[PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis

[PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis

[Azhar Shaikh]

Changes from v1:
- Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
  - Add NULL checks before calling clk_toggle callback
  - Use IS_ENABLED instead of ifdef in tpm_tis_clkrun_toggle()
  - Do not call tpm_platform_begin_xfer() and tpm_platform_end_xfer()
    from tpm_tis_clkrun_toggle(). Make them static again.

- Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
  - This is a new patch in this series as per suggestion from Jason.
  - Is the current implementation ok or I should move the code in tpm_tis_pnp_remove()
    and tpm_tis_plat_remove() inside tpm_tis_remove(). That way all the unmapping
    can be done in one place, instead of 3 different places now. Also the unmapping
    in tpm_tis_init() can be moved to tpm_tis_remove(), since in case of error
    tpm_tis_core_init() calls tpm_tis_remove(). Kindly suggest.

Changes from v2:
- Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
  - No changes

- Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
  - Updated is_bsw() function to have the #ifdef CONFIG_X86 check within the function
    itself. Also removed the #ifdef CONFIG_X86 from all other places around is_bsw()

Changes from v3:
- Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
  - Change function name from clk_toggle to clk_enable
  - Update the commit message.

- Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
  - No changes

Changes from v4:
- The numbering of patches is now interchanged.

- Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
  - Had to move ilb_base_addr to tpm_tis_data, from tpm_tis_tcg_phy.
    Since the ioremapping of ilb_base_addr had to be done before any TPM access,
    hence moved the variable to tpm_tis_data.
  - Also move the ioremapping of ilb_base_addr from tpm_tis_init() to
    tpm_tis_core_init() i.e. before any TPM access is done.
  - Rename marco LPC_CNTRL_REG_OFFSET to LPC_CNTRL_OFFSET
  - Update the commit message.

- Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
  - Remove the functions tpm_platform_begin_xfer() and tpm_platform_end_xfer()
  - Move the code from these functions to tpm_tis_clkrun_enable().

Changes from v5:
- Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
  - No changes

- Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
  - Update the commit message.

Azhar Shaikh (2):
  tpm_tis: Move ilb_base_addr to tpm_tis_data
  tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()

 drivers/char/tpm/tpm-interface.c |   6 ++
 drivers/char/tpm/tpm_tis.c       | 121 ++++++---------------------------------
 drivers/char/tpm/tpm_tis_core.c  | 111 +++++++++++++++++++++++++++++++++--
 drivers/char/tpm/tpm_tis_core.h  |  17 ++++++
 include/linux/tpm.h              |   1 +
 5 files changed, 147 insertions(+), 109 deletions(-)

-- 
1.9.1

[PATCH v6 1/2] tpm_tis: Move ilb_base_addr to tpm_tis_data

[Azhar Shaikh]

Move static variable ilb_base_addr to tpm_tis_data.

Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
---
 drivers/char/tpm/tpm_tis.c      | 75 +++++++++++++++--------------------------
 drivers/char/tpm/tpm_tis_core.c | 16 ++++++++-
 drivers/char/tpm/tpm_tis_core.h | 13 +++++++
 3 files changed, 56 insertions(+), 48 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index e2d1055fb814..923f8f2cbaca 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -134,33 +134,24 @@ static int check_acpi_tpm2(struct device *dev)
 #endif
 
 #ifdef CONFIG_X86
-#define INTEL_LEGACY_BLK_BASE_ADDR      0xFED08000
-#define ILB_REMAP_SIZE			0x100
-#define LPC_CNTRL_REG_OFFSET            0x84
-#define LPC_CLKRUN_EN                   (1 << 2)
-
-static void __iomem *ilb_base_addr;
-
-static inline bool is_bsw(void)
-{
-	return ((boot_cpu_data.x86_model == INTEL_FAM6_ATOM_AIRMONT) ? 1 : 0);
-}
+#define LPC_CNTRL_OFFSET		0x84
+#define LPC_CLKRUN_EN			(1 << 2)
 
 /**
  * tpm_platform_begin_xfer() - clear LPC CLKRUN_EN i.e. clocks will be running
  */
-static void tpm_platform_begin_xfer(void)
+static void tpm_platform_begin_xfer(struct tpm_tis_data *data)
 {
 	u32 clkrun_val;
 
 	if (!is_bsw())
 		return;
 
-	clkrun_val = ioread32(ilb_base_addr + LPC_CNTRL_REG_OFFSET);
+	clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
 
 	/* Disable LPC CLKRUN# */
 	clkrun_val &= ~LPC_CLKRUN_EN;
-	iowrite32(clkrun_val, ilb_base_addr + LPC_CNTRL_REG_OFFSET);
+	iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
 
 	/*
 	 * Write any random value on port 0x80 which is on LPC, to make
@@ -173,18 +164,18 @@ static void tpm_platform_begin_xfer(void)
 /**
  * tpm_platform_end_xfer() - set LPC CLKRUN_EN i.e. clocks can be turned off
  */
-static void tpm_platform_end_xfer(void)
+static void tpm_platform_end_xfer(struct tpm_tis_data *data)
 {
 	u32 clkrun_val;
 
 	if (!is_bsw())
 		return;
 
-	clkrun_val = ioread32(ilb_base_addr + LPC_CNTRL_REG_OFFSET);
+	clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
 
 	/* Enable LPC CLKRUN# */
 	clkrun_val |= LPC_CLKRUN_EN;
-	iowrite32(clkrun_val, ilb_base_addr + LPC_CNTRL_REG_OFFSET);
+	iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
 
 	/*
 	 * Write any random value on port 0x80 which is on LPC, to make
@@ -194,16 +185,11 @@ static void tpm_platform_end_xfer(void)
 
 }
 #else
-static inline bool is_bsw(void)
-{
-	return false;
-}
-
-static void tpm_platform_begin_xfer(void)
+static void tpm_platform_begin_xfer(struct tpm_tis_data *data)
 {
 }
 
-static void tpm_platform_end_xfer(void)
+static void tpm_platform_end_xfer(struct tpm_tis_data *data)
 {
 }
 #endif
@@ -213,12 +199,12 @@ static int tpm_tcg_read_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer();
+	tpm_platform_begin_xfer(data);
 
 	while (len--)
 		*result++ = ioread8(phy->iobase + addr);
 
-	tpm_platform_end_xfer();
+	tpm_platform_end_xfer(data);
 
 	return 0;
 }
@@ -228,12 +214,12 @@ static int tpm_tcg_write_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer();
+	tpm_platform_begin_xfer(data);
 
 	while (len--)
 		iowrite8(*value++, phy->iobase + addr);
 
-	tpm_platform_end_xfer();
+	tpm_platform_end_xfer(data);
 
 	return 0;
 }
@@ -242,11 +228,11 @@ static int tpm_tcg_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer();
+	tpm_platform_begin_xfer(data);
 
 	*result = ioread16(phy->iobase + addr);
 
-	tpm_platform_end_xfer();
+	tpm_platform_end_xfer(data);
 
 	return 0;
 }
@@ -255,11 +241,11 @@ static int tpm_tcg_read32(struct tpm_tis_data *data, u32 addr, u32 *result)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer();
+	tpm_platform_begin_xfer(data);
 
 	*result = ioread32(phy->iobase + addr);
 
-	tpm_platform_end_xfer();
+	tpm_platform_end_xfer(data);
 
 	return 0;
 }
@@ -268,11 +254,11 @@ static int tpm_tcg_write32(struct tpm_tis_data *data, u32 addr, u32 value)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer();
+	tpm_platform_begin_xfer(data);
 
 	iowrite32(value, phy->iobase + addr);
 
-	tpm_platform_end_xfer();
+	tpm_platform_end_xfer(data);
 
 	return 0;
 }
@@ -351,9 +337,13 @@ static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
 static void tpm_tis_pnp_remove(struct pnp_dev *dev)
 {
 	struct tpm_chip *chip = pnp_get_drvdata(dev);
+	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
 
 	tpm_chip_unregister(chip);
 	tpm_tis_remove(chip);
+	if (is_bsw())
+		iounmap(priv->ilb_base_addr);
+
 }
 
 static struct pnp_driver tis_pnp_driver = {
@@ -400,10 +390,14 @@ static int tpm_tis_plat_probe(struct platform_device *pdev)
 static int tpm_tis_plat_remove(struct platform_device *pdev)
 {
 	struct tpm_chip *chip = dev_get_drvdata(&pdev->dev);
+	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
 
 	tpm_chip_unregister(chip);
 	tpm_tis_remove(chip);
 
+	if (is_bsw())
+		iounmap(priv->ilb_base_addr);
+
 	return 0;
 }
 
@@ -461,11 +455,6 @@ static int __init init_tis(void)
 	if (rc)
 		goto err_force;
 
-#ifdef CONFIG_X86
-	if (is_bsw())
-		ilb_base_addr = ioremap(INTEL_LEGACY_BLK_BASE_ADDR,
-					ILB_REMAP_SIZE);
-#endif
 	rc = platform_driver_register(&tis_drv);
 	if (rc)
 		goto err_platform;
@@ -484,10 +473,6 @@ static int __init init_tis(void)
 err_platform:
 	if (force_pdev)
 		platform_device_unregister(force_pdev);
-#ifdef CONFIG_X86
-	if (is_bsw())
-		iounmap(ilb_base_addr);
-#endif
 err_force:
 	return rc;
 }
@@ -497,10 +482,6 @@ static void __exit cleanup_tis(void)
 	pnp_unregister_driver(&tis_pnp_driver);
 	platform_driver_unregister(&tis_drv);
 
-#ifdef CONFIG_X86
-	if (is_bsw())
-		iounmap(ilb_base_addr);
-#endif
 	if (force_pdev)
 		platform_device_unregister(force_pdev);
 }
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index ae905d17c248..bea151844692 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -754,6 +754,13 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 	priv->phy_ops = phy_ops;
 	dev_set_drvdata(&chip->dev, priv);
 
+	if (is_bsw()) {
+		priv->ilb_base_addr = ioremap(INTEL_LEGACY_BLK_BASE_ADDR,
+					ILB_REMAP_SIZE);
+		if (!priv->ilb_base_addr)
+			return -ENOMEM;
+	}
+
 	if (wait_startup(chip, 0) != 0) {
 		rc = -ENODEV;
 		goto out_err;
@@ -844,9 +851,16 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 		}
 	}
 
-	return tpm_chip_register(chip);
+	rc = tpm_chip_register(chip);
+	if (rc && is_bsw())
+		iounmap(priv->ilb_base_addr);
+
+	return rc;
 out_err:
 	tpm_tis_remove(chip);
+	if (is_bsw())
+		iounmap(priv->ilb_base_addr);
+
 	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_tis_core_init);
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index 6bbac319ff3b..458847f72758 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -79,6 +79,9 @@ enum tis_defaults {
 #define	TPM_DID_VID(l)			(0x0F00 | ((l) << 12))
 #define	TPM_RID(l)			(0x0F04 | ((l) << 12))
 
+#define INTEL_LEGACY_BLK_BASE_ADDR	0xFED08000
+#define ILB_REMAP_SIZE			0x100
+
 enum tpm_tis_flags {
 	TPM_TIS_ITPM_WORKAROUND		= BIT(0),
 };
@@ -89,6 +92,7 @@ struct tpm_tis_data {
 	int irq;
 	bool irq_tested;
 	unsigned int flags;
+	void __iomem *ilb_base_addr;
 	wait_queue_head_t int_queue;
 	wait_queue_head_t read_queue;
 	const struct tpm_tis_phy_ops *phy_ops;
@@ -144,6 +148,15 @@ static inline int tpm_tis_write32(struct tpm_tis_data *data, u32 addr,
 	return data->phy_ops->write32(data, addr, value);
 }
 
+static inline bool is_bsw(void)
+{
+#ifdef CONFIG_X86
+	return ((boot_cpu_data.x86_model == INTEL_FAM6_ATOM_AIRMONT) ? 1 : 0);
+#else
+	return false;
+#endif
+}
+
 void tpm_tis_remove(struct tpm_chip *chip);
 int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 		      const struct tpm_tis_phy_ops *phy_ops,
-- 
1.9.1

[PATCH v6 2/2] tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()

[Azhar Shaikh]

Commit 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell
systems") disabled CLKRUN protocol during TPM transactions and re-enabled
once the transaction is completed. But there were still some corner cases
observed where, reading of TPM header failed for savestate command
while going to suspend, which resulted in suspend failure.
To fix this issue keep the CLKRUN protocol disabled for the entire
duration of a single TPM command and not disabling and re-enabling
again for every TPM transaction. For the other TPM accesses outside
TPM command flow, add a higher level of disabling and re-enabling
the CLKRUN protocol, instead of doing for every TPM transaction.

Fixes: 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell systems")

Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
---
 drivers/char/tpm/tpm-interface.c |  6 +++
 drivers/char/tpm/tpm_tis.c       | 86 +++++-------------------------------
 drivers/char/tpm/tpm_tis_core.c  | 95 +++++++++++++++++++++++++++++++++++++---
 drivers/char/tpm/tpm_tis_core.h  |  4 ++
 include/linux/tpm.h              |  1 +
 5 files changed, 111 insertions(+), 81 deletions(-)

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index ebe0a1d36d8c..6e19e3dd98e4 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -413,6 +413,9 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,
 	if (chip->dev.parent)
 		pm_runtime_get_sync(chip->dev.parent);
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, true);
+
 	/* Store the decision as chip->locality will be changed. */
 	need_locality = chip->locality == -1;
 
@@ -489,6 +492,9 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,
 		chip->locality = -1;
 	}
 out_no_locality:
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
+
 	if (chip->dev.parent)
 		pm_runtime_put_sync(chip->dev.parent);
 
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 923f8f2cbaca..d29add49b033 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -133,79 +133,17 @@ static int check_acpi_tpm2(struct device *dev)
 }
 #endif
 
-#ifdef CONFIG_X86
-#define LPC_CNTRL_OFFSET		0x84
-#define LPC_CLKRUN_EN			(1 << 2)
-
-/**
- * tpm_platform_begin_xfer() - clear LPC CLKRUN_EN i.e. clocks will be running
- */
-static void tpm_platform_begin_xfer(struct tpm_tis_data *data)
-{
-	u32 clkrun_val;
-
-	if (!is_bsw())
-		return;
-
-	clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-	/* Disable LPC CLKRUN# */
-	clkrun_val &= ~LPC_CLKRUN_EN;
-	iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-	/*
-	 * Write any random value on port 0x80 which is on LPC, to make
-	 * sure LPC clock is running before sending any TPM command.
-	 */
-	outb(0xCC, 0x80);
-
-}
-
-/**
- * tpm_platform_end_xfer() - set LPC CLKRUN_EN i.e. clocks can be turned off
- */
-static void tpm_platform_end_xfer(struct tpm_tis_data *data)
-{
-	u32 clkrun_val;
-
-	if (!is_bsw())
-		return;
-
-	clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-	/* Enable LPC CLKRUN# */
-	clkrun_val |= LPC_CLKRUN_EN;
-	iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-	/*
-	 * Write any random value on port 0x80 which is on LPC, to make
-	 * sure LPC clock is running before sending any TPM command.
-	 */
-	outb(0xCC, 0x80);
-
-}
-#else
-static void tpm_platform_begin_xfer(struct tpm_tis_data *data)
-{
-}
-
-static void tpm_platform_end_xfer(struct tpm_tis_data *data)
-{
-}
-#endif
-
 static int tpm_tcg_read_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
 			      u8 *result)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer(data);
+	if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
+		WARN(1, "CLKRUN not enabled!\n");
 
 	while (len--)
 		*result++ = ioread8(phy->iobase + addr);
 
-	tpm_platform_end_xfer(data);
-
 	return 0;
 }
 
@@ -214,13 +152,12 @@ static int tpm_tcg_write_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer(data);
+	if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
+		WARN(1, "CLKRUN not enabled!\n");
 
 	while (len--)
 		iowrite8(*value++, phy->iobase + addr);
 
-	tpm_platform_end_xfer(data);
-
 	return 0;
 }
 
@@ -228,12 +165,11 @@ static int tpm_tcg_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer(data);
+	if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
+		WARN(1, "CLKRUN not enabled!\n");
 
 	*result = ioread16(phy->iobase + addr);
 
-	tpm_platform_end_xfer(data);
-
 	return 0;
 }
 
@@ -241,12 +177,11 @@ static int tpm_tcg_read32(struct tpm_tis_data *data, u32 addr, u32 *result)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer(data);
+	if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
+		WARN(1, "CLKRUN not enabled!\n");
 
 	*result = ioread32(phy->iobase + addr);
 
-	tpm_platform_end_xfer(data);
-
 	return 0;
 }
 
@@ -254,12 +189,11 @@ static int tpm_tcg_write32(struct tpm_tis_data *data, u32 addr, u32 value)
 {
 	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-	tpm_platform_begin_xfer(data);
+	if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
+		WARN(1, "CLKRUN not enabled!\n");
 
 	iowrite32(value, phy->iobase + addr);
 
-	tpm_platform_end_xfer(data);
-
 	return 0;
 }
 
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index bea151844692..c2227983ed88 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -475,19 +475,28 @@ static bool tpm_tis_update_timeouts(struct tpm_chip *chip,
 	int i, rc;
 	u32 did_vid;
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, true);
+
 	rc = tpm_tis_read32(priv, TPM_DID_VID(0), &did_vid);
 	if (rc < 0)
-		return rc;
+		goto out;
 
 	for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) {
 		if (vendor_timeout_overrides[i].did_vid != did_vid)
 			continue;
 		memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us,
 		       sizeof(vendor_timeout_overrides[i].timeout_us));
-		return true;
+		rc = true;
 	}
 
-	return false;
+	rc = false;
+
+out:
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
+
+	return rc;
 }
 
 /*
@@ -707,14 +716,71 @@ void tpm_tis_remove(struct tpm_chip *chip)
 	u32 interrupt;
 	int rc;
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, true);
+
 	rc = tpm_tis_read32(priv, reg, &interrupt);
 	if (rc < 0)
 		interrupt = 0;
 
 	tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
+
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
 }
 EXPORT_SYMBOL_GPL(tpm_tis_remove);
 
+/**
+ * tpm_tis_clkrun_enable() - Keep clkrun protocol disabled for entire duration
+ *                           of a single TPM command
+ * @chip:	TPM chip to use
+ * @value:	1 - Disable CLKRUN protocol, so that clocks are free running
+ *		0 - Enable CLKRUN protocol
+ */
+static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
+{
+	struct tpm_tis_data *data = dev_get_drvdata(&chip->dev);
+	u32 clkrun_val;
+
+	if (!IS_ENABLED(CONFIG_X86) || !is_bsw())
+		return;
+
+	if (value) {
+		data->flags |= TPM_TIS_CLK_ENABLE;
+		data->clkrun_enabled++;
+		if (data->clkrun_enabled > 1)
+			return;
+		clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
+
+		/* Disable LPC CLKRUN# */
+		clkrun_val &= ~LPC_CLKRUN_EN;
+		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
+
+		/*
+		 * Write any random value on port 0x80 which is on LPC, to make
+		 * sure LPC clock is running before sending any TPM command.
+		 */
+		outb(0xCC, 0x80);
+	} else {
+		data->clkrun_enabled--;
+		if (data->clkrun_enabled)
+			return;
+
+		clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
+
+		/* Enable LPC CLKRUN# */
+		clkrun_val |= LPC_CLKRUN_EN;
+		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
+
+		/*
+		 * Write any random value on port 0x80 which is on LPC, to make
+		 * sure LPC clock is running before sending any TPM command.
+		 */
+		outb(0xCC, 0x80);
+		data->flags &= ~TPM_TIS_CLK_ENABLE;
+	}
+}
+
 static const struct tpm_class_ops tpm_tis = {
 	.flags = TPM_OPS_AUTO_STARTUP,
 	.status = tpm_tis_status,
@@ -727,6 +793,7 @@ void tpm_tis_remove(struct tpm_chip *chip)
 	.req_canceled = tpm_tis_req_canceled,
 	.request_locality = request_locality,
 	.relinquish_locality = release_locality,
+	.clk_enable = tpm_tis_clkrun_enable,
 };
 
 int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
@@ -761,6 +828,9 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 			return -ENOMEM;
 	}
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, true);
+
 	if (wait_startup(chip, 0) != 0) {
 		rc = -ENODEV;
 		goto out_err;
@@ -855,12 +925,18 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 	if (rc && is_bsw())
 		iounmap(priv->ilb_base_addr);
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
+
 	return rc;
 out_err:
 	tpm_tis_remove(chip);
 	if (is_bsw())
 		iounmap(priv->ilb_base_addr);
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
+
 	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_tis_core_init);
@@ -872,22 +948,31 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
 	u32 intmask;
 	int rc;
 
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, true);
+
 	/* reenable interrupts that device may have lost or
 	 * BIOS/firmware may have disabled
 	 */
 	rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), priv->irq);
 	if (rc < 0)
-		return;
+		goto out;
 
 	rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
 	if (rc < 0)
-		return;
+		goto out;
 
 	intmask |= TPM_INTF_CMD_READY_INT
 	    | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
 	    | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
 
 	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+
+out:
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
+
+	return;
 }
 
 int tpm_tis_resume(struct device *dev)
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index 458847f72758..afc50cde1ba6 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -79,11 +79,14 @@ enum tis_defaults {
 #define	TPM_DID_VID(l)			(0x0F00 | ((l) << 12))
 #define	TPM_RID(l)			(0x0F04 | ((l) << 12))
 
+#define LPC_CNTRL_OFFSET		0x84
+#define LPC_CLKRUN_EN			(1 << 2)
 #define INTEL_LEGACY_BLK_BASE_ADDR	0xFED08000
 #define ILB_REMAP_SIZE			0x100
 
 enum tpm_tis_flags {
 	TPM_TIS_ITPM_WORKAROUND		= BIT(0),
+	TPM_TIS_CLK_ENABLE		= BIT(1),
 };
 
 struct tpm_tis_data {
@@ -93,6 +96,7 @@ struct tpm_tis_data {
 	bool irq_tested;
 	unsigned int flags;
 	void __iomem *ilb_base_addr;
+	u16 clkrun_enabled;
 	wait_queue_head_t int_queue;
 	wait_queue_head_t read_queue;
 	const struct tpm_tis_phy_ops *phy_ops;
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index 5a090f5ab335..881312d85574 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -50,6 +50,7 @@ struct tpm_class_ops {
 				unsigned long *timeout_cap);
 	int (*request_locality)(struct tpm_chip *chip, int loc);
 	void (*relinquish_locality)(struct tpm_chip *chip, int loc);
+	void (*clk_enable)(struct tpm_chip *chip, bool value);
 };
 
 #if defined(CONFIG_TCG_TPM) || defined(CONFIG_TCG_TPM_MODULE)
-- 
1.9.1

Re: [PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis

[Jarkko Sakkinen]

On Wed, Nov 29, 2017 at 10:39:49AM -0800, Azhar Shaikh wrote:
> Changes from v1:
> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Add NULL checks before calling clk_toggle callback
>   - Use IS_ENABLED instead of ifdef in tpm_tis_clkrun_toggle()
>   - Do not call tpm_platform_begin_xfer() and tpm_platform_end_xfer()
>     from tpm_tis_clkrun_toggle(). Make them static again.
> 
> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>   - This is a new patch in this series as per suggestion from Jason.
>   - Is the current implementation ok or I should move the code in tpm_tis_pnp_remove()
>     and tpm_tis_plat_remove() inside tpm_tis_remove(). That way all the unmapping
>     can be done in one place, instead of 3 different places now. Also the unmapping
>     in tpm_tis_init() can be moved to tpm_tis_remove(), since in case of error
>     tpm_tis_core_init() calls tpm_tis_remove(). Kindly suggest.
> 
> Changes from v2:
> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - No changes
> 
> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>   - Updated is_bsw() function to have the #ifdef CONFIG_X86 check within the function
>     itself. Also removed the #ifdef CONFIG_X86 from all other places around is_bsw()
> 
> Changes from v3:
> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Change function name from clk_toggle to clk_enable
>   - Update the commit message.
> 
> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>   - No changes
> 
> Changes from v4:
> - The numbering of patches is now interchanged.
> 
> - Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
>   - Had to move ilb_base_addr to tpm_tis_data, from tpm_tis_tcg_phy.
>     Since the ioremapping of ilb_base_addr had to be done before any TPM access,
>     hence moved the variable to tpm_tis_data.
>   - Also move the ioremapping of ilb_base_addr from tpm_tis_init() to
>     tpm_tis_core_init() i.e. before any TPM access is done.
>   - Rename marco LPC_CNTRL_REG_OFFSET to LPC_CNTRL_OFFSET
>   - Update the commit message.
> 
> - Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Remove the functions tpm_platform_begin_xfer() and tpm_platform_end_xfer()
>   - Move the code from these functions to tpm_tis_clkrun_enable().
> 
> Changes from v5:
> - Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
>   - No changes
> 
> - Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Update the commit message.
> 
> Azhar Shaikh (2):
>   tpm_tis: Move ilb_base_addr to tpm_tis_data
>   tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
> 
>  drivers/char/tpm/tpm-interface.c |   6 ++
>  drivers/char/tpm/tpm_tis.c       | 121 ++++++---------------------------------
>  drivers/char/tpm/tpm_tis_core.c  | 111 +++++++++++++++++++++++++++++++++--
>  drivers/char/tpm/tpm_tis_core.h  |  17 ++++++
>  include/linux/tpm.h              |   1 +
>  5 files changed, 147 insertions(+), 109 deletions(-)
> 
> -- 
> 1.9.1

I'll go through this next week and test with SPI based TPM that
it doesn't break anything.

/Jarkko

RE: [PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis

[Shaikh, Azhar]

>-----Original Message-----
>From: Jarkko Sakkinen [mailto:jarkko.sakkinen@linux.intel.com]
>Sent: Thursday, November 30, 2017 8:35 AM
>To: Shaikh, Azhar <azhar.shaikh@intel.com>
>Cc: jgunthorpe@obsidianresearch.com; peterhuewe@gmx.de; linux-security-
>module@vger.kernel.org; linux-kernel@vger.kernel.org; tpmdd-
>devel@lists.sourceforge.net
>Subject: Re: [PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis
>
>On Wed, Nov 29, 2017 at 10:39:49AM -0800, Azhar Shaikh wrote:
>> Changes from v1:
>> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of
>transmit_cmd()"
>>   - Add NULL checks before calling clk_toggle callback
>>   - Use IS_ENABLED instead of ifdef in tpm_tis_clkrun_toggle()
>>   - Do not call tpm_platform_begin_xfer() and tpm_platform_end_xfer()
>>     from tpm_tis_clkrun_toggle(). Make them static again.
>>
>> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>>   - This is a new patch in this series as per suggestion from Jason.
>>   - Is the current implementation ok or I should move the code in
>tpm_tis_pnp_remove()
>>     and tpm_tis_plat_remove() inside tpm_tis_remove(). That way all the
>unmapping
>>     can be done in one place, instead of 3 different places now. Also the
>unmapping
>>     in tpm_tis_init() can be moved to tpm_tis_remove(), since in case of error
>>     tpm_tis_core_init() calls tpm_tis_remove(). Kindly suggest.
>>
>> Changes from v2:
>> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of
>transmit_cmd()"
>>   - No changes
>>
>> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>>   - Updated is_bsw() function to have the #ifdef CONFIG_X86 check within
>the function
>>     itself. Also removed the #ifdef CONFIG_X86 from all other places
>> around is_bsw()
>>
>> Changes from v3:
>> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of
>transmit_cmd()"
>>   - Change function name from clk_toggle to clk_enable
>>   - Update the commit message.
>>
>> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>>   - No changes
>>
>> Changes from v4:
>> - The numbering of patches is now interchanged.
>>
>> - Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
>>   - Had to move ilb_base_addr to tpm_tis_data, from tpm_tis_tcg_phy.
>>     Since the ioremapping of ilb_base_addr had to be done before any TPM
>access,
>>     hence moved the variable to tpm_tis_data.
>>   - Also move the ioremapping of ilb_base_addr from tpm_tis_init() to
>>     tpm_tis_core_init() i.e. before any TPM access is done.
>>   - Rename marco LPC_CNTRL_REG_OFFSET to LPC_CNTRL_OFFSET
>>   - Update the commit message.
>>
>> - Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of
>transmit_cmd()"
>>   - Remove the functions tpm_platform_begin_xfer() and
>tpm_platform_end_xfer()
>>   - Move the code from these functions to tpm_tis_clkrun_enable().
>>
>> Changes from v5:
>> - Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
>>   - No changes
>>
>> - Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of
>transmit_cmd()"
>>   - Update the commit message.
>>
>> Azhar Shaikh (2):
>>   tpm_tis: Move ilb_base_addr to tpm_tis_data
>>   tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
>>
>>  drivers/char/tpm/tpm-interface.c |   6 ++
>>  drivers/char/tpm/tpm_tis.c       | 121 ++++++---------------------------------
>>  drivers/char/tpm/tpm_tis_core.c  | 111
>> +++++++++++++++++++++++++++++++++--
>>  drivers/char/tpm/tpm_tis_core.h  |  17 ++++++
>>  include/linux/tpm.h              |   1 +
>>  5 files changed, 147 insertions(+), 109 deletions(-)
>>
>> --
>> 1.9.1
>
>I'll go through this next week and test with SPI based TPM that it doesn't break
>anything.
>

Sure!

Thank you!

>/Jarkko

Regards,
Azhar Shaikh

Re: [PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis

[Jarkko Sakkinen]

On Wed, Nov 29, 2017 at 10:39:49AM -0800, Azhar Shaikh wrote:
> Changes from v1:
> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Add NULL checks before calling clk_toggle callback
>   - Use IS_ENABLED instead of ifdef in tpm_tis_clkrun_toggle()
>   - Do not call tpm_platform_begin_xfer() and tpm_platform_end_xfer()
>     from tpm_tis_clkrun_toggle(). Make them static again.
> 
> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>   - This is a new patch in this series as per suggestion from Jason.
>   - Is the current implementation ok or I should move the code in tpm_tis_pnp_remove()
>     and tpm_tis_plat_remove() inside tpm_tis_remove(). That way all the unmapping
>     can be done in one place, instead of 3 different places now. Also the unmapping
>     in tpm_tis_init() can be moved to tpm_tis_remove(), since in case of error
>     tpm_tis_core_init() calls tpm_tis_remove(). Kindly suggest.
> 
> Changes from v2:
> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - No changes
> 
> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>   - Updated is_bsw() function to have the #ifdef CONFIG_X86 check within the function
>     itself. Also removed the #ifdef CONFIG_X86 from all other places around is_bsw()
> 
> Changes from v3:
> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Change function name from clk_toggle to clk_enable
>   - Update the commit message.
> 
> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>   - No changes
> 
> Changes from v4:
> - The numbering of patches is now interchanged.
> 
> - Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
>   - Had to move ilb_base_addr to tpm_tis_data, from tpm_tis_tcg_phy.
>     Since the ioremapping of ilb_base_addr had to be done before any TPM access,
>     hence moved the variable to tpm_tis_data.
>   - Also move the ioremapping of ilb_base_addr from tpm_tis_init() to
>     tpm_tis_core_init() i.e. before any TPM access is done.
>   - Rename marco LPC_CNTRL_REG_OFFSET to LPC_CNTRL_OFFSET
>   - Update the commit message.
> 
> - Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Remove the functions tpm_platform_begin_xfer() and tpm_platform_end_xfer()
>   - Move the code from these functions to tpm_tis_clkrun_enable().
> 
> Changes from v5:
> - Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
>   - No changes
> 
> - Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Update the commit message.
> 
> Azhar Shaikh (2):
>   tpm_tis: Move ilb_base_addr to tpm_tis_data
>   tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
> 
>  drivers/char/tpm/tpm-interface.c |   6 ++
>  drivers/char/tpm/tpm_tis.c       | 121 ++++++---------------------------------
>  drivers/char/tpm/tpm_tis_core.c  | 111 +++++++++++++++++++++++++++++++++--
>  drivers/char/tpm/tpm_tis_core.h  |  17 ++++++
>  include/linux/tpm.h              |   1 +
>  5 files changed, 147 insertions(+), 109 deletions(-)
> 
> -- 
> 1.9.1
> 

Please, resend this to linux-integrity. You have wrong ML in your CC.

/Jarkko

RE: [PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis

[Shaikh, Azhar]

>-----Original Message-----
>From: Jarkko Sakkinen [mailto:jarkko.sakkinen@linux.intel.com]
>Sent: Wednesday, December 6, 2017 5:30 PM
>To: Shaikh, Azhar <azhar.shaikh@intel.com>
>Cc: jgunthorpe@obsidianresearch.com; peterhuewe@gmx.de; linux-security-
>module@vger.kernel.org; linux-kernel@vger.kernel.org; tpmdd-
>devel@lists.sourceforge.net
>Subject: Re: [PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis
>
>On Wed, Nov 29, 2017 at 10:39:49AM -0800, Azhar Shaikh wrote:
>> Changes from v1:
>> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of
>transmit_cmd()"
>>   - Add NULL checks before calling clk_toggle callback
>>   - Use IS_ENABLED instead of ifdef in tpm_tis_clkrun_toggle()
>>   - Do not call tpm_platform_begin_xfer() and tpm_platform_end_xfer()
>>     from tpm_tis_clkrun_toggle(). Make them static again.
>>
>> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>>   - This is a new patch in this series as per suggestion from Jason.
>>   - Is the current implementation ok or I should move the code in
>tpm_tis_pnp_remove()
>>     and tpm_tis_plat_remove() inside tpm_tis_remove(). That way all the
>unmapping
>>     can be done in one place, instead of 3 different places now. Also the
>unmapping
>>     in tpm_tis_init() can be moved to tpm_tis_remove(), since in case of error
>>     tpm_tis_core_init() calls tpm_tis_remove(). Kindly suggest.
>>
>> Changes from v2:
>> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of
>transmit_cmd()"
>>   - No changes
>>
>> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>>   - Updated is_bsw() function to have the #ifdef CONFIG_X86 check within
>the function
>>     itself. Also removed the #ifdef CONFIG_X86 from all other places around
>is_bsw()
>>
>> Changes from v3:
>> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of
>transmit_cmd()"
>>   - Change function name from clk_toggle to clk_enable
>>   - Update the commit message.
>>
>> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>>   - No changes
>>
>> Changes from v4:
>> - The numbering of patches is now interchanged.
>>
>> - Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
>>   - Had to move ilb_base_addr to tpm_tis_data, from tpm_tis_tcg_phy.
>>     Since the ioremapping of ilb_base_addr had to be done before any TPM
>access,
>>     hence moved the variable to tpm_tis_data.
>>   - Also move the ioremapping of ilb_base_addr from tpm_tis_init() to
>>     tpm_tis_core_init() i.e. before any TPM access is done.
>>   - Rename marco LPC_CNTRL_REG_OFFSET to LPC_CNTRL_OFFSET
>>   - Update the commit message.
>>
>> - Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of
>transmit_cmd()"
>>   - Remove the functions tpm_platform_begin_xfer() and
>tpm_platform_end_xfer()
>>   - Move the code from these functions to tpm_tis_clkrun_enable().
>>
>> Changes from v5:
>> - Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
>>   - No changes
>>
>> - Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of
>transmit_cmd()"
>>   - Update the commit message.
>>
>> Azhar Shaikh (2):
>>   tpm_tis: Move ilb_base_addr to tpm_tis_data
>>   tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
>>
>>  drivers/char/tpm/tpm-interface.c |   6 ++
>>  drivers/char/tpm/tpm_tis.c       | 121 ++++++---------------------------------
>>  drivers/char/tpm/tpm_tis_core.c  | 111
>+++++++++++++++++++++++++++++++++--
>>  drivers/char/tpm/tpm_tis_core.h  |  17 ++++++
>>  include/linux/tpm.h              |   1 +
>>  5 files changed, 147 insertions(+), 109 deletions(-)
>>
>> --
>> 1.9.1
>>
>
>Please, resend this to linux-integrity. You have wrong ML in your CC.
>

Sure, I will send it to linux-integrity.

>/Jarkko

Regards,
Azhar Shaikh

[PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis

[Azhar Shaikh]

Changes from v1:
- Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
  - Add NULL checks before calling clk_toggle callback
  - Use IS_ENABLED instead of ifdef in tpm_tis_clkrun_toggle()
  - Do not call tpm_platform_begin_xfer() and tpm_platform_end_xfer()
    from tpm_tis_clkrun_toggle(). Make them static again.

- Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
  - This is a new patch in this series as per suggestion from Jason.
  - Is the current implementation ok or I should move the code in tpm_tis_pnp_remove()
    and tpm_tis_plat_remove() inside tpm_tis_remove(). That way all the unmapping
    can be done in one place, instead of 3 different places now. Also the unmapping
    in tpm_tis_init() can be moved to tpm_tis_remove(), since in case of error
    tpm_tis_core_init() calls tpm_tis_remove(). Kindly suggest.

Changes from v2:
- Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
  - No changes

- Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
  - Updated is_bsw() function to have the #ifdef CONFIG_X86 check within the function
    itself. Also removed the #ifdef CONFIG_X86 from all other places around is_bsw()

Changes from v3:
- Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
  - Change function name from clk_toggle to clk_enable
  - Update the commit message.

- Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
  - No changes

Changes from v4:
- The numbering of patches is now interchanged.

- Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
  - Had to move ilb_base_addr to tpm_tis_data, from tpm_tis_tcg_phy.
    Since the ioremapping of ilb_base_addr had to be done before any TPM access,
    hence moved the variable to tpm_tis_data.
  - Also move the ioremapping of ilb_base_addr from tpm_tis_init() to
    tpm_tis_core_init() i.e. before any TPM access is done.
  - Rename marco LPC_CNTRL_REG_OFFSET to LPC_CNTRL_OFFSET
  - Update the commit message.

- Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
  - Remove the functions tpm_platform_begin_xfer() and tpm_platform_end_xfer()
  - Move the code from these functions to tpm_tis_clkrun_enable().

Changes from v5:
- Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
  - No changes

- Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
  - Update the commit message.

Azhar Shaikh (2):
  tpm_tis: Move ilb_base_addr to tpm_tis_data
  tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()

 drivers/char/tpm/tpm-interface.c |   6 ++
 drivers/char/tpm/tpm_tis.c       | 121 ++++++---------------------------------
 drivers/char/tpm/tpm_tis_core.c  | 111 +++++++++++++++++++++++++++++++++--
 drivers/char/tpm/tpm_tis_core.h  |  17 ++++++
 include/linux/tpm.h              |   1 +
 5 files changed, 147 insertions(+), 109 deletions(-)

-- 
1.9.1

Re: [PATCH v6 0/2] Fix corner cases with disabling CLKRUN in tpm_tis

[Jarkko Sakkinen]

On Wed, Dec 06, 2017 at 05:38:08PM -0800, Azhar Shaikh wrote:
> Changes from v1:
> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Add NULL checks before calling clk_toggle callback
>   - Use IS_ENABLED instead of ifdef in tpm_tis_clkrun_toggle()
>   - Do not call tpm_platform_begin_xfer() and tpm_platform_end_xfer()
>     from tpm_tis_clkrun_toggle(). Make them static again.
> 
> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>   - This is a new patch in this series as per suggestion from Jason.
>   - Is the current implementation ok or I should move the code in tpm_tis_pnp_remove()
>     and tpm_tis_plat_remove() inside tpm_tis_remove(). That way all the unmapping
>     can be done in one place, instead of 3 different places now. Also the unmapping
>     in tpm_tis_init() can be moved to tpm_tis_remove(), since in case of error
>     tpm_tis_core_init() calls tpm_tis_remove(). Kindly suggest.
> 
> Changes from v2:
> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - No changes
> 
> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>   - Updated is_bsw() function to have the #ifdef CONFIG_X86 check within the function
>     itself. Also removed the #ifdef CONFIG_X86 from all other places around is_bsw()
> 
> Changes from v3:
> - Patch 1: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Change function name from clk_toggle to clk_enable
>   - Update the commit message.
> 
> - Patch 2: "tpm_tis: Move ilb_base_addr to tpm_tis_tcg_phy"
>   - No changes
> 
> Changes from v4:
> - The numbering of patches is now interchanged.
> 
> - Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
>   - Had to move ilb_base_addr to tpm_tis_data, from tpm_tis_tcg_phy.
>     Since the ioremapping of ilb_base_addr had to be done before any TPM access,
>     hence moved the variable to tpm_tis_data.
>   - Also move the ioremapping of ilb_base_addr from tpm_tis_init() to
>     tpm_tis_core_init() i.e. before any TPM access is done.
>   - Rename marco LPC_CNTRL_REG_OFFSET to LPC_CNTRL_OFFSET
>   - Update the commit message.
> 
> - Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Remove the functions tpm_platform_begin_xfer() and tpm_platform_end_xfer()
>   - Move the code from these functions to tpm_tis_clkrun_enable().
> 
> Changes from v5:
> - Patch 1: "tpm_tis: Move ilb_base_addr to tpm_tis_data"
>   - No changes
> 
> - Patch 2: "tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()"
>   - Update the commit message.
> 
> Azhar Shaikh (2):
>   tpm_tis: Move ilb_base_addr to tpm_tis_data
>   tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
> 
>  drivers/char/tpm/tpm-interface.c |   6 ++
>  drivers/char/tpm/tpm_tis.c       | 121 ++++++---------------------------------
>  drivers/char/tpm/tpm_tis_core.c  | 111 +++++++++++++++++++++++++++++++++--
>  drivers/char/tpm/tpm_tis_core.h  |  17 ++++++
>  include/linux/tpm.h              |   1 +
>  5 files changed, 147 insertions(+), 109 deletions(-)
> 
> -- 
> 1.9.1

Applied.

/Jarkko