From: Simon Glass <sjg@chromium.org>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>, Scott Wood <oss@buserror.net>,
Simon Glass <sjg@chromium.org>, Michael Walle <michael@walle.cc>
Subject: [PATCH v3 1/3] imx8: ls1028a: Drop raw image support
Date: Sun, 1 Aug 2021 14:59:48 -0600 [thread overview]
Message-ID: <20210801205951.2202789-1-sjg@chromium.org> (raw)
The CONFIG_SPL_RAW_IMAGE_SUPPORT option requires that binman provides an
offset for the image (see spl_set_header_raw_uboot()), if binman is used.
These boards use FIT to store U-Boot, so raw image support is not used.
Drop this option to avoid errors once binman starts checking this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Michael Walle <michael@walle.cc> # for kontron_sl28
---
Changes in v3:
- Add ls1028a tag since kontron_sl28 is not imx8
Changes in v2:
- Add a new patch to drop raw image support for some imx8 boards
configs/imx8mm-cl-iot-gate_defconfig | 1 +
configs/imx8mm_evk_defconfig | 1 +
configs/imx8mn_ddr4_evk_defconfig | 1 +
configs/imx8mp_evk_defconfig | 1 +
configs/imx8mq_cm_defconfig | 1 +
configs/kontron_sl28_defconfig | 1 +
configs/phycore-imx8mp_defconfig | 1 +
7 files changed, 7 insertions(+)
diff --git a/configs/imx8mm-cl-iot-gate_defconfig b/configs/imx8mm-cl-iot-gate_defconfig
index 79e4bde0703..7a7f9413dbc 100644
--- a/configs/imx8mm-cl-iot-gate_defconfig
+++ b/configs/imx8mm-cl-iot-gate_defconfig
@@ -30,6 +30,7 @@ CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/compulab/imx8mm-cl-iot-gate/imximage-8mm-lpddr4.cfg"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig
index f7f39b8dc63..8862e10ea57 100644
--- a/configs/imx8mm_evk_defconfig
+++ b/configs/imx8mm_evk_defconfig
@@ -27,6 +27,7 @@ CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig
index 78943dd91d3..ee9960e3cee 100644
--- a/configs/imx8mn_ddr4_evk_defconfig
+++ b/configs/imx8mn_ddr4_evk_defconfig
@@ -30,6 +30,7 @@ CONFIG_DEFAULT_FDT_FILE="imx8mn-ddr4-evk.dtb"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_I2C=y
CONFIG_SPL_WATCHDOG=y
diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig
index 2c6fc16cdf5..b39333eff7e 100644
--- a/configs/imx8mp_evk_defconfig
+++ b/configs/imx8mp_evk_defconfig
@@ -31,6 +31,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_I2C=y
diff --git a/configs/imx8mq_cm_defconfig b/configs/imx8mq_cm_defconfig
index e0a038b168c..ab02312c143 100644
--- a/configs/imx8mq_cm_defconfig
+++ b/configs/imx8mq_cm_defconfig
@@ -25,6 +25,7 @@ CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ronetix/imx8mq-cm/imximage-8mq-lpddr4.cfg"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_I2C=y
CONFIG_SYS_PROMPT="u-boot=> "
diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig
index 29a45ec54bc..3868d7c39b0 100644
--- a/configs/kontron_sl28_defconfig
+++ b/configs/kontron_sl28_defconfig
@@ -31,6 +31,7 @@ CONFIG_USE_BOOTARGS=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_PCI_INIT_R=y
CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index 84a0a5cbaf2..e90c583c85c 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -27,6 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="oftree"
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_I2C=y
--
2.32.0.554.ge1b32706d8-goog
next reply other threads:[~2021-08-01 21:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-01 20:59 Simon Glass [this message]
2021-08-01 20:59 ` [PATCH v3 2/3] arm: Add an __image_copy_start symbol for ARMv8 Simon Glass
2021-08-04 19:52 ` Scott Wood
2021-08-05 19:20 ` Simon Glass
2021-09-25 15:46 ` Simon Glass
2021-09-25 22:35 ` Scott Wood
2021-09-26 15:54 ` Simon Glass
2021-08-01 20:59 ` [PATCH v3 3/3] binman: Show an error if __image_copy_start is missing Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210801205951.2202789-1-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=michael@walle.cc \
--cc=oss@buserror.net \
--cc=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).