[PATCH 1/2] driver core: platform: Initialize dma_parms for platform devices

[PATCH 1/2] driver core: platform: Initialize dma_parms for platform devices

[Ulf Hansson]

It's currently the platform driver's responsibility to initialize the
pointer, dma_parms, for its corresponding struct device. The benefit with
this approach allows us to avoid the initialization and to not waste memory
for the struct device_dma_parameters, as this can be decided on a case by
case basis.

However, it has turned out that this approach is not very practical.  Not
only does it lead to open coding, but also to real errors. In principle
callers of dma_set_max_seg_size() doesn't check the error code, but just
assumes it succeeds.

For these reasons, let's do the initialization from the common platform bus
at the device registration point. This also follows the way the PCI devices
are being managed, see pci_device_add().

Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/base/platform.c         | 1 +
 include/linux/platform_device.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index b5ce7b085795..46abbfb52655 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -512,6 +512,7 @@ int platform_device_add(struct platform_device *pdev)
 		pdev->dev.parent = &platform_bus;
 
 	pdev->dev.bus = &platform_bus_type;
+	pdev->dev.dma_parms = &pdev->dma_parms;
 
 	switch (pdev->id) {
 	default:
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 041bfa412aa0..81900b3cbe37 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -25,6 +25,7 @@ struct platform_device {
 	bool		id_auto;
 	struct device	dev;
 	u64		platform_dma_mask;
+	struct device_dma_parameters dma_parms;
 	u32		num_resources;
 	struct resource	*resource;
 
-- 
2.20.1

Re: [PATCH 1/2] driver core: platform: Initialize dma_parms for platform devices

[Ludovic BARRE]

Le 3/25/20 à 12:34 PM, Ulf Hansson a écrit :
> It's currently the platform driver's responsibility to initialize the
> pointer, dma_parms, for its corresponding struct device. The benefit with
> this approach allows us to avoid the initialization and to not waste memory
> for the struct device_dma_parameters, as this can be decided on a case by
> case basis.
> 
> However, it has turned out that this approach is not very practical.  Not
> only does it lead to open coding, but also to real errors. In principle
> callers of dma_set_max_seg_size() doesn't check the error code, but just
> assumes it succeeds.
> 
> For these reasons, let's do the initialization from the common platform bus
> at the device registration point. This also follows the way the PCI devices
> are being managed, see pci_device_add().

tested with mmc: mmci_sdmmc fix
Tested-by: Ludovic Barre <ludovic.barre@st.com>

> Suggested-by: Christoph Hellwig <hch@lst.de>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---
>   drivers/base/platform.c         | 1 +
>   include/linux/platform_device.h | 1 +
>   2 files changed, 2 insertions(+)
> 
> diff --git a/drivers/base/platform.c b/drivers/base/platform.c
> index b5ce7b085795..46abbfb52655 100644
> --- a/drivers/base/platform.c
> +++ b/drivers/base/platform.c
> @@ -512,6 +512,7 @@ int platform_device_add(struct platform_device *pdev)
>   		pdev->dev.parent = &platform_bus;
>   
>   	pdev->dev.bus = &platform_bus_type;
> +	pdev->dev.dma_parms = &pdev->dma_parms;
>   
>   	switch (pdev->id) {
>   	default:
> diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
> index 041bfa412aa0..81900b3cbe37 100644
> --- a/include/linux/platform_device.h
> +++ b/include/linux/platform_device.h
> @@ -25,6 +25,7 @@ struct platform_device {
>   	bool		id_auto;
>   	struct device	dev;
>   	u64		platform_dma_mask;
> +	struct device_dma_parameters dma_parms;
>   	u32		num_resources;
>   	struct resource	*resource;
>   
> 

Re: [PATCH 1/2] driver core: platform: Initialize dma_parms for platform devices

[Linus Walleij]

On Wed, Mar 25, 2020 at 12:34 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:

> It's currently the platform driver's responsibility to initialize the
> pointer, dma_parms, for its corresponding struct device. The benefit with
> this approach allows us to avoid the initialization and to not waste memory
> for the struct device_dma_parameters, as this can be decided on a case by
> case basis.
>
> However, it has turned out that this approach is not very practical.  Not
> only does it lead to open coding, but also to real errors. In principle
> callers of dma_set_max_seg_size() doesn't check the error code, but just
> assumes it succeeds.
>
> For these reasons, let's do the initialization from the common platform bus
> at the device registration point. This also follows the way the PCI devices
> are being managed, see pci_device_add().
>
> Suggested-by: Christoph Hellwig <hch@lst.de>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

This seems in line with what Christoph said.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

I imagine we can eventually set up more of the DMA config such
as segment size based on config from the device tree, but I'm not
sure about that yet.

Yours,
Linus Walleij

Re: [PATCH 1/2] driver core: platform: Initialize dma_parms for platform devices

[Arnd Bergmann]

On Wed, Mar 25, 2020 at 12:34 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> It's currently the platform driver's responsibility to initialize the
> pointer, dma_parms, for its corresponding struct device. The benefit with
> this approach allows us to avoid the initialization and to not waste memory
> for the struct device_dma_parameters, as this can be decided on a case by
> case basis.
>
> However, it has turned out that this approach is not very practical.  Not
> only does it lead to open coding, but also to real errors. In principle
> callers of dma_set_max_seg_size() doesn't check the error code, but just
> assumes it succeeds.
>
> For these reasons, let's do the initialization from the common platform bus
> at the device registration point. This also follows the way the PCI devices
> are being managed, see pci_device_add().
>
> Suggested-by: Christoph Hellwig <hch@lst.de>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Acked-by: Arnd Bergmann <arnd@arndb.de>

Re: [PATCH 1/2] driver core: platform: Initialize dma_parms for platform devices

[Sasha Levin]

Hi

[This is an automated email]

This commit has been processed because it contains a -stable tag.
The stable tag indicates that it's relevant for the following trees: all

The bot has tested the following trees: v5.5.11, v5.4.27, v4.19.112, v4.14.174, v4.9.217, v4.4.217.

v5.5.11: Build OK!
v5.4.27: Build OK!
v4.19.112: Failed to apply! Possible dependencies:
    cdfee5623290 ("driver core: initialize a default DMA mask for platform device")
    e3a36eb6dfae ("driver code: clarify and fix platform device DMA mask allocation")

v4.14.174: Failed to apply! Possible dependencies:
    186c446f4b84 ("media: arch: sh: migor: Use new renesas-ceu camera driver")
    1a3c230b4151 ("media: arch: sh: ms7724se: Use new renesas-ceu camera driver")
    39fb993038e1 ("media: arch: sh: ap325rxa: Use new renesas-ceu camera driver")
    b12c8a70643f ("m68k: Set default dma mask for platform devices")
    c2f9b05fd5c1 ("media: arch: sh: ecovec: Use new renesas-ceu camera driver")
    cdfee5623290 ("driver core: initialize a default DMA mask for platform device")
    e3a36eb6dfae ("driver code: clarify and fix platform device DMA mask allocation")
    f3590dc32974 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver")

v4.9.217: Failed to apply! Possible dependencies:
    186c446f4b84 ("media: arch: sh: migor: Use new renesas-ceu camera driver")
    1a3c230b4151 ("media: arch: sh: ms7724se: Use new renesas-ceu camera driver")
    39fb993038e1 ("media: arch: sh: ap325rxa: Use new renesas-ceu camera driver")
    8fd708157a59 ("Input: tsc2007 - move header file out of I2C realm")
    b12c8a70643f ("m68k: Set default dma mask for platform devices")
    c2f9b05fd5c1 ("media: arch: sh: ecovec: Use new renesas-ceu camera driver")
    cdfee5623290 ("driver core: initialize a default DMA mask for platform device")
    e3a36eb6dfae ("driver code: clarify and fix platform device DMA mask allocation")
    f14434040ce0 ("Input: tsc2007 - add iio interface to read external ADC input and temperature")
    f3590dc32974 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver")

v4.4.217: Failed to apply! Possible dependencies:
    166dd7d3fbf2 ("powerpc/64: Move MMU backend selection out of platform code")
    340f3039acd6 ("m68k: convert to dma_map_ops")
    3808a88985b4 ("powerpc: Move FW feature probing out of pseries probe()")
    406b0b6ae3fc ("powerpc/64: Move 64-bit probe_machine() to later in the boot process")
    565713840445 ("powerpc: Move 32-bit probe() machine to later in the boot process")
    5d31a96e6c01 ("powerpc/livepatch: Add livepatch stack to struct thread_info")
    63c254a50104 ("powerpc: Add comment explaining the purpose of setup_kdump_trampoline()")
    b12c8a70643f ("m68k: Set default dma mask for platform devices")
    b1923caa6e64 ("powerpc: Merge 32-bit and 64-bit setup_arch()")
    cdfee5623290 ("driver core: initialize a default DMA mask for platform device")
    da6a97bf12d5 ("powerpc: Move epapr_paravirt_early_init() to early_init_devtree()")
    e3a36eb6dfae ("driver code: clarify and fix platform device DMA mask allocation")
    f63e6d898760 ("powerpc/livepatch: Add livepatch header")


NOTE: The patch will not be queued to stable trees until it is upstream.

How should we proceed with this patch?

-- 
Thanks
Sasha

[PATCH 2/2] amba: Initialize dma_parms for amba devices

[Ulf Hansson]

It's currently the amba driver's responsibility to initialize the pointer,
dma_parms, for its corresponding struct device. The benefit with this
approach allows us to avoid the initialization and to not waste memory for
the struct device_dma_parameters, as this can be decided on a case by case
basis.

However, it has turned out that this approach is not very practical. Not
only does it lead to open coding, but also to real errors. In principle
callers of dma_set_max_seg_size() doesn't check the error code, but just
assumes it succeeds.

For these reasons, let's do the initialization from the common amba bus at
the device registration point. This also follows the way the PCI devices
are being managed, see pci_device_add().

Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/amba/bus.c       | 2 ++
 include/linux/amba/bus.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index fe1523664816..5e61783ce92d 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -374,6 +374,8 @@ static int amba_device_try_add(struct amba_device *dev, struct resource *parent)
 	WARN_ON(dev->irq[0] == (unsigned int)-1);
 	WARN_ON(dev->irq[1] == (unsigned int)-1);
 
+	dev->dev.dma_parms = &dev->dma_parms;
+
 	ret = request_resource(parent, &dev->res);
 	if (ret)
 		goto err_out;
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 26f0ecf401ea..0bbfd647f5c6 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -65,6 +65,7 @@ struct amba_device {
 	struct device		dev;
 	struct resource		res;
 	struct clk		*pclk;
+	struct device_dma_parameters dma_parms;
 	unsigned int		periphid;
 	unsigned int		cid;
 	struct amba_cs_uci_id	uci;
-- 
2.20.1

Re: [PATCH 2/2] amba: Initialize dma_parms for amba devices

[Ludovic BARRE]

Le 3/25/20 à 12:34 PM, Ulf Hansson a écrit :
> It's currently the amba driver's responsibility to initialize the pointer,
> dma_parms, for its corresponding struct device. The benefit with this
> approach allows us to avoid the initialization and to not waste memory for
> the struct device_dma_parameters, as this can be decided on a case by case
> basis.
> 
> However, it has turned out that this approach is not very practical. Not
> only does it lead to open coding, but also to real errors. In principle
> callers of dma_set_max_seg_size() doesn't check the error code, but just
> assumes it succeeds.
> 
> For these reasons, let's do the initialization from the common amba bus at
> the device registration point. This also follows the way the PCI devices
> are being managed, see pci_device_add().
> 

tested with mmc: mmci_sdmmc fix
Tested-by: Ludovic Barre <ludovic.barre@st.com>

> Suggested-by: Christoph Hellwig <hch@lst.de>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---
>   drivers/amba/bus.c       | 2 ++
>   include/linux/amba/bus.h | 1 +
>   2 files changed, 3 insertions(+)
> 
> diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
> index fe1523664816..5e61783ce92d 100644
> --- a/drivers/amba/bus.c
> +++ b/drivers/amba/bus.c
> @@ -374,6 +374,8 @@ static int amba_device_try_add(struct amba_device *dev, struct resource *parent)
>   	WARN_ON(dev->irq[0] == (unsigned int)-1);
>   	WARN_ON(dev->irq[1] == (unsigned int)-1);
>   
> +	dev->dev.dma_parms = &dev->dma_parms;
> +
>   	ret = request_resource(parent, &dev->res);
>   	if (ret)
>   		goto err_out;
> diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
> index 26f0ecf401ea..0bbfd647f5c6 100644
> --- a/include/linux/amba/bus.h
> +++ b/include/linux/amba/bus.h
> @@ -65,6 +65,7 @@ struct amba_device {
>   	struct device		dev;
>   	struct resource		res;
>   	struct clk		*pclk;
> +	struct device_dma_parameters dma_parms;
>   	unsigned int		periphid;
>   	unsigned int		cid;
>   	struct amba_cs_uci_id	uci;
> 

Re: [PATCH 2/2] amba: Initialize dma_parms for amba devices

[Linus Walleij]

On Wed, Mar 25, 2020 at 12:34 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:

> It's currently the amba driver's responsibility to initialize the pointer,
> dma_parms, for its corresponding struct device. The benefit with this
> approach allows us to avoid the initialization and to not waste memory for
> the struct device_dma_parameters, as this can be decided on a case by case
> basis.
>
> However, it has turned out that this approach is not very practical. Not
> only does it lead to open coding, but also to real errors. In principle
> callers of dma_set_max_seg_size() doesn't check the error code, but just
> assumes it succeeds.
>
> For these reasons, let's do the initialization from the common amba bus at
> the device registration point. This also follows the way the PCI devices
> are being managed, see pci_device_add().
>
> Suggested-by: Christoph Hellwig <hch@lst.de>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Re: [PATCH 2/2] amba: Initialize dma_parms for amba devices

[Arnd Bergmann]

On Wed, Mar 25, 2020 at 12:34 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> It's currently the amba driver's responsibility to initialize the pointer,
> dma_parms, for its corresponding struct device. The benefit with this
> approach allows us to avoid the initialization and to not waste memory for
> the struct device_dma_parameters, as this can be decided on a case by case
> basis.
>
> However, it has turned out that this approach is not very practical. Not
> only does it lead to open coding, but also to real errors. In principle
> callers of dma_set_max_seg_size() doesn't check the error code, but just
> assumes it succeeds.
>
> For these reasons, let's do the initialization from the common amba bus at
> the device registration point. This also follows the way the PCI devices
> are being managed, see pci_device_add().
>
> Suggested-by: Christoph Hellwig <hch@lst.de>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Acked-by: Arnd Bergmann <arnd@arndb.de>