Stable Archive on lore.kernel.org
 help / Atom feed
* [PATCH 4.9 00/44] 4.9.178-stable review
@ 2019-05-20 12:13 Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 01/44] net: core: another layer of lists, around PF_MEMALLOC skb handling Greg Kroah-Hartman
                   ` (47 more replies)
  0 siblings, 48 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
	ben.hutchings, lkft-triage, stable

This is the start of the stable review cycle for the 4.9.178 release.
There are 44 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed 22 May 2019 11:50:58 AM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.178-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.178-rc1

Sean Christopherson <sean.j.christopherson@intel.com>
    KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes

Michał Wadowski <wadosm@gmail.com>
    ALSA: hda/realtek - Fix for Lenovo B50-70 inverted internal microphone bug

Lukas Czerner <lczerner@redhat.com>
    ext4: fix data corruption caused by overlapping unaligned and aligned IO

Sriram Rajagopalan <sriramr@arista.com>
    ext4: zero out the unused memory region in the extent tree block

Jiufei Xue <jiufei.xue@linux.alibaba.com>
    fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount

Tejun Heo <tj@kernel.org>
    writeback: synchronize sync(2) against cgroup writeback membership switches

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    fib_rules: fix error in backport of e9919a24d302 ("fib_rules: return 0...")

Eric Biggers <ebiggers@google.com>
    crypto: arm/aes-neonbs - don't access already-freed walk.iv

Eric Biggers <ebiggers@google.com>
    crypto: salsa20 - don't access already-freed walk.iv

Eric Biggers <ebiggers@google.com>
    crypto: gcm - fix incompatibility between "gcm" and "gcm_base"

Wei Yongjun <weiyongjun1@huawei.com>
    crypto: gcm - Fix error return code in crypto_gcm_create_common()

Kamlakant Patel <kamlakantp@marvell.com>
    ipmi:ssif: compare block number correctly for multi-part return messages

Coly Li <colyli@suse.de>
    bcache: never set KEY_PTRS of journal key to 0 in journal_reclaim()

Liang Chen <liangchen.linux@gmail.com>
    bcache: fix a race between cache register and cacheset unregister

Filipe Manana <fdmanana@suse.com>
    Btrfs: do not start a transaction at iterate_extent_inodes()

Debabrata Banerjee <dbanerje@akamai.com>
    ext4: fix ext4_show_options for file systems w/o journal

Kirill Tkhai <ktkhai@virtuozzo.com>
    ext4: actually request zeroing of inode table after grow

Jiufei Xue <jiufei.xue@linux.alibaba.com>
    jbd2: check superblock mapped prior to committing

Sergei Trofimovich <slyfox@gentoo.org>
    tty/vt: fix write/write race in ioctl(KDSKBSENT) handler

Dmitry Osipenko <digetx@gmail.com>
    mfd: max77620: Fix swapped FPS_PERIOD_MAX_US values

Steve Twiss <stwiss.opensource@diasemi.com>
    mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L

Shuning Zhang <sunny.s.zhang@oracle.com>
    ocfs2: fix ocfs2 read inode data panic in ocfs2_iget

Jiri Kosina <jkosina@suse.cz>
    mm/mincore.c: make mincore() more conservative

Curtis Malainey <cujomalainey@chromium.org>
    ASoC: RT5677-SPI: Disable 16Bit SPI Transfers

Jon Hunter <jonathanh@nvidia.com>
    ASoC: max98090: Fix restore of DAPM Muxes

Kailang Yang <kailang@realtek.com>
    ALSA: hda/realtek - EAPD turn on later

Hui Wang <hui.wang@canonical.com>
    ALSA: hda/hdmi - Consider eld_valid when reporting jack event

Hui Wang <hui.wang@canonical.com>
    ALSA: hda/hdmi - Read the pin sense from register when repolling

Wenwen Wang <wang6495@umn.edu>
    ALSA: usb-audio: Fix a memory leak bug

Eric Biggers <ebiggers@google.com>
    crypto: x86/crct10dif-pcl - fix use via crypto_shash_digest()

Eric Biggers <ebiggers@google.com>
    crypto: crct10dif-generic - fix use via crypto_shash_digest()

Daniel Axtens <dja@axtens.net>
    crypto: vmx - fix copy-paste error in CTR mode

Eric Biggers <ebiggers@google.com>
    crypto: chacha20poly1305 - set cra_name correctly

Peter Zijlstra <peterz@infradead.org>
    sched/x86: Save [ER]FLAGS on context switch

Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
    arm64: Clear OSDLR_EL1 on CPU boot

Vincenzo Frascino <vincenzo.frascino@arm.com>
    arm64: compat: Reduce address limit

Gustavo A. R. Silva <gustavo@embeddedor.com>
    power: supply: axp288_charger: Fix unchecked return value

Wen Yang <wen.yang99@zte.com.cn>
    ARM: exynos: Fix a leaked reference by adding missing of_node_put

Josh Poimboeuf <jpoimboe@redhat.com>
    objtool: Fix function fallthrough detection

Andy Lutomirski <luto@kernel.org>
    x86/speculation/mds: Improve CPU buffer clear documentation

Andy Lutomirski <luto@kernel.org>
    x86/speculation/mds: Revert CPU buffer clear on double fault exit

Dexuan Cui <decui@microsoft.com>
    PCI: hv: Fix a memory leak in hv_eject_device_work()

Waiman Long <longman@redhat.com>
    locking/rwsem: Prevent decrement of reader count before increment

Sasha Levin <sashal@kernel.org>
    net: core: another layer of lists, around PF_MEMALLOC skb handling


-------------

Diffstat:

 Documentation/x86/mds.rst               | 44 ++++------------------------
 Makefile                                |  4 +--
 arch/arm/crypto/aesbs-glue.c            |  4 +++
 arch/arm/mach-exynos/firmware.c         |  1 +
 arch/arm/mach-exynos/suspend.c          |  2 ++
 arch/arm64/include/asm/processor.h      |  8 ++++++
 arch/arm64/kernel/debug-monitors.c      |  1 +
 arch/x86/crypto/crct10dif-pclmul_glue.c | 13 ++++-----
 arch/x86/entry/entry_32.S               |  2 ++
 arch/x86/entry/entry_64.S               |  2 ++
 arch/x86/include/asm/switch_to.h        |  1 +
 arch/x86/kernel/process_32.c            |  7 +++++
 arch/x86/kernel/process_64.c            |  8 ++++++
 arch/x86/kernel/traps.c                 |  8 ------
 arch/x86/kvm/x86.c                      | 33 ++++++++++++++-------
 crypto/chacha20poly1305.c               |  4 +--
 crypto/crct10dif_generic.c              | 11 +++----
 crypto/gcm.c                            | 36 ++++++++---------------
 crypto/salsa20_generic.c                |  2 +-
 drivers/char/ipmi/ipmi_ssif.c           |  6 +++-
 drivers/crypto/vmx/aesp8-ppc.pl         |  4 +--
 drivers/md/bcache/journal.c             | 11 ++++---
 drivers/md/bcache/super.c               |  2 +-
 drivers/pci/host/pci-hyperv.c           |  1 +
 drivers/power/supply/axp288_charger.c   |  4 +++
 drivers/tty/vt/keyboard.c               | 33 +++++++++++++++++----
 fs/btrfs/backref.c                      | 18 ++++++++----
 fs/ext4/extents.c                       | 17 +++++++++--
 fs/ext4/file.c                          |  7 +++++
 fs/ext4/ioctl.c                         |  2 +-
 fs/ext4/super.c                         |  2 +-
 fs/fs-writeback.c                       | 51 +++++++++++++++++++++++++++++----
 fs/jbd2/journal.c                       |  4 +++
 fs/ocfs2/export.c                       | 30 ++++++++++++++++++-
 include/linux/backing-dev-defs.h        |  1 +
 include/linux/list.h                    | 30 +++++++++++++++++++
 include/linux/mfd/da9063/registers.h    |  6 ++--
 include/linux/mfd/max77620.h            |  4 +--
 kernel/locking/rwsem-xadd.c             | 44 +++++++++++++++++++---------
 mm/backing-dev.c                        |  1 +
 mm/mincore.c                            | 23 ++++++++++++++-
 net/core/fib_rules.c                    |  1 +
 sound/pci/hda/patch_hdmi.c              | 11 +++++--
 sound/pci/hda/patch_realtek.c           |  5 ++--
 sound/soc/codecs/max98090.c             | 12 ++++----
 sound/soc/codecs/rt5677-spi.c           | 35 +++++++++++-----------
 sound/usb/mixer.c                       |  2 ++
 tools/objtool/check.c                   |  3 +-
 48 files changed, 379 insertions(+), 182 deletions(-)



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 01/44] net: core: another layer of lists, around PF_MEMALLOC skb handling
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
@ 2019-05-20 12:13 ` Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 02/44] locking/rwsem: Prevent decrement of reader count before increment Greg Kroah-Hartman
                   ` (46 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Edward Cree, David S. Miller, Sasha Levin

[ Upstream commit 78ed8cc25986ac5c21762eeddc1e86e94d422e36 ]

First example of a layer splitting the list (rather than merely taking
 individual packets off it).
Involves new list.h function, list_cut_before(), like list_cut_position()
 but cuts on the other side of the given entry.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[sl: cut out non list.h bits, we only want list_cut_before]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/list.h | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/include/linux/list.h b/include/linux/list.h
index 5809e9a2de5b2..6f935018ea056 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -271,6 +271,36 @@ static inline void list_cut_position(struct list_head *list,
 		__list_cut_position(list, head, entry);
 }
 
+/**
+ * list_cut_before - cut a list into two, before given entry
+ * @list: a new list to add all removed entries
+ * @head: a list with entries
+ * @entry: an entry within head, could be the head itself
+ *
+ * This helper moves the initial part of @head, up to but
+ * excluding @entry, from @head to @list.  You should pass
+ * in @entry an element you know is on @head.  @list should
+ * be an empty list or a list you do not care about losing
+ * its data.
+ * If @entry == @head, all entries on @head are moved to
+ * @list.
+ */
+static inline void list_cut_before(struct list_head *list,
+				   struct list_head *head,
+				   struct list_head *entry)
+{
+	if (head->next == entry) {
+		INIT_LIST_HEAD(list);
+		return;
+	}
+	list->next = head->next;
+	list->next->prev = list;
+	list->prev = entry->prev;
+	list->prev->next = list;
+	head->next = entry;
+	entry->prev = head;
+}
+
 static inline void __list_splice(const struct list_head *list,
 				 struct list_head *prev,
 				 struct list_head *next)
-- 
2.20.1




^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 02/44] locking/rwsem: Prevent decrement of reader count before increment
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 01/44] net: core: another layer of lists, around PF_MEMALLOC skb handling Greg Kroah-Hartman
@ 2019-05-20 12:13 ` Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 03/44] PCI: hv: Fix a memory leak in hv_eject_device_work() Greg Kroah-Hartman
                   ` (45 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Waiman Long, Linus Torvalds,
	Borislav Petkov, Davidlohr Bueso, Peter Zijlstra,
	Thomas Gleixner, Tim Chen, Will Deacon, huang ying, Ingo Molnar,
	Sasha Levin

[ Upstream commit a9e9bcb45b1525ba7aea26ed9441e8632aeeda58 ]

During my rwsem testing, it was found that after a down_read(), the
reader count may occasionally become 0 or even negative. Consequently,
a writer may steal the lock at that time and execute with the reader
in parallel thus breaking the mutual exclusion guarantee of the write
lock. In other words, both readers and writer can become rwsem owners
simultaneously.

The current reader wakeup code does it in one pass to clear waiter->task
and put them into wake_q before fully incrementing the reader count.
Once waiter->task is cleared, the corresponding reader may see it,
finish the critical section and do unlock to decrement the count before
the count is incremented. This is not a problem if there is only one
reader to wake up as the count has been pre-incremented by 1.  It is
a problem if there are more than one readers to be woken up and writer
can steal the lock.

The wakeup was actually done in 2 passes before the following v4.9 commit:

  70800c3c0cc5 ("locking/rwsem: Scan the wait_list for readers only once")

To fix this problem, the wakeup is now done in two passes
again. In the first pass, we collect the readers and count them.
The reader count is then fully incremented. In the second pass, the
waiter->task is then cleared and they are put into wake_q to be woken
up later.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Fixes: 70800c3c0cc5 ("locking/rwsem: Scan the wait_list for readers only once")
Link: http://lkml.kernel.org/r/20190428212557.13482-2-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/rwsem-xadd.c | 44 +++++++++++++++++++++++++------------
 1 file changed, 30 insertions(+), 14 deletions(-)

diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c
index be06c45cbe4f9..0cdbb636e3163 100644
--- a/kernel/locking/rwsem-xadd.c
+++ b/kernel/locking/rwsem-xadd.c
@@ -127,6 +127,7 @@ static void __rwsem_mark_wake(struct rw_semaphore *sem,
 {
 	struct rwsem_waiter *waiter, *tmp;
 	long oldcount, woken = 0, adjustment = 0;
+	struct list_head wlist;
 
 	/*
 	 * Take a peek at the queue head waiter such that we can determine
@@ -185,18 +186,42 @@ static void __rwsem_mark_wake(struct rw_semaphore *sem,
 	 * of the queue. We know that woken will be at least 1 as we accounted
 	 * for above. Note we increment the 'active part' of the count by the
 	 * number of readers before waking any processes up.
+	 *
+	 * We have to do wakeup in 2 passes to prevent the possibility that
+	 * the reader count may be decremented before it is incremented. It
+	 * is because the to-be-woken waiter may not have slept yet. So it
+	 * may see waiter->task got cleared, finish its critical section and
+	 * do an unlock before the reader count increment.
+	 *
+	 * 1) Collect the read-waiters in a separate list, count them and
+	 *    fully increment the reader count in rwsem.
+	 * 2) For each waiters in the new list, clear waiter->task and
+	 *    put them into wake_q to be woken up later.
 	 */
-	list_for_each_entry_safe(waiter, tmp, &sem->wait_list, list) {
-		struct task_struct *tsk;
-
+	list_for_each_entry(waiter, &sem->wait_list, list) {
 		if (waiter->type == RWSEM_WAITING_FOR_WRITE)
 			break;
 
 		woken++;
-		tsk = waiter->task;
+	}
+	list_cut_before(&wlist, &sem->wait_list, &waiter->list);
+
+	adjustment = woken * RWSEM_ACTIVE_READ_BIAS - adjustment;
+	if (list_empty(&sem->wait_list)) {
+		/* hit end of list above */
+		adjustment -= RWSEM_WAITING_BIAS;
+	}
+
+	if (adjustment)
+		atomic_long_add(adjustment, &sem->count);
+
+	/* 2nd pass */
+	list_for_each_entry_safe(waiter, tmp, &wlist, list) {
+		struct task_struct *tsk;
 
+		tsk = waiter->task;
 		get_task_struct(tsk);
-		list_del(&waiter->list);
+
 		/*
 		 * Ensure calling get_task_struct() before setting the reader
 		 * waiter to nil such that rwsem_down_read_failed() cannot
@@ -212,15 +237,6 @@ static void __rwsem_mark_wake(struct rw_semaphore *sem,
 		/* wake_q_add() already take the task ref */
 		put_task_struct(tsk);
 	}
-
-	adjustment = woken * RWSEM_ACTIVE_READ_BIAS - adjustment;
-	if (list_empty(&sem->wait_list)) {
-		/* hit end of list above */
-		adjustment -= RWSEM_WAITING_BIAS;
-	}
-
-	if (adjustment)
-		atomic_long_add(adjustment, &sem->count);
 }
 
 /*
-- 
2.20.1




^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 03/44] PCI: hv: Fix a memory leak in hv_eject_device_work()
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 01/44] net: core: another layer of lists, around PF_MEMALLOC skb handling Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 02/44] locking/rwsem: Prevent decrement of reader count before increment Greg Kroah-Hartman
@ 2019-05-20 12:13 ` Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 04/44] x86/speculation/mds: Revert CPU buffer clear on double fault exit Greg Kroah-Hartman
                   ` (44 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dexuan Cui, Lorenzo Pieralisi,
	Stephen Hemminger, Michael Kelley, Sasha Levin

[ Upstream commit 05f151a73ec2b23ffbff706e5203e729a995cdc2 ]

When a device is created in new_pcichild_device(), hpdev->refs is set
to 2 (i.e. the initial value of 1 plus the get_pcichild()).

When we hot remove the device from the host, in a Linux VM we first call
hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and
then schedules a work of hv_eject_device_work(), so hpdev->refs becomes
3 (let's ignore the paired get/put_pcichild() in other places). But in
hv_eject_device_work(), currently we only call put_pcichild() twice,
meaning the 'hpdev' struct can't be freed in put_pcichild().

Add one put_pcichild() to fix the memory leak.

The device can also be removed when we run "rmmod pci-hyperv". On this
path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()),
hpdev->refs is 2, and we do correctly call put_pcichild() twice in
pci_devices_present_work().

Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: commit log rework]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by:  Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pci-hyperv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index b4d8ccfd9f7c2..200b415765264 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -1620,6 +1620,7 @@ static void hv_eject_device_work(struct work_struct *work)
 	spin_unlock_irqrestore(&hpdev->hbus->device_list_lock, flags);
 
 	put_pcichild(hpdev, hv_pcidev_ref_childlist);
+	put_pcichild(hpdev, hv_pcidev_ref_initial);
 	put_pcichild(hpdev, hv_pcidev_ref_pnp);
 	put_hvpcibus(hpdev->hbus);
 }
-- 
2.20.1




^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 04/44] x86/speculation/mds: Revert CPU buffer clear on double fault exit
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (2 preceding siblings ...)
  2019-05-20 12:13 ` [PATCH 4.9 03/44] PCI: hv: Fix a memory leak in hv_eject_device_work() Greg Kroah-Hartman
@ 2019-05-20 12:13 ` Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 05/44] x86/speculation/mds: Improve CPU buffer clear documentation Greg Kroah-Hartman
                   ` (43 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andy Lutomirski, Borislav Petkov,
	Frederic Weisbecker, Jon Masters, Linus Torvalds, Peter Zijlstra,
	Thomas Gleixner, Ingo Molnar

From: Andy Lutomirski <luto@kernel.org>

commit 88640e1dcd089879530a49a8d212d1814678dfe7 upstream.

The double fault ESPFIX path doesn't return to user mode at all --
it returns back to the kernel by simulating a #GP fault.
prepare_exit_to_usermode() will run on the way out of
general_protection before running user code.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jon Masters <jcm@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 04dcbdb80578 ("x86/speculation/mds: Clear CPU buffers on exit to user")
Link: http://lkml.kernel.org/r/ac97612445c0a44ee10374f6ea79c222fe22a5c4.1557865329.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/x86/mds.rst |    7 -------
 arch/x86/kernel/traps.c   |    8 --------
 2 files changed, 15 deletions(-)

--- a/Documentation/x86/mds.rst
+++ b/Documentation/x86/mds.rst
@@ -158,13 +158,6 @@ Mitigation points
      mitigated on the return from do_nmi() to provide almost complete
      coverage.
 
-   - Double fault (#DF):
-
-     A double fault is usually fatal, but the ESPFIX workaround, which can
-     be triggered from user space through modify_ldt(2) is a recoverable
-     double fault. #DF uses the paranoid exit path, so explicit mitigation
-     in the double fault handler is required.
-
    - Machine Check Exception (#MC):
 
      Another corner case is a #MC which hits between the CPU buffer clear
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -62,7 +62,6 @@
 #include <asm/alternative.h>
 #include <asm/fpu/xstate.h>
 #include <asm/trace/mpx.h>
-#include <asm/nospec-branch.h>
 #include <asm/mpx.h>
 #include <asm/vm86.h>
 
@@ -341,13 +340,6 @@ dotraplinkage void do_double_fault(struc
 		regs->ip = (unsigned long)general_protection;
 		regs->sp = (unsigned long)&normal_regs->orig_ax;
 
-		/*
-		 * This situation can be triggered by userspace via
-		 * modify_ldt(2) and the return does not take the regular
-		 * user space exit, so a CPU buffer clear is required when
-		 * MDS mitigation is enabled.
-		 */
-		mds_user_clear_cpu_buffers();
 		return;
 	}
 #endif



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 05/44] x86/speculation/mds: Improve CPU buffer clear documentation
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (3 preceding siblings ...)
  2019-05-20 12:13 ` [PATCH 4.9 04/44] x86/speculation/mds: Revert CPU buffer clear on double fault exit Greg Kroah-Hartman
@ 2019-05-20 12:13 ` Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 06/44] objtool: Fix function fallthrough detection Greg Kroah-Hartman
                   ` (42 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andy Lutomirski, Borislav Petkov,
	Frederic Weisbecker, Jon Masters, Linus Torvalds, Peter Zijlstra,
	Thomas Gleixner, Ingo Molnar

From: Andy Lutomirski <luto@kernel.org>

commit 9d8d0294e78a164d407133dea05caf4b84247d6a upstream.

On x86_64, all returns to usermode go through
prepare_exit_to_usermode(), with the sole exception of do_nmi().
This even includes machine checks -- this was added several years
ago to support MCE recovery.  Update the documentation.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jon Masters <jcm@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 04dcbdb80578 ("x86/speculation/mds: Clear CPU buffers on exit to user")
Link: http://lkml.kernel.org/r/999fa9e126ba6a48e9d214d2f18dbde5c62ac55c.1557865329.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/x86/mds.rst |   39 +++++++--------------------------------
 1 file changed, 7 insertions(+), 32 deletions(-)

--- a/Documentation/x86/mds.rst
+++ b/Documentation/x86/mds.rst
@@ -142,38 +142,13 @@ Mitigation points
    mds_user_clear.
 
    The mitigation is invoked in prepare_exit_to_usermode() which covers
-   most of the kernel to user space transitions. There are a few exceptions
-   which are not invoking prepare_exit_to_usermode() on return to user
-   space. These exceptions use the paranoid exit code.
-
-   - Non Maskable Interrupt (NMI):
-
-     Access to sensible data like keys, credentials in the NMI context is
-     mostly theoretical: The CPU can do prefetching or execute a
-     misspeculated code path and thereby fetching data which might end up
-     leaking through a buffer.
-
-     But for mounting other attacks the kernel stack address of the task is
-     already valuable information. So in full mitigation mode, the NMI is
-     mitigated on the return from do_nmi() to provide almost complete
-     coverage.
-
-   - Machine Check Exception (#MC):
-
-     Another corner case is a #MC which hits between the CPU buffer clear
-     invocation and the actual return to user. As this still is in kernel
-     space it takes the paranoid exit path which does not clear the CPU
-     buffers. So the #MC handler repopulates the buffers to some
-     extent. Machine checks are not reliably controllable and the window is
-     extremly small so mitigation would just tick a checkbox that this
-     theoretical corner case is covered. To keep the amount of special
-     cases small, ignore #MC.
-
-   - Debug Exception (#DB):
-
-     This takes the paranoid exit path only when the INT1 breakpoint is in
-     kernel space. #DB on a user space address takes the regular exit path,
-     so no extra mitigation required.
+   all but one of the kernel to user space transitions.  The exception
+   is when we return from a Non Maskable Interrupt (NMI), which is
+   handled directly in do_nmi().
+
+   (The reason that NMI is special is that prepare_exit_to_usermode() can
+    enable IRQs.  In NMI context, NMIs are blocked, and we don't want to
+    enable IRQs with NMIs blocked.)
 
 
 2. C-State transition



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 06/44] objtool: Fix function fallthrough detection
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (4 preceding siblings ...)
  2019-05-20 12:13 ` [PATCH 4.9 05/44] x86/speculation/mds: Improve CPU buffer clear documentation Greg Kroah-Hartman
@ 2019-05-20 12:13 ` Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 07/44] ARM: exynos: Fix a leaked reference by adding missing of_node_put Greg Kroah-Hartman
                   ` (41 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, kbuild test robot, Josh Poimboeuf,
	Linus Torvalds, Peter Zijlstra, Thomas Gleixner, Ingo Molnar

From: Josh Poimboeuf <jpoimboe@redhat.com>

commit e6f393bc939d566ce3def71232d8013de9aaadde upstream.

When a function falls through to the next function due to a compiler
bug, objtool prints some obscure warnings.  For example:

  drivers/regulator/core.o: warning: objtool: regulator_count_voltages()+0x95: return with modified stack frame
  drivers/regulator/core.o: warning: objtool: regulator_count_voltages()+0x0: stack state mismatch: cfa1=7+32 cfa2=7+8

Instead it should be printing:

  drivers/regulator/core.o: warning: objtool: regulator_supply_is_couple() falls through to next function regulator_count_voltages()

This used to work, but was broken by the following commit:

  13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")

The padding nops at the end of a function aren't actually part of the
function, as defined by the symbol table.  So the 'func' variable in
validate_branch() is getting cleared to NULL when a padding nop is
encountered, breaking the fallthrough detection.

If the current instruction doesn't have a function associated with it,
just consider it to be part of the previously detected function by not
overwriting the previous value of 'func'.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/546d143820cd08a46624ae8440d093dd6c902cae.1557766718.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/objtool/check.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -1779,7 +1779,8 @@ static int validate_branch(struct objtoo
 			return 1;
 		}
 
-		func = insn->func ? insn->func->pfunc : NULL;
+		if (insn->func)
+			func = insn->func->pfunc;
 
 		if (func && insn->ignore) {
 			WARN_FUNC("BUG: why am I validating an ignored function?",



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 07/44] ARM: exynos: Fix a leaked reference by adding missing of_node_put
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (5 preceding siblings ...)
  2019-05-20 12:13 ` [PATCH 4.9 06/44] objtool: Fix function fallthrough detection Greg Kroah-Hartman
@ 2019-05-20 12:13 ` Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 08/44] power: supply: axp288_charger: Fix unchecked return value Greg Kroah-Hartman
                   ` (40 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wen Yang, Krzysztof Kozlowski

From: Wen Yang <wen.yang99@zte.com.cn>

commit 629266bf7229cd6a550075f5961f95607b823b59 upstream.

The call to of_get_next_child returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with warnings like:
    arch/arm/mach-exynos/firmware.c:201:2-8: ERROR: missing of_node_put;
        acquired a node pointer with refcount incremented on line 193,
        but without a corresponding object release within this function.

Cc: stable@vger.kernel.org
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-exynos/firmware.c |    1 +
 arch/arm/mach-exynos/suspend.c  |    2 ++
 2 files changed, 3 insertions(+)

--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -205,6 +205,7 @@ void __init exynos_firmware_init(void)
 		return;
 
 	addr = of_get_address(nd, 0, NULL, NULL);
+	of_node_put(nd);
 	if (!addr) {
 		pr_err("%s: No address specified.\n", __func__);
 		return;
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -715,8 +715,10 @@ void __init exynos_pm_init(void)
 
 	if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
 		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
+		of_node_put(np);
 		return;
 	}
+	of_node_put(np);
 
 	pm_data = (const struct exynos_pm_data *) match->data;
 



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 08/44] power: supply: axp288_charger: Fix unchecked return value
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (6 preceding siblings ...)
  2019-05-20 12:13 ` [PATCH 4.9 07/44] ARM: exynos: Fix a leaked reference by adding missing of_node_put Greg Kroah-Hartman
@ 2019-05-20 12:13 ` Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 09/44] arm64: compat: Reduce address limit Greg Kroah-Hartman
                   ` (39 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Gustavo A. R. Silva, Hans de Goede,
	Sebastian Reichel

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit c3422ad5f84a66739ec6a37251ca27638c85b6be upstream.

Currently there is no check on platform_get_irq() return value
in case it fails, hence never actually reporting any errors and
causing unexpected behavior when using such value as argument
for function regmap_irq_get_virq().

Fix this by adding a proper check, a message reporting any errors
and returning *pirq*

Addresses-Coverity-ID: 1443940 ("Improper use of negative value")
Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/supply/axp288_charger.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -899,6 +899,10 @@ static int axp288_charger_probe(struct p
 	/* Register charger interrupts */
 	for (i = 0; i < CHRG_INTR_END; i++) {
 		pirq = platform_get_irq(info->pdev, i);
+		if (pirq < 0) {
+			dev_err(&pdev->dev, "Failed to get IRQ: %d\n", pirq);
+			return pirq;
+		}
 		info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
 		if (info->irq[i] < 0) {
 			dev_warn(&info->pdev->dev,



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 09/44] arm64: compat: Reduce address limit
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (7 preceding siblings ...)
  2019-05-20 12:13 ` [PATCH 4.9 08/44] power: supply: axp288_charger: Fix unchecked return value Greg Kroah-Hartman
@ 2019-05-20 12:13 ` Greg Kroah-Hartman
  2019-05-20 12:13 ` [PATCH 4.9 10/44] arm64: Clear OSDLR_EL1 on CPU boot Greg Kroah-Hartman
                   ` (38 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Catalin Marinas, Will Deacon,
	Jann Horn, Vincenzo Frascino

From: Vincenzo Frascino <vincenzo.frascino@arm.com>

commit d263119387de9975d2acba1dfd3392f7c5979c18 upstream.

Currently, compat tasks running on arm64 can allocate memory up to
TASK_SIZE_32 (UL(0x100000000)).

This means that mmap() allocations, if we treat them as returning an
array, are not compliant with the sections 6.5.8 of the C standard
(C99) which states that: "If the expression P points to an element of
an array object and the expression Q points to the last element of the
same array object, the pointer expression Q+1 compares greater than P".

Redefine TASK_SIZE_32 to address the issue.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
[will: fixed typo in comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/include/asm/processor.h |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -49,7 +49,15 @@
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area.
  */
 #ifdef CONFIG_COMPAT
+#ifdef CONFIG_ARM64_64K_PAGES
+/*
+ * With CONFIG_ARM64_64K_PAGES enabled, the last page is occupied
+ * by the compat vectors page.
+ */
 #define TASK_SIZE_32		UL(0x100000000)
+#else
+#define TASK_SIZE_32		(UL(0x100000000) - PAGE_SIZE)
+#endif /* CONFIG_ARM64_64K_PAGES */
 #define TASK_SIZE		(test_thread_flag(TIF_32BIT) ? \
 				TASK_SIZE_32 : TASK_SIZE_64)
 #define TASK_SIZE_OF(tsk)	(test_tsk_thread_flag(tsk, TIF_32BIT) ? \



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 10/44] arm64: Clear OSDLR_EL1 on CPU boot
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (8 preceding siblings ...)
  2019-05-20 12:13 ` [PATCH 4.9 09/44] arm64: compat: Reduce address limit Greg Kroah-Hartman
@ 2019-05-20 12:13 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 11/44] sched/x86: Save [ER]FLAGS on context switch Greg Kroah-Hartman
                   ` (37 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:13 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jean-Philippe Brucker, Will Deacon

From: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>

commit 6fda41bf12615ee7c3ddac88155099b1a8cf8d00 upstream.

Some firmwares may reboot CPUs with OS Double Lock set. Make sure that
it is unlocked, in order to use debug exceptions.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kernel/debug-monitors.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -132,6 +132,7 @@ NOKPROBE_SYMBOL(disable_debug_monitors);
  */
 static int clear_os_lock(unsigned int cpu)
 {
+	write_sysreg(0, osdlr_el1);
 	write_sysreg(0, oslar_el1);
 	isb();
 	return 0;



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 11/44] sched/x86: Save [ER]FLAGS on context switch
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (9 preceding siblings ...)
  2019-05-20 12:13 ` [PATCH 4.9 10/44] arm64: Clear OSDLR_EL1 on CPU boot Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 12/44] crypto: chacha20poly1305 - set cra_name correctly Greg Kroah-Hartman
                   ` (36 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Julien Thierry,
	Peter Zijlstra (Intel),
	Andy Lutomirski, Borislav Petkov, Josh Poimboeuf, Linus Torvalds,
	Thomas Gleixner, stable, Ingo Molnar

From: Peter Zijlstra <peterz@infradead.org>

commit 6690e86be83ac75832e461c141055b5d601c0a6d upstream.

Effectively reverts commit:

  2c7577a75837 ("sched/x86_64: Don't save flags on context switch")

Specifically because SMAP uses FLAGS.AC which invalidates the claim
that the kernel has clean flags.

In particular; while preemption from interrupt return is fine (the
IRET frame on the exception stack contains FLAGS) it breaks any code
that does synchonous scheduling, including preempt_enable().

This has become a significant issue ever since commit:

  5b24a7a2aa20 ("Add 'unsafe' user access functions for batched accesses")

provided for means of having 'normal' C code between STAC / CLAC,
exposing the FLAGS.AC state. So far this hasn't led to trouble,
however fix it before it comes apart.

Reported-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
Fixes: 5b24a7a2aa20 ("Add 'unsafe' user access functions for batched accesses")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/entry/entry_32.S        |    2 ++
 arch/x86/entry/entry_64.S        |    2 ++
 arch/x86/include/asm/switch_to.h |    1 +
 arch/x86/kernel/process_32.c     |    7 +++++++
 arch/x86/kernel/process_64.c     |    8 ++++++++
 5 files changed, 20 insertions(+)

--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -219,6 +219,7 @@ ENTRY(__switch_to_asm)
 	pushl	%ebx
 	pushl	%edi
 	pushl	%esi
+	pushfl
 
 	/* switch stack */
 	movl	%esp, TASK_threadsp(%eax)
@@ -241,6 +242,7 @@ ENTRY(__switch_to_asm)
 #endif
 
 	/* restore callee-saved registers */
+	popfl
 	popl	%esi
 	popl	%edi
 	popl	%ebx
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -313,6 +313,7 @@ ENTRY(__switch_to_asm)
 	pushq	%r13
 	pushq	%r14
 	pushq	%r15
+	pushfq
 
 	/* switch stack */
 	movq	%rsp, TASK_threadsp(%rdi)
@@ -335,6 +336,7 @@ ENTRY(__switch_to_asm)
 #endif
 
 	/* restore callee-saved registers */
+	popfq
 	popq	%r15
 	popq	%r14
 	popq	%r13
--- a/arch/x86/include/asm/switch_to.h
+++ b/arch/x86/include/asm/switch_to.h
@@ -35,6 +35,7 @@ asmlinkage void ret_from_fork(void);
 
 /* data that is pointed to by thread.sp */
 struct inactive_task_frame {
+	unsigned long flags;
 #ifdef CONFIG_X86_64
 	unsigned long r15;
 	unsigned long r14;
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -129,6 +129,13 @@ int copy_thread_tls(unsigned long clone_
 	struct task_struct *tsk;
 	int err;
 
+	/*
+	 * For a new task use the RESET flags value since there is no before.
+	 * All the status flags are zero; DF and all the system flags must also
+	 * be 0, specifically IF must be 0 because we context switch to the new
+	 * task with interrupts disabled.
+	 */
+	frame->flags = X86_EFLAGS_FIXED;
 	frame->bp = 0;
 	frame->ret_addr = (unsigned long) ret_from_fork;
 	p->thread.sp = (unsigned long) fork_frame;
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -268,6 +268,14 @@ int copy_thread_tls(unsigned long clone_
 	childregs = task_pt_regs(p);
 	fork_frame = container_of(childregs, struct fork_frame, regs);
 	frame = &fork_frame->frame;
+
+	/*
+	 * For a new task use the RESET flags value since there is no before.
+	 * All the status flags are zero; DF and all the system flags must also
+	 * be 0, specifically IF must be 0 because we context switch to the new
+	 * task with interrupts disabled.
+	 */
+	frame->flags = X86_EFLAGS_FIXED;
 	frame->bp = 0;
 	frame->ret_addr = (unsigned long) ret_from_fork;
 	p->thread.sp = (unsigned long) fork_frame;



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 12/44] crypto: chacha20poly1305 - set cra_name correctly
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (10 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 11/44] sched/x86: Save [ER]FLAGS on context switch Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 13/44] crypto: vmx - fix copy-paste error in CTR mode Greg Kroah-Hartman
                   ` (35 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Martin Willi, Eric Biggers, Herbert Xu

From: Eric Biggers <ebiggers@google.com>

commit 5e27f38f1f3f45a0c938299c3a34a2d2db77165a upstream.

If the rfc7539 template is instantiated with specific implementations,
e.g. "rfc7539(chacha20-generic,poly1305-generic)" rather than
"rfc7539(chacha20,poly1305)", then the implementation names end up
included in the instance's cra_name.  This is incorrect because it then
prevents all users from allocating "rfc7539(chacha20,poly1305)", if the
highest priority implementations of chacha20 and poly1305 were selected.
Also, the self-tests aren't run on an instance allocated in this way.

Fix it by setting the instance's cra_name from the underlying
algorithms' actual cra_names, rather than from the requested names.
This matches what other templates do.

Fixes: 71ebc4d1b27d ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/chacha20poly1305.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/crypto/chacha20poly1305.c
+++ b/crypto/chacha20poly1305.c
@@ -647,8 +647,8 @@ static int chachapoly_create(struct cryp
 
 	err = -ENAMETOOLONG;
 	if (snprintf(inst->alg.base.cra_name, CRYPTO_MAX_ALG_NAME,
-		     "%s(%s,%s)", name, chacha_name,
-		     poly_name) >= CRYPTO_MAX_ALG_NAME)
+		     "%s(%s,%s)", name, chacha->base.cra_name,
+		     poly->cra_name) >= CRYPTO_MAX_ALG_NAME)
 		goto out_drop_chacha;
 	if (snprintf(inst->alg.base.cra_driver_name, CRYPTO_MAX_ALG_NAME,
 		     "%s(%s,%s)", name, chacha->base.cra_driver_name,



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 13/44] crypto: vmx - fix copy-paste error in CTR mode
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (11 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 12/44] crypto: chacha20poly1305 - set cra_name correctly Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 14/44] crypto: crct10dif-generic - fix use via crypto_shash_digest() Greg Kroah-Hartman
                   ` (34 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ondrej Mosnáček,
	Daniel Axtens, Michael Ellerman, Herbert Xu

From: Daniel Axtens <dja@axtens.net>

commit dcf7b48212c0fab7df69e84fab22d6cb7c8c0fb9 upstream.

The original assembly imported from OpenSSL has two copy-paste
errors in handling CTR mode. When dealing with a 2 or 3 block tail,
the code branches to the CBC decryption exit path, rather than to
the CTR exit path.

This leads to corruption of the IV, which leads to subsequent blocks
being corrupted.

This can be detected with libkcapi test suite, which is available at
https://github.com/smuellerDD/libkcapi

Reported-by: Ondrej Mosnáček <omosnacek@gmail.com>
Fixes: 5c380d623ed3 ("crypto: vmx - Add support for VMS instructions by ASM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/vmx/aesp8-ppc.pl |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/crypto/vmx/aesp8-ppc.pl
+++ b/drivers/crypto/vmx/aesp8-ppc.pl
@@ -1815,7 +1815,7 @@ Lctr32_enc8x_three:
 	stvx_u		$out1,$x10,$out
 	stvx_u		$out2,$x20,$out
 	addi		$out,$out,0x30
-	b		Lcbc_dec8x_done
+	b		Lctr32_enc8x_done
 
 .align	5
 Lctr32_enc8x_two:
@@ -1827,7 +1827,7 @@ Lctr32_enc8x_two:
 	stvx_u		$out0,$x00,$out
 	stvx_u		$out1,$x10,$out
 	addi		$out,$out,0x20
-	b		Lcbc_dec8x_done
+	b		Lctr32_enc8x_done
 
 .align	5
 Lctr32_enc8x_one:



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 14/44] crypto: crct10dif-generic - fix use via crypto_shash_digest()
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (12 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 13/44] crypto: vmx - fix copy-paste error in CTR mode Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 15/44] crypto: x86/crct10dif-pcl " Greg Kroah-Hartman
                   ` (33 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Tim Chen, Eric Biggers, Herbert Xu

From: Eric Biggers <ebiggers@google.com>

commit 307508d1072979f4435416f87936f87eaeb82054 upstream.

The ->digest() method of crct10dif-generic reads the current CRC value
from the shash_desc context.  But this value is uninitialized, causing
crypto_shash_digest() to compute the wrong result.  Fix it.

Probably this wasn't noticed before because lib/crc-t10dif.c only uses
crypto_shash_update(), not crypto_shash_digest().  Likewise,
crypto_shash_digest() is not yet tested by the crypto self-tests because
those only test the ahash API which only uses shash init/update/final.

This bug was detected by my patches that improve testmgr to fuzz
algorithms against their generic implementation.

Fixes: 2d31e518a428 ("crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework")
Cc: <stable@vger.kernel.org> # v3.11+
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/crct10dif_generic.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

--- a/crypto/crct10dif_generic.c
+++ b/crypto/crct10dif_generic.c
@@ -65,10 +65,9 @@ static int chksum_final(struct shash_des
 	return 0;
 }
 
-static int __chksum_finup(__u16 *crcp, const u8 *data, unsigned int len,
-			u8 *out)
+static int __chksum_finup(__u16 crc, const u8 *data, unsigned int len, u8 *out)
 {
-	*(__u16 *)out = crc_t10dif_generic(*crcp, data, len);
+	*(__u16 *)out = crc_t10dif_generic(crc, data, len);
 	return 0;
 }
 
@@ -77,15 +76,13 @@ static int chksum_finup(struct shash_des
 {
 	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	return __chksum_finup(&ctx->crc, data, len, out);
+	return __chksum_finup(ctx->crc, data, len, out);
 }
 
 static int chksum_digest(struct shash_desc *desc, const u8 *data,
 			 unsigned int length, u8 *out)
 {
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	return __chksum_finup(&ctx->crc, data, length, out);
+	return __chksum_finup(0, data, length, out);
 }
 
 static struct shash_alg alg = {



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 15/44] crypto: x86/crct10dif-pcl - fix use via crypto_shash_digest()
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (13 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 14/44] crypto: crct10dif-generic - fix use via crypto_shash_digest() Greg Kroah-Hartman
@ 2019-05-20 12:14 ` " Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 16/44] ALSA: usb-audio: Fix a memory leak bug Greg Kroah-Hartman
                   ` (32 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Tim Chen, Eric Biggers, Herbert Xu

From: Eric Biggers <ebiggers@google.com>

commit dec3d0b1071a0f3194e66a83d26ecf4aa8c5910e upstream.

The ->digest() method of crct10dif-pclmul reads the current CRC value
from the shash_desc context.  But this value is uninitialized, causing
crypto_shash_digest() to compute the wrong result.  Fix it.

Probably this wasn't noticed before because lib/crc-t10dif.c only uses
crypto_shash_update(), not crypto_shash_digest().  Likewise,
crypto_shash_digest() is not yet tested by the crypto self-tests because
those only test the ahash API which only uses shash init/update/final.

Fixes: 0b95a7f85718 ("crypto: crct10dif - Glue code to cast accelerated CRCT10DIF assembly as a crypto transform")
Cc: <stable@vger.kernel.org> # v3.11+
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/crct10dif-pclmul_glue.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

--- a/arch/x86/crypto/crct10dif-pclmul_glue.c
+++ b/arch/x86/crypto/crct10dif-pclmul_glue.c
@@ -76,15 +76,14 @@ static int chksum_final(struct shash_des
 	return 0;
 }
 
-static int __chksum_finup(__u16 *crcp, const u8 *data, unsigned int len,
-			u8 *out)
+static int __chksum_finup(__u16 crc, const u8 *data, unsigned int len, u8 *out)
 {
 	if (irq_fpu_usable()) {
 		kernel_fpu_begin();
-		*(__u16 *)out = crc_t10dif_pcl(*crcp, data, len);
+		*(__u16 *)out = crc_t10dif_pcl(crc, data, len);
 		kernel_fpu_end();
 	} else
-		*(__u16 *)out = crc_t10dif_generic(*crcp, data, len);
+		*(__u16 *)out = crc_t10dif_generic(crc, data, len);
 	return 0;
 }
 
@@ -93,15 +92,13 @@ static int chksum_finup(struct shash_des
 {
 	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	return __chksum_finup(&ctx->crc, data, len, out);
+	return __chksum_finup(ctx->crc, data, len, out);
 }
 
 static int chksum_digest(struct shash_desc *desc, const u8 *data,
 			 unsigned int length, u8 *out)
 {
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	return __chksum_finup(&ctx->crc, data, length, out);
+	return __chksum_finup(0, data, length, out);
 }
 
 static struct shash_alg alg = {



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 16/44] ALSA: usb-audio: Fix a memory leak bug
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (14 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 15/44] crypto: x86/crct10dif-pcl " Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 17/44] ALSA: hda/hdmi - Read the pin sense from register when repolling Greg Kroah-Hartman
                   ` (31 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wenwen Wang, Takashi Iwai

From: Wenwen Wang <wang6495@umn.edu>

commit cb5173594d50c72b7bfa14113dfc5084b4d2f726 upstream.

In parse_audio_selector_unit(), the string array 'namelist' is allocated
through kmalloc_array(), and each string pointer in this array, i.e.,
'namelist[]', is allocated through kmalloc() in the following for loop.
Then, a control instance 'kctl' is created by invoking snd_ctl_new1(). If
an error occurs during the creation process, the string array 'namelist',
including all string pointers in the array 'namelist[]', should be freed,
before the error code ENOMEM is returned. However, the current code does
not free 'namelist[]', resulting in memory leaks.

To fix the above issue, free all string pointers 'namelist[]' in a loop.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2178,6 +2178,8 @@ static int parse_audio_selector_unit(str
 	kctl = snd_ctl_new1(&mixer_selectunit_ctl, cval);
 	if (! kctl) {
 		usb_audio_err(state->chip, "cannot malloc kcontrol\n");
+		for (i = 0; i < desc->bNrInPins; i++)
+			kfree(namelist[i]);
 		kfree(namelist);
 		kfree(cval);
 		return -ENOMEM;



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 17/44] ALSA: hda/hdmi - Read the pin sense from register when repolling
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (15 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 16/44] ALSA: usb-audio: Fix a memory leak bug Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 18/44] ALSA: hda/hdmi - Consider eld_valid when reporting jack event Greg Kroah-Hartman
                   ` (30 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hui Wang, Takashi Iwai

From: Hui Wang <hui.wang@canonical.com>

commit 8c2e6728c2bf95765b724e07d0278ae97cd1ee0d upstream.

The driver will check the monitor presence when resuming from suspend,
starting poll or interrupt triggers. In these 3 situations, the
jack_dirty will be set to 1 first, then the hda_jack.c reads the
pin_sense from register, after reading the register, the jack_dirty
will be set to 0. But hdmi_repoll_work() is enabled in these 3
situations, It will read the pin_sense a couple of times subsequently,
since the jack_dirty is 0 now, It does not read the register anymore,
instead it uses the shadow pin_sense which is read at the first time.

It is meaningless to check the shadow pin_sense a couple of times,
we need to read the register to check the real plugging state, so
we set the jack_dirty to 1 in the hdmi_repoll_work().

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_hdmi.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1554,6 +1554,11 @@ static void hdmi_repoll_eld(struct work_
 	container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work);
 	struct hda_codec *codec = per_pin->codec;
 	struct hdmi_spec *spec = codec->spec;
+	struct hda_jack_tbl *jack;
+
+	jack = snd_hda_jack_tbl_get(codec, per_pin->pin_nid);
+	if (jack)
+		jack->jack_dirty = 1;
 
 	if (per_pin->repoll_count++ > 6)
 		per_pin->repoll_count = 0;



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 18/44] ALSA: hda/hdmi - Consider eld_valid when reporting jack event
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (16 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 17/44] ALSA: hda/hdmi - Read the pin sense from register when repolling Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 19/44] ALSA: hda/realtek - EAPD turn on later Greg Kroah-Hartman
                   ` (29 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hui Wang, Takashi Iwai

From: Hui Wang <hui.wang@canonical.com>

commit 7f641e26a6df9269cb25dd7a4b0a91d6586ed441 upstream.

On the machines with AMD GPU or Nvidia GPU, we often meet this issue:
after s3, there are 4 HDMI/DP audio devices in the gnome-sound-setting
even there is no any monitors plugged.

When this problem happens, we check the /proc/asound/cardX/eld#N.M, we
will find the monitor_present=1, eld_valid=0.

The root cause is BIOS or GPU driver makes the PRESENCE valid even no
monitor plugged, and of course the driver will not get the valid
eld_data subsequently.

In this situation, we should not report the jack_plugged event, to do
so, let us change the function hdmi_present_sense_via_verbs(). In this
function, it reads the pin_sense via snd_hda_pin_sense(), after
calling this function, the jack_dirty is 0, and before exiting
via_verbs(), we change the shadow pin_sense according to both
monitor_present and eld_valid, then in the snd_hda_jack_report_sync(),
since the jack_dirty is still 0, it will report jack event according
to this modified shadow pin_sense.

After this change, the driver will not report Jack_is_plugged event
through hdmi_present_sense_via_verbs() if monitor_present is 1 and
eld_valid is 0.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_hdmi.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1447,9 +1447,11 @@ static bool hdmi_present_sense_via_verbs
 	ret = !repoll || !eld->monitor_present || eld->eld_valid;
 
 	jack = snd_hda_jack_tbl_get(codec, pin_nid);
-	if (jack)
+	if (jack) {
 		jack->block_report = !ret;
-
+		jack->pin_sense = (eld->monitor_present && eld->eld_valid) ?
+			AC_PINSENSE_PRESENCE : 0;
+	}
 	mutex_unlock(&per_pin->lock);
 	return ret;
 }



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 19/44] ALSA: hda/realtek - EAPD turn on later
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (17 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 18/44] ALSA: hda/hdmi - Consider eld_valid when reporting jack event Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 20/44] ASoC: max98090: Fix restore of DAPM Muxes Greg Kroah-Hartman
                   ` (28 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kailang Yang, Takashi Iwai

From: Kailang Yang <kailang@realtek.com>

commit 607ca3bd220f4022e6f5356026b19dafc363863a upstream.

Let EAPD turn on after set pin output.

[ NOTE: This change is supposed to reduce the possible click noises at
  (runtime) PM resume.  The functionality should be same (i.e. the
  verbs are executed correctly) no matter which order is, so this
  should be safe to apply for all codecs -- tiwai ]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -773,11 +773,10 @@ static int alc_init(struct hda_codec *co
 	if (spec->init_hook)
 		spec->init_hook(codec);
 
+	snd_hda_gen_init(codec);
 	alc_fix_pll(codec);
 	alc_auto_init_amp(codec, spec->init_amp);
 
-	snd_hda_gen_init(codec);
-
 	snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_INIT);
 
 	return 0;



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 20/44] ASoC: max98090: Fix restore of DAPM Muxes
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (18 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 19/44] ALSA: hda/realtek - EAPD turn on later Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 21/44] ASoC: RT5677-SPI: Disable 16Bit SPI Transfers Greg Kroah-Hartman
                   ` (27 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jon Hunter, Mark Brown

From: Jon Hunter <jonathanh@nvidia.com>

commit ecb2795c08bc825ebd604997e5be440b060c5b18 upstream.

The max98090 driver defines 3 DAPM muxes; one for the right line output
(LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux)
and one for the right headphone mixer source (MIXHPRSEL Mux). The same
bit is used for the mux as well as the DAPM enable, and although the mux
can be correctly configured, after playback has completed, the mux will
be reset during the disable phase. This is preventing the state of these
muxes from being saved and restored correctly on system reboot. Fix this
by marking these muxes as SND_SOC_NOPM.

