From: CKI Project <cki-project@redhat.com>
To: Linux Stable maillist <stable@vger.kernel.org>
Subject: ✅ PASS: Stable queue: queue-4.19
Date: Mon, 3 Jun 2019 13:13:31 -0400 [thread overview]
Message-ID: <cki.94B8DA4FC1.X8L13E2TB4@redhat.com> (raw)
Hello,
We ran automated tests on a patchset that was proposed for merging into this
kernel tree. The patches were applied to:
Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: 0df021b2e841 - Linux 4.19.47
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Merge testing
-------------
We cloned this repository and checked out the following commit:
Repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: 0df021b2e841 - Linux 4.19.47
We then merged the patchset with `git am`:
bonding-802.3ad-fix-slave-link-initialization-transition-states.patch
cxgb4-offload-vlan-flows-regardless-of-vlan-ethtype.patch
inet-switch-ip-id-generator-to-siphash.patch
ipv4-igmp-fix-another-memory-leak-in-igmpv3_del_delrec.patch
ipv4-igmp-fix-build-error-if-config_ip_multicast.patch
ipv6-consider-sk_bound_dev_if-when-binding-a-raw-socket-to-an-address.patch
ipv6-fix-redirect-with-vrf.patch
llc-fix-skb-leak-in-llc_build_and_send_ui_pkt.patch
net-dsa-mv88e6xxx-fix-handling-of-upper-half-of-stats_type_port.patch
net-fec-fix-the-clk-mismatch-in-failed_reset-path.patch
net-gro-fix-use-after-free-read-in-napi_gro_frags.patch
net-mvneta-fix-err-code-path-of-probe.patch
net-mvpp2-fix-bad-mvpp2_txq_sched_token_cntr_reg-queue-value.patch
net-phy-marvell10g-report-if-the-phy-fails-to-boot-firmware.patch
net-sched-don-t-use-tc_action-order-during-action-dump.patch
net-stmmac-fix-reset-gpio-free-missing.patch
usbnet-fix-kernel-crash-after-disconnect.patch
net-mlx5-avoid-double-free-in-fs-init-error-unwinding-path.patch
tipc-avoid-copying-bytes-beyond-the-supplied-data.patch
net-mlx5-allocate-root-ns-memory-using-kzalloc-to-match-kfree.patch
net-mlx5e-disable-rxhash-when-cqe-compress-is-enabled.patch
net-stmmac-dma-channel-control-register-need-to-be-init-first.patch
bnxt_en-fix-aggregation-buffer-leak-under-oom-condition.patch
net-tls-fix-state-removal-with-feature-flags-off.patch
net-tls-don-t-ignore-netdev-notifications-if-no-tls-features.patch
crypto-vmx-ghash-do-nosimd-fallback-manually.patch
include-linux-compiler-.h-define-asm_volatile_goto.patch
compiler.h-give-up-__compiletime_assert_fallback.patch
jump_label-move-asm-goto-support-test-to-kconfig.patch
xen-pciback-don-t-disable-pci_command-on-pci-device-reset.patch
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_4.19-aarch64-df83ce0018363ee00e4ee0542f0f295444afc141.config
kernel build: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_4.19-aarch64-df83ce0018363ee00e4ee0542f0f295444afc141.tar.gz
ppc64le:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_4.19-ppc64le-df83ce0018363ee00e4ee0542f0f295444afc141.config
kernel build: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_4.19-ppc64le-df83ce0018363ee00e4ee0542f0f295444afc141.tar.gz
s390x:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_4.19-s390x-df83ce0018363ee00e4ee0542f0f295444afc141.config
kernel build: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_4.19-s390x-df83ce0018363ee00e4ee0542f0f295444afc141.tar.gz
x86_64:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_4.19-x86_64-df83ce0018363ee00e4ee0542f0f295444afc141.config
kernel build: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_4.19-x86_64-df83ce0018363ee00e4ee0542f0f295444afc141.tar.gz
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Host 2:
✅ Boot test [0]
✅ LTP lite [2]
✅ AMTU (Abstract Machine Test Utility) [3]
✅ Ethernet drivers sanity [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
✅ tuned: tune-processes-through-perf [8]
✅ Usex - version 1.9-29 [9]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking: igmp conformance test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
ppc64le:
Host 1:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Host 2:
✅ Boot test [0]
✅ LTP lite [2]
✅ AMTU (Abstract Machine Test Utility) [3]
✅ Ethernet drivers sanity [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
✅ tuned: tune-processes-through-perf [8]
✅ Usex - version 1.9-29 [9]
✅ stress: stress-ng [10]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
s390x:
Host 1:
✅ Boot test [0]
✅ LTP lite [2]
✅ Ethernet drivers sanity [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
✅ tuned: tune-processes-through-perf [8]
✅ stress: stress-ng [10]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking: igmp conformance test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
Host 2:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
x86_64:
Host 1:
✅ Boot test [0]
✅ LTP lite [2]
✅ AMTU (Abstract Machine Test Utility) [3]
✅ Ethernet drivers sanity [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
✅ tuned: tune-processes-through-perf [8]
✅ Usex - version 1.9-29 [9]
✅ stress: stress-ng [10]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking: igmp conformance test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
Host 2:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Test source:
💚 Pull requests are welcome for new tests or improvements to existing tests!
[0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/kpkginstall
[1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/selinux-policy/serge-testsuite
[2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/ltp/lite
[3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu
[4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/driver/sanity
[5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/audit/audit-testsuite
[6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/httpd/mod_ssl-smoke
[7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/iotop/sanity
[8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tuned/tune-processes-through-perf
[9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#standards/usex/1.9-29
[10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#stress/stress-ng
[11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/socket/fuzz
[12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#networking/igmp/conformance
[13]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/route/pmtu
[14]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/route/route_func
Waived tests (marked with 🚧)
-----------------------------
This test run included waived tests. Such tests are executed but their results
are not taken into account. Tests are waived when their results are not
reliable enough, e.g. when they're just introduced or are being fixed.
next reply other threads:[~2019-06-03 17:13 UTC|newest]
Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 17:13 CKI Project [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-07-06 9:02 ✅ PASS: Stable queue: queue-4.19 CKI Project
2019-07-06 7:50 CKI Project
2019-07-05 17:25 CKI Project
2019-07-05 13:54 CKI Project
2019-07-05 11:39 CKI Project
2019-07-02 12:24 CKI Project
2019-07-02 12:06 CKI Project
2019-07-02 10:22 CKI Project
2019-07-02 7:37 CKI Project
2019-07-01 22:13 CKI Project
2019-07-01 19:06 CKI Project
2019-07-01 18:31 CKI Project
2019-07-01 16:57 CKI Project
2019-06-29 1:17 CKI Project
2019-06-28 21:42 CKI Project
2019-06-28 1:35 CKI Project
2019-06-27 13:34 CKI Project
2019-06-27 4:12 CKI Project
2019-06-27 2:41 CKI Project
2019-06-27 2:39 CKI Project
2019-06-27 2:34 CKI Project
2019-06-26 12:33 CKI Project
2019-06-26 10:59 CKI Project
2019-06-26 5:29 CKI Project
2019-06-26 3:21 CKI Project
2019-06-26 3:08 CKI Project
2019-06-25 13:02 CKI Project
2019-06-25 5:30 CKI Project
2019-06-25 1:58 CKI Project
2019-06-24 18:30 CKI Project
2019-06-24 11:49 CKI Project
2019-06-24 11:16 CKI Project
2019-06-24 9:03 CKI Project
2019-06-24 6:01 CKI Project
2019-06-24 1:47 CKI Project
2019-06-23 18:05 CKI Project
2019-06-23 17:00 CKI Project
2019-06-23 14:07 CKI Project
2019-06-23 6:32 CKI Project
2019-06-23 5:51 CKI Project
2019-06-22 17:39 CKI Project
2019-06-22 17:32 CKI Project
2019-06-22 9:47 CKI Project
2019-06-22 8:49 CKI Project
2019-06-22 8:46 CKI Project
2019-06-20 22:03 CKI Project
2019-06-20 17:18 CKI Project
2019-06-20 8:08 CKI Project
2019-06-19 19:04 CKI Project
2019-06-19 17:05 CKI Project
2019-06-19 16:05 CKI Project
2019-06-17 20:25 CKI Project
2019-06-17 17:37 CKI Project
2019-06-14 4:46 CKI Project
2019-06-14 3:36 CKI Project
2019-06-14 0:56 CKI Project
2019-06-14 0:17 CKI Project
2019-06-13 23:38 CKI Project
2019-06-13 19:05 CKI Project
2019-06-12 17:17 CKI Project
2019-06-12 2:23 CKI Project
2019-06-11 21:45 CKI Project
2019-06-11 10:49 CKI Project
2019-06-10 18:21 CKI Project
2019-06-10 14:57 CKI Project
2019-06-10 8:42 CKI Project
2019-06-09 14:04 CKI Project
2019-06-09 13:46 CKI Project
2019-06-09 13:22 CKI Project
2019-06-09 9:44 CKI Project
2019-06-09 7:40 CKI Project
2019-06-07 17:18 CKI Project
2019-06-07 0:33 CKI Project
2019-06-06 19:13 CKI Project
2019-06-06 7:32 CKI Project
2019-06-04 18:05 CKI Project
2019-06-04 12:21 CKI Project
2019-06-04 12:10 CKI Project
2019-06-03 18:18 CKI Project
2019-06-01 3:24 CKI Project
2019-06-01 0:23 CKI Project
2019-05-30 3:38 CKI Project
2019-05-29 21:26 CKI Project
2019-05-28 18:33 CKI Project
2019-05-28 15:34 CKI Project
2019-05-28 9:48 CKI Project
2019-05-27 17:19 CKI Project
2019-05-27 16:31 CKI Project
2019-05-27 12:43 CKI Project
2019-05-24 19:25 CKI Project
2019-05-23 22:46 CKI Project
2019-05-23 16:59 CKI Project
2019-05-23 14:18 CKI Project
2019-05-23 14:08 CKI Project
2019-05-22 9:25 CKI Project
2019-05-21 21:24 CKI Project
2019-05-20 14:01 CKI Project
2019-05-18 12:26 CKI Project
2019-05-17 17:49 CKI Project
2019-05-17 15:43 CKI Project
2019-05-17 15:00 CKI Project
2019-05-17 5:25 CKI Project
2019-05-15 11:04 CKI Project
2019-05-15 10:49 CKI Project
2019-05-15 8:25 CKI Project
2019-05-14 12:20 CKI Project
2019-05-14 4:20 CKI Project
2019-05-13 22:13 CKI Project
2019-05-13 10:11 CKI Project
2019-05-11 3:41 CKI Project
2019-05-10 8:27 CKI Project
2019-05-09 20:18 CKI Project
2019-05-09 19:18 CKI Project
2019-05-09 17:15 CKI Project
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cki.94B8DA4FC1.X8L13E2TB4@redhat.com \
--to=cki-project@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).