u-boot.lists.denx.de archive mirror
 help / color / mirror / Atom feed
From: Jonas Karlman <jonas@kwiboo.se>
To: Kever Yang <kever.yang@rock-chips.com>,
	Simon Glass <sjg@chromium.org>,
	Philipp Tomsich <philipp.tomsich@vrull.eu>,
	Tom Rini <trini@konsulko.com>, Jonas Karlman <jonas@kwiboo.se>,
	Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Cc: u-boot@lists.denx.de
Subject: [PATCH] board: rockchip: Add Pine64 PineTab2
Date: Sun,  4 Feb 2024 17:30:35 +0000	[thread overview]
Message-ID: <20240204173040.2293613-1-jonas@kwiboo.se> (raw)

The Pine64 PineTab2 is a tablet computer based on the Rockchip RK3566
SoC. The table features 4/8 GB LPDDR4 RAM and 64/128 GB eMMC storage.

Features tested on a Pine64 PineTab2 8GB v2.0:
- SD-card boot
- eMMC boot
- SPI Flash boot
- USB host

Device tree is imported from linux maintainer branch v6.9-armsoc/dts64,
commit 1b7e19448f8f ("arm64: dts: rockchip: Add devicetree for Pine64
PineTab2").

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
This patch depend on the series "rockchip: rk35xx: Sync device tree with
linux v6.8-rc1" [1].

[1] https://patchwork.ozlabs.org/cover/1891669/
---
 arch/arm/dts/Makefile                         |   2 +
 arch/arm/dts/rk3566-pinetab2-u-boot.dtsi      |  44 +
 arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi |   3 +
 arch/arm/dts/rk3566-pinetab2-v0.1.dts         |  28 +
 arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi |   3 +
 arch/arm/dts/rk3566-pinetab2-v2.0.dts         |  48 +
 arch/arm/dts/rk3566-pinetab2.dtsi             | 943 ++++++++++++++++++
 board/pine64/quartz64_rk3566/MAINTAINERS      |  11 +
 configs/pinetab2-rk3566_defconfig             | 119 +++
 doc/board/rockchip/rockchip.rst               |   1 +
 10 files changed, 1202 insertions(+)
 create mode 100644 arch/arm/dts/rk3566-pinetab2-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3566-pinetab2-v0.1.dts
 create mode 100644 arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3566-pinetab2-v2.0.dts
 create mode 100644 arch/arm/dts/rk3566-pinetab2.dtsi
 create mode 100644 configs/pinetab2-rk3566_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 50f35e3db3f0..825fa1cd368a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -173,6 +173,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
 
