tpmdd-devel Archive on lore.kernel.org
 help / color / Atom feed
From: Azhar Shaikh <azhar.shaikh-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
	jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org,
	peterhuewe-Mmb7MZpHnFY@public.gmane.org
Cc: linux-security-module-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	azhar.shaikh-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
	linux-integrity-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v6 2/2] tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
Date: Wed,  6 Dec 2017 17:38:10 -0800
Message-ID: <1512610690-59953-3-git-send-email-azhar.shaikh@intel.com> (raw)
In-Reply-To: <1512610690-59953-1-git-send-email-azhar.shaikh-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

Commit 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell
systems") disabled CLKRUN protocol during TPM transactions and re-enabled
once the transaction is completed. But there were still some corner cases
observed where, reading of TPM header failed for savestate command
while going to suspend, which resulted in suspend failure.
To fix this issue keep the CLKRUN protocol disabled for the entire
duration of a single TPM command and not disabling and re-enabling
again for every TPM transaction. For the other TPM accesses outside
TPM command flow, add a higher level of disabling and re-enabling
the CLKRUN protocol, instead of doing for every TPM transaction.

Fixes: 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell systems")

Signed-off-by: Azhar Shaikh <azhar.shaikh-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/char/tpm/tpm-interface.c |  6 +++
 drivers/char/tpm/tpm_tis.c       | 86 +++++-------------------------------
 drivers/char/tpm/tpm_tis_core.c  | 95 +++++++++++++++++++++++++++++++++++++---
 drivers/char/tpm/tpm_tis_core.h  |  4 ++
 include/linux/tpm.h              |  1 +
 5 files changed, 111 insertions(+), 81 deletions(-)

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index ebe0a1d36d8c..6e19e3dd98e4 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -413,6 +413,9 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,
 	if (chip->dev.parent)
 		pm_runtime_get_sync(chip->dev.parent);
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, true);
+
 	/* Store the decision as chip->locality will be changed. */
 	need_locality = chip->locality == -1;
 
@@ -489,6 +492,9 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,
 		chip->locality = -1;
 	}
 out_no_locality:
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
+
 	if (chip->dev.parent)
 		pm_runtime_put_sync(chip->dev.parent);
 
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 923f8f2cbaca..d29add49b033 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -133,79 +133,17 @@ static int check_acpi_tpm2(struct device *dev)
 }
 #endif
 
-#ifdef CONFIG_X86
-#define LPC_CNTRL_OFFSET		0x84
-#define LPC_CLKRUN_EN			(1 << 2)
-
-/**
- * tpm_platform_begin_xfer() - clear LPC CLKRUN_EN i.e. clocks will be running
- */
-static void tpm_platform_begin_xfer(struct tpm_tis_data *data)
-{
-	u32 clkrun_val;
-
-	if (!is_bsw())
-		return;
-
-	clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-	/* Disable LPC CLKRUN# */
-	clkrun_val &= ~LPC_CLKRUN_EN;
-	iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-	/*
-	 * Write any random value on port 0x80 which is on LPC, to make
-	 * sure LPC clock is running before sending any TPM command.
-	 */
-	outb(0xCC, 0x80);
-
-}
-
-/**
- * tpm_platform_end_xfer() - set LPC CLKRUN_EN i.e. clocks can be turned off
- */
-static void tpm_platform_end_xfer(struct tpm_tis_data *data)
-{
-	u32 clkrun_val;
-
-	if (!is_bsw())
-		return;
-
-	clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-	/* Enable LPC CLKRUN# */
-	clkrun_val |= LPC_CLKRUN_EN;
-	iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-	/*
-	 * Write any random value on port 0x80 which is on LPC, to make
-	 * sure LPC clock is running before sending any TPM command.
-	 */
-	outb(0xCC, 0x80);
-
-}
-#else
-static void tpm_platform_begin_xfer(struct tpm_tis_data *data)
-{
-}
-
-static void tpm_platform_end_xfer(struct tpm_tis_data *data)
-{
-}
-#endif
-
 static int tpm_tcg_read_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
 			      u8 *result)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer(data);
+	if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
+		WARN(1, "CLKRUN not enabled!\n");
 
 	while (len--)
 		*result++ = ioread8(phy->iobase + addr);
 
