stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manish Chopra <manishc@marvell.com>
To: <kuba@kernel.org>
Cc: <pmenzel@molgen.mpg.de>, <netdev@vger.kernel.org>,
	<aelior@marvell.com>, <regressions@lists.linux.dev>,
	<stable@vger.kernel.org>
Subject: [PATCH net] bnx2x: fix built-in kernel driver load failure
Date: Wed, 16 Mar 2022 14:46:13 -0700	[thread overview]
Message-ID: <20220316214613.6884-1-manishc@marvell.com> (raw)

commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
added request_firmware() logic in probe() which caused
built-in kernel driver (CONFIG_BNX2X=y) load failure (below),
as access to firmware file is not feasible during the probe.

"Direct firmware load for bnx2x/bnx2x-e2-7.13.21.0.fw
failed with error -2"

This patch fixes this issue by -

1. Removing request_firmware() logic from the probe()
   such that .ndo_open() handle it as it used to handle
   it earlier

2. Given request_firmware() is removed from probe(), so
   driver has to relax FW version comparisons a bit against
   the already loaded FW version (by some other PFs of same
   adapter) to allow different compatible/close FWs with which
   multiple PFs may run with (in different environments), as the
   given PF who is in probe flow has no idea now with which firmware
   file version it is going to initialize the device in ndo_open()

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/46f2d9d9-ae7f-b332-ddeb-b59802be2bab@molgen.mpg.de/
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h   |  2 --
 .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c   | 28 +++++++++++--------
 .../net/ethernet/broadcom/bnx2x/bnx2x_main.c  | 15 ++--------
 3 files changed, 19 insertions(+), 26 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index a19dd6797070..2209d99b3404 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2533,6 +2533,4 @@ void bnx2x_register_phc(struct bnx2x *bp);
  * Meant for implicit re-load flows.
  */
 int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp);
-int bnx2x_init_firmware(struct bnx2x *bp);
-void bnx2x_release_firmware(struct bnx2x *bp);
 #endif /* bnx2x.h */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 8d36ebbf08e1..5729a5ab059d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2364,24 +2364,30 @@ int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err)
 	/* is another pf loaded on this engine? */
 	if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP &&
 	    load_code != FW_MSG_CODE_DRV_LOAD_COMMON) {
-		/* build my FW version dword */
-		u32 my_fw = (bp->fw_major) + (bp->fw_minor << 8) +
-				(bp->fw_rev << 16) + (bp->fw_eng << 24);
+		u8 loaded_fw_major, loaded_fw_minor, loaded_fw_rev, loaded_fw_eng;
+		u32 loaded_fw;
 
 		/* read loaded FW from chip */
-		u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
+		loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
 
-		DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x\n",
-		   loaded_fw, my_fw);
+		loaded_fw_major = loaded_fw & 0xff;
+		loaded_fw_minor = (loaded_fw >> 8) & 0xff;
+		loaded_fw_rev = (loaded_fw >> 16) & 0xff;
+		loaded_fw_eng = (loaded_fw >> 24) & 0xff;
+
+		DP(BNX2X_MSG_SP, "loaded fw 0x%x major 0x%x minor 0x%x rev 0x%x eng 0x%x\n",
+		   loaded_fw, loaded_fw_major, loaded_fw_minor, loaded_fw_rev, loaded_fw_eng);
 
 		/* abort nic load if version mismatch */
-		if (my_fw != loaded_fw) {
+		if (loaded_fw_major != BCM_5710_FW_MAJOR_VERSION ||
+		    loaded_fw_minor != BCM_5710_FW_MINOR_VERSION ||
+		    loaded_fw_eng != BCM_5710_FW_ENGINEERING_VERSION ||
+		    loaded_fw_rev < BCM_5710_FW_REVISION_VERSION_V15) {
 			if (print_err)
-				BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. Aborting\n",
-					  loaded_fw, my_fw);
+				BNX2X_ERR("loaded FW incompatible. Aborting\n");
 			else
-				BNX2X_DEV_INFO("bnx2x with FW %x was already loaded which mismatches my %x FW, possibly due to MF UNDI\n",
-					       loaded_fw, my_fw);
+				BNX2X_DEV_INFO("loaded FW incompatible, possibly due to MF UNDI\n");
+
 			return -EBUSY;
 		}
 	}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index eedb48d945ed..c19b072f3a23 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12319,15 +12319,6 @@ static int bnx2x_init_bp(struct bnx2x *bp)
 
 	bnx2x_read_fwinfo(bp);
 
-	if (IS_PF(bp)) {
-		rc = bnx2x_init_firmware(bp);
-
-		if (rc) {
-			bnx2x_free_mem_bp(bp);
-			return rc;
-		}
-	}
-
 	func = BP_FUNC(bp);
 
 	/* need to reset chip if undi was active */
@@ -12340,7 +12331,6 @@ static int bnx2x_init_bp(struct bnx2x *bp)
 
 		rc = bnx2x_prev_unload(bp);
 		if (rc) {
-			bnx2x_release_firmware(bp);
 			bnx2x_free_mem_bp(bp);
 			return rc;
 		}
@@ -13409,7 +13399,7 @@ do {									\
 	     (u8 *)bp->arr, len);					\
 } while (0)
 
-int bnx2x_init_firmware(struct bnx2x *bp)
+static int bnx2x_init_firmware(struct bnx2x *bp)
 {
 	const char *fw_file_name, *fw_file_name_v15;
 	struct bnx2x_fw_file_hdr *fw_hdr;
@@ -13509,7 +13499,7 @@ int bnx2x_init_firmware(struct bnx2x *bp)
 	return rc;
 }
 
-void bnx2x_release_firmware(struct bnx2x *bp)
+static void bnx2x_release_firmware(struct bnx2x *bp)
 {
 	kfree(bp->init_ops_offsets);
 	kfree(bp->init_ops);
@@ -14026,7 +14016,6 @@ static int bnx2x_init_one(struct pci_dev *pdev,
 	return 0;
 
 init_one_freemem:
-	bnx2x_release_firmware(bp);
 	bnx2x_free_mem_bp(bp);
 
 init_one_exit:
-- 
2.35.1.273.ge6ebfd0


             reply	other threads:[~2022-03-16 21:47 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-16 21:46 Manish Chopra [this message]
2022-03-17  7:32 ` [PATCH net] bnx2x: fix built-in kernel driver load failure Paul Menzel
2022-03-17  9:55   ` [EXT] " Manish Chopra
2022-03-17 13:31     ` Paul Menzel
2022-03-17 15:33       ` Jakub Kicinski
2022-03-17 16:28         ` Paul Menzel
2022-03-17 16:40 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220316214613.6884-1-manishc@marvell.com \
    --to=manishc@marvell.com \
    --cc=aelior@marvell.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pmenzel@molgen.mpg.de \
    --cc=regressions@lists.linux.dev \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).