stable.vger.kernel.org archive mirror

 messages from 2018-11-29 14:11:38 to 2018-11-29 14:12:36 UTC [more...]

[PATCH 4.19 000/110] 4.19.6-stable review
 2018-11-29 14:12 UTC  (15+ messages)
` [PATCH 4.19 009/110] xhci: handle port status events for removed USB3 hcd
` [PATCH 4.19 012/110] usb: xhci: fix timeout for transition from RExit to U0
` [PATCH 4.19 014/110] usb: xhci: Prevent bus suspend if a port connect change or polling state is detected
` [PATCH 4.19 016/110] MAINTAINERS: Add Sasha as a stable branch maintainer
` [PATCH 4.19 018/110] Documentation/security-bugs: Postpone fix publication in exceptional cases
` [PATCH 4.19 027/110] opp: ti-opp-supply: Dynamically update u_volt_min
` [PATCH 4.19 038/110] mm/memory.c: recheck page table entry with page table lock held
` [PATCH 4.19 039/110] tcp: do not release socket ownership in tcp_close()
` [PATCH 4.19 045/110] drm/ast: change resolution may cause screen blurred
` [PATCH 4.19 053/110] can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions
` [PATCH 4.19 057/110] can: raw: check for CAN FD capable netdev in raw_sendmsg()
` [PATCH 4.19 059/110] can: flexcan: Always use last mailbox for TX
` [PATCH 4.19 063/110] fsnotify: generalize handling of extra event flags
` [PATCH 4.19 065/110] pinctrl: meson: fix pinconf bias disable

[PATCH 4.14 000/100] 4.14.85-stable review
 2018-11-29 14:12 UTC  (37+ messages)
` [PATCH 4.14 010/100] xhci: Add check for invalid byte size error when UAS devices are connected
` [PATCH 4.14 011/100] usb: xhci: fix timeout for transition from RExit to U0
` [PATCH 4.14 013/100] MAINTAINERS: Add Sasha as a stable branch maintainer
` [PATCH 4.14 014/100] mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL
` [PATCH 4.14 015/100] gpio: dont free unallocated ida on gpiochip_add_data_with_key() error path
` [PATCH 4.14 016/100] iwlwifi: mvm: support sta_statistics() even on older firmware
` [PATCH 4.14 018/100] iwlwifi: mvm: dont use SAR Geo if basic SAR is not used
` [PATCH 4.14 019/100] brcmfmac: fix reporting support for 160 MHz channels
` [PATCH 4.14 021/100] v9fs_dir_readdir: fix double-free on p9stat_read error
` [PATCH 4.14 022/100] selinux: Add __GFP_NOWARN to allocation at str_read()
` [PATCH 4.14 026/100] gfs2: Dont leave s_fs_info pointing to freed memory in init_sbd
` [PATCH 4.14 027/100] llc: do not use sk_eat_skb()
` [PATCH 4.14 028/100] mm: dont warn about large allocations for slab
` [PATCH 4.14 034/100] drm/ast: fixed cursor may disappear sometimes
` [PATCH 4.14 041/100] can: rx-offload: rename can_rx_offload_irq_queue_err_skb() to can_rx_offload_queue_tail()
` [PATCH 4.14 046/100] pinctrl: meson: fix pinconf bias disable
` [PATCH 4.14 047/100] KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE
` [PATCH 4.14 048/100] cpufreq: imx6q: add return value check for voltage scale
` [PATCH 4.14 049/100] rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_write
` [PATCH 4.14 050/100] crypto: simd - correctly take reqsize of wrapped skcipher into account
` [PATCH 4.14 051/100] floppy: fix race condition in __floppy_read_block_0()
` [PATCH 4.14 052/100] powerpc/io: Fix the IO workarounds code to work with Radix
` [PATCH 4.14 053/100] perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs
` [PATCH 4.14 054/100] ARM: make lookup_processor_type() non-__init
` [PATCH 4.14 055/100] ARM: clean up per-processor check_bugs method call
` [PATCH 4.14 056/100] ARM: add PROC_VTABLE and PROC_TABLE macros
` [PATCH 4.14 057/100] ARM: spectre-v2: per-CPU vtables to work around big.Little systems
` [PATCH 4.14 058/100] SUNRPC: Fix a bogus get/put in generic_key_to_expire()
` [PATCH 4.14 059/100] kdb: Use strscpy with destination buffer size
` [PATCH 4.14 060/100] powerpc/numa: Suppress "VPHN is not supported" messages
` [PATCH 4.14 061/100] efi/arm: Revert deferred unmap of early memmap mapping
` [PATCH 4.14 062/100] z3fold: fix possible reclaim races
` [PATCH 4.14 063/100] tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
` [PATCH 4.14 064/100] mm, page_alloc: check for max order in hot path
` [PATCH 4.14 065/100] of: add helper to lookup compatible child node
` [PATCH 4.14 066/100] NFC: nfcmrvl_uart: fix OF child-node lookup

[PATCH 3.18 00/83] 3.18.128-stable review
 2018-11-29 14:12 UTC  (57+ messages)
` [PATCH 3.18 20/83] Input: initialize device counter variables with -1
` [PATCH 3.18 21/83] Input: xpad - add rumble support for Xbox One controller
` [PATCH 3.18 22/83] Input: xpad - set the LEDs properly on XBox Wireless controllers
` [PATCH 3.18 23/83] Input: xpad - re-send LED command on present event
` [PATCH 3.18 24/83] Input: xpad - add Covert Forces edition of the Xbox One controller
` [PATCH 3.18 25/83] Input: xpad - fix Razer Atrox Arcade Stick button mapping
` [PATCH 3.18 26/83] Input: xpad - clarify LED enumeration
` [PATCH 3.18 27/83] Input: xpad - use ida() for finding the pad_nr
` [PATCH 3.18 28/83] Input: xpad - remove needless bulk out URB used for LED setup
` [PATCH 3.18 29/83] Input: xpad - factor out URB submission in xpad_play_effect
` [PATCH 3.18 30/83] Input: xpad - x360w: report dpad as buttons and axes
` [PATCH 3.18 31/83] Input: xpad - move the input device creation to a new function
` [PATCH 3.18 32/83] Input: xpad - query wireless controller state at init
` [PATCH 3.18 33/83] Input: xpad - fix clash of presence handling with LED setting
` [PATCH 3.18 34/83] Input: xpad - remove spurious events of wireless xpad 360 controller
` [PATCH 3.18 35/83] Input: xpad - handle "present" and "gone" correctly
` [PATCH 3.18 36/83] Input: xpad - correctly handle concurrent LED and FF requests
` [PATCH 3.18 37/83] Input: xpad - update Xbox One Force Feedback Support
` [PATCH 3.18 38/83] Input: xpad - workaround dead irq_out after suspend/ resume
` [PATCH 3.18 39/83] Input: xpad - use LED API when identifying wireless controllers
` [PATCH 3.18 40/83] Input: xpad - correct xbox one pad device name
` [PATCH 3.18 41/83] Input: xpad - remove unused function
` [PATCH 3.18 42/83] Input: xpad - add Mad Catz FightStick TE 2 VID/PID
` [PATCH 3.18 43/83] Input: xpad - move pending clear to the correct location
` [PATCH 3.18 44/83] Input: xpad - prevent spurious input from wired Xbox 360 controllers
` [PATCH 3.18 45/83] Input: xpad - add more third-party controllers
` [PATCH 3.18 46/83] Input: xpad - xbox one elite controller support
` [PATCH 3.18 47/83] Input: xpad - fix rumble on Xbox One controllers with 2015 firmware
` [PATCH 3.18 48/83] Input: xpad - fix oops when attaching an unknown Xbox One gamepad
` [PATCH 3.18 49/83] Input: xpad - power off wireless 360 controllers on suspend
` [PATCH 3.18 50/83] Input: xpad - add product ID for Xbox One S pad
` [PATCH 3.18 51/83] Input: xpad - fix Xbox One rumble stopping after 2.5 secs
` [PATCH 3.18 52/83] Input: xpad - use correct product id for x360w controllers
` [PATCH 3.18 53/83] Input: xpad - correctly sort vendor ids
` [PATCH 3.18 54/83] Input: xpad - move reporting xbox one home button to common function
` [PATCH 3.18 55/83] Input: xpad - simplify error condition in init_output
` [PATCH 3.18 56/83] Input: xpad - dont depend on endpoint order
` [PATCH 3.18 57/83] Input: xpad - fix stuck mode button on Xbox One S pad
` [PATCH 3.18 58/83] Input: xpad - restore LED state after device resume
` [PATCH 3.18 59/83] Input: xpad - support some quirky Xbox One pads
` [PATCH 3.18 60/83] Input: xpad - sort supported devices by USB ID
` [PATCH 3.18 61/83] Input: xpad - sync supported devices with xboxdrv
` [PATCH 3.18 62/83] Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth
` [PATCH 3.18 63/83] Input: xpad - sync supported devices with 360Controller
` [PATCH 3.18 64/83] Input: xpad - sync supported devices with XBCD
` [PATCH 3.18 65/83] Input: xpad - constify usb_device_id
` [PATCH 3.18 66/83] Input: xpad - fix PowerA init quirk for some gamepad models
` [PATCH 3.18 67/83] Input: xpad - validate USB endpoint type during probe
` [PATCH 3.18 68/83] Input: xpad - add support for PDP Xbox One controllers
` [PATCH 3.18 69/83] Input: xpad - add PDP device id 0x02a4
` [PATCH 3.18 70/83] Input: xpad - fix some coding style issues
` [PATCH 3.18 71/83] Input: xpad - avoid using __set_bit() for capabilities
` [PATCH 3.18 72/83] Input: xpad - add GPD Win 2 Controller USB IDs
` [PATCH 3.18 73/83] Input: xpad - fix GPD Win 2 controller name
` [PATCH 3.18 74/83] Input: xpad - add support for Xbox1 PDP Camo series gamepad
` [PATCH 3.18 75/83] cw1200: Dont leak memory if krealloc failes

[PATCH 4.4 00/86] 4.4.166-stable review
 2018-11-29 14:12 UTC  (52+ messages)
` [PATCH 4.4 18/86] KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE
` [PATCH 4.4 19/86] cpufreq: imx6q: add return value check for voltage scale
` [PATCH 4.4 20/86] ARM: make lookup_processor_type() non-__init
` [PATCH 4.4 21/86] SUNRPC: Fix a bogus get/put in generic_key_to_expire()
` [PATCH 4.4 22/86] kdb: Use strscpy with destination buffer size
` [PATCH 4.4 23/86] powerpc/numa: Suppress "VPHN is not supported" messages
` [PATCH 4.4 24/86] tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
` [PATCH 4.4 25/86] of: add helper to lookup compatible child node
` [PATCH 4.4 26/86] NFC: nfcmrvl_uart: fix OF child-node lookup
` [PATCH 4.4 27/86] net: bcmgenet: "
` [PATCH 4.4 28/86] x86/entry: spell EBX register correctly in documentation
` [PATCH 4.4 29/86] x86/entry/64: Remove %ebx handling from error_entry/exit
` [PATCH 4.4 30/86] arm64: remove no-op -p linker flag
` [PATCH 4.4 32/86] Input: xpad - remove spurious events of wireless xpad 360 controller
` [PATCH 4.4 33/86] Input: xpad - handle "present" and "gone" correctly
` [PATCH 4.4 34/86] Input: xpad - update Xbox One Force Feedback Support
` [PATCH 4.4 35/86] Input: xpad - workaround dead irq_out after suspend/ resume
` [PATCH 4.4 36/86] Input: xpad - use LED API when identifying wireless controllers
` [PATCH 4.4 37/86] Input: xpad - correct xbox one pad device name
` [PATCH 4.4 38/86] Input: xpad - remove unused function
` [PATCH 4.4 39/86] Input: xpad - add Mad Catz FightStick TE 2 VID/PID
` [PATCH 4.4 40/86] Input: xpad - prevent spurious input from wired Xbox 360 controllers
` [PATCH 4.4 41/86] Input: xpad - add more third-party controllers
` [PATCH 4.4 42/86] Input: xpad - xbox one elite controller support
` [PATCH 4.4 43/86] Input: xpad - fix rumble on Xbox One controllers with 2015 firmware
` [PATCH 4.4 44/86] Input: xpad - power off wireless 360 controllers on suspend
` [PATCH 4.4 45/86] Input: xpad - add product ID for Xbox One S pad
` [PATCH 4.4 46/86] Input: xpad - fix Xbox One rumble stopping after 2.5 secs
` [PATCH 4.4 47/86] Input: xpad - correctly sort vendor ids
` [PATCH 4.4 48/86] Input: xpad - move reporting xbox one home button to common function
` [PATCH 4.4 49/86] Input: xpad - simplify error condition in init_output
` [PATCH 4.4 50/86] Input: xpad - dont depend on endpoint order
` [PATCH 4.4 51/86] Input: xpad - fix stuck mode button on Xbox One S pad
` [PATCH 4.4 52/86] Input: xpad - restore LED state after device resume
` [PATCH 4.4 53/86] Input: xpad - support some quirky Xbox One pads
` [PATCH 4.4 54/86] Input: xpad - sort supported devices by USB ID
` [PATCH 4.4 55/86] Input: xpad - sync supported devices with xboxdrv
` [PATCH 4.4 56/86] Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth
` [PATCH 4.4 57/86] Input: xpad - sync supported devices with 360Controller
` [PATCH 4.4 58/86] Input: xpad - sync supported devices with XBCD
` [PATCH 4.4 59/86] Input: xpad - constify usb_device_id
` [PATCH 4.4 60/86] Input: xpad - fix PowerA init quirk for some gamepad models
` [PATCH 4.4 61/86] Input: xpad - validate USB endpoint type during probe
` [PATCH 4.4 62/86] Input: xpad - add support for PDP Xbox One controllers
` [PATCH 4.4 63/86] Input: xpad - add PDP device id 0x02a4
` [PATCH 4.4 64/86] Input: xpad - fix some coding style issues
` [PATCH 4.4 65/86] Input: xpad - avoid using __set_bit() for capabilities
` [PATCH 4.4 66/86] Input: xpad - add GPD Win 2 Controller USB IDs
` [PATCH 4.4 67/86] Input: xpad - fix GPD Win 2 controller name
` [PATCH 4.4 68/86] Input: xpad - add support for Xbox1 PDP Camo series gamepad
` [PATCH 4.4 71/86] mwifiex: fix p2p device doesnt find in scan problem

[PATCH 4.9 00/92] 4.9.142-stable review
 2018-11-29 14:12 UTC  (44+ messages)
` [PATCH 4.9 12/92] bfs: add sanity check at bfs_fill_super()
` [PATCH 4.9 22/92] can: dev: __can_get_echo_skb(): Dont crash the kernel if can_priv::echo_skb is accessed out of bounds
` [PATCH 4.9 25/92] IB/core: Fix for core panic
` [PATCH 4.9 27/92] usb: xhci: Prevent bus suspend if a port connect change or polling state is detected
` [PATCH 4.9 28/92] pinctrl: meson: fix pinconf bias disable
` [PATCH 4.9 29/92] KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE
` [PATCH 4.9 30/92] cpufreq: imx6q: add return value check for voltage scale
` [PATCH 4.9 31/92] rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_write
` [PATCH 4.9 32/92] floppy: fix race condition in __floppy_read_block_0()
` [PATCH 4.9 33/92] powerpc/io: Fix the IO workarounds code to work with Radix
` [PATCH 4.9 34/92] perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs
` [PATCH 4.9 35/92] ARM: make lookup_processor_type() non-__init
` [PATCH 4.9 36/92] SUNRPC: Fix a bogus get/put in generic_key_to_expire()
` [PATCH 4.9 37/92] kdb: Use strscpy with destination buffer size
` [PATCH 4.9 38/92] powerpc/numa: Suppress "VPHN is not supported" messages
` [PATCH 4.9 39/92] efi/arm: Revert deferred unmap of early memmap mapping
` [PATCH 4.9 40/92] tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
` [PATCH 4.9 41/92] of: add helper to lookup compatible child node
` [PATCH 4.9 42/92] NFC: nfcmrvl_uart: fix OF child-node lookup
` [PATCH 4.9 43/92] net: bcmgenet: "
` [PATCH 4.9 44/92] arm64: remove no-op -p linker flag
` [PATCH 4.9 46/92] Input: xpad - add product ID for Xbox One S pad
` [PATCH 4.9 47/92] Input: xpad - fix Xbox One rumble stopping after 2.5 secs
` [PATCH 4.9 48/92] Input: xpad - correctly sort vendor ids
` [PATCH 4.9 49/92] Input: xpad - move reporting xbox one home button to common function
` [PATCH 4.9 50/92] Input: xpad - simplify error condition in init_output
` [PATCH 4.9 51/92] Input: xpad - dont depend on endpoint order
` [PATCH 4.9 52/92] Input: xpad - fix stuck mode button on Xbox One S pad
` [PATCH 4.9 53/92] Input: xpad - restore LED state after device resume
` [PATCH 4.9 54/92] Input: xpad - support some quirky Xbox One pads
` [PATCH 4.9 55/92] Input: xpad - sort supported devices by USB ID
` [PATCH 4.9 56/92] Input: xpad - sync supported devices with xboxdrv
` [PATCH 4.9 57/92] Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth
` [PATCH 4.9 58/92] Input: xpad - sync supported devices with 360Controller
` [PATCH 4.9 59/92] Input: xpad - sync supported devices with XBCD
` [PATCH 4.9 60/92] Input: xpad - constify usb_device_id
` [PATCH 4.9 61/92] Input: xpad - fix PowerA init quirk for some gamepad models
` [PATCH 4.9 62/92] Input: xpad - validate USB endpoint type during probe
` [PATCH 4.9 63/92] Input: xpad - add support for PDP Xbox One controllers
` [PATCH 4.9 64/92] Input: xpad - add PDP device id 0x02a4
` [PATCH 4.9 65/92] Input: xpad - fix some coding style issues
` [PATCH 4.9 66/92] Input: xpad - avoid using __set_bit() for capabilities
` [PATCH 4.9 67/92] Input: xpad - add GPD Win 2 Controller USB IDs