 dtb-$(CONFIG_ROCKCHIP_RK3568) += \
 	rk3566-anbernic-rgxx3.dtb \
+	rk3566-pinetab2-v0.1.dtb \
+	rk3566-pinetab2-v2.0.dtb \
 	rk3566-quartz64-a.dtb \
 	rk3566-quartz64-b.dtb \
 	rk3566-radxa-cm3-io.dtb \
diff --git a/arch/arm/dts/rk3566-pinetab2-u-boot.dtsi b/arch/arm/dts/rk3566-pinetab2-u-boot.dtsi
new file mode 100644
index 000000000000..4aa6ab1c848c
--- /dev/null
+++ b/arch/arm/dts/rk3566-pinetab2-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "rk356x-u-boot.dtsi"
+
+&fspi_dual_io_pins {
+	bootph-all;
+};
+
+&gpio0 {
+	bootph-all;
+};
+
+&i2c0 {
+	bootph-pre-ram;
+};
+
+&rk817 {
+	bootph-pre-ram;
+
+	regulators {
+		bootph-pre-ram;
+	};
+};
+
+&sdhci {
+	cap-mmc-highspeed;
+};
+
+&sdmmc_pwren_l {
+	bootph-all;
+};
+
+&sfc {
+	bootph-pre-ram;
+	u-boot,spl-sfc-no-dma;
+
+	flash@0 {
+		bootph-pre-ram;
+	};
+};
+
+&vcc3v3_sd {
+	bootph-pre-ram;
+};
diff --git a/arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi b/arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi
new file mode 100644
index 000000000000..061dc3c2c375
--- /dev/null
+++ b/arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "rk3566-pinetab2-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3566-pinetab2-v0.1.dts b/arch/arm/dts/rk3566-pinetab2-v0.1.dts
new file mode 100644
index 000000000000..5fe6ca5da9d3
--- /dev/null
+++ b/arch/arm/dts/rk3566-pinetab2-v0.1.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinetab2.dtsi"
+
+/ {
+	model = "Pine64 PineTab2 v0.1";
+	compatible = "pine64,pinetab2-v0.1", "pine64,pinetab2", "rockchip,rk3566";
+};
+
+&lcd {
+	reset-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
+};
+
+&pinctrl {
+	lcd0 {
+		lcd0_rst_l: lcd0-rst-l {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc1 {
+	vmmc-supply = <&vcc3v3_sys>;
+};
diff --git a/arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi b/arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi
new file mode 100644
index 000000000000..061dc3c2c375
--- /dev/null
+++ b/arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "rk3566-pinetab2-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3566-pinetab2-v2.0.dts b/arch/arm/dts/rk3566-pinetab2-v2.0.dts
new file mode 100644
index 000000000000..9349541cbbd0
--- /dev/null
+++ b/arch/arm/dts/rk3566-pinetab2-v2.0.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinetab2.dtsi"
+
+/ {
+	model = "Pine64 PineTab2 v2.0";
+	compatible = "pine64,pinetab2-v2.0", "pine64,pinetab2", "rockchip,rk3566";
+};
+
+&gpio_keys {
+	pinctrl-0 = <&kb_id_det>, <&hall_int_l>;
+
+	event-hall-sensor {
+		debounce-interval = <20>;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "Hall Sensor";
+		linux,code = <SW_LID>;
+		linux,input-type = <EV_SW>;
+		wakeup-event-action = <EV_ACT_DEASSERTED>;
+		wakeup-source;
+	};
+};
+
+&lcd {
+	reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
+};
+
+&pinctrl {
+	lcd0 {
+		lcd0_rst_l: lcd0-rst-l {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hall {
+		hall_int_l: hall-int-l {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc1 {
+	vmmc-supply = <&vcc_sys>;
+};
diff --git a/arch/arm/dts/rk3566-pinetab2.dtsi b/arch/arm/dts/rk3566-pinetab2.dtsi
new file mode 100644
index 000000000000..db40281eafbe
--- /dev/null
+++ b/arch/arm/dts/rk3566-pinetab2.dtsi
@@ -0,0 +1,943 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3566.dtsi"
+
+/ {
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <25>;
+
+		button-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <297500>;
+		};
+
+		button-vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 25000 0>;
+		brightness-levels = <20 220>;
+		num-interpolated-steps = <200>;
+		default-brightness-level = <100>;
+		power-supply = <&vcc_sys>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <6000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		voltage-max-design-microvolt = <4350000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 = <4322000 100>, <4250000 95>, <4192000 90>, <4136000 85>,
+				       <4080000 80>, <4022000 75>, <3972000 70>, <3928000 65>,
+				       <3885000 60>, <3833000 55>, <3798000 50>, <3780000 45>,
+				       <3776000 40>, <3773000 35>, <3755000 30>, <3706000 25>,
+				       <3640000 20>, <3589000 15>, <3535000 10>, <3492000 5>,
+				       <3400000 0>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&kb_id_det>;
+
+		tablet-mode-switch {
+			debounce-interval = <20>;
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+			label = "Tablet Mode";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	led-0 {
+		compatible = "regulator-led";
+		vled-supply = <&vcc5v0_flashled>;
+		color = <LED_COLOR_ID_WHITE>;
+		function = LED_FUNCTION_FLASH;
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_l>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+
+		simple-audio-card,routing =
+			"MICR", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amplifier OUTL",
