapter, &dmxdev->dvr_dvbdev, &dvbdev_dvr,
 			    dmxdev, DVB_DEVICE_DVR, dmxdev->filternum);
+	if (ret < 0)
+		goto err_register_dvr_dvbdev;
 
 	dvb_ringbuffer_init(&dmxdev->dvr_buffer, NULL, 8192);
 
 	return 0;
+
+err_register_dvr_dvbdev:
+	dvb_unregister_device(dmxdev->dvbdev);
+err_register_dvbdev:
+	vfree(dmxdev->filter);
+	dmxdev->filter = NULL;
+	return ret;
 }
 
 EXPORT_SYMBOL(dvb_dmxdev_init);
-- 
2.34.1

[PATCH 4.19 056/239] crypto: qce - fix uaf on qce_ahash_register_one

[Greg Kroah-Hartman]

From: Chengfeng Ye <cyeaa@connect.ust.hk>

[ Upstream commit b4cb4d31631912842eb7dce02b4350cbb7562d5e ]

Pointer base points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing base before free tmpl.

Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/qce/sha.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/qce/sha.c b/drivers/crypto/qce/sha.c
index d8a5db11b7ea1..bffd4d15145d9 100644
--- a/drivers/crypto/qce/sha.c
+++ b/drivers/crypto/qce/sha.c
@@ -521,8 +521,8 @@ static int qce_ahash_register_one(const struct qce_ahash_def *def,
 
 	ret = crypto_register_ahash(alg);
 	if (ret) {
-		kfree(tmpl);
 		dev_err(qce->dev, "%s registration failed\n", base->cra_name);
+		kfree(tmpl);
 		return ret;
 	}
 
-- 
2.34.1

[PATCH 4.19 057/239] tty: serial: atmel: Check return code of dmaengine_submit()

[Greg Kroah-Hartman]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

[ Upstream commit 1e67bd2b8cb90b66e89562598e9c2046246832d3 ]

The tx_submit() method of struct dma_async_tx_descriptor is entitled
to do sanity checks and return errors if encountered. It's not the
case for the DMA controller drivers that this client is using
(at_h/xdmac), because they currently don't do sanity checks and always
return a positive cookie at tx_submit() method. In case the controller
drivers will implement sanity checks and return errors, print a message
so that the client will be informed that something went wrong at
tx_submit() level.

Fixes: 08f738be88bb ("serial: at91: add tx dma support")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Link: https://lore.kernel.org/r/20211125090028.786832-3-tudor.ambarus@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/atmel_serial.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 936d401f20b95..f6287d76b2984 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -918,6 +918,11 @@ static void atmel_tx_dma(struct uart_port *port)
 		desc->callback = atmel_complete_tx_dma;
 		desc->callback_param = atmel_port;
 		atmel_port->cookie_tx = dmaengine_submit(desc);
+		if (dma_submit_error(atmel_port->cookie_tx)) {
+			dev_err(port->dev, "dma_submit_error %d\n",
+				atmel_port->cookie_tx);
+			return;
+		}
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1176,6 +1181,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	desc->callback_param = port;
 	atmel_port->desc_rx = desc;
 	atmel_port->cookie_rx = dmaengine_submit(desc);
+	if (dma_submit_error(atmel_port->cookie_rx)) {
+		dev_err(port->dev, "dma_submit_error %d\n",
+			atmel_port->cookie_rx);
+		goto chan_err;
+	}
 
 	return 0;
 
-- 
2.34.1

[PATCH 4.19 058/239] tty: serial: atmel: Call dma_async_issue_pending()

[Greg Kroah-Hartman]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

[ Upstream commit 4f4b9b5895614eb2e2b5f4cab7858f44bd113e1b ]

The driver wrongly assummed that tx_submit() will start the transfer,
which is not the case, now that the at_xdmac driver is fixed. tx_submit
is supposed to push the current transaction descriptor to a pending queue,
waiting for issue_pending to be called. issue_pending must start the
transfer, not tx_submit.

Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
Fixes: 08f738be88bb ("serial: at91: add tx dma support")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211125090028.786832-4-tudor.ambarus@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/atmel_serial.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index f6287d76b2984..3ba9ed36d6362 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -923,6 +923,8 @@ static void atmel_tx_dma(struct uart_port *port)
 				atmel_port->cookie_tx);
 			return;
 		}
+
+		dma_async_issue_pending(chan);
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1187,6 +1189,8 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 		goto chan_err;
 	}
 
+	dma_async_issue_pending(atmel_port->chan_rx);
+
 	return 0;
 
 chan_err:
-- 
2.34.1

[PATCH 4.19 059/239] media: rcar-csi2: Correct the selection of hsfreqrange

[Greg Kroah-Hartman]

From: Suresh Udipi <sudipi@jp.adit-jv.com>

[ Upstream commit cee44d4fbacbbdfe62697ec94e76c6e4f726c5df ]

hsfreqrange should be chosen based on the calculated mbps which
is closer to the default bit rate  and within the range as per
table[1]. But current calculation always selects first value which
is greater than or equal to the calculated mbps which may lead
to chosing a wrong range in some cases.

For example for 360 mbps for H3/M3N
Existing logic selects
Calculated value 360Mbps : Default 400Mbps Range [368.125 -433.125 mbps]

This hsfreqrange is out of range.

The logic is changed to get the default value which is closest to the
calculated value [1]

Calculated value 360Mbps : Default 350Mbps  Range [320.625 -380.625 mpbs]

[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.9]

Please note that According to Renesas in Table 25.9 the range for
220 default value is corrected as below

 |Range (Mbps)     |  Default  Bit rate (Mbps) |
 -----------------------------------------------
 | 197.125-244.125 |     220                   |
 -----------------------------------------------

Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Kazuyoshi Akiyama <akiyama@nds-osk.co.jp>
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rcar-vin/rcar-csi2.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 23f55514b002a..bdcddc48e2f08 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -416,16 +416,23 @@ static int rcsi2_wait_phy_start(struct rcar_csi2 *priv)
 static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
 {
 	const struct rcsi2_mbps_reg *hsfreq;
+	const struct rcsi2_mbps_reg *hsfreq_prev = NULL;
 
-	for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++)
+	for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++) {
 		if (hsfreq->mbps >= mbps)
 			break;
+		hsfreq_prev = hsfreq;
+	}
 
 	if (!hsfreq->mbps) {
 		dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps);
 		return -ERANGE;
 	}
 
+	if (hsfreq_prev &&
+	    ((mbps - hsfreq_prev->mbps) <= (hsfreq->mbps - mbps)))
+		hsfreq = hsfreq_prev;
+
 	rcsi2_write(priv, PHYPLL_REG, PHYPLL_HSFREQRANGE(hsfreq->reg));
 
 	return 0;
-- 
2.34.1

[PATCH 4.19 060/239] media: si470x-i2c: fix possible memory leak in si470x_i2c_probe()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit ef054e345ed8c79ce1121a3599b5a2dfd78e57a0 ]

n the 'radio->hdl.error' error handling, ctrl handler allocated by
v4l2_ctrl_new_std() does not released, and caused memory leak as
follows:

unreferenced object 0xffff888033d54200 (size 256):
  comm "i2c-si470x-19", pid 909, jiffies 4294914203 (age 8.072s)
  hex dump (first 32 bytes):
    e8 69 11 03 80 88 ff ff 00 46 d5 33 80 88 ff ff  .i.......F.3....
    10 42 d5 33 80 88 ff ff 10 42 d5 33 80 88 ff ff  .B.3.....B.3....
  backtrace:
    [<00000000086bd4ed>] __kmalloc_node+0x1eb/0x360
    [<00000000bdb68871>] kvmalloc_node+0x66/0x120
    [<00000000fac74e4c>] v4l2_ctrl_new+0x7b9/0x1c60 [videodev]
    [<00000000693bf940>] v4l2_ctrl_new_std+0x19b/0x270 [videodev]
    [<00000000c0cb91bc>] si470x_i2c_probe+0x2d3/0x9a0 [radio_si470x_i2c]
    [<0000000056a6f01f>] i2c_device_probe+0x4d8/0xbe0

Fix the error handling path to avoid memory leak.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 8c081b6f9a9b ("media: radio: Critical v4l2 registration...")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/radio/si470x/radio-si470x-i2c.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index cc68bdac0c367..7c49eaee67f36 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -381,7 +381,7 @@ static int si470x_i2c_probe(struct i2c_client *client,
 	if (radio->hdl.error) {
 		retval = radio->hdl.error;
 		dev_err(&client->dev, "couldn't register control\n");
-		goto err_dev;
+		goto err_all;
 	}
 
 	/* video device initialization */
@@ -465,7 +465,6 @@ err_rds:
 	kfree(radio->buffer);
 err_ctrl:
 	v4l2_ctrl_handler_free(&radio->hdl);
-err_dev:
 	v4l2_device_unregister(&radio->v4l2_dev);
 err_radio:
 	kfree(radio);
-- 
2.34.1

[PATCH 4.19 061/239] media: mtk-vcodec: call v4l2_m2m_ctx_release first when file is released

[Greg Kroah-Hartman]

From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>

[ Upstream commit 9f89c881bffbdffe4060ffaef3489a2830a6dd9c ]

The func v4l2_m2m_ctx_release waits for currently running jobs
to finish and then stop streaming both queues and frees the buffers.
All this should be done before the call to mtk_vcodec_enc_release
which frees the encoder handler. This fixes null-pointer dereference bug:

[  638.028076] Mem abort info:
[  638.030932]   ESR = 0x96000004
[  638.033978]   EC = 0x25: DABT (current EL), IL = 32 bits
[  638.039293]   SET = 0, FnV = 0
[  638.042338]   EA = 0, S1PTW = 0
[  638.045474]   FSC = 0x04: level 0 translation fault
[  638.050349] Data abort info:
[  638.053224]   ISV = 0, ISS = 0x00000004
[  638.057055]   CM = 0, WnR = 0
[  638.060018] user pgtable: 4k pages, 48-bit VAs, pgdp=000000012b6db000
[  638.066485] [00000000000001a0] pgd=0000000000000000, p4d=0000000000000000
[  638.073277] Internal error: Oops: 96000004 [#1] SMP
[  638.078145] Modules linked in: rfkill mtk_vcodec_dec mtk_vcodec_enc uvcvideo mtk_mdp mtk_vcodec_common videobuf2_dma_contig v4l2_h264 cdc_ether v4l2_mem2mem videobuf2_vmalloc usbnet videobuf2_memops videobuf2_v4l2 r8152 videobuf2_common videodev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf elan_i2c elants_i2c sbs_battery mc cros_usbpd_charger cros_ec_chardev cros_usbpd_logger crct10dif_ce mtk_vpu fuse ip_tables x_tables ipv6
[  638.118583] CPU: 0 PID: 212 Comm: kworker/u8:5 Not tainted 5.15.0-06427-g58a1d4dcfc74-dirty #109
[  638.127357] Hardware name: Google Elm (DT)
[  638.131444] Workqueue: mtk-vcodec-enc mtk_venc_worker [mtk_vcodec_enc]
[  638.137974] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  638.144925] pc : vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc]
[  638.150493] lr : venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc]
[  638.156060] sp : ffff8000124d3c40
[  638.159364] x29: ffff8000124d3c40 x28: 0000000000000000 x27: 0000000000000000
[  638.166493] x26: 0000000000000000 x25: ffff0000e7f252d0 x24: ffff8000124d3d58
[  638.173621] x23: ffff8000124d3d58 x22: ffff8000124d3d60 x21: 0000000000000001
[  638.180750] x20: ffff80001137e000 x19: 0000000000000000 x18: 0000000000000001
[  638.187878] x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000000
[  638.195006] x14: ffff8000118536c0 x13: ffff8000ee1da000 x12: 0000000030d4d91d
[  638.202134] x11: 0000000000000000 x10: 0000000000000980 x9 : ffff8000124d3b20
[  638.209262] x8 : ffff0000c18d4ea0 x7 : ffff0000c18d44c0 x6 : ffff0000c18d44c0
[  638.216391] x5 : ffff80000904a3b0 x4 : ffff8000124d3d58 x3 : ffff8000124d3d60
[  638.223519] x2 : ffff8000124d3d78 x1 : 0000000000000001 x0 : ffff80001137efb8
[  638.230648] Call trace:
[  638.233084]  vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc]
[  638.238304]  venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc]
[  638.243525]  mtk_venc_worker+0x110/0x250 [mtk_vcodec_enc]
[  638.248918]  process_one_work+0x1f8/0x498
[  638.252923]  worker_thread+0x140/0x538
[  638.256664]  kthread+0x148/0x158
[  638.259884]  ret_from_fork+0x10/0x20
[  638.263455] Code: f90023f9 2a0103f5 aa0303f6 aa0403f8 (f940d277)
[  638.269538] ---[ end trace e374fc10f8e181f5 ]---

[gst-master] root@debian:~/gst-build# [  638.019193] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a0
Fixes: 4e855a6efa547 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
index 83f859e8509c9..b95006a864c26 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
@@ -217,11 +217,11 @@ static int fops_vcodec_release(struct file *file)
 	mtk_v4l2_debug(1, "[%d] encoder", ctx->id);
 	mutex_lock(&dev->dev_mutex);
 
+	v4l2_m2m_ctx_release(ctx->m2m_ctx);
 	mtk_vcodec_enc_release(ctx);
 	v4l2_fh_del(&ctx->fh);
 	v4l2_fh_exit(&ctx->fh);
 	v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
-	v4l2_m2m_ctx_release(ctx->m2m_ctx);
 
 	list_del_init(&ctx->list);
 	kfree(ctx);
-- 
2.34.1

[PATCH 4.19 062/239] netfilter: bridge: add support for pppoe filtering

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 28b78ecffea8078d81466b2e01bb5a154509f1ba ]

This makes 'bridge-nf-filter-pppoe-tagged' sysctl work for
bridged traffic.

Looking at the original commit it doesn't appear this ever worked:

 static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff **pskb,
[..]
        if (skb->protocol == htons(ETH_P_8021Q)) {
                skb_pull(skb, VLAN_HLEN);
                skb->network_header += VLAN_HLEN;
+       } else if (skb->protocol == htons(ETH_P_PPP_SES)) {
+               skb_pull(skb, PPPOE_SES_HLEN);
+               skb->network_header += PPPOE_SES_HLEN;
        }
 [..]
	NF_HOOK(... POST_ROUTING, ...)

... but the adjusted offsets are never restored.

The alternative would be to rip this code out for good,
but otoh we'd have to keep this anyway for the vlan handling
(which works because vlan tag info is in the skb, not the packet
 payload).

Reported-and-tested-by: Amish Chana <amish@3g.co.za>
Fixes: 516299d2f5b6f97 ("[NETFILTER]: bridge-nf: filter bridged IPv4/IPv6 encapsulated in pppoe traffic")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_netfilter_hooks.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index c5380c6baf2e7..4b9d1d6bbf6f9 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -727,6 +727,9 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff
 	if (nf_bridge->frag_max_size && nf_bridge->frag_max_size < mtu)
 		mtu = nf_bridge->frag_max_size;
 
+	nf_bridge_update_protocol(skb);
+	nf_bridge_push_encap_header(skb);
+
 	if (skb_is_gso(skb) || skb->len + mtu_reserved <= mtu) {
 		nf_bridge_info_free(skb);
 		return br_dev_queue_push_xmit(net, sk, skb);
@@ -744,8 +747,6 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff
 
 		IPCB(skb)->frag_max_size = nf_bridge->frag_max_size;
 
-		nf_bridge_update_protocol(skb);
-
 		data = this_cpu_ptr(&brnf_frag_data_storage);
 
 		data->vlan_tci = skb->vlan_tci;
@@ -768,8 +769,6 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff
 
 		IP6CB(skb)->frag_max_size = nf_bridge->frag_max_size;
 
-		nf_bridge_update_protocol(skb);
-
 		data = this_cpu_ptr(&brnf_frag_data_storage);
 		data->encap_size = nf_bridge_encap_header_len(skb);
 		data->size = ETH_HLEN + data->encap_size;
-- 
2.34.1

[PATCH 4.19 063/239] arm64: dts: qcom: msm8916: fix MMC controller aliases

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit b0293c19d42f6d6951c2fab9a47fed50baf2c14d ]

Change sdhcN aliases to mmcN to make them actually work. Currently the
board uses non-standard aliases sdhcN, which do not work, resulting in
mmc0 and mmc1 hosts randomly changing indices between boots.

Fixes: c4da5a561627 ("arm64: dts: qcom: Add msm8916 sdhci configuration nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201020559.1611890-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index ba42c62399226..078ae020a77b8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -27,8 +27,8 @@
 	#size-cells = <2>;
 
 	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
 	};
 
 	chosen { };
-- 
2.34.1

[PATCH 4.19 064/239] drm/amdgpu: Fix a NULL pointer dereference in amdgpu_connector_lcd_native_mode()

[Greg Kroah-Hartman]

From: Zhou Qingyang <zhou1615@umn.edu>

[ Upstream commit b220110e4cd442156f36e1d9b4914bb9e87b0d00 ]

In amdgpu_connector_lcd_native_mode(), the return value of
drm_mode_duplicate() is assigned to mode, and there is a dereference
of it in amdgpu_connector_lcd_native_mode(), which will lead to a NULL
pointer dereference on failure of drm_mode_duplicate().

Fix this bug add a check of mode.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_DRM_AMDGPU=m show no new warnings, and
our static analyzer no longer warns about this code.

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
index e1be3fd4d7a45..3e4305c3c9831 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
@@ -388,6 +388,9 @@ amdgpu_connector_lcd_native_mode(struct drm_encoder *encoder)
 	    native_mode->vdisplay != 0 &&
 	    native_mode->clock != 0) {
 		mode = drm_mode_duplicate(dev, native_mode);
+		if (!mode)
+			return NULL;
+
 		mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
 		drm_mode_set_name(mode);
 
@@ -402,6 +405,9 @@ amdgpu_connector_lcd_native_mode(struct drm_encoder *encoder)
 		 * simpler.
 		 */
 		mode = drm_cvt_mode(dev, native_mode->hdisplay, native_mode->vdisplay, 60, true, false, false);
+		if (!mode)
+			return NULL;
+
 		mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
 		DRM_DEBUG_KMS("Adding cvt approximation of native panel mode %s\n", mode->name);
 	}
-- 
2.34.1

[PATCH 4.19 065/239] drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()

[Greg Kroah-Hartman]

From: Zhou Qingyang <zhou1615@umn.edu>

[ Upstream commit ab50cb9df8896b39aae65c537a30de2c79c19735 ]

In radeon_driver_open_kms(), radeon_vm_bo_add() is assigned to
vm->ib_bo_va and passes and used in radeon_vm_bo_set_addr(). In
radeon_vm_bo_set_addr(), there is a dereference of vm->ib_bo_va,
which could lead to a NULL pointer dereference on failure of
radeon_vm_bo_add().

Fix this bug by adding a check of vm->ib_bo_va.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_DRM_RADEON=m show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: cc9e67e3d700 ("drm/radeon: fix VM IB handling")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_kms.c | 36 ++++++++++++++++-------------
 1 file changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 3f75b4be7fa4a..b60365d3a432a 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -623,6 +623,8 @@ void radeon_driver_lastclose_kms(struct drm_device *dev)
 int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 {
 	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_fpriv *fpriv;
+	struct radeon_vm *vm;
 	int r;
 
 	file_priv->driver_priv = NULL;
@@ -635,8 +637,6 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 
 	/* new gpu have virtual address space support */
 	if (rdev->family >= CHIP_CAYMAN) {
-		struct radeon_fpriv *fpriv;
-		struct radeon_vm *vm;
 
 		fpriv = kzalloc(sizeof(*fpriv), GFP_KERNEL);
 		if (unlikely(!fpriv)) {
@@ -647,35 +647,39 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 		if (rdev->accel_working) {
 			vm = &fpriv->vm;
 			r = radeon_vm_init(rdev, vm);
-			if (r) {
-				kfree(fpriv);
-				goto out_suspend;
-			}
+			if (r)
+				goto out_fpriv;
 
 			r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false);
-			if (r) {
-				radeon_vm_fini(rdev, vm);
-				kfree(fpriv);
-				goto out_suspend;
-			}
+			if (r)
+				goto out_vm_fini;
 
 			/* map the ib pool buffer read only into
 			 * virtual address space */
 			vm->ib_bo_va = radeon_vm_bo_add(rdev, vm,
 							rdev->ring_tmp_bo.bo);
+			if (!vm->ib_bo_va) {
+				r = -ENOMEM;
+				goto out_vm_fini;
+			}
+
 			r = radeon_vm_bo_set_addr(rdev, vm->ib_bo_va,
 						  RADEON_VA_IB_OFFSET,
 						  RADEON_VM_PAGE_READABLE |
 						  RADEON_VM_PAGE_SNOOPED);
-			if (r) {
-				radeon_vm_fini(rdev, vm);
-				kfree(fpriv);
-				goto out_suspend;
-			}
+			if (r)
+				goto out_vm_fini;
 		}
 		file_priv->driver_priv = fpriv;
 	}
 
+	if (!r)
+		goto out_suspend;
+
+out_vm_fini:
+	radeon_vm_fini(rdev, vm);
+out_fpriv:
+	kfree(fpriv);
 out_suspend:
 	pm_runtime_mark_last_busy(dev->dev);
 	pm_runtime_put_autosuspend(dev->dev);
-- 
2.34.1

[PATCH 4.19 066/239] tty: serial: uartlite: allow 64 bit address

[Greg Kroah-Hartman]

From: Lizhi Hou <lizhi.hou@xilinx.com>

[ Upstream commit 3672fb65155530b5eea6225685c75329b6debec3 ]

The base address of uartlite registers could be 64 bit address which is from
device resource. When ulite_probe() calls ulite_assign(), this 64 bit
address is casted to 32-bit. The fix is to replace "u32" type with
"phys_addr_t" type for the base address in ulite_assign() argument list.

Fixes: 8fa7b6100693 ("[POWERPC] Uartlite: Separate the bus binding from the driver proper")
Signed-off-by: Lizhi Hou <lizhi.hou@xilinx.com>
Link: https://lore.kernel.org/r/20211129202302.1319033-1-lizhi.hou@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/uartlite.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 8df3058226687..5d1b7455e627d 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -618,7 +618,7 @@ static struct uart_driver ulite_uart_driver = {
  *
  * Returns: 0 on success, <0 otherwise
  */
-static int ulite_assign(struct device *dev, int id, u32 base, int irq,
+static int ulite_assign(struct device *dev, int id, phys_addr_t base, int irq,
 			struct uartlite_data *pdata)
 {
 	struct uart_port *port;
-- 
2.34.1

[PATCH 4.19 067/239] serial: amba-pl011: do not request memory region twice

[Greg Kroah-Hartman]

From: Lino Sanfilippo <LinoSanfilippo@gmx.de>

[ Upstream commit d1180405c7b5c7a1c6bde79d5fc24fe931430737 ]

With commit 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") the
function devm_ioremap() called from pl011_setup_port() was replaced with
devm_ioremap_resource(). Since this function not only remaps but also
requests the ports io memory region it now collides with the .config_port()
callback which requests the same region at uart port registration.

Since devm_ioremap_resource() already claims the memory successfully, the
request in .config_port() fails.

Later at uart port deregistration the attempt to release the unclaimed
memory also fails. The failure results in a “Trying to free nonexistent
resource" warning.

Fix these issues by removing the callbacks that implement the redundant
memory allocation/release. Also make sure that changing the drivers io
memory base address via TIOCSSERIAL is not allowed any more.

Fixes: 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()")
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20211129174238.8333-1-LinoSanfilippo@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/amba-pl011.c | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3d63e9a71c376..5edc3813a9b99 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2094,32 +2094,13 @@ static const char *pl011_type(struct uart_port *port)
 	return uap->port.type == PORT_AMBA ? uap->type : NULL;
 }
 
-/*
- * Release the memory region(s) being used by 'port'
- */
-static void pl011_release_port(struct uart_port *port)
-{
-	release_mem_region(port->mapbase, SZ_4K);
-}
-
-/*
- * Request the memory region(s) being used by 'port'
- */
-static int pl011_request_port(struct uart_port *port)
-{
-	return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
-			!= NULL ? 0 : -EBUSY;
-}
-
 /*
  * Configure/autoconfigure the port.
  */
 static void pl011_config_port(struct uart_port *port, int flags)
 {
-	if (flags & UART_CONFIG_TYPE) {
+	if (flags & UART_CONFIG_TYPE)
 		port->type = PORT_AMBA;
-		pl011_request_port(port);
-	}
 }
 
 /*
@@ -2134,6 +2115,8 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
 		ret = -EINVAL;
 	if (ser->baud_base < 9600)
 		ret = -EINVAL;
+	if (port->mapbase != (unsigned long) ser->iomem_base)
+		ret = -EINVAL;
 	return ret;
 }
 
@@ -2151,8 +2134,6 @@ static const struct uart_ops amba_pl011_pops = {
 	.flush_buffer	= pl011_dma_flush_buffer,
 	.set_termios	= pl011_set_termios,
 	.type		= pl011_type,
-	.release_port	= pl011_release_port,
-	.request_port	= pl011_request_port,
 	.config_port	= pl011_config_port,
 	.verify_port	= pl011_verify_port,
 #ifdef CONFIG_CONSOLE_POLL
@@ -2182,8 +2163,6 @@ static const struct uart_ops sbsa_uart_pops = {
 	.shutdown	= sbsa_uart_shutdown,
 	.set_termios	= sbsa_uart_set_termios,
 	.type		= pl011_type,
-	.release_port	= pl011_release_port,
-	.request_port	= pl011_request_port,
 	.config_port	= pl011_config_port,
 	.verify_port	= pl011_verify_port,
 #ifdef CONFIG_CONSOLE_POLL
-- 
2.34.1

[PATCH 4.19 068/239] floppy: Fix hang in watchdog when disk is ejected

[Greg Kroah-Hartman]

From: Tasos Sahanidis <tasos@tasossah.com>

[ Upstream commit fb48febce7e30baed94dd791e19521abd2c3fd83 ]

When the watchdog detects a disk change, it calls cancel_activity(),
which in turn tries to cancel the fd_timer delayed work.

In the above scenario, fd_timer_fn is set to fd_watchdog(), meaning
it is trying to cancel its own work.
This results in a hang as cancel_delayed_work_sync() is waiting for the
watchdog (itself) to return, which never happens.

This can be reproduced relatively consistently by attempting to read a
broken floppy, and ejecting it while IO is being attempted and retried.

To resolve this, this patch calls cancel_delayed_work() instead, which
cancels the work without waiting for the watchdog to return and finish.

Before this regression was introduced, the code in this section used
del_timer(), and not del_timer_sync() to delete the watchdog timer.

Link: https://lore.kernel.org/r/399e486c-6540-db27-76aa-7a271b061f76@tasossah.com
Fixes: 070ad7e793dc ("floppy: convert to delayed work and single-thread wq")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/floppy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 8f444b375761c..49ac9596c862e 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -1002,7 +1002,7 @@ static DECLARE_DELAYED_WORK(fd_timer, fd_timer_workfn);
 static void cancel_activity(void)
 {
 	do_floppy = NULL;
-	cancel_delayed_work_sync(&fd_timer);
+	cancel_delayed_work(&fd_timer);
 	cancel_work_sync(&floppy_work);
 }
 
-- 
2.34.1

[PATCH 4.19 069/239] media: dib8000: Fix a memleak in dib8000_init()

[Greg Kroah-Hartman]

From: Zhou Qingyang <zhou1615@umn.edu>

[ Upstream commit 8dbdcc7269a83305ee9d677b75064d3530a48ee2 ]

In dib8000_init(), the variable fe is not freed or passed out on the
failure of dib8000_identify(&state->i2c), which could lead to a memleak.

Fix this bug by adding a kfree of fe in the error path.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_DVB_DIB8000=m show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 77e2c0f5d471 ("V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb demodulator DiB8000")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/dib8000.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c
index 5fa787e023c7e..4b9e4afa4c61f 100644
--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -4476,8 +4476,10 @@ static struct dvb_frontend *dib8000_init(struct i2c_adapter *i2c_adap, u8 i2c_ad
 
 	state->timf_default = cfg->pll->timf;
 
-	if (dib8000_identify(&state->i2c) == 0)
+	if (dib8000_identify(&state->i2c) == 0) {
+		kfree(fe);
 		goto error;
+	}
 
 	dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr);
 
-- 
2.34.1

[PATCH 4.19 070/239] media: saa7146: mxb: Fix a NULL pointer dereference in mxb_attach()

[Greg Kroah-Hartman]

From: Zhou Qingyang <zhou1615@umn.edu>

[ Upstream commit 0407c49ebe330333478440157c640fffd986f41b ]

In mxb_attach(dev, info), saa7146_vv_init() is called to allocate a
new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of mxb_probe(dev). There is a dereference of dev->vv_data
in saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init().

Fix this bug by adding a check of saa7146_vv_init().

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_VIDEO_MXB=m show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 03b1930efd3c ("V4L/DVB: saa7146: fix regression of the av7110/budget-av driver")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/saa7146/mxb.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/saa7146/mxb.c b/drivers/media/pci/saa7146/mxb.c
index 6e25654da2567..bfa7a7d15dbf6 100644
--- a/drivers/media/pci/saa7146/mxb.c
+++ b/drivers/media/pci/saa7146/mxb.c
@@ -695,10 +695,16 @@ static struct saa7146_ext_vv vv_data;
 static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
 {
 	struct mxb *mxb;
+	int ret;
 
 	DEB_EE("dev:%p\n", dev);
 
-	saa7146_vv_init(dev, &vv_data);
+	ret = saa7146_vv_init(dev, &vv_data);
+	if (ret) {
+		ERR("Error in saa7146_vv_init()");
+		return ret;
+	}
+
 	if (mxb_probe(dev)) {
 		saa7146_vv_release(dev);
 		return -1;
-- 
2.34.1

[PATCH 4.19 071/239] media: si2157: Fix "warm" tuner state detection

[Greg Kroah-Hartman]

From: Robert Schlabbach <robert_s@gmx.net>

[ Upstream commit a6441ea29cb2c9314654e093a1cd8020b9b851c8 ]

Commit e955f959ac52 ("media: si2157: Better check for running tuner in
init") completely broke the "warm" tuner detection of the si2157 driver
due to a simple endian error: The Si2157 CRYSTAL_TRIM property code is
0x0402 and needs to be transmitted LSB first. However, it was inserted
MSB first, causing the warm detection to always fail and spam the kernel
log with tuner initialization messages each time the DVB frontend
device was closed and reopened:

[  312.215682] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[  312.264334] si2157 16-0060: firmware version: 3.0.5
[  342.248593] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[  342.295743] si2157 16-0060: firmware version: 3.0.5
[  372.328574] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[  372.385035] si2157 16-0060: firmware version: 3.0.5

Also, the reinitializations were observed disturb _other_ tuners on
multi-tuner cards such as the Hauppauge WinTV-QuadHD, leading to missed
or errored packets when one of the other DVB frontend devices on that
card was opened.

Fix the order of the property code bytes to make the warm detection work
again, also reducing the tuner initialization message in the kernel log
to once per power-on, as well as fixing the interference with other
tuners.

Link: https://lore.kernel.org/linux-media/trinity-2a86eb9d-6264-4387-95e1-ba7b79a4050f-1638392923493@3c-app-gmx-bap03

Fixes: e955f959ac52 ("media: si2157: Better check for running tuner in init")
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/tuners/si2157.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index 13770b038048e..a4bba669f234d 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -89,7 +89,7 @@ static int si2157_init(struct dvb_frontend *fe)
 	dev_dbg(&client->dev, "\n");
 
 	/* Try to get Xtal trim property, to verify tuner still running */
-	memcpy(cmd.args, "\x15\x00\x04\x02", 4);
+	memcpy(cmd.args, "\x15\x00\x02\x04", 4);
 	cmd.wlen = 4;
 	cmd.rlen = 4;
 	ret = si2157_cmd_execute(client, &cmd);
-- 
2.34.1

[PATCH 4.19 072/239] sched/rt: Try to restart rt period timer when rt runtime exceeded

[Greg Kroah-Hartman]

From: Li Hua <hucool.lihua@huawei.com>

[ Upstream commit 9b58e976b3b391c0cf02e038d53dd0478ed3013c ]

When rt_runtime is modified from -1 to a valid control value, it may
cause the task to be throttled all the time. Operations like the following
will trigger the bug. E.g:

  1. echo -1 > /proc/sys/kernel/sched_rt_runtime_us
  2. Run a FIFO task named A that executes while(1)
  3. echo 950000 > /proc/sys/kernel/sched_rt_runtime_us

When rt_runtime is -1, The rt period timer will not be activated when task
A enqueued. And then the task will be throttled after setting rt_runtime to
950,000. The task will always be throttled because the rt period timer is
not activated.

Fixes: d0b27fa77854 ("sched: rt-group: synchonised bandwidth period")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Hua <hucool.lihua@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203033618.11895-1-hucool.lihua@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/rt.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index b980cc96604fa..70e8cd3954745 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -50,11 +50,8 @@ void init_rt_bandwidth(struct rt_bandwidth *rt_b, u64 period, u64 runtime)
 	rt_b->rt_period_timer.function = sched_rt_period_timer;
 }
 
-static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
+static inline void do_start_rt_bandwidth(struct rt_bandwidth *rt_b)
 {
-	if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
-		return;
-
 	raw_spin_lock(&rt_b->rt_runtime_lock);
 	if (!rt_b->rt_period_active) {
 		rt_b->rt_period_active = 1;
@@ -72,6 +69,14 @@ static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
 	raw_spin_unlock(&rt_b->rt_runtime_lock);
 }
 
+static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
+{
+	if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
+		return;
+
+	do_start_rt_bandwidth(rt_b);
+}
+
 void init_rt_rq(struct rt_rq *rt_rq)
 {
 	struct rt_prio_array *array;
@@ -980,13 +985,17 @@ static void update_curr_rt(struct rq *rq)
 
 	for_each_sched_rt_entity(rt_se) {
 		struct rt_rq *rt_rq = rt_rq_of_se(rt_se);
+		int exceeded;
 
 		if (sched_rt_runtime(rt_rq) != RUNTIME_INF) {
 			raw_spin_lock(&rt_rq->rt_runtime_lock);
 			rt_rq->rt_time += delta_exec;
-			if (sched_rt_runtime_exceeded(rt_rq))
+			exceeded = sched_rt_runtime_exceeded(rt_rq);
+			if (exceeded)
 				resched_curr(rq);
 			raw_spin_unlock(&rt_rq->rt_runtime_lock);
+			if (exceeded)
+				do_start_rt_bandwidth(sched_rt_bandwidth(rt_rq));
 		}
 	}
 }
@@ -2655,8 +2664,12 @@ static int sched_rt_global_validate(void)
 
 static void sched_rt_do_global(void)
 {
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
 	def_rt_bandwidth.rt_runtime = global_rt_runtime();
 	def_rt_bandwidth.rt_period = ns_to_ktime(global_rt_period());
+	raw_spin_unlock_irqrestore(&def_rt_bandwidth.rt_runtime_lock, flags);
 }
 
 int sched_rt_handler(struct ctl_table *table, int write,
-- 
2.34.1

[PATCH 4.19 073/239] xfrm: fix a small bug in xfrm_sa_len()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 7770a39d7c63faec6c4f33666d49a8cb664d0482 ]

copy_user_offload() will actually push a struct struct xfrm_user_offload,
which is different than (struct xfrm_state *)->xso
(struct xfrm_state_offload)

Fixes: d77e38e612a01 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index f94abe1fdd58f..87932f6ad9d75 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -2813,7 +2813,7 @@ static inline unsigned int xfrm_sa_len(struct xfrm_state *x)
 	if (x->props.extra_flags)
 		l += nla_total_size(sizeof(x->props.extra_flags));
 	if (x->xso.dev)
-		 l += nla_total_size(sizeof(x->xso));
+		 l += nla_total_size(sizeof(struct xfrm_user_offload));
 	if (x->props.smark.v | x->props.smark.m) {
 		l += nla_total_size(sizeof(x->props.smark.v));
 		l += nla_total_size(sizeof(x->props.smark.m));
-- 
2.34.1

[PATCH 4.19 074/239] crypto: stm32/cryp - fix double pm exit

[Greg Kroah-Hartman]

From: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>

[ Upstream commit 6c12e742785bf9333faf60bfb96575bdd763448e ]

Delete extraneous lines in probe error handling code: pm was
disabled twice.

Fixes: 65f9aa36ee47 ("crypto: stm32/cryp - Add power management support")

Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32-cryp.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index 23b0b7bd64c7f..b3b49dce11369 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -2036,8 +2036,6 @@ err_engine1:
 	list_del(&cryp->list);
 	spin_unlock(&cryp_list.lock);
 
-	pm_runtime_disable(dev);
-	pm_runtime_put_noidle(dev);
 	pm_runtime_disable(dev);
 	pm_runtime_put_noidle(dev);
 
-- 
2.34.1

[PATCH 4.19 075/239] media: dw2102: Fix use after free

[Greg Kroah-Hartman]

From: Anton Vasilyev <vasilyev@ispras.ru>

[ Upstream commit 589a9f0eb799f77de2c09583bf5bad221fa5d685 ]

dvb_usb_device_init stores parts of properties at d->props
and d->desc and uses it on dvb_usb_device_exit.
Free of properties on module probe leads to use after free.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204597

The patch makes properties static instead of allocated on heap to prevent
memleak and use after free.
Also fixes s421_properties.devices initialization to have 2 element
instead of 6 copied from p7500_properties.

[mchehab: fix function call alignments]
Link: https://lore.kernel.org/linux-media/20190822104147.4420-1-vasilyev@ispras.ru
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Fixes: 299c7007e936 ("media: dw2102: Fix memleak on sequence of probes")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/dw2102.c | 338 ++++++++++++++++++-----------
 1 file changed, 215 insertions(+), 123 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index 9ce8b4d79d1fa..ebb0c982a6f21 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -2101,46 +2101,153 @@ static struct dvb_usb_device_properties s6x0_properties = {
 	}
 };
 
-static const struct dvb_usb_device_description d1100 = {
-	"Prof 1100 USB ",
-	{&dw2102_table[PROF_1100], NULL},
-	{NULL},
-};
+static struct dvb_usb_device_properties p1100_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = DEVICE_SPECIFIC,
+	.size_of_priv = sizeof(struct dw2102_state),
+	.firmware = P1100_FIRMWARE,
+	.no_reconnect = 1,
 
-static const struct dvb_usb_device_description d660 = {
-	"TeVii S660 USB",
-	{&dw2102_table[TEVII_S660], NULL},
-	{NULL},
-};
+	.i2c_algo = &s6x0_i2c_algo,
+	.rc.core = {
+		.rc_interval = 150,
+		.rc_codes = RC_MAP_TBS_NEC,
+		.module_name = "dw2102",
+		.allowed_protos   = RC_PROTO_BIT_NEC,
+		.rc_query = prof_rc_query,
+	},
 
-static const struct dvb_usb_device_description d480_1 = {
-	"TeVii S480.1 USB",
-	{&dw2102_table[TEVII_S480_1], NULL},
-	{NULL},
+	.generic_bulk_ctrl_endpoint = 0x81,
+	.num_adapters = 1,
+	.download_firmware = dw2102_load_firmware,
+	.read_mac_address = s6x0_read_mac_address,
+	.adapter = {
+		{
+			.num_frontends = 1,
+			.fe = {{
+				.frontend_attach = stv0288_frontend_attach,
+				.stream = {
+					.type = USB_BULK,
+					.count = 8,
+					.endpoint = 0x82,
+					.u = {
+						.bulk = {
+							.buffersize = 4096,
+						}
+					}
+				},
+			} },
+		}
+	},
+	.num_device_descs = 1,
+	.devices = {
+		{"Prof 1100 USB ",
+			{&dw2102_table[PROF_1100], NULL},
+			{NULL},
+		},
+	}
 };
 
-static const struct dvb_usb_device_description d480_2 = {
-	"TeVii S480.2 USB",
-	{&dw2102_table[TEVII_S480_2], NULL},
-	{NULL},
-};
+static struct dvb_usb_device_properties s660_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = DEVICE_SPECIFIC,
+	.size_of_priv = sizeof(struct dw2102_state),
+	.firmware = S660_FIRMWARE,
+	.no_reconnect = 1,
 
-static const struct dvb_usb_device_description d7500 = {
-	"Prof 7500 USB DVB-S2",
-	{&dw2102_table[PROF_7500], NULL},
-	{NULL},
-};
+	.i2c_algo = &s6x0_i2c_algo,
+	.rc.core = {
+		.rc_interval = 150,
+		.rc_codes = RC_MAP_TEVII_NEC,
+		.module_name = "dw2102",
+		.allowed_protos   = RC_PROTO_BIT_NEC,
+		.rc_query = dw2102_rc_query,
+	},
 
-static const struct dvb_usb_device_description d421 = {
-	"TeVii S421 PCI",
-	{&dw2102_table[TEVII_S421], NULL},
-	{NULL},
+	.generic_bulk_ctrl_endpoint = 0x81,
+	.num_adapters = 1,
+	.download_firmware = dw2102_load_firmware,
+	.read_mac_address = s6x0_read_mac_address,
+	.adapter = {
+		{
+			.num_frontends = 1,
+			.fe = {{
+				.frontend_attach = ds3000_frontend_attach,
+				.stream = {
+					.type = USB_BULK,
+					.count = 8,
+					.endpoint = 0x82,
+					.u = {
+						.bulk = {
+							.buffersize = 4096,
+						}
+					}
+				},
+			} },
+		}
+	},
+	.num_device_descs = 3,
+	.devices = {
+		{"TeVii S660 USB",
+			{&dw2102_table[TEVII_S660], NULL},
+			{NULL},
+		},
+		{"TeVii S480.1 USB",
+			{&dw2102_table[TEVII_S480_1], NULL},
+			{NULL},
+		},
+		{"TeVii S480.2 USB",
+			{&dw2102_table[TEVII_S480_2], NULL},
+			{NULL},
+		},
+	}
 };
 
-static const struct dvb_usb_device_description d632 = {
-	"TeVii S632 USB",
-	{&dw2102_table[TEVII_S632], NULL},
-	{NULL},
+static struct dvb_usb_device_properties p7500_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = DEVICE_SPECIFIC,
+	.size_of_priv = sizeof(struct dw2102_state),
+	.firmware = P7500_FIRMWARE,
+	.no_reconnect = 1,
+
+	.i2c_algo = &s6x0_i2c_algo,
+	.rc.core = {
+		.rc_interval = 150,
+		.rc_codes = RC_MAP_TBS_NEC,
+		.module_name = "dw2102",
+		.allowed_protos   = RC_PROTO_BIT_NEC,
+		.rc_query = prof_rc_query,
+	},
+
+	.generic_bulk_ctrl_endpoint = 0x81,
+	.num_adapters = 1,
+	.download_firmware = dw2102_load_firmware,
+	.read_mac_address = s6x0_read_mac_address,
+	.adapter = {
+		{
+			.num_frontends = 1,
+			.fe = {{
+				.frontend_attach = prof_7500_frontend_attach,
+				.stream = {
+					.type = USB_BULK,
+					.count = 8,
+					.endpoint = 0x82,
+					.u = {
+						.bulk = {
+							.buffersize = 4096,
+						}
+					}
+				},
+			} },
+		}
+	},
+	.num_device_descs = 1,
+	.devices = {
+		{"Prof 7500 USB DVB-S2",
+			{&dw2102_table[PROF_7500], NULL},
+			{NULL},
+		},
+	}
 };
 
 static struct dvb_usb_device_properties su3000_properties = {
@@ -2212,6 +2319,59 @@ static struct dvb_usb_device_properties su3000_properties = {
 	}
 };
 
+static struct dvb_usb_device_properties s421_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = DEVICE_SPECIFIC,
+	.size_of_priv = sizeof(struct dw2102_state),
+	.power_ctrl = su3000_power_ctrl,
+	.num_adapters = 1,
+	.identify_state	= su3000_identify_state,
+	.i2c_algo = &su3000_i2c_algo,
+
+	.rc.core = {
+		.rc_interval = 150,
+		.rc_codes = RC_MAP_SU3000,
+		.module_name = "dw2102",
+		.allowed_protos   = RC_PROTO_BIT_RC5,
+		.rc_query = su3000_rc_query,
+	},
+
+	.read_mac_address = su3000_read_mac_address,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.adapter = {
+		{
+		.num_frontends = 1,
+		.fe = {{
+			.streaming_ctrl   = su3000_streaming_ctrl,
+			.frontend_attach  = m88rs2000_frontend_attach,
+			.stream = {
+				.type = USB_BULK,
+				.count = 8,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			}
+		} },
+		}
+	},
+	.num_device_descs = 2,
+	.devices = {
+		{ "TeVii S421 PCI",
+			{ &dw2102_table[TEVII_S421], NULL },
+			{ NULL },
+		},
+		{ "TeVii S632 USB",
+			{ &dw2102_table[TEVII_S632], NULL },
+			{ NULL },
+		},
+	}
+};
+
 static struct dvb_usb_device_properties t220_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 	.usb_ctrl = DEVICE_SPECIFIC,
@@ -2329,101 +2489,33 @@ static struct dvb_usb_device_properties tt_s2_4600_properties = {
 static int dw2102_probe(struct usb_interface *intf,
 		const struct usb_device_id *id)
 {
-	int retval = -ENOMEM;
-	struct dvb_usb_device_properties *p1100;
-	struct dvb_usb_device_properties *s660;
-	struct dvb_usb_device_properties *p7500;
-	struct dvb_usb_device_properties *s421;
-
-	p1100 = kmemdup(&s6x0_properties,
-			sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
-	if (!p1100)
-		goto err0;
-
-	/* copy default structure */
-	/* fill only different fields */
-	p1100->firmware = P1100_FIRMWARE;
-	p1100->devices[0] = d1100;
-	p1100->rc.core.rc_query = prof_rc_query;
-	p1100->rc.core.rc_codes = RC_MAP_TBS_NEC;
-	p1100->adapter->fe[0].frontend_attach = stv0288_frontend_attach;
-
-	s660 = kmemdup(&s6x0_properties,
-		       sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
-	if (!s660)
-		goto err1;
-
-	s660->firmware = S660_FIRMWARE;
-	s660->num_device_descs = 3;
-	s660->devices[0] = d660;
-	s660->devices[1] = d480_1;
-	s660->devices[2] = d480_2;
-	s660->adapter->fe[0].frontend_attach = ds3000_frontend_attach;
-
-	p7500 = kmemdup(&s6x0_properties,
-			sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
-	if (!p7500)
-		goto err2;
-
-	p7500->firmware = P7500_FIRMWARE;
-	p7500->devices[0] = d7500;
-	p7500->rc.core.rc_query = prof_rc_query;
-	p7500->rc.core.rc_codes = RC_MAP_TBS_NEC;
-	p7500->adapter->fe[0].frontend_attach = prof_7500_frontend_attach;
-
-
-	s421 = kmemdup(&su3000_properties,
-		       sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
-	if (!s421)
-		goto err3;
-
-	s421->num_device_descs = 2;
-	s421->devices[0] = d421;
-	s421->devices[1] = d632;
-	s421->adapter->fe[0].frontend_attach = m88rs2000_frontend_attach;
-
-	if (0 == dvb_usb_device_init(intf, &dw2102_properties,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &dw2104_properties,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &dw3101_properties,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &s6x0_properties,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, p1100,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, s660,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, p7500,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, s421,
-			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &su3000_properties,
-			 THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &t220_properties,
-			 THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &tt_s2_4600_properties,
-			 THIS_MODULE, NULL, adapter_nr)) {
-
-		/* clean up copied properties */
-		kfree(s421);
-		kfree(p7500);
-		kfree(s660);
-		kfree(p1100);
+	if (!(dvb_usb_device_init(intf, &dw2102_properties,
+			          THIS_MODULE, NULL, adapter_nr) &&
+	      dvb_usb_device_init(intf, &dw2104_properties,
+				  THIS_MODULE, NULL, adapter_nr) &&
+	      dvb_usb_device_init(intf, &dw3101_properties,
+			          THIS_MODULE, NULL, adapter_nr) &&
+	      dvb_usb_device_init(intf, &s6x0_properties,
+			          THIS_MODULE, NULL, adapter_nr) &&
+	      dvb_usb_device_init(intf, &p1100_properties,
+			          THIS_MODULE, NULL, adapter_nr) &&
+	      dvb_usb_device_init(intf, &s660_properties,
+				  THIS_MODULE, NULL, adapter_nr) &&
+	      dvb_usb_device_init(intf, &p7500_properties,
+				  THIS_MODULE, NULL, adapter_nr) &&
+	      dvb_usb_device_init(intf, &s421_properties,
+				  THIS_MODULE, NULL, adapter_nr) &&
+	      dvb_usb_device_init(intf, &su3000_properties,
+				  THIS_MODULE, NULL, adapter_nr) &&
+	      dvb_usb_device_init(intf, &t220_properties,
+				  THIS_MODULE, NULL, adapter_nr) &&
+	      dvb_usb_device_init(intf, &tt_s2_4600_properties,
+				  THIS_MODULE, NULL, adapter_nr))) {
 
 		return 0;
 	}
 
-	retval = -ENODEV;
-	kfree(s421);
-err3:
-	kfree(p7500);
-err2:
-	kfree(s660);
-err1:
-	kfree(p1100);
-err0:
-	return retval;
+	return -ENODEV;
 }
 
 static void dw2102_disconnect(struct usb_interface *intf)
-- 
2.34.1

[PATCH 4.19 076/239] media: msi001: fix possible null-ptr-deref in msi001_probe()

[Greg Kroah-Hartman]

From: Wang Hai <wanghai38@huawei.com>

[ Upstream commit 3d5831a40d3464eea158180eb12cbd81c5edfb6a ]

I got a null-ptr-deref report:

BUG: kernel NULL pointer dereference, address: 0000000000000060
...
RIP: 0010:v4l2_ctrl_auto_cluster+0x57/0x270
...
Call Trace:
 msi001_probe+0x13b/0x24b [msi001]
 spi_probe+0xeb/0x130
...
 do_syscall_64+0x35/0xb0

In msi001_probe(), if the creation of control for bandwidth_auto
fails, there will be a null-ptr-deref issue when it is used in
v4l2_ctrl_auto_cluster().

