[PATCH 5.16 00/37] 5.16.18-rc1 review

[PATCH 5.16 00/37] 5.16.18-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.16.18 release.
There are 37 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 27 Mar 2022 15:04:08 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.18-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.16.18-rc1

Arnd Bergmann <arnd@arndb.de>
    nds32: fix access_ok() checks in get/put_user

Arnd Bergmann <arnd@arndb.de>
    m68k: fix access_ok for coldfire

Bryan O'Donoghue <bryan.odonoghue@linaro.org>
    wcn36xx: Differentiate wcn3660 from wcn3620

James Bottomley <James.Bottomley@HansenPartnership.com>
    tpm: use try_get_ops() in tpm-space.c

Linus Lüssing <ll@simonwunderlich.de>
    mac80211: fix potential double free on mesh join

Arnd Bergmann <arnd@arndb.de>
    uaccess: fix integer overflow on access_ok()

Paul E. McKenney <paulmck@kernel.org>
    rcu: Don't deboost before reporting expedited quiescent state

Roberto Sassu <roberto.sassu@huawei.com>
    drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free()

Brian Norris <briannorris@chromium.org>
    Revert "ath: add support for special 0x0 regulatory domain"

Larry Finger <Larry.Finger@lwfinger.net>
    Bluetooth: btusb: Add one more Bluetooth part for the Realtek RTL8852AE

Giovanni Cabiddu <giovanni.cabiddu@intel.com>
    crypto: qat - disable registration of algorithms

Werner Sembach <wse@tuxedocomputers.com>
    ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU

Maximilian Luz <luzmaximilian@gmail.com>
    ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3

Mark Cilissen <mark@yotsuba.nl>
    ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: validate registers coming from userspace.

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: initialize registers in nft_do_chain()

Stephane Graber <stgraber@ubuntu.com>
    drivers: net: xgene: Fix regression in CRC stripping

Giacomo Guiduzzi <guiduzzi.giacomo@gmail.com>
    ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec

Jonathan Teh <jonathan.teh@outlook.com>
    ALSA: cmipci: Restore aux vol on suspend/resume

Lars-Peter Clausen <lars@metafoo.de>
    ALSA: usb-audio: Add mute TLV for playback volumes on RODE NT-USB

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: Add stream lock during PCM reset ioctl operations

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: Fix races among concurrent prealloc proc writes

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls

Tadeusz Struk <tstruk@gmail.com>
    tpm: Fix error handling in async work

Tadeusz Struk <tadeusz.struk@linaro.org>
    net: ipv6: fix skb_over_panic in __ip6_append_data

Jordy Zomer <jordy@pwning.systems>
    nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: Fix races among concurrent read/write and buffer changes

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: Fix races among concurrent hw_params and hw_free calls

Jason Zheng <jasonzheng2004@gmail.com>
    ALSA: hda/realtek: Add quirk for ASUS GA402

huangwenhui <huangwenhuia@uniontech.com>
    ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671

Tim Crawford <tcrawford@system76.com>
    ALSA: hda/realtek: Add quirk for Clevo NP50PNJ

Tim Crawford <tcrawford@system76.com>
    ALSA: hda/realtek: Add quirk for Clevo NP70PNJ

Reza Jahanbakhshi <reza.jahanbakhshi@gmail.com>
    ALSA: usb-audio: add mapping for new Corsair Virtuoso SE

Takashi Iwai <tiwai@suse.de>
    ALSA: oss: Fix PCM OSS buffer allocation overflow

Takashi Iwai <tiwai@suse.de>
    ASoC: sti: Fix deadlock via snd_pcm_stop_xrun() call

Eric Dumazet <edumazet@google.com>
    llc: fix netdevice reference leaks in llc_ui_bind()

Helmut Grohne <helmut@subdivi.de>
    Bluetooth: btusb: Add another Realtek 8761BU


-------------

Diffstat:

 Makefile                                         |  4 +-
 arch/csky/include/asm/uaccess.h                  |  7 +-
 arch/hexagon/include/asm/uaccess.h               | 18 ++---
 arch/m68k/include/asm/uaccess.h                  | 15 ++--
 arch/microblaze/include/asm/uaccess.h            | 19 +----
 arch/nds32/include/asm/uaccess.h                 | 22 ++++--
 arch/x86/kernel/acpi/boot.c                      | 24 ++++++
 drivers/acpi/battery.c                           | 12 +++
 drivers/acpi/video_detect.c                      | 75 ++++++++++++++++++
 drivers/bluetooth/btusb.c                        |  4 +
 drivers/char/tpm/tpm-dev-common.c                |  8 +-
 drivers/char/tpm/tpm2-space.c                    |  8 +-
 drivers/crypto/qat/qat_4xxx/adf_drv.c            |  7 ++
 drivers/crypto/qat/qat_common/qat_crypto.c       |  7 ++
 drivers/gpu/drm/virtio/virtgpu_gem.c             |  3 +
 drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 12 +--
 drivers/net/wireless/ath/regd.c                  | 10 +--
 drivers/net/wireless/ath/wcn36xx/main.c          |  3 +
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h       |  1 +
 drivers/nfc/st21nfca/se.c                        | 10 +++
 include/sound/pcm.h                              |  1 +
 kernel/rcu/tree_plugin.h                         |  8 +-
 net/ipv6/ip6_output.c                            |  4 +-
 net/llc/af_llc.c                                 |  8 ++
 net/mac80211/cfg.c                               |  3 -
 net/netfilter/nf_tables_api.c                    | 22 ++++--
 net/netfilter/nf_tables_core.c                   |  2 +-
 sound/core/oss/pcm_oss.c                         | 12 ++-
 sound/core/oss/pcm_plugin.c                      |  5 +-
 sound/core/pcm.c                                 |  2 +
 sound/core/pcm_lib.c                             |  4 +
 sound/core/pcm_memory.c                          | 11 ++-
 sound/core/pcm_native.c                          | 97 +++++++++++++++---------
 sound/pci/ac97/ac97_codec.c                      |  4 +-
 sound/pci/cmipci.c                               |  3 +-
 sound/pci/hda/patch_realtek.c                    |  4 +
 sound/soc/sti/uniperif_player.c                  |  6 +-
 sound/soc/sti/uniperif_reader.c                  |  2 +-
 sound/usb/mixer_maps.c                           | 10 +++
 sound/usb/mixer_quirks.c                         |  7 +-
 40 files changed, 357 insertions(+), 127 deletions(-)

[PATCH 5.16 01/37] Bluetooth: btusb: Add another Realtek 8761BU

[Greg Kroah-Hartman]

From: Helmut Grohne <helmut@subdivi.de>

commit 6dfbe29f45fb0bde29213dbd754a79e8bfc6ecef upstream.

This device is sometimes wrapped with a label "EDUP".

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=107 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2550 ProdID=8761 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00E04C239987
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Helmut Grohne <helmut@subdivi.de>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955351
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btusb.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -481,6 +481,8 @@ static const struct usb_device_id blackl
 	/* Additional Realtek 8761BU Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
 	  					     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x2550, 0x8761), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Additional Realtek 8821AE Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },

[PATCH 5.16 02/37] llc: fix netdevice reference leaks in llc_ui_bind()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 764f4eb6846f5475f1244767d24d25dd86528a4a upstream.

Whenever llc_ui_bind() and/or llc_ui_autobind()
took a reference on a netdevice but subsequently fail,
they must properly release their reference
or risk the infamous message from unregister_netdevice()
at device dismantle.

unregister_netdevice: waiting for eth0 to become free. Usage count = 3

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: 赵子轩 <beraphin@gmail.com>
Reported-by: Stoyan Manolov <smanolov@suse.de>
Link: https://lore.kernel.org/r/20220323004147.1990845-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/llc/af_llc.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -310,6 +310,10 @@ static int llc_ui_autobind(struct socket
 	sock_reset_flag(sk, SOCK_ZAPPED);
 	rc = 0;
 out:
+	if (rc) {
+		dev_put(llc->dev);
+		llc->dev = NULL;
+	}
 	return rc;
 }
 
@@ -407,6 +411,10 @@ static int llc_ui_bind(struct socket *so
 out_put:
 	llc_sap_put(sap);
 out:
+	if (rc) {
+		dev_put(llc->dev);
+		llc->dev = NULL;
+	}
 	release_sock(sk);
 	return rc;
 }

[PATCH 5.16 03/37] ASoC: sti: Fix deadlock via snd_pcm_stop_xrun() call

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 455c5653f50e10b4f460ef24e99f0044fbe3401c upstream.

This is essentially a revert of the commit dc865fb9e7c2 ("ASoC: sti:
Use snd_pcm_stop_xrun() helper"), which converted the manual
snd_pcm_stop() calls with snd_pcm_stop_xrun().

The commit above introduced a deadlock as snd_pcm_stop_xrun() itself
takes the PCM stream lock while the caller already holds it.  Since
the conversion was done only for consistency reason and the open-call
with snd_pcm_stop() to the XRUN state is a correct usage, let's revert
the commit back as the fix.

Fixes: dc865fb9e7c2 ("ASoC: sti: Use snd_pcm_stop_xrun() helper")
Reported-by: Daniel Palmer <daniel@0x0f.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220315091319.3351522-1-daniel@0x0f.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220315164158.19804-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/sti/uniperif_player.c |    6 +++---
 sound/soc/sti/uniperif_reader.c |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/sound/soc/sti/uniperif_player.c
+++ b/sound/soc/sti/uniperif_player.c
@@ -91,7 +91,7 @@ static irqreturn_t uni_player_irq_handle
 			SET_UNIPERIF_ITM_BCLR_FIFO_ERROR(player);
 
 			/* Stop the player */
-			snd_pcm_stop_xrun(player->substream);
+			snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN);
 		}
 
 		ret = IRQ_HANDLED;
@@ -105,7 +105,7 @@ static irqreturn_t uni_player_irq_handle
 		SET_UNIPERIF_ITM_BCLR_DMA_ERROR(player);
 
 		/* Stop the player */
-		snd_pcm_stop_xrun(player->substream);
+		snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN);
 
 		ret = IRQ_HANDLED;
 	}
@@ -138,7 +138,7 @@ static irqreturn_t uni_player_irq_handle
 		dev_err(player->dev, "Underflow recovery failed\n");
 
 		/* Stop the player */
-		snd_pcm_stop_xrun(player->substream);
+		snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN);
 
 		ret = IRQ_HANDLED;
 	}
--- a/sound/soc/sti/uniperif_reader.c
+++ b/sound/soc/sti/uniperif_reader.c
@@ -65,7 +65,7 @@ static irqreturn_t uni_reader_irq_handle
 	if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) {
 		dev_err(reader->dev, "FIFO error detected\n");
 
-		snd_pcm_stop_xrun(reader->substream);
+		snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN);
 
 		ret = IRQ_HANDLED;
 	}

[PATCH 5.16 04/37] ALSA: oss: Fix PCM OSS buffer allocation overflow

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit efb6402c3c4a7c26d97c92d70186424097b6e366 upstream.

We've got syzbot reports hitting INT_MAX overflow at vmalloc()
allocation that is called from snd_pcm_plug_alloc().  Although we
apply the restrictions to input parameters, it's based only on the
hw_params of the underlying PCM device.  Since the PCM OSS layer
allocates a temporary buffer for the data conversion, the size may
become unexpectedly large when more channels or higher rates is given;
in the reported case, it went over INT_MAX, hence it hits WARN_ON().

This patch is an attempt to avoid such an overflow and an allocation
for too large buffers.  First off, it adds the limit of 1MB as the
upper bound for period bytes.  This must be large enough for all use
cases, and we really don't want to handle a larger temporary buffer
than this size.  The size check is performed at two places, where the
original period bytes is calculated and where the plugin buffer size
is calculated.

In addition, the driver uses array_size() and array3_size() for
multiplications to catch overflows for the converted period size and
buffer bytes.

Reported-by: syzbot+72732c532ac1454eeee9@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/00000000000085b1b305da5a66f3@google.com
Link: https://lore.kernel.org/r/20220318082036.29699-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/oss/pcm_oss.c    |   12 ++++++++----
 sound/core/oss/pcm_plugin.c |    5 ++++-
 2 files changed, 12 insertions(+), 5 deletions(-)

--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -774,6 +774,11 @@ static int snd_pcm_oss_period_size(struc
 
 	if (oss_period_size < 16)
 		return -EINVAL;
+
+	/* don't allocate too large period; 1MB period must be enough */
+	if (oss_period_size > 1024 * 1024)
+		return -ENOMEM;
+
 	runtime->oss.period_bytes = oss_period_size;
 	runtime->oss.period_frames = 1;
 	runtime->oss.periods = oss_periods;
@@ -1043,10 +1048,9 @@ static int snd_pcm_oss_change_params_loc
 			goto failure;
 	}
 #endif
-	oss_period_size *= oss_frame_size;
-
-	oss_buffer_size = oss_period_size * runtime->oss.periods;
-	if (oss_buffer_size < 0) {
+	oss_period_size = array_size(oss_period_size, oss_frame_size);
+	oss_buffer_size = array_size(oss_period_size, runtime->oss.periods);
+	if (oss_buffer_size <= 0) {
 		err = -EINVAL;
 		goto failure;
 	}
--- a/sound/core/oss/pcm_plugin.c
+++ b/sound/core/oss/pcm_plugin.c
@@ -62,7 +62,10 @@ static int snd_pcm_plugin_alloc(struct s
 	width = snd_pcm_format_physical_width(format->format);
 	if (width < 0)
 		return width;
-	size = frames * format->channels * width;
+	size = array3_size(frames, format->channels, width);
+	/* check for too large period size once again */
+	if (size > 1024 * 1024)
+		return -ENOMEM;
 	if (snd_BUG_ON(size % 8))
 		return -ENXIO;
 	size /= 8;

[PATCH 5.16 05/37] ALSA: usb-audio: add mapping for new Corsair Virtuoso SE

[Greg Kroah-Hartman]

From: Reza Jahanbakhshi <reza.jahanbakhshi@gmail.com>

commit cd94df1795418056a19ff4cb44eadfc18ac99a57 upstream.

New device id for Corsair Virtuoso SE RGB Wireless that currently is not
in the mixer_map. This entry in the mixer_map is necessary in order to
label its mixer appropriately and allow userspace to pick the correct
volume controls. For instance, my own Corsair Virtuoso SE RGB Wireless
headset has this new ID and consequently, the sidetone and volume are not
 working correctly without this change.
> sudo lsusb -v | grep -i corsair
Bus 007 Device 011: ID 1b1c:0a40 Corsair CORSAIR VIRTUOSO SE Wireless Gam
  idVendor           0x1b1c Corsair
  iManufacturer           1 Corsair
  iProduct                2 CORSAIR VIRTUOSO SE Wireless Gaming Headset

Signed-off-by: Reza Jahanbakhshi <reza.jahanbakhshi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220304212303.195949-1-reza.jahanbakhshi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/mixer_maps.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -537,6 +537,16 @@ static const struct usbmix_ctl_map usbmi
 		.map = corsair_virtuoso_map,
 	},
 	{
+		/* Corsair Virtuoso SE Latest (wired mode) */
+		.id = USB_ID(0x1b1c, 0x0a3f),
+		.map = corsair_virtuoso_map,
+	},
+	{
+		/* Corsair Virtuoso SE Latest (wireless mode) */
+		.id = USB_ID(0x1b1c, 0x0a40),
+		.map = corsair_virtuoso_map,
+	},
+	{
 		/* Corsair Virtuoso (wireless mode) */
 		.id = USB_ID(0x1b1c, 0x0a42),
 		.map = corsair_virtuoso_map,

[PATCH 5.16 06/37] ALSA: hda/realtek: Add quirk for Clevo NP70PNJ

[Greg Kroah-Hartman]

From: Tim Crawford <tcrawford@system76.com>

commit 0c20fce13e6e111463e3a15ce3cf6713fe518388 upstream.

Fixes headset detection on Clevo NP70PNJ.

Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220304170840.3351-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8949,6 +8949,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x8561, "Clevo NH[57][0-9][ER][ACDH]Q", ALC269_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1558, 0x8562, "Clevo NH[57][0-9]RZ[Q]", ALC269_FIXUP_DMIC),
 	SND_PCI_QUIRK(0x1558, 0x8668, "Clevo NP50B[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x867d, "Clevo NP7[01]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8680, "Clevo NJ50LU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8686, "Clevo NH50[CZ]U", ALC256_FIXUP_MIC_NO_PRESENCE_AND_RESUME),
 	SND_PCI_QUIRK(0x1558, 0x8a20, "Clevo NH55DCQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),

[PATCH 5.16 07/37] ALSA: hda/realtek: Add quirk for Clevo NP50PNJ

[Greg Kroah-Hartman]

From: Tim Crawford <tcrawford@system76.com>

commit 9cb727506704b5323998047789fc871e64a6aa14 upstream.

Fixes headset detection on Clevo NP50PNJ.

Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220307193229.5141-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8949,6 +8949,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x8561, "Clevo NH[57][0-9][ER][ACDH]Q", ALC269_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1558, 0x8562, "Clevo NH[57][0-9]RZ[Q]", ALC269_FIXUP_DMIC),
 	SND_PCI_QUIRK(0x1558, 0x8668, "Clevo NP50B[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x866d, "Clevo NP5[05]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x867d, "Clevo NP7[01]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8680, "Clevo NJ50LU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8686, "Clevo NH50[CZ]U", ALC256_FIXUP_MIC_NO_PRESENCE_AND_RESUME),

[PATCH 5.16 08/37] ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671

[Greg Kroah-Hartman]

From: huangwenhui <huangwenhuia@uniontech.com>

commit 882bd07f564f97fca6e42ce6ce627ce24ce1ef5a upstream.

On a HP 288 Pro G8, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.

Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311093836.20754-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10911,6 +10911,7 @@ static const struct snd_pci_quirk alc662
 	SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
 	SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2),
+	SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2),
 	SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE),
 	SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_ASUS_Nx50),
 	SND_PCI_QUIRK(0x1043, 0x129d, "Asus N750", ALC662_FIXUP_ASUS_Nx50),

[PATCH 5.16 09/37] ALSA: hda/realtek: Add quirk for ASUS GA402

[Greg Kroah-Hartman]

From: Jason Zheng <jasonzheng2004@gmail.com>

commit b7557267c233b55d8e8d7ba4c68cf944fe2ec02c upstream.

ASUS GA402 requires a workaround to manage the routing of its 4 speakers
like the other ASUS models. Add a corresponding quirk entry to fix it.

Signed-off-by: Jason Zheng <jasonzheng2004@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220313092216.29858-1-jasonzheng2004@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8866,6 +8866,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401),
+	SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),
 	SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC),

[PATCH 5.16 10/37] ALSA: pcm: Fix races among concurrent hw_params and hw_free calls

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 92ee3c60ec9fe64404dc035e7c41277d74aa26cb upstream.

Currently we have neither proper check nor protection against the
concurrent calls of PCM hw_params and hw_free ioctls, which may result
in a UAF.  Since the existing PCM stream lock can't be used for
protecting the whole ioctl operations, we need a new mutex to protect
those racy calls.

This patch introduced a new mutex, runtime->buffer_mutex, and applies
it to both hw_params and hw_free ioctl code paths.  Along with it, the
both functions are slightly modified (the mmap_count check is moved
into the state-check block) for code simplicity.

Reported-by: Hu Jiahui <kirin.say@gmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/sound/pcm.h     |    1 
 sound/core/pcm.c        |    2 +
 sound/core/pcm_native.c |   61 ++++++++++++++++++++++++++++++------------------
 3 files changed, 42 insertions(+), 22 deletions(-)

--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -398,6 +398,7 @@ struct snd_pcm_runtime {
 	wait_queue_head_t tsleep;	/* transfer sleep */
 	struct fasync_struct *fasync;
 	bool stop_operating;		/* sync_stop will be called */
+	struct mutex buffer_mutex;	/* protect for buffer changes */
 
 	/* -- private section -- */
 	void *private_data;
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -969,6 +969,7 @@ int snd_pcm_attach_substream(struct snd_
 	init_waitqueue_head(&runtime->tsleep);
 
 	runtime->status->state = SNDRV_PCM_STATE_OPEN;
+	mutex_init(&runtime->buffer_mutex);
 
 	substream->runtime = runtime;
 	substream->private_data = pcm->private_data;
@@ -1002,6 +1003,7 @@ void snd_pcm_detach_substream(struct snd
 	} else {
 		substream->runtime = NULL;
 	}
+	mutex_destroy(&runtime->buffer_mutex);
 	kfree(runtime);
 	put_pid(substream->pid);
 	substream->pid = NULL;
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -672,33 +672,40 @@ static int snd_pcm_hw_params_choose(stru
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_SND_PCM_OSS)
+#define is_oss_stream(substream)	((substream)->oss.oss)
+#else
+#define is_oss_stream(substream)	false
+#endif
+
 static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params)
 {
 	struct snd_pcm_runtime *runtime;
-	int err, usecs;
+	int err = 0, usecs;
 	unsigned int bits;
 	snd_pcm_uframes_t frames;
 
 	if (PCM_RUNTIME_CHECK(substream))
 		return -ENXIO;
 	runtime = substream->runtime;
+	mutex_lock(&runtime->buffer_mutex);
 	snd_pcm_stream_lock_irq(substream);
 	switch (runtime->status->state) {
 	case SNDRV_PCM_STATE_OPEN:
 	case SNDRV_PCM_STATE_SETUP:
 	case SNDRV_PCM_STATE_PREPARED:
+		if (!is_oss_stream(substream) &&
+		    atomic_read(&substream->mmap_count))
+			err = -EBADFD;
 		break;
 	default:
-		snd_pcm_stream_unlock_irq(substream);
-		return -EBADFD;
+		err = -EBADFD;
+		break;
 	}
 	snd_pcm_stream_unlock_irq(substream);
-#if IS_ENABLED(CONFIG_SND_PCM_OSS)
-	if (!substream->oss.oss)
-#endif
-		if (atomic_read(&substream->mmap_count))
-			return -EBADFD;
+	if (err)
+		goto unlock;
 
 	snd_pcm_sync_stop(substream, true);
 
@@ -786,16 +793,21 @@ static int snd_pcm_hw_params(struct snd_
 	if (usecs >= 0)
 		cpu_latency_qos_add_request(&substream->latency_pm_qos_req,
 					    usecs);
-	return 0;
+	err = 0;
  _error:
-	/* hardware might be unusable from this time,
-	   so we force application to retry to set
-	   the correct hardware parameter settings */
-	snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
-	if (substream->ops->hw_free != NULL)
-		substream->ops->hw_free(substream);
-	if (substream->managed_buffer_alloc)
-		snd_pcm_lib_free_pages(substream);
+	if (err) {
+		/* hardware might be unusable from this time,
+		 * so we force application to retry to set
+		 * the correct hardware parameter settings
+		 */
+		snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
+		if (substream->ops->hw_free != NULL)
+			substream->ops->hw_free(substream);
+		if (substream->managed_buffer_alloc)
+			snd_pcm_lib_free_pages(substream);
+	}
+ unlock:
+	mutex_unlock(&runtime->buffer_mutex);
 	return err;
 }
 
@@ -835,26 +847,31 @@ static int do_hw_free(struct snd_pcm_sub
 static int snd_pcm_hw_free(struct snd_pcm_substream *substream)
 {
 	struct snd_pcm_runtime *runtime;
-	int result;
+	int result = 0;
 
 	if (PCM_RUNTIME_CHECK(substream))
 		return -ENXIO;
 	runtime = substream->runtime;
+	mutex_lock(&runtime->buffer_mutex);
 	snd_pcm_stream_lock_irq(substream);
 	switch (runtime->status->state) {
 	case SNDRV_PCM_STATE_SETUP:
 	case SNDRV_PCM_STATE_PREPARED:
+		if (atomic_read(&substream->mmap_count))
+			result = -EBADFD;
 		break;
 	default:
-		snd_pcm_stream_unlock_irq(substream);
-		return -EBADFD;
+		result = -EBADFD;
+		break;
 	}
 	snd_pcm_stream_unlock_irq(substream);
-	if (atomic_read(&substream->mmap_count))
-		return -EBADFD;
+	if (result)
+		goto unlock;
 	result = do_hw_free(substream);
 	snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
 	cpu_latency_qos_remove_request(&substream->latency_pm_qos_req);
+ unlock:
+	mutex_unlock(&runtime->buffer_mutex);
 	return result;
 }
 

[PATCH 5.16 11/37] ALSA: pcm: Fix races among concurrent read/write and buffer changes

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit dca947d4d26dbf925a64a6cfb2ddbc035e831a3d upstream.

In the current PCM design, the read/write syscalls (as well as the
equivalent ioctls) are allowed before the PCM stream is running, that
is, at PCM PREPARED state.  Meanwhile, we also allow to re-issue
hw_params and hw_free ioctl calls at the PREPARED state that may
change or free the buffers, too.  The problem is that there is no
protection against those mix-ups.

This patch applies the previously introduced runtime->buffer_mutex to
the read/write operations so that the concurrent hw_params or hw_free
call can no longer interfere during the operation.  The mutex is
unlocked before scheduling, so we don't take it too long.

Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/pcm_lib.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1906,9 +1906,11 @@ static int wait_for_avail(struct snd_pcm
 		if (avail >= runtime->twake)
 			break;
 		snd_pcm_stream_unlock_irq(substream);
+		mutex_unlock(&runtime->buffer_mutex);
 
 		tout = schedule_timeout(wait_time);
 
+		mutex_lock(&runtime->buffer_mutex);
 		snd_pcm_stream_lock_irq(substream);
 		set_current_state(TASK_INTERRUPTIBLE);
 		switch (runtime->status->state) {
@@ -2202,6 +2204,7 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
 
 	nonblock = !!(substream->f_flags & O_NONBLOCK);
 
+	mutex_lock(&runtime->buffer_mutex);
 	snd_pcm_stream_lock_irq(substream);
 	err = pcm_accessible_state(runtime);
 	if (err < 0)
@@ -2293,6 +2296,7 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
 	if (xfer > 0 && err >= 0)
 		snd_pcm_update_state(substream, runtime);
 	snd_pcm_stream_unlock_irq(substream);
+	mutex_unlock(&runtime->buffer_mutex);
 	return xfer > 0 ? (snd_pcm_sframes_t)xfer : err;
 }
 EXPORT_SYMBOL(__snd_pcm_lib_xfer);

[PATCH 5.16 12/37] nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION

[Greg Kroah-Hartman]

From: Jordy Zomer <jordy@pwning.systems>

commit 4fbcc1a4cb20fe26ad0225679c536c80f1648221 upstream.

It appears that there are some buffer overflows in EVT_TRANSACTION.
This happens because the length parameters that are passed to memcpy
come directly from skb->data and are not guarded in any way.

Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Denis Efremov <denis.e.efremov@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nfc/st21nfca/se.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/nfc/st21nfca/se.c
+++ b/drivers/nfc/st21nfca/se.c
@@ -316,6 +316,11 @@ int st21nfca_connectivity_event_received
 			return -ENOMEM;
 
 		transaction->aid_len = skb->data[1];
+
+		/* Checking if the length of the AID is valid */
+		if (transaction->aid_len > sizeof(transaction->aid))
+			return -EINVAL;
+
 		memcpy(transaction->aid, &skb->data[2],
 		       transaction->aid_len);
 
@@ -325,6 +330,11 @@ int st21nfca_connectivity_event_received
 			return -EPROTO;
 
 		transaction->params_len = skb->data[transaction->aid_len + 3];
+
+		/* Total size is allocated (skb->len - 2) minus fixed array members */
+		if (transaction->params_len > ((skb->len - 2) - sizeof(struct nfc_evt_transaction)))
+			return -EINVAL;
+
 		memcpy(transaction->params, skb->data +
 		       transaction->aid_len + 4, transaction->params_len);
 

[PATCH 5.16 13/37] net: ipv6: fix skb_over_panic in __ip6_append_data

[Greg Kroah-Hartman]

From: Tadeusz Struk <tadeusz.struk@linaro.org>

commit 5e34af4142ffe68f01c8a9acae83300f8911e20c upstream.

Syzbot found a kernel bug in the ipv6 stack:
LINK: https://syzkaller.appspot.com/bug?id=205d6f11d72329ab8d62a610c44c5e7e25415580
The reproducer triggers it by sending a crafted message via sendmmsg()
call, which triggers skb_over_panic, and crashes the kernel:

skbuff: skb_over_panic: text:ffffffff84647fb4 len:65575 put:65575
head:ffff888109ff0000 data:ffff888109ff0088 tail:0x100af end:0xfec0
dev:<NULL>

Update the check that prevents an invalid packet with MTU equal
to the fregment header size to eat up all the space for payload.

The reproducer can be found here:
LINK: https://syzkaller.appspot.com/text?tag=ReproC&x=1648c83fb00000

Reported-by: syzbot+e223cf47ec8ae183f2a0@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220310232538.1044947-1-tadeusz.struk@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_output.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1476,8 +1476,8 @@ static int __ip6_append_data(struct sock
 		      sizeof(struct frag_hdr) : 0) +
 		     rt->rt6i_nfheader_len;
 
-	if (mtu < fragheaderlen ||
-	    ((mtu - fragheaderlen) & ~7) + fragheaderlen < sizeof(struct frag_hdr))
+	if (mtu <= fragheaderlen ||
+	    ((mtu - fragheaderlen) & ~7) + fragheaderlen <= sizeof(struct frag_hdr))
 		goto emsgsize;
 
 	maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen -

[PATCH 5.16 14/37] tpm: Fix error handling in async work

[Greg Kroah-Hartman]

From: Tadeusz Struk <tstruk@gmail.com>

commit 2e8e4c8f6673247e22efc7985ce5497accd16f88 upstream.

When an invalid (non existing) handle is used in a TPM command,
that uses the resource manager interface (/dev/tpmrm0) the resource
manager tries to load it from its internal cache, but fails and
the tpm_dev_transmit returns an -EINVAL error to the caller.
The existing async handler doesn't handle these error cases
currently and the condition in the poll handler never returns
mask with EPOLLIN set.
The result is that the poll call blocks and the application gets stuck
until the user_read_timer wakes it up after 120 sec.
Change the tpm_dev_async_work function to handle error conditions
returned from tpm_dev_transmit they are also reflected in the poll mask
and a correct error code could passed back to the caller.

Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <linux-integrity@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>

Fixes: 9e1b74a63f77 ("tpm: add support for nonblocking operation")
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/tpm/tpm-dev-common.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/char/tpm/tpm-dev-common.c
+++ b/drivers/char/tpm/tpm-dev-common.c
@@ -69,7 +69,13 @@ static void tpm_dev_async_work(struct wo
 	ret = tpm_dev_transmit(priv->chip, priv->space, priv->data_buffer,
 			       sizeof(priv->data_buffer));
 	tpm_put_ops(priv->chip);
-	if (ret > 0) {
+
+	/*
+	 * If ret is > 0 then tpm_dev_transmit returned the size of the
+	 * response. If ret is < 0 then tpm_dev_transmit failed and
+	 * returned an error code.
+	 */
+	if (ret != 0) {
 		priv->response_length = ret;
 		mod_timer(&priv->user_read_timer, jiffies + (120 * HZ));
 	}

[PATCH 5.16 15/37] ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 3c3201f8c7bb77eb53b08a3ca8d9a4ddc500b4c0 upstream.

Like the previous fixes to hw_params and hw_free ioctl races, we need
to paper over the concurrent prepare ioctl calls against hw_params and
hw_free, too.

This patch implements the locking with the existing
runtime->buffer_mutex for prepare ioctls.  Unlike the previous case
for snd_pcm_hw_hw_params() and snd_pcm_hw_free(), snd_pcm_prepare() is
performed to the linked streams, hence the lock can't be applied
simply on the top.  For tracking the lock in each linked substream, we
modify snd_pcm_action_group() slightly and apply the buffer_mutex for
the case stream_lock=false (formerly there was no lock applied)
there.

Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/pcm_native.c |   32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1177,15 +1177,17 @@ struct action_ops {
 static int snd_pcm_action_group(const struct action_ops *ops,
 				struct snd_pcm_substream *substream,
 				snd_pcm_state_t state,
-				bool do_lock)
+				bool stream_lock)
 {
 	struct snd_pcm_substream *s = NULL;
 	struct snd_pcm_substream *s1;
 	int res = 0, depth = 1;
 
 	snd_pcm_group_for_each_entry(s, substream) {
-		if (do_lock && s != substream) {
-			if (s->pcm->nonatomic)
+		if (s != substream) {
+			if (!stream_lock)
+				mutex_lock_nested(&s->runtime->buffer_mutex, depth);
+			else if (s->pcm->nonatomic)
 				mutex_lock_nested(&s->self_group.mutex, depth);
 			else
 				spin_lock_nested(&s->self_group.lock, depth);
@@ -1213,18 +1215,18 @@ static int snd_pcm_action_group(const st
 		ops->post_action(s, state);
 	}
  _unlock:
-	if (do_lock) {
-		/* unlock streams */
-		snd_pcm_group_for_each_entry(s1, substream) {
-			if (s1 != substream) {
-				if (s1->pcm->nonatomic)
-					mutex_unlock(&s1->self_group.mutex);
-				else
-					spin_unlock(&s1->self_group.lock);
-			}
-			if (s1 == s)	/* end */
-				break;
+	/* unlock streams */
+	snd_pcm_group_for_each_entry(s1, substream) {
+		if (s1 != substream) {
+			if (!stream_lock)
+				mutex_unlock(&s1->runtime->buffer_mutex);
+			else if (s1->pcm->nonatomic)
+				mutex_unlock(&s1->self_group.mutex);
+			else
+				spin_unlock(&s1->self_group.lock);
 		}
+		if (s1 == s)	/* end */
+			break;
 	}
 	return res;
 }
@@ -1354,10 +1356,12 @@ static int snd_pcm_action_nonatomic(cons
 
 	/* Guarantee the group members won't change during non-atomic action */
 	down_read(&snd_pcm_link_rwsem);
+	mutex_lock(&substream->runtime->buffer_mutex);
 	if (snd_pcm_stream_linked(substream))
 		res = snd_pcm_action_group(ops, substream, state, false);
 	else
 		res = snd_pcm_action_single(ops, substream, state);
+	mutex_unlock(&substream->runtime->buffer_mutex);
 	up_read(&snd_pcm_link_rwsem);
 	return res;
 }

[PATCH 5.16 16/37] ALSA: pcm: Fix races among concurrent prealloc proc writes

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 69534c48ba8ce552ce383b3dfdb271ffe51820c3 upstream.

We have no protection against concurrent PCM buffer preallocation
changes via proc files, and it may potentially lead to UAF or some
weird problem.  This patch applies the PCM open_mutex to the proc
write operation for avoiding the racy proc writes and the PCM stream
open (and further operations).

Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/pcm_memory.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/sound/core/pcm_memory.c
+++ b/sound/core/pcm_memory.c
@@ -163,19 +163,20 @@ static void snd_pcm_lib_preallocate_proc
 	size_t size;
 	struct snd_dma_buffer new_dmab;
 
+	mutex_lock(&substream->pcm->open_mutex);
 	if (substream->runtime) {
 		buffer->error = -EBUSY;
-		return;
+		goto unlock;
 	}
 	if (!snd_info_get_line(buffer, line, sizeof(line))) {
 		snd_info_get_str(str, line, sizeof(str));
 		size = simple_strtoul(str, NULL, 10) * 1024;
 		if ((size != 0 && size < 8192) || size > substream->dma_max) {
 			buffer->error = -EINVAL;
-			return;
+			goto unlock;
 		}
 		if (substream->dma_buffer.bytes == size)
-			return;
+			goto unlock;
 		memset(&new_dmab, 0, sizeof(new_dmab));
 		new_dmab.dev = substream->dma_buffer.dev;
 		if (size > 0) {
@@ -189,7 +190,7 @@ static void snd_pcm_lib_preallocate_proc
 					 substream->pcm->card->number, substream->pcm->device,
 					 substream->stream ? 'c' : 'p', substream->number,
 					 substream->pcm->name, size);
-				return;
+				goto unlock;
 			}
 			substream->buffer_bytes_max = size;
 		} else {
@@ -201,6 +202,8 @@ static void snd_pcm_lib_preallocate_proc
 	} else {
 		buffer->error = -EINVAL;
 	}
+ unlock:
+	mutex_unlock(&substream->pcm->open_mutex);
 }
 
 static inline void preallocate_info_init(struct snd_pcm_substream *substream)

[PATCH 5.16 17/37] ALSA: pcm: Add stream lock during PCM reset ioctl operations

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 1f68915b2efd0d6bfd6e124aa63c94b3c69f127c upstream.

snd_pcm_reset() is a non-atomic operation, and it's allowed to run
during the PCM stream running.  It implies that the manipulation of
hw_ptr and other parameters might be racy.

This patch adds the PCM stream lock at appropriate places in
snd_pcm_*_reset() actions for covering that.

Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322171325.4355-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/pcm_native.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1851,11 +1851,13 @@ static int snd_pcm_do_reset(struct snd_p
 	int err = snd_pcm_ops_ioctl(substream, SNDRV_PCM_IOCTL1_RESET, NULL);
 	if (err < 0)
 		return err;
+	snd_pcm_stream_lock_irq(substream);
 	runtime->hw_ptr_base = 0;
 	runtime->hw_ptr_interrupt = runtime->status->hw_ptr -
 		runtime->status->hw_ptr % runtime->period_size;
 	runtime->silence_start = runtime->status->hw_ptr;
 	runtime->silence_filled = 0;
+	snd_pcm_stream_unlock_irq(substream);
 	return 0;
 }
 
@@ -1863,10 +1865,12 @@ static void snd_pcm_post_reset(struct sn
 			       snd_pcm_state_t state)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
+	snd_pcm_stream_lock_irq(substream);
 	runtime->control->appl_ptr = runtime->status->hw_ptr;
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
 	    runtime->silence_size > 0)
 		snd_pcm_playback_silence(substream, ULONG_MAX);
+	snd_pcm_stream_unlock_irq(substream);
 }
 
 static const struct action_ops snd_pcm_action_reset = {

[PATCH 5.16 18/37] ALSA: usb-audio: Add mute TLV for playback volumes on RODE NT-USB

[Greg Kroah-Hartman]

From: Lars-Peter Clausen <lars@metafoo.de>

commit 0f306cca42fe879694fb5e2382748c43dc9e0196 upstream.

For the RODE NT-USB the lowest Playback mixer volume setting mutes the
audio output. But it is not reported as such causing e.g. PulseAudio to
accidentally mute the device when selecting a low volume.

