[PATCH 1/3 v4] riscv: Remove OF_PRIOR_STAGE from RISC-V boards

[PATCH 1/3 v4] riscv: Remove OF_PRIOR_STAGE from RISC-V boards

[Ilias Apalodimas]

At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
introduced,  in order to support a DTB handed over by an earlier stage boo
loader.  However we have another option in the Kconfig (OF_BOARD) which has
identical semantics.

On RISC-V some of the boards pick up the DTB from a1 and copy it in their
private gd_t.  Apart from that they copy it to prior_stage_fdt_address,  if
the Kconfig option is selected, which is unnecessary.

So let's switch the config option for those boards to OF_BOARD and define
the required board_fdt_blob_setup() for them.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
Changes since v3:
- fixed a wanring for qemu 32bit compilation
- corected commit message
- removed empty line from qemu-riscv.c
Changes since v2:
- Adjusted board_fdt_blob_setup() for ax25-ae350 to cover OF_BOARD cases 
Changes since v1:
- Remove the sifive unleashed/unmatched changes,  since they'll be handled
 arch/riscv/cpu/cpu.c                    | 3 ---
 arch/riscv/cpu/start.S                  | 5 -----
 arch/riscv/dts/binman.dtsi              | 6 +++---
 board/AndesTech/ax25-ae350/ax25-ae350.c | 7 ++++++-
 board/emulation/qemu-riscv/qemu-riscv.c | 8 ++++++++
 configs/ae350_rv32_defconfig            | 2 +-
 configs/ae350_rv32_spl_defconfig        | 2 +-
 configs/ae350_rv64_defconfig            | 2 +-
 configs/ae350_rv64_spl_defconfig        | 2 +-
 configs/qemu-riscv32_defconfig          | 2 +-
 configs/qemu-riscv32_smode_defconfig    | 2 +-
 configs/qemu-riscv32_spl_defconfig      | 2 +-
 configs/qemu-riscv64_defconfig          | 2 +-
 configs/qemu-riscv64_smode_defconfig    | 2 +-
 configs/qemu-riscv64_spl_defconfig      | 2 +-
 dts/Kconfig                             | 2 +-
 16 files changed, 28 insertions(+), 23 deletions(-)

diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c
index c894ac10b536..e16f1df30254 100644
--- a/arch/riscv/cpu/cpu.c
+++ b/arch/riscv/cpu/cpu.c
@@ -16,9 +16,6 @@
  * The variables here must be stored in the data section since they are used
  * before the bss section is available.
  */
-#ifdef CONFIG_OF_PRIOR_STAGE
-phys_addr_t prior_stage_fdt_address __section(".data");
-#endif
 #ifndef CONFIG_XIP
 u32 hart_lottery __section(".data") = 0;
 
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index 308b0a97a58f..76850ec9be2c 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -142,11 +142,6 @@ call_harts_early_init:
 	bnez	tp, secondary_hart_loop
 #endif
 
-#ifdef CONFIG_OF_PRIOR_STAGE
-	la	t0, prior_stage_fdt_address
-	SREG	s1, 0(t0)
-#endif
-
 	jal	board_init_f_init_reserve
 
 	SREG	s1, GD_FIRMWARE_FDT_ADDR(gp)
diff --git a/arch/riscv/dts/binman.dtsi b/arch/riscv/dts/binman.dtsi
index d26cfdb78a9e..5757ef65ea4b 100644
--- a/arch/riscv/dts/binman.dtsi
+++ b/arch/riscv/dts/binman.dtsi
@@ -48,7 +48,7 @@
 					};
 				};
 
-#ifndef CONFIG_OF_PRIOR_STAGE
+#ifndef CONFIG_OF_BOARD
 				@fdt-SEQ {
 					description = "NAME";
 					type = "flat_dt";
@@ -60,7 +60,7 @@
 			configurations {
 				default = "conf-1";
 
-#ifndef CONFIG_OF_PRIOR_STAGE
+#ifndef CONFIG_OF_BOARD
 				@conf-SEQ {
 #else
 				conf-1 {
@@ -68,7 +68,7 @@
 					description = "NAME";
 					firmware = "opensbi";
 					loadables = "uboot";
-#ifndef CONFIG_OF_PRIOR_STAGE
+#ifndef CONFIG_OF_BOARD
 					fdt = "fdt-SEQ";
 #endif
 				};
diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c b/board/AndesTech/ax25-ae350/ax25-ae350.c
index 81b0ee992372..b0b6e20e9f9d 100644
--- a/board/AndesTech/ax25-ae350/ax25-ae350.c
+++ b/board/AndesTech/ax25-ae350/ax25-ae350.c
@@ -21,7 +21,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern phys_addr_t prior_stage_fdt_address;
 /*
  * Miscellaneous platform dependent initializations
  */
@@ -57,7 +56,13 @@ ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
 
 void *board_fdt_blob_setup(void)
 {
+#if CONFIG_IS_ENABLED(OF_BOARD)
+	return (void *)(ulong)gd->arch.firmware_fdt_addr;
+#elif CONFIG_IS_ENABLED(OF_SEPARATE)
 	return (void *)CONFIG_SYS_FDT_BASE;
+#else
+	return NULL;
+#endif
 }
 
 int smc_init(void)
diff --git a/board/emulation/qemu-riscv/qemu-riscv.c b/board/emulation/qemu-riscv/qemu-riscv.c
index dcfd3f20bee6..2a26e265ffb9 100644
--- a/board/emulation/qemu-riscv/qemu-riscv.c
+++ b/board/emulation/qemu-riscv/qemu-riscv.c
@@ -14,6 +14,8 @@
 #include <virtio_types.h>
 #include <virtio.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int board_init(void)
 {
 	/*
@@ -69,3 +71,9 @@ int board_fit_config_name_match(const char *name)
 	return 0;
 }
 #endif
+
+void *board_fdt_blob_setup(void)
+{
+	/* Stored the DTB address there during our init */
+	return (void *)(ulong)gd->arch.firmware_fdt_addr;
+}
diff --git a/configs/ae350_rv32_defconfig b/configs/ae350_rv32_defconfig
index 4e7a1686a64d..8b6c0b8a4a0a 100644
--- a/configs/ae350_rv32_defconfig
+++ b/configs/ae350_rv32_defconfig
@@ -15,7 +15,7 @@ CONFIG_CMD_SF_TEST=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_BOOTP_PREFER_SERVERIP=y
 CONFIG_CMD_CACHE=y
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
diff --git a/configs/ae350_rv32_spl_defconfig b/configs/ae350_rv32_spl_defconfig
index 34c6af6e7e17..a0fe9b9a71df 100644
--- a/configs/ae350_rv32_spl_defconfig
+++ b/configs/ae350_rv32_spl_defconfig
@@ -19,7 +19,7 @@ CONFIG_CMD_SF_TEST=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_BOOTP_PREFER_SERVERIP=y
 CONFIG_CMD_CACHE=y
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_BOOTP_SEND_HOSTNAME=y
diff --git a/configs/ae350_rv64_defconfig b/configs/ae350_rv64_defconfig
index 05eee371ac2f..cb23cbd3d95e 100644
--- a/configs/ae350_rv64_defconfig
+++ b/configs/ae350_rv64_defconfig
@@ -16,7 +16,7 @@ CONFIG_CMD_SF_TEST=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_BOOTP_PREFER_SERVERIP=y
 CONFIG_CMD_CACHE=y
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
diff --git a/configs/ae350_rv64_spl_defconfig b/configs/ae350_rv64_spl_defconfig
index 9cd7848c92eb..9ad312505db3 100644
--- a/configs/ae350_rv64_spl_defconfig
+++ b/configs/ae350_rv64_spl_defconfig
@@ -20,7 +20,7 @@ CONFIG_CMD_SF_TEST=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_BOOTP_PREFER_SERVERIP=y
 CONFIG_CMD_CACHE=y
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_BOOTP_SEND_HOSTNAME=y
diff --git a/configs/qemu-riscv32_defconfig b/configs/qemu-riscv32_defconfig
index 8ac16cf4186e..6fe133c268d7 100644
--- a/configs/qemu-riscv32_defconfig
+++ b/configs/qemu-riscv32_defconfig
@@ -9,6 +9,6 @@ CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_CMD_BOOTEFI_SELFTEST=y
 CONFIG_CMD_NVEDIT_EFI=y
 # CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_MTD=y
diff --git a/configs/qemu-riscv32_smode_defconfig b/configs/qemu-riscv32_smode_defconfig
index 05eda439618f..c67e8206d1ab 100644
--- a/configs/qemu-riscv32_smode_defconfig
+++ b/configs/qemu-riscv32_smode_defconfig
@@ -10,6 +10,6 @@ CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_CMD_BOOTEFI_SELFTEST=y
 CONFIG_CMD_NVEDIT_EFI=y
 # CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_MTD=y
diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig
index ee81e552724d..77e81fac3af7 100644
--- a/configs/qemu-riscv32_spl_defconfig
+++ b/configs/qemu-riscv32_spl_defconfig
@@ -12,6 +12,6 @@ CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_CMD_SBI=y
 # CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_MTD=y
diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig
index daf5d655d01f..90e87672aab0 100644
--- a/configs/qemu-riscv64_defconfig
+++ b/configs/qemu-riscv64_defconfig
@@ -10,6 +10,6 @@ CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_CMD_BOOTEFI_SELFTEST=y
 CONFIG_CMD_NVEDIT_EFI=y
 # CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_MTD=y
diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig
index 4a6416e2540b..0a8393903368 100644
--- a/configs/qemu-riscv64_smode_defconfig
+++ b/configs/qemu-riscv64_smode_defconfig
@@ -13,6 +13,6 @@ CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_CMD_BOOTEFI_SELFTEST=y
 CONFIG_CMD_NVEDIT_EFI=y
 # CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_MTD=y
diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig
index 429d4d814e65..a15e82dd3ee1 100644
--- a/configs/qemu-riscv64_spl_defconfig
+++ b/configs/qemu-riscv64_spl_defconfig
@@ -13,6 +13,6 @@ CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_CMD_SBI=y
 # CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_MTD=y
diff --git a/dts/Kconfig b/dts/Kconfig
index dabe0080c1ef..39270b47f9f0 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -107,7 +107,7 @@ config OF_EMBED
 	  Boards in the mainline U-Boot tree should not use it.
 
 config OF_BOARD
-	bool "Provided by the board at runtime"
+	bool "Provided by the board (e.g a previous loader) at runtime"
 	depends on !SANDBOX
 	help
 	  If this option is enabled, the device tree will be provided by
-- 
2.33.0

[PATCH 2/3] board: arm: Remove OF_PRIOR_STAGE from the remaining Arm boards

[Ilias Apalodimas]

At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
introduced,  in order to support a DTB handed over by an earlier stage boo
loader.  However we have another option in the Kconfig (OF_BOARD) which has
identical semantics.

So let's remove the option in an effort to simplify U-Boot's config and DTB
management,  and use OF_BOARD instead.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 arch/arm/Kconfig               | 1 -
 board/broadcom/bcmstb/bcmstb.c | 6 ++++++
 configs/bcm7260_defconfig      | 2 +-
 configs/bcm7445_defconfig      | 2 +-
 4 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b5bd3284cd1c..8bc4391fcb27 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -620,7 +620,6 @@ config ARCH_BCMSTB
 	select DM
 	select GPIO_EXTRA_HEADER
 	select OF_CONTROL
-	select OF_PRIOR_STAGE
 	imply CMD_DM
 	help
 	  This enables support for Broadcom ARM-based set-top box
diff --git a/board/broadcom/bcmstb/bcmstb.c b/board/broadcom/bcmstb/bcmstb.c
index 076ac9414418..40d9def24b7b 100644
--- a/board/broadcom/bcmstb/bcmstb.c
+++ b/board/broadcom/bcmstb/bcmstb.c
@@ -135,3 +135,9 @@ int board_late_init(void)
 
 	return 0;
 }
+
+void *board_fdt_blob_setup(void)
+{
+	/* Stored the DTB address there during our init */
+	return (void *)prior_stage_fdt_address;
+}
diff --git a/configs/bcm7260_defconfig b/configs/bcm7260_defconfig
index a42a6acb06d5..be0c945dc811 100644
--- a/configs/bcm7260_defconfig
+++ b/configs/bcm7260_defconfig
@@ -22,7 +22,7 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
diff --git a/configs/bcm7445_defconfig b/configs/bcm7445_defconfig
index 96e8da0748ae..9ab72dcf37c7 100644
--- a/configs/bcm7445_defconfig
+++ b/configs/bcm7445_defconfig
@@ -23,7 +23,7 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-- 
2.33.0

[PATCH 3/3] treewide: Remove OF_PRIOR_STAGE

[Ilias Apalodimas]

The previous patches removed OF_PRIOR_STAGE from the last consumers of the
Kconfig option.  Cleanup any references to it in documentation,  code and
configuration options.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 dts/Kconfig             | 11 ++---------
 include/fdtdec.h        |  4 ----
 lib/fdtdec.c            |  2 --
 tools/binman/binman.rst | 16 ++++++----------
 4 files changed, 8 insertions(+), 25 deletions(-)

diff --git a/dts/Kconfig b/dts/Kconfig
index 39270b47f9f0..100769017e12 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -22,7 +22,7 @@ config BINMAN
 config BINMAN_STANDALONE_FDT
 	bool
 	depends on BINMAN
-	default y if OF_BOARD || OF_PRIOR_STAGE
+	default y if OF_BOARD
 	help
 	  This option tells U-Boot build system that a standalone device tree
 	  source is explicitly required when using binman to package U-Boot.
@@ -32,7 +32,7 @@ config BINMAN_STANDALONE_FDT
 	  directory for a specific board. Such device tree sources are built for
 	  OF_SEPARATE or OF_EMBED. However for a scenario like the board device
 	  tree blob is not provided in the U-Boot build tree, but fed to U-Boot
-	  in the runtime, e.g.: in the OF_PRIOR_STAGE case that it is passed by
+	  in the runtime, e.g.: in the OF_BOARD case that it is passed by
 	  a prior stage bootloader. For such scenario, a standalone device tree
 	  blob containing binman node to describe how to package U-Boot should
 	  be provided explicitly.
@@ -122,13 +122,6 @@ config OF_HOSTFILE
 	  This is only useful for Sandbox.  Use the -d flag to U-Boot to
 	  specify the file to read.
 
-config OF_PRIOR_STAGE
-	bool "Prior stage bootloader DTB for DT control"
-	help
-	  If this option is enabled, the device tree used for DT
-	  control will be read from a device tree binary, at a memory
-	  location passed to U-Boot by the prior stage bootloader.
-
 endchoice
 
 config DEFAULT_DEVICE_TREE
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 8ac20c9a64f7..d0e13fc18313 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -55,10 +55,6 @@ struct bd_info;
 #define SPL_BUILD	0
 #endif
 
-#ifdef CONFIG_OF_PRIOR_STAGE
-extern phys_addr_t prior_stage_fdt_address;
-#endif
-
 /*
  * Information about a resource. start is the first address of the resource
  * and end is the last address (inclusive). The length of the resource will
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 7358cb6dd168..7b379564600d 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -1580,8 +1580,6 @@ int fdtdec_setup(void)
 		puts("Failed to read control FDT\n");
 		return -1;
 	}
-# elif defined(CONFIG_OF_PRIOR_STAGE)
-	gd->fdt_blob = (void *)(uintptr_t)prior_stage_fdt_address;
 # endif
 # ifndef CONFIG_SPL_BUILD
 	/* Allow the early environment to override the fdt address */
diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst
index 09e7b5719825..614df541c5ac 100644
--- a/tools/binman/binman.rst
+++ b/tools/binman/binman.rst
@@ -232,18 +232,18 @@ You can use other, more specific CONFIG options - see 'Automatic .dtsi
 inclusion' below.
 
 
-Using binman with OF_BOARD or OF_PRIOR_STAGE
+Using binman with OF_BOARD
 --------------------------------------------
 
 Normally binman is used with a board configured with OF_SEPARATE or OF_EMBED.
 This is a typical scenario where a device tree source that contains the binman
 node is provided in the arch/<arch>/dts directory for a specific board.
 
-However for a board configured with OF_BOARD or OF_PRIOR_STAGE, no device tree
-blob is provided in the U-Boot build phase hence the binman node information
-is not available. In order to support such use case, a new Kconfig option
-BINMAN_STANDALONE_FDT is introduced, to tell the build system that a standalone
-device tree blob containing binman node is explicitly required.
+However for a board configured with OF_BOARD, no device tree blob is provided
+in the U-Boot build phase hence the binman node information is not available.
+In order to support such use case, a new Kconfig option BINMAN_STANDALONE_FDT
+is introduced, to tell the build system that a standalone device tree blob
+containing binman node is explicitly required.
 
 Note there is a Kconfig option BINMAN_FDT which enables U-Boot run time to
 access information about binman entries, stored in the device tree in a binman
@@ -252,10 +252,6 @@ For the other OF_CONTROL methods, it's quite possible binman node is not
 available as binman is invoked during the build phase, thus this option is not
 turned on by default for these OF_CONTROL methods.
 
-See qemu-riscv64_spl_defconfig for an example of how binman is used with
-OF_PRIOR_STAGE to generate u-boot.itb image.
-
-
 Access to binman entry offsets at run time (symbols)
 ----------------------------------------------------
 
-- 
2.33.0

Re: [PATCH 3/3] treewide: Remove OF_PRIOR_STAGE

[Simon Glass]

Hi Ilias,

On Mon, 11 Oct 2021 at 15:00, Ilias Apalodimas
<ilias.apalodimas@linaro.org> wrote:
>
> The previous patches removed OF_PRIOR_STAGE from the last consumers of the
> Kconfig option.  Cleanup any references to it in documentation,  code and
> configuration options.
>
> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> ---
>  dts/Kconfig             | 11 ++---------
>  include/fdtdec.h        |  4 ----
>  lib/fdtdec.c            |  2 --
>  tools/binman/binman.rst | 16 ++++++----------
>  4 files changed, 8 insertions(+), 25 deletions(-)

Wasn't there a previous version of this patch?

Regards,
Simon

Re: [PATCH 3/3] treewide: Remove OF_PRIOR_STAGE

[Ilias Apalodimas]

Hi Simon,


On Tue, 12 Oct 2021 at 00:31, Simon Glass <sjg@chromium.org> wrote:
>
> Hi Ilias,
>
> On Mon, 11 Oct 2021 at 15:00, Ilias Apalodimas
> <ilias.apalodimas@linaro.org> wrote:
> >
> > The previous patches removed OF_PRIOR_STAGE from the last consumers of the
> > Kconfig option.  Cleanup any references to it in documentation,  code and
> > configuration options.
> >
> > Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> > Reviewed-by: Simon Glass <sjg@chromium.org>
> > ---
> >  dts/Kconfig             | 11 ++---------
> >  include/fdtdec.h        |  4 ----
> >  lib/fdtdec.c            |  2 --
> >  tools/binman/binman.rst | 16 ++++++----------
> >  4 files changed, 8 insertions(+), 25 deletions(-)
>
> Wasn't there a previous version of this patch?

Yea I messed up the versioning apologies.
The first patch of this series is marked as v4 and has a changelog.
The 2 following patches have no changes wrt v3

Cheers
/Ilias
>
> Regards,
> Simon

Re: [PATCH 1/3 v4] riscv: Remove OF_PRIOR_STAGE from RISC-V boards

[Leo Liang]

Hi Ilias,
On Tue, Oct 12, 2021 at 12:00:13AM +0300, Ilias Apalodimas wrote:
> At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
> introduced,  in order to support a DTB handed over by an earlier stage boo

typo: boot loader

> loader.  However we have another option in the Kconfig (OF_BOARD) which has
> identical semantics.
> 
> On RISC-V some of the boards pick up the DTB from a1 and copy it in their
> private gd_t.  Apart from that they copy it to prior_stage_fdt_address,  if
> the Kconfig option is selected, which is unnecessary.
> 
> So let's switch the config option for those boards to OF_BOARD and define
> the required board_fdt_blob_setup() for them.
> 
> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> Reviewed-by: Simon Glass <sjg@chromium.org>

Otherwise, LGTM.
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

Best regards,
Leo

Re: [PATCH 1/3 v4] riscv: Remove OF_PRIOR_STAGE from RISC-V boards

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 896 bytes --]

On Tue, Oct 12, 2021 at 12:00:13AM +0300, Ilias Apalodimas wrote:

> At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
> introduced,  in order to support a DTB handed over by an earlier stage boo
> loader.  However we have another option in the Kconfig (OF_BOARD) which has
> identical semantics.
> 
> On RISC-V some of the boards pick up the DTB from a1 and copy it in their
> private gd_t.  Apart from that they copy it to prior_stage_fdt_address,  if
> the Kconfig option is selected, which is unnecessary.
> 
> So let's switch the config option for those boards to OF_BOARD and define
> the required board_fdt_blob_setup() for them.
> 
> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

Applied to u-boot/master, thanks!

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

Re: [PATCH 2/3] board: arm: Remove OF_PRIOR_STAGE from the remaining Arm boards

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 617 bytes --]

On Tue, Oct 12, 2021 at 12:00:14AM +0300, Ilias Apalodimas wrote:

> At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
> introduced,  in order to support a DTB handed over by an earlier stage boo
> loader.  However we have another option in the Kconfig (OF_BOARD) which has
> identical semantics.
> 
> So let's remove the option in an effort to simplify U-Boot's config and DTB
> management,  and use OF_BOARD instead.
> 
> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> Reviewed-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

Re: [PATCH 3/3] treewide: Remove OF_PRIOR_STAGE

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 415 bytes --]

On Tue, Oct 12, 2021 at 12:00:15AM +0300, Ilias Apalodimas wrote:

> The previous patches removed OF_PRIOR_STAGE from the last consumers of the
> Kconfig option.  Cleanup any references to it in documentation,  code and
> configuration options.
> 
> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> Reviewed-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]