From: Haris Okanovic <haris.okanovic-acOepvfBmUk@public.gmane.org>
To: linux-rt-users-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: haris.okanovic-acOepvfBmUk@public.gmane.org,
julia.cartwright-acOepvfBmUk@public.gmane.org,
harisokn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
eric.gardiner-acOepvfBmUk@public.gmane.org,
jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org,
jonathan.david-acOepvfBmUk@public.gmane.org,
tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
scott.hartman-acOepvfBmUk@public.gmane.org,
chris.graf-acOepvfBmUk@public.gmane.org,
gratian.crisan-acOepvfBmUk@public.gmane.org,
brad.mouring-acOepvfBmUk@public.gmane.org
Subject: [PATCH v2] tpm_tis: fix stall after iowrite*()s
Date: Tue, 15 Aug 2017 15:13:08 -0500 [thread overview]
Message-ID: <20170815201308.20024-1-haris.okanovic@ni.com> (raw)
In-Reply-To: <20170804215651.29247-1-haris.okanovic-acOepvfBmUk@public.gmane.org>
ioread8() operations to TPM MMIO addresses can stall the cpu when
immediately following a sequence of iowrite*()'s to the same region.
For example, cyclitest measures ~400us latency spikes when a non-RT
usermode application communicates with an SPI-based TPM chip (Intel Atom
E3940 system, PREEMPT_RT_FULL kernel). The spikes are caused by a
stalling ioread8() operation following a sequence of 30+ iowrite8()s to
the same address. I believe this happens because the write sequence is
buffered (in cpu or somewhere along the bus), and gets flushed on the
first LOAD instruction (ioread*()) that follows.
The enclosed change appears to fix this issue: read the TPM chip's
access register (status code) after every iowrite*() operation to
amortize the cost of flushing data to chip across multiple instructions.
Signed-off-by: Haris Okanovic <haris.okanovic-acOepvfBmUk@public.gmane.org>
---
[PATCH v2] Add tpm_tis_flush() function with comment explaining
the ioread8() after write, per Alexander.
https://patchwork.kernel.org/patch/9882119/
https://github.com/harisokanovic/linux/tree/dev/hokanovi/tpm-latency-spike-fix-v2
---
drivers/char/tpm/tpm_tis.c | 29 +++++++++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index c7e1384f1b08..3fdec13eba8d 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -52,6 +52,31 @@ static inline struct tpm_tis_tcg_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data *da
return container_of(data, struct tpm_tis_tcg_phy, priv);
}
+#ifdef CONFIG_PREEMPT_RT_FULL
+/*
+ * Flushes previous write operations to chip so that a subsequent
+ * ioread*()s won't stall a cpu.
+ */
+static inline void tpm_tis_flush(void __iomem *iobase)
+{
+ ioread8(iobase + TPM_ACCESS(0));
+}
+#else
+#define tpm_tis_flush(iobase) do { } while (0)
+#endif
+
+static inline void tpm_tis_iowrite8(u8 b, void __iomem *iobase, u32 addr)
+{
+ iowrite8(b, iobase + addr);
+ tpm_tis_flush(iobase);
+}
+
+static inline void tpm_tis_iowrite32(u32 b, void __iomem *iobase, u32 addr)
+{
+ iowrite32(b, iobase + addr);
+ tpm_tis_flush(iobase);
+}
+
static bool interrupts = true;
module_param(interrupts, bool, 0444);
MODULE_PARM_DESC(interrupts, "Enable interrupts");
@@ -105,7 +130,7 @@ static int tpm_tcg_write_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
while (len--)
- iowrite8(*value++, phy->iobase + addr);
+ tpm_tis_iowrite8(*value++, phy->iobase, addr);
return 0;
}
@@ -129,7 +154,7 @@ static int tpm_tcg_write32(struct tpm_tis_data *data, u32 addr, u32 value)
{
struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
- iowrite32(value, phy->iobase + addr);
+ tpm_tis_iowrite32(value, phy->iobase, addr);
return 0;
}
--
2.13.2
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
next prev parent reply other threads:[~2017-08-15 20:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20170804215651.29247-1-haris.okanovic@ni.com>
2017-08-14 22:53 ` [PATCH] tpm_tis: fix stall after iowrite*()s Haris Okanovic
2017-08-15 6:11 ` Alexander Stein
2017-08-15 20:10 ` Haris Okanovic
[not found] ` <20170804215651.29247-1-haris.okanovic-acOepvfBmUk@public.gmane.org>
2017-08-15 20:13 ` Haris Okanovic [this message]
2017-08-16 21:15 ` [tpmdd-devel] [PATCH v2] " Ken Goldman
2017-08-17 5:57 ` Alexander Stein
2017-08-17 10:38 ` Sebastian Andrzej Siewior
[not found] ` <20170817103807.ubrbylnud6wxod3s-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2017-08-17 17:17 ` Jason Gunthorpe
[not found] ` <20170817171732.GA22792-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2017-08-17 20:12 ` Haris Okanovic
2017-08-19 17:03 ` [tpmdd-devel] " Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170815201308.20024-1-haris.okanovic@ni.com \
--to=haris.okanovic-acoepvfbmuk@public.gmane.org \
--cc=brad.mouring-acOepvfBmUk@public.gmane.org \
--cc=chris.graf-acOepvfBmUk@public.gmane.org \
--cc=eric.gardiner-acOepvfBmUk@public.gmane.org \
--cc=gratian.crisan-acOepvfBmUk@public.gmane.org \
--cc=harisokn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
--cc=jonathan.david-acOepvfBmUk@public.gmane.org \
--cc=julia.cartwright-acOepvfBmUk@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rt-users-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=scott.hartman-acOepvfBmUk@public.gmane.org \
--cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).