Fix this by applying the existing quirk for this kind of issue when the
device is detected.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311201400.235892-1-lars@metafoo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/mixer_quirks.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -3362,9 +3362,10 @@ void snd_usb_mixer_fu_apply_quirk(struct
 		if (unitid == 7 && cval->control == UAC_FU_VOLUME)
 			snd_dragonfly_quirk_db_scale(mixer, cval, kctl);
 		break;
-	/* lowest playback value is muted on C-Media devices */
-	case USB_ID(0x0d8c, 0x000c):
-	case USB_ID(0x0d8c, 0x0014):
+	/* lowest playback value is muted on some devices */
+	case USB_ID(0x0d8c, 0x000c): /* C-Media */
+	case USB_ID(0x0d8c, 0x0014): /* C-Media */
+	case USB_ID(0x19f7, 0x0003): /* RODE NT-USB */
 		if (strstr(kctl->id.name, "Playback"))
 			cval->min_mute = 1;
 		break;

[PATCH 5.16 19/37] ALSA: cmipci: Restore aux vol on suspend/resume

[Greg Kroah-Hartman]

From: Jonathan Teh <jonathan.teh@outlook.com>

commit c14231cc04337c2c2a937db084af342ce704dbde upstream.

Save and restore CM_REG_AUX_VOL instead of register 0x24 twice on
suspend/resume.

Tested on CMI8738LX.

Fixes: cb60e5f5b2b1 ("[ALSA] cmipci - Add PM support")
Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/DBAPR04MB7366CB3EA9C8521C35C56E8B920E9@DBAPR04MB7366.eurprd04.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/cmipci.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -298,7 +298,6 @@ MODULE_PARM_DESC(joystick_port, "Joystic
 #define CM_MICGAINZ		0x01	/* mic boost */
 #define CM_MICGAINZ_SHIFT	0
 
-#define CM_REG_MIXER3		0x24
 #define CM_REG_AUX_VOL		0x26
 #define CM_VAUXL_MASK		0xf0
 #define CM_VAUXR_MASK		0x0f
@@ -3265,7 +3264,7 @@ static int snd_cmipci_probe(struct pci_d
  */
 static const unsigned char saved_regs[] = {
 	CM_REG_FUNCTRL1, CM_REG_CHFORMAT, CM_REG_LEGACY_CTRL, CM_REG_MISC_CTRL,
-	CM_REG_MIXER0, CM_REG_MIXER1, CM_REG_MIXER2, CM_REG_MIXER3, CM_REG_PLL,
+	CM_REG_MIXER0, CM_REG_MIXER1, CM_REG_MIXER2, CM_REG_AUX_VOL, CM_REG_PLL,
 	CM_REG_CH0_FRAME1, CM_REG_CH0_FRAME2,
 	CM_REG_CH1_FRAME1, CM_REG_CH1_FRAME2, CM_REG_EXT_MISC,
 	CM_REG_INT_STATUS, CM_REG_INT_HLDCLR, CM_REG_FUNCTRL0,

[PATCH 5.16 20/37] ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec

[Greg Kroah-Hartman]

From: Giacomo Guiduzzi <guiduzzi.giacomo@gmail.com>

commit 17aaf0193392cb3451bf0ac75ba396ec4cbded6e upstream.

Tests 72 and 78 for ALSA in kselftest fail due to reading
inconsistent values from some devices on a VirtualBox
Virtual Machine using the snd_intel8x0 driver for the AC'97
Audio Controller device.
Taking for example test number 72, this is what the test reports:
"Surround Playback Volume.0 expected 1 but read 0, is_volatile 0"
"Surround Playback Volume.1 expected 0 but read 1, is_volatile 0"
These errors repeat for each value from 0 to 31.

Taking a look at these error messages it is possible to notice
that the written values are read back swapped.
When the write is performed, these values are initially stored in
an array used to sanity-check them and write them in the pcmreg
array. To write them, the two one-byte values are packed together
in a two-byte variable through bitwise operations: the first
value is shifted left by one byte and the second value is stored in the
right byte through a bitwise OR. When reading the values back,
right shifts are performed to retrieve the previously stored
bytes. These shifts are executed in the wrong order, thus
reporting the values swapped as shown above.

This patch fixes this mistake by reversing the read
operations' order.

Signed-off-by: Giacomo Guiduzzi <guiduzzi.giacomo@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220322200653.15862-1-guiduzzi.giacomo@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/ac97/ac97_codec.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -938,8 +938,8 @@ static int snd_ac97_ad18xx_pcm_get_volum
 	int codec = kcontrol->private_value & 3;
 	
 	mutex_lock(&ac97->page_mutex);
-	ucontrol->value.integer.value[0] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 0) & 31);
-	ucontrol->value.integer.value[1] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 8) & 31);
+	ucontrol->value.integer.value[0] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 8) & 31);
+	ucontrol->value.integer.value[1] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 0) & 31);
 	mutex_unlock(&ac97->page_mutex);
 	return 0;
 }

[PATCH 5.16 21/37] drivers: net: xgene: Fix regression in CRC stripping

[Greg Kroah-Hartman]

From: Stephane Graber <stgraber@ubuntu.com>

commit e9e6faeafaa00da1851bcf47912b0f1acae666b4 upstream.

All packets on ingress (except for jumbo) are terminated with a 4-bytes
CRC checksum. It's the responsability of the driver to strip those 4
bytes. Unfortunately a change dating back to March 2017 re-shuffled some
code and made the CRC stripping code effectively dead.

This change re-orders that part a bit such that the datalen is
immediately altered if needed.

Fixes: 4902a92270fb ("drivers: net: xgene: Add workaround for errata 10GE_8/ENET_11")
Cc: stable@vger.kernel.org
Signed-off-by: Stephane Graber <stgraber@ubuntu.com>
Tested-by: Stephane Graber <stgraber@ubuntu.com>
Link: https://lore.kernel.org/r/20220322224205.752795-1-stgraber@ubuntu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/apm/xgene/xgene_enet_main.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
@@ -696,6 +696,12 @@ static int xgene_enet_rx_frame(struct xg
 	buf_pool->rx_skb[skb_index] = NULL;
 
 	datalen = xgene_enet_get_data_len(le64_to_cpu(raw_desc->m1));
+
+	/* strip off CRC as HW isn't doing this */
+	nv = GET_VAL(NV, le64_to_cpu(raw_desc->m0));
+	if (!nv)
+		datalen -= 4;
+
 	skb_put(skb, datalen);
 	prefetch(skb->data - NET_IP_ALIGN);
 	skb->protocol = eth_type_trans(skb, ndev);
@@ -717,12 +723,8 @@ static int xgene_enet_rx_frame(struct xg
 		}
 	}
 
-	nv = GET_VAL(NV, le64_to_cpu(raw_desc->m0));
-	if (!nv) {
-		/* strip off CRC as HW isn't doing this */
-		datalen -= 4;
+	if (!nv)
 		goto skip_jumbo;
-	}
 
 	slots = page_pool->slots - 1;
 	head = page_pool->head;

[PATCH 5.16 22/37] netfilter: nf_tables: initialize registers in nft_do_chain()

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 4c905f6740a365464e91467aa50916555b28213d upstream.

Initialize registers to avoid stack leak into userspace.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_tables_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/netfilter/nf_tables_core.c
+++ b/net/netfilter/nf_tables_core.c
@@ -162,7 +162,7 @@ nft_do_chain(struct nft_pktinfo *pkt, vo
 	struct nft_rule *const *rules;
 	const struct nft_rule *rule;
 	const struct nft_expr *expr, *last;
-	struct nft_regs regs;
+	struct nft_regs regs = {};
 	unsigned int stackptr = 0;
 	struct nft_jumpstack jumpstack[NFT_JUMP_STACK_SIZE];
 	bool genbit = READ_ONCE(net->nft.gencursor);

[PATCH 5.16 23/37] netfilter: nf_tables: validate registers coming from userspace.

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 6e1acfa387b9ff82cfc7db8cc3b6959221a95851 upstream.

Bail out in case userspace uses unsupported registers.

Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_tables_api.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -9208,17 +9208,23 @@ int nft_parse_u32_check(const struct nla
 }
 EXPORT_SYMBOL_GPL(nft_parse_u32_check);
 
-static unsigned int nft_parse_register(const struct nlattr *attr)
+static unsigned int nft_parse_register(const struct nlattr *attr, u32 *preg)
 {
 	unsigned int reg;
 
 	reg = ntohl(nla_get_be32(attr));
 	switch (reg) {
 	case NFT_REG_VERDICT...NFT_REG_4:
-		return reg * NFT_REG_SIZE / NFT_REG32_SIZE;
+		*preg = reg * NFT_REG_SIZE / NFT_REG32_SIZE;
+		break;
+	case NFT_REG32_00...NFT_REG32_15:
+		*preg = reg + NFT_REG_SIZE / NFT_REG32_SIZE - NFT_REG32_00;
+		break;
 	default:
-		return reg + NFT_REG_SIZE / NFT_REG32_SIZE - NFT_REG32_00;
+		return -ERANGE;
 	}
+
+	return 0;
 }
 
 /**
@@ -9260,7 +9266,10 @@ int nft_parse_register_load(const struct
 	u32 reg;
 	int err;
 
-	reg = nft_parse_register(attr);
+	err = nft_parse_register(attr, &reg);
+	if (err < 0)
+		return err;
+
 	err = nft_validate_register_load(reg, len);
 	if (err < 0)
 		return err;
@@ -9315,7 +9324,10 @@ int nft_parse_register_store(const struc
 	int err;
 	u32 reg;
 
-	reg = nft_parse_register(attr);
+	err = nft_parse_register(attr, &reg);
+	if (err < 0)
+		return err;
+
 	err = nft_validate_register_store(ctx, reg, data, type, len);
 	if (err < 0)
 		return err;

[PATCH 5.16 24/37] ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board

[Greg Kroah-Hartman]

From: Mark Cilissen <mark@yotsuba.nl>

commit e702196bf85778f2c5527ca47f33ef2e2fca8297 upstream.