Note this has been verified this on the Tegra124 Nyan Big which features
the MAX98090 codec.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/max98090.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -1209,14 +1209,14 @@ static const struct snd_soc_dapm_widget
 		&max98090_right_rcv_mixer_controls[0],
 		ARRAY_SIZE(max98090_right_rcv_mixer_controls)),
 
-	SND_SOC_DAPM_MUX("LINMOD Mux", M98090_REG_LOUTR_MIXER,
-		M98090_LINMOD_SHIFT, 0, &max98090_linmod_mux),
+	SND_SOC_DAPM_MUX("LINMOD Mux", SND_SOC_NOPM, 0, 0,
+		&max98090_linmod_mux),
 
-	SND_SOC_DAPM_MUX("MIXHPLSEL Mux", M98090_REG_HP_CONTROL,
-		M98090_MIXHPLSEL_SHIFT, 0, &max98090_mixhplsel_mux),
+	SND_SOC_DAPM_MUX("MIXHPLSEL Mux", SND_SOC_NOPM, 0, 0,
+		&max98090_mixhplsel_mux),
 
-	SND_SOC_DAPM_MUX("MIXHPRSEL Mux", M98090_REG_HP_CONTROL,
-		M98090_MIXHPRSEL_SHIFT, 0, &max98090_mixhprsel_mux),
+	SND_SOC_DAPM_MUX("MIXHPRSEL Mux", SND_SOC_NOPM, 0, 0,
+		&max98090_mixhprsel_mux),
 
 	SND_SOC_DAPM_PGA("HP Left Out", M98090_REG_OUTPUT_ENABLE,
 		M98090_HPLEN_SHIFT, 0, NULL, 0),



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 21/44] ASoC: RT5677-SPI: Disable 16Bit SPI Transfers
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (19 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 20/44] ASoC: max98090: Fix restore of DAPM Muxes Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 22/44] mm/mincore.c: make mincore() more conservative Greg Kroah-Hartman
                   ` (26 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Curtis Malainey, Ben Zhang, Mark Brown

From: Curtis Malainey <cujomalainey@chromium.org>

commit a46eb523220e242affb9a6bc9bb8efc05f4f7459 upstream.

The current algorithm allows 3 types of transfers, 16bit, 32bit and
burst. According to Realtek, 16bit transfers have a special restriction
in that it is restricted to the memory region of
0x18020000 ~ 0x18021000. This region is the memory location of the I2C
registers. The current algorithm does not uphold this restriction and
therefore fails to complete writes.

Since this has been broken for some time it likely no one is using it.
Better to simply disable the 16 bit writes. This will allow users to
properly load firmware over SPI without data corruption.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/rt5677-spi.c |   35 ++++++++++++++++-------------------
 1 file changed, 16 insertions(+), 19 deletions(-)

--- a/sound/soc/codecs/rt5677-spi.c
+++ b/sound/soc/codecs/rt5677-spi.c
@@ -60,13 +60,15 @@ static DEFINE_MUTEX(spi_mutex);
  * RT5677_SPI_READ/WRITE_32:	Transfer 4 bytes
  * RT5677_SPI_READ/WRITE_BURST:	Transfer any multiples of 8 bytes
  *
- * For example, reading 260 bytes at 0x60030002 uses the following commands:
- * 0x60030002 RT5677_SPI_READ_16	2 bytes
+ * Note:
+ * 16 Bit writes and reads are restricted to the address range
+ * 0x18020000 ~ 0x18021000
+ *
+ * For example, reading 256 bytes at 0x60030004 uses the following commands:
  * 0x60030004 RT5677_SPI_READ_32	4 bytes
  * 0x60030008 RT5677_SPI_READ_BURST	240 bytes
  * 0x600300F8 RT5677_SPI_READ_BURST	8 bytes
  * 0x60030100 RT5677_SPI_READ_32	4 bytes
- * 0x60030104 RT5677_SPI_READ_16	2 bytes
  *
  * Input:
  * @read: true for read commands; false for write commands
@@ -81,15 +83,13 @@ static u8 rt5677_spi_select_cmd(bool rea
 {
 	u8 cmd;
 
-	if (align == 2 || align == 6 || remain == 2) {
-		cmd = RT5677_SPI_READ_16;
-		*len = 2;
-	} else if (align == 4 || remain <= 6) {
+	if (align == 4 || remain <= 4) {
 		cmd = RT5677_SPI_READ_32;
 		*len = 4;
 	} else {
 		cmd = RT5677_SPI_READ_BURST;
-		*len = min_t(u32, remain & ~7, RT5677_SPI_BURST_LEN);
+		*len = (((remain - 1) >> 3) + 1) << 3;
+		*len = min_t(u32, *len, RT5677_SPI_BURST_LEN);
 	}
 	return read ? cmd : cmd + 1;
 }
@@ -110,7 +110,7 @@ static void rt5677_spi_reverse(u8 *dst,
 	}
 }
 
-/* Read DSP address space using SPI. addr and len have to be 2-byte aligned. */
+/* Read DSP address space using SPI. addr and len have to be 4-byte aligned. */
 int rt5677_spi_read(u32 addr, void *rxbuf, size_t len)
 {
 	u32 offset;
@@ -126,7 +126,7 @@ int rt5677_spi_read(u32 addr, void *rxbu
 	if (!g_spi)
 		return -ENODEV;
 
-	if ((addr & 1) || (len & 1)) {
+	if ((addr & 3) || (len & 3)) {
 		dev_err(&g_spi->dev, "Bad read align 0x%x(%zu)\n", addr, len);
 		return -EACCES;
 	}
@@ -161,13 +161,13 @@ int rt5677_spi_read(u32 addr, void *rxbu
 }
 EXPORT_SYMBOL_GPL(rt5677_spi_read);
 
-/* Write DSP address space using SPI. addr has to be 2-byte aligned.
- * If len is not 2-byte aligned, an extra byte of zero is written at the end
+/* Write DSP address space using SPI. addr has to be 4-byte aligned.
+ * If len is not 4-byte aligned, then extra zeros are written at the end
  * as padding.
  */
 int rt5677_spi_write(u32 addr, const void *txbuf, size_t len)
 {
-	u32 offset, len_with_pad = len;
+	u32 offset;
 	int status = 0;
 	struct spi_transfer t;
 	struct spi_message m;
@@ -180,22 +180,19 @@ int rt5677_spi_write(u32 addr, const voi
 	if (!g_spi)
 		return -ENODEV;
 
-	if (addr & 1) {
+	if (addr & 3) {
 		dev_err(&g_spi->dev, "Bad write align 0x%x(%zu)\n", addr, len);
 		return -EACCES;
 	}
 
-	if (len & 1)
-		len_with_pad = len + 1;
-
 	memset(&t, 0, sizeof(t));
 	t.tx_buf = buf;
 	t.speed_hz = RT5677_SPI_FREQ;
 	spi_message_init_with_transfers(&m, &t, 1);
 
-	for (offset = 0; offset < len_with_pad;) {
+	for (offset = 0; offset < len;) {
 		spi_cmd = rt5677_spi_select_cmd(false, (addr + offset) & 7,
-				len_with_pad - offset, &t.len);
+				len - offset, &t.len);
 
 		/* Construct SPI message header */
 		buf[0] = spi_cmd;



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 22/44] mm/mincore.c: make mincore() more conservative
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (20 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 21/44] ASoC: RT5677-SPI: Disable 16Bit SPI Transfers Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 23/44] ocfs2: fix ocfs2 read inode data panic in ocfs2_iget Greg Kroah-Hartman
                   ` (25 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jiri Kosina, Vlastimil Babka,
	Josh Snyder, Michal Hocko, Andy Lutomirski, Dave Chinner,
	Kevin Easton, Matthew Wilcox, Cyril Hrubis, Tejun Heo,
	Kirill A. Shutemov, Daniel Gruss, Andrew Morton, Linus Torvalds,
	Dominique Martinet

From: Jiri Kosina <jkosina@suse.cz>

commit 134fca9063ad4851de767d1768180e5dede9a881 upstream.

The semantics of what mincore() considers to be resident is not
completely clear, but Linux has always (since 2.3.52, which is when
mincore() was initially done) treated it as "page is available in page
cache".

That's potentially a problem, as that [in]directly exposes
meta-information about pagecache / memory mapping state even about
memory not strictly belonging to the process executing the syscall,
opening possibilities for sidechannel attacks.

Change the semantics of mincore() so that it only reveals pagecache
information for non-anonymous mappings that belog to files that the
calling process could (if it tried to) successfully open for writing;
otherwise we'd be including shared non-exclusive mappings, which

 - is the sidechannel

 - is not the usecase for mincore(), as that's primarily used for data,
   not (shared) text

[jkosina@suse.cz: v2]
  Link: http://lkml.kernel.org/r/20190312141708.6652-2-vbabka@suse.cz
[mhocko@suse.com: restructure can_do_mincore() conditions]
Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1903062342020.19912@cbobk.fhfr.pm
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Josh Snyder <joshs@netflix.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Originally-by: Linus Torvalds <torvalds@linux-foundation.org>
Originally-by: Dominique Martinet <asmadeus@codewreck.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daniel Gruss <daniel@gruss.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mincore.c |   23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

--- a/mm/mincore.c
+++ b/mm/mincore.c
@@ -167,6 +167,22 @@ out:
 	return 0;
 }
 
+static inline bool can_do_mincore(struct vm_area_struct *vma)
+{
+	if (vma_is_anonymous(vma))
+		return true;
+	if (!vma->vm_file)
+		return false;
+	/*
+	 * Reveal pagecache information only for non-anonymous mappings that
+	 * correspond to the files the calling process could (if tried) open
+	 * for writing; otherwise we'd be including shared non-exclusive
+	 * mappings, which opens a side channel.
+	 */
+	return inode_owner_or_capable(file_inode(vma->vm_file)) ||
+		inode_permission(file_inode(vma->vm_file), MAY_WRITE) == 0;
+}
+
 /*
  * Do a chunk of "sys_mincore()". We've already checked
  * all the arguments, we hold the mmap semaphore: we should
@@ -187,8 +203,13 @@ static long do_mincore(unsigned long add
 	vma = find_vma(current->mm, addr);
 	if (!vma || addr < vma->vm_start)
 		return -ENOMEM;
-	mincore_walk.mm = vma->vm_mm;
 	end = min(vma->vm_end, addr + (pages << PAGE_SHIFT));
+	if (!can_do_mincore(vma)) {
+		unsigned long pages = DIV_ROUND_UP(end - addr, PAGE_SIZE);
+		memset(vec, 1, pages);
+		return pages;
+	}
+	mincore_walk.mm = vma->vm_mm;
 	err = walk_page_range(addr, end, &mincore_walk);
 	if (err < 0)
 		return err;



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 23/44] ocfs2: fix ocfs2 read inode data panic in ocfs2_iget
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (21 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 22/44] mm/mincore.c: make mincore() more conservative Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 24/44] mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L Greg Kroah-Hartman
                   ` (24 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Shuning Zhang, Joseph Qi,
	Mark Fasheh, Joel Becker, Junxiao Bi, Changwei Ge, piaojun,
	Gang He, Andrew Morton, Linus Torvalds

From: Shuning Zhang <sunny.s.zhang@oracle.com>

commit e091eab028f9253eac5c04f9141bbc9d170acab3 upstream.

In some cases, ocfs2_iget() reads the data of inode, which has been
deleted for some reason.  That will make the system panic.  So We should
judge whether this inode has been deleted, and tell the caller that the
inode is a bad inode.

For example, the ocfs2 is used as the backed of nfs, and the client is
nfsv3.  This issue can be reproduced by the following steps.

on the nfs server side,
..../patha/pathb

Step 1: The process A was scheduled before calling the function fh_verify.

Step 2: The process B is removing the 'pathb', and just completed the call
to function dput.  Then the dentry of 'pathb' has been deleted from the
dcache, and all ancestors have been deleted also.  The relationship of
dentry and inode was deleted through the function hlist_del_init.  The
following is the call stack.
dentry_iput->hlist_del_init(&dentry->d_u.d_alias)

At this time, the inode is still in the dcache.

Step 3: The process A call the function ocfs2_get_dentry, which get the
inode from dcache.  Then the refcount of inode is 1.  The following is the
call stack.
nfsd3_proc_getacl->fh_verify->exportfs_decode_fh->fh_to_dentry(ocfs2_get_dentry)

Step 4: Dirty pages are flushed by bdi threads.  So the inode of 'patha'
is evicted, and this directory was deleted.  But the inode of 'pathb'
can't be evicted, because the refcount of the inode was 1.

Step 5: The process A keep running, and call the function
reconnect_path(in exportfs_decode_fh), which call function
ocfs2_get_parent of ocfs2.  Get the block number of parent
directory(patha) by the name of ...  Then read the data from disk by the
block number.  But this inode has been deleted, so the system panic.

Process A                                             Process B
1. in nfsd3_proc_getacl                   |
2.                                        |        dput
3. fh_to_dentry(ocfs2_get_dentry)         |
4. bdi flush dirty cache                  |
5. ocfs2_iget                             |

[283465.542049] OCFS2: ERROR (device sdp): ocfs2_validate_inode_block:
Invalid dinode #580640: OCFS2_VALID_FL not set

[283465.545490] Kernel panic - not syncing: OCFS2: (device sdp): panic forced
after error

[283465.546889] CPU: 5 PID: 12416 Comm: nfsd Tainted: G        W
4.1.12-124.18.6.el6uek.bug28762940v3.x86_64 #2
[283465.548382] Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 09/21/2015
[283465.549657]  0000000000000000 ffff8800a56fb7b8 ffffffff816e839c
ffffffffa0514758
[283465.550392]  000000000008dc20 ffff8800a56fb838 ffffffff816e62d3
0000000000000008
[283465.551056]  ffff880000000010 ffff8800a56fb848 ffff8800a56fb7e8
ffff88005df9f000
[283465.551710] Call Trace:
[283465.552516]  [<ffffffff816e839c>] dump_stack+0x63/0x81
[283465.553291]  [<ffffffff816e62d3>] panic+0xcb/0x21b
[283465.554037]  [<ffffffffa04e66b0>] ocfs2_handle_error+0xf0/0xf0 [ocfs2]
[283465.554882]  [<ffffffffa04e7737>] __ocfs2_error+0x67/0x70 [ocfs2]
[283465.555768]  [<ffffffffa049c0f9>] ocfs2_validate_inode_block+0x229/0x230
[ocfs2]
[283465.556683]  [<ffffffffa047bcbc>] ocfs2_read_blocks+0x46c/0x7b0 [ocfs2]
[283465.557408]  [<ffffffffa049bed0>] ? ocfs2_inode_cache_io_unlock+0x20/0x20
[ocfs2]
[283465.557973]  [<ffffffffa049f0eb>] ocfs2_read_inode_block_full+0x3b/0x60
[ocfs2]
[283465.558525]  [<ffffffffa049f5ba>] ocfs2_iget+0x4aa/0x880 [ocfs2]
[283465.559082]  [<ffffffffa049146e>] ocfs2_get_parent+0x9e/0x220 [ocfs2]
[283465.559622]  [<ffffffff81297c05>] reconnect_path+0xb5/0x300
[283465.560156]  [<ffffffff81297f46>] exportfs_decode_fh+0xf6/0x2b0
[283465.560708]  [<ffffffffa062faf0>] ? nfsd_proc_getattr+0xa0/0xa0 [nfsd]
[283465.561262]  [<ffffffff810a8196>] ? prepare_creds+0x26/0x110
[283465.561932]  [<ffffffffa0630860>] fh_verify+0x350/0x660 [nfsd]
[283465.562862]  [<ffffffffa0637804>] ? nfsd_cache_lookup+0x44/0x630 [nfsd]
[283465.563697]  [<ffffffffa063a8b9>] nfsd3_proc_getattr+0x69/0xf0 [nfsd]
[283465.564510]  [<ffffffffa062cf60>] nfsd_dispatch+0xe0/0x290 [nfsd]
[283465.565358]  [<ffffffffa05eb892>] ? svc_tcp_adjust_wspace+0x12/0x30
[sunrpc]
[283465.566272]  [<ffffffffa05ea652>] svc_process_common+0x412/0x6a0 [sunrpc]
[283465.567155]  [<ffffffffa05eaa03>] svc_process+0x123/0x210 [sunrpc]
[283465.568020]  [<ffffffffa062c90f>] nfsd+0xff/0x170 [nfsd]
[283465.568962]  [<ffffffffa062c810>] ? nfsd_destroy+0x80/0x80 [nfsd]
[283465.570112]  [<ffffffff810a622b>] kthread+0xcb/0xf0
[283465.571099]  [<ffffffff810a6160>] ? kthread_create_on_node+0x180/0x180
[283465.572114]  [<ffffffff816f11b8>] ret_from_fork+0x58/0x90
[283465.573156]  [<ffffffff810a6160>] ? kthread_create_on_node+0x180/0x180

Link: http://lkml.kernel.org/r/1554185919-3010-1-git-send-email-sunny.s.zhang@oracle.com
Signed-off-by: Shuning Zhang <sunny.s.zhang@oracle.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: piaojun <piaojun@huawei.com>
Cc: "Gang He" <ghe@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ocfs2/export.c |   30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

--- a/fs/ocfs2/export.c
+++ b/fs/ocfs2/export.c
@@ -148,16 +148,24 @@ static struct dentry *ocfs2_get_parent(s
 	u64 blkno;
 	struct dentry *parent;
 	struct inode *dir = d_inode(child);
+	int set;
 
 	trace_ocfs2_get_parent(child, child->d_name.len, child->d_name.name,
 			       (unsigned long long)OCFS2_I(dir)->ip_blkno);
 
+	status = ocfs2_nfs_sync_lock(OCFS2_SB(dir->i_sb), 1);
+	if (status < 0) {
+		mlog(ML_ERROR, "getting nfs sync lock(EX) failed %d\n", status);
+		parent = ERR_PTR(status);
+		goto bail;
+	}
+
 	status = ocfs2_inode_lock(dir, NULL, 0);
 	if (status < 0) {
 		if (status != -ENOENT)
 			mlog_errno(status);
 		parent = ERR_PTR(status);
-		goto bail;
+		goto unlock_nfs_sync;
 	}
 
 	status = ocfs2_lookup_ino_from_name(dir, "..", 2, &blkno);
@@ -166,11 +174,31 @@ static struct dentry *ocfs2_get_parent(s
 		goto bail_unlock;
 	}
 
+	status = ocfs2_test_inode_bit(OCFS2_SB(dir->i_sb), blkno, &set);
+	if (status < 0) {
+		if (status == -EINVAL) {
+			status = -ESTALE;
+		} else
+			mlog(ML_ERROR, "test inode bit failed %d\n", status);
+		parent = ERR_PTR(status);
+		goto bail_unlock;
+	}
+
+	trace_ocfs2_get_dentry_test_bit(status, set);
+	if (!set) {
+		status = -ESTALE;
+		parent = ERR_PTR(status);
+		goto bail_unlock;
+	}
+
 	parent = d_obtain_alias(ocfs2_iget(OCFS2_SB(dir->i_sb), blkno, 0, 0));
 
 bail_unlock:
 	ocfs2_inode_unlock(dir, 0);
 
+unlock_nfs_sync:
+	ocfs2_nfs_sync_unlock(OCFS2_SB(dir->i_sb), 1);
+
 bail:
 	trace_ocfs2_get_parent_end(parent);
 



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 24/44] mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (22 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 23/44] ocfs2: fix ocfs2 read inode data panic in ocfs2_iget Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 25/44] mfd: max77620: Fix swapped FPS_PERIOD_MAX_US values Greg Kroah-Hartman
                   ` (23 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Steve Twiss, Lee Jones

From: Steve Twiss <stwiss.opensource@diasemi.com>

commit 6b4814a9451add06d457e198be418bf6a3e6a990 upstream.

Mismatch between what is found in the Datasheets for DA9063 and DA9063L
provided by Dialog Semiconductor, and the register names provided in the
MFD registers file. The changes are for the OTP (one-time-programming)
control registers. The two naming errors are OPT instead of OTP, and
COUNT instead of CONT (i.e. control).

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/mfd/da9063/registers.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/include/linux/mfd/da9063/registers.h
+++ b/include/linux/mfd/da9063/registers.h
@@ -215,9 +215,9 @@
 
 /* DA9063 Configuration registers */
 /* OTP */
-#define	DA9063_REG_OPT_COUNT		0x101
-#define	DA9063_REG_OPT_ADDR		0x102
-#define	DA9063_REG_OPT_DATA		0x103
+#define	DA9063_REG_OTP_CONT		0x101
+#define	DA9063_REG_OTP_ADDR		0x102
+#define	DA9063_REG_OTP_DATA		0x103
 
 /* Customer Trim and Configuration */
 #define	DA9063_REG_T_OFFSET		0x104



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 25/44] mfd: max77620: Fix swapped FPS_PERIOD_MAX_US values
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (23 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 24/44] mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 26/44] tty/vt: fix write/write race in ioctl(KDSKBSENT) handler Greg Kroah-Hartman
                   ` (22 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dmitry Osipenko, Lee Jones

From: Dmitry Osipenko <digetx@gmail.com>

commit ea611d1cc180fbb56982c83cd5142a2b34881f5c upstream.

The FPS_PERIOD_MAX_US definitions are swapped for MAX20024 and MAX77620,
fix it.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/mfd/max77620.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/linux/mfd/max77620.h
+++ b/include/linux/mfd/max77620.h
@@ -136,8 +136,8 @@
 #define MAX77620_FPS_PERIOD_MIN_US		40
 #define MAX20024_FPS_PERIOD_MIN_US		20
 
-#define MAX77620_FPS_PERIOD_MAX_US		2560
-#define MAX20024_FPS_PERIOD_MAX_US		5120
+#define MAX20024_FPS_PERIOD_MAX_US		2560
+#define MAX77620_FPS_PERIOD_MAX_US		5120
 
 #define MAX77620_REG_FPS_GPIO1			0x54
 #define MAX77620_REG_FPS_GPIO2			0x55



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 26/44] tty/vt: fix write/write race in ioctl(KDSKBSENT) handler
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (24 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 25/44] mfd: max77620: Fix swapped FPS_PERIOD_MAX_US values Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 27/44] jbd2: check superblock mapped prior to committing Greg Kroah-Hartman
                   ` (21 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jiri Slaby, Sergei Trofimovich

From: Sergei Trofimovich <slyfox@gentoo.org>

commit 46ca3f735f345c9d87383dd3a09fa5d43870770e upstream.

The bug manifests as an attempt to access deallocated memory:

    BUG: unable to handle kernel paging request at ffff9c8735448000
    #PF error: [PROT] [WRITE]
    PGD 288a05067 P4D 288a05067 PUD 288a07067 PMD 7f60c2063 PTE 80000007f5448161
    Oops: 0003 [#1] PREEMPT SMP
    CPU: 6 PID: 388 Comm: loadkeys Tainted: G         C        5.0.0-rc6-00153-g5ded5871030e #91
    Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M-D3H, BIOS F12 11/14/2013
    RIP: 0010:__memmove+0x81/0x1a0
    Code: 4c 89 4f 10 4c 89 47 18 48 8d 7f 20 73 d4 48 83 c2 20 e9 a2 00 00 00 66 90 48 89 d1 4c 8b 5c 16 f8 4c 8d 54 17 f8 48 c1 e9 03 <f3> 48 a5 4d 89 1a e9 0c 01 00 00 0f 1f 40 00 48 89 d1 4c 8b 1e 49
    RSP: 0018:ffffa1b9002d7d08 EFLAGS: 00010203
    RAX: ffff9c873541af43 RBX: ffff9c873541af43 RCX: 00000c6f105cd6bf
    RDX: 0000637882e986b6 RSI: ffff9c8735447ffb RDI: ffff9c8735447ffb
    RBP: ffff9c8739cd3800 R08: ffff9c873b802f00 R09: 00000000fffff73b
    R10: ffffffffb82b35f1 R11: 00505b1b004d5b1b R12: 0000000000000000
    R13: ffff9c873541af3d R14: 000000000000000b R15: 000000000000000c
    FS:  00007f450c390580(0000) GS:ffff9c873f180000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffff9c8735448000 CR3: 00000007e213c002 CR4: 00000000000606e0
    Call Trace:
     vt_do_kdgkb_ioctl+0x34d/0x440
     vt_ioctl+0xba3/0x1190
     ? __bpf_prog_run32+0x39/0x60
     ? mem_cgroup_commit_charge+0x7b/0x4e0
     tty_ioctl+0x23f/0x920
     ? preempt_count_sub+0x98/0xe0
     ? __seccomp_filter+0x67/0x600
     do_vfs_ioctl+0xa2/0x6a0
     ? syscall_trace_enter+0x192/0x2d0
     ksys_ioctl+0x3a/0x70
     __x64_sys_ioctl+0x16/0x20
     do_syscall_64+0x54/0xe0
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

The bug manifests on systemd systems with multiple vtcon devices:
  # cat /sys/devices/virtual/vtconsole/vtcon0/name
  (S) dummy device
  # cat /sys/devices/virtual/vtconsole/vtcon1/name
  (M) frame buffer device

There systemd runs 'loadkeys' tool in tapallel for each vtcon
instance. This causes two parallel ioctl(KDSKBSENT) calls to
race into adding the same entry into 'func_table' array at:

    drivers/tty/vt/keyboard.c:vt_do_kdgkb_ioctl()

The function has no locking around writes to 'func_table'.

The simplest reproducer is to have initrams with the following
init on a 8-CPU machine x86_64:

    #!/bin/sh

    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &

    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &
    wait

The change adds lock on write path only. Reads are still racy.

CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Jiri Slaby <jslaby@suse.com>
Link: https://lkml.org/lkml/2019/2/17/256
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/vt/keyboard.c |   33 +++++++++++++++++++++++++++------
 1 file changed, 27 insertions(+), 6 deletions(-)

--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -121,6 +121,7 @@ static const int NR_TYPES = ARRAY_SIZE(m
 static struct input_handler kbd_handler;
 static DEFINE_SPINLOCK(kbd_event_lock);
 static DEFINE_SPINLOCK(led_lock);
+static DEFINE_SPINLOCK(func_buf_lock); /* guard 'func_buf'  and friends */
 static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)];	/* keyboard key bitmap */
 static unsigned char shift_down[NR_SHIFT];		/* shift state counters.. */
 static bool dead_key_next;
@@ -1959,11 +1960,12 @@ int vt_do_kdgkb_ioctl(int cmd, struct kb
 	char *p;
 	u_char *q;
 	u_char __user *up;
-	int sz;
+	int sz, fnw_sz;
 	int delta;
 	char *first_free, *fj, *fnw;
 	int i, j, k;
 	int ret;
+	unsigned long flags;
 
 	if (!capable(CAP_SYS_TTY_CONFIG))
 		perm = 0;
@@ -2006,7 +2008,14 @@ int vt_do_kdgkb_ioctl(int cmd, struct kb
 			goto reterr;
 		}
 
+		fnw = NULL;
+		fnw_sz = 0;
+		/* race aginst other writers */
+		again:
+		spin_lock_irqsave(&func_buf_lock, flags);
 		q = func_table[i];
+
+		/* fj pointer to next entry after 'q' */
 		first_free = funcbufptr + (funcbufsize - funcbufleft);
 		for (j = i+1; j < MAX_NR_FUNC && !func_table[j]; j++)
 			;
@@ -2014,10 +2023,12 @@ int vt_do_kdgkb_ioctl(int cmd, struct kb
 			fj = func_table[j];
 		else
 			fj = first_free;
-
+		/* buffer usage increase by new entry */
 		delta = (q ? -strlen(q) : 1) + strlen(kbs->kb_string);
+
 		if (delta <= funcbufleft) { 	/* it fits in current buf */
 		    if (j < MAX_NR_FUNC) {
+			/* make enough space for new entry at 'fj' */
 			memmove(fj + delta, fj, first_free - fj);
 			for (k = j; k < MAX_NR_FUNC; k++)
 			    if (func_table[k])
@@ -2030,20 +2041,28 @@ int vt_do_kdgkb_ioctl(int cmd, struct kb
 		    sz = 256;
 		    while (sz < funcbufsize - funcbufleft + delta)
 		      sz <<= 1;
-		    fnw = kmalloc(sz, GFP_KERNEL);
-		    if(!fnw) {
-		      ret = -ENOMEM;
-		      goto reterr;
+		    if (fnw_sz != sz) {
+		      spin_unlock_irqrestore(&func_buf_lock, flags);
+		      kfree(fnw);
+		      fnw = kmalloc(sz, GFP_KERNEL);
+		      fnw_sz = sz;
+		      if (!fnw) {
+			ret = -ENOMEM;
+			goto reterr;
+		      }
+		      goto again;
 		    }
 
 		    if (!q)
 		      func_table[i] = fj;
+		    /* copy data before insertion point to new location */
 		    if (fj > funcbufptr)
 			memmove(fnw, funcbufptr, fj - funcbufptr);
 		    for (k = 0; k < j; k++)
 		      if (func_table[k])
 			func_table[k] = fnw + (func_table[k] - funcbufptr);
 
+		    /* copy data after insertion point to new location */
 		    if (first_free > fj) {
 			memmove(fnw + (fj - funcbufptr) + delta, fj, first_free - fj);
 			for (k = j; k < MAX_NR_FUNC; k++)
@@ -2056,7 +2075,9 @@ int vt_do_kdgkb_ioctl(int cmd, struct kb
 		    funcbufleft = funcbufleft - delta + sz - funcbufsize;
 		    funcbufsize = sz;
 		}
+		/* finally insert item itself */
 		strcpy(func_table[i], kbs->kb_string);
+		spin_unlock_irqrestore(&func_buf_lock, flags);
 		break;
 	}
 	ret = 0;



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 27/44] jbd2: check superblock mapped prior to committing
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (25 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 26/44] tty/vt: fix write/write race in ioctl(KDSKBSENT) handler Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 28/44] ext4: actually request zeroing of inode table after grow Greg Kroah-Hartman
                   ` (20 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Eric Ren, Jiufei Xue, Theodore Tso,
	Jan Kara, stable

From: Jiufei Xue <jiufei.xue@linux.alibaba.com>

commit 742b06b5628f2cd23cb51a034cb54dc33c6162c5 upstream.

We hit a BUG at fs/buffer.c:3057 if we detached the nbd device
before unmounting ext4 filesystem.

The typical chain of events leading to the BUG:
jbd2_write_superblock
  submit_bh
    submit_bh_wbc
      BUG_ON(!buffer_mapped(bh));

The block device is removed and all the pages are invalidated. JBD2
was trying to write journal superblock to the block device which is
no longer present.

Fix this by checking the journal superblock's buffer head prior to
submitting.

Reported-by: Eric Ren <renzhen@linux.alibaba.com>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/jbd2/journal.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1339,6 +1339,10 @@ static int jbd2_write_superblock(journal
 	journal_superblock_t *sb = journal->j_superblock;
 	int ret;
 
+	/* Buffer got discarded which means block device got invalidated */
+	if (!buffer_mapped(bh))
+		return -EIO;
+
 	trace_jbd2_write_superblock(journal, write_flags);
 	if (!(journal->j_flags & JBD2_BARRIER))
 		write_flags &= ~(REQ_FUA | REQ_PREFLUSH);



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 28/44] ext4: actually request zeroing of inode table after grow
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (26 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 27/44] jbd2: check superblock mapped prior to committing Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 29/44] ext4: fix ext4_show_options for file systems w/o journal Greg Kroah-Hartman
                   ` (19 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Kirill Tkhai, Theodore Tso, Jan Kara, stable

From: Kirill Tkhai <ktkhai@virtuozzo.com>

commit 310a997fd74de778b9a4848a64be9cda9f18764a upstream.

It is never possible, that number of block groups decreases,
since only online grow is supported.

But after a growing occured, we have to zero inode tables
for just created new block groups.

Fixes: 19c5246d2516 ("ext4: add new online resize interface")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -727,7 +727,7 @@ group_add_out:
 		if (err == 0)
 			err = err2;
 		mnt_drop_write_file(filp);
-		if (!err && (o_group > EXT4_SB(sb)->s_groups_count) &&
+		if (!err && (o_group < EXT4_SB(sb)->s_groups_count) &&
 		    ext4_has_group_desc_csum(sb) &&
 		    test_opt(sb, INIT_INODE_TABLE))
 			err = ext4_register_li_request(sb, o_group);



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 29/44] ext4: fix ext4_show_options for file systems w/o journal
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (27 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 28/44] ext4: actually request zeroing of inode table after grow Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 30/44] Btrfs: do not start a transaction at iterate_extent_inodes() Greg Kroah-Hartman
                   ` (18 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Debabrata Banerjee, Theodore Tso,
	Jan Kara, stable

From: Debabrata Banerjee <dbanerje@akamai.com>

commit 50b29d8f033a7c88c5bc011abc2068b1691ab755 upstream.

Instead of removing EXT4_MOUNT_JOURNAL_CHECKSUM from s_def_mount_opt as
I assume was intended, all other options were blown away leading to
_ext4_show_options() output being incorrect.

Fixes: 1e381f60dad9 ("ext4: do not allow journal_opts for fs w/o journal")
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4034,7 +4034,7 @@ static int ext4_fill_super(struct super_
 				 "data=, fs mounted w/o journal");
 			goto failed_mount_wq;
 		}
-		sbi->s_def_mount_opt &= EXT4_MOUNT_JOURNAL_CHECKSUM;
+		sbi->s_def_mount_opt &= ~EXT4_MOUNT_JOURNAL_CHECKSUM;
 		clear_opt(sb, JOURNAL_CHECKSUM);
 		clear_opt(sb, DATA_FLAGS);
 		sbi->s_journal = NULL;



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 30/44] Btrfs: do not start a transaction at iterate_extent_inodes()
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (28 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 29/44] ext4: fix ext4_show_options for file systems w/o journal Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 31/44] bcache: fix a race between cache register and cacheset unregister Greg Kroah-Hartman
                   ` (17 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Zygo Blaxell, Filipe Manana, David Sterba

From: Filipe Manana <fdmanana@suse.com>

commit bfc61c36260ca990937539cd648ede3cd749bc10 upstream.

When finding out which inodes have references on a particular extent, done
by backref.c:iterate_extent_inodes(), from the BTRFS_IOC_LOGICAL_INO (both
v1 and v2) ioctl and from scrub we use the transaction join API to grab a
reference on the currently running transaction, since in order to give
accurate results we need to inspect the delayed references of the currently
running transaction.

However, if there is currently no running transaction, the join operation
will create a new transaction. This is inefficient as the transaction will
eventually be committed, doing unnecessary IO and introducing a potential
point of failure that will lead to a transaction abort due to -ENOSPC, as
recently reported [1].

That's because the join, creates the transaction but does not reserve any
space, so when attempting to update the root item of the root passed to
btrfs_join_transaction(), during the transaction commit, we can end up
failling with -ENOSPC. Users of a join operation are supposed to actually
do some filesystem changes and reserve space by some means, which is not
the case of iterate_extent_inodes(), it is a read-only operation for all
contextes from which it is called.

The reported [1] -ENOSPC failure stack trace is the following:

 heisenberg kernel: ------------[ cut here ]------------
 heisenberg kernel: BTRFS: Transaction aborted (error -28)
 heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs]
(...)
 heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2
 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018
 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs]
(...)
 heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286
 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006
 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0
 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007
 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078
 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068
 heisenberg kernel: FS:  0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000
 heisenberg kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0
 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 heisenberg kernel: Call Trace:
 heisenberg kernel:  commit_fs_roots+0x166/0x1d0 [btrfs]
 heisenberg kernel:  ? _cond_resched+0x15/0x30
 heisenberg kernel:  ? btrfs_run_delayed_refs+0xac/0x180 [btrfs]
 heisenberg kernel:  btrfs_commit_transaction+0x2bd/0x870 [btrfs]
 heisenberg kernel:  ? start_transaction+0x9d/0x3f0 [btrfs]
 heisenberg kernel:  transaction_kthread+0x147/0x180 [btrfs]
 heisenberg kernel:  ? btrfs_cleanup_transaction+0x530/0x530 [btrfs]
 heisenberg kernel:  kthread+0x112/0x130
 heisenberg kernel:  ? kthread_bind+0x30/0x30
 heisenberg kernel:  ret_from_fork+0x35/0x40
 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]---

So fix that by using the attach API, which does not create a transaction
when there is currently no running transaction.

[1] https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/

Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/backref.c |   18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -2018,13 +2018,19 @@ int iterate_extent_inodes(struct btrfs_f
 			extent_item_objectid);
 
 	if (!search_commit_root) {
-		trans = btrfs_join_transaction(fs_info->extent_root);
-		if (IS_ERR(trans))
-			return PTR_ERR(trans);
+		trans = btrfs_attach_transaction(fs_info->extent_root);
+		if (IS_ERR(trans)) {
+			if (PTR_ERR(trans) != -ENOENT &&
+			    PTR_ERR(trans) != -EROFS)
+				return PTR_ERR(trans);
+			trans = NULL;
+		}
+	}
+
+	if (trans)
 		btrfs_get_tree_mod_seq(fs_info, &tree_mod_seq_elem);
-	} else {
+	else
 		down_read(&fs_info->commit_root_sem);
-	}
 
 	ret = btrfs_find_all_leafs(trans, fs_info, extent_item_objectid,
 				   tree_mod_seq_elem.seq, &refs,
@@ -2056,7 +2062,7 @@ int iterate_extent_inodes(struct btrfs_f
 
 	free_leaf_list(refs);
 out:
-	if (!search_commit_root) {
+	if (trans) {
 		btrfs_put_tree_mod_seq(fs_info, &tree_mod_seq_elem);
 		btrfs_end_transaction(trans, fs_info->extent_root);
 	} else {



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 31/44] bcache: fix a race between cache register and cacheset unregister
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (29 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 30/44] Btrfs: do not start a transaction at iterate_extent_inodes() Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 32/44] bcache: never set KEY_PTRS of journal key to 0 in journal_reclaim() Greg Kroah-Hartman
                   ` (16 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Liang Chen, Coly Li, Jens Axboe

From: Liang Chen <liangchen.linux@gmail.com>

commit a4b732a248d12cbdb46999daf0bf288c011335eb upstream.

There is a race between cache device register and cache set unregister.
For an already registered cache device, register_bcache will call
bch_is_open to iterate through all cachesets and check every cache
there. The race occurs if cache_set_free executes at the same time and
clears the caches right before ca is dereferenced in bch_is_open_cache.
To close the race, let's make sure the clean up work is protected by
the bch_register_lock as well.

This issue can be reproduced as follows,
while true; do echo /dev/XXX> /sys/fs/bcache/register ; done&
while true; do echo 1> /sys/block/XXX/bcache/set/unregister ; done &

and results in the following oops,

[  +0.000053] BUG: unable to handle kernel NULL pointer dereference at 0000000000000998
[  +0.000457] #PF error: [normal kernel read fault]
[  +0.000464] PGD 800000003ca9d067 P4D 800000003ca9d067 PUD 3ca9c067 PMD 0
[  +0.000388] Oops: 0000 [#1] SMP PTI
[  +0.000269] CPU: 1 PID: 3266 Comm: bash Not tainted 5.0.0+ #6
[  +0.000346] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014
[  +0.000472] RIP: 0010:register_bcache+0x1829/0x1990 [bcache]
[  +0.000344] Code: b0 48 83 e8 50 48 81 fa e0 e1 10 c0 0f 84 a9 00 00 00 48 89 c6 48 89 ca 0f b7 ba 54 04 00 00 4c 8b 82 60 0c 00 00 85 ff 74 2f <49> 3b a8 98 09 00 00 74 4e 44 8d 47 ff 31 ff 49 c1 e0 03 eb 0d
[  +0.000839] RSP: 0018:ffff92ee804cbd88 EFLAGS: 00010202
[  +0.000328] RAX: ffffffffc010e190 RBX: ffff918b5c6b5000 RCX: ffff918b7d8e0000
[  +0.000399] RDX: ffff918b7d8e0000 RSI: ffffffffc010e190 RDI: 0000000000000001
[  +0.000398] RBP: ffff918b7d318340 R08: 0000000000000000 R09: ffffffffb9bd2d7a
[  +0.000385] R10: ffff918b7eb253c0 R11: ffffb95980f51200 R12: ffffffffc010e1a0
[  +0.000411] R13: fffffffffffffff2 R14: 000000000000000b R15: ffff918b7e232620
[  +0.000384] FS:  00007f955bec2740(0000) GS:ffff918b7eb00000(0000) knlGS:0000000000000000
[  +0.000420] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000801] CR2: 0000000000000998 CR3: 000000003cad6000 CR4: 00000000001406e0
[  +0.000837] Call Trace:
[  +0.000682]  ? _cond_resched+0x10/0x20
[  +0.000691]  ? __kmalloc+0x131/0x1b0
[  +0.000710]  kernfs_fop_write+0xfa/0x170
[  +0.000733]  __vfs_write+0x2e/0x190
[  +0.000688]  ? inode_security+0x10/0x30
[  +0.000698]  ? selinux_file_permission+0xd2/0x120
[  +0.000752]  ? security_file_permission+0x2b/0x100
[  +0.000753]  vfs_write+0xa8/0x1a0
[  +0.000676]  ksys_write+0x4d/0xb0
[  +0.000699]  do_syscall_64+0x3a/0xf0
[  +0.000692]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/bcache/super.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1357,6 +1357,7 @@ static void cache_set_free(struct closur
 	bch_btree_cache_free(c);
 	bch_journal_free(c);
 
+	mutex_lock(&bch_register_lock);
 	for_each_cache(ca, c, i)
 		if (ca) {
 			ca->set = NULL;
@@ -1379,7 +1380,6 @@ static void cache_set_free(struct closur
 		mempool_destroy(c->search);
 	kfree(c->devices);
 
-	mutex_lock(&bch_register_lock);
 	list_del(&c->list);
 	mutex_unlock(&bch_register_lock);
 



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 32/44] bcache: never set KEY_PTRS of journal key to 0 in journal_reclaim()
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (30 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 31/44] bcache: fix a race between cache register and cacheset unregister Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 33/44] ipmi:ssif: compare block number correctly for multi-part return messages Greg Kroah-Hartman
                   ` (15 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Coly Li, Hannes Reinecke, Jens Axboe

From: Coly Li <colyli@suse.de>

commit 1bee2addc0c8470c8aaa65ef0599eeae96dd88bc upstream.

In journal_reclaim() ja->cur_idx of each cache will be update to
reclaim available journal buckets. Variable 'int n' is used to count how
many cache is successfully reclaimed, then n is set to c->journal.key
by SET_KEY_PTRS(). Later in journal_write_unlocked(), a for_each_cache()
loop will write the jset data onto each cache.

The problem is, if all jouranl buckets on each cache is full, the
following code in journal_reclaim(),

529 for_each_cache(ca, c, iter) {
530       struct journal_device *ja = &ca->journal;
531       unsigned int next = (ja->cur_idx + 1) % ca->sb.njournal_buckets;
532
533       /* No space available on this device */
534       if (next == ja->discard_idx)
535               continue;
536
537       ja->cur_idx = next;
538       k->ptr[n++] = MAKE_PTR(0,
539                         bucket_to_sector(c, ca->sb.d[ja->cur_idx]),
540                         ca->sb.nr_this_dev);
541 }
542
543 bkey_init(k);
544 SET_KEY_PTRS(k, n);

If there is no available bucket to reclaim, the if() condition at line
534 will always true, and n remains 0. Then at line 544, SET_KEY_PTRS()
will set KEY_PTRS field of c->journal.key to 0.

Setting KEY_PTRS field of c->journal.key to 0 is wrong. Because in
journal_write_unlocked() the journal data is written in following loop,

649	for (i = 0; i < KEY_PTRS(k); i++) {
650-671		submit journal data to cache device
672	}

If KEY_PTRS field is set to 0 in jouranl_reclaim(), the journal data
won't be written to cache device here. If system crahed or rebooted
before bkeys of the lost journal entries written into btree nodes, data
corruption will be reported during bcache reload after rebooting the
system.

Indeed there is only one cache in a cache set, there is no need to set
KEY_PTRS field in journal_reclaim() at all. But in order to keep the
for_each_cache() logic consistent for now, this patch fixes the above
problem by not setting 0 KEY_PTRS of journal key, if there is no bucket
available to reclaim.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/bcache/journal.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/drivers/md/bcache/journal.c
+++ b/drivers/md/bcache/journal.c
@@ -513,11 +513,11 @@ static void journal_reclaim(struct cache
 				  ca->sb.nr_this_dev);
 	}
 
-	bkey_init(k);
-	SET_KEY_PTRS(k, n);
-
-	if (n)
+	if (n) {
+		bkey_init(k);
+		SET_KEY_PTRS(k, n);
 		c->journal.blocks_free = c->sb.bucket_size >> c->block_bits;
+	}
 out:
 	if (!journal_full(&c->journal))
 		__closure_wake_up(&c->journal.wait);
@@ -642,6 +642,9 @@ static void journal_write_unlocked(struc
 		ca->journal.seq[ca->journal.cur_idx] = w->data->seq;
 	}
 
+	/* If KEY_PTRS(k) == 0, this jset gets lost in air */
+	BUG_ON(i == 0);
+
 	atomic_dec_bug(&fifo_back(&c->journal.pin));
 	bch_journal_next(&c->journal);
 	journal_reclaim(c);



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 33/44] ipmi:ssif: compare block number correctly for multi-part return messages
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (31 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 32/44] bcache: never set KEY_PTRS of journal key to 0 in journal_reclaim() Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 34/44] crypto: gcm - Fix error return code in crypto_gcm_create_common() Greg Kroah-Hartman
                   ` (14 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Kiran Kolukuluru, Kamlakant Patel,
	Corey Minyard

From: Kamlakant Patel <kamlakantp@marvell.com>

commit 55be8658c7e2feb11a5b5b33ee031791dbd23a69 upstream.

According to ipmi spec, block number is a number that is incremented,
starting with 0, for each new block of message data returned using the
middle transaction.

Here, the 'blocknum' is data[0] which always starts from zero(0) and
'ssif_info->multi_pos' starts from 1.
So, we need to add +1 to blocknum while comparing with multi_pos.

Fixes: 7d6380cd40f79 ("ipmi:ssif: Fix handling of multi-part return messages").
Reported-by: Kiran Kolukuluru <kirank@ami.com>
Signed-off-by: Kamlakant Patel <kamlakantp@marvell.com>
Message-Id: <1556106615-18722-1-git-send-email-kamlakantp@marvell.com>
[Also added a debug log if the block numbers don't match.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/ipmi/ipmi_ssif.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -699,12 +699,16 @@ static void msg_done_handler(struct ssif
 			/* End of read */
 			len = ssif_info->multi_len;
 			data = ssif_info->data;
-		} else if (blocknum != ssif_info->multi_pos) {
+		} else if (blocknum + 1 != ssif_info->multi_pos) {
 			/*
 			 * Out of sequence block, just abort.  Block
 			 * numbers start at zero for the second block,
 			 * but multi_pos starts at one, so the +1.
 			 */
+			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
+				dev_dbg(&ssif_info->client->dev,
+					"Received message out of sequence, expected %u, got %u\n",
+					ssif_info->multi_pos - 1, blocknum);
 			result = -EIO;
 		} else {
 			ssif_inc_stat(ssif_info, received_message_parts);



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 34/44] crypto: gcm - Fix error return code in crypto_gcm_create_common()
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (32 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 33/44] ipmi:ssif: compare block number correctly for multi-part return messages Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 35/44] crypto: gcm - fix incompatibility between "gcm" and "gcm_base" Greg Kroah-Hartman
                   ` (13 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wei Yongjun, Herbert Xu

From: Wei Yongjun <weiyongjun1@huawei.com>

commit 9b40f79c08e81234d759f188b233980d7e81df6c upstream.

Fix to return error code -EINVAL from the invalid alg ivsize error
handling case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/gcm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -670,11 +670,11 @@ static int crypto_gcm_create_common(stru
 	ctr = crypto_spawn_skcipher_alg(&ctx->ctr);
 
 	/* We only support 16-byte blocks. */
+	err = -EINVAL;
 	if (crypto_skcipher_alg_ivsize(ctr) != 16)
 		goto out_put_ctr;
 
 	/* Not a stream cipher? */
-	err = -EINVAL;
 	if (ctr->base.cra_blocksize != 1)
 		goto out_put_ctr;
 



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 35/44] crypto: gcm - fix incompatibility between "gcm" and "gcm_base"
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (33 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 34/44] crypto: gcm - Fix error return code in crypto_gcm_create_common() Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 36/44] crypto: salsa20 - dont access already-freed walk.iv Greg Kroah-Hartman
                   ` (12 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Eric Biggers, Herbert Xu

From: Eric Biggers <ebiggers@google.com>

commit f699594d436960160f6d5ba84ed4a222f20d11cd upstream.

GCM instances can be created by either the "gcm" template, which only
allows choosing the block cipher, e.g. "gcm(aes)"; or by "gcm_base",
which allows choosing the ctr and ghash implementations, e.g.
"gcm_base(ctr(aes-generic),ghash-generic)".

However, a "gcm_base" instance prevents a "gcm" instance from being
registered using the same implementations.  Nor will the instance be
found by lookups of "gcm".  This can be used as a denial of service.
Moreover, "gcm_base" instances are never tested by the crypto
self-tests, even if there are compatible "gcm" tests.

The root cause of these problems is that instances of the two templates
use different cra_names.  Therefore, fix these problems by making
"gcm_base" instances set the same cra_name as "gcm" instances, e.g.
"gcm(aes)" instead of "gcm_base(ctr(aes-generic),ghash-generic)".

This requires extracting the block cipher name from the name of the ctr
algorithm.  It also requires starting to verify that the algorithms are
really ctr and ghash, not something else entirely.  But it would be
bizarre if anyone were actually using non-gcm-compatible algorithms with
gcm_base, so this shouldn't break anyone in practice.

Fixes: d00aa19b507b ("[CRYPTO] gcm: Allow block cipher parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/gcm.c |   34 +++++++++++-----------------------
 1 file changed, 11 insertions(+), 23 deletions(-)

--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -616,7 +616,6 @@ static void crypto_gcm_free(struct aead_
 
 static int crypto_gcm_create_common(struct crypto_template *tmpl,
 				    struct rtattr **tb,
-				    const char *full_name,
 				    const char *ctr_name,
 				    const char *ghash_name)
 {
@@ -657,7 +656,8 @@ static int crypto_gcm_create_common(stru
 		goto err_free_inst;
 
 	err = -EINVAL;
-	if (ghash->digestsize != 16)
+	if (strcmp(ghash->base.cra_name, "ghash") != 0 ||
+	    ghash->digestsize != 16)
 		goto err_drop_ghash;
 
 	crypto_set_skcipher_spawn(&ctx->ctr, aead_crypto_instance(inst));
@@ -669,24 +669,24 @@ static int crypto_gcm_create_common(stru
 
 	ctr = crypto_spawn_skcipher_alg(&ctx->ctr);
 
-	/* We only support 16-byte blocks. */
+	/* The skcipher algorithm must be CTR mode, using 16-byte blocks. */
 	err = -EINVAL;
-	if (crypto_skcipher_alg_ivsize(ctr) != 16)
+	if (strncmp(ctr->base.cra_name, "ctr(", 4) != 0 ||
+	    crypto_skcipher_alg_ivsize(ctr) != 16 ||
+	    ctr->base.cra_blocksize != 1)
 		goto out_put_ctr;
 
-	/* Not a stream cipher? */
-	if (ctr->base.cra_blocksize != 1)
+	err = -ENAMETOOLONG;
+	if (snprintf(inst->alg.base.cra_name, CRYPTO_MAX_ALG_NAME,
+		     "gcm(%s", ctr->base.cra_name + 4) >= CRYPTO_MAX_ALG_NAME)
 		goto out_put_ctr;
 
-	err = -ENAMETOOLONG;
 	if (snprintf(inst->alg.base.cra_driver_name, CRYPTO_MAX_ALG_NAME,
 		     "gcm_base(%s,%s)", ctr->base.cra_driver_name,
 		     ghash_alg->cra_driver_name) >=
 	    CRYPTO_MAX_ALG_NAME)
 		goto out_put_ctr;
 
-	memcpy(inst->alg.base.cra_name, full_name, CRYPTO_MAX_ALG_NAME);
-
 	inst->alg.base.cra_flags = (ghash->base.cra_flags |
 				    ctr->base.cra_flags) & CRYPTO_ALG_ASYNC;
 	inst->alg.base.cra_priority = (ghash->base.cra_priority +
@@ -728,7 +728,6 @@ static int crypto_gcm_create(struct cryp
 {
 	const char *cipher_name;
 	char ctr_name[CRYPTO_MAX_ALG_NAME];
-	char full_name[CRYPTO_MAX_ALG_NAME];
 
 	cipher_name = crypto_attr_alg_name(tb[1]);
 	if (IS_ERR(cipher_name))
@@ -738,12 +737,7 @@ static int crypto_gcm_create(struct cryp
 	    CRYPTO_MAX_ALG_NAME)
 		return -ENAMETOOLONG;
 
-	if (snprintf(full_name, CRYPTO_MAX_ALG_NAME, "gcm(%s)", cipher_name) >=
-	    CRYPTO_MAX_ALG_NAME)
-		return -ENAMETOOLONG;
-
-	return crypto_gcm_create_common(tmpl, tb, full_name,
-					ctr_name, "ghash");
+	return crypto_gcm_create_common(tmpl, tb, ctr_name, "ghash");
 }
 
 static struct crypto_template crypto_gcm_tmpl = {
@@ -757,7 +751,6 @@ static int crypto_gcm_base_create(struct
 {
 	const char *ctr_name;
 	const char *ghash_name;
-	char full_name[CRYPTO_MAX_ALG_NAME];
 
 	ctr_name = crypto_attr_alg_name(tb[1]);
 	if (IS_ERR(ctr_name))
@@ -767,12 +760,7 @@ static int crypto_gcm_base_create(struct
 	if (IS_ERR(ghash_name))
 		return PTR_ERR(ghash_name);
 
-	if (snprintf(full_name, CRYPTO_MAX_ALG_NAME, "gcm_base(%s,%s)",
-		     ctr_name, ghash_name) >= CRYPTO_MAX_ALG_NAME)
-		return -ENAMETOOLONG;
-
-	return crypto_gcm_create_common(tmpl, tb, full_name,
-					ctr_name, ghash_name);
+	return crypto_gcm_create_common(tmpl, tb, ctr_name, ghash_name);
 }
 
 static struct crypto_template crypto_gcm_base_tmpl = {



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 36/44] crypto: salsa20 - dont access already-freed walk.iv
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (34 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 35/44] crypto: gcm - fix incompatibility between "gcm" and "gcm_base" Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 37/44] crypto: arm/aes-neonbs " Greg Kroah-Hartman
                   ` (11 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Eric Biggers, Herbert Xu

From: Eric Biggers <ebiggers@google.com>

commit edaf28e996af69222b2cb40455dbb5459c2b875a upstream.

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

salsa20-generic doesn't set an alignmask, so currently it isn't affected
by this despite unconditionally accessing walk.iv.  However this is more
subtle than desired, and it was actually broken prior to the alignmask
being removed by commit b62b3db76f73 ("crypto: salsa20-generic - cleanup
and convert to skcipher API").

Since salsa20-generic does not update the IV and does not need any IV
alignment, update it to use req->iv instead of walk.iv.

Fixes: 2407d60872dd ("[CRYPTO] salsa20: Salsa20 stream cipher")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 crypto/salsa20_generic.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/crypto/salsa20_generic.c
+++ b/crypto/salsa20_generic.c
@@ -186,7 +186,7 @@ static int encrypt(struct blkcipher_desc
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt_block(desc, &walk, 64);
 
-	salsa20_ivsetup(ctx, walk.iv);
+	salsa20_ivsetup(ctx, desc->info);
 
 	while (walk.nbytes >= 64) {
 		salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 37/44] crypto: arm/aes-neonbs - dont access already-freed walk.iv
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (35 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 36/44] crypto: salsa20 - dont access already-freed walk.iv Greg Kroah-Hartman
@ 2019-05-20 12:14 ` " Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 38/44] fib_rules: fix error in backport of e9919a24d302 ("fib_rules: return 0...") Greg Kroah-Hartman
                   ` (10 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Eric Biggers, Herbert Xu

From: Eric Biggers <ebiggers@google.com>

commit 767f015ea0b7ab9d60432ff6cd06b664fd71f50f upstream.

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

arm32 xts-aes-neonbs doesn't set an alignmask, so currently it isn't
affected by this despite unconditionally accessing walk.iv.  However
this is more subtle than desired, and it was actually broken prior to
the alignmask being removed by commit cc477bf64573 ("crypto: arm/aes -
replace bit-sliced OpenSSL NEON code").  Thus, update xts-aes-neonbs to
start checking the return value of skcipher_walk_virt().

Fixes: e4e7f10bfc40 ("ARM: add support for bit sliced AES using NEON instructions")
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/arm/crypto/aesbs-glue.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/arm/crypto/aesbs-glue.c
+++ b/arch/arm/crypto/aesbs-glue.c
@@ -265,6 +265,8 @@ static int aesbs_xts_encrypt(struct blkc
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
+	if (err)
+		return err;
 
 	/* generate the initial tweak */
 	AES_encrypt(walk.iv, walk.iv, &ctx->twkey);
@@ -289,6 +291,8 @@ static int aesbs_xts_decrypt(struct blkc
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE);
+	if (err)
+		return err;
 
 	/* generate the initial tweak */
 	AES_encrypt(walk.iv, walk.iv, &ctx->twkey);



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 38/44] fib_rules: fix error in backport of e9919a24d302 ("fib_rules: return 0...")
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (36 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 37/44] crypto: arm/aes-neonbs " Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 39/44] writeback: synchronize sync(2) against cgroup writeback membership switches Greg Kroah-Hartman
                   ` (9 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Nathan Chancellor, David Ahern,
	Florian Westphal, Hangbin Liu, David S. Miller

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When commit e9919a24d302 ("fib_rules: return 0 directly if an exactly
same rule exists when NLM_F_EXCL not supplied") was backported to 4.9.y,
it changed the logic a bit as err should have been reset before exiting
the test, like it happens in the original logic.

If this is not set, errors happen :(

Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: David Ahern <dsahern@gmail.com>
Reported-by: Florian Westphal <fw@strlen.de>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/fib_rules.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -430,6 +430,7 @@ int fib_nl_newrule(struct sk_buff *skb,
 		goto errout_free;
 
 	if (rule_exists(ops, frh, tb, rule)) {
+		err = 0;
 		if (nlh->nlmsg_flags & NLM_F_EXCL)
 			err = -EEXIST;
 		goto errout_free;



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 39/44] writeback: synchronize sync(2) against cgroup writeback membership switches
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (37 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 38/44] fib_rules: fix error in backport of e9919a24d302 ("fib_rules: return 0...") Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 40/44] fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount Greg Kroah-Hartman
                   ` (8 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Tejun Heo, Jiufei Xue, Jan Kara, Jens Axboe

From: Tejun Heo <tj@kernel.org>

commit 7fc5854f8c6efae9e7624970ab49a1eac2faefb1 upstream.

sync_inodes_sb() can race against cgwb (cgroup writeback) membership
switches and fail to writeback some inodes.  For example, if an inode
switches to another wb while sync_inodes_sb() is in progress, the new
wb might not be visible to bdi_split_work_to_wbs() at all or the inode
might jump from a wb which hasn't issued writebacks yet to one which
already has.

This patch adds backing_dev_info->wb_switch_rwsem to synchronize cgwb
switch path against sync_inodes_sb() so that sync_inodes_sb() is
guaranteed to see all the target wbs and inodes can't jump wbs to
escape syncing.

v2: Fixed misplaced rwsem init.  Spotted by Jiufei.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jiufei Xue <xuejiufei@gmail.com>
Link: http://lkml.kernel.org/r/dc694ae2-f07f-61e1-7097-7c8411cee12d@gmail.com
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fs-writeback.c                |   40 +++++++++++++++++++++++++++++++++++++--
 include/linux/backing-dev-defs.h |    1 
 mm/backing-dev.c                 |    1 
 3 files changed, 40 insertions(+), 2 deletions(-)

--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -331,11 +331,22 @@ struct inode_switch_wbs_context {
 	struct work_struct	work;
 };
 
+static void bdi_down_write_wb_switch_rwsem(struct backing_dev_info *bdi)
+{
+	down_write(&bdi->wb_switch_rwsem);
+}
+
+static void bdi_up_write_wb_switch_rwsem(struct backing_dev_info *bdi)
+{
+	up_write(&bdi->wb_switch_rwsem);
+}
+
 static void inode_switch_wbs_work_fn(struct work_struct *work)
 {
 	struct inode_switch_wbs_context *isw =
 		container_of(work, struct inode_switch_wbs_context, work);
 	struct inode *inode = isw->inode;
+	struct backing_dev_info *bdi = inode_to_bdi(inode);
 	struct address_space *mapping = inode->i_mapping;
 	struct bdi_writeback *old_wb = inode->i_wb;
 	struct bdi_writeback *new_wb = isw->new_wb;
@@ -344,6 +355,12 @@ static void inode_switch_wbs_work_fn(str
 	void **slot;
 
 	/*
+	 * If @inode switches cgwb membership while sync_inodes_sb() is
+	 * being issued, sync_inodes_sb() might miss it.  Synchronize.
+	 */
+	down_read(&bdi->wb_switch_rwsem);
+
+	/*
 	 * By the time control reaches here, RCU grace period has passed
 	 * since I_WB_SWITCH assertion and all wb stat update transactions
 	 * between unlocked_inode_to_wb_begin/end() are guaranteed to be
@@ -435,6 +452,8 @@ skip_switch:
 	spin_unlock(&new_wb->list_lock);
 	spin_unlock(&old_wb->list_lock);
 
+	up_read(&bdi->wb_switch_rwsem);
+
 	if (switched) {
 		wb_wakeup(new_wb);
 		wb_put(old_wb);
@@ -475,9 +494,18 @@ static void inode_switch_wbs(struct inod
 	if (inode->i_state & I_WB_SWITCH)
 		return;
 
+	/*
+	 * Avoid starting new switches while sync_inodes_sb() is in
+	 * progress.  Otherwise, if the down_write protected issue path
+	 * blocks heavily, we might end up starting a large number of
+	 * switches which will block on the rwsem.
+	 */
+	if (!down_read_trylock(&bdi->wb_switch_rwsem))
+		return;
+
 	isw = kzalloc(sizeof(*isw), GFP_ATOMIC);
 	if (!isw)
-		return;
+		goto out_unlock;
 
 	/* find and pin the new wb */
 	rcu_read_lock();
@@ -511,12 +539,14 @@ static void inode_switch_wbs(struct inod
 	 * Let's continue after I_WB_SWITCH is guaranteed to be visible.
 	 */
 	call_rcu(&isw->rcu_head, inode_switch_wbs_rcu_fn);
-	return;
+	goto out_unlock;
 
 out_free:
 	if (isw->new_wb)
 		wb_put(isw->new_wb);
 	kfree(isw);
+out_unlock:
+	up_read(&bdi->wb_switch_rwsem);
 }
 
 /**
@@ -894,6 +924,9 @@ fs_initcall(cgroup_writeback_init);
 
 #else	/* CONFIG_CGROUP_WRITEBACK */
 
+static void bdi_down_write_wb_switch_rwsem(struct backing_dev_info *bdi) { }
+static void bdi_up_write_wb_switch_rwsem(struct backing_dev_info *bdi) { }
+
 static struct bdi_writeback *
 locked_inode_to_wb_and_lock_list(struct inode *inode)
 	__releases(&inode->i_lock)
@@ -2408,8 +2441,11 @@ void sync_inodes_sb(struct super_block *
 		return;
 	WARN_ON(!rwsem_is_locked(&sb->s_umount));
 
+	/* protect against inode wb switch, see inode_switch_wbs_work_fn() */
+	bdi_down_write_wb_switch_rwsem(bdi);
 	bdi_split_work_to_wbs(bdi, &work, false);
 	wb_wait_for_completion(bdi, &done);
+	bdi_up_write_wb_switch_rwsem(bdi);
 
 	wait_sb_inodes(sb);
 }
--- a/include/linux/backing-dev-defs.h
+++ b/include/linux/backing-dev-defs.h
@@ -157,6 +157,7 @@ struct backing_dev_info {
 	struct radix_tree_root cgwb_tree; /* radix tree of active cgroup wbs */
 	struct rb_root cgwb_congested_tree; /* their congested states */
 	atomic_t usage_cnt; /* counts both cgwbs and cgwb_contested's */
+	struct rw_semaphore wb_switch_rwsem; /* no cgwb switch while syncing */
 #else
 	struct bdi_writeback_congested *wb_congested;
 #endif
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -669,6 +669,7 @@ static int cgwb_bdi_init(struct backing_
 	INIT_RADIX_TREE(&bdi->cgwb_tree, GFP_ATOMIC);
 	bdi->cgwb_congested_tree = RB_ROOT;
 	atomic_set(&bdi->usage_cnt, 1);
+	init_rwsem(&bdi->wb_switch_rwsem);
 
 	ret = wb_init(&bdi->wb, bdi, 1, GFP_KERNEL);
 	if (!ret) {



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 40/44] fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (38 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 39/44] writeback: synchronize sync(2) against cgroup writeback membership switches Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 41/44] ext4: zero out the unused memory region in the extent tree block Greg Kroah-Hartman
                   ` (7 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jiufei Xue, Tejun Heo, Andrew Morton,
	Linus Torvalds

From: Jiufei Xue <jiufei.xue@linux.alibaba.com>

commit ec084de929e419e51bcdafaafe567d9e7d0273b7 upstream.

synchronize_rcu() didn't wait for call_rcu() callbacks, so inode wb
switch may not go to the workqueue after synchronize_rcu().  Thus
previous scheduled switches was not finished even flushing the
workqueue, which will cause a NULL pointer dereferenced followed below.

  VFS: Busy inodes after unmount of vdd. Self-destruct in 5 seconds.  Have a nice day...
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000278
    evict+0xb3/0x180
    iput+0x1b0/0x230
    inode_switch_wbs_work_fn+0x3c0/0x6a0
    worker_thread+0x4e/0x490
    ? process_one_work+0x410/0x410
    kthread+0xe6/0x100
    ret_from_fork+0x39/0x50

Replace the synchronize_rcu() call with a rcu_barrier() to wait for all
pending callbacks to finish.  And inc isw_nr_in_flight after call_rcu()
in inode_switch_wbs() to make more sense.

Link: http://lkml.kernel.org/r/20190429024108.54150-1-jiufei.xue@linux.alibaba.com
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Acked-by: Tejun Heo <tj@kernel.org>
Suggested-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fs-writeback.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -530,8 +530,6 @@ static void inode_switch_wbs(struct inod
 
 	isw->inode = inode;
 
-	atomic_inc(&isw_nr_in_flight);
-
 	/*
 	 * In addition to synchronizing among switchers, I_WB_SWITCH tells
 	 * the RCU protected stat update paths to grab the mapping's
@@ -539,6 +537,9 @@ static void inode_switch_wbs(struct inod
 	 * Let's continue after I_WB_SWITCH is guaranteed to be visible.
 	 */
 	call_rcu(&isw->rcu_head, inode_switch_wbs_rcu_fn);
+
+	atomic_inc(&isw_nr_in_flight);
+
 	goto out_unlock;
 
 out_free:
@@ -908,7 +909,11 @@ restart:
 void cgroup_writeback_umount(void)
 {
 	if (atomic_read(&isw_nr_in_flight)) {
-		synchronize_rcu();
+		/*
+		 * Use rcu_barrier() to wait for all pending callbacks to
+		 * ensure that all in-flight wb switches are in the workqueue.
+		 */
+		rcu_barrier();
 		flush_workqueue(isw_wq);
 	}
 }



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 41/44] ext4: zero out the unused memory region in the extent tree block
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (39 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 40/44] fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 42/44] ext4: fix data corruption caused by overlapping unaligned and aligned IO Greg Kroah-Hartman
                   ` (6 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sriram Rajagopalan, Theodore Tso, stable

From: Sriram Rajagopalan <sriramr@arista.com>

commit 592acbf16821288ecdc4192c47e3774a4c48bb64 upstream.

This commit zeroes out the unused memory region in the buffer_head
corresponding to the extent metablock after writing the extent header
and the corresponding extent node entries.

This is done to prevent random uninitialized data from getting into
the filesystem when the extent block is synced.

This fixes CVE-2019-11833.

Signed-off-by: Sriram Rajagopalan <sriramr@arista.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/extents.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1047,6 +1047,7 @@ static int ext4_ext_split(handle_t *hand
 	__le32 border;
 	ext4_fsblk_t *ablocks = NULL; /* array of allocated blocks */
 	int err = 0;
+	size_t ext_size = 0;
 
 	/* make decision: where to split? */
 	/* FIXME: now decision is simplest: at current extent */
@@ -1138,6 +1139,10 @@ static int ext4_ext_split(handle_t *hand
 		le16_add_cpu(&neh->eh_entries, m);
 	}
 
+	/* zero out unused area in the extent block */
+	ext_size = sizeof(struct ext4_extent_header) +
+		sizeof(struct ext4_extent) * le16_to_cpu(neh->eh_entries);
+	memset(bh->b_data + ext_size, 0, inode->i_sb->s_blocksize - ext_size);
 	ext4_extent_block_csum_set(inode, neh);
 	set_buffer_uptodate(bh);
 	unlock_buffer(bh);
@@ -1217,6 +1222,11 @@ static int ext4_ext_split(handle_t *hand
 				sizeof(struct ext4_extent_idx) * m);
 			le16_add_cpu(&neh->eh_entries, m);
 		}
+		/* zero out unused area in the extent block */
+		ext_size = sizeof(struct ext4_extent_header) +
+		   (sizeof(struct ext4_extent) * le16_to_cpu(neh->eh_entries));
+		memset(bh->b_data + ext_size, 0,
+			inode->i_sb->s_blocksize - ext_size);
 		ext4_extent_block_csum_set(inode, neh);
 		set_buffer_uptodate(bh);
 		unlock_buffer(bh);
@@ -1282,6 +1292,7 @@ static int ext4_ext_grow_indepth(handle_
 	ext4_fsblk_t newblock, goal = 0;
 	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
 	int err = 0;
+	size_t ext_size = 0;
 
 	/* Try to prepend new index to old one */
 	if (ext_depth(inode))
@@ -1307,9 +1318,11 @@ static int ext4_ext_grow_indepth(handle_
 		goto out;
 	}
 
+	ext_size = sizeof(EXT4_I(inode)->i_data);
 	/* move top-level index/leaf into new block */
-	memmove(bh->b_data, EXT4_I(inode)->i_data,
-		sizeof(EXT4_I(inode)->i_data));
+	memmove(bh->b_data, EXT4_I(inode)->i_data, ext_size);
+	/* zero out unused area in the extent block */
+	memset(bh->b_data + ext_size, 0, inode->i_sb->s_blocksize - ext_size);
 
 	/* set size of new block */
 	neh = ext_block_hdr(bh);



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 42/44] ext4: fix data corruption caused by overlapping unaligned and aligned IO
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (40 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 41/44] ext4: zero out the unused memory region in the extent tree block Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 43/44] ALSA: hda/realtek - Fix for Lenovo B50-70 inverted internal microphone bug Greg Kroah-Hartman
                   ` (5 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Lukas Czerner, Theodore Tso, stable

From: Lukas Czerner <lczerner@redhat.com>

commit 57a0da28ced8707cb9f79f071a016b9d005caf5a upstream.

Unaligned AIO must be serialized because the zeroing of partial blocks
of unaligned AIO can result in data corruption in case it's overlapping
another in flight IO.

Currently we wait for all unwritten extents before we submit unaligned
AIO which protects data in case of unaligned AIO is following overlapping
IO. However if a unaligned AIO is followed by overlapping aligned AIO we
can still end up corrupting data.

To fix this, we must make sure that the unaligned AIO is the only IO in
flight by waiting for unwritten extents conversion not just before the
IO submission, but right after it as well.

This problem can be reproduced by xfstest generic/538

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/file.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -163,6 +163,13 @@ ext4_file_write_iter(struct kiocb *iocb,
 	}
 
 	ret = __generic_file_write_iter(iocb, from);
+	/*
+	 * Unaligned direct AIO must be the only IO in flight. Otherwise
+	 * overlapping aligned IO after unaligned might result in data
+	 * corruption.
+	 */
+	if (ret == -EIOCBQUEUED && unaligned_aio)
+		ext4_unwritten_wait(inode);
 	inode_unlock(inode);
 
 	if (ret > 0)



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 43/44] ALSA: hda/realtek - Fix for Lenovo B50-70 inverted internal microphone bug
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (41 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 42/44] ext4: fix data corruption caused by overlapping unaligned and aligned IO Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 12:14 ` [PATCH 4.9 44/44] KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes Greg Kroah-Hartman
                   ` (4 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Michał Wadowski, Takashi Iwai

From: Michał Wadowski <wadosm@gmail.com>

commit 56df90b631fc027fe28b70d41352d820797239bb upstream.

Add patch for realtek codec in Lenovo B50-70 that fixes inverted
internal microphone channel.
Device IdeaPad Y410P has the same PCI SSID as Lenovo B50-70,
but first one is about fix the noise and it didn't seem help in a
later kernel version.
So I replaced IdeaPad Y410P device description with B50-70 and apply
inverted microphone fix.

Bugzilla: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1524215
Signed-off-by: Michał Wadowski <wadosm@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5854,7 +5854,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x17aa, 0x3112, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
 	SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI),
 	SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC),
-	SND_PCI_QUIRK(0x17aa, 0x3978, "IdeaPad Y410P", ALC269_FIXUP_NO_SHUTUP),
+	SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI),
 	SND_PCI_QUIRK(0x17aa, 0x5013, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
 	SND_PCI_QUIRK(0x17aa, 0x501a, "Thinkpad", ALC283_FIXUP_INT_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x501e, "Thinkpad L440", ALC292_FIXUP_TPT440_DOCK),



^ permalink raw reply	[flat|nested] 50+ messages in thread

* [PATCH 4.9 44/44] KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (42 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 43/44] ALSA: hda/realtek - Fix for Lenovo B50-70 inverted internal microphone bug Greg Kroah-Hartman
@ 2019-05-20 12:14 ` Greg Kroah-Hartman
  2019-05-20 19:28 ` [PATCH 4.9 00/44] 4.9.178-stable review kernelci.org bot
                   ` (3 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-20 12:14 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sean Christopherson, Paolo Bonzini

From: Sean Christopherson <sean.j.christopherson@intel.com>

commit 11988499e62b310f3bf6f6d0a807a06d3f9ccc96 upstream.

KVM allows userspace to violate consistency checks related to the
guest's CPUID model to some degree.  Generally speaking, userspace has
carte blanche when it comes to guest state so long as jamming invalid
state won't negatively affect the host.

Currently this is seems to be a non-issue as most of the interesting
EFER checks are missing, e.g. NX and LME, but those will be added
shortly.  Proactively exempt userspace from the CPUID checks so as not
to break userspace.

Note, the efer_reserved_bits check still applies to userspace writes as
that mask reflects the host's capabilities, e.g. KVM shouldn't allow a
guest to run with NX=1 if it has been disabled in the host.

Fixes: d80174745ba39 ("KVM: SVM: Only allow setting of EFER_SVME when CPUID SVM is set")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |   33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1073,11 +1073,8 @@ static int do_get_msr_feature(struct kvm
 	return 0;
 }
 
-bool kvm_valid_efer(struct kvm_vcpu *vcpu, u64 efer)
+static bool __kvm_valid_efer(struct kvm_vcpu *vcpu, u64 efer)
 {
-	if (efer & efer_reserved_bits)
-		return false;
-
 	if (efer & EFER_FFXSR) {
 		struct kvm_cpuid_entry2 *feat;
 
@@ -1095,19 +1092,33 @@ bool kvm_valid_efer(struct kvm_vcpu *vcp
 	}
 
 	return true;
+
+}
+bool kvm_valid_efer(struct kvm_vcpu *vcpu, u64 efer)
+{
+	if (efer & efer_reserved_bits)
+		return false;
+
+	return __kvm_valid_efer(vcpu, efer);
 }
 EXPORT_SYMBOL_GPL(kvm_valid_efer);
 
-static int set_efer(struct kvm_vcpu *vcpu, u64 efer)
+static int set_efer(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 {
 	u64 old_efer = vcpu->arch.efer;
+	u64 efer = msr_info->data;
 
-	if (!kvm_valid_efer(vcpu, efer))
-		return 1;
+	if (efer & efer_reserved_bits)
+		return false;
 
-	if (is_paging(vcpu)
-	    && (vcpu->arch.efer & EFER_LME) != (efer & EFER_LME))
-		return 1;
+	if (!msr_info->host_initiated) {
+		if (!__kvm_valid_efer(vcpu, efer))
+			return 1;
+
+		if (is_paging(vcpu) &&
+		    (vcpu->arch.efer & EFER_LME) != (efer & EFER_LME))
+			return 1;
+	}
 
 	efer &= ~EFER_LMA;
 	efer |= vcpu->arch.efer & EFER_LMA;
@@ -2203,7 +2214,7 @@ int kvm_set_msr_common(struct kvm_vcpu *
 		vcpu->arch.arch_capabilities = data;
 		break;
 	case MSR_EFER:
-		return set_efer(vcpu, data);
+		return set_efer(vcpu, msr_info);
 	case MSR_K7_HWCR:
 		data &= ~(u64)0x40;	/* ignore flush filter disable */
 		data &= ~(u64)0x100;	/* ignore ignne emulation enable */



^ permalink raw reply	[flat|nested] 50+ messages in thread

* Re: [PATCH 4.9 00/44] 4.9.178-stable review
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (43 preceding siblings ...)
  2019-05-20 12:14 ` [PATCH 4.9 44/44] KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes Greg Kroah-Hartman
@ 2019-05-20 19:28 ` kernelci.org bot
  2019-05-21  8:51 ` Jon Hunter
                   ` (2 subsequent siblings)
  47 siblings, 0 replies; 50+ messages in thread
From: kernelci.org bot @ 2019-05-20 19:28 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
	ben.hutchings, lkft-triage, stable

stable-rc/linux-4.9.y boot: 94 boots: 1 failed, 91 passed with 1 offline, 1 conflict (v4.9.177-45-g1a569b62b013)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.177-45-g1a569b62b013/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.177-45-g1a569b62b013/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.177-45-g1a569b62b013
Git Commit: 1a569b62b013b75248598605647b0c077a399c5c
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 47 unique boards, 22 SoC families, 15 builds out of 197

Boot Regressions Detected:

arm:

    omap2plus_defconfig:
        gcc-8:
          omap4-panda:
              lab-baylibre: new failure (last pass: v4.9.177)

    qcom_defconfig:
        gcc-8:
          qcom-apq8064-cm-qs600:
              lab-baylibre-seattle: new failure (last pass: v4.9.177)

Boot Failure Detected:

arm:
    qcom_defconfig:
        gcc-8:
            qcom-apq8064-cm-qs600: 1 failed lab

Offline Platforms:

arm:

    multi_v7_defconfig:
        gcc-8
            stih410-b2120: 1 offline lab

Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)

arm:
    omap2plus_defconfig:
        omap4-panda:
            lab-baylibre: FAIL (gcc-8)
            lab-baylibre-seattle: PASS (gcc-8)

---
For more info write to <info@kernelci.org>

^ permalink raw reply	[flat|nested] 50+ messages in thread

* Re: [PATCH 4.9 00/44] 4.9.178-stable review
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (44 preceding siblings ...)
  2019-05-20 19:28 ` [PATCH 4.9 00/44] 4.9.178-stable review kernelci.org bot
@ 2019-05-21  8:51 ` Jon Hunter
  2019-05-21 10:34 ` Naresh Kamboju
  2019-05-21 21:39 ` shuah
  47 siblings, 0 replies; 50+ messages in thread
From: Jon Hunter @ 2019-05-21  8:51 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, linux, shuah, patches, ben.hutchings,
	lkft-triage, stable, linux-tegra


On 20/05/2019 13:13, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.178 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed 22 May 2019 11:50:58 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.178-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.9.178-rc1-g1a569b6
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

^ permalink raw reply	[flat|nested] 50+ messages in thread

* Re: [PATCH 4.9 00/44] 4.9.178-stable review
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (45 preceding siblings ...)
  2019-05-21  8:51 ` Jon Hunter
@ 2019-05-21 10:34 ` Naresh Kamboju
  2019-05-21 16:46   ` Greg Kroah-Hartman
  2019-05-21 21:39 ` shuah
  47 siblings, 1 reply; 50+ messages in thread
From: Naresh Kamboju @ 2019-05-21 10:34 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
	Shuah Khan, patches, Ben Hutchings, lkft-triage, linux- stable

On Mon, 20 May 2019 at 17:47, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.178 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 22 May 2019 11:50:58 AM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.178-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.9.178-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 1a569b62b013b75248598605647b0c077a399c5c
git describe: v4.9.177-45-g1a569b62b013
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.177-45-g1a569b62b013

No regressions (compared to build v4.9.177)

No fixes (compared to build v4.9.177)

Ran 23360 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-open-posix-tests
* prep-tmp-disk
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite

-- 
Linaro LKFT
https://lkft.linaro.org

^ permalink raw reply	[flat|nested] 50+ messages in thread

* Re: [PATCH 4.9 00/44] 4.9.178-stable review
  2019-05-21 10:34 ` Naresh Kamboju
@ 2019-05-21 16:46   ` Greg Kroah-Hartman
  0 siblings, 0 replies; 50+ messages in thread
From: Greg Kroah-Hartman @ 2019-05-21 16:46 UTC (permalink / raw)
  To: Naresh Kamboju
  Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
	Shuah Khan, patches, Ben Hutchings, lkft-triage, linux- stable

On Tue, May 21, 2019 at 04:04:35PM +0530, Naresh Kamboju wrote:
> On Mon, 20 May 2019 at 17:47, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 4.9.178 release.
> > There are 44 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed 22 May 2019 11:50:58 AM UTC.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.178-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.

Thanks for testing this one, and all of the others.

greg k-h

^ permalink raw reply	[flat|nested] 50+ messages in thread

* Re: [PATCH 4.9 00/44] 4.9.178-stable review
  2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
                   ` (46 preceding siblings ...)
  2019-05-21 10:34 ` Naresh Kamboju
@ 2019-05-21 21:39 ` shuah
  47 siblings, 0 replies; 50+ messages in thread
From: shuah @ 2019-05-21 21:39 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, linux, patches, ben.hutchings, lkft-triage,
	stable, shuah

On 5/20/19 6:13 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.178 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed 22 May 2019 11:50:58 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.178-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah


^ permalink raw reply	[flat|nested] 50+ messages in thread

end of thread, back to index

Thread overview: 50+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-20 12:13 [PATCH 4.9 00/44] 4.9.178-stable review Greg Kroah-Hartman
2019-05-20 12:13 ` [PATCH 4.9 01/44] net: core: another layer of lists, around PF_MEMALLOC skb handling Greg Kroah-Hartman
2019-05-20 12:13 ` [PATCH 4.9 02/44] locking/rwsem: Prevent decrement of reader count before increment Greg Kroah-Hartman
2019-05-20 12:13 ` [PATCH 4.9 03/44] PCI: hv: Fix a memory leak in hv_eject_device_work() Greg Kroah-Hartman
2019-05-20 12:13 ` [PATCH 4.9 04/44] x86/speculation/mds: Revert CPU buffer clear on double fault exit Greg Kroah-Hartman
2019-05-20 12:13 ` [PATCH 4.9 05/44] x86/speculation/mds: Improve CPU buffer clear documentation Greg Kroah-Hartman
2019-05-20 12:13 ` [PATCH 4.9 06/44] objtool: Fix function fallthrough detection Greg Kroah-Hartman
2019-05-20 12:13 ` [PATCH 4.9 07/44] ARM: exynos: Fix a leaked reference by adding missing of_node_put Greg Kroah-Hartman
2019-05-20 12:13 ` [PATCH 4.9 08/44] power: supply: axp288_charger: Fix unchecked return value Greg Kroah-Hartman
2019-05-20 12:13 ` [PATCH 4.9 09/44] arm64: compat: Reduce address limit Greg Kroah-Hartman
2019-05-20 12:13 ` [PATCH 4.9 10/44] arm64: Clear OSDLR_EL1 on CPU boot Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 11/44] sched/x86: Save [ER]FLAGS on context switch Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 12/44] crypto: chacha20poly1305 - set cra_name correctly Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 13/44] crypto: vmx - fix copy-paste error in CTR mode Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 14/44] crypto: crct10dif-generic - fix use via crypto_shash_digest() Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 15/44] crypto: x86/crct10dif-pcl " Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 16/44] ALSA: usb-audio: Fix a memory leak bug Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 17/44] ALSA: hda/hdmi - Read the pin sense from register when repolling Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 18/44] ALSA: hda/hdmi - Consider eld_valid when reporting jack event Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 19/44] ALSA: hda/realtek - EAPD turn on later Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 20/44] ASoC: max98090: Fix restore of DAPM Muxes Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 21/44] ASoC: RT5677-SPI: Disable 16Bit SPI Transfers Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 22/44] mm/mincore.c: make mincore() more conservative Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 23/44] ocfs2: fix ocfs2 read inode data panic in ocfs2_iget Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 24/44] mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 25/44] mfd: max77620: Fix swapped FPS_PERIOD_MAX_US values Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 26/44] tty/vt: fix write/write race in ioctl(KDSKBSENT) handler Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 27/44] jbd2: check superblock mapped prior to committing Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 28/44] ext4: actually request zeroing of inode table after grow Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 29/44] ext4: fix ext4_show_options for file systems w/o journal Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 30/44] Btrfs: do not start a transaction at iterate_extent_inodes() Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 31/44] bcache: fix a race between cache register and cacheset unregister Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 32/44] bcache: never set KEY_PTRS of journal key to 0 in journal_reclaim() Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 33/44] ipmi:ssif: compare block number correctly for multi-part return messages Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 34/44] crypto: gcm - Fix error return code in crypto_gcm_create_common() Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 35/44] crypto: gcm - fix incompatibility between "gcm" and "gcm_base" Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 36/44] crypto: salsa20 - dont access already-freed walk.iv Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 37/44] crypto: arm/aes-neonbs " Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 38/44] fib_rules: fix error in backport of e9919a24d302 ("fib_rules: return 0...") Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 39/44] writeback: synchronize sync(2) against cgroup writeback membership switches Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 40/44] fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 41/44] ext4: zero out the unused memory region in the extent tree block Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 42/44] ext4: fix data corruption caused by overlapping unaligned and aligned IO Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 43/44] ALSA: hda/realtek - Fix for Lenovo B50-70 inverted internal microphone bug Greg Kroah-Hartman
2019-05-20 12:14 ` [PATCH 4.9 44/44] KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes Greg Kroah-Hartman
2019-05-20 19:28 ` [PATCH 4.9 00/44] 4.9.178-stable review kernelci.org bot
2019-05-21  8:51 ` Jon Hunter
2019-05-21 10:34 ` Naresh Kamboju
2019-05-21 16:46   ` Greg Kroah-Hartman
2019-05-21 21:39 ` shuah

Stable Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://lore.kernel.org/stable \
		stable@vger.kernel.org stable@archiver.kernel.org
	public-inbox-index stable


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.stable


AGPL code for this site: git clone https://public-inbox.org/ public-inbox