Linux maintainer tooling and workflows
 help / color / Atom feed
* b4 picks up Phone: "header" from after the "-- " separator
@ 2021-07-19 21:35 Uwe Kleine-König
  0 siblings, 0 replies; only message in thread
From: Uwe Kleine-König @ 2021-07-19 21:35 UTC (permalink / raw)
  To: tools; +Cc: Marek Vasut, Stefan Roese, Mark Brown

[-- Attachment #1: Type: text/plain, Size: 788 bytes --]


I just noticed that 

	b4 am
	git am ./20210718_marex_spi_imx_mx51_ecspi_fix_low_speed_configreg_delay_calculation.mbx

adds the following line in the s-o-b area:

	Phone: (+49)-8142-66989-56 Email:

. This originates from Marek's reply that can be found at

The same already happend here:

I think it would be sensible to not pick up anything from after the "-- "

Best regards

Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-19 21:35 b4 picks up Phone: "header" from after the "-- " separator Uwe Kleine-König

Linux maintainer tooling and workflows

Archives are clonable:
	git clone --mirror tools/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 tools tools/ \
	public-inbox-index tools

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone