u-boot.lists.denx.de archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Pali Rohár" <pali@kernel.org>,
	"Marek Behún" <marek.behun@nic.cz>
Subject: [PATCH u-boot-marvell v2 7/9] arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t
Date: Fri, 26 Nov 2021 15:37:36 +0100	[thread overview]
Message-ID: <20211126143738.23830-8-kabel@kernel.org> (raw)
In-Reply-To: <20211126143738.23830-1-kabel@kernel.org>

From: Marek Behún <marek.behun@nic.cz>

Checkpatch warns about using uint32/16/8_t instead of u32/16/8.

Use the preferred types.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
 arch/arm/mach-mvebu/spl.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 8c8cbc833f..97d7aea179 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -74,23 +74,23 @@
 
 /* Structure of the main header, version 1 (Armada 370/XP/375/38x/39x) */
 struct kwbimage_main_hdr_v1 {
-	uint8_t  blockid;               /* 0x0       */
-	uint8_t  flags;                 /* 0x1       */
-	uint16_t nandpagesize;          /* 0x2-0x3   */
-	uint32_t blocksize;             /* 0x4-0x7   */
-	uint8_t  version;               /* 0x8       */
-	uint8_t  headersz_msb;          /* 0x9       */
-	uint16_t headersz_lsb;          /* 0xA-0xB   */
-	uint32_t srcaddr;               /* 0xC-0xF   */
-	uint32_t destaddr;              /* 0x10-0x13 */
-	uint32_t execaddr;              /* 0x14-0x17 */
-	uint8_t  options;               /* 0x18      */
-	uint8_t  nandblocksize;         /* 0x19      */
-	uint8_t  nandbadblklocation;    /* 0x1A      */
-	uint8_t  reserved4;             /* 0x1B      */
-	uint16_t reserved5;             /* 0x1C-0x1D */
-	uint8_t  ext;                   /* 0x1E      */
-	uint8_t  checksum;              /* 0x1F      */
+	u8  blockid;               /* 0x0       */
+	u8  flags;                 /* 0x1       */
+	u16 nandpagesize;          /* 0x2-0x3   */
+	u32 blocksize;             /* 0x4-0x7   */
+	u8  version;               /* 0x8       */
+	u8  headersz_msb;          /* 0x9       */
+	u16 headersz_lsb;          /* 0xA-0xB   */
+	u32 srcaddr;               /* 0xC-0xF   */
+	u32 destaddr;              /* 0x10-0x13 */
+	u32 execaddr;              /* 0x14-0x17 */
+	u8  options;               /* 0x18      */
+	u8  nandblocksize;         /* 0x19      */
+	u8  nandbadblklocation;    /* 0x1A      */
+	u8  reserved4;             /* 0x1B      */
+	u16 reserved5;             /* 0x1C-0x1D */
+	u8  ext;                   /* 0x1E      */
+	u8  checksum;              /* 0x1F      */
 } __packed;
 
 #ifdef CONFIG_SPL_MMC
-- 
2.32.0


  parent reply	other threads:[~2021-11-26 14:39 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-26 14:37 [PATCH u-boot-marvell v2 0/9] More verifications for kwbimage in SPL Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 1/9] arm: mvebu: Check that kwbimage offset and blocksize are valid Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 2/9] SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 3/9] arm: mvebu: Check that kwbimage blockid matches boot mode Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 4/9] SPL: Add support for checking board / BootROM specific image types Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 5/9] arm: mvebu: Check for kwbimage data checksum Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 6/9] arm: mvebu: spl: Print srcaddr in error message Marek Behún
2021-11-30  6:20   ` Stefan Roese
2021-12-14 11:10   ` Pali Rohár
2021-12-14 13:11     ` Marek Behún
2021-11-26 14:37 ` Marek Behún [this message]
2021-11-30  6:20   ` [PATCH u-boot-marvell v2 7/9] arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t Stefan Roese
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 8/9] arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible Marek Behún
2021-11-30  6:22   ` Stefan Roese
2021-12-14  9:36   ` Pali Rohár
2021-12-14  9:45     ` Marek Behún
2021-12-14 11:12       ` Pali Rohár
2021-12-14 12:45         ` Marek Behún
2021-12-14 12:48           ` Stefan Roese
2021-12-14 13:01             ` Marek Behún
2021-12-16 18:16               ` Pali Rohár
2021-12-16 22:09                 ` Marek Behún
2021-12-16 22:17                   ` Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 9/9] arm: mvebu: spl: Fix 100 column exceeds Marek Behún
2021-11-30  6:22   ` Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211126143738.23830-8-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=marek.behun@nic.cz \
    --cc=pali@kernel.org \
    --cc=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).