Hi folks,

I am building my TPM 2.0 driver as Kernel modules (tpm.ko, tpm_tis_core.ko and tpm_tis.ko).

 

I noticed that while my /sys/kernel/security directory is created and mounted to securityFS, it is empty.

 

Looking at tpm_bios_log_setup() in tpm1_event.log, I see that this is being done during chip registration:

 

if (chip->flags & TPM_CHIP_FLAG_TPM2)

        chip->bin_log_seqops.seqops =

            &tpm2_binary_b_measurements_seqops;

    else

        chip->bin_log_seqops.seqops =

            &tpm_binary_b_measurements_seqops;

 

 

    chip->bios_dir[cnt] =

        securityfs_create_file("binary_bios_measurements",

                   0440, chip->bios_dir[0],

                   (void *)&chip->bin_log_seqops,

                   &tpm_bios_measurements_ops);

    if (IS_ERR(chip->bios_dir[cnt]))

        goto err;

 

 

My TPM modules are loaded properly and I can interact with TPM using userspace TSS2 applications:

 

$ sudo lsmod | grep tpm

Password:

tpm_crb                 6458  0

tpm_tis                 5950  0

tpm_tis_core           10054  1 tpm_tis

tpm                    48093  3 tpm_crb,tpm_tis,tpm_tis_core

 

 

2017-09-08T19:39:16.239 controller-0 kernel: warning [    0.000000] ACPI: TPM2 000000007b7c8000 00034 (v03 INTEL   S2600WT 00000002 INTL 01000013)

2017-09-08T19:39:16.252 controller-0 kernel: info [    5.457568] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)

 

 

How and when would this file be created? For that matter I don’t even have a /sys/devices/pnp0/<pnp#>/pcrs file present

(I am on CentOS 7.3)

 

 

Thoughts?

 

Thanks,

Kam

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
tpmdd-devel mailing list
tpmdd-devel-5NWGOfrQmnd4wTydcyPnfg@public.gmane.orgceforge.net
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel