From: tkuw584924@gmail.com
To: u-boot@lists.denx.de
Cc: jagan@amarulasolutions.com, vigneshr@ti.com, p.yadav@ti.com,
tkuw584924@gmail.com, Bacem.Daassi@infineon.com,
Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Subject: [PATCH v2] mtd: spi-nor: Add support for Spansion S25FL256L
Date: Thu, 30 Sep 2021 11:23:37 +0900 [thread overview]
Message-ID: <20210930022337.4358-1-Takahiro.Kuwano@infineon.com> (raw)
From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
The S25FL256L is a part of the S25FL-L family and has the same feature set
as S25FL128L except the density.
The datasheet can be found in the following link.
https://www.cypress.com/file/316171/download
The S25FL256L is 32MB NOR Flash that does not support Bank Address
Register. This fixup is activated if CONFIG_SPI_FLASH_BAR is enabled and
returns ENOTSUPP in setup() hook to avoid further ops.
Tested on Xilinx Zynq-7000 FPGA board.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
---
Changes in v2:
- Merge separated patches into one
- Remove #ifdef CONFIG_SPI_FLASH_BAR
drivers/mtd/spi/spi-nor-core.c | 19 +++++++++++++++++++
drivers/mtd/spi/spi-nor-ids.c | 1 +
2 files changed, 20 insertions(+)
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index f1b4e5ea8e..7572be5e34 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -3224,6 +3224,21 @@ static struct spi_nor_fixups s25hx_t_fixups = {
.post_bfpt = s25hx_t_post_bfpt_fixup,
.post_sfdp = s25hx_t_post_sfdp_fixup,
};
+
+static int s25fl256l_setup(struct spi_nor *nor, const struct flash_info *info,
+ const struct spi_nor_flash_parameter *params)
+{
+ return -ENOTSUPP; /* Bank Address Register is not supported */
+}
+
+static void s25fl256l_default_init(struct spi_nor *nor)
+{
+ nor->setup = s25fl256l_setup;
+}
+
+static struct spi_nor_fixups s25fl256l_fixups = {
+ .default_init = s25fl256l_default_init,
+};
#endif
#ifdef CONFIG_SPI_FLASH_S28HS512T
@@ -3646,6 +3661,10 @@ void spi_nor_set_fixups(struct spi_nor *nor)
break;
}
}
+
+ if (CONFIG_IS_ENABLED(SPI_FLASH_BAR) &&
+ !strcmp(nor->info->name, "s25fl256l"))
+ nor->fixups = &s25fl256l_fixups;
#endif
#ifdef CONFIG_SPI_FLASH_S28HS512T
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index 4aef1ddd6e..11d7d4fcaa 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -227,6 +227,7 @@ const struct flash_info spi_nor_ids[] = {
{ INFO("s25fl208k", 0x014014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ) },
{ INFO("s25fl064l", 0x016017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ INFO("s25fl128l", 0x016018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { INFO("s25fl256l", 0x016019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ INFO6("s25hl512t", 0x342a1a, 0x0f0390, 256 * 1024, 256,
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES |
USE_CLSR) },
--
2.25.1
next reply other threads:[~2021-09-30 2:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-30 2:23 tkuw584924 [this message]
2021-10-08 13:02 ` [PATCH v2] mtd: spi-nor: Add support for Spansion S25FL256L Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210930022337.4358-1-Takahiro.Kuwano@infineon.com \
--to=tkuw584924@gmail.com \
--cc=Bacem.Daassi@infineon.com \
--cc=Takahiro.Kuwano@infineon.com \
--cc=jagan@amarulasolutions.com \
--cc=p.yadav@ti.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).