From: Ben Gardiner <bengardiner@nanometrics.ca>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"
Date: Fri, 27 Aug 2010 23:59:13 -0400 [thread overview]
Message-ID: <AANLkTikw8qafOC9NYhYEduCd7uN_pLc_badvmXV=dFqj@mail.gmail.com> (raw)
In-Reply-To: <4C78352C.20008@freescale.com>
On Fri, Aug 27, 2010 at 5:59 PM, Scott Wood <scottwood@freescale.com> wrote:
> On 08/27/2010 04:46 PM, Scott Wood wrote:
>> For now, I guess don't worry about sharing the code.
>
> Plus, I've got some changes to the NAND command/util code I'm about to send
> out that touch this -- if sharing is going to be a pain, I can go back to
> the version that only passes back "fits with bad blocks", "fits with no bad
> blocks", or "doesn't fit", and doesn't deal with 64-bit sizes because it's
> only used by read/write which is limited by pointer size. ?That simpler
> version is 128 bytes smaller in my build.
I imagine you don't have to go back. I wouldn't want to make the merge
harder; but as long as there is a way to get the the
size-including-bad-blocks and truncation status given an offset and
target size. Please continue your work and I'll find a way to make
'mtdparts spread' fit with it after your post..
Best Regards,
Ben Gardiner
---
Nanometrics Inc.
+1 (613) 592-6776 x239
http://www.nanometrics.ca
next prev parent reply other threads:[~2010-08-28 3:59 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-06 16:28 [U-Boot-Users] [PATCH, resend] Support dynamic/patched NAND ENV offset Harald Welte
2008-07-07 18:47 ` Scott Wood
2008-07-08 0:09 ` Harald Welte
2008-07-08 16:05 ` Scott Wood
2008-07-08 21:12 ` Wolfgang Denk
2008-07-09 0:23 ` Harald Welte
2008-07-09 7:05 ` Wolfgang Denk
2008-07-09 7:25 ` Harald Welte
2008-07-09 8:04 ` Wolfgang Denk
2008-07-09 12:13 ` Harald Welte
2010-06-01 20:23 ` [U-Boot] mtdparts: add bad-block skipping Ben Gardiner
2010-06-01 22:20 ` Wolfgang Denk
2010-06-01 22:34 ` Wolfgang Denk
2010-06-02 5:08 ` Ben Gardiner
2010-06-02 15:58 ` [U-Boot] [PATCH 0/4 v2] " Ben Gardiner
2010-07-05 21:43 ` [U-Boot] [PATCH v3 0/4] " Ben Gardiner
2010-07-12 19:06 ` Ben Gardiner
2010-08-09 20:43 ` [U-Boot] [PATCH v4 " Ben Gardiner
2010-08-30 17:38 ` [U-Boot] [PATCH v5 0/5] " Ben Gardiner
2010-08-30 17:38 ` [U-Boot] [PATCH v5 2/5] mtd: add an mtd method for get_len_incl_bad() Ben Gardiner
2010-08-30 20:57 ` Scott Wood
2010-08-31 13:50 ` Ben Gardiner
2010-08-31 21:48 ` [U-Boot] [PATCH v6 " Ben Gardiner
[not found] ` <1283185640-0-git-send-email-bengardiner@nanometrics.ca>
2010-08-30 17:38 ` [U-Boot] [PATCH v5 3/5] mtdparts: show net size in mtdparts list Ben Gardiner
2010-08-30 20:50 ` Scott Wood
2010-08-31 13:51 ` Ben Gardiner
2010-08-31 15:57 ` Scott Wood
2010-08-31 21:48 ` [U-Boot] [PATCH v6 " Ben Gardiner
2010-08-31 21:47 ` [U-Boot] [PATCH v6 0/5] mtdparts: add bad-block skipping Ben Gardiner
2010-09-09 20:54 ` Scott Wood
2010-08-09 20:43 ` [U-Boot] [PATCH v4 1/4] mtdparts: regroup calls to get_mtd_device_nm Ben Gardiner
2010-08-09 20:43 ` [U-Boot] [PATCH v4 2/4] mtdparts: show net size in mtdparts list Ben Gardiner
2010-08-26 18:57 ` Scott Wood
2010-08-27 13:51 ` Ben Gardiner
2010-08-27 15:44 ` Ben Gardiner
2010-08-27 16:02 ` Scott Wood
2010-08-27 16:45 ` Ben Gardiner
2010-08-09 20:43 ` [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread" Ben Gardiner
2010-08-26 21:12 ` Scott Wood
2010-08-27 13:51 ` Ben Gardiner
2010-08-27 21:36 ` Ben Gardiner
2010-08-27 21:46 ` Scott Wood
2010-08-27 21:52 ` Ben Gardiner
