tpmdd-devel.lists.sourceforge.net archive mirror
 help / color / mirror / Atom feed
From: Peter Huewe <peter.huewe-d0qZbvYSIPpWk0Htik3J/w@public.gmane.org>
To: tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Peter Huewe <peter.huewe-d0qZbvYSIPpWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v2 4/5] tpm_tis_spi: Remove limitation of transfers to MAX_SPI_FRAMESIZE bytes
Date: Thu, 2 Mar 2017 13:03:14 +0000	[thread overview]
Message-ID: <1488459879-24349-5-git-send-email-peter.huewe@infineon.com> (raw)
In-Reply-To: <1488459879-24349-1-git-send-email-peter.huewe-d0qZbvYSIPpWk0Htik3J/w@public.gmane.org>

Limiting transfers to MAX_SPI_FRAMESIZE was not expected by the upper
layers, as tpm_tis has no such limitation. Add a loop to hide that
limitation.

v2: Moved scope of spi_message to the top as requested by Jarkko
Cc: <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen-d0qZbvYSIPpWk0Htik3J/w@public.gmane.org>
Signed-off-by: Peter Huewe <peter.huewe-d0qZbvYSIPpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Tested-by: Benoit Houyere <benoit.houyere-qxv4g6HH51o@public.gmane.org>
---
 drivers/char/tpm/tpm_tis_spi.c | 107 ++++++++++++++++++++++-------------------
 1 file changed, 58 insertions(+), 49 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_spi.c b/drivers/char/tpm/tpm_tis_spi.c
index 62f50b6c9ef6..3015c8b65f18 100644
--- a/drivers/char/tpm/tpm_tis_spi.c
+++ b/drivers/char/tpm/tpm_tis_spi.c
@@ -60,67 +60,76 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 				u8 *buffer, u8 direction)
 {
 	struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
-	int ret, i;
+	int ret = 0;
+	int i;
 	struct spi_message m;
-	struct spi_transfer spi_xfer = {
-		.tx_buf = phy->tx_buf,
-		.rx_buf = phy->rx_buf,
-		.len = 4,
-		.cs_change = 1,
-	};
-
-	if (len > MAX_SPI_FRAMESIZE)
-		return -ENOMEM;
+	struct spi_transfer spi_xfer;
+	u8 transfer_len;
 
-	phy->tx_buf[0] = direction | (len - 1);
-	phy->tx_buf[1] = 0xd4;
-	phy->tx_buf[2] = addr >> 8;
-	phy->tx_buf[3] = addr;
+	spi_bus_lock(phy->spi_device->master);
 
-	spi_message_init(&m);
-	spi_message_add_tail(&spi_xfer, &m);
+	while (len) {
+		transfer_len = min_t(u16, len, MAX_SPI_FRAMESIZE);
 
-	spi_bus_lock(phy->spi_device->master);
-	ret = spi_sync_locked(phy->spi_device, &m);
-	if (ret < 0)
-		goto exit;
-
-	if ((phy->rx_buf[3] & 0x01) == 0) {
-		// handle SPI wait states
-		phy->tx_buf[0] = 0;
-
-		for (i = 0; i < TPM_RETRY; i++) {
-			spi_xfer.len = 1;
-			spi_message_init(&m);
-			spi_message_add_tail(&spi_xfer, &m);
-			ret = spi_sync_locked(phy->spi_device, &m);
-			if (ret < 0)
+		phy->tx_buf[0] = direction | (transfer_len - 1);
+		phy->tx_buf[1] = 0xd4;
+		phy->tx_buf[2] = addr >> 8;
+		phy->tx_buf[3] = addr;
+
+		memset(&spi_xfer, 0, sizeof(spi_xfer));
+		spi_xfer.tx_buf = phy->tx_buf;
+		spi_xfer.rx_buf = phy->rx_buf;
+		spi_xfer.len = 4;
+		spi_xfer.cs_change = 1;
+
+		spi_message_init(&m);
+		spi_message_add_tail(&spi_xfer, &m);
+		ret = spi_sync_locked(phy->spi_device, &m);
+		if (ret < 0)
+			goto exit;
+
+		if ((phy->rx_buf[3] & 0x01) == 0) {
+			// handle SPI wait states
+			phy->tx_buf[0] = 0;
+
+			for (i = 0; i < TPM_RETRY; i++) {
+				spi_xfer.len = 1;
+				spi_message_init(&m);
+				spi_message_add_tail(&spi_xfer, &m);
+				ret = spi_sync_locked(phy->spi_device, &m);
+				if (ret < 0)
+					goto exit;
+				if (phy->rx_buf[0] & 0x01)
+					break;
+			}
+
+			if (i == TPM_RETRY) {
+				ret = -ETIMEDOUT;
 				goto exit;
-			if (phy->rx_buf[0] & 0x01)
-				break;
+			}
 		}
 
-		if (i == TPM_RETRY) {
-			ret = -ETIMEDOUT;
-			goto exit;
+		spi_xfer.cs_change = 0;
+		spi_xfer.len = transfer_len;
+
+		if (direction) {
+			spi_xfer.tx_buf = NULL;
+			spi_xfer.rx_buf = buffer;
+		} else {
+			spi_xfer.tx_buf = buffer;
+			spi_xfer.rx_buf = NULL;
 		}
-	}
 
-	spi_xfer.cs_change = 0;
-	spi_xfer.len = len;
+		spi_message_init(&m);
+		spi_message_add_tail(&spi_xfer, &m);
+		ret = spi_sync_locked(phy->spi_device, &m);
+		if (ret < 0)
+			goto exit;
 
-	if (direction) {
-		spi_xfer.tx_buf = NULL;
-		spi_xfer.rx_buf = buffer;
-	} else {
-		spi_xfer.tx_buf = buffer;
-		spi_xfer.rx_buf = NULL;
+		len -= transfer_len;
+		buffer += transfer_len;
 	}
 
-	spi_message_init(&m);
-	spi_message_add_tail(&spi_xfer, &m);
-	ret = spi_sync_locked(phy->spi_device, &m);
-
 exit:
 	spi_bus_unlock(phy->spi_device->master);
 	return ret;
-- 
2.7.4


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

  parent reply	other threads:[~2017-03-02 13:03 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-02 13:03 [PATCH v2 0/5] Fix whole native SPI TPM driver Peter Huewe
     [not found] ` <1488459879-24349-1-git-send-email-peter.huewe-d0qZbvYSIPpWk0Htik3J/w@public.gmane.org>
2017-03-02 13:03   ` [PATCH v2 1/5] tpm_tis_spi: Use single function to transfer data Peter Huewe
2017-03-02 13:03   ` [PATCH v2 2/5] tpm_tis_spi: Abort transfer when too many wait states are signaled Peter Huewe
2017-03-02 13:03   ` [PATCH v2 3/5] tpm_tis_spi: Check correct byte for wait state indicator Peter Huewe
2017-03-02 13:03   ` Peter Huewe [this message]
2017-03-02 13:03   ` [PATCH v2 5/5] tpm_tis_spi: Add small delay after last transfer Peter Huewe
2017-03-06 21:10   ` [PATCH v2 0/5] Fix whole native SPI TPM driver Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1488459879-24349-5-git-send-email-peter.huewe@infineon.com \
    --to=peter.huewe-d0qzbvysippwk0htik3j/w@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).