+			"Internal Speakers", "Speaker Amplifier OUTR",
+			"Speaker Amplifier INL", "HPOL",
+			"Speaker Amplifier INR", "HPOR";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+		simple-audio-card,aux-devs = <&speaker_amp>;
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spk_ctl>;
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&vcc_bat>;
+	};
+
+	vcc_3v3: vcc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwren_h>;
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc3v3_sd: vcc3v3-sd-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren_l>;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_flashled: vcc5v0-flashled-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_led_en_h>;
+		regulator-name = "vcc5v0_flashled";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_midu>;
+	};
+
+	vcc5v0_usb_host0: vcc5v0-usb-host0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren1_h>;
+		regulator-name = "vcc5v0_usb_host0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_midu>;
+	};
+
+	vcc5v0_usb_host2: vcc5v0-usb-host2-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren2_h>;
+		regulator-name = "vcc5v0_usb_host2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_midu>;
+	};
+
+	vcc_bat: vcc-bat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_bat";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_bat>;
+	};
+
+	vdd1v2_dvp: vdd1v2-dvp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd1v2_dvp";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_3v3>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>, <200000000>, <500000000>;
+	assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>;
+};
+
+&csi_dphy {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	clock-master;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	lcd: panel@0 {
+		compatible = "boe,th101mb31ig002-28a";
+		reg = <0>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		rotation = <90>;
+		power-supply = <&vcc_3v3>;
+
+		port@0 {
+			panel_in_dsi: endpoint@0 {
+				remote-endpoint = <&dsi0_out_con>;
+			};
+		};
+	};
+};
+
+&dsi0_in {
+	dsi0_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_dsi0>;
+	};
+};
+
+&dsi0_out {
+	dsi0_out_con: endpoint {
+		remote-endpoint = <&panel_in_dsi>;
+	};
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_npu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda_0v9_p>;
+	avdd-1v8-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&vcc5v_midu>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu_npu: DCDC_REG2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu_npu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc3v3_sys";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdda_0v9_p: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9_p";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v_midu: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vbus: OTG_SWITCH {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_l_pmuio2>, <&tp_rst_l_pmuio2>;
+		AVDD28-supply = <&vcc3v3_pmu>;
+		VDDIO-supply = <&vcca1v8_pmu>;
+		irq-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+
+	vcm@c {
+		compatible = "dongwoon,dw9714";
+		reg = <0x0c>;
+		vcc-supply = <&vcc1v8_dvp>;
+	};
+
+	camera@36 {
+		compatible = "ovti,ov5648";
+		reg = <0x36>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camerab_pdn_l &camerab_rst_l>;
+
+		clocks = <&cru CLK_CIF_OUT>;
+		assigned-clocks = <&cru CLK_CIF_OUT>;
+		assigned-clock-rates = <24000000>;
+
+		avdd-supply = <&vcc2v8_dvp>;
+		dvdd-supply = <&vdd1v2_dvp>;
+		dovdd-supply = <&vcc1v8_dvp>;
+		powerdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>;
+
+		port {
+			endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <0>;
+				link-frequencies = /bits/ 64 <210000000 168000000>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "silan,sc7a20";
+		reg = <0x18>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int_l>;
+		st,drdy-int-pin = <1>;
+		vdd-supply = <&vcc_1v8>;
+		vddio-supply = <&vcc_1v8>;
+		mount-matrix = "1", "0", "0",
+			       "0", "0", "1",
+			       "0", "1", "0";
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	camerab {
+		camerab_pdn_l: camerab-pdn-l {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		camerab_rst_l: camerab-rst-l {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cameraf {
+		cameraf_pdn_l: cameraf-pdn-l {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cameraf_rst_l: cameraf-rst-l {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	flash {
+		flash_led_en_h: flash-led-en-h {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fspi {
+		fspi_dual_io_pins: fspi-dual-io-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PD0 1 &pcfg_pull_none>,
+				/* fspi_cs0n */
+				<1 RK_PD3 1 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PD1 1 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PD2 1 &pcfg_pull_none>;
+		};
+	};
+
+	gsensor {
+		gsensor_int_l: gsensor-int-l {
+			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	kb {
+		kb_id_det: kb-id-det {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_pwren_h: lcd-pwren-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwren_h: pcie-pwren-h {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwren_l: sdmmc-pwren-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_det_l: hp-det-l {
+			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		spk_ctl: spk-ctl {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tp {
+		tp_int_l_pmuio2: tp-int-l-pmuio2 {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		tp_rst_l_pmuio2: tp-rst-l-pmuio2 {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usbcc_int_l: usbcc-int-l {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_host_pwren1_h: usb-host-pwren1-h {
+			rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_host_pwren2_h: usb-host-pwren2-h {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		host_wake_wl: host-wake-wl {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_wake_host_h: wifi-wake-host-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8
+		     &emmc_clk
+		     &emmc_cmd
+		     &emmc_datastrobe
+		     &emmc_rstnout>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4
+		     &sdmmc0_clk
+		     &sdmmc0_cmd
+		     &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4
+		     &sdmmc1_cmd
+		     &sdmmc1_clk>;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspi_dual_io_pins>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host0>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host2>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/board/pine64/quartz64_rk3566/MAINTAINERS b/board/pine64/quartz64_rk3566/MAINTAINERS
index 6b75b35a1243..37b8c1eb78b6 100644
--- a/board/pine64/quartz64_rk3566/MAINTAINERS
+++ b/board/pine64/quartz64_rk3566/MAINTAINERS
@@ -21,3 +21,14 @@ F:	arch/arm/dts/rk3566-soquartz-cm4.dts
 F:	arch/arm/dts/rk3566-soquartz-cm4-u-boot.dtsi
 F:	arch/arm/dts/rk3566-soquartz-model-a.dts
 F:	arch/arm/dts/rk3566-soquartz-model-a-u-boot.dtsi
+
+PINETAB2-RK3566
+M:	Jonas Karlman <jonas@kwiboo.se>
+S:	Maintained
+F:	configs/pinetab2-rk3566_defconfig
+F:	arch/arm/dts/rk3566-pinetab2.dtsi
+F:	arch/arm/dts/rk3566-pinetab2-u-boot.dtsi
+F:	arch/arm/dts/rk3566-pinetab2-v0.1.dts
+F:	arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi
+F:	arch/arm/dts/rk3566-pinetab2-v2.0.dts
+F:	arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi
diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig
new file mode 100644
index 000000000000..19b396eef975
--- /dev/null
+++ b/configs/pinetab2-rk3566_defconfig
@@ -0,0 +1,119 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_TEXT_BASE=0x00a00000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x1000
+CONFIG_DEFAULT_DEVICE_TREE="rk3566-pinetab2-v2.0"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_TARGET_QUARTZ64_RK3566=y
+CONFIG_SPL_STACK=0x400000
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-pinetab2-v2.0.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x4000000
+CONFIG_SPL_BSS_MAX_SIZE=0x4000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_LIST="rk3566-pinetab2-v0.1 rk3566-pinetab2-v2.0"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_ADC=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_SPL_CLK=y
+# CONFIG_USB_FUNCTION_FASTBOOT is not set
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_BUS=4
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_SILICONKAISER=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SFC=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_PRODUCT_NUM=0x350a
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_ERRNO_STR=y
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index 9fe69fc9422f..fda2282b2c26 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -93,6 +93,7 @@ List of mainline supported Rockchip boards:
 
 * rk3566
      - Anbernic RGxx3 (anbernic-rgxx3-rk3566)
+     - Pine64 PineTab2 (pinetab2-rk3566)
      - Pine64 Quartz64-A Board (quartz64-a-rk3566)
      - Pine64 Quartz64-B Board (quartz64-b-rk3566)
      - Pine64 SOQuartz on Blade (soquartz-blade-rk3566)
-- 
2.43.0


             reply	other threads:[~2024-02-04 17:31 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-04 17:30 Jonas Karlman [this message]
2024-02-05  7:04 ` [PATCH] board: rockchip: Add Pine64 PineTab2 Kever Yang
2024-02-05 13:48   ` Jonas Karlman
2024-03-14  6:50 ` Kever Yang
2024-03-14  7:02   ` Jonas Karlman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240204173040.2293613-1-jonas@kwiboo.se \
    --to=jonas@kwiboo.se \
    --cc=frattaroli.nicolas@gmail.com \
    --cc=kever.yang@rock-chips.com \
    --cc=philipp.tomsich@vrull.eu \
    --cc=sjg@chromium.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).