From: CKI Project <cki-project@redhat.com> To: Linux Stable maillist <stable@vger.kernel.org> Subject: ✅ PASS: Stable queue: queue-5.2 Date: Thu, 19 Sep 2019 15:56:31 -0400 Message-ID: <cki.C679103D4E.BLJOJTN7PS@redhat.com> (raw) Hello, We ran automated tests on a patchset that was proposed for merging into this kernel tree. The patches were applied to: Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 1e2ba4a74fa7 - Linux 5.2.16 The results of these automated tests are provided below. Overall result: PASSED Merge: OK Compile: OK Tests: OK All kernel binaries, config files, and logs are available for download here: https://artifacts.cki-project.org/pipelines/174802 Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective. ,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________ Merge testing ------------- We cloned this repository and checked out the following commit: Repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 1e2ba4a74fa7 - Linux 5.2.16 We grabbed the 1f6dc2bee06f commit of the stable queue repository. We then merged the patchset with `git am`: usb-usbcore-fix-slab-out-of-bounds-bug-during-device-reset.patch media-tm6000-double-free-if-usb-disconnect-while-streaming.patch phy-renesas-rcar-gen3-usb2-disable-clearing-vbus-in-over-current.patch net-hns3-adjust-hns3_uninit_phy-s-location-in-the-hns3_client_uninit.patch netfilter-nf_flow_table-set-default-timeout-after-successful-insertion.patch hid-wacom-generic-read-hid_dg_contactmax-from-any-feature-report.patch input-elan_i2c-remove-lenovo-legion-y7000-pnpid.patch sunrpc-handle-connection-breakages-correctly-in-call_status.patch media-stm32-dcmi-fix-irq-0-case.patch nfs-disable-client-side-deduplication.patch powerpc-mm-radix-use-the-right-page-size-for-vmemmap-mapping.patch scripts-decode_stacktrace-match-basepath-using-shell-prefix-operator-not-regex.patch net-hns-fix-led-configuration-for-marvell-phy.patch net-aquantia-fix-limit-of-vlan-filters.patch ip6_gre-fix-a-dst-leak-in-ip6erspan_tunnel_xmit.patch net-sched-fix-race-between-deactivation-and-dequeue-for-nolock-qdisc.patch net_sched-let-qdisc_put-accept-null-pointer.patch udp-correct-reuseport-selection-with-connected-sockets.patch xen-netfront-do-not-assume-sk_buff_head-list-is-empty-in-error-handling.patch net-dsa-fix-load-order-between-dsa-drivers-and-taggers.patch kvm-coalesced_mmio-add-bounds-checking.patch firmware-google-check-if-size-is-valid-when-decoding-vpd-data.patch serial-sprd-correct-the-wrong-sequence-of-arguments.patch tty-serial-atmel-reschedule-tx-after-rx-was-started.patch Compile testing --------------- We compiled the kernel for 3 architectures: aarch64: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg ppc64le: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg x86_64: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg Hardware testing ---------------- We booted each kernel and ran the following tests: aarch64: ⚡ Internal infrastructure issues prevented one or more tests (marked with ⚡⚡⚡) from running on this architecture. This is not the fault of the kernel that was tested. ppc64le: ⚡ Internal infrastructure issues prevented one or more tests (marked with ⚡⚡⚡) from running on this architecture. This is not the fault of the kernel that was tested. x86_64: ⚡ Internal infrastructure issues prevented one or more tests (marked with ⚡⚡⚡) from running on this architecture. This is not the fault of the kernel that was tested. Test sources: https://github.com/CKI-project/tests-beaker 💚 Pull requests are welcome for new tests or improvements to existing tests! Waived tests ------------ If the test run included waived tests, they are marked with 🚧. Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed.
next reply index Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-09-19 19:56 CKI Project [this message] -- strict thread matches above, loose matches on Subject: below -- 2019-09-20 7:39 CKI Project 2019-09-20 9:17 ` Veronika Kabatova 2019-09-20 6:17 CKI Project 2019-09-20 0:58 CKI Project 2019-09-19 20:05 CKI Project 2019-09-19 18:02 CKI Project 2019-09-19 18:40 ` Major Hayden 2019-09-19 15:36 CKI Project 2019-09-18 4:57 CKI Project 2019-09-18 2:38 CKI Project 2019-09-18 0:29 CKI Project 2019-09-18 0:20 CKI Project 2019-09-17 20:29 CKI Project 2019-09-17 20:23 CKI Project 2019-09-17 12:09 CKI Project 2019-09-17 10:58 CKI Project 2019-09-16 17:53 CKI Project 2019-09-16 4:52 CKI Project 2019-09-13 5:28 CKI Project 2019-09-11 14:08 CKI Project 2019-09-08 18:46 CKI Project 2019-09-08 14:49 CKI Project 2019-09-08 2:35 CKI Project 2019-09-06 15:20 CKI Project 2019-09-06 0:55 CKI Project 2019-09-05 3:19 CKI Project 2019-09-04 17:20 CKI Project 2019-09-04 9:43 CKI Project 2019-09-04 1:37 CKI Project 2019-09-04 0:50 CKI Project 2019-09-03 13:09 CKI Project 2019-09-03 12:21 CKI Project 2019-09-03 6:23 CKI Project 2019-09-02 23:04 CKI Project 2019-08-30 13:35 CKI Project 2019-08-29 19:35 CKI Project 2019-08-27 9:38 CKI Project 2019-08-27 1:47 CKI Project 2019-08-26 23:55 CKI Project 2019-08-26 23:50 CKI Project 2019-08-26 15:35 CKI Project 2019-08-26 6:14 CKI Project 2019-08-21 5:19 CKI Project 2019-08-21 4:23 CKI Project 2019-08-20 22:57 CKI Project 2019-08-19 7:50 CKI Project 2019-08-18 9:29 CKI Project 2019-08-16 13:31 CKI Project 2019-08-15 6:05 CKI Project 2019-08-15 3:24 CKI Project 2019-08-14 9:17 CKI Project 2019-08-14 2:15 CKI Project
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cki.C679103D4E.BLJOJTN7PS@redhat.com \ --to=cki-project@redhat.com \ --cc=stable@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Stable Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/stable/0 stable/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 stable stable/ https://lore.kernel.org/stable \ stable@vger.kernel.org public-inbox-index stable Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.stable AGPL code for this site: git clone https://public-inbox.org/public-inbox.git