From: Jagan Teki <jagan@amarulasolutions.com>
To: Kever Yang <kever.yang@rock-chips.com>
Cc: u-boot@lists.denx.de, linux-amarula@amarulasolutions.com,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH 1/4] arm64: dts: rockchip: px30: Sync Linux PX30.Core files
Date: Wed, 4 Aug 2021 14:35:48 +0530 [thread overview]
Message-ID: <20210804090551.90819-2-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20210804090551.90819-1-jagan@amarulasolutions.com>
Engicam PX30.Core SoM and it's associated Carrier board device tree
files are different than the one it present in U-Boot.
Let's Sync the same from Linux-5.14-rc3 with removal of unneeded
nodes to satisfy the build.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/Makefile | 4 +-
...dts => px30-engicam-px30-core-ctouch2.dts} | 4 +-
...ts => px30-engicam-px30-core-edimm2.2.dts} | 4 +-
arch/arm/dts/px30-engicam-px30-core.dtsi | 241 ++++++++++++++++++
configs/px30-core-ctouch2-px30_defconfig | 4 +-
configs/px30-core-edimm2.2-px30_defconfig | 4 +-
6 files changed, 251 insertions(+), 10 deletions(-)
rename arch/arm/dts/{px30-px30-core-ctouch2.dts => px30-engicam-px30-core-ctouch2.dts} (80%)
rename arch/arm/dts/{px30-px30-core-edimm2.2.dts => px30-engicam-px30-core-edimm2.2.dts} (79%)
create mode 100644 arch/arm/dts/px30-engicam-px30-core.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 537c96bf5b..1d35411aa8 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -71,8 +71,8 @@ dtb-$(CONFIG_MACH_S700) += \
dtb-$(CONFIG_ROCKCHIP_PX30) += \
px30-evb.dtb \
px30-firefly.dtb \
- px30-px30-core-ctouch2.dtb \
- px30-px30-core-edimm2.2.dtb \
+ px30-engicam-px30-core-ctouch2.dtb \
+ px30-engicam-px30-core-edimm2.2.dtb \
rk3326-odroid-go2.dtb
dtb-$(CONFIG_ROCKCHIP_RK3036) += \
diff --git a/arch/arm/dts/px30-px30-core-ctouch2.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts
similarity index 80%
rename from arch/arm/dts/px30-px30-core-ctouch2.dts
rename to arch/arm/dts/px30-engicam-px30-core-ctouch2.dts
index 2da0128188..5a0ecb8fae 100644
--- a/arch/arm/dts/px30-px30-core-ctouch2.dts
+++ b/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts
@@ -9,11 +9,11 @@
/dts-v1/;
#include "px30.dtsi"
#include "px30-engicam-ctouch2.dtsi"
-#include "px30-px30-core.dtsi"
+#include "px30-engicam-px30-core.dtsi"
/ {
model = "Engicam PX30.Core C.TOUCH 2.0";
- compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core",
+ compatible = "engicam,px30-core-ctouch2", "engicam,px30-core",
"rockchip,px30";
chosen {
diff --git a/arch/arm/dts/px30-px30-core-edimm2.2.dts b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts
similarity index 79%
rename from arch/arm/dts/px30-px30-core-edimm2.2.dts
rename to arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts
index c36280ce7f..e54d1e480d 100644
--- a/arch/arm/dts/px30-px30-core-edimm2.2.dts
+++ b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts
@@ -8,11 +8,11 @@
/dts-v1/;
#include "px30.dtsi"
#include "px30-engicam-edimm2.2.dtsi"
-#include "px30-px30-core.dtsi"
+#include "px30-engicam-px30-core.dtsi"
/ {
model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
- compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core",
+ compatible = "engicam,px30-core-edimm2.2", "engicam,px30-core",
"rockchip,px30";
chosen {
diff --git a/arch/arm/dts/px30-engicam-px30-core.dtsi b/arch/arm/dts/px30-engicam-px30-core.dtsi
new file mode 100644
index 0000000000..7249871530
--- /dev/null
+++ b/arch/arm/dts/px30-engicam-px30-core.dtsi
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+ compatible = "engicam,px30-core", "rockchip,px30";
+
+ aliases {
+ mmc0 = &emmc;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v3: DCDC_REG4 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG5 {
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v0: LDO_REG1 {
+ regulator-name = "vcc_1v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_1v0: LDO_REG3 {
+ regulator-name = "vdd_1v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc3v0_pmu: LDO_REG4 {
+ regulator-name = "vcc3v0_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v3_lcd: SWITCH_REG1 {
+ regulator-boot-on;
+ regulator-name = "vcc3v3_lcd";
+ };
+
+ vcc5v0_host: SWITCH_REG2 {
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&io_domains {
+ vccio1-supply = <&vcc_3v3>;
+ vccio2-supply = <&vcc_3v3>;
+ vccio3-supply = <&vcc_3v3>;
+ vccio4-supply = <&vcc_3v3>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc_3v3>;
+ pmuio2-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig
index aed790b6a6..16e4603859 100644
--- a/configs/px30-core-ctouch2-px30_defconfig
+++ b/configs/px30-core-ctouch2-px30_defconfig
@@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
-CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2"
+CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2"
CONFIG_SPL_TEXT_BASE=0x00000000
CONFIG_ROCKCHIP_PX30=y
CONFIG_TARGET_PX30_CORE=y
@@ -21,7 +21,7 @@ CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2.dtb"
# CONFIG_CONSOLE_MUX is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/px30-core-edimm2.2-px30_defconfig b/configs/px30-core-edimm2.2-px30_defconfig
index 0340039ce7..1ac39055f6 100644
--- a/configs/px30-core-edimm2.2-px30_defconfig
+++ b/configs/px30-core-edimm2.2-px30_defconfig
@@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
-CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-edimm2.2"
+CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-edimm2.2"
CONFIG_SPL_TEXT_BASE=0x00000000
CONFIG_ROCKCHIP_PX30=y
CONFIG_TARGET_PX30_CORE=y
@@ -21,7 +21,7 @@ CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-edimm2.2.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-edimm2.2.dtb"
# CONFIG_CONSOLE_MUX is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.25.1
next prev parent reply other threads:[~2021-08-04 9:06 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-04 9:05 [PATCH 0/4] arm64: dts: rockchip: px30: Linux-5.14-rc3 Sync Jagan Teki
2021-08-04 9:05 ` Jagan Teki [this message]
2021-08-04 9:05 ` [PATCH 2/4] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi Jagan Teki
2021-08-04 9:05 ` [PATCH 3/4] arm64: dts: rockchip: px30: Sync Linux-5.14-rc3 dts(i) Jagan Teki
2021-08-04 9:05 ` [PATCH 4/4] engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF Jagan Teki
2021-10-08 21:10 ` [PATCH 0/4] arm64: dts: rockchip: px30: Linux-5.14-rc3 Sync Jagan Teki
2021-10-09 14:52 ` Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210804090551.90819-2-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=kever.yang@rock-chips.com \
--cc=linux-amarula@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).