u-boot.lists.denx.de archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: u-boot@lists.denx.de, Joe Hershberger <joe.hershberger@ni.com>,
	Ramon Fried <rfried.dev@gmail.com>,
	Priyanka Jain <priyanka.jain@nxp.com>
Subject: [PATCH 9/9] configs: ls1021a-tsn: enable the generation of random Ethernet MAC addresses
Date: Tue, 28 Sep 2021 02:48:25 +0300	[thread overview]
Message-ID: <20210927234825.823582-10-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20210927234825.823582-1-vladimir.oltean@nxp.com>

Don't fail when booting a board with an empty EEPROM for MAC addresses.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 configs/ls1021atsn_qspi_defconfig   | 1 +
 configs/ls1021atsn_sdcard_defconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/configs/ls1021atsn_qspi_defconfig b/configs/ls1021atsn_qspi_defconfig
index cb89f73583d9..f8854a4976c0 100644
--- a/configs/ls1021atsn_qspi_defconfig
+++ b/configs/ls1021atsn_qspi_defconfig
@@ -42,6 +42,7 @@ CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_PHY_ATHEROS=y
 CONFIG_PHY_BROADCOM=y
 CONFIG_PHY_FIXED=y
+CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_DM_DSA=y
diff --git a/configs/ls1021atsn_sdcard_defconfig b/configs/ls1021atsn_sdcard_defconfig
index 49cd3edcb68c..ba17febc4f40 100644
--- a/configs/ls1021atsn_sdcard_defconfig
+++ b/configs/ls1021atsn_sdcard_defconfig
@@ -53,6 +53,7 @@ CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_PHY_ATHEROS=y
 CONFIG_PHY_BROADCOM=y
 CONFIG_PHY_FIXED=y
+CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_DM_DSA=y
-- 
2.25.1


  parent reply	other threads:[~2021-09-27 23:50 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-27 23:48 [PATCH 0/9] Support the SJA1105 DSA switch on the NXP LS1021A-TSN board Vladimir Oltean
2021-09-27 23:48 ` [PATCH 1/9] net: tsec: add support for promiscuous mode Vladimir Oltean
2021-09-28 13:34   ` Ramon Fried
2021-09-29  2:32   ` Bin Meng
2021-09-27 23:48 ` [PATCH 2/9] include: import if_vlan.h from Linux Vladimir Oltean
2021-09-28 13:26   ` Ramon Fried
2021-09-29  2:32   ` Bin Meng
2021-09-27 23:48 ` [PATCH 3/9] net: dsa: allow drivers to get the port OF node Vladimir Oltean
2021-09-28 13:34   ` Ramon Fried
2021-09-27 23:48 ` [PATCH 4/9] net: introduce a helper to determine whether to use in-band autoneg Vladimir Oltean
2021-09-28 13:34   ` Ramon Fried
2021-09-29  2:32   ` Bin Meng
2021-09-27 23:48 ` [PATCH 5/9] net: dsa: felix: configure the in-band autoneg property based on OF node info Vladimir Oltean
2021-09-28 13:34   ` Ramon Fried
2021-09-29 12:21     ` Vladimir Oltean
2021-09-27 23:48 ` [PATCH 6/9] net: add driver for NXP SJA1105 DSA L2 switch Vladimir Oltean
2021-09-28 13:35   ` Ramon Fried
2021-09-27 23:48 ` [PATCH 7/9] arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings Vladimir Oltean
2021-09-28 13:26   ` Ramon Fried
2021-09-27 23:48 ` [PATCH 8/9] configs: ls1021a-tsn: enable sja1105 switch driver Vladimir Oltean
2021-09-28 13:26   ` Ramon Fried
2021-09-29  2:33   ` Bin Meng
2021-09-27 23:48 ` Vladimir Oltean [this message]
2021-09-28 13:26   ` [PATCH 9/9] configs: ls1021a-tsn: enable the generation of random Ethernet MAC addresses Ramon Fried
2021-09-29  2:33   ` Bin Meng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210927234825.823582-10-vladimir.oltean@nxp.com \
    --to=vladimir.oltean@nxp.com \
    --cc=joe.hershberger@ni.com \
    --cc=priyanka.jain@nxp.com \
    --cc=rfried.dev@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).