From: Aswath Govindraju <a-govindraju@ti.com>
Cc: <u-boot@lists.denx.de>, Wolfgang Denk <wd@denx.de>,
Hari Nagalla <hnagalla@ti.com>, Keerthy <j-keerthy@ti.com>,
David Huang <d-huang@ti.com>, Dave Gerlach <d-gerlach@ti.com>,
Suman Anna <s-anna@ti.com>, Nishanth Menon <nm@ti.com>,
Tero Kristo <kristo@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Christian Hewitt <christianshewitt@gmail.com>,
Tim Harvey <tharvey@gateworks.com>,
Peter Robinson <pbrobinson@gmail.com>,
Jagan Teki <jagan@amarulasolutions.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Fabio Estevam <festevam@denx.de>,
Andre Przywara <andre.przywara@arm.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Sean Anderson <seanga2@gmail.com>,
Lukasz Majewski <lukma@denx.de>,
Aswath Govindraju <a-govindraju@ti.com>
Subject: [PATCH 19/20] configs: j721s2_evm_r5_defconfig: Add R5 SPL specific defconfig
Date: Thu, 16 Dec 2021 17:57:13 +0530 [thread overview]
Message-ID: <20211216122714.4734-20-a-govindraju@ti.com> (raw)
In-Reply-To: <20211216122714.4734-1-a-govindraju@ti.com>
From: David Huang <d-huang@ti.com>
Enable R5 SPL specific configs for J721S2.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
---
configs/j721s2_evm_r5_defconfig | 171 ++++++++++++++++++++++++++++++++
1 file changed, 171 insertions(+)
create mode 100644 configs/j721s2_evm_r5_defconfig
diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig
new file mode 100644
index 000000000000..4ecab605357c
--- /dev/null
+++ b/configs/j721s2_evm_r5_defconfig
@@ -0,0 +1,171 @@
+CONFIG_PANIC_HANG=y
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x10000
+CONFIG_SOC_K3_J721S2=y
+CONFIG_K3_EARLY_CONS=y
+CONFIG_TARGET_J721S2_R5_EVM=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_SPL_TEXT_BASE=0x41c00000
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-r5-common-proc-board"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_USE_BOOTCOMMAND=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_EARLY_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_NOR_SUPPORT=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_REMOTEPROC=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_THERMAL=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+# CONFIG_CLK_TI_SCI is not set
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_OMAP24XX=y
+CONFIG_DM_MAILBOX=y
+CONFIG_K3_SEC_PROXY=y
+CONFIG_FS_LOADER=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_SPL_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_S28HS512T=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MT35XU=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_POWER_DOMAIN=y
+# CONFIG_TI_SCI_POWER_DOMAIN is not set
+CONFIG_K3_SYSTEM_CONTROLLER=y
+CONFIG_REMOTEPROC_TI_K3_ARM64=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SOC_DEVICE=y
+CONFIG_SOC_DEVICE_TI_K3=y
+CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_CADENCE_QSPI_PHY=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_TI_SCI=y
+CONFIG_DM_THERMAL=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_SPL_USB_CDNS3_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6168
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+CONFIG_TI_POWER_DOMAIN=y
+CONFIG_SPL_CLK_CCF=y
+CONFIG_LIB_RATIONAL=y
+CONFIG_SPL_LIB_RATIONAL=y
+CONFIG_SPL_CLK_K3_PLL=y
+CONFIG_SPL_CLK_K3=y
+CONFIG_K3_DM_FW=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_SPL_DM_GPIO=y
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
+CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
+CONFIG_SPL_SIZE_LIMIT=0x80000
+CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
--
2.17.1
next prev parent reply other threads:[~2021-12-16 12:31 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-16 12:26 [PATCH 00/20] J721S2: Add initial support Aswath Govindraju
2021-12-16 12:26 ` [PATCH 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel Aswath Govindraju
2021-12-16 12:26 ` [PATCH 02/20] ram: k3-ddrss: lpddr4_structs_if.h: Add a pointer to ddr instance Aswath Govindraju
2021-12-16 12:26 ` [PATCH 03/20] ram: k3-ddrss: Add support for multiple instances of DDR subsystems Aswath Govindraju
2021-12-16 12:26 ` [PATCH 04/20] ram: k3-ddrss: Add support for configuring MSMC subsystem in case of Multiple " Aswath Govindraju
2021-12-16 12:26 ` [PATCH 05/20] arm: K3: Add basic support for J721S2 SoC definition Aswath Govindraju
2021-12-16 12:27 ` [PATCH 06/20] drivers: dma: Add support for J721S2 Aswath Govindraju
2021-12-16 12:27 ` [PATCH 07/20] clk: clk-k3: Add support for J721S2 SoC Aswath Govindraju
2021-12-16 12:27 ` [PATCH 08/20] power: domain: ti: " Aswath Govindraju
2021-12-16 12:27 ` [PATCH 09/20] ram: k3-ddrss: " Aswath Govindraju
2021-12-16 12:27 ` [PATCH 10/20] soc: ti: k3-socinfo: Add entry " Aswath Govindraju
2021-12-16 12:27 ` [PATCH 11/20] board: ti: j721s2: Add board support for J721S2 Aswath Govindraju
2021-12-16 12:27 ` [PATCH 12/20] dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC Aswath Govindraju
2021-12-16 12:27 ` [PATCH 13/20] dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2 Aswath Govindraju
2021-12-16 12:27 ` [PATCH 14/20] arm: dts: Add initial support for J721S2 SoC Aswath Govindraju
2021-12-16 12:27 ` [PATCH 15/20] arm: dts: Add initial support for J721S2 System on Module Aswath Govindraju
2021-12-16 12:27 ` [PATCH 16/20] arm: dts: Add support for A72 specific J721S2 Common Processor Board Aswath Govindraju
2021-12-16 12:27 ` [PATCH 17/20] arm: dts: k3-j721s2: Add r5 specific dt support Aswath Govindraju
2021-12-16 12:27 ` [PATCH 18/20] arm: dts: k3-j721s2-ddr: Add DDR support Aswath Govindraju
2021-12-16 12:27 ` Aswath Govindraju [this message]
2021-12-16 12:27 ` [PATCH 20/20] configs: j721s2_evm_a72_defconfig: Add A72 specific defconfig Aswath Govindraju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211216122714.4734-20-a-govindraju@ti.com \
--to=a-govindraju@ti.com \
--cc=andre.przywara@arm.com \
--cc=christianshewitt@gmail.com \
--cc=d-gerlach@ti.com \
--cc=d-huang@ti.com \
--cc=festevam@denx.de \
--cc=hnagalla@ti.com \
--cc=j-keerthy@ti.com \
--cc=jagan@amarulasolutions.com \
--cc=jh80.chung@samsung.com \
--cc=kishon@ti.com \
--cc=kristo@kernel.org \
--cc=lukma@denx.de \
--cc=narmstrong@baylibre.com \
--cc=nm@ti.com \
--cc=pbrobinson@gmail.com \
--cc=s-anna@ti.com \
--cc=seanga2@gmail.com \
--cc=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).