On this board the ACPI RSDP structure points to both a RSDT and an XSDT,
but the XSDT points to a truncated FADT. This causes all sorts of trouble
and usually a complete failure to boot after the following error occurs:

  ACPI Error: Unsupported address space: 0x20 (*/hwregs-*)
  ACPI Error: AE_SUPPORT, Unable to initialize fixed events (*/evevent-*)
  ACPI: Unable to start ACPI Interpreter

This leaves the ACPI implementation in such a broken state that subsequent
kernel subsystem initialisations go wrong, resulting in among others
mismapped PCI memory, SATA and USB enumeration failures, and freezes.

As this is an older embedded platform that will likely never see any BIOS
updates to address this issue and its default shipping OS only complies to
ACPI 1.0, work around this by forcing `acpi=rsdt`. This patch, applied on
top of Linux 5.10.102, was confirmed on real hardware to fix the issue.

Signed-off-by: Mark Cilissen <mark@yotsuba.nl>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/acpi/boot.c |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1328,6 +1328,17 @@ static int __init disable_acpi_pci(const
 	return 0;
 }
 
+static int __init disable_acpi_xsdt(const struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		pr_notice("%s detected: force use of acpi=rsdt\n", d->ident);
+		acpi_gbl_do_not_use_xsdt = TRUE;
+	} else {
+		pr_notice("Warning: DMI blacklist says broken, but acpi XSDT forced\n");
+	}
+	return 0;
+}
+
 static int __init dmi_disable_acpi(const struct dmi_system_id *d)
 {
 	if (!acpi_force) {
@@ -1451,6 +1462,19 @@ static const struct dmi_system_id acpi_d
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
+	/*
+	 * Boxes that need ACPI XSDT use disabled due to corrupted tables
+	 */
+	{
+	 .callback = disable_acpi_xsdt,
+	 .ident = "Advantech DAC-BJ01",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "Bearlake CRB Board"),
+		     DMI_MATCH(DMI_BIOS_VERSION, "V1.12"),
+		     DMI_MATCH(DMI_BIOS_DATE, "02/01/2011"),
+		     },
+	 },
 	{}
 };
 

[PATCH 5.16 25/37] ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3

[Greg Kroah-Hartman]

From: Maximilian Luz <luzmaximilian@gmail.com>

commit 7dacee0b9efc8bd061f097b1a8d4daa6591af0c6 upstream.

For some reason, the Microsoft Surface Go 3 uses the standard ACPI
interface for battery information, but does not use the standard PNP0C0A
HID. Instead it uses MSHW0146 as identifier. Add that ID to the driver
as this seems to work well.

Additionally, the power state is not updated immediately after the AC
has been (un-)plugged, so add the respective quirk for that.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/battery.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -60,6 +60,10 @@ MODULE_PARM_DESC(cache_time, "cache time
 
 static const struct acpi_device_id battery_device_ids[] = {
 	{"PNP0C0A", 0},
+
+	/* Microsoft Surface Go 3 */
+	{"MSHW0146", 0},
+
 	{"", 0},
 };
 
@@ -1177,6 +1181,14 @@ static const struct dmi_system_id bat_dm
 			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
 		},
 	},
+	{
+		/* Microsoft Surface Go 3 */
+		.callback = battery_notification_delay_quirk,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"),
+		},
+	},
 	{},
 };
 

[PATCH 5.16 26/37] ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU

[Greg Kroah-Hartman]

From: Werner Sembach <wse@tuxedocomputers.com>

commit c844d22fe0c0b37dc809adbdde6ceb6462c43acf upstream.

Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a working
native and video interface. However the default detection mechanism first
registers the video interface before unregistering it again and switching
to the native interface during boot. This results in a dangling SBIOS
request for backlight change for some reason, causing the backlight to
switch to ~2% once per boot on the first power cord connect or disconnect
event. Setting the native interface explicitly circumvents this buggy
behaviour by avoiding the unregistering process.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/video_detect.c |   75 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -417,6 +417,81 @@ static const struct dmi_system_id video_
 		DMI_MATCH(DMI_PRODUCT_NAME, "GA503"),
 		},
 	},
+	/*
+	 * Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a
+	 * working native and video interface. However the default detection
+	 * mechanism first registers the video interface before unregistering
+	 * it again and switching to the native interface during boot. This
+	 * results in a dangling SBIOS request for backlight change for some
+	 * reason, causing the backlight to switch to ~2% once per boot on the
+	 * first power cord connect or disconnect event. Setting the native
+	 * interface explicitly circumvents this buggy behaviour, by avoiding
+	 * the unregistering process.
+	 */
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xRU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xRU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xRU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xRU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+		DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xRU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+		DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xNU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xNU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xNU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+		},
+	},
 
 	/*
 	 * Desktops which falsely report a backlight and which our heuristics

[PATCH 5.16 27/37] crypto: qat - disable registration of algorithms

[Greg Kroah-Hartman]

From: Giovanni Cabiddu <giovanni.cabiddu@intel.com>

commit 8893d27ffcaf6ec6267038a177cb87bcde4dd3de upstream.

The implementations of aead and skcipher in the QAT driver do not
support properly requests with the CRYPTO_TFM_REQ_MAY_BACKLOG flag set.
If the HW queue is full, the driver returns -EBUSY but does not enqueue
the request.
This can result in applications like dm-crypt waiting indefinitely for a
completion of a request that was never submitted to the hardware.

To avoid this problem, disable the registration of all crypto algorithms
in the QAT driver by setting the number of crypto instances to 0 at
configuration time.

Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/qat/qat_4xxx/adf_drv.c      |    7 +++++++
 drivers/crypto/qat/qat_common/qat_crypto.c |    7 +++++++
 2 files changed, 14 insertions(+)

--- a/drivers/crypto/qat/qat_4xxx/adf_drv.c
+++ b/drivers/crypto/qat/qat_4xxx/adf_drv.c
@@ -52,6 +52,13 @@ static int adf_crypto_dev_config(struct
 	if (ret)
 		goto err;
 
+	/* Temporarily set the number of crypto instances to zero to avoid
+	 * registering the crypto algorithms.
+	 * This will be removed when the algorithms will support the
+	 * CRYPTO_TFM_REQ_MAY_BACKLOG flag
+	 */
+	instances = 0;
+
 	for (i = 0; i < instances; i++) {
 		val = i;
 		bank = i * 2;
--- a/drivers/crypto/qat/qat_common/qat_crypto.c
+++ b/drivers/crypto/qat/qat_common/qat_crypto.c
@@ -136,6 +136,13 @@ int qat_crypto_dev_config(struct adf_acc
 	if (ret)
 		goto err;
 
+	/* Temporarily set the number of crypto instances to zero to avoid
+	 * registering the crypto algorithms.
+	 * This will be removed when the algorithms will support the
+	 * CRYPTO_TFM_REQ_MAY_BACKLOG flag
+	 */
+	instances = 0;
+
 	for (i = 0; i < instances; i++) {
 		val = i;
 		snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_ASYM_BANK_NUM, i);

[PATCH 5.16 28/37] Bluetooth: btusb: Add one more Bluetooth part for the Realtek RTL8852AE

[Greg Kroah-Hartman]

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 2e7b4a328ed6ea57d22853939e69bc86c560996d upstream.

This Realtek device has both wifi and BT components. The latter reports
a USB ID of 0bda:2852, which is not in the table.

BT device description in /sys/kernel/debug/usb/devices contains the following entries:

T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=2852 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms

The missing USB_ID was reported by user trius65 at https://github.com/lwfinger/rtw89/issues/122

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btusb.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -404,6 +404,8 @@ static const struct usb_device_id blackl
 						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Realtek 8852AE Bluetooth devices */
+	{ USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0bda, 0x385a), .driver_info = BTUSB_REALTEK |

[PATCH 5.16 29/37] Revert "ath: add support for special 0x0 regulatory domain"

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

commit 1ec7ed5163c70a0d040150d2279f932c7e7c143f upstream.

This reverts commit 2dc016599cfa9672a147528ca26d70c3654a5423.

Users are reporting regressions in regulatory domain detection and
channel availability.

The problem this was trying to resolve was fixed in firmware anyway:

    QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042
    https://github.com/kvalo/ath10k-firmware/commit/4d382787f0efa77dba40394e0bc604f8eff82552

Link: https://bbs.archlinux.org/viewtopic.php?id=254535
Link: http://lists.infradead.org/pipermail/ath10k/2020-April/014871.html
Link: http://lists.infradead.org/pipermail/ath10k/2020-May/015152.html
Link: https://lore.kernel.org/all/1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at/
Fixes: 2dc016599cfa ("ath: add support for special 0x0 regulatory domain")
Cc: <stable@vger.kernel.org>
Cc: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20200527165718.129307-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ath/regd.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -667,14 +667,14 @@ ath_regd_init_wiphy(struct ath_regulator
 
 /*
  * Some users have reported their EEPROM programmed with
- * 0x8000 or 0x0 set, this is not a supported regulatory
- * domain but since we have more than one user with it we
- * need a solution for them. We default to 0x64, which is
- * the default Atheros world regulatory domain.
+ * 0x8000 set, this is not a supported regulatory domain
+ * but since we have more than one user with it we need
+ * a solution for them. We default to 0x64, which is the
+ * default Atheros world regulatory domain.
  */
 static void ath_regd_sanitize(struct ath_regulatory *reg)
 {
-	if (reg->current_rd != COUNTRY_ERD_FLAG && reg->current_rd != 0)
+	if (reg->current_rd != COUNTRY_ERD_FLAG)
 		return;
 	printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
 	reg->current_rd = 0x64;

[PATCH 5.16 30/37] drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free()

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit 6b79f96f4a23846516e5e6e4dd37fc06f43a60dd upstream.

If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it
happened in the bug report by syzbot), virtio_gpu_array_put_free() could be
called with objs equal to NULL.

Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise
return from the function.

