u-boot.lists.denx.de archive mirror
 help / color / mirror / Atom feed
From: Marcel Ziswiler <marcel@ziswiler.com>
To: u-boot@lists.denx.de
Cc: Tim Harvey <tharvey@gateworks.com>,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Stefano Babic <sbabic@denx.de>, Simon Glass <sjg@chromium.org>,
	Fabio Estevam <festevam@gmail.com>,
	Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	"NXP i.MX U-Boot Team" <uboot-imx@nxp.com>,
	Tom Rini <trini@konsulko.com>,
	"Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>
Subject: [PATCH v2 2/7] arm64: dts: imx8mm-cl-iot-gate-u-boot.dtsi: alphabetically re-order
Date: Fri,  8 Oct 2021 23:02:30 +0200	[thread overview]
Message-ID: <20211008210236.1087637-3-marcel@ziswiler.com> (raw)
In-Reply-To: <20211008210236.1087637-1-marcel@ziswiler.com>

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Alphabetically re-order nodes and properties.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

Changes in v2:
- New patch preparing cl-iot-gate.

 .../dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi  | 202 +++++++++---------
 arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi   | 202 +++++++++---------
 2 files changed, 202 insertions(+), 202 deletions(-)

diff --git a/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi b/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi
index 12065935e49..67ce70d0bdf 100644
--- a/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi
@@ -8,18 +8,18 @@
 		multiple-images;
 	};
 
-	wdt-reboot {
-		compatible = "wdt-reboot";
-		wdt = <&wdog1>;
-		u-boot,dm-spl;
-	};
-
 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
 		};
 	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		u-boot,dm-spl;
+		wdt = <&wdog1>;
+	};
 };
 
 &{/soc@0} {
@@ -27,17 +27,12 @@
 	u-boot,dm-spl;
 };
 
-&clk {
+&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} {
 	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-	/delete-property/ assigned-clocks;
-	/delete-property/ assigned-clock-parents;
-	/delete-property/ assigned-clock-rates;
 };
 
-&osc_24m {
+&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} {
 	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
 };
 
 &aips1 {
@@ -53,94 +48,6 @@
 	u-boot,dm-spl;
 };
 
-&iomuxc {
-	u-boot,dm-spl;
-};
-
-&pinctrl_uart3 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc2_gpio {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc2 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc3 {
-	u-boot,dm-spl;
-};
-
-&gpio1 {
-	u-boot,dm-spl;
-};
-
-&gpio2 {
-	u-boot,dm-spl;
-};
-
-&gpio3 {
-	u-boot,dm-spl;
-};
-
-&gpio4 {
-	u-boot,dm-spl;
-};
-
-&gpio5 {
-	u-boot,dm-spl;
-};
-
-&uart3 {
-	u-boot,dm-spl;
-};
-
-&usdhc1 {
-	u-boot,dm-spl;
-};
-
-&usdhc2 {
-	u-boot,dm-spl;
-};
-
-&usdhc3 {
-	u-boot,dm-spl;
-};
-
-&i2c1 {
-	u-boot,dm-spl;
-};
-
-&i2c2 {
-	u-boot,dm-spl;
-};
-
-&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} {
-	u-boot,dm-spl;
-};
-
-&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} {
-	u-boot,dm-spl;
-};
-
-&pinctrl_i2c2 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_pmic {
-	u-boot,dm-spl;
-};
-
-&fec1 {
-	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-};
-
-&wdog1 {
-	u-boot,dm-spl;
-};
-
 &binman {
 	u-boot-spl-ddr {
 		filename = "u-boot-spl-ddr.bin";
@@ -253,3 +160,96 @@
 		};
 	};
 };
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+};
+
+&fec1 {
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&i2c2 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_i2c2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&uart3 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
index 00927c15744..fe45a35d751 100644
--- a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
@@ -8,18 +8,18 @@
 		multiple-images;
 	};
 
-	wdt-reboot {
-		compatible = "wdt-reboot";
-		wdt = <&wdog1>;
-		u-boot,dm-spl;
-	};
-
 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
 		};
 	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		u-boot,dm-spl;
+		wdt = <&wdog1>;
+	};
 };
 
 &{/soc@0} {
@@ -27,17 +27,12 @@
 	u-boot,dm-spl;
 };
 
-&clk {
+&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} {
 	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-	/delete-property/ assigned-clocks;
-	/delete-property/ assigned-clock-parents;
-	/delete-property/ assigned-clock-rates;
 };
 
-&osc_24m {
+&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} {
 	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
 };
 
 &aips1 {
@@ -53,94 +48,6 @@
 	u-boot,dm-spl;
 };
 
-&iomuxc {
-	u-boot,dm-spl;
-};
-
-&pinctrl_uart3 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc2_gpio {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc2 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc3 {
-	u-boot,dm-spl;
-};
-
-&gpio1 {
-	u-boot,dm-spl;
-};
-
-&gpio2 {
-	u-boot,dm-spl;
-};
-
-&gpio3 {
-	u-boot,dm-spl;
-};
-
-&gpio4 {
-	u-boot,dm-spl;
-};
-
-&gpio5 {
-	u-boot,dm-spl;
-};
-
-&uart3 {
-	u-boot,dm-spl;
-};
-
-&usdhc1 {
-	u-boot,dm-spl;
-};
-
-&usdhc2 {
-	u-boot,dm-spl;
-};
-
-&usdhc3 {
-	u-boot,dm-spl;
-};
-
-&i2c1 {
-	u-boot,dm-spl;
-};
-
-&i2c2 {
-	u-boot,dm-spl;
-};
-
-&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} {
-	u-boot,dm-spl;
-};
-
-&{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} {
-	u-boot,dm-spl;
-};
-
-&pinctrl_i2c2 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_pmic {
-	u-boot,dm-spl;
-};
-
-&fec1 {
-	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-};
-
-&wdog1 {
-	u-boot,dm-spl;
-};
-
 &binman {
 	u-boot-spl-ddr {
 		filename = "u-boot-spl-ddr.bin";
@@ -241,3 +148,96 @@
 		};
 	};
 };
+
+&clk {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+};
+
+&fec1 {
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&i2c2 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&osc_24m {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_i2c2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&uart3 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
-- 
2.26.2


  parent reply	other threads:[~2021-10-08 21:03 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-08 21:02 [PATCH v2 0/7] arm64: dts: imx8mm: add common -binman.dtsi and further clean-up Marcel Ziswiler
2021-10-08 21:02 ` [PATCH v2 1/7] imx8mm-cl-iot-gate: fix imximage intermediate binary naming Marcel Ziswiler
2021-10-08 21:02 ` Marcel Ziswiler [this message]
2021-10-08 21:02 ` [PATCH v2 3/7] arm64: dts: imx8mm-cl-iot-gate-u-boot.dtsi: use common imx8mm-u-boot.dtsi Marcel Ziswiler
2021-10-08 21:02 ` [PATCH v2 4/7] arm64: dts: imx8mm: use common binman configuration Marcel Ziswiler
2021-10-08 21:02 ` [PATCH v2 5/7] arm64: dts: imx8mm-u-boot.dtsi: alphabetically re-order properties Marcel Ziswiler
2021-10-08 21:02 ` [PATCH v2 6/7] arm64: dts: imx8mm-u-boot.dtsi: explicitly add spl filename Marcel Ziswiler
2021-10-08 21:02 ` [PATCH v2 7/7] arm64: dts: imx8mm-u-boot.dtsi: improve odd blob-ext naming Marcel Ziswiler
2021-10-09  5:59 ` [PATCH v2 0/7] arm64: dts: imx8mm: add common -binman.dtsi and further clean-up Peng Fan (OSS)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211008210236.1087637-3-marcel@ziswiler.com \
    --to=marcel@ziswiler.com \
    --cc=festevam@gmail.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=marcel.ziswiler@toradex.com \
    --cc=paul.liu@linaro.org \
    --cc=sbabic@denx.de \
    --cc=sjg@chromium.org \
    --cc=tharvey@gateworks.com \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=uboot-imx@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).