Check dev->hdl.error before v4l2_ctrl_auto_cluster() to fix this bug.

Link: https://lore.kernel.org/linux-media/20211026112348.2878040-1-wanghai38@huawei.com
Fixes: 93203dd6c7c4 ("[media] msi001: Mirics MSi001 silicon tuner driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/tuners/msi001.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/media/tuners/msi001.c b/drivers/media/tuners/msi001.c
index 5de6ed7287085..13ffe196b7a42 100644
--- a/drivers/media/tuners/msi001.c
+++ b/drivers/media/tuners/msi001.c
@@ -451,6 +451,13 @@ static int msi001_probe(struct spi_device *spi)
 			V4L2_CID_RF_TUNER_BANDWIDTH_AUTO, 0, 1, 1, 1);
 	dev->bandwidth = v4l2_ctrl_new_std(&dev->hdl, &msi001_ctrl_ops,
 			V4L2_CID_RF_TUNER_BANDWIDTH, 200000, 8000000, 1, 200000);
+	if (dev->hdl.error) {
+		ret = dev->hdl.error;
+		dev_err(&spi->dev, "Could not initialize controls\n");
+		/* control init failed, free handler */
+		goto err_ctrl_handler_free;
+	}
+
 	v4l2_ctrl_auto_cluster(2, &dev->bandwidth_auto, 0, false);
 	dev->lna_gain = v4l2_ctrl_new_std(&dev->hdl, &msi001_ctrl_ops,
 			V4L2_CID_RF_TUNER_LNA_GAIN, 0, 1, 1, 1);
-- 
2.34.1

[PATCH 4.19 077/239] media: coda/imx-vdoa: Handle dma_set_coherent_mask error codes

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 43f0633f89947df57fe0b5025bdd741768007708 ]

The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.

Link: https://lore.kernel.org/linux-media/20211206022201.1639460-1-jiasheng@iscas.ac.cn
Fixes: b0444f18e0b1 ("[media] coda: add i.MX6 VDOA driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/coda/imx-vdoa.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/coda/imx-vdoa.c b/drivers/media/platform/coda/imx-vdoa.c
index 96ab4b61669a3..36d50c3f9b08a 100644
--- a/drivers/media/platform/coda/imx-vdoa.c
+++ b/drivers/media/platform/coda/imx-vdoa.c
@@ -295,7 +295,11 @@ static int vdoa_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret;
 
-	dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(&pdev->dev, "DMA enable failed\n");
+		return ret;
+	}
 
 	vdoa = devm_kzalloc(&pdev->dev, sizeof(*vdoa), GFP_KERNEL);
 	if (!vdoa)
-- 
2.34.1

[PATCH 4.19 078/239] drm/msm/dpu: fix safe status debugfs file

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit f31b0e24d31e18b4503eeaf0032baeacc0beaff6 ]

Make safe_status debugfs fs file actually return safe status rather than
danger status data.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 2d9b7b5fb49c8..52474dcd25738 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -97,8 +97,8 @@ static int _dpu_danger_signal_status(struct seq_file *s,
 					&status);
 	} else {
 		seq_puts(s, "\nSafe signal status:\n");
-		if (kms->hw_mdp->ops.get_danger_status)
-			kms->hw_mdp->ops.get_danger_status(kms->hw_mdp,
+		if (kms->hw_mdp->ops.get_safe_status)
+			kms->hw_mdp->ops.get_safe_status(kms->hw_mdp,
 					&status);
 	}
 	pm_runtime_put_sync(&kms->pdev->dev);
-- 
2.34.1

[PATCH 4.19 079/239] xfrm: interface with if_id 0 should return error

[Greg Kroah-Hartman]

From: Antony Antony <antony.antony@secunet.com>

[ Upstream commit 8dce43919566f06e865f7e8949f5c10d8c2493f5 ]

xfrm interface if_id = 0 would cause xfrm policy lookup errors since
Commit 9f8550e4bd9d.

Now explicitly fail to create an xfrm interface when if_id = 0

With this commit:
 ip link add ipsec0  type xfrm dev lo  if_id 0
 Error: if_id must be non zero.

v1->v2 change:
 - add Fixes: tag

Fixes: 9f8550e4bd9d ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_interface.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c
index 35a020a709852..054897358d904 100644
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -662,11 +662,16 @@ static int xfrmi_newlink(struct net *src_net, struct net_device *dev,
 			struct netlink_ext_ack *extack)
 {
 	struct net *net = dev_net(dev);
-	struct xfrm_if_parms p;
+	struct xfrm_if_parms p = {};
 	struct xfrm_if *xi;
 	int err;
 
 	xfrmi_netlink_parms(data, &p);
+	if (!p.if_id) {
+		NL_SET_ERR_MSG(extack, "if_id must be non zero");
+		return -EINVAL;
+	}
+
 	xi = xfrmi_locate(net, &p);
 	if (xi)
 		return -EEXIST;
@@ -691,7 +696,12 @@ static int xfrmi_changelink(struct net_device *dev, struct nlattr *tb[],
 {
 	struct xfrm_if *xi = netdev_priv(dev);
 	struct net *net = xi->net;
-	struct xfrm_if_parms p;
+	struct xfrm_if_parms p = {};
+
+	if (!p.if_id) {
+		NL_SET_ERR_MSG(extack, "if_id must be non zero");
+		return -EINVAL;
+	}
 
 	xfrmi_netlink_parms(data, &p);
 	xi = xfrmi_locate(net, &p);
-- 
2.34.1

[PATCH 4.19 080/239] xfrm: state and policy should fail if XFRMA_IF_ID 0

[Greg Kroah-Hartman]

From: Antony Antony <antony.antony@secunet.com>

[ Upstream commit 68ac0f3810e76a853b5f7b90601a05c3048b8b54 ]

xfrm ineterface does not allow xfrm if_id = 0
fail to create or update xfrm state and policy.

With this commit:
 ip xfrm policy add src 192.0.2.1 dst 192.0.2.2 dir out if_id 0
 RTNETLINK answers: Invalid argument

 ip xfrm state add src 192.0.2.1 dst 192.0.2.2 proto esp spi 1 \
            reqid 1 mode tunnel aead 'rfc4106(gcm(aes))' \
            0x1111111111111111111111111111111111111111 96 if_id 0
 RTNETLINK answers: Invalid argument

v1->v2 change:
 - add Fixes: tag

Fixes: 9f8550e4bd9d ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 87932f6ad9d75..8d8f9e778cd4f 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -620,8 +620,13 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
 
 	xfrm_smark_init(attrs, &x->props.smark);
 
-	if (attrs[XFRMA_IF_ID])
+	if (attrs[XFRMA_IF_ID]) {
 		x->if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
+		if (!x->if_id) {
+			err = -EINVAL;
+			goto error;
+		}
+	}
 
 	err = __xfrm_init_state(x, false, attrs[XFRMA_OFFLOAD_DEV]);
 	if (err)
@@ -1327,8 +1332,13 @@ static int xfrm_alloc_userspi(struct sk_buff *skb, struct nlmsghdr *nlh,
 
 	mark = xfrm_mark_get(attrs, &m);
 
-	if (attrs[XFRMA_IF_ID])
+	if (attrs[XFRMA_IF_ID]) {
 		if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
+		if (!if_id) {
+			err = -EINVAL;
+			goto out_noput;
+		}
+	}
 
 	if (p->info.seq) {
 		x = xfrm_find_acq_byseq(net, mark, p->info.seq);
@@ -1630,8 +1640,13 @@ static struct xfrm_policy *xfrm_policy_construct(struct net *net, struct xfrm_us
 
 	xfrm_mark_get(attrs, &xp->mark);
 
-	if (attrs[XFRMA_IF_ID])
+	if (attrs[XFRMA_IF_ID]) {
 		xp->if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
+		if (!xp->if_id) {
+			err = -EINVAL;
+			goto error;
+		}
+	}
 
 	return xp;
  error:
-- 
2.34.1

[PATCH 4.19 081/239] usb: ftdi-elan: fix memory leak on device disconnect

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 1646566b5e0c556f779180a8514e521ac735de1e ]

'ftdi' is alloced when probe device, but not free on device disconnect,
this cause a memory leak as follows:

unreferenced object 0xffff88800d584000 (size 8400):
  comm "kworker/0:2", pid 3809, jiffies 4295453055 (age 13.784s)
  hex dump (first 32 bytes):
    00 40 58 0d 80 88 ff ff 00 40 58 0d 80 88 ff ff  .@X......@X.....
    00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de  .............N..
  backtrace:
    [<000000000d47f947>] kmalloc_order_trace+0x19/0x110 mm/slab_common.c:960
    [<000000008548ac68>] ftdi_elan_probe+0x8c/0x880 drivers/usb/misc/ftdi-elan.c:2647
    [<000000007f73e422>] usb_probe_interface+0x31b/0x800 drivers/usb/core/driver.c:396
    [<00000000fe8d07fc>] really_probe+0x299/0xc30 drivers/base/dd.c:517
    [<0000000005da7d32>] __driver_probe_device+0x357/0x500 drivers/base/dd.c:751
    [<000000003c2c9579>] driver_probe_device+0x4e/0x140 drivers/base/dd.c:781

Fix it by freeing 'ftdi' after nobody use it.

Fixes: a5c66e4b2418 ("USB: ftdi-elan: client driver for ELAN Uxxx adapters")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20211217083428.2441-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/misc/ftdi-elan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 76c718ac8c78d..adc2a380be79f 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -202,6 +202,7 @@ static void ftdi_elan_delete(struct kref *kref)
 	mutex_unlock(&ftdi_module_lock);
 	kfree(ftdi->bulk_in_buffer);
 	ftdi->bulk_in_buffer = NULL;
+	kfree(ftdi);
 }
 
 static void ftdi_elan_put_kref(struct usb_ftdi *ftdi)
-- 
2.34.1

[PATCH 4.19 082/239] ARM: dts: armada-38x: Add generic compatible to UART nodes

[Greg Kroah-Hartman]

From: Marek Behún <kabel@kernel.org>

[ Upstream commit 62480772263ab6b52e758f2346c70a526abd1d28 ]

Add generic compatible string "ns16550a" to serial port nodes of Armada
38x.

This makes it possible to use earlycon.

Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/armada-38x.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 929459c427605..6f32f12332824 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -163,7 +163,7 @@
 			};
 
 			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -173,7 +173,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.34.1

[PATCH 4.19 083/239] mmc: meson-mx-sdio: add IRQ check

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

[ Upstream commit 8fc9a77bc64e1f23d07953439817d8402ac9706f ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_threaded_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_threaded_irq() with the
invalid IRQ #s.

Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoC")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211217202717.10041-3-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/meson-mx-sdio.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index 27837a794e7b3..1f7e4352b0677 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -668,6 +668,11 @@ static int meson_mx_mmc_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto error_free_mmc;
+	}
+
 	ret = devm_request_threaded_irq(host->controller_dev, irq,
 					meson_mx_mmc_irq,
 					meson_mx_mmc_irq_thread, IRQF_ONESHOT,
-- 
2.34.1

[PATCH 4.19 084/239] x86/mce/inject: Avoid out-of-bounds write when setting flags

[Greg Kroah-Hartman]

From: Zhang Zixun <zhang133010@icloud.com>

[ Upstream commit de768416b203ac84e02a757b782a32efb388476f ]

A contrived zero-length write, for example, by using write(2):

  ...
  ret = write(fd, str, 0);
  ...

to the "flags" file causes:

  BUG: KASAN: stack-out-of-bounds in flags_write
  Write of size 1 at addr ffff888019be7ddf by task writefile/3787

  CPU: 4 PID: 3787 Comm: writefile Not tainted 5.16.0-rc7+ #12
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014

due to accessing buf one char before its start.

Prevent such out-of-bounds access.

  [ bp: Productize into a proper patch. Link below is the next best
    thing because the original mail didn't get archived on lore. ]

Fixes: 0451d14d0561 ("EDAC, mce_amd_inj: Modify flags attribute to use string arguments")
Signed-off-by: Zhang Zixun <zhang133010@icloud.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/linux-edac/YcnePfF1OOqoQwrX@zn.tnic/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mcheck/mce-inject.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index 9cc524be3c949..14dc3c1f7fb43 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -354,7 +354,7 @@ static ssize_t flags_write(struct file *filp, const char __user *ubuf,
 	char buf[MAX_FLAG_OPT_SIZE], *__buf;
 	int err;
 
-	if (cnt > MAX_FLAG_OPT_SIZE)
+	if (!cnt || cnt > MAX_FLAG_OPT_SIZE)
 		return -EINVAL;
 
 	if (copy_from_user(&buf, ubuf, cnt))
-- 
2.34.1

[PATCH 4.19 085/239] pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in __nonstatic_find_io_region()

[Greg Kroah-Hartman]

From: Zhou Qingyang <zhou1615@umn.edu>

[ Upstream commit ca0fe0d7c35c97528bdf621fdca75f13157c27af ]

In __nonstatic_find_io_region(), pcmcia_make_resource() is assigned to
res and used in pci_bus_alloc_resource(). There is a dereference of res
in pci_bus_alloc_resource(), which could lead to a NULL pointer
dereference on failure of pcmcia_make_resource().

Fix this bug by adding a check of res.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_PCCARD_NONSTATIC=y show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
[linux@dominikbrodowski.net: Fix typo in commit message]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pcmcia/rsrc_nonstatic.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 49377d502b740..5cb29d6951df2 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -693,6 +693,9 @@ static struct resource *__nonstatic_find_io_region(struct pcmcia_socket *s,
 	unsigned long min = base;
 	int ret;
 
+	if (!res)
+		return NULL;
+
 	data.mask = align - 1;
 	data.offset = base & data.mask;
 	data.map = &s_data->io_db;
-- 
2.34.1

[PATCH 4.19 086/239] pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in nonstatic_find_mem_region()

[Greg Kroah-Hartman]

From: Zhou Qingyang <zhou1615@umn.edu>

[ Upstream commit 977d2e7c63c3d04d07ba340b39987742e3241554 ]

In nonstatic_find_mem_region(), pcmcia_make_resource() is assigned to
res and used in pci_bus_alloc_resource(). There a dereference of res
in pci_bus_alloc_resource(), which could lead to a NULL pointer
dereference on failure of pcmcia_make_resource().

Fix this bug by adding a check of res.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_PCCARD_NONSTATIC=y show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pcmcia/rsrc_nonstatic.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 5cb29d6951df2..123420cac6b54 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -815,6 +815,9 @@ static struct resource *nonstatic_find_mem_region(u_long base, u_long num,
 	unsigned long min, max;
 	int ret, i, j;
 
+	if (!res)
+		return NULL;
+
 	low = low || !(s->features & SS_CAP_PAGE_REGS);
 
 	data.mask = align - 1;
-- 
2.34.1

[PATCH 4.19 087/239] netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check()

[Greg Kroah-Hartman]

From: Xin Xiong <xiongx18@fudan.edu.cn>

[ Upstream commit d94a69cb2cfa77294921aae9afcfb866e723a2da ]

The issue takes place in one error path of clusterip_tg_check(). When
memcmp() returns nonzero, the function simply returns the error code,
forgetting to decrease the reference count of a clusterip_config
object, which is bumped earlier by clusterip_config_find_get(). This
may incur reference count leak.

Fix this issue by decrementing the refcount of the object in specific
error path.

Fixes: 06aa151ad1fc74 ("netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/netfilter/ipt_CLUSTERIP.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index 2fa1963259880..954c96f4ddd0f 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -509,8 +509,11 @@ static int clusterip_tg_check(const struct xt_tgchk_param *par)
 			if (IS_ERR(config))
 				return PTR_ERR(config);
 		}
-	} else if (memcmp(&config->clustermac, &cipinfo->clustermac, ETH_ALEN))
+	} else if (memcmp(&config->clustermac, &cipinfo->clustermac, ETH_ALEN)) {
+		clusterip_config_entry_put(config);
+		clusterip_config_put(config);
 		return -EINVAL;
+	}
 
 	ret = nf_ct_netns_get(par->net, par->family);
 	if (ret < 0) {
-- 
2.34.1

[PATCH 4.19 088/239] ppp: ensure minimum packet size in ppp_write()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 44073187990d5629804ce0627525f6ea5cfef171 ]

It seems pretty clear ppp layer assumed user space
would always be kind to provide enough data
in their write() to a ppp device.

This patch makes sure user provides at least
2 bytes.

It adds PPP_PROTO_LEN macro that could replace
in net-next many occurrences of hard-coded 2 value.

I replaced only one occurrence to ease backports
to stable kernels.

The bug manifests in the following report:

BUG: KMSAN: uninit-value in ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740
 ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740
 __ppp_xmit_process+0x23e/0x4b0 drivers/net/ppp/ppp_generic.c:1640
 ppp_xmit_process+0x1fe/0x480 drivers/net/ppp/ppp_generic.c:1661
 ppp_write+0x5cb/0x5e0 drivers/net/ppp/ppp_generic.c:513
 do_iter_write+0xb0c/0x1500 fs/read_write.c:853
 vfs_writev fs/read_write.c:924 [inline]
 do_writev+0x645/0xe00 fs/read_write.c:967
 __do_sys_writev fs/read_write.c:1040 [inline]
 __se_sys_writev fs/read_write.c:1037 [inline]
 __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1126 [inline]
 ppp_write+0x11d/0x5e0 drivers/net/ppp/ppp_generic.c:501
 do_iter_write+0xb0c/0x1500 fs/read_write.c:853
 vfs_writev fs/read_write.c:924 [inline]
 do_writev+0x645/0xe00 fs/read_write.c:967
 __do_sys_writev fs/read_write.c:1040 [inline]
 __se_sys_writev fs/read_write.c:1037 [inline]
 __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-ppp@vger.kernel.org
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ppp/ppp_generic.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index dc9de8731c564..3f335b57d5cde 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -73,6 +73,8 @@
 #define MPHDRLEN	6	/* multilink protocol header length */
 #define MPHDRLEN_SSN	4	/* ditto with short sequence numbers */
 
+#define PPP_PROTO_LEN	2
+
 /*
  * An instance of /dev/ppp can be associated with either a ppp
  * interface unit or a ppp channel.  In both cases, file->private_data
@@ -502,6 +504,9 @@ static ssize_t ppp_write(struct file *file, const char __user *buf,
 
 	if (!pf)
 		return -ENXIO;
+	/* All PPP packets should start with the 2-byte protocol */
+	if (count < PPP_PROTO_LEN)
+		return -EINVAL;
 	ret = -ENOMEM;
 	skb = alloc_skb(count + pf->hdrlen, GFP_KERNEL);
 	if (!skb)
@@ -1550,7 +1555,7 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
 	}
 
 	++ppp->stats64.tx_packets;
-	ppp->stats64.tx_bytes += skb->len - 2;
+	ppp->stats64.tx_bytes += skb->len - PPP_PROTO_LEN;
 
 	switch (proto) {
 	case PPP_IP:
-- 
2.34.1

[PATCH 4.19 089/239] staging: greybus: audio: Check null pointer

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 2e81948177d769106754085c3e03534e6cc1f623 ]

As the possible alloc failure of devm_kcalloc(), it could return null
pointer.
Therefore, 'strings' should be checked and return NULL if alloc fails to
prevent the dereference of the NULL pointer.
Also, the caller should also deal with the return value of the
gb_generate_enum_strings() and return -ENOMEM if returns NULL.
Moreover, because the memory allocated with devm_kzalloc() will be
freed automatically when the last reference to the device is dropped,
the 'gbe' in gbaudio_tplg_create_enum_kctl() and
gbaudio_tplg_create_enum_ctl() do not need to free manually.
But the 'control' in gbaudio_tplg_create_widget() and
gbaudio_tplg_process_kcontrols() has a specially error handle to
cleanup.
So it should be better to cleanup 'control' when fails.

Fixes: e65579e335da ("greybus: audio: topology: Enable enumerated control support")
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220104150628.1987906-1-jiasheng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/greybus/audio_topology.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/staging/greybus/audio_topology.c b/drivers/staging/greybus/audio_topology.c
index 860247d718184..a48e59fe18e81 100644
--- a/drivers/staging/greybus/audio_topology.c
+++ b/drivers/staging/greybus/audio_topology.c
@@ -145,6 +145,9 @@ static const char **gb_generate_enum_strings(struct gbaudio_module_info *gb,
 
 	items = le32_to_cpu(gbenum->items);
 	strings = devm_kcalloc(gb->dev, items, sizeof(char *), GFP_KERNEL);
+	if (!strings)
+		return NULL;
+
 	data = gbenum->names;
 
 	for (i = 0; i < items; i++) {
@@ -662,6 +665,8 @@ static int gbaudio_tplg_create_enum_kctl(struct gbaudio_module_info *gb,
 	/* since count=1, and reg is dummy */
 	gbe->max = le32_to_cpu(gb_enum->items);
 	gbe->texts = gb_generate_enum_strings(gb, gb_enum);
+	if (!gbe->texts)
+		return -ENOMEM;
 
 	/* debug enum info */
 	dev_dbg(gb->dev, "Max:%d, name_length:%d\n", gbe->max,
@@ -871,6 +876,8 @@ static int gbaudio_tplg_create_enum_ctl(struct gbaudio_module_info *gb,
 	/* since count=1, and reg is dummy */
 	gbe->max = le32_to_cpu(gb_enum->items);
 	gbe->texts = gb_generate_enum_strings(gb, gb_enum);
+	if (!gbe->texts)
+		return -ENOMEM;
 
 	/* debug enum info */
 	dev_dbg(gb->dev, "Max:%d, name_length:%d\n", gbe->max,
@@ -1044,6 +1051,10 @@ static int gbaudio_tplg_create_widget(struct gbaudio_module_info *module,
 			csize += le16_to_cpu(gbenum->names_length);
 			control->texts = (const char * const *)
 				gb_generate_enum_strings(module, gbenum);
+			if (!control->texts) {
+				ret = -ENOMEM;
+				goto error;
+			}
 			control->items = le32_to_cpu(gbenum->items);
 		} else {
 			csize = sizeof(struct gb_audio_control);
@@ -1192,6 +1203,10 @@ static int gbaudio_tplg_process_kcontrols(struct gbaudio_module_info *module,
 			csize += le16_to_cpu(gbenum->names_length);
 			control->texts = (const char * const *)
 				gb_generate_enum_strings(module, gbenum);
+			if (!control->texts) {
+				ret = -ENOMEM;
+				goto error;
+			}
 			control->items = le32_to_cpu(gbenum->items);
 		} else {
 			csize = sizeof(struct gb_audio_control);
-- 
2.34.1

[PATCH 4.19 090/239] fsl/fman: Check for null pointer after calling devm_ioremap

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit d5a73ec96cc57cf67e51b12820fc2354e7ca46f8 ]

As the possible failure of the allocation, the devm_ioremap() may return
NULL pointer.
Take tgec_initialization() as an example.
If allocation fails, the params->base_addr will be NULL pointer and will
be assigned to tgec->regs in tgec_config().
Then it will cause the dereference of NULL pointer in set_mac_address(),
which is called by tgec_init().
Therefore, it should be better to add the sanity check after the calling
of the devm_ioremap().

Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fman/mac.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index a847b9c3b31a9..713abcd9371fa 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -94,14 +94,17 @@ static void mac_exception(void *handle, enum fman_mac_exceptions ex)
 		__func__, ex);
 }
 
-static void set_fman_mac_params(struct mac_device *mac_dev,
-				struct fman_mac_params *params)
+static int set_fman_mac_params(struct mac_device *mac_dev,
+			       struct fman_mac_params *params)
 {
 	struct mac_priv_s *priv = mac_dev->priv;
 
 	params->base_addr = (typeof(params->base_addr))
 		devm_ioremap(priv->dev, mac_dev->res->start,
 			     resource_size(mac_dev->res));
+	if (!params->base_addr)
+		return -ENOMEM;
+
 	memcpy(&params->addr, mac_dev->addr, sizeof(mac_dev->addr));
 	params->max_speed	= priv->max_speed;
 	params->phy_if		= mac_dev->phy_if;
@@ -112,6 +115,8 @@ static void set_fman_mac_params(struct mac_device *mac_dev,
 	params->event_cb	= mac_exception;
 	params->dev_id		= mac_dev;
 	params->internal_phy_node = priv->internal_phy_node;
+
+	return 0;
 }
 
 static int tgec_initialization(struct mac_device *mac_dev)
@@ -123,7 +128,9 @@ static int tgec_initialization(struct mac_device *mac_dev)
 
 	priv = mac_dev->priv;
 
-	set_fman_mac_params(mac_dev, &params);
+	err = set_fman_mac_params(mac_dev, &params);
+	if (err)
+		goto _return;
 
 	mac_dev->fman_mac = tgec_config(&params);
 	if (!mac_dev->fman_mac) {
@@ -169,7 +176,9 @@ static int dtsec_initialization(struct mac_device *mac_dev)
 
 	priv = mac_dev->priv;
 
-	set_fman_mac_params(mac_dev, &params);
+	err = set_fman_mac_params(mac_dev, &params);
+	if (err)
+		goto _return;
 
 	mac_dev->fman_mac = dtsec_config(&params);
 	if (!mac_dev->fman_mac) {
@@ -218,7 +227,9 @@ static int memac_initialization(struct mac_device *mac_dev)
 
 	priv = mac_dev->priv;
 
-	set_fman_mac_params(mac_dev, &params);
+	err = set_fman_mac_params(mac_dev, &params);
+	if (err)
+		goto _return;
 
 	if (priv->max_speed == SPEED_10000)
 		params.phy_if = PHY_INTERFACE_MODE_XGMII;
-- 
2.34.1

[PATCH 4.19 091/239] Bluetooth: hci_bcm: Check for error irq

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit b38cd3b42fba66cc538edb9cf77e07881f43f8e2 ]

For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.

Fixes: 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_bcm.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 3e386f68faa02..1a298f13bcc87 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1052,7 +1052,12 @@ static int bcm_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	dev->dev = &pdev->dev;
-	dev->irq = platform_get_irq(pdev, 0);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+
+	dev->irq = ret;
 
 	if (has_acpi_companion(&pdev->dev)) {
 		ret = bcm_acpi_probe(dev);
-- 
2.34.1

[PATCH 4.19 092/239] spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 69c1b87516e327a60b39f96b778fe683259408bf ]

If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for meson_spifc_probe.

Fixes: c3e4bc5434d2 ("spi: meson: Add support for Amlogic Meson SPIFC")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220107075424.7774-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-meson-spifc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-meson-spifc.c b/drivers/spi/spi-meson-spifc.c
index 616566e793c62..28975b6f054fa 100644
--- a/drivers/spi/spi-meson-spifc.c
+++ b/drivers/spi/spi-meson-spifc.c
@@ -357,6 +357,7 @@ static int meson_spifc_probe(struct platform_device *pdev)
 	return 0;
 out_clk:
 	clk_disable_unprepare(spifc->clk);
+	pm_runtime_disable(spifc->dev);
 out_err:
 	spi_master_put(master);
 	return ret;
-- 
2.34.1

[PATCH 4.19 093/239] tpm: add request_locality before write TPM_INT_ENABLE

[Greg Kroah-Hartman]

From: Chen Jun <chenjun102@huawei.com>

[ Upstream commit 0ef333f5ba7f24f5d8478425c163d3097f1c7afd ]

Locality is not appropriately requested before writing the int mask.
Add the missing boilerplate.

Fixes: e6aef069b6e9 ("tpm_tis: convert to using locality callbacks")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/tpm/tpm_tis_core.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index c9a5f34097df5..c95ce9323d77a 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -874,7 +874,15 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 	intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
 		   TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
 	intmask &= ~TPM_GLOBAL_INT_ENABLE;
+
+	rc = request_locality(chip, 0);
+	if (rc < 0) {
+		rc = -ENODEV;
+		goto out_err;
+	}
+
 	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+	release_locality(chip, 0);
 
 	rc = tpm2_probe(chip);
 	if (rc)
-- 
2.34.1

[PATCH 4.19 094/239] can: softing: softing_startstop(): fix set but not used variable warning

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

[ Upstream commit 370d988cc529598ebaec6487d4f84c2115dc696b ]

In the function softing_startstop() the variable error_reporting is
assigned but not used. The code that uses this variable is commented
out. Its stated that the functionality is not finally verified.

To fix the warning:

| drivers/net/can/softing/softing_fw.c:424:9: error: variable 'error_reporting' set but not used [-Werror,-Wunused-but-set-variable]

remove the comment, activate the code, but add a "0 &&" to the if
expression and rely on the optimizer rather than the preprocessor to
remove the code.

Link: https://lore.kernel.org/all/20220109103126.1872833-1-mkl@pengutronix.de
Fixes: 03fd3cf5a179 ("can: add driver for Softing card")
Cc: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/softing/softing_fw.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c
index aac58ce6e371a..209eddeb822e5 100644
--- a/drivers/net/can/softing/softing_fw.c
+++ b/drivers/net/can/softing/softing_fw.c
@@ -576,18 +576,19 @@ int softing_startstop(struct net_device *dev, int up)
 		if (ret < 0)
 			goto failed;
 	}
-	/* enable_error_frame */
-	/*
+
+	/* enable_error_frame
+	 *
 	 * Error reporting is switched off at the moment since
 	 * the receiving of them is not yet 100% verified
 	 * This should be enabled sooner or later
-	 *
-	if (error_reporting) {
+	 */
+	if (0 && error_reporting) {
 		ret = softing_fct_cmd(card, 51, "enable_error_frame");
 		if (ret < 0)
 			goto failed;
 	}
-	*/
+
 	/* initialize interface */
 	iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 2]);
 	iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 4]);
-- 
2.34.1

[PATCH 4.19 095/239] can: xilinx_can: xcan_probe(): check for error irq

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit c6564c13dae25cd7f8e1de5127b4da4500ee5844 ]

For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().

Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq()
effectively convert that into -EINVAL, even at probe time rather than
later on. So it might be better to check just now.

Fixes: b1201e44f50b ("can: xilinx CAN controller support")
Link: https://lore.kernel.org/all/20211224021324.1447494-1-jiasheng@iscas.ac.cn
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/xilinx_can.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index b01c6da4dd814..90447a420ec7c 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1536,7 +1536,12 @@ static int xcan_probe(struct platform_device *pdev)
 	spin_lock_init(&priv->tx_lock);
 
 	/* Get IRQ for the device */
-	ndev->irq = platform_get_irq(pdev, 0);
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto err_free;
+
+	ndev->irq = ret;
+
 	ndev->flags |= IFF_ECHO;	/* We support local echo */
 
 	platform_set_drvdata(pdev, ndev);
-- 
2.34.1

[PATCH 4.19 096/239] pcmcia: fix setting of kthread task states

[Greg Kroah-Hartman]

From: Dominik Brodowski <linux@dominikbrodowski.net>

[ Upstream commit fbb3485f1f931102d8ba606f1c28123f5b48afa3 ]

We need to set TASK_INTERRUPTIBLE before calling kthread_should_stop().
Otherwise, kthread_stop() might see that the pccardd thread is still
in TASK_RUNNING state and fail to wake it up.

Additionally, we only need to set the state back to TASK_RUNNING if
kthread_should_stop() breaks the loop.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: d3046ba809ce ("pcmcia: fix a boot time warning in pcmcia cs code")
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pcmcia/cs.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 8c8caec3a72cc..182e5ef4ab83d 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -669,18 +669,16 @@ static int pccardd(void *__skt)
 		if (events || sysfs_events)
 			continue;
 
+		set_current_state(TASK_INTERRUPTIBLE);
 		if (kthread_should_stop())
 			break;
 
-		set_current_state(TASK_INTERRUPTIBLE);
-
 		schedule();
 
-		/* make sure we are running */
-		__set_current_state(TASK_RUNNING);
-
 		try_to_freeze();
 	}
+	/* make sure we are running before we exit */
+	__set_current_state(TASK_RUNNING);
 
 	/* shut down socket, if a device is still present */
 	if (skt->state & SOCKET_PRESENT) {
-- 
2.34.1

[PATCH 4.19 097/239] net: mcs7830: handle usb read errors properly

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit d668769eb9c52b150753f1653f7f5a0aeb8239d2 ]

Syzbot reported uninit value in mcs7830_bind(). The problem was in
missing validation check for bytes read via usbnet_read_cmd().

usbnet_read_cmd() internally calls usb_control_msg(), that returns
number of bytes read. Code should validate that requested number of bytes
was actually read.

So, this patch adds missing size validation check inside
mcs7830_get_reg() to prevent uninit value bugs

Reported-and-tested-by: syzbot+003c0a286b9af5412510@syzkaller.appspotmail.com
Fixes: 2a36d7083438 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220106225716.7425-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/mcs7830.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 5a47e5510ca82..c0f52a622964f 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -121,8 +121,16 @@ static const char driver_name[] = "MOSCHIP usb-ethernet driver";
 
 static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
 {
-	return usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
-				0x0000, index, data, size);
+	int ret;
+
+	ret = usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
+			      0x0000, index, data, size);
+	if (ret < 0)
+		return ret;
+	else if (ret < size)
+		return -ENODATA;
+
+	return ret;
 }
 
 static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data)
-- 
2.34.1

[PATCH 4.19 098/239] ext4: avoid trim error on fs with small groups

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 173b6e383d2a204c9921ffc1eca3b87aa2106c33 ]

A user reported FITRIM ioctl failing for him on ext4 on some devices
without apparent reason.  After some debugging we've found out that
these devices (being LVM volumes) report rather large discard
granularity of 42MB and the filesystem had 1k blocksize and thus group
size of 8MB. Because ext4 FITRIM implementation puts discard
granularity into minlen, ext4_trim_fs() declared the trim request as
invalid. However just silently doing nothing seems to be a more
appropriate reaction to such combination of parameters since user did
not specify anything wrong.

CC: Lukas Czerner <lczerner@redhat.com>
Fixes: 5c2ed62fd447 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/ioctl.c   | 2 --
 fs/ext4/mballoc.c | 8 ++++++++
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index 21c9ebfe83478..484cb68c34d92 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -1052,8 +1052,6 @@ resizefs_out:
 		    sizeof(range)))
 			return -EFAULT;
 
-		range.minlen = max((unsigned int)range.minlen,
-				   q->limits.discard_granularity);
 		ret = ext4_trim_fs(sb, &range);
 		if (ret < 0)
 			return ret;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 447aa17c804e2..db8243627b085 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -5260,6 +5260,7 @@ out:
  */
 int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
 {
+	struct request_queue *q = bdev_get_queue(sb->s_bdev);
 	struct ext4_group_info *grp;
 	ext4_group_t group, first_group, last_group;
 	ext4_grpblk_t cnt = 0, first_cluster, last_cluster;
@@ -5278,6 +5279,13 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
 	    start >= max_blks ||
 	    range->len < sb->s_blocksize)
 		return -EINVAL;
+	/* No point to try to trim less than discard granularity */
+	if (range->minlen < q->limits.discard_granularity) {
+		minlen = EXT4_NUM_B2C(EXT4_SB(sb),
+			q->limits.discard_granularity >> sb->s_blocksize_bits);
+		if (minlen > EXT4_CLUSTERS_PER_GROUP(sb))
+			goto out;
+	}
 	if (end >= max_blks)
 		end = max_blks - 1;
 	if (end <= first_data_blk)
-- 
2.34.1

[PATCH 4.19 099/239] ALSA: jack: Add missing rwsem around snd_ctl_remove() calls

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 06764dc931848c3a9bc01a63bbf76a605408bb54 ]

snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation).  This patch add the missing
rwsem calls around it.

Fixes: 9058cbe1eed2 ("ALSA: jack: implement kctl creating for jack devices")
Link: https://lore.kernel.org/r/20211116071314.15065-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/jack.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/core/jack.c b/sound/core/jack.c
index 847a8f3fd06ea..acb531749efb0 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -68,10 +68,13 @@ static int snd_jack_dev_free(struct snd_device *device)
 	struct snd_card *card = device->card;
 	struct snd_jack_kctl *jack_kctl, *tmp_jack_kctl;
 
+	down_write(&card->controls_rwsem);
 	list_for_each_entry_safe(jack_kctl, tmp_jack_kctl, &jack->kctl_list, list) {
 		list_del_init(&jack_kctl->list);
 		snd_ctl_remove(card, jack_kctl->kctl);
 	}
+	up_write(&card->controls_rwsem);
+
 	if (jack->private_free)
 		jack->private_free(jack);
 
-- 
2.34.1

[PATCH 4.19 100/239] ALSA: PCM: Add missing rwsem around snd_ctl_remove() calls

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 5471e9762e1af4b7df057a96bfd46cc250979b88 ]

snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation).  This patch add the missing
rwsem calls around it.

Fixes: a8ff48cb7083 ("ALSA: pcm: Free chmap at PCM free callback, too")
Link: https://lore.kernel.org/r/20211116071314.15065-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/pcm.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 01b9d62eef14d..b6ed38dec4357 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -874,7 +874,11 @@ EXPORT_SYMBOL(snd_pcm_new_internal);
 static void free_chmap(struct snd_pcm_str *pstr)
 {
 	if (pstr->chmap_kctl) {
-		snd_ctl_remove(pstr->pcm->card, pstr->chmap_kctl);
+		struct snd_card *card = pstr->pcm->card;
+
+		down_write(&card->controls_rwsem);
+		snd_ctl_remove(card, pstr->chmap_kctl);
+		up_write(&card->controls_rwsem);
 		pstr->chmap_kctl = NULL;
 	}
 }
-- 
2.34.1

[PATCH 4.19 101/239] ALSA: hda: Add missing rwsem around snd_ctl_remove() calls

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 80bd64af75b4bb11c0329bc66c35da2ddfb66d88 ]

snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation).  This patch add the missing
rwsem calls around it.

Fixes: d13bd412dce2 ("ALSA: hda - Manage kcontrol lists")
Link: https://lore.kernel.org/r/20211116071314.15065-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_codec.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 7f1e763ccca88..b43558ffd78ab 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1705,8 +1705,11 @@ void snd_hda_ctls_clear(struct hda_codec *codec)
 {
 	int i;
 	struct hda_nid_item *items = codec->mixers.list;
+
+	down_write(&codec->card->controls_rwsem);
 	for (i = 0; i < codec->mixers.used; i++)
 		snd_ctl_remove(codec->card, items[i].kctl);
+	up_write(&codec->card->controls_rwsem);
 	snd_array_free(&codec->mixers);
 	snd_array_free(&codec->nids);
 }
-- 
2.34.1

[PATCH 4.19 102/239] RDMA/hns: Validate the pkey index

[Greg Kroah-Hartman]

From: Kamal Heib <kamalheib1@gmail.com>

[ Upstream commit 2a67fcfa0db6b4075515bd23497750849b88850f ]

Before query pkey, make sure that the queried index is valid.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20211117145954.123893-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hns/hns_roce_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/infiniband/hw/hns/hns_roce_main.c b/drivers/infiniband/hw/hns/hns_roce_main.c
index c5cae9a38c044..5e60a2596d2bf 100644
--- a/drivers/infiniband/hw/hns/hns_roce_main.c
+++ b/drivers/infiniband/hw/hns/hns_roce_main.c
@@ -295,6 +295,9 @@ static enum rdma_link_layer hns_roce_get_link_layer(struct ib_device *device,
 static int hns_roce_query_pkey(struct ib_device *ib_dev, u8 port, u16 index,
 			       u16 *pkey)
 {
+	if (index > 0)
+		return -EINVAL;
+
 	*pkey = PKEY_ID;
 
 	return 0;
-- 
2.34.1

[PATCH 4.19 103/239] powerpc/prom_init: Fix improper check of prom_getprop()

[Greg Kroah-Hartman]

From: Peiwei Hu <jlu.hpw@foxmail.com>

[ Upstream commit 869fb7e5aecbc163003f93f36dcc26d0554319f6 ]

prom_getprop() can return PROM_ERROR. Binary operator can not identify
it.

Fixes: 94d2dde738a5 ("[POWERPC] Efika: prune fixups and make them more carefull")
Signed-off-by: Peiwei Hu <jlu.hpw@foxmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/tencent_BA28CC6897B7C95A92EB8C580B5D18589105@qq.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/prom_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index af1e38febe496..29a8087a49010 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2805,7 +2805,7 @@ static void __init fixup_device_tree_efika_add_phy(void)
 
 	/* Check if the phy-handle property exists - bail if it does */
 	rv = prom_getprop(node, "phy-handle", prop, sizeof(prop));
-	if (!rv)
+	if (rv <= 0)
 		return;
 
 	/*
-- 
2.34.1

[PATCH 4.19 104/239] ASoC: uniphier: drop selecting non-existing SND_SOC_UNIPHIER_AIO_DMA

[Greg Kroah-Hartman]

From: Lukas Bulwahn <lukas.bulwahn@gmail.com>

[ Upstream commit 49f893253ab43566e34332a969324531fea463f6 ]

Commit f37fe2f9987b ("ASoC: uniphier: add support for UniPhier AIO common
driver") adds configs SND_SOC_UNIPHIER_{LD11,PXS2}, which select the
non-existing config SND_SOC_UNIPHIER_AIO_DMA.

Hence, ./scripts/checkkconfigsymbols.py warns:

  SND_SOC_UNIPHIER_AIO_DMA
  Referencing files: sound/soc/uniphier/Kconfig

Probably, there is actually no further config intended to be selected
here. So, just drop selecting the non-existing config.