Cc: stable@vger.kernel.org # 5.13.x
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reported-by: syzbot+e9072e90624a31dfa85f@syzkaller.appspotmail.com
Fixes: 377f8331d0565 ("drm/virtio: fix possible leak/unlock virtio_gpu_object_array")
Link: http://patchwork.freedesktop.org/patch/msgid/20211213183122.838119-1-roberto.sassu@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/virtio/virtgpu_gem.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/virtio/virtgpu_gem.c
+++ b/drivers/gpu/drm/virtio/virtgpu_gem.c
@@ -248,6 +248,9 @@ void virtio_gpu_array_put_free(struct vi
 {
 	u32 i;
 
+	if (!objs)
+		return;
+
 	for (i = 0; i < objs->nents; i++)
 		drm_gem_object_put(objs->objs[i]);
 	virtio_gpu_array_free(objs);

[PATCH 5.16 31/37] rcu: Dont deboost before reporting expedited quiescent state

[Greg Kroah-Hartman]

From: Paul E. McKenney <paulmck@kernel.org>

commit 10c535787436d62ea28156a4b91365fd89b5a432 upstream.

Currently rcu_preempt_deferred_qs_irqrestore() releases rnp->boost_mtx
before reporting the expedited quiescent state.  Under heavy real-time
load, this can result in this function being preempted before the
quiescent state is reported, which can in turn prevent the expedited grace
period from completing.  Tim Murray reports that the resulting expedited
grace periods can take hundreds of milliseconds and even more than one
second, when they should normally complete in less than a millisecond.

This was fine given that there were no particular response-time
constraints for synchronize_rcu_expedited(), as it was designed
for throughput rather than latency.  However, some users now need
sub-100-millisecond response-time constratints.

This patch therefore follows Neeraj's suggestion (seconded by Tim and
by Uladzislau Rezki) of simply reversing the two operations.

Reported-by: Tim Murray <timmurray@google.com>
Reported-by: Joel Fernandes <joelaf@google.com>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Tim Murray <timmurray@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/rcu/tree_plugin.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -554,16 +554,16 @@ rcu_preempt_deferred_qs_irqrestore(struc
 			raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
 		}
 
-		/* Unboost if we were boosted. */
-		if (IS_ENABLED(CONFIG_RCU_BOOST) && drop_boost_mutex)
-			rt_mutex_futex_unlock(&rnp->boost_mtx.rtmutex);
-
 		/*
 		 * If this was the last task on the expedited lists,
 		 * then we need to report up the rcu_node hierarchy.
 		 */
 		if (!empty_exp && empty_exp_now)
 			rcu_report_exp_rnp(rnp, true);
+
+		/* Unboost if we were boosted. */
+		if (IS_ENABLED(CONFIG_RCU_BOOST) && drop_boost_mutex)
+			rt_mutex_futex_unlock(&rnp->boost_mtx.rtmutex);
 	} else {
 		local_irq_restore(flags);
 	}

[PATCH 5.16 32/37] uaccess: fix integer overflow on access_ok()

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 222ca305c9fd39e5ed8104da25c09b2b79a516a8 upstream.

Three architectures check the end of a user access against the
address limit without taking a possible overflow into account.
Passing a negative length or another overflow in here returns
success when it should not.

Use the most common correct implementation here, which optimizes
for a constant 'size' argument, and turns the common case into a
single comparison.

Cc: stable@vger.kernel.org
Fixes: da551281947c ("csky: User access")
Fixes: f663b60f5215 ("microblaze: Fix uaccess_ok macro")
Fixes: 7567746e1c0d ("Hexagon: Add user access functions")
Reported-by: David Laight <David.Laight@aculab.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/csky/include/asm/uaccess.h       |    7 +++----
 arch/hexagon/include/asm/uaccess.h    |   18 +++++++++---------
 arch/microblaze/include/asm/uaccess.h |   19 ++++---------------
 3 files changed, 16 insertions(+), 28 deletions(-)

--- a/arch/csky/include/asm/uaccess.h
+++ b/arch/csky/include/asm/uaccess.h
@@ -3,14 +3,13 @@
 #ifndef __ASM_CSKY_UACCESS_H
 #define __ASM_CSKY_UACCESS_H
 
-#define user_addr_max() \
-	(uaccess_kernel() ? KERNEL_DS.seg : get_fs().seg)
+#define user_addr_max() (current_thread_info()->addr_limit.seg)
 
 static inline int __access_ok(unsigned long addr, unsigned long size)
 {
-	unsigned long limit = current_thread_info()->addr_limit.seg;
+	unsigned long limit = user_addr_max();
 
-	return ((addr < limit) && ((addr + size) < limit));
+	return (size <= limit) && (addr <= (limit - size));
 }
 #define __access_ok __access_ok
 
--- a/arch/hexagon/include/asm/uaccess.h
+++ b/arch/hexagon/include/asm/uaccess.h
@@ -25,17 +25,17 @@
  * Returns true (nonzero) if the memory block *may* be valid, false (zero)
  * if it is definitely invalid.
  *
- * User address space in Hexagon, like x86, goes to 0xbfffffff, so the
- * simple MSB-based tests used by MIPS won't work.  Some further
- * optimization is probably possible here, but for now, keep it
- * reasonably simple and not *too* slow.  After all, we've got the
- * MMU for backup.
  */
+#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
+#define user_addr_max() (uaccess_kernel() ? ~0UL : TASK_SIZE)
 
-#define __access_ok(addr, size) \
-	((get_fs().seg == KERNEL_DS.seg) || \
-	(((unsigned long)addr < get_fs().seg) && \
-	  (unsigned long)size < (get_fs().seg - (unsigned long)addr)))
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+	unsigned long limit = TASK_SIZE;
+
+	return (size <= limit) && (addr <= (limit - size));
+}
+#define __access_ok __access_ok
 
 /*
  * When a kernel-mode page fault is taken, the faulting instruction
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -39,24 +39,13 @@
 
 # define uaccess_kernel()	(get_fs().seg == KERNEL_DS.seg)
 
-static inline int access_ok(const void __user *addr, unsigned long size)
+static inline int __access_ok(unsigned long addr, unsigned long size)
 {
-	if (!size)
-		goto ok;
+	unsigned long limit = user_addr_max();
 
-	if ((get_fs().seg < ((unsigned long)addr)) ||
-			(get_fs().seg < ((unsigned long)addr + size - 1))) {
-		pr_devel("ACCESS fail at 0x%08x (size 0x%x), seg 0x%08x\n",
-			(__force u32)addr, (u32)size,
-			(u32)get_fs().seg);
-		return 0;
-	}
-ok:
-	pr_devel("ACCESS OK at 0x%08x (size 0x%x), seg 0x%08x\n",
-			(__force u32)addr, (u32)size,
-			(u32)get_fs().seg);
-	return 1;
+	return (size <= limit) && (addr <= (limit - size));
 }
+#define access_ok(addr, size) __access_ok((unsigned long)addr, size)
 
 # define __FIXUP_SECTION	".section .fixup,\"ax\"\n"
 # define __EX_TABLE_SECTION	".section __ex_table,\"a\"\n"

[PATCH 5.16 33/37] mac80211: fix potential double free on mesh join

[Greg Kroah-Hartman]

From: Linus Lüssing <ll@simonwunderlich.de>

commit 4a2d4496e15ea5bb5c8e83b94ca8ca7fb045e7d3 upstream.

While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving
mesh") fixed a memory leak on mesh leave / teardown it introduced a
potential memory corruption caused by a double free when rejoining the
mesh:

  ieee80211_leave_mesh()
  -> kfree(sdata->u.mesh.ie);
  ...
  ieee80211_join_mesh()
  -> copy_mesh_setup()
     -> old_ie = ifmsh->ie;
     -> kfree(old_ie);

This double free / kernel panics can be reproduced by using wpa_supplicant
with an encrypted mesh (if set up without encryption via "iw" then
ifmsh->ie is always NULL, which avoids this issue). And then calling:

  $ iw dev mesh0 mesh leave
  $ iw dev mesh0 mesh join my-mesh

Note that typically these commands are not used / working when using
wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going
through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join
where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of
default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids
the memory corruption, too.

The issue was first observed in an application which was not using
wpa_supplicant but "Senf" instead, which implements its own calls to
nl80211.

Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh
join function and leaving it solely up to the mesh leave to free the
mesh IE.

Cc: stable@vger.kernel.org
Fixes: 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh")
Reported-by: Matthias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Tested-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Link: https://lore.kernel.org/r/20220310183513.28589-1-linus.luessing@c0d3.blue
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/cfg.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2148,14 +2148,12 @@ static int copy_mesh_setup(struct ieee80
 		const struct mesh_setup *setup)
 {
 	u8 *new_ie;
-	const u8 *old_ie;
 	struct ieee80211_sub_if_data *sdata = container_of(ifmsh,
 					struct ieee80211_sub_if_data, u.mesh);
 	int i;
 
 	/* allocate information elements */
 	new_ie = NULL;
-	old_ie = ifmsh->ie;
 
 	if (setup->ie_len) {
 		new_ie = kmemdup(setup->ie, setup->ie_len,
@@ -2165,7 +2163,6 @@ static int copy_mesh_setup(struct ieee80
 	}
 	ifmsh->ie_len = setup->ie_len;
 	ifmsh->ie = new_ie;
-	kfree(old_ie);
 
 	/* now copy the rest of the setup parameters */
 	ifmsh->mesh_id_len = setup->mesh_id_len;

[PATCH 5.16 34/37] tpm: use try_get_ops() in tpm-space.c

[Greg Kroah-Hartman]

From: James Bottomley <James.Bottomley@HansenPartnership.com>

commit fb5abce6b2bb5cb3d628aaa63fa821da8c4600f9 upstream.

As part of the series conversion to remove nested TPM operations:

https://lore.kernel.org/all/20190205224723.19671-1-jarkko.sakkinen@linux.intel.com/

exposure of the chip->tpm_mutex was removed from much of the upper
level code.  In this conversion, tpm2_del_space() was missed.  This
didn't matter much because it's usually called closely after a
converted operation, so there's only a very tiny race window where the
chip can be removed before the space flushing is done which causes a
NULL deref on the mutex.  However, there are reports of this window
being hit in practice, so fix this by converting tpm2_del_space() to
use tpm_try_get_ops(), which performs all the teardown checks before
acquring the mutex.

Cc: stable@vger.kernel.org # 5.4.x
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/tpm/tpm2-space.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/char/tpm/tpm2-space.c
+++ b/drivers/char/tpm/tpm2-space.c
@@ -58,12 +58,12 @@ int tpm2_init_space(struct tpm_space *sp
 
 void tpm2_del_space(struct tpm_chip *chip, struct tpm_space *space)
 {
-	mutex_lock(&chip->tpm_mutex);
-	if (!tpm_chip_start(chip)) {
+
+	if (tpm_try_get_ops(chip) == 0) {
 		tpm2_flush_sessions(chip, space);
-		tpm_chip_stop(chip);
+		tpm_put_ops(chip);
 	}
-	mutex_unlock(&chip->tpm_mutex);
+
 	kfree(space->context_buf);
 	kfree(space->session_buf);
 }

[PATCH 5.16 35/37] wcn36xx: Differentiate wcn3660 from wcn3620

[Greg Kroah-Hartman]

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

commit 98d504a82cc75840bec8e3c6ae0e4f411921962b upstream.

The spread of capability between the three WiFi silicon parts wcn36xx
supports is:

wcn3620 - 802.11 a/b/g
wcn3660 - 802.11 a/b/g/n
wcn3680 - 802.11 a/b/g/n/ac

We currently treat wcn3660 as wcn3620 thus limiting it to 2GHz channels.
Fix this regression by ensuring we differentiate between all three parts.

Fixes: 8490987bdb9a ("wcn36xx: Hook and identify RF_IRIS_WCN3680")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220125004046.4058284-1-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ath/wcn36xx/main.c    |    3 +++
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |    1 +
 2 files changed, 4 insertions(+)

--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1483,6 +1483,9 @@ static int wcn36xx_platform_get_resource
 	if (iris_node) {
 		if (of_device_is_compatible(iris_node, "qcom,wcn3620"))
 			wcn->rf_id = RF_IRIS_WCN3620;
+		if (of_device_is_compatible(iris_node, "qcom,wcn3660") ||
+		    of_device_is_compatible(iris_node, "qcom,wcn3660b"))
+			wcn->rf_id = RF_IRIS_WCN3660;
 		if (of_device_is_compatible(iris_node, "qcom,wcn3680"))
 			wcn->rf_id = RF_IRIS_WCN3680;
 		of_node_put(iris_node);
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -97,6 +97,7 @@ enum wcn36xx_ampdu_state {
 
 #define RF_UNKNOWN	0x0000
 #define RF_IRIS_WCN3620	0x3620
+#define RF_IRIS_WCN3660	0x3660
 #define RF_IRIS_WCN3680	0x3680
 
 static inline void buff_to_be(u32 *buf, size_t len)

[PATCH 5.16 36/37] m68k: fix access_ok for coldfire

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 26509034bef198525d5936c116cbd0c3fa491c0b upstream.

While most m68k platforms use separate address spaces for user
and kernel space, at least coldfire does not, and the other
ones have a TASK_SIZE that is less than the entire 4GB address
range.

Using the default implementation of __access_ok() stops coldfire
user space from trivially accessing kernel memory.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/m68k/include/asm/uaccess.h |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/arch/m68k/include/asm/uaccess.h
+++ b/arch/m68k/include/asm/uaccess.h
@@ -12,14 +12,17 @@
 #include <asm/extable.h>
 
 /* We let the MMU do all checking */
-static inline int access_ok(const void __user *addr,
+static inline int access_ok(const void __user *ptr,
 			    unsigned long size)
 {
-	/*
-	 * XXX: for !CONFIG_CPU_HAS_ADDRESS_SPACES this really needs to check
-	 * for TASK_SIZE!
-	 */
-	return 1;
+	unsigned long limit = TASK_SIZE;
+	unsigned long addr = (unsigned long)ptr;
+
+	if (IS_ENABLED(CONFIG_CPU_HAS_ADDRESS_SPACES) ||
+	    !IS_ENABLED(CONFIG_MMU))
+		return 1;
+
+	return (size <= limit) && (addr <= (limit - size));
 }
 
 /*

[PATCH 5.16 37/37] nds32: fix access_ok() checks in get/put_user

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 8926d88ced46700bf6117ceaf391480b943ea9f4 upstream.

The get_user()/put_user() functions are meant to check for
access_ok(), while the __get_user()/__put_user() functions
don't.

This broke in 4.19 for nds32, when it gained an extraneous
check in __get_user(), but lost the check it needs in
__put_user().

Fixes: 487913ab18c2 ("nds32: Extract the checking and getting pointer to a macro")
Cc: stable@vger.kernel.org @ v4.19+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/nds32/include/asm/uaccess.h |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/arch/nds32/include/asm/uaccess.h
+++ b/arch/nds32/include/asm/uaccess.h
@@ -70,9 +70,7 @@ static inline void set_fs(mm_segment_t f
  * versions are void (ie, don't return a value as such).
  */
 
-#define get_user	__get_user					\
-
-#define __get_user(x, ptr)						\
+#define get_user(x, ptr)						\
 ({									\
 	long __gu_err = 0;						\
 	__get_user_check((x), (ptr), __gu_err);				\
@@ -85,6 +83,14 @@ static inline void set_fs(mm_segment_t f
 	(void)0;							\
 })
 
+#define __get_user(x, ptr)						\
+({									\
+	long __gu_err = 0;						\
+	const __typeof__(*(ptr)) __user *__p = (ptr);			\
+	__get_user_err((x), __p, (__gu_err));				\
+	__gu_err;							\
+})
+
 #define __get_user_check(x, ptr, err)					\
 ({									\
 	const __typeof__(*(ptr)) __user *__p = (ptr);			\
@@ -165,12 +171,18 @@ do {									\
 		: "r"(addr), "i"(-EFAULT)				\
 		: "cc")
 
-#define put_user	__put_user					\
+#define put_user(x, ptr)						\
+({									\
+	long __pu_err = 0;						\
+	__put_user_check((x), (ptr), __pu_err);				\
+	__pu_err;							\
+})
 
 #define __put_user(x, ptr)						\
 ({									\
 	long __pu_err = 0;						\
-	__put_user_err((x), (ptr), __pu_err);				\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
+	__put_user_err((x), __p, __pu_err);				\
 	__pu_err;							\
 })
 

Re: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Justin Forbes]

On Fri, Mar 25, 2022 at 04:14:10PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.18 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 27 Mar 2022 15:04:08 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.18-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Tested rc1 against the Fedora build system (aarch64, armv7, ppc64le,
s390x, x86_64), and boot tested x86_64. No regressions noted.

Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>

RE: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Fox Chen]

On Fri, 25 Mar 2022 16:14:10 +0100, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.16.18 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 27 Mar 2022 15:04:08 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.18-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.16.18-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Shuah Khan]

On 3/25/22 9:14 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.18 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 27 Mar 2022 15:04:08 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.18-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Florian Fainelli]

On 3/25/22 08:14, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.18 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 27 Mar 2022 15:04:08 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.18-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Naresh Kamboju]

On Fri, 25 Mar 2022 at 20:47, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.16.18 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 27 Mar 2022 15:04:08 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.18-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.16.18-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.16.y
* git commit: f6cd6b12e190ef5b92d82a341e76d8a9cd7cd284
* git describe: v5.16.17-38-gf6cd6b12e190
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.16.y/build/v5.16.17-38-gf6cd6b12e190

## Test Regressions (compared to v5.16.17)
No test regressions found.

## Metric Regressions (compared to v5.16.17)
No metric regressions found.

## Test Fixes (compared to v5.16.17)
No test fixes found.

## Metric Fixes (compared to v5.16.17)
No metric fixes found.

## Test result summary
total: 104880, pass: 88707, fail: 1055, skip: 13919, xfail: 1199

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 293 total, 293 passed, 0 failed
* arm64: 43 total, 43 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 42 total, 42 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 60 total, 54 passed, 6 failed
* riscv: 27 total, 22 passed, 5 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 43 total, 43 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* timesync-off
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Jeffrin Thalakkottoor]

On Fri, Mar 25, 2022 at 11:30 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.16.18 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 27 Mar 2022 15:04:08 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.18-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
hello,

Compiled and booted  5.16.18-rc1+ on ...
Processor Information
    Socket Designation: FM2
    Type: Central Processor
    Family: A-Series
    Manufacturer: AuthenticAMD
    ID: 31 0F 61 00 FF FB 8B 17
    Signature: Family 21, Model 19, Stepping 1

NO new regression and issue from dmesg

Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>

-- 
software engineer
rajagiri school of engineering and technology

Re: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Bagas Sanjaya]

On 25/03/22 22.14, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.18 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0)
and powerpc (ps3_defconfig, gcc 11.2.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

Re: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Ron Economos]

On 3/25/22 8:14 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.18 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 27 Mar 2022 15:04:08 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.18-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Guenter Roeck]

On Fri, Mar 25, 2022 at 04:14:10PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.18 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 488 pass: 488 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Greg Kroah-Hartman]

On Sat, Mar 26, 2022 at 11:39:35AM +0100, Luna Jernberg wrote:
> Works on my i7 4790k with EndeavourOS
> 
> 
> Tested-by: Luna Jernberg <droidbittin@gmail.com>

Please do not send html email to the lists, nor top post.

thanks for testing!

greg k-h

Re: [PATCH 5.16 00/37] 5.16.18-rc1 review

[Jon Hunter]

On Fri, 25 Mar 2022 16:14:10 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.18 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 27 Mar 2022 15:04:08 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.18-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.16:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    122 tests:	122 pass, 0 fail

Linux version:	5.16.18-rc1-gf6cd6b12e190
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon