From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B8973C433FE for ; Wed, 2 Mar 2022 00:01:39 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233984AbiCBACT (ORCPT ); Tue, 1 Mar 2022 19:02:19 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51828 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232206AbiCBACT (ORCPT ); Tue, 1 Mar 2022 19:02:19 -0500 Received: from angie.orcam.me.uk (angie.orcam.me.uk [IPv6:2001:4190:8020::34]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id A24308EB46; Tue, 1 Mar 2022 16:01:33 -0800 (PST) Received: by angie.orcam.me.uk (Postfix, from userid 500) id BE80592009C; Wed, 2 Mar 2022 01:01:32 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by angie.orcam.me.uk (Postfix) with ESMTP id B728192009B; Wed, 2 Mar 2022 00:01:32 +0000 (GMT) Date: Wed, 2 Mar 2022 00:01:32 +0000 (GMT) From: "Maciej W. Rozycki" To: Bjorn Helgaas cc: Bjorn Helgaas , linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org Subject: Re: [RESEND][PATCH v2] PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge In-Reply-To: <20220301231547.GA663097@bhelgaas> Message-ID: References: <20220301231547.GA663097@bhelgaas> User-Agent: Alpine 2.21 (DEB 202 2017-01-01) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Precedence: bulk List-ID: X-Mailing-List: stable@vger.kernel.org On Tue, 1 Mar 2022, Bjorn Helgaas wrote: > > Fix an issue with the Tyan Tomcat IV S1564D system, the BIOS of which > > does not assign PCI buses beyond #2, where our resource reallocation > > code preserves the reset default of an I/O BAR assignment outside its > > upstream PCI-to-PCI bridge's I/O forwarding range for device 06:08.0 in > > this log: > > Would you mind collecting the complete dmesg log before your patch? > It's hard to get the entire picture from snippets. Sure, here's the original log from at the time when I made the patch. I think it's as verbose as you can get; there's no way I could have used it for the change description. Also I doubt it should matter, but if you need a fresh log instead from 5.17, then I can make one too, but that will take a bit. Let me know if you need me to try anything else too. Thanks, Maciej LILO 22.8 boot: bisect Loading bisect........................................................... BIOS data check successful Linux version 5.13.0-rc6-00229-g15279ebe99d7-dirty (macro@angie) (i386-linux-gnu-gcc (GCC) 11.0.0 20200919 (experimental), GNU ld (GNU Binutils) 2.35.50.20201006) #21 SMP Tue Jul 6 14:36:41 CEST 2021 KERNEL supported cpus: Intel GenuineIntel x86/fpu: x87 FPU will use FSAVE BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved Notice: NX (Execute Disable) protection missing in CPU! Legacy DMI 2.0 present. DMI: Tyan Computer Corp i430HX, BIOS 4.51 PG 05/13/98 tsc: Fast TSC calibration using PIT tsc: Detected 232.671 MHz processor e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0x20000 max_arch_pfn = 0x100000 x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC found SMP MP-table at [mem 0x000f5db0-0x000f5dbf] initial memory mapped: [mem 0x00000000-0x00bfffff] 512MB LOWMEM available. mapped low ram: 0 - 20000000 low ram: 0 - 20000000 Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] Normal [mem 0x0000000001000000-0x000000001fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x000000001fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000001fffffff] On node 0 totalpages: 130974 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3998 pages, LIFO batch:0 Normal zone: 992 pages used for memmap Normal zone: 126976 pages, LIFO batch:31 Using APIC driver default Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) BIOS bug: APIC version mismatch, boot CPU: 10, CPU 0: version 11 Processor #1 BIOS bug: APIC version mismatch, boot CPU: 10, CPU 1: version 11 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 Processors: 2 smpboot: Allowing 2 CPUs, 0 hotplug CPUs [mem 0x20000000-0xfebfffff] available for PCI devices clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 percpu: Embedded 27 pages/cpu s88300 r0 d22292 u110592 pcpu-alloc: s88300 r0 d22292 u110592 alloc=27*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists, mobility grouping on. Total pages: 129950 Kernel command line: BOOT_IMAGE=bisect ro root=802 console=tty0 console=ttyS0,9600n8 parport=0x378,7 mce noapic debug panic=60 emergency pci=assign-busses,realloc Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Checking if this processor honours the WP bit even in supervisor mode...Ok. Memory: 510624K/523896K available (5346K kernel code, 578K rwdata, 1208K rodata, 424K init, 272K bss, 13272K reserved, 0K cma-reserved) rcu: Hierarchical RCU implementation. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 2304, nr_irqs: 56, preallocated irqs: 16 Console: colour VGA+ 80x25 printk: console [tty0] enabled printk: console [ttyS0] enabled APIC: Switch to symmetric I/O mode setup Enabling APIC mode: Flat. Using 1 I/O APICs clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6b52767c30, max_idle_ns: 881590452765 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 465.34 BogoMIPS (lpj=2326710) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Intel Pentium with F0 0F bug - workaround enabled. mce: Intel old style machine check architecture supported. mce: Intel old style machine check reporting enabled on CPU#0. Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 Freeing SMP alternatives memory: 24K smpboot: CPU0: Intel Pentium MMX (family: 0x5, model: 0x4, stepping: 0x3) Performance Events: no PMU driver, software events only. rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 mce: Intel old style machine check architecture supported. mce: Intel old style machine check reporting enabled on CPU#1. [Firmware Bug]: CPU1: APIC id mismatch. Firmware: 1 APIC: 0 smp: Brought up 1 node, 2 CPUs smpboot: Max logical packages: 2 smpboot: Total of 2 processors activated (930.79 BogoMIPS) random: get_random_u32 called from bucket_table_alloc.isra.0+0x5b/0x130 with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 2, 16384 bytes, linear) NET: Registered protocol family 16 PCI: Using configuration type 1 for base access SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 8 NET: Registered protocol family 20 PCI: Probing PCI hardware PCI: root bus 00: using default resources PCI: Probing PCI hardware (bus 00) PCI host bridge to bus 0000:00 clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc-early' as unstable because the skew is too large: clocksource: 'refined-jiffies' wd_now: ffff8b39 wd_last: ffff8b07 mask: ffffffff clocksource: 'tsc-early' cs_now: 50fdc058d cs_last: 4ff05ffb9 mask: ffffffffffffffff tsc: Marking TSC unstable due to clocksource watchdog pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci_bus 0000:00: scanning bus pci 0000:00:00.0: [8086:1250] type 00 class 0x060000 pci 0000:00:07.0: [8086:7000] type 00 class 0x060100 pci 0000:00:07.1: [8086:7010] type 00 class 0x010180 pci 0000:00:07.1: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:07.2: [8086:7020] type 00 class 0x0c0300 pci 0000:00:07.2: reg 0x20: [io 0x6000-0x601f] pci 0000:00:11.0: [12d8:e111] type 01 class 0x060400 pci 0000:00:11.0: enabling Extended Tags pci 0000:00:11.0: Enable PCIe Retrain Link quirk pci 0000:00:12.0: [1011:000f] type 00 class 0x020200 pci 0000:00:12.0: reg 0x10: [mem 0xe0010000-0xe001007f] pci 0000:00:12.0: reg 0x14: [io 0x6400-0x647f] pci 0000:00:12.0: reg 0x18: [mem 0xe0000000-0xe000ffff] pci 0000:00:13.0: [104b:1040] type 00 class 0x010000 pci 0000:00:13.0: reg 0x10: [io 0x6800-0x6803] pci 0000:00:13.0: reg 0x14: [mem 0xe0011000-0xe0011fff] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x00007fff pref] pci 0000:00:14.0: [10b7:9200] type 00 class 0x020000 pci 0000:00:14.0: reg 0x10: [io 0x6c00-0x6c7f] pci 0000:00:14.0: reg 0x14: [mem 0xe0012000-0xe001207f] pci 0000:00:14.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] pci 0000:00:14.0: supports D1 D2 pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: PME# disabled pci_bus 0000:00: fixups for bus pci 0000:00:11.0: scanning [bus 01-01] behind bridge, pass 0 pci 0000:00:11.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:01: extended config space not accessible pci_bus 0000:01: scanning bus pci 0000:01:00.0: [104c:8232] type 01 class 0x060400 pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:00.0: PME# disabled pci_bus 0000:01: fixups for bus pci 0000:00:11.0: PCI bridge to [bus 01-ff] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] pci 0000:00:11.0: bridge window [mem 0xd8000000-0xdfffffff] pci 0000:00:11.0: bridge window [mem 0xa8000000-0xafffffff 64bit pref] pci 0000:01:00.0: scanning [bus 00-00] behind bridge, pass 0 pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:01:00.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:02: extended config space not accessible pci_bus 0000:02: scanning bus pci 0000:02:00.0: [104c:8233] type 01 class 0x060400 pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:01.0: [104c:8233] type 01 class 0x060400 pci 0000:02:01.0: supports D1 D2 pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:02.0: [104c:8233] type 01 class 0x060400 pci 0000:02:02.0: supports D1 D2 pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:02.0: PME# disabled pci_bus 0000:02: fixups for bus pci 0000:01:00.0: PCI bridge to [bus 02-ff] pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] pci 0000:01:00.0: bridge window [mem 0x00000000-0x000fffff] pci 0000:01:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] pci 0000:02:00.0: scanning [bus 00-00] behind bridge, pass 0 pci 0000:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:02:01.0: scanning [bus 00-00] behind bridge, pass 0 pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 0 pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:02:00.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:03: extended config space not accessible pci_bus 0000:03: scanning bus pci_bus 0000:03: fixups for bus pci 0000:02:00.0: PCI bridge to [bus 03-ff] pci 0000:02:00.0: bridge window [io 0x0000-0x0fff] pci 0000:02:00.0: bridge window [mem 0x00000000-0x000fffff] pci 0000:02:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] pci_bus 0000:03: bus scan returning with max=03 pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03 pci 0000:02:01.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:04: extended config space not accessible pci_bus 0000:04: scanning bus pci 0000:04:00.0: [1415:c118] type 00 class 0x070102 pci 0000:04:00.0: reg 0x10: [io 0x0000-0x0007] pci 0000:04:00.0: reg 0x14: [io 0x0000-0x0003] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.3: [1415:c11b] type 00 class 0x070002 pci 0000:04:00.3: reg 0x10: [mem 0x00000000-0x00003fff] pci 0000:04:00.3: reg 0x14: [mem 0x00000000-0x001fffff] pci 0000:04:00.3: reg 0x18: [mem 0x00000000-0x001fffff] pci 0000:04:00.3: supports D1 D2 pci 0000:04:00.3: PME# supported from D1 D2 D3hot D3cold pci 0000:04:00.3: PME# disabled pci_bus 0000:04: fixups for bus pci 0000:02:01.0: PCI bridge to [bus 04-ff] pci 0000:02:01.0: bridge window [io 0x0000-0x0fff] pci 0000:02:01.0: bridge window [mem 0x00000000-0x000fffff] pci 0000:02:01.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] pci_bus 0000:04: bus scan returning with max=04 pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04 pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:05: extended config space not accessible pci_bus 0000:05: scanning bus pci 0000:05:00.0: [104c:8231] type 01 class 0x060400 pci 0000:05:00.0: supports D1 D2 pci_bus 0000:05: fixups for bus pci 0000:02:02.0: PCI bridge to [bus 05-ff] pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] pci 0000:02:02.0: bridge window [mem 0x00000000-0x000fffff] pci 0000:02:02.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] pci 0000:05:00.0: scanning [bus 00-00] behind bridge, pass 0 pci 0000:05:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:05:00.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:06: extended config space not accessible pci_bus 0000:06: scanning bus pci 0000:06:05.0: [111a:0002] type 00 class 0x020300 pci 0000:06:05.0: reg 0x10: [mem 0x00000000-0x003fffff] pci 0000:06:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] pci 0000:06:08.0: [1106:3038] type 00 class 0x0c0300 pci 0000:06:08.0: reg 0x20: [io 0xfce0-0xfcff] pci 0000:06:08.0: supports D1 D2 pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot pci 0000:06:08.0: PME# disabled pci 0000:06:08.1: [1106:3038] type 00 class 0x0c0300 pci 0000:06:08.1: reg 0x20: [io 0xfce0-0xfcff] pci 0000:06:08.1: supports D1 D2 pci 0000:06:08.1: PME# supported from D0 D1 D2 D3hot pci 0000:06:08.1: PME# disabled pci 0000:06:08.2: [1106:3104] type 00 class 0x0c0320 pci 0000:06:08.2: reg 0x10: [mem 0x00000000-0x000000ff] pci 0000:06:08.2: supports D1 D2 pci 0000:06:08.2: PME# supported from D0 D1 D2 D3hot pci 0000:06:08.2: PME# disabled pci_bus 0000:06: fixups for bus pci 0000:05:00.0: PCI bridge to [bus 06-ff] pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] pci 0000:05:00.0: bridge window [mem 0x00000000-0x000fffff] pci 0000:05:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] pci_bus 0000:06: bus scan returning with max=06 pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06 pci_bus 0000:05: bus scan returning with max=06 pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 06 pci_bus 0000:02: bus scan returning with max=06 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 06 pci_bus 0000:01: bus scan returning with max=06 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 06 pci_bus 0000:00: bus scan returning with max=06 pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 06 PCI: IRQ init PCI: Interrupt Routing Table found at 0xfde10 00:14.0 slot=01 0:60/deb8 1:61/deb8 2:62/deb8 3:63/deb8 00:13.0 slot=02 0:61/deb8 1:62/deb8 2:63/deb8 3:60/deb8 00:12.0 slot=03 0:62/deb8 1:63/deb8 2:60/deb8 3:61/deb8 00:11.0 slot=04 0:63/deb8 1:60/deb8 2:61/deb8 3:62/deb8 00:07.1 slot=00 0:00/deb8 1:00/deb8 2:00/deb8 3:00/deb8 00:07.2 slot=00 0:00/deb8 1:00/deb8 2:00/deb8 3:63/deb8 PCI: Attempting to find IRQ router for [8086:7000] PCI: Trying IRQ router for [8086:7000] pci 0000:00:07.0: SIO/PIIX/ICH IRQ router [8086:7000] PCI: IRQ fixup pci 0000:02:00.0: ignoring bogus IRQ 255 pci 0000:02:01.0: ignoring bogus IRQ 255 pci 0000:02:02.0: ignoring bogus IRQ 255 pci 0000:04:00.0: ignoring bogus IRQ 255 pci 0000:04:00.3: ignoring bogus IRQ 255 pci 0000:00:11.0: PCI INT A -> PIRQ 63, mask deb8, excl 0c20 pci 0000:00:11.0: PCI INT A -> newirq 0 PCI: setting IRQ 11 as level-triggered pci 0000:00:11.0: found PCI INT A -> IRQ 11 pci 0000:00:11.0: sharing IRQ 11 with 0000:00:07.2 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:00:11.0: sharing IRQ 11 with 0000:02:00.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:00:11.0: sharing IRQ 11 with 0000:04:00.3 pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:00:11.0: sharing IRQ 11 with 0000:06:08.2 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:02:01.0: PCI INT A -> PIRQ 60, mask deb8, excl 0c20 pci 0000:02:01.0: PCI INT A -> newirq 0 PCI: setting IRQ 10 as level-triggered pci 0000:02:01.0: found PCI INT A -> IRQ 10 pci 0000:02:01.0: sharing IRQ 10 with 0000:00:14.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:02:01.0: sharing IRQ 10 with 0000:04:00.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:02:02.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20 pci 0000:02:02.0: PCI INT A -> newirq 0 PCI: setting IRQ 5 as level-triggered pci 0000:02:02.0: found PCI INT A -> IRQ 5 pci 0000:02:02.0: sharing IRQ 5 with 0000:00:13.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:02:02.0: sharing IRQ 5 with 0000:06:08.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:06:05.0: PCI INT A -> PIRQ 62, mask deb8, excl 0c20 pci 0000:06:05.0: PCI INT A -> newirq 0 pci 0000:06:05.0: found PCI INT A -> IRQ 5 pci 0000:06:05.0: sharing IRQ 5 with 0000:00:12.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:06:05.0: sharing IRQ 5 with 0000:06:08.1 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A PCI: pci_cache_line_size set to 32 bytes PCI: Allocating resources pci 0000:00:07.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) pci 0000:00:07.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) pci 0000:00:07.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) pci 0000:00:07.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) pci 0000:00:07.1: BAR 4: reserving [io 0xf000-0xf00f flags 0x40101] (d=0, p=0) pci 0000:00:07.2: BAR 4: reserving [io 0x6000-0x601f flags 0x40101] (d=0, p=0) pci 0000:00:12.0: BAR 0: reserving [mem 0xe0010000-0xe001007f flags 0x40200] (d=0, p=0) pci 0000:00:12.0: BAR 1: reserving [io 0x6400-0x647f flags 0x40101] (d=0, p=0) pci 0000:00:12.0: BAR 2: reserving [mem 0xe0000000-0xe000ffff flags 0x40200] (d=0, p=0) pci 0000:00:13.0: BAR 0: reserving [io 0x6800-0x6803 flags 0x40101] (d=0, p=0) pci 0000:00:13.0: BAR 1: reserving [mem 0xe0011000-0xe0011fff flags 0x40200] (d=0, p=0) pci 0000:00:14.0: BAR 0: reserving [io 0x6c00-0x6c7f flags 0x40101] (d=0, p=0) pci 0000:00:14.0: BAR 1: reserving [mem 0xe0012000-0xe001207f flags 0x40200] (d=0, p=0) pci 0000:06:08.0: BAR 4: reserving [io 0xfce0-0xfcff flags 0x40101] (d=1, p=1) pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window pci 0000:06:08.1: BAR 4: reserving [io 0xfce0-0xfcff flags 0x40101] (d=1, p=1) pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] clocksource: Switched to clocksource refined-jiffies NET: Registered protocol family 2 IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci_bus 0000:00: max bus depth: 4 pci_try_num: 5 pci 0000:00:14.0: BAR 6: assigned [mem 0x20000000-0x2001ffff pref] pci 0000:00:13.0: BAR 6: assigned [mem 0x20020000-0x20027fff pref] pci 0000:01:00.0: BAR 8: assigned [mem 0xd8000000-0xd8bfffff] pci 0000:01:00.0: BAR 7: no space for [io size 0x2000] pci 0000:01:00.0: BAR 7: failed to assign [io size 0x2000] pci 0000:02:02.0: BAR 8: assigned [mem 0xd8000000-0xd85fffff] pci 0000:02:01.0: BAR 8: assigned [mem 0xd8600000-0xd8afffff] pci 0000:02:01.0: BAR 7: no space for [io size 0x1000] pci 0000:02:01.0: BAR 7: failed to assign [io size 0x1000] pci 0000:02:02.0: BAR 7: no space for [io size 0x1000] pci 0000:02:02.0: BAR 7: failed to assign [io size 0x1000] pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:04:00.3: BAR 1: assigned [mem 0xd8600000-0xd87fffff] pci 0000:04:00.3: BAR 2: assigned [mem 0xd8800000-0xd89fffff] pci 0000:04:00.3: BAR 0: assigned [mem 0xd8a00000-0xd8a03fff] pci 0000:04:00.0: BAR 0: no space for [io size 0x0008] pci 0000:04:00.0: BAR 0: failed to assign [io size 0x0008] pci 0000:04:00.0: BAR 1: no space for [io size 0x0004] pci 0000:04:00.0: BAR 1: failed to assign [io size 0x0004] pci 0000:02:01.0: PCI bridge to [bus 04] pci 0000:02:01.0: bridge window [mem 0xd8600000-0xd8afffff] pci 0000:05:00.0: BAR 8: assigned [mem 0xd8000000-0xd85fffff] pci 0000:05:00.0: BAR 7: no space for [io size 0x1000] pci 0000:05:00.0: BAR 7: failed to assign [io size 0x1000] pci 0000:06:05.0: BAR 0: assigned [mem 0xd8000000-0xd83fffff] pci 0000:06:05.0: BAR 6: assigned [mem 0xd8400000-0xd841ffff pref] pci 0000:06:08.2: BAR 0: assigned [mem 0xd8420000-0xd84200ff] pci 0000:06:08.0: BAR 4: no space for [io size 0x0020] pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff] pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: no space for [io size 0x0020] pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: failed to assign [io size 0x0020] pci 0000:05:00.0: PCI bridge to [bus 06] pci 0000:05:00.0: bridge window [mem 0xd8000000-0xd85fffff] pci 0000:02:02.0: PCI bridge to [bus 05-06] pci 0000:02:02.0: bridge window [mem 0xd8000000-0xd85fffff] pci 0000:01:00.0: PCI bridge to [bus 02-06] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd8bfffff] pci 0000:00:11.0: PCI bridge to [bus 01-06] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] pci 0000:00:11.0: bridge window [mem 0xd8000000-0xdfffffff] pci 0000:00:11.0: bridge window [mem 0xa8000000-0xafffffff 64bit pref] pci_bus 0000:00: No. 2 try to assign unassigned res pci 0000:01:00.0: BAR 7: no space for [io size 0x2000] pci 0000:01:00.0: BAR 7: failed to assign [io size 0x2000] pci 0000:02:01.0: BAR 7: no space for [io size 0x1000] pci 0000:02:01.0: BAR 7: failed to assign [io size 0x1000] pci 0000:02:02.0: BAR 7: no space for [io size 0x1000] pci 0000:02:02.0: BAR 7: failed to assign [io size 0x1000] pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:04:00.0: BAR 0: no space for [io size 0x0008] pci 0000:04:00.0: BAR 0: failed to assign [io size 0x0008] pci 0000:04:00.0: BAR 1: no space for [io size 0x0004] pci 0000:04:00.0: BAR 1: failed to assign [io size 0x0004] pci 0000:02:01.0: PCI bridge to [bus 04] pci 0000:02:01.0: bridge window [mem 0xd8600000-0xd8afffff] pci 0000:05:00.0: BAR 7: no space for [io size 0x1000] pci 0000:05:00.0: BAR 7: failed to assign [io size 0x1000] pci 0000:06:08.1: BAR 4: no space for [io size 0x0020] pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: failed to assign [io size 0x0020] pci 0000:05:00.0: PCI bridge to [bus 06] pci 0000:05:00.0: bridge window [mem 0xd8000000-0xd85fffff] pci 0000:02:02.0: PCI bridge to [bus 05-06] pci 0000:02:02.0: bridge window [mem 0xd8000000-0xd85fffff] pci 0000:01:00.0: PCI bridge to [bus 02-06] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd8bfffff] pci 0000:00:11.0: PCI bridge to [bus 01-06] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] pci 0000:00:11.0: bridge window [mem 0xd8000000-0xdfffffff] pci 0000:00:11.0: bridge window [mem 0xa8000000-0xafffffff 64bit pref] pci_bus 0000:00: No. 3 try to assign unassigned res pci 0000:00:11.0: resource 7 [io 0xe000-0xefff] released pci 0000:00:11.0: PCI bridge to [bus 01-06] pci 0000:00:11.0: BAR 7: assigned [io 0x1000-0x2fff] pci 0000:01:00.0: BAR 7: assigned [io 0x1000-0x2fff] pci 0000:02:01.0: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:02:02.0: BAR 7: assigned [io 0x2000-0x2fff] pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:04:00.0: BAR 0: assigned [io 0x1000-0x1007] pci 0000:04:00.0: BAR 1: assigned [io 0x1008-0x100b] pci 0000:02:01.0: PCI bridge to [bus 04] pci 0000:02:01.0: bridge window [io 0x1000-0x1fff] pci 0000:02:01.0: bridge window [mem 0xd8600000-0xd8afffff] pci 0000:05:00.0: BAR 7: assigned [io 0x2000-0x2fff] pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f] pci 0000:05:00.0: PCI bridge to [bus 06] pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] pci 0000:05:00.0: bridge window [mem 0xd8000000-0xd85fffff] pci 0000:02:02.0: PCI bridge to [bus 05-06] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] pci 0000:02:02.0: bridge window [mem 0xd8000000-0xd85fffff] pci 0000:01:00.0: PCI bridge to [bus 02-06] pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd8bfffff] pci 0000:00:11.0: PCI bridge to [bus 01-06] pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] pci 0000:00:11.0: bridge window [mem 0xd8000000-0xdfffffff] pci 0000:00:11.0: bridge window [mem 0xa8000000-0xafffffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0x1000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xdfffffff] pci_bus 0000:01: resource 2 [mem 0xa8000000-0xafffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x1000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xd8000000-0xd8bfffff] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] pci_bus 0000:04: resource 1 [mem 0xd8600000-0xd8afffff] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] pci_bus 0000:05: resource 1 [mem 0xd8000000-0xd85fffff] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] pci_bus 0000:06: resource 1 [mem 0xd8000000-0xd85fffff] pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:07.0: Activating ISA DMA hang workarounds pci 0000:00:07.2: PCI INT D -> PIRQ 63, mask deb8, excl 0c20 pci 0000:00:07.2: PCI INT D -> newirq 11 pci 0000:00:07.2: found PCI INT D -> IRQ 11 pci 0000:00:07.2: sharing IRQ 11 with 0000:00:11.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:00:07.2: sharing IRQ 11 with 0000:02:00.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:00:07.2: sharing IRQ 11 with 0000:04:00.3 pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:00:07.2: sharing IRQ 11 with 0000:06:08.2 pci 0000:00:07.2: quirk_usb_early_handoff+0x0/0x6c0 took 156250 usecs pci 0000:05:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled pci 0000:00:11.0: PCI INT A -> PIRQ 63, mask deb8, excl 0c20 pci 0000:00:11.0: PCI INT A -> newirq 11 pci 0000:00:11.0: found PCI INT A -> IRQ 11 pci 0000:00:11.0: sharing IRQ 11 with 0000:00:07.2 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:00:11.0: sharing IRQ 11 with 0000:02:00.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:00:11.0: sharing IRQ 11 with 0000:04:00.3 pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:00:11.0: sharing IRQ 11 with 0000:06:08.2 pci 0000:01:00.0: enabling device (0000 -> 0003) pci 0000:01:00.0: enabling bus mastering pci 0000:02:02.0: enabling device (0000 -> 0003) pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:02:02.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20 pci 0000:02:02.0: PCI INT A -> newirq 5 pci 0000:02:02.0: found PCI INT A -> IRQ 5 pci 0000:02:02.0: sharing IRQ 5 with 0000:00:13.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:02:02.0: sharing IRQ 5 with 0000:06:08.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:02:02.0: enabling bus mastering pci 0000:05:00.0: enabling device (0000 -> 0003) pci 0000:05:00.0: enabling bus mastering pci 0000:06:08.0: enabling device (0000 -> 0001) pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:06:08.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20 pci 0000:06:08.0: PCI INT A -> newirq 5 pci 0000:06:08.0: found PCI INT A -> IRQ 5 pci 0000:06:08.0: sharing IRQ 5 with 0000:00:13.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:06:08.0: sharing IRQ 5 with 0000:02:02.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:06:08.0: HCRESET not completed yet! pci 0000:06:08.0: quirk_usb_early_handoff+0x0/0x6c0 took 537109 usecs pci 0000:06:08.1: enabling device (0000 -> 0001) pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:06:08.1: PCI INT B -> PIRQ 62, mask deb8, excl 0c20 pci 0000:06:08.1: PCI INT B -> newirq 5 pci 0000:06:08.1: found PCI INT B -> IRQ 5 pci 0000:06:08.1: sharing IRQ 5 with 0000:00:12.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:06:08.1: sharing IRQ 5 with 0000:06:05.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:06:08.1: quirk_usb_early_handoff+0x0/0x6c0 took 156250 usecs pci 0000:06:08.2: enabling device (0000 -> 0002) pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:06:08.2: PCI INT C -> PIRQ 63, mask deb8, excl 0c20 pci 0000:06:08.2: PCI INT C -> newirq 11 pci 0000:06:08.2: found PCI INT C -> IRQ 11 pci 0000:06:08.2: sharing IRQ 11 with 0000:00:07.2 pci 0000:06:08.2: sharing IRQ 11 with 0000:00:11.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:06:08.2: sharing IRQ 11 with 0000:02:00.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:06:08.2: sharing IRQ 11 with 0000:04:00.3 pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:06:08.2: quirk_usb_early_handoff+0x0/0x6c0 took 175781 usecs PCI: CLS 32 bytes, default 32 platform rtc_cmos: registered platform RTC device (no PNP device found) workingset: timestamp_bits=30 max_order=17 bucket_order=0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). test_div64: Starting 64bit/32bit division and modulo test test_div64: Completed 64bit/32bit division and modulo test, 0.070000000s elapsed Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial 0000:04:00.3: runtime IRQ mapping not provided by arch pci 0000:02:01.0: enabling device (0000 -> 0003) pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:02:01.0: PCI INT A -> PIRQ 60, mask deb8, excl 0c20 pci 0000:02:01.0: PCI INT A -> newirq 10 pci 0000:02:01.0: found PCI INT A -> IRQ 10 pci 0000:02:01.0: sharing IRQ 10 with 0000:00:14.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:02:01.0: sharing IRQ 10 with 0000:04:00.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:02:01.0: enabling bus mastering serial 0000:04:00.3: enabling device (0000 -> 0002) pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A serial 0000:04:00.3: PCI INT D -> PIRQ 63, mask deb8, excl 0c20 serial 0000:04:00.3: PCI INT D -> newirq 11 serial 0000:04:00.3: found PCI INT D -> IRQ 11 serial 0000:04:00.3: sharing IRQ 11 with 0000:00:07.2 serial 0000:04:00.3: sharing IRQ 11 with 0000:00:11.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A serial 0000:04:00.3: sharing IRQ 11 with 0000:02:00.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A serial 0000:04:00.3: sharing IRQ 11 with 0000:06:08.2 serial 0000:04:00.3: saving config space at offset 0x0 (reading 0xc11b1415) serial 0000:04:00.3: saving config space at offset 0x4 (reading 0x100002) serial 0000:04:00.3: saving config space at offset 0x8 (reading 0x7000200) serial 0000:04:00.3: saving config space at offset 0xc (reading 0x800000) serial 0000:04:00.3: saving config space at offset 0x10 (reading 0xd8a00000) serial 0000:04:00.3: saving config space at offset 0x14 (reading 0xd8600000) serial 0000:04:00.3: saving config space at offset 0x18 (reading 0xd8800000) serial 0000:04:00.3: saving config space at offset 0x1c (reading 0x0) serial 0000:04:00.3: saving config space at offset 0x20 (reading 0x0) serial 0000:04:00.3: saving config space at offset 0x24 (reading 0x0) serial 0000:04:00.3: saving config space at offset 0x28 (reading 0x0) serial 0000:04:00.3: saving config space at offset 0x2c (reading 0xc11b1415) serial 0000:04:00.3: saving config space at offset 0x30 (reading 0x0) serial 0000:04:00.3: saving config space at offset 0x34 (reading 0x40) serial 0000:04:00.3: saving config space at offset 0x38 (reading 0x0) serial 0000:04:00.3: saving config space at offset 0x3c (reading 0x4ff) serial 0000:04:00.3: detected caps 00000700 should be 00000500 0000:04:00.3: ttyS2 at MMIO 0xd8a01000 (irq = 11, base_baud = 15625000) is a 16C950/954 lp: driver loaded but no devices found Non-volatile memory driver v1.3 ppdev: user-space parallel port driver parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M loop: module loaded Uniform Multi-Platform E-IDE driver pci 0000:00:07.1: runtime IRQ mapping not provided by arch piix 0000:00:07.1: IDE controller (0x8086:0x7010 rev 0x00) FDC 0 is a post-1991 82077 piix 0000:00:07.1: not 100% native mode: will probe irqs later legacy IDE will be removed in 2021, please switch to libata Report any missing HW support to linux-ide@vger.kernel.org ide0: BM-DMA at 0xf000-0xf007 ide1: BM-DMA at 0xf008-0xf00f Probing IDE interface ide0... hda: Maxtor 7245 AT, ATA DISK drive hda: is on PIO blacklist hda: host max PIO4 wanted PIO255(auto-tune) selected PIO1 hda: SWDMA2 mode selected Probing IDE interface ide1... hdc: MEMOREX CD-MAXX52, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 PIIX_IDE 0000:00:07.1: runtime IRQ mapping not provided by arch ide-gd driver 1.18 hda: max request size: 128KiB hda: 479632 sectors (245 MB) w/64KiB Cache, CHS=967/16/31 hda: hda1 hda2 ide-cd driver 5.00 ide-cd: hdc: ATAPI 52X CD-ROM drive, 128kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 pci 0000:00:13.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20 pci 0000:00:13.0: PCI INT A -> newirq 5 pci 0000:00:13.0: found PCI INT A -> IRQ 5 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:00:13.0: sharing IRQ 5 with 0000:02:02.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:00:13.0: sharing IRQ 5 with 0000:06:08.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter scsi0: Firmware Version: 5.07B, I/O Address: 0x6800, IRQ Channel: 5/Level scsi0: PCI Bus: 0, Device: 19, Address: 0xE0011000, Host Adapter SCSI ID: 7 scsi0: Parity Checking: Enabled, Extended Translation: Enabled scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211 scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192 scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 scsi0: SCSI Bus Termination: Both Disabled, SCAM: Disabled scsi0: *** BusLogic BT-958 Initialized Successfully *** scsi host0: BusLogic BT-958 scsi 0:0:0:0: Direct-Access IBM DDYS-T18350M SA5A PQ: 0 ANSI: 3 scsi 0:0:1:0: Direct-Access SEAGATE ST336607LW 0006 PQ: 0 ANSI: 3 scsi 0:0:4:0: Sequential-Access HP C5683A C908 PQ: 0 ANSI: 2 scsi 0:0:5:0: Direct-Access IOMEGA ZIP 100 E.08 PQ: 0 ANSI: 2 st: Version 20160209, fixed bufsize 32768, s/g segs 256 st 0:0:4:0: Attached scsi tape st0 st 0:0:4:0: st0: try direct i/o: yes (alignment 4 B) scsi 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 35843670 512-byte logical blocks: (18.4 GB/17.1 GiB) scsi 0:0:1:0: Attached scsi generic sg1 type 0 sd 0:0:0:0: [sda] Write Protect is off st 0:0:4:0: Attached scsi generic sg2 type 1 sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 scsi 0:0:5:0: Attached scsi generic sg3 type 0 sd 0:0:1:0: [sdb] 71687372 512-byte logical blocks: (36.7 GB/34.2 GiB) sd 0:0:1:0: [sdb] Write Protect is off 3c59x 0000:00:14.0: runtime IRQ mapping not provided by arch sd 0:0:1:0: [sdb] Mode Sense: ab 00 10 08 3c59x 0000:00:14.0: PCI INT A -> PIRQ 60, mask deb8, excl 0c20 sd 0:0:5:0: [sdc] Attached SCSI removable disk 3c59x 0000:00:14.0: PCI INT A -> newirq 10 3c59x 0000:00:14.0: found PCI INT A -> IRQ 10 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 3c59x 0000:00:14.0: sharing IRQ 10 with 0000:02:01.0 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B sdb: sdb1 sdb2 3c59x 0000:00:14.0: sharing IRQ 10 with 0000:04:00.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C sd 0:0:1:0: [sdb] Attached SCSI disk pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > 3c59x: Donald Becker and others. sd 0:0:0:0: [sda] Attached SCSI disk 0000:00:14.0: 3Com PCI 3c905C Tornado at (ptrval). 3c59x 0000:00:14.0: saving config space at offset 0x0 (reading 0x920010b7) 3c59x 0000:00:14.0: saving config space at offset 0x4 (reading 0x2100007) 3c59x 0000:00:14.0: saving config space at offset 0x8 (reading 0x2000074) 3c59x 0000:00:14.0: saving config space at offset 0xc (reading 0x4008) 3c59x 0000:00:14.0: saving config space at offset 0x10 (reading 0x6c01) 3c59x 0000:00:14.0: saving config space at offset 0x14 (reading 0xe0012000) 3c59x 0000:00:14.0: saving config space at offset 0x18 (reading 0x0) 3c59x 0000:00:14.0: saving config space at offset 0x1c (reading 0x0) 3c59x 0000:00:14.0: saving config space at offset 0x20 (reading 0x0) 3c59x 0000:00:14.0: saving config space at offset 0x24 (reading 0x0) 3c59x 0000:00:14.0: saving config space at offset 0x28 (reading 0x0) 3c59x 0000:00:14.0: saving config space at offset 0x2c (reading 0x100010b7) 3c59x 0000:00:14.0: saving config space at offset 0x30 (reading 0x0) 3c59x 0000:00:14.0: saving config space at offset 0x34 (reading 0xdc) 3c59x 0000:00:14.0: saving config space at offset 0x38 (reading 0x0) 3c59x 0000:00:14.0: saving config space at offset 0x3c (reading 0xa0a010a) defxx 0000:00:12.0: runtime IRQ mapping not provided by arch defxx: v1.12 2021/03/10 Lawrence V. Stefani and others defxx 0000:00:12.0: PCI INT A -> PIRQ 62, mask deb8, excl 0c20 defxx 0000:00:12.0: PCI INT A -> newirq 5 defxx 0000:00:12.0: found PCI INT A -> IRQ 5 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D defxx 0000:00:12.0: sharing IRQ 5 with 0000:06:05.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D defxx 0000:00:12.0: sharing IRQ 5 with 0000:06:08.1 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A 0000:00:12.0: DEFPA at MMIO addr = 0xe0010000, IRQ = 5, Hardware addr = 00-00-f8-e7-82-24 0000:00:12.0: registered as fddi0 eni 0000:06:05.0: runtime IRQ mapping not provided by arch eni 0000:06:05.0: enabling device (0000 -> 0002) pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D eni 0000:06:05.0: PCI INT A -> PIRQ 62, mask deb8, excl 0c20 eni 0000:06:05.0: PCI INT A -> newirq 5 eni 0000:06:05.0: found PCI INT A -> IRQ 5 eni 0000:06:05.0: sharing IRQ 5 with 0000:00:12.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D eni 0000:06:05.0: sharing IRQ 5 with 0000:06:08.1 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A eni(itf 0): rev.0,base=0xd8000000,irq=5, mem=2048kB ( 00 -20 -EA -00 -7A -04 ) eni(itf 0): ASIC,MMF eni 0000:06:05.0: enabling bus mastering eni(itf 0): no signal ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:06:08.2: runtime IRQ mapping not provided by arch pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A ehci-pci 0000:06:08.2: PCI INT C -> PIRQ 63, mask deb8, excl 0c20 ehci-pci 0000:06:08.2: PCI INT C -> newirq 11 ehci-pci 0000:06:08.2: found PCI INT C -> IRQ 11 ehci-pci 0000:06:08.2: sharing IRQ 11 with 0000:00:07.2 ehci-pci 0000:06:08.2: sharing IRQ 11 with 0000:00:11.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A ehci-pci 0000:06:08.2: sharing IRQ 11 with 0000:02:00.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A ehci-pci 0000:06:08.2: sharing IRQ 11 with 0000:04:00.3 pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A ehci-pci 0000:06:08.2: enabling bus mastering ehci-pci 0000:06:08.2: EHCI Host Controller ehci-pci 0000:06:08.2: new USB bus registered, assigned bus number 1 ehci-pci 0000:06:08.2: enabling Mem-Wr-Inval ehci-pci 0000:06:08.2: irq 11, io mem 0xd8420000 ehci-pci 0000:06:08.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 5.13.0-rc6-00229-g15279ebe99d7-dirty ehci_hcd usb usb1: SerialNumber: 0000:06:08.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:07.2: runtime IRQ mapping not provided by arch uhci_hcd 0000:00:07.2: PCI INT D -> PIRQ 63, mask deb8, excl 0c20 uhci_hcd 0000:00:07.2: PCI INT D -> newirq 11 uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11 uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:00:11.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:02:00.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:04:00.3 pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:06:08.2 uhci_hcd 0000:00:07.2: enabling bus mastering uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.2: irq 11, io base 0x00006000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 5.13.0-rc6-00229-g15279ebe99d7-dirty uhci_hcd usb usb2: SerialNumber: 0000:00:07.2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:06:08.0: runtime IRQ mapping not provided by arch pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C uhci_hcd 0000:06:08.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20 uhci_hcd 0000:06:08.0: PCI INT A -> newirq 5 uhci_hcd 0000:06:08.0: found PCI INT A -> IRQ 5 uhci_hcd 0000:06:08.0: sharing IRQ 5 with 0000:00:13.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C uhci_hcd 0000:06:08.0: sharing IRQ 5 with 0000:02:02.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A uhci_hcd 0000:06:08.0: enabling bus mastering uhci_hcd 0000:06:08.0: UHCI Host Controller uhci_hcd 0000:06:08.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:06:08.0: HCRESET not completed yet! uhci_hcd 0000:06:08.0: irq 5, io base 0x0000fce0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 5.13.0-rc6-00229-g15279ebe99d7-dirty uhci_hcd usb usb3: SerialNumber: 0000:06:08.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19) uhci_hcd 0000:06:08.1: runtime IRQ mapping not provided by arch pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D uhci_hcd 0000:06:08.1: PCI INT B -> PIRQ 62, mask deb8, excl 0c20 uhci_hcd 0000:06:08.1: PCI INT B -> newirq 5 uhci_hcd 0000:06:08.1: found PCI INT B -> IRQ 5 uhci_hcd 0000:06:08.1: sharing IRQ 5 with 0000:00:12.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D uhci_hcd 0000:06:08.1: sharing IRQ 5 with 0000:06:05.0 pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A uhci_hcd 0000:06:08.1: enabling bus mastering uhci_hcd 0000:06:08.1: UHCI Host Controller uhci_hcd 0000:06:08.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:06:08.1: irq 5, io base 0x00002000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 5.13.0-rc6-00229-g15279ebe99d7-dirty uhci_hcd usb usb4: SerialNumber: 0000:06:08.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice NET: Registered protocol family 10 Segment Routing with IPv6 NET: Registered protocol family 17 lec:lane_module_init: lec.c: initialized mpoa:atm_mpoa_init: mpc.c: initialized mce: Unable to init MCE device (rc: -5) IPI shorthand broadcast: enabled input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! EXT4-fs (sda2): mounted filesystem without journal. Opts: (null). Quota mode: disabled. VFS: Mounted root (ext2 filesystem) readonly on device 8:2. Freeing unused kernel image (initmem) memory: 424K Write protecting kernel text and read-only data: 6556k Run /sbin/init as init process with arguments: /sbin/init emergency with environment: HOME=/ TERM=linux BOOT_IMAGE=bisect uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? process '/sbin/init' started with executable stack uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! random: fast init done uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! INIT: input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2 version 2.85 booting uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! Give root password for maintenance (or type Control-D for normal startup): uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! Login incorrect. Give root password for maintenance (or type Control-D for normal startup): sysrq: HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w) Login incorrect. Give root password for maintenance (or type Control-D for normal startup): sysrq: Resetting