2010-08-27 21:59 ` Scott Wood
2010-08-28 3:59 ` Ben Gardiner [this message]
2010-08-30 20:24 ` Scott Wood
2010-08-30 20:30 ` Ben Gardiner
2010-08-30 17:38 ` [U-Boot] [PATCH v5 4/5] " Ben Gardiner
2010-08-30 21:01 ` Scott Wood
2010-08-30 21:05 ` Scott Wood
2010-08-31 13:51 ` Ben Gardiner
2010-08-31 21:48 ` [U-Boot] [PATCH v6 " Ben Gardiner
2010-08-09 20:44 ` [U-Boot] [PATCH v4 4/4] mtdparts: new add.spread: add part skipping bad blocks Ben Gardiner
2010-08-26 22:26 ` Scott Wood
2010-08-27 13:52 ` Ben Gardiner
2010-08-30 17:39 ` [U-Boot] [PATCH v5 5/5] " Ben Gardiner
2010-08-31 21:48 ` [U-Boot] [PATCH v6 " Ben Gardiner
2010-07-05 21:43 ` [U-Boot] [PATCH v3 1/4] mtdparts: regroup calls to get_mtd_device_nm Ben Gardiner
2010-08-30 17:38 ` [U-Boot] [PATCH v5 1/5] " Ben Gardiner
2010-08-31 21:48 ` [U-Boot] [PATCH v6 " Ben Gardiner
2010-07-05 21:43 ` [U-Boot] [PATCH v3 2/4] mtdparts: show net size in mtdparts list Ben Gardiner
2010-08-07 20:08 ` Wolfgang Denk
2010-08-08 4:06 ` Harald Welte
2010-08-08 13:16 ` Wolfgang Denk
2010-08-09 14:45 ` Ben Gardiner
2010-09-18 19:42 ` Wolfgang Denk
2010-07-05 21:43 ` [U-Boot] [PATCH v3 3/4] mtdparts: add new sub-command "spread" Ben Gardiner
2010-08-07 20:12 ` Wolfgang Denk
2010-07-05 21:43 ` [U-Boot] [PATCH v3 4/4] mtdparts: new add.e: add part skipping bad blocks Ben Gardiner
2010-08-07 20:16 ` Wolfgang Denk
2010-06-02 15:58 ` [U-Boot] [PATCH 1/4 v2] mtdparts: regroup calls to get_mtd_device_nm Ben Gardiner
2010-06-02 15:58 ` [U-Boot] [PATCH 2/4 v2] mtdparts: show net size in mtdparts list Ben Gardiner
2010-06-02 15:58 ` [U-Boot] [PATCH 3/4 v2] mtdparts: add new sub-command "spread" Ben Gardiner
2010-06-02 15:58 ` [U-Boot] [PATCH 4/4 v2] mtdparts: new add.e: add part skipping bad blocks Ben Gardiner
2010-08-09 18:25 ` Scott Wood
2010-08-09 18:39 ` Ben Gardiner
2010-08-09 18:51 ` Scott Wood
2010-06-01 20:23 ` [U-Boot] [PATCH 1/4] mtdparts: regroup calls to get_mtd_device_nm Ben Gardiner
2010-06-02 7:06 ` Stefan Roese
2010-06-01 20:23 ` [U-Boot] [PATCH 2/4] mtdparts: show net size in mtdparts list Ben Gardiner
2010-06-02 7:15 ` Stefan Roese
2010-06-01 20:23 ` [U-Boot] [PATCH 3/4] mtdparts: add new sub-command "spread" Ben Gardiner
2010-06-01 20:23 ` [U-Boot] [PATCH 4/4] mtdparts: new add.e: add part skipping bad blocks Ben Gardiner
2008-07-09 0:18 ` [U-Boot-Users] [PATCH, resend] Support dynamic/patched NAND ENV offset Harald Welte
2008-07-09 5:28 ` Harald Welte
2008-07-09 7:07 ` Harald Welte
2008-07-09 8:11 ` [U-Boot-Users] [PATCH] " Harald Welte
2008-07-11 17:28 ` Scott Wood
2010-05-17 21:04 ` [U-Boot] [PATCH] NAND: Support dynamic location of enviromnent (CONFIG_ENV_OFFSET_OOB) Ben Gardiner
2010-05-26 22:58 ` Scott Wood
2010-05-26 23:38 ` Ben Gardiner
2010-05-31 21:29 ` [U-Boot] [PATCH v2] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB) Ben Gardiner
2010-06-30 21:32 ` [U-Boot] [PATCH v3] " Ben Gardiner
2010-06-30 21:41 ` Wolfgang Denk
2010-07-01 4:09 ` Ben Gardiner
2010-07-01 3:37 ` Vipin KUMAR
2010-07-01 5:29 ` Ben Gardiner
2010-07-01 7:17 ` Harald Welte
2010-07-05 13:57 ` Ben Gardiner
2010-07-05 17:27 ` [U-Boot] [PATCH v4] " Ben Gardiner
2010-07-12 16:17 ` Ben Gardiner
2010-07-12 16:19 ` Scott Wood
2010-07-13 19:26 ` Scott Wood
2010-07-13 21:17 ` Ben Gardiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='AANLkTikw8qafOC9NYhYEduCd7uN_pLc_badvmXV=dFqj@mail.gmail.com' \
--to=bengardiner@nanometrics.ca \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).