-	tpm_platform_end_xfer(data);
-
 	return 0;
 }
 
@@ -214,13 +152,12 @@ static int tpm_tcg_write_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer(data);
+	if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
+		WARN(1, "CLKRUN not enabled!\n");
 
 	while (len--)
 		iowrite8(*value++, phy->iobase + addr);
 
-	tpm_platform_end_xfer(data);
-
 	return 0;
 }
 
@@ -228,12 +165,11 @@ static int tpm_tcg_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer(data);
+	if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
+		WARN(1, "CLKRUN not enabled!\n");
 
 	*result = ioread16(phy->iobase + addr);
 
-	tpm_platform_end_xfer(data);
-
 	return 0;
 }
 
@@ -241,12 +177,11 @@ static int tpm_tcg_read32(struct tpm_tis_data *data, u32 addr, u32 *result)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer(data);
+	if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
+		WARN(1, "CLKRUN not enabled!\n");
 
 	*result = ioread32(phy->iobase + addr);
 
-	tpm_platform_end_xfer(data);
-
 	return 0;
 }
 
@@ -254,12 +189,11 @@ static int tpm_tcg_write32(struct tpm_tis_data *data, u32 addr, u32 value)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer(data);
+	if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
+		WARN(1, "CLKRUN not enabled!\n");
 
 	iowrite32(value, phy->iobase + addr);
 
-	tpm_platform_end_xfer(data);
-
 	return 0;
 }
 
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index bea151844692..c2227983ed88 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -475,19 +475,28 @@ static bool tpm_tis_update_timeouts(struct tpm_chip *chip,
 	int i, rc;
 	u32 did_vid;
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, true);
+
 	rc = tpm_tis_read32(priv, TPM_DID_VID(0), &did_vid);
 	if (rc < 0)
-		return rc;
+		goto out;
 
 	for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) {
 		if (vendor_timeout_overrides[i].did_vid != did_vid)
 			continue;
 		memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us,
 		       sizeof(vendor_timeout_overrides[i].timeout_us));
-		return true;
+		rc = true;
 	}
 
-	return false;
+	rc = false;
+
+out:
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
+
+	return rc;
 }
 
 /*
@@ -707,14 +716,71 @@ void tpm_tis_remove(struct tpm_chip *chip)
 	u32 interrupt;
 	int rc;
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, true);
+
 	rc = tpm_tis_read32(priv, reg, &interrupt);
 	if (rc < 0)
 		interrupt = 0;
 
 	tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
+
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
 }
 EXPORT_SYMBOL_GPL(tpm_tis_remove);
 
+/**
+ * tpm_tis_clkrun_enable() - Keep clkrun protocol disabled for entire duration
+ *                           of a single TPM command
+ * @chip:	TPM chip to use
+ * @value:	1 - Disable CLKRUN protocol, so that clocks are free running
+ *		0 - Enable CLKRUN protocol
+ */
+static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
+{
+	struct tpm_tis_data *data = dev_get_drvdata(&chip->dev);
+	u32 clkrun_val;
+
+	if (!IS_ENABLED(CONFIG_X86) || !is_bsw())
+		return;
+
+	if (value) {
+		data->flags |= TPM_TIS_CLK_ENABLE;
+		data->clkrun_enabled++;
+		if (data->clkrun_enabled > 1)
+			return;
+		clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
+
+		/* Disable LPC CLKRUN# */
+		clkrun_val &= ~LPC_CLKRUN_EN;
+		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
+
+		/*
+		 * Write any random value on port 0x80 which is on LPC, to make
+		 * sure LPC clock is running before sending any TPM command.
+		 */
+		outb(0xCC, 0x80);
+	} else {
+		data->clkrun_enabled--;
+		if (data->clkrun_enabled)
+			return;
+
+		clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
+
+		/* Enable LPC CLKRUN# */
+		clkrun_val |= LPC_CLKRUN_EN;
+		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
+
+		/*
+		 * Write any random value on port 0x80 which is on LPC, to make
+		 * sure LPC clock is running before sending any TPM command.
+		 */
+		outb(0xCC, 0x80);
+		data->flags &= ~TPM_TIS_CLK_ENABLE;
+	}
+}
+
 static const struct tpm_class_ops tpm_tis = {
 	.flags = TPM_OPS_AUTO_STARTUP,
 	.status = tpm_tis_status,
@@ -727,6 +793,7 @@ void tpm_tis_remove(struct tpm_chip *chip)
 	.req_canceled = tpm_tis_req_canceled,
 	.request_locality = request_locality,
 	.relinquish_locality = release_locality,
+	.clk_enable = tpm_tis_clkrun_enable,
 };
 