Fixes: f37fe2f9987b ("ASoC: uniphier: add support for UniPhier AIO common driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211125095158.8394-2-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/uniphier/Kconfig | 2 --
 1 file changed, 2 deletions(-)

diff --git a/sound/soc/uniphier/Kconfig b/sound/soc/uniphier/Kconfig
index aa3592ee1358b..ddfa6424c656b 100644
--- a/sound/soc/uniphier/Kconfig
+++ b/sound/soc/uniphier/Kconfig
@@ -23,7 +23,6 @@ config SND_SOC_UNIPHIER_LD11
 	tristate "UniPhier LD11/LD20 Device Driver"
 	depends on SND_SOC_UNIPHIER
 	select SND_SOC_UNIPHIER_AIO
-	select SND_SOC_UNIPHIER_AIO_DMA
 	help
 	  This adds ASoC driver for Socionext UniPhier LD11/LD20
 	  input and output that can be used with other codecs.
@@ -34,7 +33,6 @@ config SND_SOC_UNIPHIER_PXS2
 	tristate "UniPhier PXs2 Device Driver"
 	depends on SND_SOC_UNIPHIER
 	select SND_SOC_UNIPHIER_AIO
-	select SND_SOC_UNIPHIER_AIO_DMA
 	help
 	  This adds ASoC driver for Socionext UniPhier PXs2
 	  input and output that can be used with other codecs.
-- 
2.34.1

[PATCH 4.19 105/239] ALSA: oss: fix compile error when OSS_DEBUG is enabled

[Greg Kroah-Hartman]

From: Bixuan Cui <cuibixuan@linux.alibaba.com>

[ Upstream commit 8e7daf318d97f25e18b2fc7eb5909e34cd903575 ]

Fix compile error when OSS_DEBUG is enabled:
    sound/core/oss/pcm_oss.c: In function 'snd_pcm_oss_set_trigger':
    sound/core/oss/pcm_oss.c:2055:10: error: 'substream' undeclared (first
    use in this function); did you mean 'csubstream'?
      pcm_dbg(substream->pcm, "pcm_oss: trigger = 0x%x\n", trigger);
              ^

Fixes: 61efcee8608c ("ALSA: oss: Use standard printk helpers")
Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Link: https://lore.kernel.org/r/1638349134-110369-1-git-send-email-cuibixuan@linux.alibaba.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/oss/pcm_oss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 2b3bd6f31e4c1..cd68a0ae82d31 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -2070,7 +2070,7 @@ static int snd_pcm_oss_set_trigger(struct snd_pcm_oss_file *pcm_oss_file, int tr
 	int err, cmd;
 
 #ifdef OSS_DEBUG
-	pcm_dbg(substream->pcm, "pcm_oss: trigger = 0x%x\n", trigger);
+	pr_debug("pcm_oss: trigger = 0x%x\n", trigger);
 #endif
 	
 	psubstream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK];
-- 
2.34.1

[PATCH 4.19 106/239] char/mwave: Adjust io port register size

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit f5912cc19acd7c24b2dbf65a6340bf194244f085 ]

Using MKWORD() on a byte-sized variable results in OOB read. Expand the
size of the reserved area so both MKWORD and MKBYTE continue to work
without overflow. Silences this warning on a -Warray-bounds build:

drivers/char/mwave/3780i.h:346:22: error: array subscript 'short unsigned int[0]' is partly outside array bounds of 'DSP_ISA_SLAVE_CONTROL[1]' [-Werror=array-bounds]
  346 | #define MKWORD(var) (*((unsigned short *)(&var)))
      |                     ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/char/mwave/3780i.h:356:40: note: in definition of macro 'OutWordDsp'
  356 | #define OutWordDsp(index,value)   outw(value,usDspBaseIO+index)
      |                                        ^~~~~
drivers/char/mwave/3780i.c:373:41: note: in expansion of macro 'MKWORD'
  373 |         OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
      |                                         ^~~~~~
drivers/char/mwave/3780i.c:358:31: note: while referencing 'rSlaveControl'
  358 |         DSP_ISA_SLAVE_CONTROL rSlaveControl;
      |                               ^~~~~~~~~~~~~

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211203084206.3104326-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/mwave/3780i.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/mwave/3780i.h b/drivers/char/mwave/3780i.h
index 9ccb6b270b071..95164246afd1a 100644
--- a/drivers/char/mwave/3780i.h
+++ b/drivers/char/mwave/3780i.h
@@ -68,7 +68,7 @@ typedef struct {
 	unsigned char ClockControl:1;	/* RW: Clock control: 0=normal, 1=stop 3780i clocks */
 	unsigned char SoftReset:1;	/* RW: Soft reset 0=normal, 1=soft reset active */
 	unsigned char ConfigMode:1;	/* RW: Configuration mode, 0=normal, 1=config mode */
-	unsigned char Reserved:5;	/* 0: Reserved */
+	unsigned short Reserved:13;	/* 0: Reserved */
 } DSP_ISA_SLAVE_CONTROL;
 
 
-- 
2.34.1

[PATCH 4.19 107/239] uio: uio_dmem_genirq: Catch the Exception

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit eec91694f927d1026974444eb6a3adccd4f1cbc2 ]

The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.

Fixes: 0a0c3b5a24bd ("Add new uio device for dynamic memory allocation")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211204000326.1592687-1-jiasheng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/uio/uio_dmem_genirq.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
index a00b4aee6c799..a31b9d5260ca0 100644
--- a/drivers/uio/uio_dmem_genirq.c
+++ b/drivers/uio/uio_dmem_genirq.c
@@ -194,7 +194,11 @@ static int uio_dmem_genirq_probe(struct platform_device *pdev)
 		goto bad0;
 	}
 
-	dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(&pdev->dev, "DMA enable failed\n");
+		return ret;
+	}
 
 	priv->uioinfo = uioinfo;
 	spin_lock_init(&priv->lock);
-- 
2.34.1

[PATCH 4.19 108/239] iommu/io-pgtable-arm: Fix table descriptor paddr formatting

[Greg Kroah-Hartman]

From: Hector Martin <marcan@marcan.st>

[ Upstream commit 9abe2ac834851a7d0b0756e295cf7a292c45ca53 ]

Table descriptors were being installed without properly formatting the
address using paddr_to_iopte, which does not match up with the
iopte_deref in __arm_lpae_map. This is incorrect for the LPAE pte
format, as it does not handle the high bits properly.

This was found on Apple T6000 DARTs, which require a new pte format
(different shift); adding support for that to
paddr_to_iopte/iopte_to_paddr caused it to break badly, as even <48-bit
addresses would end up incorrect in that case.

Fixes: 6c89928ff7a0 ("iommu/io-pgtable-arm: Support 52-bit physical address")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20211120031343.88034-1-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/io-pgtable-arm.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
index 2f79efd16a052..4bd2dd70acaec 100644
--- a/drivers/iommu/io-pgtable-arm.c
+++ b/drivers/iommu/io-pgtable-arm.c
@@ -346,11 +346,12 @@ static int arm_lpae_init_pte(struct arm_lpae_io_pgtable *data,
 static arm_lpae_iopte arm_lpae_install_table(arm_lpae_iopte *table,
 					     arm_lpae_iopte *ptep,
 					     arm_lpae_iopte curr,
-					     struct io_pgtable_cfg *cfg)
+					     struct arm_lpae_io_pgtable *data)
 {
 	arm_lpae_iopte old, new;
+	struct io_pgtable_cfg *cfg = &data->iop.cfg;
 
-	new = __pa(table) | ARM_LPAE_PTE_TYPE_TABLE;
+	new = paddr_to_iopte(__pa(table), data) | ARM_LPAE_PTE_TYPE_TABLE;
 	if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS)
 		new |= ARM_LPAE_PTE_NSTABLE;
 
@@ -402,7 +403,7 @@ static int __arm_lpae_map(struct arm_lpae_io_pgtable *data, unsigned long iova,
 		if (!cptep)
 			return -ENOMEM;
 
-		pte = arm_lpae_install_table(cptep, ptep, 0, cfg);
+		pte = arm_lpae_install_table(cptep, ptep, 0, data);
 		if (pte)
 			__arm_lpae_free_pages(cptep, tblsz, cfg);
 	} else if (!(cfg->quirks & IO_PGTABLE_QUIRK_NO_DMA) &&
@@ -562,7 +563,7 @@ static size_t arm_lpae_split_blk_unmap(struct arm_lpae_io_pgtable *data,
 		__arm_lpae_init_pte(data, blk_paddr, pte, lvl, &tablep[i]);
 	}
 
-	pte = arm_lpae_install_table(tablep, ptep, blk_pte, cfg);
+	pte = arm_lpae_install_table(tablep, ptep, blk_pte, data);
 	if (pte != blk_pte) {
 		__arm_lpae_free_pages(tablep, tablesz, cfg);
 		/*
-- 
2.34.1

[PATCH 4.19 109/239] scsi: ufs: Fix race conditions related to driver data

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 21ad0e49085deb22c094f91f9da57319a97188e4 ]

The driver data pointer must be set before any callbacks are registered
that use that pointer. Hence move the initialization of that pointer from
after the ufshcd_init() call to inside ufshcd_init().

Link: https://lore.kernel.org/r/20211203231950.193369-7-bvanassche@acm.org
Fixes: 3b1d05807a9a ("[SCSI] ufs: Segregate PCI Specific Code")
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/tc-dwc-g210-pci.c | 1 -
 drivers/scsi/ufs/ufshcd-pltfrm.c   | 2 --
 drivers/scsi/ufs/ufshcd.c          | 7 +++++++
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/scsi/ufs/tc-dwc-g210-pci.c
index 2f41722a8c28d..2c6cb7f6b61a6 100644
--- a/drivers/scsi/ufs/tc-dwc-g210-pci.c
+++ b/drivers/scsi/ufs/tc-dwc-g210-pci.c
@@ -138,7 +138,6 @@ tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return err;
 	}
 
-	pci_set_drvdata(pdev, hba);
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_allow(&pdev->dev);
 
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 30c22e16b1e34..57985841a879e 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -348,8 +348,6 @@ int ufshcd_pltfrm_init(struct platform_device *pdev,
 		goto dealloc_host;
 	}
 
-	platform_set_drvdata(pdev, hba);
-
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b18430efb00fb..fee1989e23f01 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8046,6 +8046,13 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	struct Scsi_Host *host = hba->host;
 	struct device *dev = hba->dev;
 
+	/*
+	 * dev_set_drvdata() must be called before any callbacks are registered
+	 * that use dev_get_drvdata() (frequency scaling, clock scaling, hwmon,
+	 * sysfs).
+	 */
+	dev_set_drvdata(dev, hba);
+
 	if (!mmio_base) {
 		dev_err(hba->dev,
 		"Invalid memory reference for mmio_base is NULL\n");
-- 
2.34.1

[PATCH 4.19 110/239] RDMA/core: Let ib_find_gid() continue search even after empty entry

[Greg Kroah-Hartman]

From: Avihai Horon <avihaih@nvidia.com>

[ Upstream commit 483d805191a23191f8294bbf9b4e94836f5d92e4 ]

Currently, ib_find_gid() will stop searching after encountering the first
empty GID table entry. This behavior is wrong since neither IB nor RoCE
spec enforce tightly packed GID tables.

For example, when a valid GID entry exists at index N, and if a GID entry
is empty at index N-1, ib_find_gid() will fail to find the valid entry.

Fix it by making ib_find_gid() continue searching even after encountering
missing entries.

Fixes: 5eb620c81ce3 ("IB/core: Add helpers for uncached GID and P_Key searches")
Link: https://lore.kernel.org/r/e55d331b96cecfc2cf19803d16e7109ea966882d.1639055490.git.leonro@nvidia.com
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/device.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index 6a585c3e21923..ffd0f43e2129f 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -1039,7 +1039,8 @@ int ib_find_gid(struct ib_device *device, union ib_gid *gid,
 		for (i = 0; i < device->port_immutable[port].gid_tbl_len; ++i) {
 			ret = rdma_query_gid(device, port, i, &tmp_gid);
 			if (ret)
-				return ret;
+				continue;
+
 			if (!memcmp(&tmp_gid, gid, sizeof *gid)) {
 				*port_num = port;
 				if (index)
-- 
2.34.1

[PATCH 4.19 111/239] ASoC: rt5663: Handle device_property_read_u32_array error codes

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 2167c0b205960607fb136b4bb3c556a62be1569a ]

The return value of device_property_read_u32_array() is not always 0.
To catch the exception in case that devm_kzalloc failed and the
rt5663->imp_table was NULL, which caused the failure of
device_property_read_u32_array.

Fixes: 450f0f6a8fb4 ("ASoC: rt5663: Add the manual offset field to compensate the DC offset")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211215031550.70702-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5663.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index 9bd24ad422407..dd77f131ce6c5 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -3446,6 +3446,7 @@ static void rt5663_calibrate(struct rt5663_priv *rt5663)
 static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev)
 {
 	int table_size;
+	int ret;
 
 	device_property_read_u32(dev, "realtek,dc_offset_l_manual",
 		&rt5663->pdata.dc_offset_l_manual);
@@ -3462,9 +3463,11 @@ static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev)
 		table_size = sizeof(struct impedance_mapping_table) *
 			rt5663->pdata.impedance_sensing_num;
 		rt5663->imp_table = devm_kzalloc(dev, table_size, GFP_KERNEL);
-		device_property_read_u32_array(dev,
+		ret = device_property_read_u32_array(dev,
 			"realtek,impedance_sensing_table",
 			(u32 *)rt5663->imp_table, table_size);
+		if (ret)
+			return ret;
 	}
 
 	return 0;
@@ -3489,8 +3492,11 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
 
 	if (pdata)
 		rt5663->pdata = *pdata;
-	else
-		rt5663_parse_dp(rt5663, &i2c->dev);
+	else {
+		ret = rt5663_parse_dp(rt5663, &i2c->dev);
+		if (ret)
+			return ret;
+	}
 
 	regmap = devm_regmap_init_i2c(i2c, &temp_regmap);
 	if (IS_ERR(regmap)) {
-- 
2.34.1

[PATCH 4.19 112/239] dmaengine: pxa/mmp: stop referencing config->slave_id

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 134c37fa250a87a7e77c80a7c59ae16c462e46e0 ]

The last driver referencing the slave_id on Marvell PXA and MMP platforms
was the SPI driver, but this stopped doing so a long time ago, so the
TODO from the earlier patch can no be removed.

Fixes: b729bf34535e ("spi/pxa2xx: Don't use slave_id of dma_slave_config")
Fixes: 13b3006b8ebd ("dma: mmp_pdma: add filter function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-7-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/mmp_pdma.c | 6 ------
 drivers/dma/pxa_dma.c  | 7 -------
 2 files changed, 13 deletions(-)

diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index eb3a1f42ab065..e8b2d3e31de80 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -722,12 +722,6 @@ static int mmp_pdma_config(struct dma_chan *dchan,
 
 	chan->dir = cfg->direction;
 	chan->dev_addr = addr;
-	/* FIXME: drivers should be ported over to use the filter
-	 * function. Once that's done, the following two lines can
-	 * be removed.
-	 */
-	if (cfg->slave_id)
-		chan->drcmr = cfg->slave_id;
 
 	return 0;
 }
diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index b31c28b67ad3e..c54986902b9d2 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -960,13 +960,6 @@ static void pxad_get_config(struct pxad_chan *chan,
 		*dcmd |= PXA_DCMD_BURST16;
 	else if (maxburst == 32)
 		*dcmd |= PXA_DCMD_BURST32;
-
-	/* FIXME: drivers should be ported over to use the filter
-	 * function. Once that's done, the following two lines can
-	 * be removed.
-	 */
-	if (chan->cfg.slave_id)
-		chan->drcmr = chan->cfg.slave_id;
 }
 
 static struct dma_async_tx_descriptor *
-- 
2.34.1

[PATCH 4.19 113/239] iommu/iova: Fix race between FQ timeout and teardown

[Greg Kroah-Hartman]

From: Xiongfeng Wang <wangxiongfeng2@huawei.com>

[ Upstream commit d7061627d701c90e1cac1e1e60c45292f64f3470 ]

It turns out to be possible for hotplugging out a device to reach the
stage of tearing down the device's group and default domain before the
domain's flush queue has drained naturally. At this point, it is then
possible for the timeout to expire just before the del_timer() call
in free_iova_flush_queue(), such that we then proceed to free the FQ
resources while fq_flush_timeout() is still accessing them on another
CPU. Crashes due to this have been observed in the wild while removing
NVMe devices.

Close the race window by using del_timer_sync() to safely wait for any
active timeout handler to finish before we start to free things. We
already avoid any locking in free_iova_flush_queue() since the FQ is
supposed to be inactive anyway, so the potential deadlock scenario does
not apply.

Fixes: 9a005a800ae8 ("iommu/iova: Add flush timer")
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ rm: rewrite commit message ]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0a365e5b07f14b7344677ad6a9a734966a8422ce.1639753638.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/iova.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index ce5cd05253db9..fdd68d8e8adc6 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -75,8 +75,7 @@ static void free_iova_flush_queue(struct iova_domain *iovad)
 	if (!has_iova_flush_queue(iovad))
 		return;
 
-	if (timer_pending(&iovad->fq_timer))
-		del_timer(&iovad->fq_timer);
+	del_timer_sync(&iovad->fq_timer);
 
 	fq_destroy_all_entries(iovad);
 
-- 
2.34.1

[PATCH 4.19 114/239] ASoC: mediatek: Check for error clk pointer

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 9de2b9286a6dd16966959b3cb34fc2ddfd39213e ]

Yes, you are right and now the return code depending on the
init_clks().

Fixes: 6078c651947a ("soc: mediatek: Refine scpsys to support multiple platform")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211222015157.1025853-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/mediatek/mtk-scpsys.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index ef54f1638d207..01fcad7c8fae8 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -341,12 +341,17 @@ out:
 	return ret;
 }
 
-static void init_clks(struct platform_device *pdev, struct clk **clk)
+static int init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
 
-	for (i = CLK_NONE + 1; i < CLK_MAX; i++)
+	for (i = CLK_NONE + 1; i < CLK_MAX; i++) {
 		clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
+		if (IS_ERR(clk[i]))
+			return PTR_ERR(clk[i]);
+	}
+
+	return 0;
 }
 
 static struct scp *init_scp(struct platform_device *pdev,
@@ -356,7 +361,7 @@ static struct scp *init_scp(struct platform_device *pdev,
 {
 	struct genpd_onecell_data *pd_data;
 	struct resource *res;
-	int i, j;
+	int i, j, ret;
 	struct scp *scp;
 	struct clk *clk[CLK_MAX];
 
@@ -411,7 +416,9 @@ static struct scp *init_scp(struct platform_device *pdev,
 
 	pd_data->num_domains = num;
 
-	init_clks(pdev, clk);
+	ret = init_clks(pdev, clk);
+	if (ret)
+		return ERR_PTR(ret);
 
 	for (i = 0; i < num; i++) {
 		struct scp_domain *scpd = &scp->domains[i];
-- 
2.34.1

[PATCH 4.19 115/239] ASoC: samsung: idma: Check of ioremap return value

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 3ecb46755eb85456b459a1a9f952c52986bce8ec ]

Because of the potential failure of the ioremap(), the buf->area could
be NULL.
Therefore, we need to check it and return -ENOMEM in order to transfer
the error.

Fixes: f09aecd50f39 ("ASoC: SAMSUNG: Add I2S0 internal dma driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211228034026.1659385-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/samsung/idma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/samsung/idma.c b/sound/soc/samsung/idma.c
index b1f09b942410d..e397f5e10e33e 100644
--- a/sound/soc/samsung/idma.c
+++ b/sound/soc/samsung/idma.c
@@ -369,6 +369,8 @@ static int preallocate_idma_buffer(struct snd_pcm *pcm, int stream)
 	buf->addr = idma.lp_tx_addr;
 	buf->bytes = idma_hardware.buffer_bytes_max;
 	buf->area = (unsigned char * __force)ioremap(buf->addr, buf->bytes);
+	if (!buf->area)
+		return -ENOMEM;
 
 	return 0;
 }
-- 
2.34.1

[PATCH 4.19 116/239] misc: lattice-ecp3-config: Fix task hung when firmware load failed

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit fcee5ce50bdb21116711e38635e3865594af907e ]

When firmware load failed, kernel report task hung as follows:

INFO: task xrun:5191 blocked for more than 147 seconds.
      Tainted: G        W         5.16.0-rc5-next-20211220+ #11
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:xrun            state:D stack:    0 pid: 5191 ppid:   270 flags:0x00000004
Call Trace:
 __schedule+0xc12/0x4b50 kernel/sched/core.c:4986
 schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1)
 schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857
 wait_for_completion+0x181/0x290 kernel/sched/completion.c:85
 lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221
 spi_remove+0x72/0xb0 drivers/spi/spi.c:409

lattice_ecp3_remove() wait for signals from firmware loading, but when
load failed, firmware_load() does not send this signal. This cause
device remove hung. Fix it by sending signal even if load failed.

Fixes: 781551df57c7 ("misc: Add Lattice ECP3 FPGA configuration via SPI")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20211228125522.3122284-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/lattice-ecp3-config.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c
index 626fdcaf25101..645d26536114f 100644
--- a/drivers/misc/lattice-ecp3-config.c
+++ b/drivers/misc/lattice-ecp3-config.c
@@ -81,12 +81,12 @@ static void firmware_load(const struct firmware *fw, void *context)
 
 	if (fw == NULL) {
 		dev_err(&spi->dev, "Cannot load firmware, aborting\n");
-		return;
+		goto out;
 	}
 
 	if (fw->size == 0) {
 		dev_err(&spi->dev, "Error: Firmware size is 0!\n");
-		return;
+		goto out;
 	}
 
 	/* Fill dummy data (24 stuffing bits for commands) */
@@ -108,7 +108,7 @@ static void firmware_load(const struct firmware *fw, void *context)
 		dev_err(&spi->dev,
 			"Error: No supported FPGA detected (JEDEC_ID=%08x)!\n",
 			jedec_id);
-		return;
+		goto out;
 	}
 
 	dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name);
@@ -121,7 +121,7 @@ static void firmware_load(const struct firmware *fw, void *context)
 	buffer = kzalloc(fw->size + 8, GFP_KERNEL);
 	if (!buffer) {
 		dev_err(&spi->dev, "Error: Can't allocate memory!\n");
-		return;
+		goto out;
 	}
 
 	/*
@@ -160,7 +160,7 @@ static void firmware_load(const struct firmware *fw, void *context)
 			"Error: Timeout waiting for FPGA to clear (status=%08x)!\n",
 			status);
 		kfree(buffer);
-		return;
+		goto out;
 	}
 
 	dev_info(&spi->dev, "Configuring the FPGA...\n");
@@ -186,7 +186,7 @@ static void firmware_load(const struct firmware *fw, void *context)
 	release_firmware(fw);
 
 	kfree(buffer);
-
+out:
 	complete(&data->fw_loaded);
 }
 
-- 
2.34.1

[PATCH 4.19 117/239] mips: lantiq: add support for clk_set_parent()

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 76f66dfd60dc5d2f9dec22d99091fea1035c5d03 ]

Provide a simple implementation of clk_set_parent() in the lantiq
subarch so that callers of it will build without errors.

Fixes these build errors:

ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!

Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
--to=linux-mips@vger.kernel.org --cc="John Crispin <john@phrozen.org>" --cc="Jonathan Cameron <jic23@kernel.org>" --cc="Russell King <linux@armlinux.org.uk>" --cc="Andy Shevchenko <andy.shevchenko@gmail.com>" --cc=alsa-devel@alsa-project.org --to="Thomas Bogendoerfer <tsbogend@alpha.franken.de>"
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lantiq/clk.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index a8e309dcd38d7..f5fab99d1751c 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -166,6 +166,12 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
 static inline u32 get_counter_resolution(void)
 {
 	u32 res;
-- 
2.34.1

[PATCH 4.19 118/239] mips: bcm63xx: add support for clk_set_parent()

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 6f03055d508ff4feb8db02ba3df9303a1db8d381 ]

The MIPS BMC63XX subarch does not provide/support clk_set_parent().
This causes build errors in a few drivers, so add a simple implementation
of that function so that callers of it will build without errors.

Fixes these build errors:

ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/bcm63xx/clk.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index aba6e2d6a736c..dcfa0ea912fe1 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -387,6 +387,12 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
 unsigned long clk_get_rate(struct clk *clk)
 {
 	if (!clk)
-- 
2.34.1

[PATCH 4.19 119/239] RDMA/cxgb4: Set queue pair state when being queried

[Greg Kroah-Hartman]

From: Kamal Heib <kamalheib1@gmail.com>

[ Upstream commit e375b9c92985e409c4bb95dd43d34915ea7f5e28 ]

The API for ib_query_qp requires the driver to set cur_qp_state on return,
add the missing set.

Fixes: 67bbc05512d8 ("RDMA/cxgb4: Add query_qp support")
Link: https://lore.kernel.org/r/20211220152530.60399-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/cxgb4/qp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 20e3128f59b14..aa48627fc0bfa 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -2483,6 +2483,7 @@ int c4iw_ib_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 	memset(attr, 0, sizeof *attr);
 	memset(init_attr, 0, sizeof *init_attr);
 	attr->qp_state = to_ib_qp_state(qhp->attr.state);
+	attr->cur_qp_state = to_ib_qp_state(qhp->attr.state);
 	init_attr->cap.max_send_wr = qhp->attr.sq_num_entries;
 	init_attr->cap.max_recv_wr = qhp->attr.rq_num_entries;
 	init_attr->cap.max_send_sge = qhp->attr.sq_max_sges;
-- 
2.34.1

[PATCH 4.19 120/239] Bluetooth: Fix debugfs entry leak in hci_register_dev()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 5a4bb6a8e981d3d0d492aa38412ee80b21033177 ]

Fault injection test report debugfs entry leak as follows:

debugfs: Directory 'hci0' with parent 'bluetooth' already present!

When register_pm_notifier() failed in hci_register_dev(), the debugfs
create by debugfs_create_dir() do not removed in the error handing path.

Add the remove debugfs code to fix it.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 26acacb2fa95f..a5755e0645439 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3263,6 +3263,7 @@ int hci_register_dev(struct hci_dev *hdev)
 	return id;
 
 err_wqueue:
+	debugfs_remove_recursive(hdev->debugfs);
 	destroy_workqueue(hdev->workqueue);
 	destroy_workqueue(hdev->req_workqueue);
 err:
-- 
2.34.1

[PATCH 4.19 121/239] fs: dlm: filter user dlm messages for kernel locks

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 6c2e3bf68f3e5e5a647aa52be246d5f552d7496d ]

This patch fixes the following crash by receiving a invalid message:

[  160.672220] ==================================================================
[  160.676206] BUG: KASAN: user-memory-access in dlm_user_add_ast+0xc3/0x370
[  160.679659] Read of size 8 at addr 00000000deadbeef by task kworker/u32:13/319
[  160.681447]
[  160.681824] CPU: 10 PID: 319 Comm: kworker/u32:13 Not tainted 5.14.0-rc2+ #399
[  160.683472] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.14.0-1.module+el8.6.0+12648+6ede71a5 04/01/2014
[  160.685574] Workqueue: dlm_recv process_recv_sockets
[  160.686721] Call Trace:
[  160.687310]  dump_stack_lvl+0x56/0x6f
[  160.688169]  ? dlm_user_add_ast+0xc3/0x370
[  160.689116]  kasan_report.cold.14+0x116/0x11b
[  160.690138]  ? dlm_user_add_ast+0xc3/0x370
[  160.690832]  dlm_user_add_ast+0xc3/0x370
[  160.691502]  _receive_unlock_reply+0x103/0x170
[  160.692241]  _receive_message+0x11df/0x1ec0
[  160.692926]  ? rcu_read_lock_sched_held+0xa1/0xd0
[  160.693700]  ? rcu_read_lock_bh_held+0xb0/0xb0
[  160.694427]  ? lock_acquire+0x175/0x400
[  160.695058]  ? do_purge.isra.51+0x200/0x200
[  160.695744]  ? lock_acquired+0x360/0x5d0
[  160.696400]  ? lock_contended+0x6a0/0x6a0
[  160.697055]  ? lock_release+0x21d/0x5e0
[  160.697686]  ? lock_is_held_type+0xe0/0x110
[  160.698352]  ? lock_is_held_type+0xe0/0x110
[  160.699026]  ? ___might_sleep+0x1cc/0x1e0
[  160.699698]  ? dlm_wait_requestqueue+0x94/0x140
[  160.700451]  ? dlm_process_requestqueue+0x240/0x240
[  160.701249]  ? down_write_killable+0x2b0/0x2b0
[  160.701988]  ? do_raw_spin_unlock+0xa2/0x130
[  160.702690]  dlm_receive_buffer+0x1a5/0x210
[  160.703385]  dlm_process_incoming_buffer+0x726/0x9f0
[  160.704210]  receive_from_sock+0x1c0/0x3b0
[  160.704886]  ? dlm_tcp_shutdown+0x30/0x30
[  160.705561]  ? lock_acquire+0x175/0x400
[  160.706197]  ? rcu_read_lock_sched_held+0xa1/0xd0
[  160.706941]  ? rcu_read_lock_bh_held+0xb0/0xb0
[  160.707681]  process_recv_sockets+0x32/0x40
[  160.708366]  process_one_work+0x55e/0xad0
[  160.709045]  ? pwq_dec_nr_in_flight+0x110/0x110
[  160.709820]  worker_thread+0x65/0x5e0
[  160.710423]  ? process_one_work+0xad0/0xad0
[  160.711087]  kthread+0x1ed/0x220
[  160.711628]  ? set_kthread_struct+0x80/0x80
[  160.712314]  ret_from_fork+0x22/0x30

The issue is that we received a DLM message for a user lock but the
destination lock is a kernel lock. Note that the address which is trying
to derefence is 00000000deadbeef, which is in a kernel lock
lkb->lkb_astparam, this field should never be derefenced by the DLM
kernel stack. In case of a user lock lkb->lkb_astparam is lkb->lkb_ua
(memory is shared by a union field). The struct lkb_ua will be handled
by the DLM kernel stack but on a kernel lock it will contain invalid
data and ends in most likely crashing the kernel.

It can be reproduced with two cluster nodes.

node 2:
dlm_tool join test
echo "862 fooobaar 1 2 1" > /sys/kernel/debug/dlm/test_locks
echo "862 3 1" > /sys/kernel/debug/dlm/test_waiters

node 1:
dlm_tool join test

python:
foo = DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0x77222027, \
          m_type=7, m_flags=0x1, m_remid=0x862, m_result=0xFFFEFFFE)
newFile = open("/sys/kernel/debug/dlm/comms/2/rawmsg", "wb")
newFile.write(bytes(foo))

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/dlm/lock.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index a928ba008d7d7..26a4847efccca 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -3977,6 +3977,14 @@ static int validate_message(struct dlm_lkb *lkb, struct dlm_message *ms)
 	int from = ms->m_header.h_nodeid;
 	int error = 0;
 
+	/* currently mixing of user/kernel locks are not supported */
+	if (ms->m_flags & DLM_IFL_USER && ~lkb->lkb_flags & DLM_IFL_USER) {
+		log_error(lkb->lkb_resource->res_ls,
+			  "got user dlm message for a kernel lock");
+		error = -EINVAL;
+		goto out;
+	}
+
 	switch (ms->m_type) {
 	case DLM_MSG_CONVERT:
 	case DLM_MSG_UNLOCK:
@@ -4005,6 +4013,7 @@ static int validate_message(struct dlm_lkb *lkb, struct dlm_message *ms)
 		error = -EINVAL;
 	}
 
+out:
 	if (error)
 		log_error(lkb->lkb_resource->res_ls,
 			  "ignore invalid message %d from %d %x %x %x %d",
-- 
2.34.1

[PATCH 4.19 122/239] ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply

[Greg Kroah-Hartman]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit ae80b6033834342601e99f74f6a62ff5092b1cee ]

Unexpected WDCMSG_TARGET_START replay can lead to null-ptr-deref
when ar->tx_cmd->odata is NULL. The patch adds a null check to
prevent such case.

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
 ar5523_cmd+0x46a/0x581 [ar5523]
 ar5523_probe.cold+0x1b7/0x18da [ar5523]
 ? ar5523_cmd_rx_cb+0x7a0/0x7a0 [ar5523]
 ? __pm_runtime_set_status+0x54a/0x8f0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? pm_runtime_barrier+0x220/0x220
 ? __pm_runtime_resume+0xb1/0xf0
 usb_probe_interface+0x25b/0x710
 really_probe+0x209/0x5d0
 driver_probe_device+0xc6/0x1b0
 device_driver_attach+0xe2/0x120

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START,
I got the null-ptr-deref bug. I believe the bug is triggerable whenever
cmd->odata is NULL. After patching, I tested with the same input and no
longer see the KASAN report.

This was NOT tested on a real device.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXsmPQ3awHFLuAj2@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ar5523/ar5523.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 4c57e79e5779a..58e189ec672f9 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -153,6 +153,10 @@ static void ar5523_cmd_rx_cb(struct urb *urb)
 			ar5523_err(ar, "Invalid reply to WDCMSG_TARGET_START");
 			return;
 		}
+		if (!cmd->odata) {
+			ar5523_err(ar, "Unexpected WDCMSG_TARGET_START reply");
+			return;
+		}
 		memcpy(cmd->odata, hdr + 1, sizeof(u32));
 		cmd->olen = sizeof(u32);
 		cmd->res = 0;
-- 
2.34.1

[PATCH 4.19 123/239] drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR

[Greg Kroah-Hartman]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 1d2271d2fb85e54bfc9630a6c30ac0feb9ffb983 ]

There have been reports of the WFI timing out on some boards, and a
patch was proposed to just remove it.  This stuff is rather fragile,
and I believe the WFI might be needed with our FW prior to GM200.

However, we probably should not be touching PMU during init on GPUs
where we depend on NVIDIA FW, outside of limited circumstances, so
this should be a somewhat safer change that achieves the desired
result.

Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/nouveau/nvkm/subdev/pmu/base.c    | 37 +++++++++++--------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
index ce70a193caa7f..8cf3d1b4662de 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
@@ -70,20 +70,13 @@ nvkm_pmu_fini(struct nvkm_subdev *subdev, bool suspend)
 	return 0;
 }
 
-static int
+static void
 nvkm_pmu_reset(struct nvkm_pmu *pmu)
 {
 	struct nvkm_device *device = pmu->subdev.device;
 
 	if (!pmu->func->enabled(pmu))
-		return 0;
-
-	/* Inhibit interrupts, and wait for idle. */
-	nvkm_wr32(device, 0x10a014, 0x0000ffff);
-	nvkm_msec(device, 2000,
-		if (!nvkm_rd32(device, 0x10a04c))
-			break;
-	);
+		return;
 
 	/* Reset. */
 	if (pmu->func->reset)
@@ -94,25 +87,37 @@ nvkm_pmu_reset(struct nvkm_pmu *pmu)
 		if (!(nvkm_rd32(device, 0x10a10c) & 0x00000006))
 			break;
 	);
-
-	return 0;
 }
 
 static int
 nvkm_pmu_preinit(struct nvkm_subdev *subdev)
 {
 	struct nvkm_pmu *pmu = nvkm_pmu(subdev);
-	return nvkm_pmu_reset(pmu);
+	nvkm_pmu_reset(pmu);
+	return 0;
 }
 
 static int
 nvkm_pmu_init(struct nvkm_subdev *subdev)
 {
 	struct nvkm_pmu *pmu = nvkm_pmu(subdev);
-	int ret = nvkm_pmu_reset(pmu);
-	if (ret == 0 && pmu->func->init)
-		ret = pmu->func->init(pmu);
-	return ret;
+	struct nvkm_device *device = pmu->subdev.device;
+
+	if (!pmu->func->init)
+		return 0;
+
+	if (pmu->func->enabled(pmu)) {
+		/* Inhibit interrupts, and wait for idle. */
+		nvkm_wr32(device, 0x10a014, 0x0000ffff);
+		nvkm_msec(device, 2000,
+			if (!nvkm_rd32(device, 0x10a04c))
+				break;
+		);
+
+		nvkm_pmu_reset(pmu);
+	}
+
+	return pmu->func->init(pmu);
 }
 
 static int
-- 
2.34.1

[PATCH 4.19 124/239] usb: gadget: f_fs: Use stream_open() for endpoint files

[Greg Kroah-Hartman]

From: Pavankumar Kondeti <quic_pkondeti@quicinc.com>

[ Upstream commit c76ef96fc00eb398c8fc836b0eb2f82bcc619dc7 ]

Function fs endpoint file operations are synchronized via an interruptible
mutex wait. However we see threads that do ep file operations concurrently
are getting blocked for the mutex lock in __fdget_pos(). This is an
uninterruptible wait and we see hung task warnings and kernel panic
if hung_task_panic systcl is enabled if host does not send/receive
the data for long time.

The reason for threads getting blocked in __fdget_pos() is due to
the file position protection introduced by the commit 9c225f2655e3
("vfs: atomic f_pos accesses as per POSIX"). Since function fs
endpoint files does not have the notion of the file position, switch
to the stream mode. This will bypass the file position mutex and
threads will be blocked in interruptible state for the function fs
mutex.

It should not affects user space as we are only changing the task state
changes the task state from UNINTERRUPTIBLE to INTERRUPTIBLE while waiting
for the USB transfers to be finished. However there is a slight change to
the O_NONBLOCK behavior. Earlier threads that are using O_NONBLOCK are also
getting blocked inside fdget_pos(). Now they reach to function fs and error
code is returned. The non blocking behavior is actually honoured now.

Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Link: https://lore.kernel.org/r/1636712682-1226-1-git-send-email-quic_pkondeti@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_fs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index f070082124742..9271a7009a00f 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -607,7 +607,7 @@ static int ffs_ep0_open(struct inode *inode, struct file *file)
 	file->private_data = ffs;
 	ffs_data_opened(ffs);
 
-	return 0;
+	return stream_open(inode, file);
 }
 
 static int ffs_ep0_release(struct inode *inode, struct file *file)
@@ -1071,7 +1071,7 @@ ffs_epfile_open(struct inode *inode, struct file *file)
 	file->private_data = epfile;
 	ffs_data_opened(epfile->ffs);
 
-	return 0;
+	return stream_open(inode, file);
 }
 
 static int ffs_aio_cancel(struct kiocb *kiocb)
-- 
2.34.1

[PATCH 4.19 125/239] HID: apple: Do not reset quirks when the Fn key is not found

[Greg Kroah-Hartman]

From: José Expósito <jose.exposito89@gmail.com>

[ Upstream commit a5fe7864d8ada170f19cc47d176bf8260ffb4263 ]

When a keyboard without a function key is detected, instead of removing
all quirks, remove only the APPLE_HAS_FN quirk.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-apple.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 4e3dd3f55a963..80ecbf14d3c82 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -392,7 +392,7 @@ static int apple_input_configured(struct hid_device *hdev,
 
 	if ((asc->quirks & APPLE_HAS_FN) && !asc->fn_found) {
 		hid_info(hdev, "Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling\n");
-		asc->quirks = 0;
+		asc->quirks &= ~APPLE_HAS_FN;
 	}
 
 	return 0;
-- 
2.34.1

[PATCH 4.19 126/239] media: b2c2: Add missing check in flexcop_pci_isr:

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit b13203032e679674c7c518f52a7ec0801ca3a829 ]

A out-of-bounds bug can be triggered by an interrupt, the reason for
this bug is the lack of checking of register values.

In flexcop_pci_isr, the driver reads value from a register and uses it as
a dma address. Finally, this address will be passed to the count parameter
of find_next_packet. If this value is larger than the size of dma, the
index of buffer will be out-of-bounds.

Fix this by adding a check after reading the value of the register.

The following KASAN report reveals it:

BUG: KASAN: slab-out-of-bounds in find_next_packet
drivers/media/dvb-core/dvb_demux.c:528 [inline]
BUG: KASAN: slab-out-of-bounds in _dvb_dmx_swfilter
drivers/media/dvb-core/dvb_demux.c:572 [inline]
BUG: KASAN: slab-out-of-bounds in dvb_dmx_swfilter+0x3fa/0x420
drivers/media/dvb-core/dvb_demux.c:603
Read of size 1 at addr ffff8880608c00a0 by task swapper/2/0

CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xec/0x156 lib/dump_stack.c:118
 print_address_description+0x78/0x290 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x25b/0x380 mm/kasan/report.c:412
 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:430
 find_next_packet drivers/media/dvb-core/dvb_demux.c:528 [inline]
 _dvb_dmx_swfilter drivers/media/dvb-core/dvb_demux.c:572 [inline]
 dvb_dmx_swfilter+0x3fa/0x420 drivers/media/dvb-core/dvb_demux.c:603
 flexcop_pass_dmx_data+0x2e/0x40 drivers/media/common/b2c2/flexcop.c:167
 flexcop_pci_isr+0x3d1/0x5d0 drivers/media/pci/b2c2/flexcop-pci.c:212
 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
 handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
 </IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 62 2f 8c 48 89 e5 e8 fb 31
e8 f8 8b 05 75 4f 8e 03 85 c0 7e 07 0f 00 2d 8a 61 66 00 fb f4 <5d> c3
90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde44c8 RCX: ffffffff88a11285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2f6200
RBP: ffff88806b71fcc8 R08: fffffbfff185ec40 R09: fffffbfff185ec40
R10: 0000000000000001 R11: fffffbfff185ec40 R12: 0000000000000002
R13: ffffffff8be9d6e0 R14: 0000000000000000 R15: 0000000000000000
 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
 default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
 cpuidle_idle_call kernel/sched/idle.c:153 [inline]
 do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243

Allocated by task 1:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:553
 kasan_slab_alloc+0x11/0x20 mm/kasan/kasan.c:490
 slab_post_alloc_hook mm/slab.h:445 [inline]
 slab_alloc_node mm/slub.c:2741 [inline]
 slab_alloc mm/slub.c:2749 [inline]
 kmem_cache_alloc+0xeb/0x280 mm/slub.c:2754
 kmem_cache_zalloc include/linux/slab.h:699 [inline]
 __kernfs_new_node+0xe2/0x6f0 fs/kernfs/dir.c:633
 kernfs_new_node+0x9a/0x120 fs/kernfs/dir.c:693
 __kernfs_create_file+0x5f/0x340 fs/kernfs/file.c:992
 sysfs_add_file_mode_ns+0x22a/0x4e0 fs/sysfs/file.c:306
 create_files fs/sysfs/group.c:63 [inline]
 internal_create_group+0x34e/0xc30 fs/sysfs/group.c:147
 sysfs_create_group fs/sysfs/group.c:173 [inline]
 sysfs_create_groups+0x9c/0x140 fs/sysfs/group.c:200
 driver_add_groups+0x3e/0x50 drivers/base/driver.c:129
 bus_add_driver+0x3a5/0x790 drivers/base/bus.c:684
 driver_register+0x1cd/0x410 drivers/base/driver.c:170
 __pci_register_driver+0x197/0x200 drivers/pci/pci-driver.c:1411
 cx88_audio_pci_driver_init+0x23/0x25 drivers/media/pci/cx88/cx88-alsa.c:
 1017
 do_one_initcall+0xe0/0x610 init/main.c:884
 do_initcall_level init/main.c:952 [inline]
 do_initcalls init/main.c:960 [inline]
 do_basic_setup init/main.c:978 [inline]
 kernel_init_freeable+0x4d0/0x592 init/main.c:1145
 kernel_init+0x18/0x190 init/main.c:1062
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415

Freed by task 0:
(stack is not available)

The buggy address belongs to the object at ffff8880608c0000
 which belongs to the cache kernfs_node_cache of size 160
The buggy address is located 0 bytes to the right of
 160-byte region [ffff8880608c0000, ffff8880608c00a0)
The buggy address belongs to the page:
page:ffffea0001823000 count:1 mapcount:0 mapping:ffff88806bed1e00
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 dead000000000100 dead000000000200 ffff88806bed1e00
raw: 0000000000000000 0000000000240024 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880608bff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880608c0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880608c0080: 00 00 00 00 fc fc fc fc fc fc fc fc 00 00 00 00
                               ^
 ffff8880608c0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880608c0180: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================

Link: https://lore.kernel.org/linux-media/1620723603-30912-1-git-send-email-zheyuma97@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/b2c2/flexcop-pci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/pci/b2c2/flexcop-pci.c b/drivers/media/pci/b2c2/flexcop-pci.c
index cc6527e355373..b7d8e34ffd5da 100644
--- a/drivers/media/pci/b2c2/flexcop-pci.c
+++ b/drivers/media/pci/b2c2/flexcop-pci.c
@@ -184,6 +184,8 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
 		dma_addr_t cur_addr =
 			fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
 		u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
+		if (cur_pos > fc_pci->dma[0].size * 2)
+			goto error;
 
 		deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
 				jiffies_to_usecs(jiffies - fc_pci->last_irq),
@@ -224,6 +226,7 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
 		ret = IRQ_NONE;
 	}
 
+error:
 	spin_unlock_irqrestore(&fc_pci->irq_lock, flags);
 	return ret;
 }
-- 
2.34.1

[PATCH 4.19 127/239] ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART

[Greg Kroah-Hartman]

From: Lukas Bulwahn <lukas.bulwahn@gmail.com>

[ Upstream commit b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784 ]

Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.

So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.

This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/Kconfig.debug            | 14 +++++++-------
 arch/arm/include/debug/imx-uart.h | 18 +++++++++---------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 01c760929c9e4..12a023c542e45 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -405,12 +405,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -1454,7 +1454,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1507,12 +1507,12 @@ config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index bce58e975ad1f..c750cc9876f6d 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -14,13 +14,6 @@
 #define IMX1_UART_BASE_ADDR(n)	IMX1_UART##n##_BASE_ADDR
 #define IMX1_UART_BASE(n)	IMX1_UART_BASE_ADDR(n)
 
-#define IMX21_UART1_BASE_ADDR	0x1000a000
-#define IMX21_UART2_BASE_ADDR	0x1000b000
-#define IMX21_UART3_BASE_ADDR	0x1000c000
-#define IMX21_UART4_BASE_ADDR	0x1000d000
-#define IMX21_UART_BASE_ADDR(n)	IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n)	IMX21_UART_BASE_ADDR(n)
-
 #define IMX25_UART1_BASE_ADDR	0x43f90000
 #define IMX25_UART2_BASE_ADDR	0x43f94000
 #define IMX25_UART3_BASE_ADDR	0x5000c000
@@ -29,6 +22,13 @@
 #define IMX25_UART_BASE_ADDR(n)	IMX25_UART##n##_BASE_ADDR
 #define IMX25_UART_BASE(n)	IMX25_UART_BASE_ADDR(n)
 
+#define IMX27_UART1_BASE_ADDR	0x1000a000
+#define IMX27_UART2_BASE_ADDR	0x1000b000
+#define IMX27_UART3_BASE_ADDR	0x1000c000
+#define IMX27_UART4_BASE_ADDR	0x1000d000
+#define IMX27_UART_BASE_ADDR(n)	IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n)	IMX27_UART_BASE_ADDR(n)
+
 #define IMX31_UART1_BASE_ADDR	0x43f90000
 #define IMX31_UART2_BASE_ADDR	0x43f94000
 #define IMX31_UART3_BASE_ADDR	0x5000c000
@@ -115,10 +115,10 @@
 
 #ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX21)
 #elif defined(CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX27)
 #elif defined(CONFIG_DEBUG_IMX31_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX31)
 #elif defined(CONFIG_DEBUG_IMX35_UART)
-- 
2.34.1

[PATCH 4.19 128/239] mlxsw: pci: Add shutdown method in PCI driver

[Greg Kroah-Hartman]

From: Danielle Ratson <danieller@nvidia.com>

[ Upstream commit c1020d3cf4752f61a6a413f632ea2ce2370e150d ]

On an arm64 platform with the Spectrum ASIC, after loading and executing
a new kernel via kexec, the following trace [1] is observed. This seems
to be caused by the fact that the device is not properly shutdown before
executing the new kernel.

Fix this by implementing a shutdown method which mirrors the remove
method, as recommended by the kexec maintainer [2][3].

[1]
BUG: Bad page state in process devlink pfn:22f73d
page:fffffe00089dcf40 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x2ffff00000000000()
raw: 2ffff00000000000 0000000000000000 ffffffff089d0201 0000000000000000
raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount
Modules linked in:
CPU: 1 PID: 16346 Comm: devlink Tainted: G B 5.8.0-rc6-custom-273020-gac6b365b1bf5 #44
Hardware name: Marvell Armada 7040 TX4810M (DT)
Call trace:
 dump_backtrace+0x0/0x1d0
 show_stack+0x1c/0x28
 dump_stack+0xbc/0x118
 bad_page+0xcc/0xf8
 check_free_page_bad+0x80/0x88
 __free_pages_ok+0x3f8/0x418
 __free_pages+0x38/0x60
 kmem_freepages+0x200/0x2a8
 slab_destroy+0x28/0x68
 slabs_destroy+0x60/0x90
 ___cache_free+0x1b4/0x358
 kfree+0xc0/0x1d0
 skb_free_head+0x2c/0x38
 skb_release_data+0x110/0x1a0
 skb_release_all+0x2c/0x38
 consume_skb+0x38/0x130
 __dev_kfree_skb_any+0x44/0x50
 mlxsw_pci_rdq_fini+0x8c/0xb0
 mlxsw_pci_queue_fini.isra.0+0x28/0x58
 mlxsw_pci_queue_group_fini+0x58/0x88
 mlxsw_pci_aqs_fini+0x2c/0x60
 mlxsw_pci_fini+0x34/0x50
 mlxsw_core_bus_device_unregister+0x104/0x1d0
 mlxsw_devlink_core_bus_device_reload_down+0x2c/0x48
 devlink_reload+0x44/0x158
 devlink_nl_cmd_reload+0x270/0x290
 genl_rcv_msg+0x188/0x2f0
 netlink_rcv_skb+0x5c/0x118
 genl_rcv+0x3c/0x50
 netlink_unicast+0x1bc/0x278
 netlink_sendmsg+0x194/0x390
 __sys_sendto+0xe0/0x158
 __arm64_sys_sendto+0x2c/0x38
 el0_svc_common.constprop.0+0x70/0x168
 do_el0_svc+0x28/0x88
 el0_sync_handler+0x88/0x190
 el0_sync+0x140/0x180

[2]
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1195432.html

[3]
https://patchwork.kernel.org/project/linux-scsi/patch/20170212214920.28866-1-anton@ozlabs.org/#20116693

Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index a903e97793f9a..addd5765576d9 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -1825,6 +1825,7 @@ int mlxsw_pci_driver_register(struct pci_driver *pci_driver)
 {
 	pci_driver->probe = mlxsw_pci_probe;
 	pci_driver->remove = mlxsw_pci_remove;
+	pci_driver->shutdown = mlxsw_pci_remove;
 	return pci_register_driver(pci_driver);
 }
 EXPORT_SYMBOL(mlxsw_pci_driver_register);
-- 
2.34.1

[PATCH 4.19 129/239] drm/bridge: megachips: Ensure both bridges are probed before registration

[Greg Kroah-Hartman]

From: Martyn Welch <martyn.welch@collabora.com>

[ Upstream commit 11632d4aa2b3f126790e81a4415d6c23103cf8bb ]

In the configuration used by the b850v3, the STDP2690 is used to read EDID
data whilst it's the STDP4028 which can detect when monitors are connected.

This can result in problems at boot with monitors connected when the
STDP4028 is probed first, a monitor is detected and an attempt is made to
read the EDID data before the STDP2690 has probed:

[    3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018
[    3.803845] pgd = (ptrval)
[    3.806581] [00000018] *pgd=00000000
[    3.810180] Internal error: Oops: 5 [#1] SMP ARM
[    3.814813] Modules linked in:
[    3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1
[    3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[    3.830705] Workqueue: events_unbound deferred_probe_work_func
[    3.836565] PC is at stdp2690_get_edid+0x44/0x19c
[    3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c
[    3.846526] pc : [<805eae10>]    lr : [<805eb138>]    psr: 80000013
[    3.852802] sp : 81c359d0  ip : 7dbb550b  fp : 81c35a1c
[    3.858037] r10: 81c73840  r9 : 81c73894  r8 : 816d9800
[    3.863270] r7 : 00000000  r6 : 81c34000  r5 : 00000000  r4 : 810c35f0
[    3.869808] r3 : 80e3e294  r2 : 00000080  r1 : 00000cc0  r0 : 81401180
[    3.876349] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    3.883499] Control: 10c5387d  Table: 1000404a  DAC: 00000051
[    3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0
[    3.897034] Register r1 information: non-paged memory
[    3.902097] Register r2 information: non-paged memory
[    3.907160] Register r3 information: non-slab/vmalloc memory
[    3.912832] Register r4 information: non-slab/vmalloc memory
[    3.918503] Register r5 information: NULL pointer
[    3.923217] Register r6 information: non-slab/vmalloc memory
[    3.928887] Register r7 information: NULL pointer
[    3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024
[    3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048
[    3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048
[    3.959873] Register r11 information: non-slab/vmalloc memory
[    3.965632] Register r12 information: non-paged memory
[    3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval))
[    3.977148] Stack: (0x81c359d0 to 0x81c36000)
[    3.981517] 59c0:                                     80b2b668 80b2b5bc 000002e2 0000034e
[    3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0
[    3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8
[    4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848
[    4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800
[    4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000
[    4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000
[    4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8
[    4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0
[    4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950
[    4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059
[    4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400
[    4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008
[    4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340
[    4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000
[    4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4
[    4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40
[    4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800
[    4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28
[    4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700
[    4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68
[    4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88
[    4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0
[    4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60
[    4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58
[    4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c
[    4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800
[    4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48
[    4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c
[    4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90
[    4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0
[    4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8
[    4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c
[    4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810
[    4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c
[    4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c
[    4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68
[    4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080
[    4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650
[    4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90
[    4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800
[    4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc
[    4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18
[    4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298
[    4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000
[    4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20
[    4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000
[    4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000
[    4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    4.391155] Backtrace:
[    4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c)
[    4.402691]  r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840
[    4.410534]  r4:810c35f0
[    4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c)
[    4.424240]  r5:00000045 r4:810c35f0
[    4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384)
[    4.439074]  r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8
[    4.446917]  r4:00000008
[    4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4)
[    4.460713]  r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010
[    4.468556]  r4:81fbb700
[    4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0)
[    4.482434]  r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800
[    4.490276]  r4:81fbb700
[    4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4)
[    4.502494]  r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800
[    4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130)
[    4.516805]  r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800
[    4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0)
[    4.531116]  r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240
[    4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184)
[    4.545597]  r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80
[    4.553440]  r4:81fe9740
[    4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20)
[    4.563921]  r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440
[    4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8)
[    4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8)
[    4.585908]  r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000
[    4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460)
[    4.601524]  r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810
[    4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230)
[    4.615658]  r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810
[    4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0)
[    4.630313]  r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310
[    4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c)
[    4.647227]  r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001
[    4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8)
[    4.663794]  r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000
[    4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190)
[    4.677753]  r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810
[    4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20)
[    4.691971]  r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080
[    4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c)
[    4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0)
[    4.716305]  r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080
[    4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c)
[    4.731139]  r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00
[    4.738981]  r4:810c50c0 r3:80615bc0
[    4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570)
[    4.750765]  r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800
[    4.758608]  r4:817eeb00
[    4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190)
[    4.768574]  r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00
[    4.776417]  r4:817efa40
[    4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24)
[    4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8)
[    4.791266] 5fa0:                                     00000000 00000000 00000000 00000000
[    4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    4.814279]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8
[    4.822120]  r4:817efa40
[    4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018)

Split the registration from the STDP4028 probe routine and only perform
registration once both the STDP4028 and STDP2690 have probed.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
CC: Peter Senna Tschudin <peter.senna@gmail.com>
CC: Martyn Welch <martyn.welch@collabora.co.uk>
CC: Neil Armstrong <narmstrong@baylibre.com>
CC: Robert Foss <robert.foss@linaro.org>
CC: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
CC: Jonas Karlman <jonas@kwiboo.se>
CC: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../bridge/megachips-stdpxxxx-ge-b850v3-fw.c  | 40 +++++++++++++------
 1 file changed, 28 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
index dcf091f9d843f..a8d776edccc15 100644
--- a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
+++ b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
@@ -302,19 +302,10 @@ out:
 	mutex_unlock(&ge_b850v3_lvds_dev_mutex);
 }
 
-static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
-				       const struct i2c_device_id *id)
+static int ge_b850v3_register(void)
 {
+	struct i2c_client *stdp4028_i2c = ge_b850v3_lvds_ptr->stdp4028_i2c;
 	struct device *dev = &stdp4028_i2c->dev;
-	int ret;
-
-	ret = ge_b850v3_lvds_init(dev);
-
-	if (ret)
-		return ret;
-
-	ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
-	i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
 
 	/* drm bridge initialization */
 	ge_b850v3_lvds_ptr->bridge.funcs = &ge_b850v3_lvds_funcs;
@@ -336,6 +327,27 @@ static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
 			"ge-b850v3-lvds-dp", ge_b850v3_lvds_ptr);
 }
 
+static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
+				       const struct i2c_device_id *id)
+{
+	struct device *dev = &stdp4028_i2c->dev;
+	int ret;
+
+	ret = ge_b850v3_lvds_init(dev);
+
+	if (ret)
+		return ret;
+
+	ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
+	i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
+
+	/* Only register after both bridges are probed */
+	if (!ge_b850v3_lvds_ptr->stdp2690_i2c)
+		return 0;
+
+	return ge_b850v3_register();
+}
+
 static int stdp4028_ge_b850v3_fw_remove(struct i2c_client *stdp4028_i2c)
 {
 	ge_b850v3_lvds_remove();
@@ -379,7 +391,11 @@ static int stdp2690_ge_b850v3_fw_probe(struct i2c_client *stdp2690_i2c,
 	ge_b850v3_lvds_ptr->stdp2690_i2c = stdp2690_i2c;
 	i2c_set_clientdata(stdp2690_i2c, ge_b850v3_lvds_ptr);
 
-	return 0;
+	/* Only register after both bridges are probed */
+	if (!ge_b850v3_lvds_ptr->stdp4028_i2c)
+		return 0;
+
+	return ge_b850v3_register();
 }
 
 static int stdp2690_ge_b850v3_fw_remove(struct i2c_client *stdp2690_i2c)
-- 
2.34.1

[PATCH 4.19 130/239] gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bdfd6ab8fdccd8b138837efff66f4a1911496378 ]

If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.

I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.

Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-acpi.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index b018909a4e46c..47cdc1f89e3fb 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -904,10 +904,17 @@ int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 			irq_flags = acpi_dev_get_irq_type(info.triggering,
 							  info.polarity);
 
-			/* Set type if specified and different than the current one */
-			if (irq_flags != IRQ_TYPE_NONE &&
-			    irq_flags != irq_get_trigger_type(irq))
-				irq_set_irq_type(irq, irq_flags);
+			/*
+			 * If the IRQ is not already in use then set type
+			 * if specified and different than the current one.
+			 */
+			if (can_request_irq(irq, irq_flags)) {
+				if (irq_flags != IRQ_TYPE_NONE &&
+				    irq_flags != irq_get_trigger_type(irq))
+					irq_set_irq_type(irq, irq_flags);
+			} else {
+				dev_dbg(&adev->dev, "IRQ %d already in use\n", irq);
+			}
 
 			return irq;
 		}
-- 
2.34.1

[PATCH 4.19 131/239] HSI: core: Fix return freed object in hsi_new_client

[Greg Kroah-Hartman]

From: Chengfeng Ye <cyeaa@connect.ust.hk>

[ Upstream commit a1ee1c08fcd5af03187dcd41dcab12fd5b379555 ]

cl is freed on error of calling device_register, but this
object is return later, which will cause uaf issue. Fix it
by return NULL on error.

Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hsi/hsi_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hsi/hsi_core.c b/drivers/hsi/hsi_core.c
index 71895da63810b..daf2de837a30a 100644
--- a/drivers/hsi/hsi_core.c
+++ b/drivers/hsi/hsi_core.c
@@ -115,6 +115,7 @@ struct hsi_client *hsi_new_client(struct hsi_port *port,
 	if (device_register(&cl->device) < 0) {
 		pr_err("hsi: failed to register client: %s\n", info->name);
 		put_device(&cl->device);
+		goto err;
 	}
 
 	return cl;
-- 
2.34.1

[PATCH 4.19 132/239] mwifiex: Fix skb_over_panic in mwifiex_usb_recv()

[Greg Kroah-Hartman]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit 04d80663f67ccef893061b49ec8a42ff7045ae84 ]

Currently, with an unknown recv_type, mwifiex_usb_recv
just return -1 without restoring the skb. Next time
mwifiex_usb_rx_complete is invoked with the same skb,
calling skb_put causes skb_over_panic.

The bug is triggerable with a compromised/malfunctioning
usb device. After applying the patch, skb_over_panic
no longer shows up with the same input.

Attached is the panic report from fuzzing.
skbuff: skb_over_panic: text:000000003bf1b5fa
 len:2048 put:4 head:00000000dd6a115b data:000000000a9445d8
 tail:0x844 end:0x840 dev:<NULL>
kernel BUG at net/core/skbuff.c:109!
invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 PID: 198 Comm: in:imklog Not tainted 5.6.0 #60
RIP: 0010:skb_panic+0x15f/0x161
Call Trace:
 <IRQ>
 ? mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
 skb_put.cold+0x24/0x24
 mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20
 </IRQ>

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YX4CqjfRcTa6bVL+@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/usb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c
index e6234b53a5ca2..90490d2c6d177 100644
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -130,7 +130,8 @@ static int mwifiex_usb_recv(struct mwifiex_adapter *adapter,
 		default:
 			mwifiex_dbg(adapter, ERROR,
 				    "unknown recv_type %#x\n", recv_type);
-			return -1;
+			ret = -1;
+			goto exit_restore_skb;
 		}
 		break;
 	case MWIFIEX_USB_EP_DATA:
-- 
2.34.1

[PATCH 4.19 133/239] rsi: Fix out-of-bounds read in rsi_read_pkt()

[Greg Kroah-Hartman]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit f1cb3476e48b60c450ec3a1d7da0805bffc6e43a ]

rsi_get_* functions rely on an offset variable from usb
input. The size of usb input is RSI_MAX_RX_USB_PKT_SIZE(3000),
while 2-byte offset can be up to 0xFFFF. Thus a large offset
can cause out-of-bounds read.

The patch adds a bound checking condition when rcv_pkt_len is 0,
indicating it's USB. It's unclear whether this is triggerable
from other type of bus. The following check might help in that case.
offset > rcv_pkt_len - FRAME_DESC_SZ

The bug is trigerrable with conpromised/malfunctioning USB devices.
I tested the patch with the crashing input and got no more bug report.

Attached is the KASAN report from fuzzing.

BUG: KASAN: slab-out-of-bounds in rsi_read_pkt+0x42e/0x500 [rsi_91x]
Read of size 2 at addr ffff888019439fdb by task RX-Thread/227

CPU: 0 PID: 227 Comm: RX-Thread Not tainted 5.6.0 #66
Call Trace:
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? rsi_read_pkt+0x42e/0x500 [rsi_91x]
 ? rsi_read_pkt+0x42e/0x500 [rsi_91x]
 __kasan_report.cold+0x37/0x7c
 ? rsi_read_pkt+0x42e/0x500 [rsi_91x]
 kasan_report+0xe/0x20
 rsi_read_pkt+0x42e/0x500 [rsi_91x]
 rsi_usb_rx_thread+0x1b1/0x2fc [rsi_usb]
 ? rsi_probe+0x16a0/0x16a0 [rsi_usb]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __wake_up_common+0x10b/0x520
 ? rsi_probe+0x16a0/0x16a0 [rsi_usb]
 kthread+0x2b5/0x3b0
 ? kthread_create_on_node+0xd0/0xd0
 ret_from_fork+0x22/0x40

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXxXS4wgu2OsmlVv@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_main.c | 4 ++++
 drivers/net/wireless/rsi/rsi_91x_usb.c  | 1 -
 drivers/net/wireless/rsi/rsi_usb.h      | 2 ++
 3 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index d90d8ab56fa28..c6f5c46cc88e7 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -23,6 +23,7 @@
 #include "rsi_common.h"
 #include "rsi_coex.h"
 #include "rsi_hal.h"
+#include "rsi_usb.h"
 
 u32 rsi_zone_enabled = /* INFO_ZONE |
 			INIT_ZONE |
@@ -173,6 +174,9 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
 		frame_desc = &rx_pkt[index];
 		actual_length = *(u16 *)&frame_desc[0];
 		offset = *(u16 *)&frame_desc[2];
+		if (!rcv_pkt_len && offset >
+			RSI_MAX_RX_USB_PKT_SIZE - FRAME_DESC_SZ)
+			goto fail;
 
 		queueno = rsi_get_queueno(frame_desc, offset);
 		length = rsi_get_length(frame_desc, offset);
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 984f99ad40960..da09e130710e0 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -312,7 +312,6 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t mem_flags)
 	struct sk_buff *skb;
 	u8 dword_align_bytes = 0;
 
-#define RSI_MAX_RX_USB_PKT_SIZE	3000
 	skb = dev_alloc_skb(RSI_MAX_RX_USB_PKT_SIZE);
 	if (!skb)
 		return -ENOMEM;
diff --git a/drivers/net/wireless/rsi/rsi_usb.h b/drivers/net/wireless/rsi/rsi_usb.h
index 5b2eddd1a2ee5..3d3d2643088d0 100644
--- a/drivers/net/wireless/rsi/rsi_usb.h
+++ b/drivers/net/wireless/rsi/rsi_usb.h
@@ -43,6 +43,8 @@
 #define RSI_USB_BUF_SIZE	     4096
 #define RSI_USB_CTRL_BUF_SIZE	     0x04
 
+#define RSI_MAX_RX_USB_PKT_SIZE	3000
+
 struct rx_usb_ctrl_block {
 	u8 *data;
 	struct urb *rx_urb;
-- 
2.34.1

[PATCH 4.19 134/239] usb: uhci: add aspeed ast2600 uhci support

[Greg Kroah-Hartman]

From: Neal Liu <neal_liu@aspeedtech.com>

[ Upstream commit 554abfe2eadec97d12c71d4a69da1518478f69eb ]

Enable ast2600 uhci quirks.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20211126100021.2331024-1-neal_liu@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/uhci-platform.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 89700e26fb296..813ff3660e9f1 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -113,7 +113,8 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
 				num_ports);
 		}
 		if (of_device_is_compatible(np, "aspeed,ast2400-uhci") ||
-		    of_device_is_compatible(np, "aspeed,ast2500-uhci")) {
+		    of_device_is_compatible(np, "aspeed,ast2500-uhci") ||
+		    of_device_is_compatible(np, "aspeed,ast2600-uhci")) {
 			uhci->is_aspeed = 1;
 			dev_info(&pdev->dev,
 				 "Enabled Aspeed implementation workarounds\n");
-- 
2.34.1

[PATCH 4.19 135/239] floppy: Add max size check for user space request

[Greg Kroah-Hartman]

From: Xiongwei Song <sxwjean@gmail.com>

[ Upstream commit 545a32498c536ee152331cd2e7d2416aa0f20e01 ]

We need to check the max request size that is from user space before
allocating pages. If the request size exceeds the limit, return -EINVAL.
This check can avoid the warning below from page allocator.

WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 current_gfp_context include/linux/sched/mm.h:195 [inline]
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 __alloc_pages+0x45d/0x500 mm/page_alloc.c:5356
Modules linked in:
CPU: 3 PID: 16525 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__alloc_pages+0x45d/0x500 mm/page_alloc.c:5344
Code: be c9 00 00 00 48 c7 c7 20 4a 97 89 c6 05 62 32 a7 0b 01 e8 74 9a 42 07 e9 6a ff ff ff 0f 0b e9 a0 fd ff ff 40 80 e5 3f eb 88 <0f> 0b e9 18 ff ff ff 4c 89 ef 44 89 e6 45 31 ed e8 1e 76 ff ff e9
RSP: 0018:ffffc90023b87850 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff92004770f0b RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000033 RDI: 0000000000010cc1
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff81bb4686 R11: 0000000000000001 R12: ffffffff902c1960
R13: 0000000000000033 R14: 0000000000000000 R15: ffff88804cf64a30
FS:  0000000000000000(0000) GS:ffff88802cd00000(0063) knlGS:00000000f44b4b40
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000002c921000 CR3: 000000004f507000 CR4: 0000000000150ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
 __get_free_pages+0x8/0x40 mm/page_alloc.c:5418
 raw_cmd_copyin drivers/block/floppy.c:3113 [inline]
 raw_cmd_ioctl drivers/block/floppy.c:3160 [inline]
 fd_locked_ioctl+0x12e5/0x2820 drivers/block/floppy.c:3528
 fd_ioctl drivers/block/floppy.c:3555 [inline]
 fd_compat_ioctl+0x891/0x1b60 drivers/block/floppy.c:3869
 compat_blkdev_ioctl+0x3b8/0x810 block/ioctl.c:662
 __do_compat_sys_ioctl+0x1c7/0x290 fs/ioctl.c:972
 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
 __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
 do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:203
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Reported-by: syzbot+23a02c7df2cf2bc93fa2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211116131033.27685-1-sxwjean@me.com
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/floppy.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 49ac9596c862e..e6e95e67c40ee 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3123,6 +3123,8 @@ static void raw_cmd_free(struct floppy_raw_cmd **ptr)
 	}
 }
 
+#define MAX_LEN (1UL << MAX_ORDER << PAGE_SHIFT)
+
 static int raw_cmd_copyin(int cmd, void __user *param,
 				 struct floppy_raw_cmd **rcmd)
 {
@@ -3160,7 +3162,7 @@ loop:
 	ptr->resultcode = 0;
 
 	if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) {
-		if (ptr->length <= 0)
+		if (ptr->length <= 0 || ptr->length >= MAX_LEN)
 			return -EINVAL;
 		ptr->kernel_data = (char *)fd_dma_mem_alloc(ptr->length);
 		fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length);
-- 
2.34.1

[PATCH 4.19 136/239] media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds.

[Greg Kroah-Hartman]

From: James Hilliard <james.hilliard1@gmail.com>

[ Upstream commit c8ed7d2f614cd8b315981d116c7a2fb01829500d ]

Some uvc devices appear to require the maximum allowed USB timeout
for GET_CUR/SET_CUR requests.

So lets just bump the UVC control timeout to 5 seconds which is the
same as the usb ctrl get/set defaults:
USB_CTRL_GET_TIMEOUT 5000
USB_CTRL_SET_TIMEOUT 5000

It fixes the following runtime warnings:
   Failed to query (GET_CUR) UVC control 11 on unit 2: -110 (exp. 1).
   Failed to query (SET_CUR) UVC control 3 on unit 2: -110 (exp. 2).

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/uvc/uvcvideo.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index a738486fd9d64..839ba3cc53119 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -176,7 +176,7 @@
 /* Maximum status buffer size in bytes of interrupt URB. */
 #define UVC_MAX_STATUS_SIZE	16
 
-#define UVC_CTRL_CONTROL_TIMEOUT	500
+#define UVC_CTRL_CONTROL_TIMEOUT	5000
 #define UVC_CTRL_STREAMING_TIMEOUT	5000
 
 /* Maximum allowed number of control mappings per device */
-- 
2.34.1

[PATCH 4.19 137/239] media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()

[Greg Kroah-Hartman]

From: Zhou Qingyang <zhou1615@umn.edu>

[ Upstream commit 348df8035301dd212e3cc2860efe4c86cb0d3303 ]

In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. In hexium_detach(), saa7146_vv_release()
will be called and there is a dereference of dev->vv_data in
saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init() according to the following logic.

Both hexium_attach() and hexium_detach() are callback functions of
the variable 'extension', so there exists a possible call chain directly
from hexium_attach() to hexium_detach():

hexium_attach(dev, info) -- fail to alloc memory to dev->vv_data
	|		    		in saa7146_vv_init().
	|
	|
hexium_detach() -- a dereference of dev->vv_data in saa7146_vv_release()

Fix this bug by adding a check of saa7146_vv_init().

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_VIDEO_HEXIUM_ORION=m show no new warnings,
and our static analyzer no longer warns about this code.

Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/saa7146/hexium_orion.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/saa7146/hexium_orion.c b/drivers/media/pci/saa7146/hexium_orion.c
index a794f9e5f9908..b88aa1feb7df2 100644
--- a/drivers/media/pci/saa7146/hexium_orion.c
+++ b/drivers/media/pci/saa7146/hexium_orion.c
@@ -367,10 +367,16 @@ static struct saa7146_ext_vv vv_data;
 static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
 {
 	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+	int ret;
 
 	DEB_EE("\n");
 
-	saa7146_vv_init(dev, &vv_data);
+	ret = saa7146_vv_init(dev, &vv_data);
+	if (ret) {
+		pr_err("Error in saa7146_vv_init()\n");
+		return ret;
+	}
+
 	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
 	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
 	vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
-- 
2.34.1

[PATCH 4.19 138/239] media: m920x: dont use stack on USB reads

[Greg Kroah-Hartman]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit a2ab06d7c4d6bfd0b545a768247a70463e977e27 ]

Using stack-allocated pointers for USB message data don't work.
This driver is almost OK with that, except for the I2C read
logic.

Fix it by using a temporary read buffer, just like on all other
calls to m920x_read().

Link: https://lore.kernel.org/all/ccc99e48-de4f-045e-0fe4-61e3118e3f74@mida.se/
Reported-by: rkardell@mida.se
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/m920x.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c
index 22554d9abd432..3b2a0f36fc38e 100644
--- a/drivers/media/usb/dvb-usb/m920x.c
+++ b/drivers/media/usb/dvb-usb/m920x.c
@@ -277,6 +277,13 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int nu
 			/* Should check for ack here, if we knew how. */
 		}
 		if (msg[i].flags & I2C_M_RD) {
+			char *read = kmalloc(1, GFP_KERNEL);
+			if (!read) {
+				ret = -ENOMEM;
+				kfree(read);
+				goto unlock;
+			}
+
 			for (j = 0; j < msg[i].len; j++) {
 				/* Last byte of transaction?
 				 * Send STOP, otherwise send ACK. */
@@ -284,9 +291,12 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int nu
 
 				if ((ret = m920x_read(d->udev, M9206_I2C, 0x0,
 						      0x20 | stop,
-						      &msg[i].buf[j], 1)) != 0)
+						      read, 1)) != 0)
 					goto unlock;
+				msg[i].buf[j] = read[0];
 			}
+
+			kfree(read);
 		} else {
 			for (j = 0; j < msg[i].len; j++) {
 				/* Last byte of transaction? Then send STOP. */
-- 
2.34.1

[PATCH 4.19 139/239] iwlwifi: mvm: synchronize with FW after multicast commands

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ]

If userspace installs a lot of multicast groups very quickly, then
we may run out of command queue space as we send the updates in an
asynchronous fashion (due to locking concerns), and the CPU can
create them faster than the firmware can process them. This is true
even when mac80211 has a work struct that gets scheduled.

Fix this by synchronizing with the firmware after sending all those
commands - outside of the iteration we can send a synchronous echo
command that just has the effect of the CPU waiting for the prior
asynchronous commands to finish. This also will cause fewer of the
commands to be sent to the firmware overall, because the work will
only run once when rescheduled multiple times while it's running.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649
Suggested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reported-by: Maximilian Ernestus <maximilian@ernestus.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c   | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 697a66acba9ce..3f37fb64e71c2 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1623,6 +1623,7 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm)
 	struct iwl_mvm_mc_iter_data iter_data = {
 		.mvm = mvm,
 	};
+	int ret;
 
 	lockdep_assert_held(&mvm->mutex);
 
@@ -1632,6 +1633,22 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm)
 	ieee80211_iterate_active_interfaces_atomic(
 		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
 		iwl_mvm_mc_iface_iterator, &iter_data);
+
+	/*
+	 * Send a (synchronous) ech command so that we wait for the
+	 * multiple asynchronous MCAST_FILTER_CMD commands sent by
+	 * the interface iterator. Otherwise, we might get here over
+	 * and over again (by userspace just sending a lot of these)
+	 * and the CPU can send them faster than the firmware can
+	 * process them.
+	 * Note that the CPU is still faster - but with this we'll
+	 * actually send fewer commands overall because the CPU will
+	 * not schedule the work in mac80211 as frequently if it's
+	 * still running when rescheduled (possibly multiple times).
+	 */
+	ret = iwl_mvm_send_cmd_pdu(mvm, ECHO_CMD, 0, 0, NULL);
+	if (ret)
+		IWL_ERR(mvm, "Failed to synchronize multicast groups update\n");
 }
 
 static u64 iwl_mvm_prepare_multicast(struct ieee80211_hw *hw,
-- 
2.34.1

[PATCH 4.19 140/239] ath10k: Fix tx hanging

[Greg Kroah-Hartman]

From: Sebastian Gottschall <s.gottschall@dd-wrt.com>

[ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ]

While running stress tests in roaming scenarios (switching ap's every 5
seconds, we discovered a issue which leads to tx hangings of exactly 5
seconds while or after scanning for new accesspoints. We found out that
this hanging is triggered by ath10k_mac_wait_tx_complete since the
empty_tx_wq was not wake when the num_tx_pending counter reaches zero.
To fix this, we simply move the wake_up call to htt_tx_dec_pending,
since this call was missed on several locations within the ath10k code.

Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_tx.c | 3 +++
 drivers/net/wireless/ath/ath10k/txrx.c   | 2 --
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index fd011bdabb963..3718d4dfc6d60 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -158,6 +158,9 @@ void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
 	htt->num_pending_tx--;
 	if (htt->num_pending_tx == htt->max_num_pending_tx - 1)
 		ath10k_mac_tx_unlock(htt->ar, ATH10K_TX_PAUSE_Q_FULL);
+
+	if (htt->num_pending_tx == 0)
+		wake_up(&htt->empty_tx_wq);
 }
 
 int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 6c47e4b6aa6cd..888a8f4aff5d8 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -91,8 +91,6 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 
 	ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
 	ath10k_htt_tx_dec_pending(htt);
-	if (htt->num_pending_tx == 0)
-		wake_up(&htt->empty_tx_wq);
 	spin_unlock_bh(&htt->tx_lock);
 
 	dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
-- 
2.34.1

[PATCH 4.19 141/239] net-sysfs: update the queue counts in the unregistration path

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ]

When updating Rx and Tx queue kobjects, the queue count should always be
updated to match the queue kobjects count. This was not done in the net
device unregistration path, fix it. Tracking all queue count updates
will allow in a following up patch to detect illegal updates.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/net-sysfs.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index fe0d255d66c8b..e5dc04cb55992 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1616,6 +1616,9 @@ static void remove_queue_kobjects(struct net_device *dev)
 
 	net_rx_queue_update_kobjects(dev, real_rx, 0);
 	netdev_queue_update_kobjects(dev, real_tx, 0);
+
+	dev->real_num_rx_queues = 0;
+	dev->real_num_tx_queues = 0;
 #ifdef CONFIG_SYSFS
 	kset_unregister(dev->queues_kset);
 #endif
-- 
2.34.1

[PATCH 4.19 142/239] x86/mce: Mark mce_panic() noinstr

[Greg Kroah-Hartman]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 3c7ce80a818fa7950be123cac80cd078e5ac1013 ]

And allow instrumentation inside it because it does calls to other
facilities which will not be tagged noinstr.

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0xc73: call to mce_panic() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-8-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 2a13468f87739..56c4456434a82 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -295,11 +295,17 @@ static void wait_for_panic(void)
 	panic("Panicing machine check CPU died");
 }
 
-static void mce_panic(const char *msg, struct mce *final, char *exp)
+static noinstr void mce_panic(const char *msg, struct mce *final, char *exp)
 {
-	int apei_err = 0;
 	struct llist_node *pending;
 	struct mce_evt_llist *l;
+	int apei_err = 0;
+
+	/*
+	 * Allow instrumentation around external facilities usage. Not that it
+	 * matters a whole lot since the machine is going to panic anyway.
+	 */
+	instrumentation_begin();
 
 	if (!fake_panic) {
 		/*
@@ -314,7 +320,7 @@ static void mce_panic(const char *msg, struct mce *final, char *exp)
 	} else {
 		/* Don't log too much for fake panic */
 		if (atomic_inc_return(&mce_fake_panicked) > 1)
-			return;
+			goto out;
 	}
 	pending = mce_gen_pool_prepare_records();
 	/* First print corrected ones that are still unlogged */
@@ -352,6 +358,9 @@ static void mce_panic(const char *msg, struct mce *final, char *exp)
 		panic(msg);
 	} else
 		pr_emerg(HW_ERR "Fake kernel panic: %s\n", msg);
+
+out:
+	instrumentation_end();
 }
 
 /* Support code for software error injection */
-- 
2.34.1

[PATCH 4.19 143/239] x86/mce: Mark mce_end() noinstr

[Greg Kroah-Hartman]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit b4813539d37fa31fed62cdfab7bd2dd8929c5b2e ]

It is called by the #MC handler which is noinstr.

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0xbd6: call to memset() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-9-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 56c4456434a82..26adaad3f2587 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1030,10 +1030,13 @@ static int mce_start(int *no_way_out)
  * Synchronize between CPUs after main scanning loop.
  * This invokes the bulk of the Monarch processing.
  */
-static int mce_end(int order)
+static noinstr int mce_end(int order)
 {
-	int ret = -1;
 	u64 timeout = (u64)mca_cfg.monarch_timeout * NSEC_PER_USEC;
+	int ret = -1;
+
+	/* Allow instrumentation around external facilities. */
+	instrumentation_begin();
 
 	if (!timeout)
 		goto reset;
@@ -1077,7 +1080,8 @@ static int mce_end(int order)
 		/*
 		 * Don't reset anything. That's done by the Monarch.
 		 */
-		return 0;
+		ret = 0;
+		goto out;
 	}
 
 	/*
@@ -1092,6 +1096,10 @@ reset:
 	 * Let others run again.
 	 */
 	atomic_set(&mce_executing, 0);
+
+out:
+	instrumentation_end();
+
 	return ret;
 }
 
-- 
2.34.1

[PATCH 4.19 144/239] x86/mce: Mark mce_read_aux() noinstr

[Greg Kroah-Hartman]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit db6c996d6ce45dfb44891f0824a65ecec216f47a ]

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0x681: call to mce_read_aux() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-10-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 26adaad3f2587..8f36ccf26ceca 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -651,7 +651,7 @@ static struct notifier_block mce_default_nb = {
 /*
  * Read ADDR and MISC registers.
  */
-static void mce_read_aux(struct mce *m, int i)
+static noinstr void mce_read_aux(struct mce *m, int i)
 {
 	if (m->status & MCI_STATUS_MISCV)
 		m->misc = mce_rdmsrl(msr_ops.misc(i));
-- 
2.34.1

[PATCH 4.19 145/239] net: bonding: debug: avoid printing debug logs when bond is not notifying peers

[Greg Kroah-Hartman]

From: Suresh Kumar <surkumar@redhat.com>

[ Upstream commit fee32de284ac277ba434a2d59f8ce46528ff3946 ]

Currently "bond_should_notify_peers: slave ..." messages are printed whenever
"bond_should_notify_peers" function is called.

+++
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
...
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
+++

This is confusing and can also clutter up debug logs.
Print logs only when the peer notification happens.

Signed-off-by: Suresh Kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index d6c5f41b17f7e..2d70cdd26f89d 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -782,14 +782,14 @@ static bool bond_should_notify_peers(struct bonding *bond)
 	slave = rcu_dereference(bond->curr_active_slave);
 	rcu_read_unlock();
 
-	netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n",
-		   slave ? slave->dev->name : "NULL");
-
 	if (!slave || !bond->send_peer_notif ||
 	    !netif_carrier_ok(bond->dev) ||
 	    test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
 		return false;
 
+	netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n",
+		   slave ? slave->dev->name : "NULL");
+
 	return true;
 }
 
-- 
2.34.1

[PATCH 4.19 146/239] bpf: Do not WARN in bpf_warn_invalid_xdp_action()

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 2cbad989033bff0256675c38f96f5faab852af4b ]

The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by
any bugged program, and even attaching a correct program to a NIC
not supporting the given action.

The resulting splat, beyond polluting the logs, fouls automated tools:
e.g. a syzkaller reproducers using an XDP program returning an
unsupported action will never pass validation.

Replace the WARN_ONCE with a less intrusive pr_warn_once().

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index 01496c7cb42d7..7d68c98a00aa8 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -5534,9 +5534,9 @@ void bpf_warn_invalid_xdp_action(u32 act)
 {
 	const u32 act_max = XDP_REDIRECT;
 
-	WARN_ONCE(1, "%s XDP return value %u, expect packet loss!\n",
-		  act > act_max ? "Illegal" : "Driver unsupported",
-		  act);
+	pr_warn_once("%s XDP return value %u, expect packet loss!\n",
+		     act > act_max ? "Illegal" : "Driver unsupported",
+		     act);
 }
 EXPORT_SYMBOL_GPL(bpf_warn_invalid_xdp_action);
 
-- 
2.34.1

[PATCH 4.19 147/239] HID: quirks: Allow inverting the absolute X/Y values

[Greg Kroah-Hartman]

From: Alistair Francis <alistair@alistair23.me>

[ Upstream commit fd8d135b2c5e88662f2729e034913f183455a667 ]

Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-input.c | 6 ++++++
 include/linux/hid.h     | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index d56ef395eb693..dd3f4aa052980 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1246,6 +1246,12 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 
 	input = field->hidinput->input;
 
+	if (usage->type == EV_ABS &&
+	    (((*quirks & HID_QUIRK_X_INVERT) && usage->code == ABS_X) ||
+	     ((*quirks & HID_QUIRK_Y_INVERT) && usage->code == ABS_Y))) {
+		value = field->logical_maximum - value;
+	}
+
 	if (usage->hat_min < usage->hat_max || usage->hat_dir) {
 		int hat_dir = usage->hat_dir;
 		if (!hat_dir)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index da824ba9fb9a2..c51ebce2197e0 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -353,6 +353,8 @@ struct hid_item {
 /* BIT(9) reserved for backward compatibility, was NO_INIT_INPUT_REPORTS */
 #define HID_QUIRK_ALWAYS_POLL			BIT(10)
 #define HID_QUIRK_INPUT_PER_APP			BIT(11)
+#define HID_QUIRK_X_INVERT			BIT(12)
+#define HID_QUIRK_Y_INVERT			BIT(13)
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS		BIT(16)
 #define HID_QUIRK_SKIP_OUTPUT_REPORT_ID		BIT(17)
 #define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP	BIT(18)
-- 
2.34.1

[PATCH 4.19 148/239] media: igorplugusb: receiver overflow should be reported

[Greg Kroah-Hartman]

From: Sean Young <sean@mess.org>

[ Upstream commit 8fede658e7ddb605bbd68ed38067ddb0af033db4 ]

Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/igorplugusb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/rc/igorplugusb.c b/drivers/media/rc/igorplugusb.c
index f563ddd7f7392..98a13532a5968 100644
--- a/drivers/media/rc/igorplugusb.c
+++ b/drivers/media/rc/igorplugusb.c
@@ -73,9 +73,11 @@ static void igorplugusb_irdata(struct igorplugusb *ir, unsigned len)
 	if (start >= len) {
 		dev_err(ir->dev, "receive overflow invalid: %u", overflow);
 	} else {
-		if (overflow > 0)
+		if (overflow > 0) {
 			dev_warn(ir->dev, "receive overflow, at least %u lost",
 								overflow);
+			ir_raw_event_reset(ir->rc);
+		}
 
 		do {
 			rawir.duration = ir->buf_in[i] * 85333;
-- 
2.34.1

[PATCH 4.19 149/239] media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()

[Greg Kroah-Hartman]

From: Zhou Qingyang <zhou1615@umn.edu>

[ Upstream commit 3af86b046933ba513d08399dba0d4d8b50d607d0 ]

In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of saa7146_register_device(). There is a dereference of
dev->vv_data in saa7146_vv_release(), which could lead to a NULL
pointer dereference on failure of saa7146_vv_init().

Fix this bug by adding a check of saa7146_vv_init().

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings,
and our static analyzer no longer warns about this code.

Link: https://lore.kernel.org/linux-media/20211203154030.111210-1-zhou1615@umn.edu
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/saa7146/saa7146_fops.c | 2 +-
 drivers/media/pci/saa7146/hexium_gemini.c   | 7 ++++++-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/common/saa7146/saa7146_fops.c b/drivers/media/common/saa7146/saa7146_fops.c
index d4987fd05d05f..d91bd32bd1f04 100644
--- a/drivers/media/common/saa7146/saa7146_fops.c
+++ b/drivers/media/common/saa7146/saa7146_fops.c
@@ -524,7 +524,7 @@ int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv)
 		ERR("out of memory. aborting.\n");
 		kfree(vv);
 		v4l2_ctrl_handler_free(hdl);
-		return -1;
+		return -ENOMEM;
 	}
 
 	saa7146_video_uops.init(dev,vv);
diff --git a/drivers/media/pci/saa7146/hexium_gemini.c b/drivers/media/pci/saa7146/hexium_gemini.c
index 8c56d4c37a525..3513b1a6fcee9 100644
--- a/drivers/media/pci/saa7146/hexium_gemini.c
+++ b/drivers/media/pci/saa7146/hexium_gemini.c
@@ -296,7 +296,12 @@ static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_d
 	hexium_set_input(hexium, 0);
 	hexium->cur_input = 0;
 
-	saa7146_vv_init(dev, &vv_data);
+	ret = saa7146_vv_init(dev, &vv_data);
+	if (ret) {
+		i2c_del_adapter(&hexium->i2c_adapter);
+		kfree(hexium);
+		return ret;
+	}
 
 	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
 	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
-- 
2.34.1

[PATCH 4.19 150/239] mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

[Greg Kroah-Hartman]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 8c3e5b74b9e2146f564905e50ca716591c76d4f1 ]

The mmc core takes a specific path to support initializing of a
non-standard SDIO card. This is triggered by looking for the card-quirk,
MMC_QUIRK_NONSTD_SDIO.

In mmc_sdio_init_card() this gets rather messy, as it causes the code to
bail out earlier, compared to the usual path. This leads to that the OCR
doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has
been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by
assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops.

To make the behaviour consistent, let's instead rely on the core to save
the OCR in card->ocr during initialization.

Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/e7936cff7fc24d187ef2680d3b4edb0ade58f293.1636564631.git.hns@goldelico.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/sdio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 4e72ad24322f7..5f1ee88aa7615 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -634,6 +634,8 @@ try_again:
 	if (host->ops->init_card)
 		host->ops->init_card(host, card);
 
+	card->ocr = ocr_card;
+
 	/*
 	 * If the host and card support UHS-I mode request the card
 	 * to switch to 1.8V signaling level.  No 1.8v signalling if
@@ -740,7 +742,7 @@ try_again:
 
 		card = oldcard;
 	}
-	card->ocr = ocr_card;
+
 	mmc_fixup_device(card, sdio_fixup_methods);
 
 	if (card->type == MMC_TYPE_SD_COMBO) {
-- 
2.34.1

[PATCH 4.19 151/239] audit: ensure userspace is penalized the same as the kernel when under pressure

[Greg Kroah-Hartman]

From: Paul Moore <paul@paul-moore.com>

[ Upstream commit 8f110f530635af44fff1f4ee100ecef0bac62510 ]

Due to the audit control mutex necessary for serializing audit
userspace messages we haven't been able to block/penalize userspace
processes that attempt to send audit records while the system is
under audit pressure.  The result is that privileged userspace
applications have a priority boost with respect to audit as they are
not bound by the same audit queue throttling as the other tasks on
the system.

This patch attempts to restore some balance to the system when under
audit pressure by blocking these privileged userspace tasks after
they have finished their audit processing, and dropped the audit
control mutex, but before they return to userspace.

Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/audit.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/kernel/audit.c b/kernel/audit.c
index 968921d376b98..c5e034fe14bbb 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -1528,6 +1528,20 @@ static void audit_receive(struct sk_buff  *skb)
 		nlh = nlmsg_next(nlh, &len);
 	}
 	audit_ctl_unlock();
+
+	/* can't block with the ctrl lock, so penalize the sender now */
+	if (audit_backlog_limit &&
+	    (skb_queue_len(&audit_queue) > audit_backlog_limit)) {
+		DECLARE_WAITQUEUE(wait, current);
+
+		/* wake kauditd to try and flush the queue */
+		wake_up_interruptible(&kauditd_wait);
+
+		add_wait_queue_exclusive(&audit_backlog_wait, &wait);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(audit_backlog_wait_time);
+		remove_wait_queue(&audit_backlog_wait, &wait);
+	}
 }
 
 /* Run custom bind function on netlink socket group connect or bind requests. */
@@ -1772,7 +1786,9 @@ struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask,
 	 *    task_tgid_vnr() since auditd_pid is set in audit_receive_msg()
 	 *    using a PID anchored in the caller's namespace
 	 * 2. generator holding the audit_cmd_mutex - we don't want to block
-	 *    while holding the mutex */
+	 *    while holding the mutex, although we do penalize the sender
+	 *    later in audit_receive() when it is safe to block
+	 */
 	if (!(auditd_test_task(current) || audit_ctl_owner_current())) {
 		long stime = audit_backlog_wait_time;
 
-- 
2.34.1

[PATCH 4.19 152/239] arm64: tegra: Adjust length of CCPLEX cluster MMIO region

[Greg Kroah-Hartman]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 2b14cbd643feea5fc17c6e8bead4e71088c69acd ]

The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index b762227f6aa18..fc5d047ca50bc 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -372,7 +372,7 @@
 
 	ccplex@e000000 {
 		compatible = "nvidia,tegra186-ccplex-cluster";
-		reg = <0x0 0x0e000000 0x0 0x3fffff>;
+		reg = <0x0 0x0e000000 0x0 0x400000>;
 
 		nvidia,bpmp = <&bpmp>;
 	};
-- 
2.34.1

[PATCH 4.19 153/239] usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 00558586382891540c59c9febc671062425a6e47 ]

When a new USB device gets plugged to nested hubs, the affected hub,
which connects to usb 2-1.4-port2, doesn't report there's any change,
hence the nested hubs go back to runtime suspend like nothing happened:
[  281.032951] usb usb2: usb wakeup-resume
[  281.032959] usb usb2: usb auto-resume
[  281.032974] hub 2-0:1.0: hub_resume
[  281.033011] usb usb2-port1: status 0263 change 0000
[  281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.049797] usb 2-1: usb wakeup-resume
[  281.069800] usb 2-1: Waited 0ms for CONNECT
[  281.069810] usb 2-1: finish resume
[  281.070026] hub 2-1:1.0: hub_resume
[  281.070250] usb 2-1-port4: status 0203 change 0000
[  281.070272] usb usb2-port1: resume, status 0
[  281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[  281.089813] usb 2-1.4: usb wakeup-resume
[  281.109792] usb 2-1.4: Waited 0ms for CONNECT
[  281.109801] usb 2-1.4: finish resume
[  281.109991] hub 2-1.4:1.0: hub_resume
[  281.110147] usb 2-1.4-port2: status 0263 change 0000
[  281.110234] usb 2-1-port4: resume, status 0
[  281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[  281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.110426] hub 2-1.4:1.0: hub_suspend
[  281.110565] usb 2-1.4: usb auto-suspend, wakeup 1
[  281.130998] hub 2-1:1.0: hub_suspend
[  281.137788] usb 2-1: usb auto-suspend, wakeup 1
[  281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.177828] usb 2-1: usb wakeup-resume
[  281.197839] usb 2-1: Waited 0ms for CONNECT
[  281.197850] usb 2-1: finish resume
[  281.197984] hub 2-1:1.0: hub_resume
[  281.198203] usb 2-1-port4: status 0203 change 0000
[  281.198228] usb usb2-port1: resume, status 0
[  281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[  281.217835] usb 2-1.4: usb wakeup-resume
[  281.237834] usb 2-1.4: Waited 0ms for CONNECT
[  281.237845] usb 2-1.4: finish resume
[  281.237990] hub 2-1.4:1.0: hub_resume
[  281.238067] usb 2-1.4-port2: status 0263 change 0000
[  281.238148] usb 2-1-port4: resume, status 0
[  281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[  281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.238385] hub 2-1.4:1.0: hub_suspend
[  281.238523] usb 2-1.4: usb auto-suspend, wakeup 1
[  281.258076] hub 2-1:1.0: hub_suspend
[  281.265744] usb 2-1: usb auto-suspend, wakeup 1
[  281.285976] hub 2-0:1.0: hub_suspend
[  281.285988] usb usb2: bus auto-suspend, wakeup 1

USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If
the link is in a non-U0 state, then the device must transition the link
to U0 prior to sending the remote wake message", but the hub only
transits the link to U0 after signaling remote wakeup.

So be more forgiving and use a 20ms delay to let the link transit to U0
for remote wakeup.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20211215120108.336597-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/hub.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 7feb25559e079..29cc2aa5abff5 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1082,7 +1082,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 		} else {
 			hub_power_on(hub, true);
 		}
-	}
+	/* Give some time on remote wakeup to let links to transit to U0 */
+	} else if (hub_is_superspeed(hub->hdev))
+		msleep(20);
+
  init2:
 
 	/*
-- 
2.34.1

[PATCH 4.19 154/239] ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream

[Greg Kroah-Hartman]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ]

Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.

4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.

BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23

CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 __kasan_report.cold+0x37/0x7c
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 kasan_report+0xe/0x20
 check_memory_region+0x15a/0x1d0
 memcpy+0x20/0x50
 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __usb_unanchor_urb+0x12f/0x210
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 2ed98aaed6fb5..c8c7afe0e343e 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -590,6 +590,13 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 			return;
 		}
 
+		if (pkt_len > 2 * MAX_RX_BUF_SIZE) {
+			dev_err(&hif_dev->udev->dev,
+				"ath9k_htc: invalid pkt_len (%x)\n", pkt_len);
+			RX_STAT_INC(skb_dropped);
+			return;
+		}
+
 		pad_len = 4 - (pkt_len & 0x3);
 		if (pad_len == 4)
 			pad_len = 0;
-- 
2.34.1

[PATCH 4.19 155/239] iwlwifi: fix leaks/bad data after failed firmware load

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit ab07506b0454bea606095951e19e72c282bfbb42 ]

If firmware load fails after having loaded some parts of the
firmware, e.g. the IML image, then this would leak. For the
host command list we'd end up running into a WARN on the next
attempt to load another firmware image.

Fix this by calling iwl_dealloc_ucode() on failures, and make
that also clear the data so we start fresh on the next round.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index db6628d390a2a..72f5df66cdeb5 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -183,6 +183,9 @@ static void iwl_dealloc_ucode(struct iwl_drv *drv)
 
 	for (i = 0; i < IWL_UCODE_TYPE_MAX; i++)
 		iwl_free_fw_img(drv, drv->fw.img + i);
+
+	/* clear the data for the aborted load case */
+	memset(&drv->fw, 0, sizeof(drv->fw));
 }
 
 static int iwl_alloc_fw_desc(struct iwl_drv *drv, struct fw_desc *desc,
@@ -1270,6 +1273,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 	int i;
 	bool load_module = false;
 	bool usniffer_images = false;
+	bool failure = true;
 
 	fw->ucode_capa.max_probe_length = IWL_DEFAULT_MAX_PROBE_LENGTH;
 	fw->ucode_capa.standard_phy_calibration_size =
@@ -1537,6 +1541,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 				op->name, err);
 #endif
 	}
+	failure = false;
 	goto free;
 
  try_again:
@@ -1552,6 +1557,9 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 	complete(&drv->request_firmware_complete);
 	device_release_driver(drv->trans->dev);
  free:
+	if (failure)
+		iwl_dealloc_ucode(drv);
+
 	if (pieces) {
 		for (i = 0; i < ARRAY_SIZE(pieces->img); i++)
 			kfree(pieces->img[i].sec);
-- 
2.34.1

[PATCH 4.19 156/239] iwlwifi: remove module loading failure message

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 6518f83ffa51131daaf439b66094f684da3fb0ae ]

When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes
when the opmode module cannot be loaded, due to completing
the completion before using drv->dev, which can then already
be freed.

Fix this by removing the (fairly useless) message. Moving the
completion later causes a deadlock instead, so that's not an
option.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20211210091245.289008-2-luca@coelho.fi
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 72f5df66cdeb5..c44108823f796 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1532,15 +1532,8 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 	 * else from proceeding if the module fails to load
 	 * or hangs loading.
 	 */
-	if (load_module) {
+	if (load_module)
 		request_module("%s", op->name);
-#ifdef CONFIG_IWLWIFI_OPMODE_MODULAR
-		if (err)
-			IWL_ERR(drv,
-				"failed to load module %s (error %d), is dynamic loading enabled?\n",
-				op->name, err);
-#endif
-	}
 	failure = false;
 	goto free;
 
-- 
2.34.1

[PATCH 4.19 157/239] iwlwifi: mvm: Fix calculation of frame length

[Greg Kroah-Hartman]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 40a0b38d7a7f91a6027287e0df54f5f547e8d27e ]

The RADA might include in the Rx frame the MIC and CRC bytes.
These bytes should be removed for non monitor interfaces and
should not be passed to mac80211.

Fix the Rx processing to remove the extra bytes on non monitor
cases.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
index 77e3694536421..9a4848d69e9e1 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -151,12 +151,39 @@ static int iwl_mvm_create_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
 	struct iwl_rx_mpdu_desc *desc = (void *)pkt->data;
 	unsigned int headlen, fraglen, pad_len = 0;
 	unsigned int hdrlen = ieee80211_hdrlen(hdr->frame_control);
+	u8 mic_crc_len = u8_get_bits(desc->mac_flags1,
+				     IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK) << 1;
 
 	if (desc->mac_flags2 & IWL_RX_MPDU_MFLG2_PAD) {
 		len -= 2;
 		pad_len = 2;
 	}
 
+	/*
+	 * For non monitor interface strip the bytes the RADA might not have
+	 * removed. As monitor interface cannot exist with other interfaces
+	 * this removal is safe.
+	 */
+	if (mic_crc_len && !ieee80211_hw_check(mvm->hw, RX_INCLUDES_FCS)) {
+		u32 pkt_flags = le32_to_cpu(pkt->len_n_flags);
+
+		/*
+		 * If RADA was not enabled then decryption was not performed so
+		 * the MIC cannot be removed.
+		 */
+		if (!(pkt_flags & FH_RSCSR_RADA_EN)) {
+			if (WARN_ON(crypt_len > mic_crc_len))
+				return -EINVAL;
+
+			mic_crc_len -= crypt_len;
+		}
+
+		if (WARN_ON(mic_crc_len > len))
+			return -EINVAL;
+
+		len -= mic_crc_len;
+	}
+
 	/* If frame is small enough to fit in skb->head, pull it completely.
 	 * If not, only pull ieee80211_hdr (including crypto if present, and
 	 * an additional 8 bytes for SNAP/ethertype, see below) so that
-- 
2.34.1

[PATCH 4.19 158/239] um: registers: Rename function names to avoid conflicts and build problems

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 077b7320942b64b0da182aefd83c374462a65535 ]

The function names init_registers() and restore_registers() are used
in several net/ethernet/ and gpu/drm/ drivers for other purposes (not
calls to UML functions), so rename them.

This fixes multiple build errors.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/include/shared/registers.h | 4 ++--
 arch/um/os-Linux/registers.c       | 4 ++--
 arch/um/os-Linux/start_up.c        | 2 +-
 arch/x86/um/syscalls_64.c          | 3 ++-
 4 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h
index a74449b5b0e31..12ad7c435e97f 100644
--- a/arch/um/include/shared/registers.h
+++ b/arch/um/include/shared/registers.h
@@ -16,8 +16,8 @@ extern int restore_fp_registers(int pid, unsigned long *fp_regs);
 extern int save_fpx_registers(int pid, unsigned long *fp_regs);
 extern int restore_fpx_registers(int pid, unsigned long *fp_regs);
 extern int save_registers(int pid, struct uml_pt_regs *regs);
-extern int restore_registers(int pid, struct uml_pt_regs *regs);
-extern int init_registers(int pid);
+extern int restore_pid_registers(int pid, struct uml_pt_regs *regs);
+extern int init_pid_registers(int pid);
 extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
 extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
 extern int get_fp_registers(int pid, unsigned long *regs);
diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c
index 2ff8d4fe83c4f..34a5963bd7efd 100644
--- a/arch/um/os-Linux/registers.c
+++ b/arch/um/os-Linux/registers.c
@@ -21,7 +21,7 @@ int save_registers(int pid, struct uml_pt_regs *regs)
 	return 0;
 }
 
-int restore_registers(int pid, struct uml_pt_regs *regs)
+int restore_pid_registers(int pid, struct uml_pt_regs *regs)
 {
 	int err;
 
@@ -36,7 +36,7 @@ int restore_registers(int pid, struct uml_pt_regs *regs)
 static unsigned long exec_regs[MAX_REG_NR];
 static unsigned long exec_fp_regs[FP_SIZE];
 
-int init_registers(int pid)
+int init_pid_registers(int pid)
 {
 	int err;
 
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 82bf5f8442ba4..2c75f2d638681 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -336,7 +336,7 @@ void __init os_early_checks(void)
 	check_tmpexec();
 
 	pid = start_ptraced_child();
-	if (init_registers(pid))
+	if (init_pid_registers(pid))
 		fatal("Failed to initialize default registers");
 	stop_ptraced_child(pid, 1, 1);
 }
diff --git a/arch/x86/um/syscalls_64.c b/arch/x86/um/syscalls_64.c
index 58f51667e2e4b..8249685b40960 100644
--- a/arch/x86/um/syscalls_64.c
+++ b/arch/x86/um/syscalls_64.c
@@ -11,6 +11,7 @@
 #include <linux/uaccess.h>
 #include <asm/prctl.h> /* XXX This should get the constants from libc */
 #include <os.h>
+#include <registers.h>
 
 long arch_prctl(struct task_struct *task, int option,
 		unsigned long __user *arg2)
@@ -35,7 +36,7 @@ long arch_prctl(struct task_struct *task, int option,
 	switch (option) {
 	case ARCH_SET_FS:
 	case ARCH_SET_GS:
-		ret = restore_registers(pid, &current->thread.regs.regs);
+		ret = restore_pid_registers(pid, &current->thread.regs.regs);
 		if (ret)
 			return ret;
 		break;
-- 
2.34.1

[PATCH 4.19 159/239] jffs2: GC deadlock reading a page that is used in jffs2_write_begin()

[Greg Kroah-Hartman]

From: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>

[ Upstream commit aa39cc675799bc92da153af9a13d6f969c348e82 ]

GC task can deadlock in read_cache_page() because it may attempt
to release a page that is actually allocated by another task in
jffs2_write_begin().
The reason is that in jffs2_write_begin() there is a small window
a cache page is allocated for use but not set Uptodate yet.

This ends up with a deadlock between two tasks:
1) A task (e.g. file copy)
   - jffs2_write_begin() locks a cache page
   - jffs2_write_end() tries to lock "alloc_sem" from
	 jffs2_reserve_space() <-- STUCK
2) GC task (jffs2_gcd_mtd3)
   - jffs2_garbage_collect_pass() locks "alloc_sem"
   - try to lock the same cache page in read_cache_page() <-- STUCK

So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin()
while reading data in a cache page.

Signed-off-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jffs2/file.c | 40 +++++++++++++++++++++++++---------------
 1 file changed, 25 insertions(+), 15 deletions(-)

diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 7d8654a1472ef..3047872fdac9b 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -135,20 +135,15 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 	struct page *pg;
 	struct inode *inode = mapping->host;
 	struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+	struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
 	pgoff_t index = pos >> PAGE_SHIFT;
 	uint32_t pageofs = index << PAGE_SHIFT;
 	int ret = 0;
 
-	pg = grab_cache_page_write_begin(mapping, index, flags);
-	if (!pg)
-		return -ENOMEM;
-	*pagep = pg;
-
 	jffs2_dbg(1, "%s()\n", __func__);
 
 	if (pageofs > inode->i_size) {
 		/* Make new hole frag from old EOF to new page */
-		struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
 		struct jffs2_raw_inode ri;
 		struct jffs2_full_dnode *fn;
 		uint32_t alloc_len;
@@ -159,7 +154,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 		ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
 					  ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
 		if (ret)
-			goto out_page;
+			goto out_err;
 
 		mutex_lock(&f->sem);
 		memset(&ri, 0, sizeof(ri));
@@ -189,7 +184,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 			ret = PTR_ERR(fn);
 			jffs2_complete_reservation(c);
 			mutex_unlock(&f->sem);
-			goto out_page;
+			goto out_err;
 		}
 		ret = jffs2_add_full_dnode_to_inode(c, f, fn);
 		if (f->metadata) {
@@ -204,13 +199,26 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 			jffs2_free_full_dnode(fn);
 			jffs2_complete_reservation(c);
 			mutex_unlock(&f->sem);
-			goto out_page;
+			goto out_err;
 		}
 		jffs2_complete_reservation(c);
 		inode->i_size = pageofs;
 		mutex_unlock(&f->sem);
 	}
 
+	/*
+	 * While getting a page and reading data in, lock c->alloc_sem until
+	 * the page is Uptodate. Otherwise GC task may attempt to read the same
+	 * page in read_cache_page(), which causes a deadlock.
+	 */
+	mutex_lock(&c->alloc_sem);
+	pg = grab_cache_page_write_begin(mapping, index, flags);
+	if (!pg) {
+		ret = -ENOMEM;
+		goto release_sem;
+	}
+	*pagep = pg;
+
 	/*
 	 * Read in the page if it wasn't already present. Cannot optimize away
 	 * the whole page write case until jffs2_write_end can handle the
@@ -220,15 +228,17 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 		mutex_lock(&f->sem);
 		ret = jffs2_do_readpage_nolock(inode, pg);
 		mutex_unlock(&f->sem);
-		if (ret)
-			goto out_page;
+		if (ret) {
+			unlock_page(pg);
+			put_page(pg);
+			goto release_sem;
+		}
 	}
 	jffs2_dbg(1, "end write_begin(). pg->flags %lx\n", pg->flags);
-	return ret;
 
-out_page:
-	unlock_page(pg);
-	put_page(pg);
+release_sem:
+	mutex_unlock(&c->alloc_sem);
+out_err:
 	return ret;
 }
 
-- 
2.34.1

[PATCH 4.19 160/239] ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions

[Greg Kroah-Hartman]

From: Mark Langsdorf <mlangsdo@redhat.com>

[ Upstream commit f81bdeaf816142e0729eea0cc84c395ec9673151 ]

ACPICA commit bc02c76d518135531483dfc276ed28b7ee632ce1

The current ACPI_ACCESS_*_WIDTH defines do not provide a way to
test that size is small enough to not cause an overflow when
applied to a 32-bit integer.

Rather than adding more magic numbers, add ACPI_ACCESS_*_SHIFT,
ACPI_ACCESS_*_MAX, and ACPI_ACCESS_*_DEFAULT #defines and
redefine ACPI_ACCESS_*_WIDTH in terms of the new #defines.

This was inititally reported on Linux where a size of 102 in
ACPI_ACCESS_BIT_WIDTH caused an overflow error in the SPCR
initialization code.

Link: https://github.com/acpica/acpica/commit/bc02c76d
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/acpi/actypes.h | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 2939a6cd7fecb..9fc1dfc7f4c32 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -532,8 +532,14 @@ typedef u64 acpi_integer;
  * Can be used with access_width of struct acpi_generic_address and access_size of
  * struct acpi_resource_generic_register.
  */
-#define ACPI_ACCESS_BIT_WIDTH(size)     (1 << ((size) + 2))
-#define ACPI_ACCESS_BYTE_WIDTH(size)    (1 << ((size) - 1))
+#define ACPI_ACCESS_BIT_SHIFT		2
+#define ACPI_ACCESS_BYTE_SHIFT		-1
+#define ACPI_ACCESS_BIT_MAX		(31 - ACPI_ACCESS_BIT_SHIFT)
+#define ACPI_ACCESS_BYTE_MAX		(31 - ACPI_ACCESS_BYTE_SHIFT)
+#define ACPI_ACCESS_BIT_DEFAULT		(8 - ACPI_ACCESS_BIT_SHIFT)
+#define ACPI_ACCESS_BYTE_DEFAULT	(8 - ACPI_ACCESS_BYTE_SHIFT)
+#define ACPI_ACCESS_BIT_WIDTH(size)	(1 << ((size) + ACPI_ACCESS_BIT_SHIFT))
+#define ACPI_ACCESS_BYTE_WIDTH(size)	(1 << ((size) + ACPI_ACCESS_BYTE_SHIFT))
 
 /*******************************************************************************
  *
-- 
2.34.1

[PATCH 4.19 161/239] ACPICA: Utilities: Avoid deleting the same object twice in a row

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

[ Upstream commit 1cdfe9e346b4c5509ffe19ccde880fd259d9f7a3 ]

ACPICA commit c11af67d8f7e3d381068ce7771322f2b5324d687

If original_count is 0 in acpi_ut_update_ref_count (),
acpi_ut_delete_internal_obj () is invoked for the target object, which is
incorrect, because that object has been deleted once already and the
memory allocated to store it may have been reclaimed and allocated
for a different purpose by the host OS.  Moreover, a confusing debug
message following the "Reference Count is already zero, cannot
decrement" warning is printed in that case.

To fix this issue, make acpi_ut_update_ref_count () return after finding
that original_count is 0 and printing the above warning.

Link: https://github.com/acpica/acpica/commit/c11af67d
Link: https://github.com/acpica/acpica/pull/652
Reported-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/utdelete.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index 0dc8dea815823..db79a826e6b8d 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -410,6 +410,7 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
 			ACPI_WARNING((AE_INFO,
 				      "Obj %p, Reference Count is already zero, cannot decrement\n",
 				      object));
+			return;
 		}
 
 		ACPI_DEBUG_PRINT_RAW((ACPI_DB_ALLOCATIONS,
-- 
2.34.1

[PATCH 4.19 162/239] ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

[ Upstream commit 24ea5f90ec9548044a6209685c5010edd66ffe8f ]

ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e

If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class,
acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to
obtain return_desc which may require additional resolution with
the help of acpi_ex_read_data_from_field (). If the latter fails,
the reference counter of the original return_desc is decremented
which is incorrect, because acpi_ns_get_attached_object () does not
increment the reference counter of the object returned by it.

This issue may lead to premature deletion of the attached object
while it is still attached and a use-after-free and crash in the
host OS.  For example, this may happen when on evaluation of ref_of()
a local region field where there is no registered handler for the
given Operation Region.

Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away
after a acpi_ex_read_data_from_field () failure.

Link: https://github.com/acpica/acpica/commit/d984f120
Link: https://github.com/acpica/acpica/pull/685
Reported-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/exoparg1.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c
index ba9fbae0cf91f..319f4bc6a8394 100644
--- a/drivers/acpi/acpica/exoparg1.c
+++ b/drivers/acpi/acpica/exoparg1.c
@@ -1007,7 +1007,8 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 						    (walk_state, return_desc,
 						     &temp_desc);
 						if (ACPI_FAILURE(status)) {
-							goto cleanup;
+							return_ACPI_STATUS
+							    (status);
 						}
 
 						return_desc = temp_desc;
-- 
2.34.1

[PATCH 4.19 163/239] ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5

[Greg Kroah-Hartman]

From: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

[ Upstream commit 1d4e0b3abb168b2ee1eca99c527cffa1b80b6161 ]

ACPICA commit 3dd7e1f3996456ef81bfe14cba29860e8d42949e

According to ACPI 6.4, Section 16.2, the CPU cache flushing is
required on entering to S1, S2, and S3, but the ACPICA code
flushes the CPU cache regardless of the sleep state.

Blind cache flush on entering S5 causes problems for TDX.

Flushing happens with WBINVD that is not supported in the TDX
environment.

TDX only supports S5 and adjusting ACPICA code to conform to the
spec more strictly fixes the issue.

Link: https://github.com/acpica/acpica/commit/3dd7e1f3
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/hwesleep.c  | 4 +++-
 drivers/acpi/acpica/hwsleep.c   | 4 +++-
 drivers/acpi/acpica/hwxfsleep.c | 2 --
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c
index 9516966124ae3..9380a5e214da4 100644
--- a/drivers/acpi/acpica/hwesleep.c
+++ b/drivers/acpi/acpica/hwesleep.c
@@ -104,7 +104,9 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state)
 
 	/* Flush caches, as per ACPI specification */
 
-	ACPI_FLUSH_CPU_CACHE();
+	if (sleep_state < ACPI_STATE_S4) {
+		ACPI_FLUSH_CPU_CACHE();
+	}
 
 	status = acpi_os_enter_sleep(sleep_state, sleep_control, 0);
 	if (status == AE_CTRL_TERMINATE) {
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index f4282370947c8..6368ff544af1a 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -110,7 +110,9 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
 
 	/* Flush caches, as per ACPI specification */
 
-	ACPI_FLUSH_CPU_CACHE();
+	if (sleep_state < ACPI_STATE_S4) {
+		ACPI_FLUSH_CPU_CACHE();
+	}
 
 	status = acpi_os_enter_sleep(sleep_state, pm1a_control, pm1b_control);
 	if (status == AE_CTRL_TERMINATE) {
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index dc1e44ccaae20..d0dca7dae080c 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -189,8 +189,6 @@ acpi_status acpi_enter_sleep_state_s4bios(void)
 		return_ACPI_STATUS(status);
 	}
 
-	ACPI_FLUSH_CPU_CACHE();
-
 	status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
 				    (u32)acpi_gbl_FADT.s4_bios_request, 8);
 
-- 
2.34.1

[PATCH 4.19 164/239] drm/amdgpu: fixup bad vram size on gmc v8

[Greg Kroah-Hartman]

From: Zongmin Zhou <zhouzongmin@kylinos.cn>

[ Upstream commit 11544d77e3974924c5a9c8a8320b996a3e9b2f8b ]

Some boards(like RX550) seem to have garbage in the upper
16 bits of the vram size register.  Check for
this and clamp the size properly.  Fixes
boards reporting bogus amounts of vram.

after add this patch,the maximum GPU VRAM size is 64GB,
otherwise only 64GB vram size will be used.

Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
index 1a744f964b301..358004a4650b6 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
@@ -520,10 +520,10 @@ static void gmc_v8_0_mc_program(struct amdgpu_device *adev)
 static int gmc_v8_0_mc_init(struct amdgpu_device *adev)
 {
 	int r;
+	u32 tmp;
 
 	adev->gmc.vram_width = amdgpu_atombios_get_vram_width(adev);
 	if (!adev->gmc.vram_width) {
-		u32 tmp;
 		int chansize, numchan;
 
 		/* Get VRAM informations */
@@ -567,8 +567,15 @@ static int gmc_v8_0_mc_init(struct amdgpu_device *adev)
 		adev->gmc.vram_width = numchan * chansize;
 	}
 	/* size in MB on si */
-	adev->gmc.mc_vram_size = RREG32(mmCONFIG_MEMSIZE) * 1024ULL * 1024ULL;
-	adev->gmc.real_vram_size = RREG32(mmCONFIG_MEMSIZE) * 1024ULL * 1024ULL;
+	tmp = RREG32(mmCONFIG_MEMSIZE);
+	/* some boards may have garbage in the upper 16 bits */
+	if (tmp & 0xffff0000) {
+		DRM_INFO("Probable bad vram size: 0x%08x\n", tmp);
+		if (tmp & 0xffff)
+			tmp &= 0xffff;
+	}
+	adev->gmc.mc_vram_size = tmp * 1024ULL * 1024ULL;
+	adev->gmc.real_vram_size = adev->gmc.mc_vram_size;
 
 	if (!(adev->flags & AMD_IS_APU)) {
 		r = amdgpu_device_resize_fb_bar(adev);
-- 
2.34.1

[PATCH 4.19 165/239] ACPI: battery: Add the ThinkPad "Not Charging" quirk

[Greg Kroah-Hartman]

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit e96c1197aca628f7d2480a1cc3214912b40b3414 ]

The EC/ACPI firmware on Lenovo ThinkPads used to report a status
of "Unknown" when the battery is between the charge start and
charge stop thresholds. On Windows, it reports "Not Charging"
so the quirk has been added to also report correctly.

Now the "status" attribute returns "Not Charging" when the
battery on ThinkPads is not physicaly charging.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/battery.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 0bbf8b453ebf2..d4e42a578e186 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -78,6 +78,7 @@ static int battery_bix_broken_package;
 static int battery_notification_delay_ms;
 static int battery_ac_is_broken;
 static int battery_check_pmic = 1;
+static int battery_quirk_notcharging;
 static unsigned int cache_time = 1000;
 module_param(cache_time, uint, 0644);
 MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
@@ -246,6 +247,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (acpi_battery_is_charged(battery))
 			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else if (battery_quirk_notcharging)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else
 			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
 		break;
@@ -1350,6 +1353,12 @@ battery_do_not_check_pmic_quirk(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int __init battery_quirk_not_charging(const struct dmi_system_id *d)
+{
+	battery_quirk_notcharging = 1;
+	return 0;
+}
+
 static const struct dmi_system_id bat_dmi_table[] __initconst = {
 	{
 		/* NEC LZ750/LS */
@@ -1394,6 +1403,19 @@ static const struct dmi_system_id bat_dmi_table[] __initconst = {
 		  DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"),
 		},
 	},
+	{
+		/*
+		 * On Lenovo ThinkPads the BIOS specification defines
+		 * a state when the bits for charging and discharging
+		 * are both set to 0. That state is "Not Charging".
+		 */
+		.callback = battery_quirk_not_charging,
+		.ident = "Lenovo ThinkPad",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
+		},
+	},
 	{},
 };
 
-- 
2.34.1

[PATCH 4.19 166/239] btrfs: remove BUG_ON() in find_parent_nodes()

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit fcba0120edf88328524a4878d1d6f4ad39f2ec81 ]

We search for an extent entry with .offset = -1, which shouldn't be a
thing, but corruption happens.  Add an ASSERT() for the developers,
return -EUCLEAN for mortals.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/backref.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 6b8824de2abb2..0073182d4e689 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1160,7 +1160,12 @@ again:
 	ret = btrfs_search_slot(trans, fs_info->extent_root, &key, path, 0, 0);
 	if (ret < 0)
 		goto out;
-	BUG_ON(ret == 0);
+	if (ret == 0) {
+		/* This shouldn't happen, indicates a bug or fs corruption. */
+		ASSERT(ret != 0);
+		ret = -EUCLEAN;
+		goto out;
+	}
 
 #ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
 	if (trans && likely(trans->type != __TRANS_DUMMY) &&
-- 
2.34.1

[PATCH 4.19 167/239] btrfs: remove BUG_ON(!eie) in find_parent_nodes

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 9f05c09d6baef789726346397438cca4ec43c3ee ]

If we're looking for leafs that point to a data extent we want to record
the extent items that point at our bytenr.  At this point we have the
reference and we know for a fact that this leaf should have a reference
to our bytenr.  However if there's some sort of corruption we may not
find any references to our leaf, and thus could end up with eie == NULL.
Replace this BUG_ON() with an ASSERT() and then return -EUCLEAN for the
mortals.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/backref.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 0073182d4e689..3fe15d6f40873 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1313,10 +1313,18 @@ again:
 				goto out;
 			if (!ret && extent_item_pos) {
 				/*
-				 * we've recorded that parent, so we must extend
-				 * its inode list here
+				 * We've recorded that parent, so we must extend
+				 * its inode list here.
+				 *
+				 * However if there was corruption we may not
+				 * have found an eie, return an error in this
+				 * case.
 				 */
-				BUG_ON(!eie);
+				ASSERT(eie);
+				if (!eie) {
+					ret = -EUCLEAN;
+					goto out;
+				}
 				while (eie->next)
 					eie = eie->next;
 				eie->next = ref->inode_list;
-- 
2.34.1

[PATCH 4.19 168/239] net: mdio: Demote probed message to debug print

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ]

On systems with large numbers of MDIO bus/muxes the message indicating
that a given MDIO bus has been successfully probed is repeated for as
many buses we have, which can eat up substantial boot time for no
reason, demote to a debug print.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mdio_bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 3207da2224f67..eaa890a6a5d21 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -426,7 +426,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 	mdiobus_setup_mdiodev_from_board_info(bus, mdiobus_create_device);
 
 	bus->state = MDIOBUS_REGISTERED;
-	pr_info("%s: probed\n", bus->name);
+	dev_dbg(&bus->dev, "probed\n");
 	return 0;
 
 error:
-- 
2.34.1

[PATCH 4.19 169/239] mac80211: allow non-standard VHT MCS-10/11

[Greg Kroah-Hartman]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 04be6d337d37400ad5b3d5f27ca87645ee5a18a3 ]

Some AP can possibly try non-standard VHT rate and mac80211 warns and drops
packets, and leads low TCP throughput.

    Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2
    WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021

Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11")
has added, mac80211 adds this support as well.

After this patch, throughput is good and iw can get the bitrate:
    rx bitrate:	975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2
or
    rx bitrate:	1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2

Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891
Reported-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20220103013623.17052-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index e0baa563a4dea..c42cc79895202 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4620,7 +4620,7 @@ void ieee80211_rx_napi(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta,
 				goto drop;
 			break;
 		case RX_ENC_VHT:
-			if (WARN_ONCE(status->rate_idx > 9 ||
+			if (WARN_ONCE(status->rate_idx > 11 ||
 				      !status->nss ||
 				      status->nss > 8,
 				      "Rate marked as a VHT rate but data is invalid: MCS: %d, NSS: %d\n",
-- 
2.34.1

[PATCH 4.19 170/239] dm btree: add a defensive bounds check to insert_at()

[Greg Kroah-Hartman]

From: Joe Thornber <ejt@redhat.com>

[ Upstream commit 85bca3c05b6cca31625437eedf2060e846c4bbad ]

Corrupt metadata could trigger an out of bounds write.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/persistent-data/dm-btree.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/md/persistent-data/dm-btree.c b/drivers/md/persistent-data/dm-btree.c
index 8aae0624a2971..6383afb88f319 100644
--- a/drivers/md/persistent-data/dm-btree.c
+++ b/drivers/md/persistent-data/dm-btree.c
@@ -83,14 +83,16 @@ void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
 }
 
 static int insert_at(size_t value_size, struct btree_node *node, unsigned index,
-		      uint64_t key, void *value)
-		      __dm_written_to_disk(value)
+		     uint64_t key, void *value)
+	__dm_written_to_disk(value)
 {
 	uint32_t nr_entries = le32_to_cpu(node->header.nr_entries);
+	uint32_t max_entries = le32_to_cpu(node->header.max_entries);
 	__le64 key_le = cpu_to_le64(key);
 
 	if (index > nr_entries ||
-	    index >= le32_to_cpu(node->header.max_entries)) {
+	    index >= max_entries ||
+	    nr_entries >= max_entries) {
 		DMERR("too many entries in btree node for insert");
 		__dm_unbless_for_disk(value);
 		return -ENOMEM;
-- 
2.34.1

[PATCH 4.19 171/239] dm space map common: add bounds check to sm_ll_lookup_bitmap()

[Greg Kroah-Hartman]

From: Joe Thornber <ejt@redhat.com>

[ Upstream commit cba23ac158db7f3cd48a923d6861bee2eb7a2978 ]

Corrupted metadata could warrant returning error from sm_ll_lookup_bitmap().

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/persistent-data/dm-space-map-common.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c
index a284762e548e1..5115a27196038 100644
--- a/drivers/md/persistent-data/dm-space-map-common.c
+++ b/drivers/md/persistent-data/dm-space-map-common.c
@@ -279,6 +279,11 @@ int sm_ll_lookup_bitmap(struct ll_disk *ll, dm_block_t b, uint32_t *result)
 	struct disk_index_entry ie_disk;
 	struct dm_block *blk;
 
+	if (b >= ll->nr_blocks) {
+		DMERR_LIMIT("metadata block out of bounds");
+		return -EINVAL;
+	}
+
 	b = do_div(index, ll->entries_per_block);
 	r = ll->load_ie(ll, index, &ie_disk);
 	if (r < 0)
-- 
2.34.1

[PATCH 4.19 172/239] net: phy: marvell: configure RGMII delays for 88E1118

[Greg Kroah-Hartman]

From: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

[ Upstream commit f22725c95ececb703c3f741e8f946d23705630b7 ]

Corentin Labbe reports that the SSI 1328 does not work when allowing
the PHY to operate at gigabit speeds, but does work with the generic
PHY driver.

This appears to be because m88e1118_config_init() writes a fixed value
to the MSCR register, claiming that this is to enable 1G speeds.
However, this always sets bits 4 and 5, enabling RGMII transmit and
receive delays. The suspicion is that the original board this was
added for required the delays to make 1G speeds work.

Add the necessary configuration for RGMII delays for the 88E1118 to
bring this into line with the requirements for RGMII support, and thus
make the SSI 1328 work.

Corentin Labbe has tested this on gemini-ssi1328 and gemini-ns2502.

Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/marvell.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 832a401c5fa56..484f6691b9c9f 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -930,6 +930,12 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	if (phy_interface_is_rgmii(phydev)) {
+		err = m88e1121_config_aneg_rgmii_delays(phydev);
+		if (err < 0)
+			return err;
+	}
+
 	/* Adjust LED Control */
 	if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
 		err = phy_write(phydev, 0x10, 0x1100);
-- 
2.34.1

[PATCH 4.19 173/239] net: gemini: allow any RGMII interface mode

[Greg Kroah-Hartman]

From: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

[ Upstream commit 4e4f325a0a55907b14f579e6b1a38c53755e3de2 ]

The four RGMII interface modes take care of the required RGMII delay
configuration at the PHY and should not be limited by the network MAC
driver. Sadly, gemini was only permitting RGMII mode with no delays,
which would require the required delay to be inserted via PCB tracking
or by the MAC.

However, there are designs that require the PHY to add the delay, which
is impossible without Gemini permitting the other three PHY interface
modes. Fix the driver to allow these.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://lore.kernel.org/r/E1n4mpT-002PLd-Ha@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cortina/gemini.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index 5242687060b44..f8a3d1fecb0a5 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -304,21 +304,21 @@ static void gmac_speed_set(struct net_device *netdev)
 	switch (phydev->speed) {
 	case 1000:
 		status.bits.speed = GMAC_SPEED_1000;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
 		netdev_dbg(netdev, "connect %s to RGMII @ 1Gbit\n",
 			   phydev_name(phydev));
 		break;
 	case 100:
 		status.bits.speed = GMAC_SPEED_100;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
 		netdev_dbg(netdev, "connect %s to RGMII @ 100 Mbit\n",
 			   phydev_name(phydev));
 		break;
 	case 10:
 		status.bits.speed = GMAC_SPEED_10;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
 		netdev_dbg(netdev, "connect %s to RGMII @ 10 Mbit\n",
 			   phydev_name(phydev));
@@ -389,6 +389,9 @@ static int gmac_setup_phy(struct net_device *netdev)
 		status.bits.mii_rmii = GMAC_PHY_GMII;
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
 		netdev_dbg(netdev,
 			   "RGMII: set GMAC0 and GMAC1 to MII/RGMII mode\n");
 		status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
-- 
2.34.1

[PATCH 4.19 174/239] regulator: qcom_smd: Align probe function with rpmh-regulator

[Greg Kroah-Hartman]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit 14e2976fbabdacb01335d7f91eeebbc89c67ddb1 ]

The RPMh regulator driver is much newer and gets more attention, which in
consequence makes it do a few things better. Update qcom_smd-regulator's
probe function to mimic what rpmh-regulator does to address a couple of
issues:

- Probe defer now works correctly, before it used to, well,
  kinda just die.. This fixes reliable probing on (at least) PM8994,
  because Linux apparently cannot deal with supply map dependencies yet..

- Regulator data is now matched more sanely: regulator data is matched
  against each individual regulator node name and throwing an -EINVAL if
  data is missing, instead of just assuming everything is fine and
  iterating over all subsequent array members.

- status = "disabled" will now work for disabling individual regulators in
  DT. Previously it didn't seem to do much if anything at all.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20211230023442.1123424-1-konrad.dybcio@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/qcom_smd-regulator.c | 100 +++++++++++++++++--------
 1 file changed, 70 insertions(+), 30 deletions(-)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index fe2fb36803e0b..8d920a3ad40b8 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -17,6 +17,7 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/soc/qcom/smd-rpm.h>
 
 struct qcom_rpm_reg {
@@ -673,52 +674,91 @@ static const struct of_device_id rpm_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rpm_of_match);
 
-static int rpm_reg_probe(struct platform_device *pdev)
+/**
+ * rpm_regulator_init_vreg() - initialize all attributes of a qcom_smd-regulator
+ * @vreg:		Pointer to the individual qcom_smd-regulator resource
+ * @dev:		Pointer to the top level qcom_smd-regulator PMIC device
+ * @node:		Pointer to the individual qcom_smd-regulator resource
+ *			device node
+ * @rpm:		Pointer to the rpm bus node
+ * @pmic_rpm_data:	Pointer to a null-terminated array of qcom_smd-regulator
+ *			resources defined for the top level PMIC device
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpm_regulator_init_vreg(struct qcom_rpm_reg *vreg, struct device *dev,
+				   struct device_node *node, struct qcom_smd_rpm *rpm,
+				   const struct rpm_regulator_data *pmic_rpm_data)
 {
-	const struct rpm_regulator_data *reg;
-	const struct of_device_id *match;
-	struct regulator_config config = { };
+	struct regulator_config config = {};
+	const struct rpm_regulator_data *rpm_data;
 	struct regulator_dev *rdev;
+	int ret;
+
+	for (rpm_data = pmic_rpm_data; rpm_data->name; rpm_data++)
+		if (of_node_name_eq(node, rpm_data->name))
+			break;
+
+	if (!rpm_data->name) {
+		dev_err(dev, "Unknown regulator %pOFn\n", node);
+		return -EINVAL;
+	}
+
+	vreg->dev	= dev;
+	vreg->rpm	= rpm;
+	vreg->type	= rpm_data->type;
+	vreg->id	= rpm_data->id;
+
+	memcpy(&vreg->desc, rpm_data->desc, sizeof(vreg->desc));
+	vreg->desc.name = rpm_data->name;
+	vreg->desc.supply_name = rpm_data->supply;
+	vreg->desc.owner = THIS_MODULE;
+	vreg->desc.type = REGULATOR_VOLTAGE;
+	vreg->desc.of_match = rpm_data->name;
+
+	config.dev		= dev;
+	config.of_node		= node;
+	config.driver_data	= vreg;
+
+	rdev = devm_regulator_register(dev, &vreg->desc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(dev, "%pOFn: devm_regulator_register() failed, ret=%d\n", node, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct rpm_regulator_data *vreg_data;
+	struct device_node *node;
 	struct qcom_rpm_reg *vreg;
 	struct qcom_smd_rpm *rpm;
+	int ret;
 
 	rpm = dev_get_drvdata(pdev->dev.parent);
 	if (!rpm) {
-		dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+		dev_err(&pdev->dev, "Unable to retrieve handle to rpm\n");
 		return -ENODEV;
 	}
 
-	match = of_match_device(rpm_of_match, &pdev->dev);
-	if (!match) {
-		dev_err(&pdev->dev, "failed to match device\n");
+	vreg_data = of_device_get_match_data(dev);
+	if (!vreg_data)
 		return -ENODEV;
-	}
 
-	for (reg = match->data; reg->name; reg++) {
+	for_each_available_child_of_node(dev->of_node, node) {
 		vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
 		if (!vreg)
 			return -ENOMEM;
 
-		vreg->dev = &pdev->dev;
-		vreg->type = reg->type;
-		vreg->id = reg->id;
-		vreg->rpm = rpm;
-
-		memcpy(&vreg->desc, reg->desc, sizeof(vreg->desc));
-
-		vreg->desc.id = -1;
-		vreg->desc.owner = THIS_MODULE;
-		vreg->desc.type = REGULATOR_VOLTAGE;
-		vreg->desc.name = reg->name;
-		vreg->desc.supply_name = reg->supply;
-		vreg->desc.of_match = reg->name;
-
-		config.dev = &pdev->dev;
-		config.driver_data = vreg;
-		rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
-		if (IS_ERR(rdev)) {
-			dev_err(&pdev->dev, "failed to register %s\n", reg->name);
-			return PTR_ERR(rdev);
+		ret = rpm_regulator_init_vreg(vreg, dev, node, rpm, vreg_data);
+
+		if (ret < 0) {
+			of_node_put(node);
+			return ret;
 		}
 	}
 
-- 
2.34.1

[PATCH 4.19 175/239] serial: pl010: Drop CR register reset on set_termios

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

[ Upstream commit 08a0c6dff91c965e39905cf200d22db989203ccb ]

pl010_set_termios() briefly resets the CR register to zero.

Where does this register write come from?

The PL010 driver's IRQ handler ambauart_int() originally modified the CR
register without holding the port spinlock.  ambauart_set_termios() also
modified that register.  To prevent concurrent read-modify-writes by the
IRQ handler and to prevent transmission while changing baudrate,
ambauart_set_termios() had to disable interrupts.  That is achieved by
writing zero to the CR register.

However in 2004 the PL010 driver was amended to acquire the port
spinlock in the IRQ handler, obviating the need to disable interrupts in
->set_termios():
https://git.kernel.org/history/history/c/157c0342e591

That rendered the CR register write obsolete.  Drop it.

Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/fcaff16e5b1abb4cc3da5a2879ac13f278b99ed0.1641128728.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/amba-pl010.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 2c37d11726aba..13f882e5e7b76 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -452,14 +452,11 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
 	if ((termios->c_cflag & CREAD) == 0)
 		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
 
-	/* first, disable everything */
 	old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
 
 	if (UART_ENABLE_MS(port, termios->c_cflag))
 		old_cr |= UART010_CR_MSIE;
 
-	writel(0, uap->port.membase + UART010_CR);
-
 	/* Set baud rate */
 	quot -= 1;
 	writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-- 
2.34.1

[PATCH 4.19 176/239] serial: core: Keep mctrl register state and cached copy in sync

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

[ Upstream commit 93a770b7e16772530196674ffc79bb13fa927dc6 ]

struct uart_port contains a cached copy of the Modem Control signals.
It is used to skip register writes in uart_update_mctrl() if the new
signal state equals the old signal state.  It also avoids a register
read to obtain the current state of output signals.

When a uart_port is registered, uart_configure_port() changes signal
state but neglects to keep the cached copy in sync.  That may cause
a subsequent register write to be incorrectly skipped.  Fix it before
it trips somebody up.

This behavior has been present ever since the serial core was introduced
in 2002:
https://git.kernel.org/history/history/c/33c0d1b0c3eb

So far it was never an issue because the cached copy is initialized to 0
by kzalloc() and when uart_configure_port() is executed, at most DTR has
been set by uart_set_options() or sunsu_console_setup().  Therefore,
a stable designation seems unnecessary.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/bceeaba030b028ed810272d55d5fc6f3656ddddb.1641129752.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/serial_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 63aefe7e91be1..ab4d0f6058c04 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2347,7 +2347,8 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 		 * We probably don't need a spinlock around this, but
 		 */
 		spin_lock_irqsave(&port->lock, flags);
-		port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR);
+		port->mctrl &= TIOCM_DTR;
+		port->ops->set_mctrl(port, port->mctrl);
 		spin_unlock_irqrestore(&port->lock, flags);
 
 		/*
-- 
2.34.1

[PATCH 4.19 177/239] parisc: Avoid calling faulthandler_disabled() twice

[Greg Kroah-Hartman]

From: John David Anglin <dave.anglin@bell.net>

[ Upstream commit 9e9d4b460f23bab61672eae397417d03917d116c ]

In handle_interruption(), we call faulthandler_disabled() to check whether the
fault handler is not disabled. If the fault handler is disabled, we immediately
call do_page_fault(). It then calls faulthandler_disabled(). If disabled,
do_page_fault() attempts to fixup the exception by jumping to no_context:

no_context:

        if (!user_mode(regs) && fixup_exception(regs)) {
                return;
        }

        parisc_terminate("Bad Address (null pointer deref?)", regs, code, address);

Apart from the error messages, the two blocks of code perform the same
function.

We can avoid two calls to faulthandler_disabled() by a simple revision
to the code in handle_interruption().

Note: I didn't try to fix the formatting of this code block.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index abeb5321a83fc..d7a66d8525091 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -750,7 +750,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 	     * unless pagefault_disable() was called before.
 	     */
 
-	    if (fault_space == 0 && !faulthandler_disabled())
+	    if (faulthandler_disabled() || fault_space == 0)
 	    {
 		/* Clean up and return if in exception table. */
 		if (fixup_exception(regs))
-- 
2.34.1

[PATCH 4.19 178/239] powerpc/6xx: add missing of_node_put

[Greg Kroah-Hartman]

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit f6e82647ff71d427d4148964b71f239fba9d7937 ]

for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression e;
local idexpression n;
@@

@@
local idexpression n;
expression e;
@@

 for_each_compatible_node(n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-2-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index 8112b39879d67..7b4edf1cb2c8d 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -220,6 +220,7 @@ void hlwd_pic_probe(void)
 			irq_set_chained_handler(cascade_virq,
 						hlwd_pic_irq_cascade);
 			hlwd_irq_host = host;
+			of_node_put(np);
 			break;
 		}
 	}
-- 
2.34.1

[PATCH 4.19 179/239] powerpc/powernv: add missing of_node_put

[Greg Kroah-Hartman]

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit 7d405a939ca960162eb30c1475759cb2fdf38f8c ]

for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
local idexpression n;
expression e;
@@

 for_each_compatible_node(n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-4-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/opal-lpc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index 6c7ad1d8b32ed..21f0edcfb84ad 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -400,6 +400,7 @@ void __init opal_lpc_init(void)
 		if (!of_get_property(np, "primary", NULL))
 			continue;
 		opal_lpc_chip_id = of_get_ibm_chip_id(np);
+		of_node_put(np);
 		break;
 	}
 	if (opal_lpc_chip_id < 0)
-- 
2.34.1

[PATCH 4.19 180/239] powerpc/cell: add missing of_node_put

[Greg Kroah-Hartman]

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit a841fd009e51c8c0a8f07c942e9ab6bb48da8858 ]

for_each_node_by_name performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression e,e1;
local idexpression n;
@@

 for_each_node_by_name(n, e1) {
   ... when != of_node_put(n)
       when != e = n
(
   return n;
|
+  of_node_put(n);
?  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-7-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/cell/iommu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 12352a58072ab..d9c2c4cc60be1 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -1088,6 +1088,7 @@ static int __init cell_iommu_fixed_mapping_init(void)
 			if (hbase < dbase || (hend > (dbase + dsize))) {
 				pr_debug("iommu: hash window doesn't fit in"
 					 "real DMA window\n");
+				of_node_put(np);
 				return -1;
 			}
 		}
-- 
2.34.1

[PATCH 4.19 181/239] powerpc/btext: add missing of_node_put

[Greg Kroah-Hartman]

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit a1d2b210ffa52d60acabbf7b6af3ef7e1e69cda0 ]

for_each_node_by_type performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
local idexpression n;
expression e;
@@

 for_each_node_by_type(n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-6-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/btext.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index b2072d5bbf2bb..a046504d8bfaf 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -258,8 +258,10 @@ int __init btext_find_display(int allow_nonstdout)
 			rc = btext_initialize(np);
 			printk("result: %d\n", rc);
 		}
-		if (rc == 0)
+		if (rc == 0) {
+			of_node_put(np);
 			break;
+		}
 	}
 	return rc;
 }
-- 
2.34.1

[PATCH 4.19 182/239] powerpc/watchdog: Fix missed watchdog reset due to memory ordering race

[Greg Kroah-Hartman]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 5dad4ba68a2483fc80d70b9dc90bbe16e1f27263 ]

It is possible for all CPUs to miss the pending cpumask becoming clear,
and then nobody resetting it, which will cause the lockup detector to
stop working. It will eventually expire, but watchdog_smp_panic will
avoid doing anything if the pending mask is clear and it will never be
reset.

Order the cpumask clear vs the subsequent test to close this race.

Add an extra check for an empty pending mask when the watchdog fires and
finds its bit still clear, to try to catch any other possible races or
bugs here and keep the watchdog working. The extra test in
arch_touch_nmi_watchdog is required to prevent the new warning from
firing off.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Debugged-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/watchdog.c | 41 +++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index af3c15a1d41eb..75b2a6c4db5a5 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -132,6 +132,10 @@ static void set_cpumask_stuck(const struct cpumask *cpumask, u64 tb)
 {
 	cpumask_or(&wd_smp_cpus_stuck, &wd_smp_cpus_stuck, cpumask);
 	cpumask_andnot(&wd_smp_cpus_pending, &wd_smp_cpus_pending, cpumask);
+	/*
+	 * See wd_smp_clear_cpu_pending()
+	 */
+	smp_mb();
 	if (cpumask_empty(&wd_smp_cpus_pending)) {
 		wd_smp_last_reset_tb = tb;
 		cpumask_andnot(&wd_smp_cpus_pending,
@@ -217,13 +221,44 @@ static void wd_smp_clear_cpu_pending(int cpu, u64 tb)
 
 			cpumask_clear_cpu(cpu, &wd_smp_cpus_stuck);
 			wd_smp_unlock(&flags);
+		} else {
+			/*
+			 * The last CPU to clear pending should have reset the
+			 * watchdog so we generally should not find it empty
+			 * here if our CPU was clear. However it could happen
+			 * due to a rare race with another CPU taking the
+			 * last CPU out of the mask concurrently.
+			 *
+			 * We can't add a warning for it. But just in case
+			 * there is a problem with the watchdog that is causing
+			 * the mask to not be reset, try to kick it along here.
+			 */
+			if (unlikely(cpumask_empty(&wd_smp_cpus_pending)))
+				goto none_pending;
 		}
 		return;
 	}
+
 	cpumask_clear_cpu(cpu, &wd_smp_cpus_pending);
+
+	/*
+	 * Order the store to clear pending with the load(s) to check all
+	 * words in the pending mask to check they are all empty. This orders
+	 * with the same barrier on another CPU. This prevents two CPUs
+	 * clearing the last 2 pending bits, but neither seeing the other's
+	 * store when checking if the mask is empty, and missing an empty
+	 * mask, which ends with a false positive.
+	 */
+	smp_mb();
 	if (cpumask_empty(&wd_smp_cpus_pending)) {
 		unsigned long flags;
 
+none_pending:
+		/*
+		 * Double check under lock because more than one CPU could see
+		 * a clear mask with the lockless check after clearing their
+		 * pending bits.
+		 */
 		wd_smp_lock(&flags);
 		if (cpumask_empty(&wd_smp_cpus_pending)) {
 			wd_smp_last_reset_tb = tb;
@@ -314,8 +349,12 @@ void arch_touch_nmi_watchdog(void)
 {
 	unsigned long ticks = tb_ticks_per_usec * wd_timer_period_ms * 1000;
 	int cpu = smp_processor_id();
-	u64 tb = get_tb();
+	u64 tb;
 
+	if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
+		return;
+
+	tb = get_tb();
 	if (tb - per_cpu(wd_timer_tb, cpu) >= ticks) {
 		per_cpu(wd_timer_tb, cpu) = tb;
 		wd_smp_clear_cpu_pending(cpu, tb);
-- 
2.34.1

[PATCH 4.19 183/239] i2c: i801: Dont silently correct invalid transfer size

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit effa453168a7eeb8a562ff4edc1dbf9067360a61 ]

If an invalid block size is provided, reject it instead of silently
changing it to a supported value. Especially critical I see the case of
a write transfer with block length 0. In this case we have no guarantee
that the byte we would write is valid. When silently reducing a read to
32 bytes then we don't return an error and the caller may falsely
assume that we returned the full requested data.

If this change should break any (broken) caller, then I think we should
fix the caller.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-i801.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index efafd028c5d16..fb0ddaad87d2e 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -774,6 +774,11 @@ static int i801_block_transaction(struct i801_priv *priv,
 	int result = 0;
 	unsigned char hostc;
 
+	if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
+		data->block[0] = I2C_SMBUS_BLOCK_MAX;
+	else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+		return -EPROTO;
+
 	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
 		if (read_write == I2C_SMBUS_WRITE) {
 			/* set I2C_EN bit in configuration register */
@@ -787,16 +792,6 @@ static int i801_block_transaction(struct i801_priv *priv,
 		}
 	}
 
-	if (read_write == I2C_SMBUS_WRITE
-	 || command == I2C_SMBUS_I2C_BLOCK_DATA) {
-		if (data->block[0] < 1)
-			data->block[0] = 1;
-		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
-			data->block[0] = I2C_SMBUS_BLOCK_MAX;
-	} else {
-		data->block[0] = 32;	/* max for SMBus block reads */
-	}
-
 	/* Experience has shown that the block buffer can only be used for
 	   SMBus (not I2C) block transactions, even though the datasheet
 	   doesn't mention this limitation. */
-- 
2.34.1

[PATCH 4.19 184/239] powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit a4ac0d249a5db80e79d573db9e4ad29354b643a8 ]

setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled.

Fixes the following W=1 warning when CONFIG_PROFILING=n:
  linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/smp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 14adfeacfa46e..4853ac67cf21f 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1070,10 +1070,12 @@ void start_secondary(void *unused)
 	BUG();
 }
 
+#ifdef CONFIG_PROFILING
 int setup_profiling_timer(unsigned int multiplier)
 {
 	return 0;
 }
+#endif
 
 #ifdef CONFIG_SCHED_SMT
 /* cpumask of CPUs with asymetric SMT dependancy */
-- 
2.34.1

[PATCH 4.19 185/239] i2c: mpc: Correct I2C reset procedure

[Greg Kroah-Hartman]

From: Joakim Tjernlund <joakim.tjernlund@infinera.com>

[ Upstream commit ebe82cf92cd4825c3029434cabfcd2f1780e64be ]

Current I2C reset procedure is broken in two ways:
1) It only generate 1 START instead of 9 STARTs and STOP.
2) It leaves the bus Busy so every I2C xfer after the first
   fixup calls the reset routine again, for every xfer there after.

This fixes both errors.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mpc.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index af349661fd769..8de8296d25831 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -105,23 +105,30 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
  * the bus, because it wants to send ACK.
  * Following sequence of enabling/disabling and sending start/stop generates
- * the 9 pulses, so it's all OK.
+ * the 9 pulses, each with a START then ending with STOP, so it's all OK.
  */
 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
 {
 	int k;
-	u32 delay_val = 1000000 / i2c->real_clk + 1;
-
-	if (delay_val < 2)
-		delay_val = 2;
+	unsigned long flags;
 
 	for (k = 9; k; k--) {
 		writeccr(i2c, 0);
-		writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+		writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */
+		writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */
+		readb(i2c->base + MPC_I2C_DR); /* init xfer */
+		udelay(15); /* let it hit the bus */
+		local_irq_save(flags); /* should not be delayed further */
+		writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */
 		readb(i2c->base + MPC_I2C_DR);
-		writeccr(i2c, CCR_MEN);
-		udelay(delay_val << 1);
+		if (k != 1)
+			udelay(5);
+		local_irq_restore(flags);
 	}
+	writeccr(i2c, CCR_MEN); /* Initiate STOP */
+	readb(i2c->base + MPC_I2C_DR);
+	udelay(15); /* Let STOP propagate */
+	writeccr(i2c, 0);
 }
 
 static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
-- 
2.34.1

[PATCH 4.19 186/239] w1: Misuse of get_user()/put_user() reported by sparse

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 33dc3e3e99e626ce51f462d883b05856c6c30b1d ]

sparse warnings: (new ones prefixed by >>)
>> drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char [noderef] __user *_pu_addr @@     got char *buf @@
   drivers/w1/slaves/w1_ds28e04.c:342:13: sparse:     expected char [noderef] __user *_pu_addr
   drivers/w1/slaves/w1_ds28e04.c:342:13: sparse:     got char *buf
>> drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char const [noderef] __user *_gu_addr @@     got char const *buf @@
   drivers/w1/slaves/w1_ds28e04.c:356:13: sparse:     expected char const [noderef] __user *_gu_addr
   drivers/w1/slaves/w1_ds28e04.c:356:13: sparse:     got char const *buf

The buffer buf is a failsafe buffer in kernel space, it's not user
memory hence doesn't deserve the use of get_user() or put_user().

Access 'buf' content directly.

Link: https://lore.kernel.org/lkml/202111190526.K5vb7NWC-lkp@intel.com/T/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/d14ed8d71ad4372e6839ae427f91441d3ba0e94d.1637946316.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/w1/slaves/w1_ds28e04.c | 26 ++++++--------------------
 1 file changed, 6 insertions(+), 20 deletions(-)

diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c
index ec234b846eb3c..e5eb19a34ee2a 100644
--- a/drivers/w1/slaves/w1_ds28e04.c
+++ b/drivers/w1/slaves/w1_ds28e04.c
@@ -34,7 +34,7 @@ static int w1_strong_pullup = 1;
 module_param_named(strong_pullup, w1_strong_pullup, int, 0);
 
 /* enable/disable CRC checking on DS28E04-100 memory accesses */
-static char w1_enable_crccheck = 1;
+static bool w1_enable_crccheck = true;
 
 #define W1_EEPROM_SIZE		512
 #define W1_PAGE_COUNT		16
@@ -341,32 +341,18 @@ static BIN_ATTR_RW(pio, 1);
 static ssize_t crccheck_show(struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
-	if (put_user(w1_enable_crccheck + 0x30, buf))
-		return -EFAULT;
-
-	return sizeof(w1_enable_crccheck);
+	return sysfs_emit(buf, "%d\n", w1_enable_crccheck);
 }
 
 static ssize_t crccheck_store(struct device *dev, struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
-	char val;
-
-	if (count != 1 || !buf)
-		return -EINVAL;
+	int err = kstrtobool(buf, &w1_enable_crccheck);
 
-	if (get_user(val, buf))
-		return -EFAULT;
+	if (err)
+		return err;
 
-	/* convert to decimal */
-	val = val - 0x30;
-	if (val != 0 && val != 1)
-		return -EINVAL;
-
-	/* set the new value */
-	w1_enable_crccheck = val;
-
-	return sizeof(w1_enable_crccheck);
+	return count;
 }
 
 static DEVICE_ATTR_RW(crccheck);
-- 
2.34.1

[PATCH 4.19 187/239] ALSA: seq: Set upper limit of processed events

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 6fadb494a638d8b8a55864ecc6ac58194f03f327 ]

Currently ALSA sequencer core tries to process the queued events as
much as possible when they become dispatchable.  If applications try
to queue too massive events to be processed at the very same timing,
the sequencer core would still try to process such all events, either
in the interrupt context or via some notifier; in either away, it
might be a cause of RCU stall or such problems.

As a potential workaround for those problems, this patch adds the
upper limit of the amount of events to be processed.  The remaining
events are processed in the next batch, so they won't be lost.

For the time being, it's limited up to 1000 events per queue, which
should be high enough for any normal usages.

Reported-by: Zqiang <qiang.zhang1211@gmail.com>
Reported-by: syzbot+bb950e68b400ab4f65f8@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211102033222.3849-1-qiang.zhang1211@gmail.com
Link: https://lore.kernel.org/r/20211207165146.2888-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_queue.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/sound/core/seq/seq_queue.c b/sound/core/seq/seq_queue.c
index 28b4dd45b8d1d..a23ba648db845 100644
--- a/sound/core/seq/seq_queue.c
+++ b/sound/core/seq/seq_queue.c
@@ -247,12 +247,15 @@ struct snd_seq_queue *snd_seq_queue_find_name(char *name)
 
 /* -------------------------------------------------------- */
 
+#define MAX_CELL_PROCESSES_IN_QUEUE	1000
+
 void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
 {
 	unsigned long flags;
 	struct snd_seq_event_cell *cell;
 	snd_seq_tick_time_t cur_tick;
 	snd_seq_real_time_t cur_time;
+	int processed = 0;
 
 	if (q == NULL)
 		return;
@@ -275,6 +278,8 @@ void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
 		if (!cell)
 			break;
 		snd_seq_dispatch_event(cell, atomic, hop);
+		if (++processed >= MAX_CELL_PROCESSES_IN_QUEUE)
+			goto out; /* the rest processed at the next batch */
 	}
 
 	/* Process time queue... */
@@ -284,14 +289,19 @@ void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
 		if (!cell)
 			break;
 		snd_seq_dispatch_event(cell, atomic, hop);
+		if (++processed >= MAX_CELL_PROCESSES_IN_QUEUE)
+			goto out; /* the rest processed at the next batch */
 	}
 
+ out:
 	/* free lock */
 	spin_lock_irqsave(&q->check_lock, flags);
 	if (q->check_again) {
 		q->check_again = 0;
-		spin_unlock_irqrestore(&q->check_lock, flags);
-		goto __again;
+		if (processed < MAX_CELL_PROCESSES_IN_QUEUE) {
+			spin_unlock_irqrestore(&q->check_lock, flags);
+			goto __again;
+		}
 	}
 	q->check_blocked = 0;
 	spin_unlock_irqrestore(&q->check_lock, flags);
-- 
2.34.1

[PATCH 4.19 188/239] powerpc: handle kdump appropriately with crash_kexec_post_notifiers option

[Greg Kroah-Hartman]

From: Hari Bathini <hbathini@linux.ibm.com>

[ Upstream commit 219572d2fc4135b5ce65c735d881787d48b10e71 ]

Kdump can be triggered after panic_notifers since commit f06e5153f4ae2
("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump
after panic_notifers") introduced crash_kexec_post_notifiers option.
But using this option would mean smp_send_stop(), that marks all other
CPUs as offline, gets called before kdump is triggered. As a result,
kdump routines fail to save other CPUs' registers. To fix this, kdump
friendly crash_smp_send_stop() function was introduced with kernel
commit 0ee59413c967 ("x86/panic: replace smp_send_stop() with kdump
friendly version in panic path"). Override this kdump friendly weak
function to handle crash_kexec_post_notifiers option appropriately
on powerpc.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
[Fixed signature of crash_stop_this_cpu() - reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207103719.91117-1-hbathini@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/smp.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 4853ac67cf21f..60fc3c71aa7b0 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -564,6 +564,36 @@ void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
 }
 #endif
 
+#ifdef CONFIG_NMI_IPI
+static void crash_stop_this_cpu(struct pt_regs *regs)
+#else
+static void crash_stop_this_cpu(void *dummy)
+#endif
+{
+	/*
+	 * Just busy wait here and avoid marking CPU as offline to ensure
+	 * register data is captured appropriately.
+	 */
+	while (1)
+		cpu_relax();
+}
+
+void crash_smp_send_stop(void)
+{
+	static bool stopped = false;
+
+	if (stopped)
+		return;
+
+	stopped = true;
+
+#ifdef CONFIG_NMI_IPI
+	smp_send_nmi_ipi(NMI_IPI_ALL_OTHERS, crash_stop_this_cpu, 1000000);
+#else
+	smp_call_function(crash_stop_this_cpu, NULL, 0);
+#endif /* CONFIG_NMI_IPI */
+}
+
 #ifdef CONFIG_NMI_IPI
 static void nmi_stop_this_cpu(struct pt_regs *regs)
 {
-- 
2.34.1

[PATCH 4.19 189/239] MIPS: OCTEON: add put_device() after of_find_device_by_node()

[Greg Kroah-Hartman]

From: Ye Guojin <ye.guojin@zte.com.cn>

[ Upstream commit 858779df1c0787d3fec827fb705708df9ebdb15b ]

This was found by coccicheck:
./arch/mips/cavium-octeon/octeon-platform.c, 332, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 324, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-platform.c, 395, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 387, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-usb.c, 512, 3-9, ERROR missing
put_device; call of_find_device_by_node on line 515, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-usb.c, 543, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 515, but without a
corresponding object release within this function.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/cavium-octeon/octeon-platform.c | 2 ++
 arch/mips/cavium-octeon/octeon-usb.c      | 1 +
 2 files changed, 3 insertions(+)

diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index 5ba181e87d2c1..4d83f5bc7211c 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -328,6 +328,7 @@ static int __init octeon_ehci_device_init(void)
 
 	pd->dev.platform_data = &octeon_ehci_pdata;
 	octeon_ehci_hw_start(&pd->dev);
+	put_device(&pd->dev);
 
 	return ret;
 }
@@ -391,6 +392,7 @@ static int __init octeon_ohci_device_init(void)
 
 	pd->dev.platform_data = &octeon_ohci_pdata;
 	octeon_ohci_hw_start(&pd->dev);
+	put_device(&pd->dev);
 
 	return ret;
 }
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
index 75189ff2f3c78..3465452e28195 100644
--- a/arch/mips/cavium-octeon/octeon-usb.c
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -543,6 +543,7 @@ static int __init dwc3_octeon_device_init(void)
 			devm_iounmap(&pdev->dev, base);
 			devm_release_mem_region(&pdev->dev, res->start,
 						resource_size(res));
+			put_device(&pdev->dev);
 		}
 	} while (node != NULL);
 
-- 
2.34.1

[PATCH 4.19 190/239] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters

[Greg Kroah-Hartman]

From: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>

[ Upstream commit d52097010078c1844348dc0e467305e5f90fd317 ]

The data type of hcnt and lcnt in the struct dw_i2c_dev is of type u16.
It's better to have same data type in struct dw_scl_sda_cfg as well.

Reported-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index d50f804872149..4e6b3fb01c7a6 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -36,10 +36,10 @@ enum dw_pci_ctl_id_t {
 };
 
 struct dw_scl_sda_cfg {
-	u32 ss_hcnt;
-	u32 fs_hcnt;
-	u32 ss_lcnt;
-	u32 fs_lcnt;
+	u16 ss_hcnt;
+	u16 fs_hcnt;
+	u16 ss_lcnt;
+	u16 fs_lcnt;
 	u32 sda_hold;
 };
 
-- 
2.34.1

[PATCH 4.19 191/239] MIPS: Octeon: Fix build errors using clang

[Greg Kroah-Hartman]

From: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>

[ Upstream commit 95339b70677dc6f9a2d669c4716058e71b8dc1c7 ]

A large number of the following errors is reported when compiling
with clang:

  cvmx-bootinfo.h:326:3: error: adding 'int' to a string does not append to the string [-Werror,-Wstring-plus-int]
                  ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NULL)
                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
          case x: return(#x + 16);        /* Skip CVMX_BOARD_TYPE_ */
                         ~~~^~~~
  cvmx-bootinfo.h:326:3: note: use array indexing to silence this warning
  cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
          case x: return(#x + 16);        /* Skip CVMX_BOARD_TYPE_ */
                          ^

Follow the prompts to use the address operator '&' to fix this error.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/octeon/cvmx-bootinfo.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index 62787765575ef..ce6e5fddce0bf 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -315,7 +315,7 @@ enum cvmx_chip_types_enum {
 
 /* Functions to return string based on type */
 #define ENUM_BRD_TYPE_CASE(x) \
-	case x: return(#x + 16);	/* Skip CVMX_BOARD_TYPE_ */
+	case x: return (&#x[16]);	/* Skip CVMX_BOARD_TYPE_ */
 static inline const char *cvmx_board_type_to_string(enum
 						    cvmx_board_types_enum type)
 {
@@ -404,7 +404,7 @@ static inline const char *cvmx_board_type_to_string(enum
 }
 
 #define ENUM_CHIP_TYPE_CASE(x) \
-	case x: return(#x + 15);	/* Skip CVMX_CHIP_TYPE */
+	case x: return (&#x[15]);	/* Skip CVMX_CHIP_TYPE */
 static inline const char *cvmx_chip_type_to_string(enum
 						   cvmx_chip_types_enum type)
 {
-- 
2.34.1

[PATCH 4.19 192/239] scsi: sr: Dont use GFP_DMA

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit d94d94969a4ba07a43d62429c60372320519c391 ]

The allocated buffers are used as a command payload, for which the block
layer and/or DMA API do the proper bounce buffering if needed.

Link: https://lore.kernel.org/r/20211222090842.920724-1-hch@lst.de
Reported-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sr.c        | 2 +-
 drivers/scsi/sr_vendor.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 84dd776d36c33..fdbd5c691d333 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -885,7 +885,7 @@ static void get_capabilities(struct scsi_cd *cd)
 
 
 	/* allocate transfer buffer */
-	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+	buffer = kmalloc(512, GFP_KERNEL);
 	if (!buffer) {
 		sr_printk(KERN_ERR, cd, "out of memory.\n");
 		return;
diff --git a/drivers/scsi/sr_vendor.c b/drivers/scsi/sr_vendor.c
index b9db2ec6d0361..996bccadd3866 100644
--- a/drivers/scsi/sr_vendor.c
+++ b/drivers/scsi/sr_vendor.c
@@ -113,7 +113,7 @@ int sr_set_blocklength(Scsi_CD *cd, int blocklength)
 	if (cd->vendor == VENDOR_TOSHIBA)
 		density = (blocklength > 2048) ? 0x81 : 0x83;
 
-	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+	buffer = kmalloc(512, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
 
@@ -161,7 +161,7 @@ int sr_cd_check(struct cdrom_device_info *cdi)
 	if (cd->cdi.mask & CDC_MULTI_SESSION)
 		return 0;
 
-	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+	buffer = kmalloc(512, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
 
-- 
2.34.1

[PATCH 4.19 193/239] ASoC: mediatek: mt8173: fix device_node leak

[Greg Kroah-Hartman]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 493433785df0075afc0c106ab65f10a605d0b35d ]

Fixes the device_node leak.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211224064719.2031210-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/mediatek/mt8173/mt8173-max98090.c      | 3 +++
 sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 ++
 sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c | 2 ++
 sound/soc/mediatek/mt8173/mt8173-rt5650.c        | 2 ++
 4 files changed, 9 insertions(+)

diff --git a/sound/soc/mediatek/mt8173/mt8173-max98090.c b/sound/soc/mediatek/mt8173/mt8173-max98090.c
index 902d111016d6f..431ba3db17594 100644
--- a/sound/soc/mediatek/mt8173/mt8173-max98090.c
+++ b/sound/soc/mediatek/mt8173/mt8173-max98090.c
@@ -169,6 +169,9 @@ static int mt8173_max98090_dev_probe(struct platform_device *pdev)
 	if (ret)
 		dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
 			__func__, ret);
+
+	of_node_put(codec_node);
+	of_node_put(platform_node);
 	return ret;
 }
 
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
index 582174d98c6c9..cdb3940710379 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
@@ -217,6 +217,8 @@ static int mt8173_rt5650_rt5514_dev_probe(struct platform_device *pdev)
 	if (ret)
 		dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
 			__func__, ret);
+
+	of_node_put(platform_node);
 	return ret;
 }
 
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
index b3670c8a5b8de..242f99716c619 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
@@ -274,6 +274,8 @@ static int mt8173_rt5650_rt5676_dev_probe(struct platform_device *pdev)
 	if (ret)
 		dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
 			__func__, ret);
+
+	of_node_put(platform_node);
 	return ret;
 }
 
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650.c b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
index 7a89b4aad182f..14011a70bcc41 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
@@ -301,6 +301,8 @@ static int mt8173_rt5650_dev_probe(struct platform_device *pdev)
 	if (ret)
 		dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
 			__func__, ret);
+
+	of_node_put(platform_node);
 	return ret;
 }
 
-- 
2.34.1

[PATCH 4.19 194/239] power: bq25890: Enable continuous conversion for ADC at charging

[Greg Kroah-Hartman]

From: Yauhen Kharuzhy <jekhor@gmail.com>

[ Upstream commit 80211be1b9dec04cc2805d3d81e2091ecac289a1 ]

Instead of one shot run of ADC at beginning of charging, run continuous
conversion to ensure that all charging-related values are monitored
properly (input voltage, input current, themperature etc.).

Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/bq25890_charger.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index 8e2c41ded171c..e90253b3f6561 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -521,12 +521,12 @@ static void bq25890_handle_state_change(struct bq25890_device *bq,
 
 	if (!new_state->online) {			     /* power removed */
 		/* disable ADC */
-		ret = bq25890_field_write(bq, F_CONV_START, 0);
+		ret = bq25890_field_write(bq, F_CONV_RATE, 0);
 		if (ret < 0)
 			goto error;
 	} else if (!old_state.online) {			    /* power inserted */
 		/* enable ADC, to have control of charge current/voltage */
-		ret = bq25890_field_write(bq, F_CONV_START, 1);
+		ret = bq25890_field_write(bq, F_CONV_RATE, 1);
 		if (ret < 0)
 			goto error;
 	}
-- 
2.34.1

[PATCH 4.19 195/239] rpmsg: core: Clean up resources on announce_create failure.

[Greg Kroah-Hartman]

From: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>

commit 8066c615cb69b7da8a94f59379847b037b3a5e46 upstream.

During the rpmsg_dev_probe, if rpdev->ops->announce_create returns an
error, the rpmsg device and default endpoint should be freed before
exiting the function.

Fixes: 5e619b48677c ("rpmsg: Split rpmsg core and virtio backend")
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211206190758.10004-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/rpmsg_core.c |   20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -473,13 +473,25 @@ static int rpmsg_dev_probe(struct device
 	err = rpdrv->probe(rpdev);
 	if (err) {
 		dev_err(dev, "%s: failed: %d\n", __func__, err);
-		if (ept)
-			rpmsg_destroy_ept(ept);
-		goto out;
+		goto destroy_ept;
 	}
 
-	if (ept && rpdev->ops->announce_create)
+	if (ept && rpdev->ops->announce_create) {
 		err = rpdev->ops->announce_create(rpdev);
+		if (err) {
+			dev_err(dev, "failed to announce creation\n");
+			goto remove_rpdev;
+		}
+	}
+
+	return 0;
+
+remove_rpdev:
+	if (rpdrv->remove)
+		rpdrv->remove(rpdev);
+destroy_ept:
+	if (ept)
+		rpmsg_destroy_ept(ept);
 out:
 	return err;
 }

[PATCH 4.19 196/239] ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffers

[Greg Kroah-Hartman]

From: Petr Cvachoucek <cvachoucek@gmail.com>

commit 3fea4d9d160186617ff40490ae01f4f4f36b28ff upstream.

it seems freeing the write buffers in the error path of the
ubifs_remount_rw() is wrong. It leads later to a kernel oops like this:

[10016.431274] UBIFS (ubi0:0): start fixing up free space
[10090.810042] UBIFS (ubi0:0): free space fixup complete
[10090.814623] UBIFS error (ubi0:0 pid 512): ubifs_remount_fs: cannot
spawn "ubifs_bgt0_0", error -4
[10101.915108] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started,
PID 517
[10105.275498] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000030
[10105.284352] Mem abort info:
[10105.287160]   ESR = 0x96000006
[10105.290252]   EC = 0x25: DABT (current EL), IL = 32 bits
[10105.295592]   SET = 0, FnV = 0
[10105.298652]   EA = 0, S1PTW = 0
[10105.301848] Data abort info:
[10105.304723]   ISV = 0, ISS = 0x00000006
[10105.308573]   CM = 0, WnR = 0
[10105.311564] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000f03d1000
[10105.318034] [0000000000000030] pgd=00000000f6cee003,
pud=00000000f4884003, pmd=0000000000000000
[10105.326783] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[10105.332355] Modules linked in: ath10k_pci ath10k_core ath mac80211
libarc4 cfg80211 nvme nvme_core cryptodev(O)
[10105.342468] CPU: 3 PID: 518 Comm: touch Tainted: G           O
5.4.3 #1
[10105.349517] Hardware name: HYPEX CPU (DT)
[10105.353525] pstate: 40000005 (nZcv daif -PAN -UAO)
[10105.358324] pc : atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34
[10105.364596] lr : mutex_lock+0x1c/0x34
[10105.368253] sp : ffff000075633aa0
[10105.371563] x29: ffff000075633aa0 x28: 0000000000000001
[10105.376874] x27: ffff000076fa80c8 x26: 0000000000000004
[10105.382185] x25: 0000000000000030 x24: 0000000000000000
[10105.387495] x23: 0000000000000000 x22: 0000000000000038
[10105.392807] x21: 000000000000000c x20: ffff000076fa80c8
[10105.398119] x19: ffff000076fa8000 x18: 0000000000000000
[10105.403429] x17: 0000000000000000 x16: 0000000000000000
[10105.408741] x15: 0000000000000000 x14: fefefefefefefeff
[10105.414052] x13: 0000000000000000 x12: 0000000000000fe0
[10105.419364] x11: 0000000000000fe0 x10: ffff000076709020
[10105.424675] x9 : 0000000000000000 x8 : 00000000000000a0
[10105.429986] x7 : ffff000076fa80f4 x6 : 0000000000000030
[10105.435297] x5 : 0000000000000000 x4 : 0000000000000000
[10105.440609] x3 : 0000000000000000 x2 : ffff00006f276040
[10105.445920] x1 : ffff000075633ab8 x0 : 0000000000000030
[10105.451232] Call trace:
[10105.453676]  atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34
[10105.459600]  ubifs_garbage_collect+0xb4/0x334
[10105.463956]  ubifs_budget_space+0x398/0x458
[10105.468139]  ubifs_create+0x50/0x180
[10105.471712]  path_openat+0x6a0/0x9b0
[10105.475284]  do_filp_open+0x34/0x7c
[10105.478771]  do_sys_open+0x78/0xe4
[10105.482170]  __arm64_sys_openat+0x1c/0x24
[10105.486180]  el0_svc_handler+0x84/0xc8
[10105.489928]  el0_svc+0x8/0xc
[10105.492808] Code: 52800013 17fffffb d2800003 f9800011 (c85ffc05)
[10105.498903] ---[ end trace 46b721d93267a586 ]---

To reproduce the problem:

1. Filesystem initially mounted read-only, free space fixup flag set.

2. mount -o remount,rw <mountpoint>

3. it takes some time (free space fixup running)
    ... try to terminate running mount by CTRL-C
    ... does not respond, only after free space fixup is complete
    ... then "ubifs_remount_fs: cannot spawn "ubifs_bgt0_0", error -4"

4. mount -o remount,rw <mountpoint>
    ... now finished instantly (fixup already done).

5. Create file or just unmount the filesystem and we get the oops.

Cc: <stable@vger.kernel.org>
Fixes: b50b9f408502 ("UBIFS: do not free write-buffers when in R/O mode")
Signed-off-by: Petr Cvachoucek <cvachoucek@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ubifs/super.c |    1 -
 1 file changed, 1 deletion(-)

--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1730,7 +1730,6 @@ out:
 		kthread_stop(c->bgt);
 		c->bgt = NULL;
 	}
-	free_wbufs(c);
 	kfree(c->write_reserve_buf);
 	c->write_reserve_buf = NULL;
 	vfree(c->ileb_buf);

[PATCH 4.19 197/239] serial: Fix incorrect rs485 polarity on uart open

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit d3b3404df318504ec084213ab1065b73f49b0f1d upstream.

Commit a6845e1e1b78 ("serial: core: Consider rs485 settings to drive
RTS") sought to deassert RTS when opening an rs485-enabled uart port.
That way, the transceiver does not occupy the bus until it transmits
data.

Unfortunately, the commit mixed up the logic and *asserted* RTS instead
of *deasserting* it:

The commit amended uart_port_dtr_rts(), which raises DTR and RTS when
opening an rs232 port.  "Raising" actually means lowering the signal
that's coming out of the uart, because an rs232 transceiver not only
changes a signal's voltage level, it also *inverts* the signal.  See
the simplified schematic in the MAX232 datasheet for an example:
https://www.ti.com/lit/ds/symlink/max232.pdf

So, to raise RTS on an rs232 port, TIOCM_RTS is *set* in port->mctrl
and that results in the signal being driven low.

In contrast to rs232, the signal level for rs485 Transmit Enable is the
identity, not the inversion:  If the transceiver expects a "high" RTS
signal for Transmit Enable, the signal coming out of the uart must also
be high, so TIOCM_RTS must be *cleared* in port->mctrl.

The commit did the exact opposite, but it's easy to see why given the
confusing semantics of rs232 and rs485.  Fix it.

Fixes: a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS")
Cc: stable@vger.kernel.org # v4.14+
Cc: Rafael Gago Castano <rgc@hms.se>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Su Bao Cheng <baocheng.su@siemens.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/9395767847833f2f3193c49cde38501eeb3b5669.1639821059.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/serial_core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -159,7 +159,7 @@ static void uart_port_dtr_rts(struct uar
 	int RTS_after_send = !!(uport->rs485.flags & SER_RS485_RTS_AFTER_SEND);
 
 	if (raise) {
-		if (rs485_on && !RTS_after_send) {
+		if (rs485_on && RTS_after_send) {
 			uart_set_mctrl(uport, TIOCM_DTR);
 			uart_clear_mctrl(uport, TIOCM_RTS);
 		} else {
@@ -168,7 +168,7 @@ static void uart_port_dtr_rts(struct uar
 	} else {
 		unsigned int clear = TIOCM_DTR;
 
-		clear |= (!rs485_on || !RTS_after_send) ? TIOCM_RTS : 0;
+		clear |= (!rs485_on || RTS_after_send) ? TIOCM_RTS : 0;
 		uart_clear_mctrl(uport, clear);
 	}
 }

[PATCH 4.19 198/239] cputime, cpuacct: Include guest time in user time in cpuacct.stat

[Greg Kroah-Hartman]

From: Andrey Ryabinin <arbn@yandex-team.com>

commit 9731698ecb9c851f353ce2496292ff9fcea39dff upstream.

cpuacct.stat in no-root cgroups shows user time without guest time
included int it. This doesn't match with user time shown in root
cpuacct.stat and /proc/<pid>/stat. This also affects cgroup2's cpu.stat
in the same way.

Make account_guest_time() to add user time to cgroup's cpustat to
fix this.

Fixes: ef12fefabf94 ("cpuacct: add per-cgroup utime/stime statistics")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211115164607.23784-1-arbn@yandex-team.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/sched/cputime.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -146,10 +146,10 @@ void account_guest_time(struct task_stru
 
 	/* Add guest time to cpustat. */
 	if (task_nice(p) > 0) {
-		cpustat[CPUTIME_NICE] += cputime;
+		task_group_account_field(p, CPUTIME_NICE, cputime);
 		cpustat[CPUTIME_GUEST_NICE] += cputime;
 	} else {
-		cpustat[CPUTIME_USER] += cputime;
+		task_group_account_field(p, CPUTIME_USER, cputime);
 		cpustat[CPUTIME_GUEST] += cputime;
 	}
 }

[PATCH 4.19 199/239] iwlwifi: mvm: Increase the scan timeout guard to 30 seconds

[Greg Kroah-Hartman]

From: Ilan Peer <ilan.peer@intel.com>

commit ced50f1133af12f7521bb777fcf4046ca908fb77 upstream.

With the introduction of 6GHz channels the scan guard timeout should
be adjusted to account for the following extreme case:

- All 6GHz channels are scanned passively: 58 channels.
- The scan is fragmented with the following parameters: 3 fragments,
  95 TUs suspend time, 44 TUs maximal out of channel time.

The above would result with scan time of more than 24 seconds. Thus,
set the timeout to 30 seconds.

Cc: stable@vger.kernel.org
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -1555,7 +1555,7 @@ static int iwl_mvm_check_running_scans(s
 	return -EIO;
 }
 
-#define SCAN_TIMEOUT 20000
+#define SCAN_TIMEOUT 30000
 
 void iwl_mvm_scan_timeout_wk(struct work_struct *work)
 {

[PATCH 4.19 200/239] s390/mm: fix 2KB pgtable release race

[Greg Kroah-Hartman]

From: Alexander Gordeev <agordeev@linux.ibm.com>

commit c2c224932fd0ee6854d6ebfc8d059c2bcad86606 upstream.

There is a race on concurrent 2KB-pgtables release paths when
both upper and lower halves of the containing parent page are
freed, one via page_table_free_rcu() + __tlb_remove_table(),
and the other via page_table_free(). The race might lead to a
corruption as result of remove of list item in page_table_free()
concurrently with __free_page() in __tlb_remove_table().

Let's assume first the lower and next the upper 2KB-pgtables are
freed from a page. Since both halves of the page are allocated
the tracking byte (bits 24-31 of the page _refcount) has value
of 0x03 initially:

CPU0				CPU1
----				----

page_table_free_rcu() // lower half
{
	// _refcount[31..24] == 0x03
	...
	atomic_xor_bits(&page->_refcount,
			0x11U << (0 + 24));
	// _refcount[31..24] <= 0x12
	...
	table = table | (1U << 0);
	tlb_remove_table(tlb, table);
}
...
__tlb_remove_table()
{
	// _refcount[31..24] == 0x12
	mask = _table & 3;
	// mask <= 0x01
	...

				page_table_free() // upper half
				{
					// _refcount[31..24] == 0x12
					...
					atomic_xor_bits(
						&page->_refcount,
						1U << (1 + 24));
					// _refcount[31..24] <= 0x10
					// mask <= 0x10
					...
	atomic_xor_bits(&page->_refcount,
			mask << (4 + 24));
	// _refcount[31..24] <= 0x00
	// mask <= 0x00
	...
	if (mask != 0) // == false
		break;
	fallthrough;
	...
					if (mask & 3) // == false
						...
					else
	__free_page(page);			list_del(&page->lru);
	^^^^^^^^^^^^^^^^^^	RACE!		^^^^^^^^^^^^^^^^^^^^^
}					...
				}

The problem is page_table_free() releases the page as result of
lower nibble unset and __tlb_remove_table() observing zero too
early. With this update page_table_free() will use the similar
logic as page_table_free_rcu() + __tlb_remove_table(), and mark
the fragment as pending for removal in the upper nibble until
after the list_del().

In other words, the parent page is considered as unreferenced and
safe to release only when the lower nibble is cleared already and
unsetting a bit in upper nibble results in that nibble turned zero.

Cc: stable@vger.kernel.org
Suggested-by: Vlastimil Babka <vbabka@suse.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/mm/pgalloc.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@@ -256,13 +256,15 @@ void page_table_free(struct mm_struct *m
 		/* Free 2K page table fragment of a 4K page */
 		bit = (__pa(table) & ~PAGE_MASK)/(PTRS_PER_PTE*sizeof(pte_t));
 		spin_lock_bh(&mm->context.lock);
-		mask = atomic_xor_bits(&page->_refcount, 1U << (bit + 24));
+		mask = atomic_xor_bits(&page->_refcount, 0x11U << (bit + 24));
 		mask >>= 24;
 		if (mask & 3)
 			list_add(&page->lru, &mm->context.pgtable_list);
 		else
 			list_del(&page->lru);
 		spin_unlock_bh(&mm->context.lock);
+		mask = atomic_xor_bits(&page->_refcount, 0x10U << (bit + 24));
+		mask >>= 24;
 		if (mask != 0)
 			return;
 	} else {

[PATCH 4.19 201/239] drm/etnaviv: limit submit sizes

[Greg Kroah-Hartman]

From: Lucas Stach <l.stach@pengutronix.de>

commit 6dfa2fab8ddd46faa771a102672176bee7a065de upstream.

Currently we allow rediculous amounts of kernel memory being allocated
via the etnaviv GEM_SUBMIT ioctl, which is a pretty easy DoS vector. Put
some reasonable limits in to fix this.

The commandstream size is limited to 64KB, which was already a soft limit
on older kernels after which the kernel only took submits on a best effort
base, so there is no userspace that tries to submit commandstreams larger
than this. Even if the whole commandstream is a single incrementing address
load, the size limit also limits the number of potential relocs and
referenced buffers to slightly under 64K, so use the same limit for those
arguments. The performance monitoring infrastructure currently supports
less than 50 performance counter signals, so limiting them to 128 on a
single submit seems like a reasonably future-proof number for now. This
number can be bumped if needed without breaking the interface.

Cc: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
@@ -444,6 +444,12 @@ int etnaviv_ioctl_gem_submit(struct drm_
 		return -EINVAL;
 	}
 
+	if (args->stream_size > SZ_64K || args->nr_relocs > SZ_64K ||
+	    args->nr_bos > SZ_64K || args->nr_pmrs > 128) {
+		DRM_ERROR("submit arguments out of size limits\n");
+		return -EINVAL;
+	}
+
 	/*
 	 * Copy the command submission and bo array to kernel space in
 	 * one go, and do this outside of any locks.

[PATCH 4.19 202/239] ext4: make sure to reset inode lockdep class when quota enabling fails

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit 4013d47a5307fdb5c13370b5392498b00fedd274 upstream.

When we succeed in enabling some quota type but fail to enable another
one with quota feature, we correctly disable all enabled quota types.
However we forget to reset i_data_sem lockdep class. When the inode gets
freed and reused, it will inherit this lockdep class (i_data_sem is
initialized only when a slab is created) and thus eventually lockdep
barfs about possible deadlocks.

Reported-and-tested-by: syzbot+3b6f9218b1301ddda3e2@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/super.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5883,8 +5883,19 @@ static int ext4_enable_quotas(struct sup
 					"Failed to enable quota tracking "
 					"(type=%d, err=%d). Please run "
 					"e2fsck to fix.", type, err);
-				for (type--; type >= 0; type--)
+				for (type--; type >= 0; type--) {
+					struct inode *inode;
+
+					inode = sb_dqopt(sb)->files[type];
+					if (inode)
+						inode = igrab(inode);
 					dquot_quota_off(sb, type);
+					if (inode) {
+						lockdep_set_quota_inode(inode,
+							I_DATA_SEM_NORMAL);
+						iput(inode);
+					}
+				}
 
 				return err;
 			}

[PATCH 4.19 203/239] ext4: make sure quota gets properly shutdown on error

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit 15fc69bbbbbc8c72e5f6cc4e1be0f51283c5448e upstream.

When we hit an error when enabling quotas and setting inode flags, we do
not properly shutdown quota subsystem despite returning error from
Q_QUOTAON quotactl. This can lead to some odd situations like kernel
using quota file while it is still writeable for userspace. Make sure we
properly cleanup the quota subsystem in case of error.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/super.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5797,10 +5797,7 @@ static int ext4_quota_on(struct super_bl
 
 	lockdep_set_quota_inode(path->dentry->d_inode, I_DATA_SEM_QUOTA);
 	err = dquot_quota_on(sb, type, format_id, path);
-	if (err) {
-		lockdep_set_quota_inode(path->dentry->d_inode,
-					     I_DATA_SEM_NORMAL);
-	} else {
+	if (!err) {
 		struct inode *inode = d_inode(path->dentry);
 		handle_t *handle;
 
@@ -5820,7 +5817,12 @@ static int ext4_quota_on(struct super_bl
 		ext4_journal_stop(handle);
 	unlock_inode:
 		inode_unlock(inode);
+		if (err)
+			dquot_quota_off(sb, type);
 	}
+	if (err)
+		lockdep_set_quota_inode(path->dentry->d_inode,
+					     I_DATA_SEM_NORMAL);
 	return err;
 }
 

[PATCH 4.19 204/239] ext4: set csum seed in tmp inode while migrating to extents

[Greg Kroah-Hartman]

From: Luís Henriques <lhenriques@suse.de>

commit e81c9302a6c3c008f5c30beb73b38adb0170ff2d upstream.

When migrating to extents, the temporary inode will have it's own checksum
seed.  This means that, when swapping the inodes data, the inode checksums
will be incorrect.

This can be fixed by recalculating the extents checksums again.  Or simply
by copying the seed into the temporary inode.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357
Reported-by: Jeroen van Wolffelaar <jeroen@wolffelaar.nl>
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20211214175058.19511-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/migrate.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -477,6 +477,17 @@ int ext4_ext_migrate(struct inode *inode
 		ext4_journal_stop(handle);
 		goto out_unlock;
 	}
+	/*
+	 * Use the correct seed for checksum (i.e. the seed from 'inode').  This
+	 * is so that the metadata blocks will have the correct checksum after
+	 * the migration.
+	 *
+	 * Note however that, if a crash occurs during the migration process,
+	 * the recovery process is broken because the tmp_inode checksums will
+	 * be wrong and the orphans cleanup will fail.
+	 */
+	ei = EXT4_I(inode);
+	EXT4_I(tmp_inode)->i_csum_seed = ei->i_csum_seed;
 	i_size_write(tmp_inode, i_size_read(inode));
 	/*
 	 * Set the i_nlink to zero so it will be deleted later
@@ -520,7 +531,6 @@ int ext4_ext_migrate(struct inode *inode
 		goto out_tmp_inode;
 	}
 
-	ei = EXT4_I(inode);
 	i_data = ei->i_data;
 	memset(&lb, 0, sizeof(lb));
 

[PATCH 4.19 205/239] ext4: Fix BUG_ON in ext4_bread when write quota data

[Greg Kroah-Hartman]

From: Ye Bin <yebin10@huawei.com>

commit 380a0091cab482489e9b19e07f2a166ad2b76d5c upstream.

We got issue as follows when run syzkaller:
[  167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user
[  167.938306] EXT4-fs (loop0): Remounting filesystem read-only
[  167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0'
[  167.983601] ------------[ cut here ]------------
[  167.984245] kernel BUG at fs/ext4/inode.c:847!
[  167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[  167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G    B             5.16.0-rc5-next-20211217+ #123
[  167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[  167.988590] RIP: 0010:ext4_getblk+0x17e/0x504
[  167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244
[  167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282
[  167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000
[  167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66
[  167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09
[  167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8
[  167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001
[  167.997158] FS:  00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000
[  167.998238] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0
[  167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  168.001899] Call Trace:
[  168.002235]  <TASK>
[  168.007167]  ext4_bread+0xd/0x53
[  168.007612]  ext4_quota_write+0x20c/0x5c0
[  168.010457]  write_blk+0x100/0x220
[  168.010944]  remove_free_dqentry+0x1c6/0x440
[  168.011525]  free_dqentry.isra.0+0x565/0x830
[  168.012133]  remove_tree+0x318/0x6d0
[  168.014744]  remove_tree+0x1eb/0x6d0
[  168.017346]  remove_tree+0x1eb/0x6d0
[  168.019969]  remove_tree+0x1eb/0x6d0
[  168.022128]  qtree_release_dquot+0x291/0x340
[  168.023297]  v2_release_dquot+0xce/0x120
[  168.023847]  dquot_release+0x197/0x3e0
[  168.024358]  ext4_release_dquot+0x22a/0x2d0
[  168.024932]  dqput.part.0+0x1c9/0x900
[  168.025430]  __dquot_drop+0x120/0x190
[  168.025942]  ext4_clear_inode+0x86/0x220
[  168.026472]  ext4_evict_inode+0x9e8/0xa22
[  168.028200]  evict+0x29e/0x4f0
[  168.028625]  dispose_list+0x102/0x1f0
[  168.029148]  evict_inodes+0x2c1/0x3e0
[  168.030188]  generic_shutdown_super+0xa4/0x3b0
[  168.030817]  kill_block_super+0x95/0xd0
[  168.031360]  deactivate_locked_super+0x85/0xd0
[  168.031977]  cleanup_mnt+0x2bc/0x480
[  168.033062]  task_work_run+0xd1/0x170
[  168.033565]  do_exit+0xa4f/0x2b50
[  168.037155]  do_group_exit+0xef/0x2d0
[  168.037666]  __x64_sys_exit_group+0x3a/0x50
[  168.038237]  do_syscall_64+0x3b/0x90
[  168.038751]  entry_SYSCALL_64_after_hwframe+0x44/0xae

In order to reproduce this problem, the following conditions need to be met:
1. Ext4 filesystem with no journal;
2. Filesystem image with incorrect quota data;
3. Abort filesystem forced by user;
4. umount filesystem;

As in ext4_quota_write:
...
         if (EXT4_SB(sb)->s_journal && !handle) {
                 ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
                         " cancelled because transaction is not started",
                         (unsigned long long)off, (unsigned long long)len);
                 return -EIO;
         }
...
We only check handle if NULL when filesystem has journal. There is need
check handle if NULL even when filesystem has no journal.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/super.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5999,7 +5999,7 @@ static ssize_t ext4_quota_write(struct s
 	struct buffer_head *bh;
 	handle_t *handle = journal_current_handle();
 
-	if (EXT4_SB(sb)->s_journal && !handle) {
+	if (!handle) {
 		ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
 			" cancelled because transaction is not started",
 			(unsigned long long)off, (unsigned long long)len);

[PATCH 4.19 206/239] ext4: dont use the orphan list when migrating an inode

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit 6eeaf88fd586f05aaf1d48cb3a139d2a5c6eb055 upstream.

We probably want to remove the indirect block to extents migration
feature after a deprecation window, but until then, let's fix a
potential data loss problem caused by the fact that we put the
tmp_inode on the orphan list.  In the unlikely case where we crash and
do a journal recovery, the data blocks belonging to the inode being
migrated are also represented in the tmp_inode on the orphan list ---
and so its data blocks will get marked unallocated, and available for
reuse.

Instead, stop putting the tmp_inode on the oprhan list.  So in the
case where we crash while migrating the inode, we'll leak an inode,
which is not a disaster.  It will be easily fixed the next time we run
fsck, and it's better than potentially having blocks getting claimed
by two different files, and losing data as a result.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/migrate.c |   19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -455,12 +455,12 @@ int ext4_ext_migrate(struct inode *inode
 	percpu_down_write(&sbi->s_writepages_rwsem);
 
 	/*
-	 * Worst case we can touch the allocation bitmaps, a bgd
-	 * block, and a block to link in the orphan list.  We do need
-	 * need to worry about credits for modifying the quota inode.
+	 * Worst case we can touch the allocation bitmaps and a block
+	 * group descriptor block.  We do need need to worry about
+	 * credits for modifying the quota inode.
 	 */
 	handle = ext4_journal_start(inode, EXT4_HT_MIGRATE,
-		4 + EXT4_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb));
+		3 + EXT4_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb));
 
 	if (IS_ERR(handle)) {
 		retval = PTR_ERR(handle);
@@ -481,10 +481,6 @@ int ext4_ext_migrate(struct inode *inode
 	 * Use the correct seed for checksum (i.e. the seed from 'inode').  This
 	 * is so that the metadata blocks will have the correct checksum after
 	 * the migration.
-	 *
-	 * Note however that, if a crash occurs during the migration process,
-	 * the recovery process is broken because the tmp_inode checksums will
-	 * be wrong and the orphans cleanup will fail.
 	 */
 	ei = EXT4_I(inode);
 	EXT4_I(tmp_inode)->i_csum_seed = ei->i_csum_seed;
@@ -496,7 +492,6 @@ int ext4_ext_migrate(struct inode *inode
 	clear_nlink(tmp_inode);
 
 	ext4_ext_tree_init(handle, tmp_inode);
-	ext4_orphan_add(handle, tmp_inode);
 	ext4_journal_stop(handle);
 
 	/*
@@ -521,12 +516,6 @@ int ext4_ext_migrate(struct inode *inode
 
 	handle = ext4_journal_start(inode, EXT4_HT_MIGRATE, 1);
 	if (IS_ERR(handle)) {
-		/*
-		 * It is impossible to update on-disk structures without
-		 * a handle, so just rollback in-core changes and live other
-		 * work to orphan_list_cleanup()
-		 */
-		ext4_orphan_del(NULL, tmp_inode);
 		retval = PTR_ERR(handle);
 		goto out_tmp_inode;
 	}

[PATCH 4.19 207/239] crypto: stm32/crc32 - Fix kernel BUG triggered in probe()

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

commit 29009604ad4e3ef784fd9b9fef6f23610ddf633d upstream.

The include/linux/crypto.h struct crypto_alg field cra_driver_name description
states "Unique name of the transformation provider. " ... " this contains the
name of the chip or provider and the name of the transformation algorithm."

In case of the stm32-crc driver, field cra_driver_name is identical for all
registered transformation providers and set to the name of the driver itself,
which is incorrect. This patch fixes it by assigning a unique cra_driver_name
to each registered transformation provider.

The kernel crash is triggered when the driver calls crypto_register_shashes()
which calls crypto_register_shash(), which calls crypto_register_alg(), which
calls __crypto_register_alg(), which returns -EEXIST, which is propagated
back through this call chain. Upon -EEXIST from crypto_register_shash(), the
crypto_register_shashes() starts unregistering the providers back, and calls
crypto_unregister_shash(), which calls crypto_unregister_alg(), and this is
where the BUG() triggers due to incorrect cra_refcnt.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: <stable@vger.kernel.org> # 4.12+
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@st.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Lionel Debieve <lionel.debieve@st.com>
Cc: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-crypto@vger.kernel.org
Acked-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/stm32/stm32_crc32.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/crypto/stm32/stm32_crc32.c
+++ b/drivers/crypto/stm32/stm32_crc32.c
@@ -230,7 +230,7 @@ static struct shash_alg algs[] = {
 		.digestsize     = CHKSUM_DIGEST_SIZE,
 		.base           = {
 			.cra_name               = "crc32",
-			.cra_driver_name        = DRIVER_NAME,
+			.cra_driver_name        = "stm32-crc32-crc32",
 			.cra_priority           = 200,
 			.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
 			.cra_blocksize          = CHKSUM_BLOCK_SIZE,
@@ -252,7 +252,7 @@ static struct shash_alg algs[] = {
 		.digestsize     = CHKSUM_DIGEST_SIZE,
 		.base           = {
 			.cra_name               = "crc32c",
-			.cra_driver_name        = DRIVER_NAME,
+			.cra_driver_name        = "stm32-crc32-crc32c",
 			.cra_priority           = 200,
 			.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
 			.cra_blocksize          = CHKSUM_BLOCK_SIZE,

[PATCH 4.19 208/239] ASoC: dpcm: prevent snd_soc_dpcm use after free

[Greg Kroah-Hartman]

From: KaiChieh Chuang <kaichieh.chuang@mediatek.com>

commit a9764869779081e8bf24da07ac040e8f3efcf13a upstream.

The dpcm get from fe_clients/be_clients
may be free before use

Add a spin lock at snd_soc_card level,
to protect the dpcm instance.
The lock may be used in atomic context, so use spin lock.

Use irq spin lock version,
since the lock may be used in interrupts.

possible race condition between
void dpcm_be_disconnect(
	...
	list_del(&dpcm->list_be);
	list_del(&dpcm->list_fe);
	kfree(dpcm);
	...

and
	for_each_dpcm_fe()
	for_each_dpcm_be*()

race condition example
Thread 1:
    snd_soc_dapm_mixer_update_power()
        -> soc_dpcm_runtime_update()
            -> dpcm_be_disconnect()
                -> kfree(dpcm);
Thread 2:
    dpcm_fe_dai_trigger()
        -> dpcm_be_dai_trigger()
            -> snd_soc_dpcm_can_be_free_stop()
                -> if (dpcm->fe == fe)

Excpetion Scenario:
	two FE link to same BE
	FE1 -> BE
	FE2 ->

	Thread 1: switch of mixer between FE2 -> BE
	Thread 2: pcm_stop FE1

Exception:

Unable to handle kernel paging request at virtual address dead0000000000e0

pc=<> [<ffffff8960e2cd10>] dpcm_be_dai_trigger+0x29c/0x47c
	sound/soc/soc-pcm.c:3226
		if (dpcm->fe == fe)
lr=<> [<ffffff8960e2f694>] dpcm_fe_dai_do_trigger+0x94/0x26c

Backtrace:
[<ffffff89602dba80>] notify_die+0x68/0xb8
[<ffffff896028c7dc>] die+0x118/0x2a8
[<ffffff89602a2f84>] __do_kernel_fault+0x13c/0x14c
[<ffffff89602a27f4>] do_translation_fault+0x64/0xa0
[<ffffff8960280cf8>] do_mem_abort+0x4c/0xd0
[<ffffff8960282ad0>] el1_da+0x24/0x40
[<ffffff8960e2cd10>] dpcm_be_dai_trigger+0x29c/0x47c
[<ffffff8960e2f694>] dpcm_fe_dai_do_trigger+0x94/0x26c
[<ffffff8960e2edec>] dpcm_fe_dai_trigger+0x3c/0x44
[<ffffff8960de5588>] snd_pcm_do_stop+0x50/0x5c
[<ffffff8960dded24>] snd_pcm_action+0xb4/0x13c
[<ffffff8960ddfdb4>] snd_pcm_drop+0xa0/0x128
[<ffffff8960de69bc>] snd_pcm_common_ioctl+0x9d8/0x30f0
[<ffffff8960de1cac>] snd_pcm_ioctl_compat+0x29c/0x2f14
[<ffffff89604c9d60>] compat_SyS_ioctl+0x128/0x244
[<ffffff8960283740>] el0_svc_naked+0x34/0x38
[<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
[willmcvicker: move spinlock to bottom of struct snd_soc_card]
Signed-off-by: Will McVicker <willmcvicker@google.com>
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/sound/soc.h  |    2 ++
 sound/soc/soc-core.c |    1 +
 sound/soc/soc-pcm.c  |   40 +++++++++++++++++++++++++++++++++-------
 3 files changed, 36 insertions(+), 7 deletions(-)

--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -1113,6 +1113,8 @@ struct snd_soc_card {
 	u32 pop_time;
 
 	void *drvdata;
+
+	spinlock_t dpcm_lock;
 };
 
 /* SoC machine DAI configuration, glues a codec and cpu DAI together */
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2752,6 +2752,7 @@ int snd_soc_register_card(struct snd_soc
 	card->instantiated = 0;
 	mutex_init(&card->mutex);
 	mutex_init(&card->dapm_mutex);
+	spin_lock_init(&card->dpcm_lock);
 
 	ret = snd_soc_instantiate_card(card);
 	if (ret != 0)
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -1221,6 +1221,7 @@ static int dpcm_be_connect(struct snd_so
 		struct snd_soc_pcm_runtime *be, int stream)
 {
 	struct snd_soc_dpcm *dpcm;
+	unsigned long flags;
 
 	/* only add new dpcms */
 	list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be) {
@@ -1236,8 +1237,10 @@ static int dpcm_be_connect(struct snd_so
 	dpcm->fe = fe;
 	be->dpcm[stream].runtime = fe->dpcm[stream].runtime;
 	dpcm->state = SND_SOC_DPCM_LINK_STATE_NEW;
+	spin_lock_irqsave(&fe->card->dpcm_lock, flags);
 	list_add(&dpcm->list_be, &fe->dpcm[stream].be_clients);
 	list_add(&dpcm->list_fe, &be->dpcm[stream].fe_clients);
+	spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
 
 	dev_dbg(fe->dev, "connected new DPCM %s path %s %s %s\n",
 			stream ? "capture" : "playback",  fe->dai_link->name,
@@ -1283,6 +1286,7 @@ static void dpcm_be_reparent(struct snd_
 void dpcm_be_disconnect(struct snd_soc_pcm_runtime *fe, int stream)
 {
 	struct snd_soc_dpcm *dpcm, *d;
+	unsigned long flags;
 
 	list_for_each_entry_safe(dpcm, d, &fe->dpcm[stream].be_clients, list_be) {
 		dev_dbg(fe->dev, "ASoC: BE %s disconnect check for %s\n",
@@ -1302,8 +1306,10 @@ void dpcm_be_disconnect(struct snd_soc_p
 #ifdef CONFIG_DEBUG_FS
 		debugfs_remove(dpcm->debugfs_state);
 #endif
+		spin_lock_irqsave(&fe->card->dpcm_lock, flags);
 		list_del(&dpcm->list_be);
 		list_del(&dpcm->list_fe);
+		spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
 		kfree(dpcm);
 	}
 }
@@ -1557,10 +1563,13 @@ int dpcm_process_paths(struct snd_soc_pc
 void dpcm_clear_pending_state(struct snd_soc_pcm_runtime *fe, int stream)
 {
 	struct snd_soc_dpcm *dpcm;
+	unsigned long flags;
 
+	spin_lock_irqsave(&fe->card->dpcm_lock, flags);
 	list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be)
 		dpcm->be->dpcm[stream].runtime_update =
 						SND_SOC_DPCM_UPDATE_NO;
+	spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
 }
 
 static void dpcm_be_dai_startup_unwind(struct snd_soc_pcm_runtime *fe,
@@ -2626,6 +2635,7 @@ static int dpcm_run_update_startup(struc
 	struct snd_soc_dpcm *dpcm;
 	enum snd_soc_dpcm_trigger trigger = fe->dai_link->trigger[stream];
 	int ret;
+	unsigned long flags;
 
 	dev_dbg(fe->dev, "ASoC: runtime %s open on FE %s\n",
 			stream ? "capture" : "playback", fe->dai_link->name);
@@ -2695,11 +2705,13 @@ close:
 	dpcm_be_dai_shutdown(fe, stream);
 disconnect:
 	/* disconnect any non started BEs */
+	spin_lock_irqsave(&fe->card->dpcm_lock, flags);
 	list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be) {
 		struct snd_soc_pcm_runtime *be = dpcm->be;
 		if (be->dpcm[stream].state != SND_SOC_DPCM_STATE_START)
 				dpcm->state = SND_SOC_DPCM_LINK_STATE_FREE;
 	}
+	spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
 
 	return ret;
 }
@@ -3278,7 +3290,10 @@ int snd_soc_dpcm_can_be_free_stop(struct
 {
 	struct snd_soc_dpcm *dpcm;
 	int state;
+	int ret = 1;
+	unsigned long flags;
 
+	spin_lock_irqsave(&fe->card->dpcm_lock, flags);
 	list_for_each_entry(dpcm, &be->dpcm[stream].fe_clients, list_fe) {
 
 		if (dpcm->fe == fe)
@@ -3287,12 +3302,15 @@ int snd_soc_dpcm_can_be_free_stop(struct
 		state = dpcm->fe->dpcm[stream].state;
 		if (state == SND_SOC_DPCM_STATE_START ||
 			state == SND_SOC_DPCM_STATE_PAUSED ||
-			state == SND_SOC_DPCM_STATE_SUSPEND)
-			return 0;
+			state == SND_SOC_DPCM_STATE_SUSPEND) {
+			ret = 0;
+			break;
+		}
 	}
+	spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
 
 	/* it's safe to free/stop this BE DAI */
-	return 1;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(snd_soc_dpcm_can_be_free_stop);
 
@@ -3305,7 +3323,10 @@ int snd_soc_dpcm_can_be_params(struct sn
 {
 	struct snd_soc_dpcm *dpcm;
 	int state;
+	int ret = 1;
+	unsigned long flags;
 
+	spin_lock_irqsave(&fe->card->dpcm_lock, flags);
 	list_for_each_entry(dpcm, &be->dpcm[stream].fe_clients, list_fe) {
 
 		if (dpcm->fe == fe)
@@ -3315,12 +3336,15 @@ int snd_soc_dpcm_can_be_params(struct sn
 		if (state == SND_SOC_DPCM_STATE_START ||
 			state == SND_SOC_DPCM_STATE_PAUSED ||
 			state == SND_SOC_DPCM_STATE_SUSPEND ||
-			state == SND_SOC_DPCM_STATE_PREPARE)
-			return 0;
+			state == SND_SOC_DPCM_STATE_PREPARE) {
+			ret = 0;
+			break;
+		}
 	}
+	spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
 
 	/* it's safe to change hw_params */
-	return 1;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(snd_soc_dpcm_can_be_params);
 
@@ -3359,6 +3383,7 @@ static ssize_t dpcm_show_state(struct sn
 	struct snd_pcm_hw_params *params = &fe->dpcm[stream].hw_params;
 	struct snd_soc_dpcm *dpcm;
 	ssize_t offset = 0;
+	unsigned long flags;
 
 	/* FE state */
 	offset += scnprintf(buf + offset, size - offset,
@@ -3386,6 +3411,7 @@ static ssize_t dpcm_show_state(struct sn
 		goto out;
 	}
 
+	spin_lock_irqsave(&fe->card->dpcm_lock, flags);
 	list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be) {
 		struct snd_soc_pcm_runtime *be = dpcm->be;
 		params = &dpcm->hw_params;
@@ -3406,7 +3432,7 @@ static ssize_t dpcm_show_state(struct sn
 				params_channels(params),
 				params_rate(params));
 	}
-
+	spin_unlock_irqrestore(&fe->card->dpcm_lock, flags);
 out:
 	return offset;
 }

[PATCH 4.19 209/239] regulator: core: Let boot-on regulators be powered off

[Greg Kroah-Hartman]

From: Pascal Paillet <p.paillet@st.com>

commit 089b3f61ecfc43ca4ea26d595e1d31ead6de3f7b upstream.

Boot-on regulators are always kept on because their use_count value
is now incremented at boot time and never cleaned.

Only increment count value for alway-on regulators.
regulator_late_cleanup() is now able to power off boot-on regulators
when unused.

Fixes: 05f224ca6693 ("regulator: core: Clean enabling always-on regulators + their supplies")
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Link: https://lore.kernel.org/r/20191113102737.27831-1-p.paillet@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Andre Kalb <andre.kalb@sma.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/regulator/core.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1211,7 +1211,9 @@ static int set_machine_constraints(struc
 			rdev_err(rdev, "failed to enable\n");
 			return ret;
 		}
-		rdev->use_count++;
+
+		if (rdev->constraints->always_on)
+			rdev->use_count++;
 	}
 
 	print_constraints(rdev);

[PATCH 4.19 210/239] drm/radeon: fix error handling in radeon_driver_open_kms

[Greg Kroah-Hartman]

From: Christian König <christian.koenig@amd.com>

commit 4722f463896cc0ef1a6f1c3cb2e171e949831249 upstream.

The return value was never initialized so the cleanup code executed when
it isn't even necessary.

Just add proper error handling.

Fixes: ab50cb9df889 ("drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()")
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/radeon/radeon_kms.c |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -641,18 +641,18 @@ int radeon_driver_open_kms(struct drm_de
 		fpriv = kzalloc(sizeof(*fpriv), GFP_KERNEL);
 		if (unlikely(!fpriv)) {
 			r = -ENOMEM;
-			goto out_suspend;
+			goto err_suspend;
 		}
 
 		if (rdev->accel_working) {
 			vm = &fpriv->vm;
 			r = radeon_vm_init(rdev, vm);
 			if (r)
-				goto out_fpriv;
+				goto err_fpriv;
 
 			r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false);
 			if (r)
-				goto out_vm_fini;
+				goto err_vm_fini;
 
 			/* map the ib pool buffer read only into
 			 * virtual address space */
@@ -660,7 +660,7 @@ int radeon_driver_open_kms(struct drm_de
 							rdev->ring_tmp_bo.bo);
 			if (!vm->ib_bo_va) {
 				r = -ENOMEM;
-				goto out_vm_fini;
+				goto err_vm_fini;
 			}
 
 			r = radeon_vm_bo_set_addr(rdev, vm->ib_bo_va,
@@ -668,19 +668,21 @@ int radeon_driver_open_kms(struct drm_de
 						  RADEON_VM_PAGE_READABLE |
 						  RADEON_VM_PAGE_SNOOPED);
 			if (r)
-				goto out_vm_fini;
+				goto err_vm_fini;
 		}
 		file_priv->driver_priv = fpriv;
 	}
 
-	if (!r)
-		goto out_suspend;
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
+	return 0;
 
-out_vm_fini:
+err_vm_fini:
 	radeon_vm_fini(rdev, vm);
-out_fpriv:
+err_fpriv:
 	kfree(fpriv);
-out_suspend:
+
+err_suspend:
 	pm_runtime_mark_last_busy(dev->dev);
 	pm_runtime_put_autosuspend(dev->dev);
 	return r;

[PATCH 4.19 211/239] ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

commit ddb52945999dcf35787bf221b62108806182578d upstream.

In addition to using vcsi regulator for the display, looks like droid4 is
using vcsi regulator to trigger off mode internally with the PMIC firmware
when the SoC enters deeper idle states. This is configured in the Motorola
Mapphone Linux kernel sources as "zerov_regulator".

As we currently don't support off mode during idle for omap4, we must
prevent vcsi from being disabled when the display is blanked to prevent
the PMIC change to off mode. Otherwise the device will hang on entering
idle when the display is blanked.

Before commit 089b3f61ecfc ("regulator: core: Let boot-on regulators be
powered off"), the boot-on regulators never got disabled like they should
and vcsi did not get turned off on idle.

Let's fix the issue by setting vcsi to always-on for now. Later on we may
want to claim the vcsi regulator also in the PM code if needed.

Fixes: 089b3f61ecfc ("regulator: core: Let boot-on regulators be powered off")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -165,12 +165,12 @@
 		regulator-enable-ramp-delay = <1000>;
 	};
 
-	/* Used by DSS */
+	/* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */
 	vcsi: VCSI {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-enable-ramp-delay = <1000>;
-		regulator-boot-on;
+		regulator-always-on;
 	};
 
 	vdac: VDAC {

[PATCH 4.19 212/239] firmware: Update Kconfig help text for Google firmware

[Greg Kroah-Hartman]

From: Ben Hutchings <ben@decadent.org.uk>

commit d185a3466f0cd5af8f1c5c782c53bc0e6f2e7136 upstream.

The help text for GOOGLE_FIRMWARE states that it should only be
enabled when building a kernel for Google's own servers.  However,
many of the drivers dependent on it are also useful on Chromebooks or
on any platform using coreboot.

Update the help text to reflect this double duty.

Fixes: d384d6f43d1e ("firmware: google memconsole: Add coreboot support")
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Link: https://lore.kernel.org/r/20180618225540.GD14131@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/google/Kconfig |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/firmware/google/Kconfig
+++ b/drivers/firmware/google/Kconfig
@@ -2,9 +2,9 @@ menuconfig GOOGLE_FIRMWARE
 	bool "Google Firmware Drivers"
 	default n
 	help
-	  These firmware drivers are used by Google's servers.  They are
-	  only useful if you are working directly on one of their
-	  proprietary servers.  If in doubt, say "N".
+	  These firmware drivers are used by Google servers,
+	  Chromebooks and other devices using coreboot firmware.
+	  If in doubt, say "N".
 
 if GOOGLE_FIRMWARE
 

[PATCH 4.19 213/239] media: rcar-csi2: Optimize the selection PHTW register

[Greg Kroah-Hartman]

From: Suresh Udipi <sudipi@jp.adit-jv.com>

commit 549cc89cd09a85aaa16dc07ef3db811d5cf9bcb1 upstream.

PHTW register is selected based on default bit rate from Table[1].
for the bit rates less than or equal to 250. Currently first
value of default bit rate which is greater than or equal to
the caculated mbps is selected. This selection can be further
improved by selecting the default bit rate which is nearest to
the calculated value.

[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.12]

Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/platform/rcar-vin/rcar-csi2.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -843,10 +843,17 @@ static int rcsi2_phtw_write_mbps(struct
 				 const struct rcsi2_mbps_reg *values, u16 code)
 {
 	const struct rcsi2_mbps_reg *value;
+	const struct rcsi2_mbps_reg *prev_value = NULL;
 
-	for (value = values; value->mbps; value++)
+	for (value = values; value->mbps; value++) {
 		if (value->mbps >= mbps)
 			break;
+		prev_value = value;
+	}
+
+	if (prev_value &&
+	    ((mbps - prev_value->mbps) <= (value->mbps - mbps)))
+		value = prev_value;
 
 	if (!value->mbps) {
 		dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps);

[PATCH 4.19 214/239] Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization

[Greg Kroah-Hartman]

From: Lukas Bulwahn <lukas.bulwahn@gmail.com>

commit 82ca67321f55a8d1da6ac3ed611da3c32818bb37 upstream.

The config RANDOMIZE_SLAB does not exist, the authors probably intended to
refer to the config RANDOMIZE_BASE, which provides kernel address-space
randomization. They probably just confused SLAB with BASE (these two
four-letter words coincidentally share three common letters), as they also
point out the config SLAB_FREELIST_RANDOM as further randomization within
the same sentence.

Fix the reference of the config for kernel address-space randomization to
the config that provides that.

Fixes: 6e88559470f5 ("Documentation: Add section about CPU vulnerabilities for Spectre")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211230171940.27558-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/admin-guide/hw-vuln/spectre.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/admin-guide/hw-vuln/spectre.rst
+++ b/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -468,7 +468,7 @@ Spectre variant 2
    before invoking any firmware code to prevent Spectre variant 2 exploits
    using the firmware.
 
-   Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+   Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
    and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
    attacks on the kernel generally more difficult.
 

[PATCH 4.19 215/239] RDMA/hns: Modify the mapping attribute of doorbell to device

[Greg Kroah-Hartman]

From: Yixing Liu <liuyixing1@huawei.com>

commit 39d5534b1302189c809e90641ffae8cbdc42a8fc upstream.

It is more general for ARM device drivers to use the device attribute to
map PCI BAR spaces.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20211206133652.27476-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/hns/hns_roce_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/hw/hns/hns_roce_main.c
+++ b/drivers/infiniband/hw/hns/hns_roce_main.c
@@ -432,7 +432,7 @@ static int hns_roce_mmap(struct ib_ucont
 		return -EINVAL;
 
 	if (vma->vm_pgoff == 0) {
-		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+		vma->vm_page_prot = pgprot_device(vma->vm_page_prot);
 		if (io_remap_pfn_range(vma, vma->vm_start,
 				       to_hr_ucontext(context)->uar.pfn,
 				       PAGE_SIZE, vma->vm_page_prot))

[PATCH 4.19 216/239] RDMA/rxe: Fix a typo in opcode name

[Greg Kroah-Hartman]

From: Chengguang Xu <cgxu519@mykernel.net>

commit 8d1cfb884e881efd69a3be4ef10772c71cb22216 upstream.

There is a redundant ']' in the name of opcode IB_OPCODE_RC_SEND_MIDDLE,
so just fix it.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20211218112320.3558770-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/sw/rxe/rxe_opcode.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/sw/rxe/rxe_opcode.c
+++ b/drivers/infiniband/sw/rxe/rxe_opcode.c
@@ -137,7 +137,7 @@ struct rxe_opcode_info rxe_opcode[RXE_NU
 		}
 	},
 	[IB_OPCODE_RC_SEND_MIDDLE]		= {
-		.name	= "IB_OPCODE_RC_SEND_MIDDLE]",
+		.name	= "IB_OPCODE_RC_SEND_MIDDLE",
 		.mask	= RXE_PAYLOAD_MASK | RXE_REQ_MASK | RXE_SEND_MASK
 				| RXE_MIDDLE_MASK,
 		.length = RXE_BTH_BYTES,

[PATCH 4.19 217/239] dmaengine: stm32-mdma: fix STM32_MDMA_CTBR_TSEL_MASK

[Greg Kroah-Hartman]

From: Amelie Delaunay <amelie.delaunay@foss.st.com>

commit e7f110889a87307fb0fed408a5dee1707796ca04 upstream.

This patch fixes STM32_MDMA_CTBR_TSEL_MASK, which is [5:0], not [7:0].

Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211220165827.1238097-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/stm32-mdma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/dma/stm32-mdma.c
+++ b/drivers/dma/stm32-mdma.c
@@ -194,7 +194,7 @@
 #define STM32_MDMA_CTBR(x)		(0x68 + 0x40 * (x))
 #define STM32_MDMA_CTBR_DBUS		BIT(17)
 #define STM32_MDMA_CTBR_SBUS		BIT(16)
-#define STM32_MDMA_CTBR_TSEL_MASK	GENMASK(7, 0)
+#define STM32_MDMA_CTBR_TSEL_MASK	GENMASK(5, 0)
 #define STM32_MDMA_CTBR_TSEL(n)		STM32_MDMA_SET(n, \
 						      STM32_MDMA_CTBR_TSEL_MASK)
 

[PATCH 4.19 218/239] powerpc/cell: Fix clang -Wimplicit-fallthrough warning

[Greg Kroah-Hartman]

From: Anders Roxell <anders.roxell@linaro.org>

commit e89257e28e844f5d1d39081bb901d9f1183a7705 upstream.

Clang warns:

arch/powerpc/platforms/cell/pervasive.c:81:2: error: unannotated fall-through between switch labels
        case SRR1_WAKEEE:
        ^
arch/powerpc/platforms/cell/pervasive.c:81:2: note: insert 'break;' to avoid fall-through
        case SRR1_WAKEEE:
        ^
        break;
1 error generated.

Clang is more pedantic than GCC, which does not warn when failing
through to a case that is just break or return. Clang's version is more
in line with the kernel's own stance in deprecated.rst. Add athe missing
break to silence the warning.

Fixes: 6e83985b0f6e ("powerpc/cbe: Do not process external or decremeter interrupts from sreset")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207110228.698956-1-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/platforms/cell/pervasive.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -90,6 +90,7 @@ static int cbe_system_reset_exception(st
 	switch (regs->msr & SRR1_WAKEMASK) {
 	case SRR1_WAKEDEC:
 		set_dec(1);
+		break;
 	case SRR1_WAKEEE:
 		/*
 		 * Handle these when interrupts get re-enabled and we take

[PATCH 4.19 219/239] powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses

[Greg Kroah-Hartman]

From: Tobias Waldekranz <tobias@waldekranz.com>

commit 0d375d610fa96524e2ee2b46830a46a7bfa92a9f upstream.

This block is used in (at least) T1024 and T1040, including their
variants like T1023 etc.

Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
@@ -79,6 +79,7 @@ fman0: fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xfc000 0x1000>;
+		fsl,erratum-a009885;
 	};
 
 	xmdio0: mdio@fd000 {
@@ -86,6 +87,7 @@ fman0: fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xfd000 0x1000>;
+		fsl,erratum-a009885;
 	};
 };
 

[PATCH 4.19 220/239] net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module

[Greg Kroah-Hartman]

From: Tobias Waldekranz <tobias@waldekranz.com>

commit 3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream.

As reported by sparse: In the remove path, the driver would attempt to
unmap its own priv pointer - instead of the io memory that it mapped
in probe.

Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/xgmac_mdio.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -301,9 +301,10 @@ err_ioremap:
 static int xgmac_mdio_remove(struct platform_device *pdev)
 {
 	struct mii_bus *bus = platform_get_drvdata(pdev);
+	struct mdio_fsl_priv *priv = bus->priv;
 
 	mdiobus_unregister(bus);
-	iounmap(bus->priv);
+	iounmap(priv->mdio_base);
 	mdiobus_free(bus);
 
 	return 0;

[PATCH 4.19 221/239] parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

commit d24846a4246b6e61ecbd036880a4adf61681d241 upstream.

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：

   If this function returns an error, kobject_put() must be called to
   properly clean up the memory associated with the object.

Fix memory leak by calling kobject_put().

Fixes: 73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/parisc/pdc_stable.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -992,8 +992,10 @@ pdcs_register_pathentries(void)
 		entry->kobj.kset = paths_kset;
 		err = kobject_init_and_add(&entry->kobj, &ktype_pdcspath, NULL,
 					   "%s", entry->name);
-		if (err)
+		if (err) {
+			kobject_put(&entry->kobj);
 			return err;
+		}
 
 		/* kobject is now registered */
 		write_lock(&entry->rw_lock);

[PATCH 4.19 222/239] af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 9d6d7f1cb67cdee15f1a0e85aacfb924e0e02435 upstream.

wait_for_unix_gc() reads unix_tot_inflight & gc_in_progress
without synchronization.

Adds READ_ONCE()/WRITE_ONCE() and their associated comments
to better document the intent.

BUG: KCSAN: data-race in unix_inflight / wait_for_unix_gc

write to 0xffffffff86e2b7c0 of 4 bytes by task 9380 on cpu 0:
 unix_inflight+0x1e8/0x260 net/unix/scm.c:63
 unix_attach_fds+0x10c/0x1e0 net/unix/scm.c:121
 unix_scm_to_skb net/unix/af_unix.c:1674 [inline]
 unix_dgram_sendmsg+0x679/0x16b0 net/unix/af_unix.c:1817
 unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
 __do_sys_sendmmsg net/socket.c:2578 [inline]
 __se_sys_sendmmsg net/socket.c:2575 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffffffff86e2b7c0 of 4 bytes by task 9375 on cpu 1:
 wait_for_unix_gc+0x24/0x160 net/unix/garbage.c:196
 unix_dgram_sendmsg+0x8e/0x16b0 net/unix/af_unix.c:1772
 unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
 __do_sys_sendmmsg net/socket.c:2578 [inline]
 __se_sys_sendmmsg net/socket.c:2575 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000002 -> 0x00000004

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 9375 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 9915672d4127 ("af_unix: limit unix_tot_inflight")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220114164328.2038499-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/unix/garbage.c |   14 +++++++++++---
 net/unix/scm.c     |    6 ++++--
 2 files changed, 15 insertions(+), 5 deletions(-)

--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -197,8 +197,11 @@ void wait_for_unix_gc(void)
 {
 	/* If number of inflight sockets is insane,
 	 * force a garbage collect right now.
+	 * Paired with the WRITE_ONCE() in unix_inflight(),
+	 * unix_notinflight() and gc_in_progress().
 	 */
-	if (unix_tot_inflight > UNIX_INFLIGHT_TRIGGER_GC && !gc_in_progress)
+	if (READ_ONCE(unix_tot_inflight) > UNIX_INFLIGHT_TRIGGER_GC &&
+	    !READ_ONCE(gc_in_progress))
 		unix_gc();
 	wait_event(unix_gc_wait, gc_in_progress == false);
 }
@@ -218,7 +221,9 @@ void unix_gc(void)
 	if (gc_in_progress)
 		goto out;
 
-	gc_in_progress = true;
+	/* Paired with READ_ONCE() in wait_for_unix_gc(). */
+	WRITE_ONCE(gc_in_progress, true);
+
 	/* First, select candidates for garbage collection.  Only
 	 * in-flight sockets are considered, and from those only ones
 	 * which don't have any external reference.
@@ -304,7 +309,10 @@ void unix_gc(void)
 
 	/* All candidates should have been detached by now. */
 	BUG_ON(!list_empty(&gc_candidates));
-	gc_in_progress = false;
+
+	/* Paired with READ_ONCE() in wait_for_unix_gc(). */
+	WRITE_ONCE(gc_in_progress, false);
+
 	wake_up(&unix_gc_wait);
 
  out:
--- a/net/unix/scm.c
+++ b/net/unix/scm.c
@@ -56,7 +56,8 @@ void unix_inflight(struct user_struct *u
 		} else {
 			BUG_ON(list_empty(&u->link));
 		}
-		unix_tot_inflight++;
+		/* Paired with READ_ONCE() in wait_for_unix_gc() */
+		WRITE_ONCE(unix_tot_inflight, unix_tot_inflight + 1);
 	}
 	user->unix_inflight++;
 	spin_unlock(&unix_gc_lock);
@@ -76,7 +77,8 @@ void unix_notinflight(struct user_struct
 
 		if (atomic_long_dec_and_test(&u->inflight))
 			list_del_init(&u->link);
-		unix_tot_inflight--;
+		/* Paired with READ_ONCE() in wait_for_unix_gc() */
+		WRITE_ONCE(unix_tot_inflight, unix_tot_inflight - 1);
 	}
 	user->unix_inflight--;
 	spin_unlock(&unix_gc_lock);

[PATCH 4.19 223/239] net: axienet: Wait for PhyRstCmplt after core reset

[Greg Kroah-Hartman]

From: Robert Hancock <robert.hancock@calian.com>

commit b400c2f4f4c53c86594dd57098970d97d488bfde upstream.

When resetting the device, wait for the PhyRstCmplt bit to be set
in the interrupt status register before continuing initialization, to
ensure that the core is actually ready. When using an external PHY, this
also ensures we do not start trying to access the PHY while it is still
in reset. The PHY reset is initiated by the core reset which is
triggered just above, but remains asserted for 5ms after the core is
reset according to the documentation.

The MgtRdy bit could also be waited for, but unfortunately when using
7-series devices, the bit does not appear to work as documented (it
seems to behave as some sort of link state indication and not just an
indication the transceiver is ready) so it can't really be relied on for
this purpose.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -279,6 +279,16 @@ static int axienet_dma_bd_init(struct ne
 	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
 			  cr | XAXIDMA_CR_RUNSTOP_MASK);
 
+	/* Wait for PhyRstCmplt bit to be set, indicating the PHY reset has finished */
+	ret = read_poll_timeout(axienet_ior, value,
+				value & XAE_INT_PHYRSTCMPLT_MASK,
+				DELAY_OF_ONE_MILLISEC, 50000, false, lp,
+				XAE_IS_OFFSET);
+	if (ret) {
+		dev_err(lp->dev, "%s: timeout waiting for PhyRstCmplt\n", __func__);
+		return ret;
+	}
+
 	return 0;
 out:
 	axienet_dma_bd_release(ndev);

[PATCH 4.19 224/239] net: axienet: fix number of TX ring slots for available check

[Greg Kroah-Hartman]

From: Robert Hancock <robert.hancock@calian.com>

commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream.

The check for the number of available TX ring slots was off by 1 since a
slot is required for the skb header as well as each fragment. This could
result in overwriting a TX ring slot that was still in use.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -682,7 +682,7 @@ axienet_start_xmit(struct sk_buff *skb,
 	num_frag = skb_shinfo(skb)->nr_frags;
 	cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
 
-	if (axienet_check_tx_bd_space(lp, num_frag)) {
+	if (axienet_check_tx_bd_space(lp, num_frag + 1)) {
 		if (netif_queue_stopped(ndev))
 			return NETDEV_TX_BUSY;
 
@@ -692,7 +692,7 @@ axienet_start_xmit(struct sk_buff *skb,
 		smp_mb();
 
 		/* Space might have just been freed - check again */
-		if (axienet_check_tx_bd_space(lp, num_frag))
+		if (axienet_check_tx_bd_space(lp, num_frag + 1))
 			return NETDEV_TX_BUSY;
 
 		netif_wake_queue(ndev);

[PATCH 4.19 225/239] rtc: pxa: fix null pointer dereference

[Greg Kroah-Hartman]

From: Laurence de Bruxelles <lfdebrux@gmail.com>

commit 34127b3632b21e5c391756e724b1198eb9917981 upstream.

With the latest stable kernel versions the rtc on the PXA based
Zaurus does not work, when booting I see the following kernel messages:

pxa-rtc pxa-rtc: failed to find rtc clock source
pxa-rtc pxa-rtc: Unable to init SA1100 RTC sub-device
pxa-rtc: probe of pxa-rtc failed with error -2
hctosys: unable to open rtc device (rtc0)

I think this is because commit f2997775b111 ("rtc: sa1100: fix possible
race condition") moved the allocation of the rtc_device struct out of
sa1100_rtc_init and into sa1100_rtc_probe. This means that pxa_rtc_probe
also needs to do allocation for the rtc_device struct, otherwise
sa1100_rtc_init will try to dereference a null pointer. This patch adds
that allocation by copying how sa1100_rtc_probe in
drivers/rtc/rtc-sa1100.c does it; after the IRQs are set up a managed
rtc_device is allocated.

I've tested this patch with `qemu-system-arm -machine akita` and with a
real Zaurus SL-C1000 applied to 4.19, 5.4, and 5.10.

Signed-off-by: Laurence de Bruxelles <lfdebrux@gmail.com>
Fixes: f2997775b111 ("rtc: sa1100: fix possible race condition")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220101154149.12026-1-lfdebrux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-pxa.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -349,6 +349,10 @@ static int __init pxa_rtc_probe(struct p
 		return -ENXIO;
 	}
 
+	sa1100_rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(sa1100_rtc->rtc))
+		return PTR_ERR(sa1100_rtc->rtc);
+
 	pxa_rtc->base = devm_ioremap(dev, pxa_rtc->ress->start,
 				resource_size(pxa_rtc->ress));
 	if (!pxa_rtc->base) {

[PATCH 4.19 226/239] netns: add schedule point in ops_exit_list()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 2836615aa22de55b8fca5e32fe1b27a67cda625e upstream.

When under stress, cleanup_net() can have to dismantle
netns in big numbers. ops_exit_list() currently calls
many helpers [1] that have no schedule point, and we can
end up with soft lockups, particularly on hosts
with many cpus.

Even for moderate amount of netns processed by cleanup_net()
this patch avoids latency spikes.

[1] Some of these helpers like fib_sync_up() and fib_sync_down_dev()
are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables,
and ifindex is used as the only input of two hash functions.
    ifindexes tend to be the same for all netns (lo.ifindex==1 per instance)
    This will be fixed in a separate patch.

Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net_namespace.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -149,8 +149,10 @@ static void ops_exit_list(const struct p
 {
 	struct net *net;
 	if (ops->exit) {
-		list_for_each_entry(net, net_exit_list, exit_list)
+		list_for_each_entry(net, net_exit_list, exit_list) {
 			ops->exit(net);
+			cond_resched();
+		}
 	}
 	if (ops->exit_batch)
 		ops->exit_batch(net_exit_list);

[PATCH 4.19 227/239] libcxgb: Dont accidentally set RTO_ONLINK in cxgb_find_route()

[Greg Kroah-Hartman]

From: Guillaume Nault <gnault@redhat.com>

commit a915deaa9abe4fb3a440312c954253a6a733608e upstream.

Mask the ECN bits before calling ip_route_output_ports(). The tos
variable might be passed directly from an IPv4 header, so it may have
the last ECN bit set. This interferes with the route lookup process as
ip_route_output_key_hash() interpretes this bit specially (to restrict
the route scope).

Found by code inspection, compile tested only.

Fixes: 804c2f3e36ef ("libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c
+++ b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c
@@ -32,6 +32,7 @@
 
 #include <linux/tcp.h>
 #include <linux/ipv6.h>
+#include <net/inet_ecn.h>
 #include <net/route.h>
 #include <net/ip6_route.h>
 
@@ -99,7 +100,7 @@ cxgb_find_route(struct cxgb4_lld_info *l
 
 	rt = ip_route_output_ports(&init_net, &fl4, NULL, peer_ip, local_ip,
 				   peer_port, local_port, IPPROTO_TCP,
-				   tos, 0);
+				   tos & ~INET_ECN_MASK, 0);
 	if (IS_ERR(rt))
 		return NULL;
 	n = dst_neigh_lookup(&rt->dst, &peer_ip);

[PATCH 4.19 228/239] dmaengine: at_xdmac: Dont start transactions at tx_submit level

[Greg Kroah-Hartman]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

commit bccfb96b59179d4f96cbbd1ddff8fac6d335eae4 upstream.

tx_submit is supposed to push the current transaction descriptor to a
pending queue, waiting for issue_pending() to be called. issue_pending()
must start the transfer, not tx_submit(), thus remove
at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that
assume that tx_submit() starts the transfer must be updated and call
dma_async_issue_pending() if they miss to call it (one example is
atmel_serial).

As the at_xdmac_start_xfer() is now called only from
at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the
at_xdmac_chan_is_enabled() check is no longer needed in
at_xdmac_start_xfer(), thus remove it.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-2-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/at_xdmac.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -344,9 +344,6 @@ static void at_xdmac_start_xfer(struct a
 
 	dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, first);
 
-	if (at_xdmac_chan_is_enabled(atchan))
-		return;
-
 	/* Set transfer as active to not try to start it again. */
 	first->active_xfer = true;
 
@@ -430,9 +427,6 @@ static dma_cookie_t at_xdmac_tx_submit(s
 	dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
 		 __func__, atchan, desc);
 	list_add_tail(&desc->xfer_node, &atchan->xfers_list);
-	if (list_is_singular(&atchan->xfers_list))
-		at_xdmac_start_xfer(atchan, desc);
-
 	spin_unlock_irqrestore(&atchan->lock, irqflags);
 	return cookie;
 }

[PATCH 4.19 229/239] dmaengine: at_xdmac: Print debug message after realeasing the lock

[Greg Kroah-Hartman]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

commit 5edc24ac876a928f36f407a0fcdb33b94a3a210f upstream.

It is desirable to do the prints without the lock held if possible, so
move the print after the lock is released.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-4-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/at_xdmac.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -424,10 +424,12 @@ static dma_cookie_t at_xdmac_tx_submit(s
 	spin_lock_irqsave(&atchan->lock, irqflags);
 	cookie = dma_cookie_assign(tx);
 
-	dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
-		 __func__, atchan, desc);
 	list_add_tail(&desc->xfer_node, &atchan->xfers_list);
 	spin_unlock_irqrestore(&atchan->lock, irqflags);
+
+	dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
+		 __func__, atchan, desc);
+
 	return cookie;
 }
 

[PATCH 4.19 230/239] dmaengine: at_xdmac: Fix lld view setting

[Greg Kroah-Hartman]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

commit 1385eb4d14d447cc5d744bc2ac34f43be66c9963 upstream.

AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2,
because of the wrong bit handling. Fix it.

Fixes: ee0fe35c8dcd ("dmaengine: xdmac: Handle descriptor's view 3 registers")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-10-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/at_xdmac.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -100,6 +100,7 @@
 #define		AT_XDMAC_CNDC_NDE		(0x1 << 0)		/* Channel x Next Descriptor Enable */
 #define		AT_XDMAC_CNDC_NDSUP		(0x1 << 1)		/* Channel x Next Descriptor Source Update */
 #define		AT_XDMAC_CNDC_NDDUP		(0x1 << 2)		/* Channel x Next Descriptor Destination Update */
+#define		AT_XDMAC_CNDC_NDVIEW_MASK	GENMASK(28, 27)
 #define		AT_XDMAC_CNDC_NDVIEW_NDV0	(0x0 << 3)		/* Channel x Next Descriptor View 0 */
 #define		AT_XDMAC_CNDC_NDVIEW_NDV1	(0x1 << 3)		/* Channel x Next Descriptor View 1 */
 #define		AT_XDMAC_CNDC_NDVIEW_NDV2	(0x2 << 3)		/* Channel x Next Descriptor View 2 */
@@ -359,7 +360,8 @@ static void at_xdmac_start_xfer(struct a
 	 */
 	if (at_xdmac_chan_is_cyclic(atchan))
 		reg = AT_XDMAC_CNDC_NDVIEW_NDV1;
-	else if (first->lld.mbr_ubc & AT_XDMAC_MBR_UBC_NDV3)
+	else if ((first->lld.mbr_ubc &
+		  AT_XDMAC_CNDC_NDVIEW_MASK) == AT_XDMAC_MBR_UBC_NDV3)
 		reg = AT_XDMAC_CNDC_NDVIEW_NDV3;
 	else
 		reg = AT_XDMAC_CNDC_NDVIEW_NDV2;

[PATCH 4.19 231/239] dmaengine: at_xdmac: Fix at_xdmac_lld struct definition

[Greg Kroah-Hartman]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

commit 912f7c6f7fac273f40e621447cf17d14b50d6e5b upstream.

The hardware channel next descriptor view structure contains just
fields of 32 bits, while dma_addr_t can be of type u64 or u32
depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with
what the hardware expects.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-11-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/at_xdmac.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -232,15 +232,15 @@ struct at_xdmac {
 
 /* Linked List Descriptor */
 struct at_xdmac_lld {
-	dma_addr_t	mbr_nda;	/* Next Descriptor Member */
-	u32		mbr_ubc;	/* Microblock Control Member */
-	dma_addr_t	mbr_sa;		/* Source Address Member */
-	dma_addr_t	mbr_da;		/* Destination Address Member */
-	u32		mbr_cfg;	/* Configuration Register */
-	u32		mbr_bc;		/* Block Control Register */
-	u32		mbr_ds;		/* Data Stride Register */
-	u32		mbr_sus;	/* Source Microblock Stride Register */
-	u32		mbr_dus;	/* Destination Microblock Stride Register */
+	u32 mbr_nda;	/* Next Descriptor Member */
+	u32 mbr_ubc;	/* Microblock Control Member */
+	u32 mbr_sa;	/* Source Address Member */
+	u32 mbr_da;	/* Destination Address Member */
+	u32 mbr_cfg;	/* Configuration Register */
+	u32 mbr_bc;	/* Block Control Register */
+	u32 mbr_ds;	/* Data Stride Register */
+	u32 mbr_sus;	/* Source Microblock Stride Register */
+	u32 mbr_dus;	/* Destination Microblock Stride Register */
 };
 
 /* 64-bit alignment needed to update CNDA and CUBC registers in an atomic way. */

[PATCH 4.19 232/239] net_sched: restore "mpu xxx" handling

[Greg Kroah-Hartman]

From: Kevin Bracey <kevin@bracey.fi>

commit fb80445c438c78b40b547d12b8d56596ce4ccfeb upstream.

commit 56b765b79e9a ("htb: improved accuracy at high rates") broke
"overhead X", "linklayer atm" and "mpu X" attributes.

"overhead X" and "linklayer atm" have already been fixed. This restores
the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping:

    tc class add ... htb rate X overhead 4 mpu 64

The code being fixed is used by htb, tbf and act_police. Cake has its
own mpu handling. qdisc_calculate_pkt_len still uses the size table
containing values adjusted for mpu by user space.

iproute2 tc has always passed mpu into the kernel via a tc_ratespec
structure, but the kernel never directly acted on it, merely stored it
so that it could be read back by `tc class show`.

Rather, tc would generate length-to-time tables that included the mpu
(and linklayer) in their construction, and the kernel used those tables.

Since v3.7, the tables were no longer used. Along with "mpu", this also
broke "overhead" and "linklayer" which were fixed in 01cb71d2d47b
("net_sched: restore "overhead xxx" handling", v3.10) and 8a8e3d84b171
("net_sched: restore "linklayer atm" handling", v3.11).

"overhead" was fixed by simply restoring use of tc_ratespec::overhead -
this had originally been used by the kernel but was initially omitted
from the new non-table-based calculations.

"linklayer" had been handled in the table like "mpu", but the mode was
not originally passed in tc_ratespec. The new implementation was made to
handle it by getting new versions of tc to pass the mode in an extended
tc_ratespec, and for older versions of tc the table contents were analysed
at load time to deduce linklayer.

As "mpu" has always been given to the kernel in tc_ratespec,
accompanying the mpu-based table, we can restore system functionality
with no userspace change by making the kernel act on the tc_ratespec
value.

Fixes: 56b765b79e9a ("htb: improved accuracy at high rates")
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Vimalkumar <j.vimal@gmail.com>
Link: https://lore.kernel.org/r/20220112170210.1014351-1-kevin@bracey.fi
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/sch_generic.h |    5 +++++
 net/sched/sch_generic.c   |    1 +
 2 files changed, 6 insertions(+)

--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -1077,6 +1077,7 @@ struct psched_ratecfg {
 	u64	rate_bytes_ps; /* bytes per second */
 	u32	mult;
 	u16	overhead;
+	u16	mpu;
 	u8	linklayer;
 	u8	shift;
 };
@@ -1086,6 +1087,9 @@ static inline u64 psched_l2t_ns(const st
 {
 	len += r->overhead;
 
+	if (len < r->mpu)
+		len = r->mpu;
+
 	if (unlikely(r->linklayer == TC_LINKLAYER_ATM))
 		return ((u64)(DIV_ROUND_UP(len,48)*53) * r->mult) >> r->shift;
 
@@ -1108,6 +1112,7 @@ static inline void psched_ratecfg_getrat
 	res->rate = min_t(u64, r->rate_bytes_ps, ~0U);
 
 	res->overhead = r->overhead;
+	res->mpu = r->mpu;
 	res->linklayer = (r->linklayer & TC_LINKLAYER_MASK);
 }
 
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -1367,6 +1367,7 @@ void psched_ratecfg_precompute(struct ps
 {
 	memset(r, 0, sizeof(*r));
 	r->overhead = conf->overhead;
+	r->mpu = conf->mpu;
 	r->rate_bytes_ps = max_t(u64, conf->rate, rate64);
 	r->linklayer = (conf->linklayer & TC_LINKLAYER_MASK);
 	r->mult = 1;

[PATCH 4.19 233/239] bcmgenet: add WOL IRQ check

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream.

The driver neglects to check the result of platform_get_irq_optional()'s
call and blithely passes the negative error codes to devm_request_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL.
Stop calling devm_request_irq() with the invalid IRQ #s.

Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3516,10 +3516,12 @@ static int bcmgenet_probe(struct platfor
 
 	/* Request the WOL interrupt and advertise suspend if available */
 	priv->wol_irq_disabled = true;
-	err = devm_request_irq(&pdev->dev, priv->wol_irq, bcmgenet_wol_isr, 0,
-			       dev->name, priv);
-	if (!err)
-		device_set_wakeup_capable(&pdev->dev, 1);
+	if (priv->wol_irq > 0) {
+		err = devm_request_irq(&pdev->dev, priv->wol_irq,
+				       bcmgenet_wol_isr, 0, dev->name, priv);
+		if (!err)
+			device_set_wakeup_capable(&pdev->dev, 1);
+	}
 
 	/* Set the needed headroom to account for any possible
 	 * features enabling/disabling at runtime

[PATCH 4.19 234/239] scripts/dtc: dtx_diff: remove broken example from help text

[Greg Kroah-Hartman]

From: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>

commit d8adf5b92a9d2205620874d498c39923ecea8749 upstream.

dtx_diff suggests to use <(...) syntax to pipe two inputs into it, but
this has never worked: The /proc/self/fds/... paths passed by the shell
will fail the `[ -f "${dtx}" ] && [ -r "${dtx}" ]` check in compile_to_dts,
but even with this check removed, the function cannot work: hexdump will
eat up the DTB magic, making the subsequent dtc call fail, as a pipe
cannot be rewound.

Simply remove this broken example, as there is already an alternative one
that works fine.

Fixes: 10eadc253ddf ("dtc: create tool to diff device trees")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113081918.10387-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/dtc/dtx_diff |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/scripts/dtc/dtx_diff
+++ b/scripts/dtc/dtx_diff
@@ -56,12 +56,8 @@ Otherwise DTx is treated as a dts source
    or '/include/' to be processed.
 
    If DTx_1 and DTx_2 are in different architectures, then this script
-   may not work since \${ARCH} is part of the include path.  Two possible
-   workarounds:
-
-      `basename $0` \\
-          <(ARCH=arch_of_dtx_1 `basename $0` DTx_1) \\
-          <(ARCH=arch_of_dtx_2 `basename $0` DTx_2)
+   may not work since \${ARCH} is part of the include path.  The following
+   workaround can be used:
 
       `basename $0` ARCH=arch_of_dtx_1 DTx_1 >tmp_dtx_1.dts
       `basename $0` ARCH=arch_of_dtx_2 DTx_2 >tmp_dtx_2.dts

[PATCH 4.19 235/239] lib82596: Fix IRQ check in sni_82596_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

commit 99218cbf81bf21355a3de61cd46a706d36e900e6 upstream.

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: 115978859272 ("i825xx: Move the Intel 82586/82593/82596 based drivers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/i825xx/sni_82596.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/i825xx/sni_82596.c
+++ b/drivers/net/ethernet/i825xx/sni_82596.c
@@ -122,9 +122,10 @@ static int sni_82596_probe(struct platfo
 	netdevice->dev_addr[5] = readb(eth_addr + 0x06);
 	iounmap(eth_addr);
 
-	if (!netdevice->irq) {
+	if (netdevice->irq < 0) {
 		printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
 			__FILE__, netdevice->base_addr);
+		retval = netdevice->irq;
 		goto probe_failed;
 	}
 

[PATCH 4.19 236/239] mtd: nand: bbt: Fix corner case in bad block table handling

[Greg Kroah-Hartman]

From: Doyle, Patrick <pdoyle@irobot.com>

commit fd0d8d85f7230052e638a56d1bfea170c488e6bc upstream.

In the unlikely event that both blocks 10 and 11 are marked as bad (on a
32 bit machine), then the process of marking block 10 as bad stomps on
cached entry for block 11.  There are (of course) other examples.

Signed-off-by: Patrick Doyle <pdoyle@irobot.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Yoshio Furuyama <ytc-mb-yfuruyama7@kioxia.com>
[<miquel.raynal@bootlin.com>: Fixed the title]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/linux-mtd/774a92693f311e7de01e5935e720a179fb1b2468.1616635406.git.ytc-mb-yfuruyama7@kioxia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/nand/bbt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/bbt.c
+++ b/drivers/mtd/nand/bbt.c
@@ -123,7 +123,7 @@ int nanddev_bbt_set_block_status(struct
 		unsigned int rbits = bits_per_block + offs - BITS_PER_LONG;
 
 		pos[1] &= ~GENMASK(rbits - 1, 0);
-		pos[1] |= val >> rbits;
+		pos[1] |= val >> (bits_per_block - rbits);
 	}
 
 	return 0;

[PATCH 4.19 237/239] mips,s390,sh,sparc: gup: Work around the "COW can break either way" issue

[Greg Kroah-Hartman]

From: Ben Hutchings <ben@decadent.org.uk>

In Linux 4.14 and 4.19 these architectures still have their own
implementations of get_user_pages_fast().  These also need to force
the write flag on when taking the fast path.

Fixes: 407faed92b4a ("gup: document and work around "COW can break either way" issue")
Fixes: 5e24029791e8 ("gup: document and work around "COW can break either way" issue")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/mips/mm/gup.c  |    9 ++++++++-
 arch/s390/mm/gup.c  |    9 ++++++++-
 arch/sh/mm/gup.c    |    9 ++++++++-
 arch/sparc/mm/gup.c |    9 ++++++++-
 4 files changed, 32 insertions(+), 4 deletions(-)

--- a/arch/mips/mm/gup.c
+++ b/arch/mips/mm/gup.c
@@ -274,7 +274,14 @@ int get_user_pages_fast(unsigned long st
 		next = pgd_addr_end(addr, end);
 		if (pgd_none(pgd))
 			goto slow;
-		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+		/*
+		 * The FAST_GUP case requires FOLL_WRITE even for pure reads,
+		 * because get_user_pages() may need to cause an early COW in
+		 * order to avoid confusing the normal COW routines. So only
+		 * targets that are already writable are safe to do by just
+		 * looking at the page tables.
+		 */
+		if (!gup_pud_range(pgd, addr, next, 1, pages, &nr))
 			goto slow;
 	} while (pgdp++, addr = next, addr != end);
 	local_irq_enable();
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -287,7 +287,14 @@ int get_user_pages_fast(unsigned long st
 
 	might_sleep();
 	start &= PAGE_MASK;
-	nr = __get_user_pages_fast(start, nr_pages, write, pages);
+	/*
+	 * The FAST_GUP case requires FOLL_WRITE even for pure reads,
+	 * because get_user_pages() may need to cause an early COW in
+	 * order to avoid confusing the normal COW routines. So only
+	 * targets that are already writable are safe to do by just
+	 * looking at the page tables.
+	 */
+	nr = __get_user_pages_fast(start, nr_pages, 1, pages);
 	if (nr == nr_pages)
 		return nr;
 
--- a/arch/sh/mm/gup.c
+++ b/arch/sh/mm/gup.c
@@ -242,7 +242,14 @@ int get_user_pages_fast(unsigned long st
 		next = pgd_addr_end(addr, end);
 		if (pgd_none(pgd))
 			goto slow;
-		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+		/*
+		 * The FAST_GUP case requires FOLL_WRITE even for pure reads,
+		 * because get_user_pages() may need to cause an early COW in
+		 * order to avoid confusing the normal COW routines. So only
+		 * targets that are already writable are safe to do by just
+		 * looking at the page tables.
+		 */
+		if (!gup_pud_range(pgd, addr, next, 1, pages, &nr))
 			goto slow;
 	} while (pgdp++, addr = next, addr != end);
 	local_irq_enable();
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -303,7 +303,14 @@ int get_user_pages_fast(unsigned long st
 		next = pgd_addr_end(addr, end);
 		if (pgd_none(pgd))
 			goto slow;
-		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+		/*
+		 * The FAST_GUP case requires FOLL_WRITE even for pure reads,
+		 * because get_user_pages() may need to cause an early COW in
+		 * order to avoid confusing the normal COW routines. So only
+		 * targets that are already writable are safe to do by just
+		 * looking at the page tables.
+		 */
+		if (!gup_pud_range(pgd, addr, next, 1, pages, &nr))
 			goto slow;
 	} while (pgdp++, addr = next, addr != end);
 

[PATCH 4.19 238/239] fuse: fix bad inode

[Greg Kroah-Hartman]

From: Miklos Szeredi <mszeredi@redhat.com>

commit 5d069dbe8aaf2a197142558b6fb2978189ba3454 upstream.

Jan Kara's analysis of the syzbot report (edited):

  The reproducer opens a directory on FUSE filesystem, it then attaches
  dnotify mark to the open directory.  After that a fuse_do_getattr() call
  finds that attributes returned by the server are inconsistent, and calls
  make_bad_inode() which, among other things does:

          inode->i_mode = S_IFREG;

  This then confuses dnotify which doesn't tear down its structures
  properly and eventually crashes.

Avoid calling make_bad_inode() on a live inode: switch to a private flag on
the fuse inode.  Also add the test to ops which the bad_inode_ops would
have caught.

This bug goes back to the initial merge of fuse in 2.6.14...

Reported-by: syzbot+f427adf9324b92652ccc@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
[bwh: Backported to 4.19:
 - Drop changes in fuse_dir_fsync(), fuse_readahead(), fuse_evict_inode()
 - In fuse_get_link(), return ERR_PTR(-EIO) for bad inodes
 - Convert some additional calls to is_bad_inode()
 - Adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/fuse/acl.c    |    6 ++++++
 fs/fuse/dir.c    |   40 +++++++++++++++++++++++++++++++++++-----
 fs/fuse/file.c   |   27 ++++++++++++++++++---------
 fs/fuse/fuse_i.h |   12 ++++++++++++
 fs/fuse/inode.c  |    2 +-
 fs/fuse/xattr.c  |    9 +++++++++
 6 files changed, 81 insertions(+), 15 deletions(-)

--- a/fs/fuse/acl.c
+++ b/fs/fuse/acl.c
@@ -19,6 +19,9 @@ struct posix_acl *fuse_get_acl(struct in
 	void *value = NULL;
 	struct posix_acl *acl;
 
+	if (fuse_is_bad(inode))
+		return ERR_PTR(-EIO);
+
 	if (!fc->posix_acl || fc->no_getxattr)
 		return NULL;
 
@@ -53,6 +56,9 @@ int fuse_set_acl(struct inode *inode, st
 	const char *name;
 	int ret;
 
+	if (fuse_is_bad(inode))
+		return -EIO;
+
 	if (!fc->posix_acl || fc->no_setxattr)
 		return -EOPNOTSUPP;
 
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -187,7 +187,7 @@ static int fuse_dentry_revalidate(struct
 	int ret;
 
 	inode = d_inode_rcu(entry);
-	if (inode && is_bad_inode(inode))
+	if (inode && fuse_is_bad(inode))
 		goto invalid;
 	else if (time_before64(fuse_dentry_time(entry), get_jiffies_64()) ||
 		 (flags & LOOKUP_REVAL)) {
@@ -364,6 +364,9 @@ static struct dentry *fuse_lookup(struct
 	bool outarg_valid = true;
 	bool locked;
 
+	if (fuse_is_bad(dir))
+		return ERR_PTR(-EIO);
+
 	locked = fuse_lock_inode(dir);
 	err = fuse_lookup_name(dir->i_sb, get_node_id(dir), &entry->d_name,
 			       &outarg, &inode);
@@ -504,6 +507,9 @@ static int fuse_atomic_open(struct inode
 	struct fuse_conn *fc = get_fuse_conn(dir);
 	struct dentry *res = NULL;
 
+	if (fuse_is_bad(dir))
+		return -EIO;
+
 	if (d_in_lookup(entry)) {
 		res = fuse_lookup(dir, entry, 0);
 		if (IS_ERR(res))
@@ -552,6 +558,9 @@ static int create_new_entry(struct fuse_
 	int err;
 	struct fuse_forget_link *forget;
 
+	if (fuse_is_bad(dir))
+		return -EIO;
+
 	forget = fuse_alloc_forget();
 	if (!forget)
 		return -ENOMEM;
@@ -679,6 +688,9 @@ static int fuse_unlink(struct inode *dir
 	struct fuse_conn *fc = get_fuse_conn(dir);
 	FUSE_ARGS(args);
 
+	if (fuse_is_bad(dir))
+		return -EIO;
+
 	args.in.h.opcode = FUSE_UNLINK;
 	args.in.h.nodeid = get_node_id(dir);
 	args.in.numargs = 1;
@@ -715,6 +727,9 @@ static int fuse_rmdir(struct inode *dir,
 	struct fuse_conn *fc = get_fuse_conn(dir);
 	FUSE_ARGS(args);
 
+	if (fuse_is_bad(dir))
+		return -EIO;
+
 	args.in.h.opcode = FUSE_RMDIR;
 	args.in.h.nodeid = get_node_id(dir);
 	args.in.numargs = 1;
@@ -793,6 +808,9 @@ static int fuse_rename2(struct inode *ol
 	struct fuse_conn *fc = get_fuse_conn(olddir);
 	int err;
 
+	if (fuse_is_bad(olddir))
+		return -EIO;
+
 	if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE))
 		return -EINVAL;
 
@@ -928,7 +946,7 @@ static int fuse_do_getattr(struct inode
 	if (!err) {
 		if (fuse_invalid_attr(&outarg.attr) ||
 		    (inode->i_mode ^ outarg.attr.mode) & S_IFMT) {
-			make_bad_inode(inode);
+			fuse_make_bad(inode);
 			err = -EIO;
 		} else {
 			fuse_change_attributes(inode, &outarg.attr,
@@ -1125,6 +1143,9 @@ static int fuse_permission(struct inode
 	bool refreshed = false;
 	int err = 0;
 
+	if (fuse_is_bad(inode))
+		return -EIO;
+
 	if (!fuse_allow_current_process(fc))
 		return -EACCES;
 
@@ -1262,7 +1283,7 @@ retry:
 			dput(dentry);
 			goto retry;
 		}
-		if (is_bad_inode(inode)) {
+		if (fuse_is_bad(inode)) {
 			dput(dentry);
 			return -EIO;
 		}
@@ -1360,7 +1381,7 @@ static int fuse_readdir(struct file *fil
 	u64 attr_version = 0;
 	bool locked;
 
-	if (is_bad_inode(inode))
+	if (fuse_is_bad(inode))
 		return -EIO;
 
 	req = fuse_get_req(fc, 1);
@@ -1420,6 +1441,9 @@ static const char *fuse_get_link(struct
 	if (!dentry)
 		return ERR_PTR(-ECHILD);
 
+	if (fuse_is_bad(inode))
+		return ERR_PTR(-EIO);
+
 	link = kmalloc(PAGE_SIZE, GFP_KERNEL);
 	if (!link)
 		return ERR_PTR(-ENOMEM);
@@ -1718,7 +1742,7 @@ int fuse_do_setattr(struct dentry *dentr
 
 	if (fuse_invalid_attr(&outarg.attr) ||
 	    (inode->i_mode ^ outarg.attr.mode) & S_IFMT) {
-		make_bad_inode(inode);
+		fuse_make_bad(inode);
 		err = -EIO;
 		goto error;
 	}
@@ -1774,6 +1798,9 @@ static int fuse_setattr(struct dentry *e
 	struct file *file = (attr->ia_valid & ATTR_FILE) ? attr->ia_file : NULL;
 	int ret;
 
+	if (fuse_is_bad(inode))
+		return -EIO;
+
 	if (!fuse_allow_current_process(get_fuse_conn(inode)))
 		return -EACCES;
 
@@ -1832,6 +1859,9 @@ static int fuse_getattr(const struct pat
 	struct inode *inode = d_inode(path->dentry);
 	struct fuse_conn *fc = get_fuse_conn(inode);
 
+	if (fuse_is_bad(inode))
+		return -EIO;
+
 	if (!fuse_allow_current_process(fc))
 		return -EACCES;
 
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -210,6 +210,9 @@ int fuse_open_common(struct inode *inode
 			  fc->atomic_o_trunc &&
 			  fc->writeback_cache;
 
+	if (fuse_is_bad(inode))
+		return -EIO;
+
 	err = generic_file_open(inode, file);
 	if (err)
 		return err;
@@ -411,7 +414,7 @@ static int fuse_flush(struct file *file,
 	struct fuse_flush_in inarg;
 	int err;
 
-	if (is_bad_inode(inode))
+	if (fuse_is_bad(inode))
 		return -EIO;
 
 	if (fc->no_flush)
@@ -459,7 +462,7 @@ int fuse_fsync_common(struct file *file,
 	struct fuse_fsync_in inarg;
 	int err;
 
-	if (is_bad_inode(inode))
+	if (fuse_is_bad(inode))
 		return -EIO;
 
 	inode_lock(inode);
@@ -774,7 +777,7 @@ static int fuse_readpage(struct file *fi
 	int err;
 
 	err = -EIO;
-	if (is_bad_inode(inode))
+	if (fuse_is_bad(inode))
 		goto out;
 
 	err = fuse_do_readpage(file, page);
@@ -901,7 +904,7 @@ static int fuse_readpages(struct file *f
 	int nr_alloc = min_t(unsigned, nr_pages, FUSE_MAX_PAGES_PER_REQ);
 
 	err = -EIO;
-	if (is_bad_inode(inode))
+	if (fuse_is_bad(inode))
 		goto out;
 
 	data.file = file;
@@ -931,6 +934,9 @@ static ssize_t fuse_file_read_iter(struc
 	struct inode *inode = iocb->ki_filp->f_mapping->host;
 	struct fuse_conn *fc = get_fuse_conn(inode);
 
+	if (fuse_is_bad(inode))
+		return -EIO;
+
 	/*
 	 * In auto invalidate mode, always update attributes on read.
 	 * Otherwise, only update if we attempt to read past EOF (to ensure
@@ -1131,7 +1137,7 @@ static ssize_t fuse_perform_write(struct
 	int err = 0;
 	ssize_t res = 0;
 
-	if (is_bad_inode(inode))
+	if (fuse_is_bad(inode))
 		return -EIO;
 
 	if (inode->i_size < pos + iov_iter_count(ii))
@@ -1188,6 +1194,9 @@ static ssize_t fuse_file_write_iter(stru
 	ssize_t err;
 	loff_t endbyte = 0;
 
+	if (fuse_is_bad(inode))
+		return -EIO;
+
 	if (get_fuse_conn(inode)->writeback_cache) {
 		/* Update size (EOF optimization) and mode (SUID clearing) */
 		err = fuse_update_attributes(mapping->host, file);
@@ -1424,7 +1433,7 @@ static ssize_t __fuse_direct_read(struct
 	ssize_t res;
 	struct inode *inode = file_inode(io->iocb->ki_filp);
 
-	if (is_bad_inode(inode))
+	if (fuse_is_bad(inode))
 		return -EIO;
 
 	res = fuse_direct_io(io, iter, ppos, 0);
@@ -1446,7 +1455,7 @@ static ssize_t fuse_direct_write_iter(st
 	struct fuse_io_priv io = FUSE_IO_PRIV_SYNC(iocb);
 	ssize_t res;
 
-	if (is_bad_inode(inode))
+	if (fuse_is_bad(inode))
 		return -EIO;
 
 	/* Don't allow parallel writes to the same file */
@@ -1920,7 +1929,7 @@ static int fuse_writepages(struct addres
 	int err;
 
 	err = -EIO;
-	if (is_bad_inode(inode))
+	if (fuse_is_bad(inode))
 		goto out;
 
 	data.inode = inode;
@@ -2705,7 +2714,7 @@ long fuse_ioctl_common(struct file *file
 	if (!fuse_allow_current_process(fc))
 		return -EACCES;
 
-	if (is_bad_inode(inode))
+	if (fuse_is_bad(inode))
 		return -EIO;
 
 	return fuse_do_ioctl(file, cmd, arg, flags);
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -118,6 +118,8 @@ enum {
 	FUSE_I_INIT_RDPLUS,
 	/** An operation changing file size is in progress  */
 	FUSE_I_SIZE_UNSTABLE,
+	/* Bad inode */
+	FUSE_I_BAD,
 };
 
 struct fuse_conn;
@@ -700,6 +702,16 @@ static inline u64 get_node_id(struct ino
 	return get_fuse_inode(inode)->nodeid;
 }
 
+static inline void fuse_make_bad(struct inode *inode)
+{
+	set_bit(FUSE_I_BAD, &get_fuse_inode(inode)->state);
+}
+
+static inline bool fuse_is_bad(struct inode *inode)
+{
+	return unlikely(test_bit(FUSE_I_BAD, &get_fuse_inode(inode)->state));
+}
+
 /** Device operations */
 extern const struct file_operations fuse_dev_operations;
 
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -317,7 +317,7 @@ struct inode *fuse_iget(struct super_blo
 		unlock_new_inode(inode);
 	} else if ((inode->i_mode ^ attr->mode) & S_IFMT) {
 		/* Inode has changed type, any I/O on the old should fail */
-		make_bad_inode(inode);
+		fuse_make_bad(inode);
 		iput(inode);
 		goto retry;
 	}
--- a/fs/fuse/xattr.c
+++ b/fs/fuse/xattr.c
@@ -113,6 +113,9 @@ ssize_t fuse_listxattr(struct dentry *en
 	struct fuse_getxattr_out outarg;
 	ssize_t ret;
 
+	if (fuse_is_bad(inode))
+		return -EIO;
+
 	if (!fuse_allow_current_process(fc))
 		return -EACCES;
 
@@ -178,6 +181,9 @@ static int fuse_xattr_get(const struct x
 			 struct dentry *dentry, struct inode *inode,
 			 const char *name, void *value, size_t size)
 {
+	if (fuse_is_bad(inode))
+		return -EIO;
+
 	return fuse_getxattr(inode, name, value, size);
 }
 
@@ -186,6 +192,9 @@ static int fuse_xattr_set(const struct x
 			  const char *name, const void *value, size_t size,
 			  int flags)
 {
+	if (fuse_is_bad(inode))
+		return -EIO;
+
 	if (!value)
 		return fuse_removexattr(inode, name);
 

[PATCH 4.19 239/239] fuse: fix live lock in fuse_iget()

[Greg Kroah-Hartman]

From: Amir Goldstein <amir73il@gmail.com>

commit 775c5033a0d164622d9d10dd0f0a5531639ed3ed upstream.

Commit 5d069dbe8aaf ("fuse: fix bad inode") replaced make_bad_inode()
in fuse_iget() with a private implementation fuse_make_bad().

The private implementation fails to remove the bad inode from inode
cache, so the retry loop with iget5_locked() finds the same bad inode
and marks it bad forever.

kmsg snip:

[ ] rcu: INFO: rcu_sched self-detected stall on CPU
...
[ ]  ? bit_wait_io+0x50/0x50
[ ]  ? fuse_init_file_inode+0x70/0x70
[ ]  ? find_inode.isra.32+0x60/0xb0
[ ]  ? fuse_init_file_inode+0x70/0x70
[ ]  ilookup5_nowait+0x65/0x90
[ ]  ? fuse_init_file_inode+0x70/0x70
[ ]  ilookup5.part.36+0x2e/0x80
[ ]  ? fuse_init_file_inode+0x70/0x70
[ ]  ? fuse_inode_eq+0x20/0x20
[ ]  iget5_locked+0x21/0x80
[ ]  ? fuse_inode_eq+0x20/0x20
[ ]  fuse_iget+0x96/0x1b0

Fixes: 5d069dbe8aaf ("fuse: fix bad inode")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/fuse/fuse_i.h |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -704,6 +704,7 @@ static inline u64 get_node_id(struct ino
 
 static inline void fuse_make_bad(struct inode *inode)
 {
+	remove_inode_hash(inode);
 	set_bit(FUSE_I_BAD, &get_fuse_inode(inode)->state);
 }
 

Re: [PATCH 4.19 000/239] 4.19.226-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 664 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.226 release.
> There are 239 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 026/239] f2fs: fix to do sanity check in is_alive()

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1695 bytes --]

Hi!

> From: Chao Yu <chao@kernel.org>
> 
> commit 77900c45ee5cd5da63bd4d818a41dbdf367e81cd upstream.
> 
> In fuzzed image, SSA table may indicate that a data block belongs to
> invalid node, which node ID is out-of-range (0, 1, 2 or max_nid), in
> order to avoid migrating inconsistent data in such corrupted image,
> let's do sanity check anyway before data block migration.

This may be good idea, but AFAICT this leads to leak of page reference.

> +++ b/fs/f2fs/gc.c
> @@ -589,6 +589,9 @@ static bool is_alive(struct f2fs_sb_info
>  		set_sbi_flag(sbi, SBI_NEED_FSCK);
>  	}
>  
> +	if (f2fs_check_nid_range(sbi, dni->ino))
> +		return false;
> +
>  	*nofs = ofs_of_node(node_page);
>  	source_blkaddr = datablock_addr(NULL, node_page, ofs_in_node);
>  	f2fs_put_page(node_page, 1);

AFAICT f2fs_put_page() needs to be done in the error path, too.

(Problem seems to exist in mainline, too).

Something like this?

Signed-off-by: Pavel Machek <pavel@denx.de>

Best regards,
								Pavel

diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index ee308a8de432..e020804f7b07 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1038,8 +1038,10 @@ static bool is_alive(struct f2fs_sb_info *sbi, struct f2fs_summary *sum,
 		set_sbi_flag(sbi, SBI_NEED_FSCK);
 	}
 
-	if (f2fs_check_nid_range(sbi, dni->ino))
+	if (f2fs_check_nid_range(sbi, dni->ino)) {
+		f2fs_put_page(node_page, 1);
 		return false;
+	}
 
 	*nofs = ofs_of_node(node_page);
 	source_blkaddr = data_blkaddr(NULL, node_page, ofs_in_node);


-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 000/239] 4.19.226-rc1 review

[Shuah Khan]

On 1/24/22 11:40 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.226 release.
> There are 239 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.226-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 026/239] f2fs: fix to do sanity check in is_alive()

[Chao Yu]

On 2022/1/25 4:36, Pavel Machek wrote:
> Hi!
> 
>> From: Chao Yu <chao@kernel.org>
>>
>> commit 77900c45ee5cd5da63bd4d818a41dbdf367e81cd upstream.
>>
>> In fuzzed image, SSA table may indicate that a data block belongs to
>> invalid node, which node ID is out-of-range (0, 1, 2 or max_nid), in
>> order to avoid migrating inconsistent data in such corrupted image,
>> let's do sanity check anyway before data block migration.
> 
> This may be good idea, but AFAICT this leads to leak of page reference.

Hi Pavel,

Oops, you're right, my bad.

> 
>> +++ b/fs/f2fs/gc.c
>> @@ -589,6 +589,9 @@ static bool is_alive(struct f2fs_sb_info
>>   		set_sbi_flag(sbi, SBI_NEED_FSCK);
>>   	}
>>   
>> +	if (f2fs_check_nid_range(sbi, dni->ino))
>> +		return false;
>> +
>>   	*nofs = ofs_of_node(node_page);
>>   	source_blkaddr = datablock_addr(NULL, node_page, ofs_in_node);
>>   	f2fs_put_page(node_page, 1);
> 
> AFAICT f2fs_put_page() needs to be done in the error path, too.
> 
> (Problem seems to exist in mainline, too).
> 
> Something like this?

Could you please send a formal patch to f2fs mailing list for better review?

Anyway, thanks a lot for the report and the patch!

Thanks,

> 
> Signed-off-by: Pavel Machek <pavel@denx.de>
> 
> Best regards,
> 								Pavel
> 
> diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
> index ee308a8de432..e020804f7b07 100644
> --- a/fs/f2fs/gc.c
> +++ b/fs/f2fs/gc.c
> @@ -1038,8 +1038,10 @@ static bool is_alive(struct f2fs_sb_info *sbi, struct f2fs_summary *sum,
>   		set_sbi_flag(sbi, SBI_NEED_FSCK);
>   	}
>   
> -	if (f2fs_check_nid_range(sbi, dni->ino))
> +	if (f2fs_check_nid_range(sbi, dni->ino)) {
> +		f2fs_put_page(node_page, 1);
>   		return false;
> +	}
>   
>   	*nofs = ofs_of_node(node_page);
>   	source_blkaddr = data_blkaddr(NULL, node_page, ofs_in_node);
> 
> 

Re: [PATCH 4.19 000/239] 4.19.226-rc1 review

[Naresh Kamboju]

On Tue, 25 Jan 2022 at 00:44, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.226 release.
> There are 239 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.226-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.19.226-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.19.y
* git commit: ebabcfeda281e1c6226b219845d71930c729dae0
* git describe: v4.19.225-240-gebabcfeda281
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.225-240-gebabcfeda281

## Test Regressions (compared to v4.19.225-213-gad801d4f7db5)
No test regressions found.

## Metric Regressions (compared to v4.19.225-213-gad801d4f7db5)
No metric regressions found.

## Test Fixes (compared to v4.19.225-213-gad801d4f7db5)
No test fixes found.

## Metric Fixes (compared to v4.19.225-213-gad801d4f7db5)
No metric fixes found.

## Test result summary
total: 85753, pass: 69950, fail: 717, skip: 13259, xfail: 1827

## Build Summary
* arm: 250 total, 246 passed, 4 failed
* arm64: 35 total, 35 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 26 total, 26 passed, 0 failed
* powerpc: 52 total, 48 passed, 4 failed
* s390: 12 total, 12 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 34 total, 34 passed, 0 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 000/239] 4.19.226-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Jan 24, 2022 at 07:40:38PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.226 release.
> There are 239 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20220121): 63 configs -> no failure
arm (gcc version 11.2.1 20220121): 116 configs -> no new failure
arm64 (gcc version 11.2.1 20220121): 2 configs -> no failure
x86_64 (gcc version 11.2.1 20220121): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/651


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 4.19 127/239] ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 839 bytes --]

Hi!

> [ Upstream commit b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784 ]
> 
> Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
> DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
> 
> So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
> Kconfig and rename the definitions to IMX27 as further clean-up.
> 
> This issue was discovered with ./scripts/checkkconfigsymbols.py, which
> reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
> SOC_IMX21.

This is unsuitable for 4.19, as CONFIG_SOC_IMX21 is still present
there. It is probably okay for 5.10. I did not check others.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 147/239] HID: quirks: Allow inverting the absolute X/Y values

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 446 bytes --]

Hi!

> [ Upstream commit fd8d135b2c5e88662f2729e034913f183455a667 ]
> 
> Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
> to invert the X/Y values.

AFAICT this simply adds unused code to at least 4.19 and 5.10 stable
releases.

Best regards,
								Pavel
								
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 000/239] 4.19.226-rc1 review

[Jon Hunter]

On Mon, 24 Jan 2022 19:40:38 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.226 release.
> There are 239 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.226-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.19:
    10 builds:	10 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version:	4.19.226-rc1-gcedebae149c2
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.19 000/239] 4.19.226-rc1 review

[Samuel Zou]

On 2022/1/25 2:40, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.226 release.
> There are 239 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.226-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 4.19.226-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.226-rc1
Commit: ebabcfeda281e1c6226b219845d71930c729dae0
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8941
passed: 8941
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8941
passed: 8941
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 4.19 127/239] ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART

[Greg Kroah-Hartman]

On Tue, Jan 25, 2022 at 08:15:46PM +0100, Pavel Machek wrote:
> Hi!
> 
> > [ Upstream commit b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784 ]
> > 
> > Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
> > DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
> > 
> > So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
> > Kconfig and rename the definitions to IMX27 as further clean-up.
> > 
> > This issue was discovered with ./scripts/checkkconfigsymbols.py, which
> > reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
> > SOC_IMX21.
> 
> This is unsuitable for 4.19, as CONFIG_SOC_IMX21 is still present
> there. It is probably okay for 5.10. I did not check others.

Good point, I will drop this from 5.4 and older now.

thanks,

greg k-h

Re: [PATCH 4.19 000/239] 4.19.226-rc1 review

[Guenter Roeck]

On Mon, Jan 24, 2022 at 07:40:38PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.226 release.
> There are 239 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 425 pass: 425 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 026/239] f2fs: fix to do sanity check in is_alive()

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1069 bytes --]

Hi!

> Oops, you're right, my bad.
> 
> > 
> > > +++ b/fs/f2fs/gc.c
> > > @@ -589,6 +589,9 @@ static bool is_alive(struct f2fs_sb_info
> > >   		set_sbi_flag(sbi, SBI_NEED_FSCK);
> > >   	}
> > > +	if (f2fs_check_nid_range(sbi, dni->ino))
> > > +		return false;
> > > +
> > >   	*nofs = ofs_of_node(node_page);
> > >   	source_blkaddr = datablock_addr(NULL, node_page, ofs_in_node);
> > >   	f2fs_put_page(node_page, 1);
> > 
> > AFAICT f2fs_put_page() needs to be done in the error path, too.
> > 
> > (Problem seems to exist in mainline, too).
> > 
> > Something like this?
> 
> Could you please send a formal patch to f2fs mailing list for better review?
> 
> Anyway, thanks a lot for the report and the patch!

I'm quite busy with other reviews at the moment. If you could submit a
patch, it would be great, otherwise I'll get to it .. sometime.

Best regards,
									Pavel
									
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 026/239] f2fs: fix to do sanity check in is_alive()

[Chao Yu]

On 2022/2/2 3:18, Pavel Machek wrote:
> Hi!
> 
>> Oops, you're right, my bad.
>>
>>>
>>>> +++ b/fs/f2fs/gc.c
>>>> @@ -589,6 +589,9 @@ static bool is_alive(struct f2fs_sb_info
>>>>    		set_sbi_flag(sbi, SBI_NEED_FSCK);
>>>>    	}
>>>> +	if (f2fs_check_nid_range(sbi, dni->ino))
>>>> +		return false;
>>>> +
>>>>    	*nofs = ofs_of_node(node_page);
>>>>    	source_blkaddr = datablock_addr(NULL, node_page, ofs_in_node);
>>>>    	f2fs_put_page(node_page, 1);
>>>
>>> AFAICT f2fs_put_page() needs to be done in the error path, too.
>>>
>>> (Problem seems to exist in mainline, too).
>>>
>>> Something like this?
>>
>> Could you please send a formal patch to f2fs mailing list for better review?
>>
>> Anyway, thanks a lot for the report and the patch!
> 
> I'm quite busy with other reviews at the moment. If you could submit a
> patch, it would be great, otherwise I'll get to it .. sometime.

I've submitted a patch, could you please take a look?

Thanks,

> 
> Best regards,
> 									Pavel
>