stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Mark Gross <markgross@kernel.org>, Andy Shevchenko <andy@kernel.org>
Cc: "Hans de Goede" <hdegoede@redhat.com>,
	"Barnabás Pőcze" <pobrn@protonmail.com>,
	"Kai Heng Feng" <kai.heng.feng@canonical.com>,
	"Maxim Mikityanskiy" <maxtram95@gmail.com>,
	"GOESSEL Guillaume" <g_goessel@outlook.com>,
	"Jiaxun Yang" <jiaxun.yang@flygoat.com>,
	"Manyi Li" <limanyi@uniontech.com>,
	"Eray Orçunus" <erayorcunus@gmail.com>,
	"Philipp Jungkamp" <p.jungkamp@gmx.net>,
	"Arnav Rawat" <arnavr3@illinois.edu>,
	"Kelly Anderson" <kelly@xilka.com>,
	"Meng Dong" <whenov@gmail.com>,
	"Felix Eckhofer" <felix@eckhofer.com>,
	"Ike Panhc" <ike.pan@canonical.com>,
	platform-driver-x86@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH] platform/x86: ideapad-laptop: Stop sending KEY_TOUCHPAD_TOGGLE
Date: Thu, 30 Mar 2023 21:46:44 +0200	[thread overview]
Message-ID: <20230330194644.64628-1-hdegoede@redhat.com> (raw)

Commit 5829f8a897e4 ("platform/x86: ideapad-laptop: Send
KEY_TOUCHPAD_TOGGLE on some models") made ideapad-laptop send
KEY_TOUCHPAD_TOGGLE when we receive an ACPI notify with VPC event bit 5 set
and the touchpad-state has not been changed by the EC itself already.

This was done under the assumption that this would be good to do to make
the touchpad-toggle hotkey work on newer models where the EC does not
toggle the touchpad on/off itself (because it is not routed through
the PS/2 controller, but uses I2C).

But it turns out that at least some models, e.g. the Yoga 7-15ITL5 the EC
triggers an ACPI notify with VPC event bit 5 set on resume, which would
now cause a spurious KEY_TOUCHPAD_TOGGLE on resume to which the desktop
environment responds by disabling the touchpad in software, breaking
the touchpad (until manually re-enabled) on resume.

It was never confirmed that sending KEY_TOUCHPAD_TOGGLE actually improves
things on new models and at least some new models like the Yoga 7-15ITL5
don't have a touchpad on/off toggle hotkey at all, while still sending
ACPI notify events with VPC event bit 5 set.

So it seems best to revert the change to send KEY_TOUCHPAD_TOGGLE when
receiving an ACPI notify events with VPC event bit 5 and the touchpad
state as reported by the EC has not changed.

Note this is not a full revert the code to cache the last EC touchpad
state is kept to avoid sending spurious KEY_TOUCHPAD_ON / _OFF events
on resume.

Fixes: 5829f8a897e4 ("platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217234
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/platform/x86/ideapad-laptop.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index b5ef3452da1f..35c63cce0479 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -1170,7 +1170,6 @@ static const struct key_entry ideapad_keymap[] = {
 	{ KE_KEY,  65, { KEY_PROG4 } },
 	{ KE_KEY,  66, { KEY_TOUCHPAD_OFF } },
 	{ KE_KEY,  67, { KEY_TOUCHPAD_ON } },
-	{ KE_KEY,  68, { KEY_TOUCHPAD_TOGGLE } },
 	{ KE_KEY, 128, { KEY_ESC } },
 
 	/*
@@ -1526,18 +1525,16 @@ static void ideapad_sync_touchpad_state(struct ideapad_private *priv, bool send_
 	if (priv->features.ctrl_ps2_aux_port)
 		i8042_command(&param, value ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE);
 
-	if (send_events) {
-		/*
-		 * On older models the EC controls the touchpad and toggles it
-		 * on/off itself, in this case we report KEY_TOUCHPAD_ON/_OFF.
-		 * If the EC did not toggle, report KEY_TOUCHPAD_TOGGLE.
-		 */
-		if (value != priv->r_touchpad_val) {
-			ideapad_input_report(priv, value ? 67 : 66);
-			sysfs_notify(&priv->platform_device->dev.kobj, NULL, "touchpad");
-		} else {
-			ideapad_input_report(priv, 68);
-		}
+	/*
+	 * On older models the EC controls the touchpad and toggles it on/off
+	 * itself, in this case we report KEY_TOUCHPAD_ON/_OFF. Some models do
+	 * an acpi-notify with VPC bit 5 set on resume, so this function get
+	 * called with send_events=true on every resume. Therefor if the EC did
+	 * not toggle, do nothing to avoid sending spurious KEY_TOUCHPAD_TOGGLE.
+	 */
+	if (send_events && value != priv->r_touchpad_val) {
+		ideapad_input_report(priv, value ? 67 : 66);
+		sysfs_notify(&priv->platform_device->dev.kobj, NULL, "touchpad");
 	}
 
 	priv->r_touchpad_val = value;
-- 
2.39.1


             reply	other threads:[~2023-03-30 19:48 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-30 19:46 Hans de Goede [this message]
2023-03-31  9:51 ` [PATCH] platform/x86: ideapad-laptop: Stop sending KEY_TOUCHPAD_TOGGLE Maxim Mikityanskiy
2023-04-03 20:51   ` Maxim Mikityanskiy
2023-04-04  7:56     ` Hans de Goede
2023-03-31 17:38 ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230330194644.64628-1-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=andy@kernel.org \
    --cc=arnavr3@illinois.edu \
    --cc=erayorcunus@gmail.com \
    --cc=felix@eckhofer.com \
    --cc=g_goessel@outlook.com \
    --cc=ike.pan@canonical.com \
    --cc=jiaxun.yang@flygoat.com \
    --cc=kai.heng.feng@canonical.com \
    --cc=kelly@xilka.com \
    --cc=limanyi@uniontech.com \
    --cc=markgross@kernel.org \
    --cc=maxtram95@gmail.com \
    --cc=p.jungkamp@gmx.net \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=pobrn@protonmail.com \
    --cc=stable@vger.kernel.org \
    --cc=whenov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).