 int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
@@ -761,6 +828,9 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 			return -ENOMEM;
 	}
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, true);
+
 	if (wait_startup(chip, 0) != 0) {
 		rc = -ENODEV;
 		goto out_err;
@@ -855,12 +925,18 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 	if (rc && is_bsw())
 		iounmap(priv->ilb_base_addr);
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
+
 	return rc;
 out_err:
 	tpm_tis_remove(chip);
 	if (is_bsw())
 		iounmap(priv->ilb_base_addr);
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
+
 	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_tis_core_init);
@@ -872,22 +948,31 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
 	u32 intmask;
 	int rc;
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, true);
+
 	/* reenable interrupts that device may have lost or
 	 * BIOS/firmware may have disabled
 	 */
 	rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), priv->irq);
 	if (rc < 0)
-		return;
+		goto out;
 
 	rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
 	if (rc < 0)
-		return;
+		goto out;
 
 	intmask |= TPM_INTF_CMD_READY_INT
 	    | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
 	    | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
 
 	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+
+out:
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
+
+	return;
 }
 
 int tpm_tis_resume(struct device *dev)
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index 458847f72758..afc50cde1ba6 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -79,11 +79,14 @@ enum tis_defaults {
 #define	TPM_DID_VID(l)			(0x0F00 | ((l) << 12))
 #define	TPM_RID(l)			(0x0F04 | ((l) << 12))
 
+#define LPC_CNTRL_OFFSET		0x84
+#define LPC_CLKRUN_EN			(1 << 2)
 #define INTEL_LEGACY_BLK_BASE_ADDR	0xFED08000
 #define ILB_REMAP_SIZE			0x100
 
 enum tpm_tis_flags {
 	TPM_TIS_ITPM_WORKAROUND		= BIT(0),
+	TPM_TIS_CLK_ENABLE		= BIT(1),
 };
 
 struct tpm_tis_data {
@@ -93,6 +96,7 @@ struct tpm_tis_data {
 	bool irq_tested;
 	unsigned int flags;
 	void __iomem *ilb_base_addr;
+	u16 clkrun_enabled;
 	wait_queue_head_t int_queue;
 	wait_queue_head_t read_queue;
 	const struct tpm_tis_phy_ops *phy_ops;
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index 5a090f5ab335..881312d85574 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -50,6 +50,7 @@ struct tpm_class_ops {
 				unsigned long *timeout_cap);
 	int (*request_locality)(struct tpm_chip *chip, int loc);
 	void (*relinquish_locality)(struct tpm_chip *chip, int loc);
+	void (*clk_enable)(struct tpm_chip *chip, bool value);
 };
 
 #if defined(CONFIG_TCG_TPM) || defined(CONFIG_TCG_TPM_MODULE)
-- 
1.9.1


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

  parent reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-07  1:38 [PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis Azhar Shaikh
2017-12-07  1:38 ` [PATCH v6 1/2] tpm_tis: Move ilb_base_addr to tpm_tis_data Azhar Shaikh
     [not found] ` <1512610690-59953-1-git-send-email-azhar.shaikh-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2017-12-07  1:38   ` Azhar Shaikh [this message]
2017-12-08 10:51 ` [PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis Jarkko Sakkinen
  -- strict thread matches above, loose matches on Subject: below --
2017-11-29 18:39 Azhar Shaikh
2017-11-29 18:39 ` [PATCH v6 2/2] tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd() Azhar Shaikh

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1512610690-59953-3-git-send-email-azhar.shaikh@intel.com \
    --to=azhar.shaikh-ral2jqcrhueavxtiumwx3w@public.gmane.org \
    --cc=jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
    --cc=linux-integrity-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-security-module-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=peterhuewe-Mmb7MZpHnFY@public.gmane.org \
    --cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

tpmdd-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/tpmdd-devel/0 tpmdd-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 tpmdd-devel tpmdd-devel/ https://lore.kernel.org/tpmdd-devel \
		tpmdd-devel@lists.sourceforge.net tpmdd-devel@archiver.kernel.org
	public-inbox-index tpmdd-devel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/net.sourceforge.lists.tpmdd-devel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox