From: Bin Meng <bmeng.cn@gmail.com>
To: Tom Rini <trini@konsulko.com>
Cc: "Mark Kettenis" <mark.kettenis@xs4all.nl>,
"Mark Kettenis" <kettenis@openbsd.org>,
"U-Boot Mailing List" <u-boot@lists.denx.de>,
"Bharat Kumar Reddy Gooty" <bharat.gooty@broadcom.com>,
"Rayagonda Kokatanur" <rayagonda.kokatanur@broadcom.com>,
"Oliver Graute" <oliver.graute@kococonnector.com>,
"Bin Meng" <bin.meng@windriver.com>,
"Leo Yu-Chi Liang" <ycliang@andestech.com>,
"Tianrui Wei" <tianrui-wei@outlook.com>,
"Stephan Gerhold" <stephan@gerhold.net>,
"Padmarao Begari" <padmarao.begari@microchip.com>,
"Kishon Vijay Abraham I" <kishon@ti.com>,
"Heinrich Schuchardt" <xypron.glpk@gmx.de>,
"Michael Walle" <michael@walle.cc>,
"Masami Hiramatsu" <masami.hiramatsu@linaro.org>,
"Simon Glass" <sjg@chromium.org>,
"Asherah Connor" <ashe@kivikakk.ee>,
"Wasim Khan" <wasim.khan@nxp.com>,
"Michal Simek" <michal.simek@xilinx.com>,
"Igor Opaniuk" <igor.opaniuk@foundries.io>,
"Heiko Schocher" <hs@denx.de>, "Ye Li" <ye.li@nxp.com>,
"Stefan Roese" <sr@denx.de>,
"Vabhav Sharma" <vabhav.sharma@nxp.com>,
"Marek Behún" <marek.behun@nic.cz>,
"Weijie Gao" <weijie.gao@mediatek.com>,
"AKASHI Takahiro" <takahiro.akashi@linaro.org>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Pratyush Yadav" <p.yadav@ti.com>
Subject: Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
Date: Tue, 21 Sep 2021 23:53:10 +0800 [thread overview]
Message-ID: <CAEUhbmVPk5GAQBL15uRT+uAiOMi_6z03ZQ=b5eK_Kd6wV1YCOA@mail.gmail.com> (raw)
In-Reply-To: <20210921124220.GE8579@bill-the-cat>
On Tue, Sep 21, 2021 at 8:42 PM Tom Rini <trini@konsulko.com> wrote:
>
> On Sun, Sep 19, 2021 at 10:33:25PM +0200, Mark Kettenis wrote:
> > > From: Bin Meng <bmeng.cn@gmail.com>
> > > Date: Sun, 19 Sep 2021 09:17:07 +0800
> > >
> > > Hi Mark,
> > >
> > > On Sun, Sep 19, 2021 at 9:04 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> > > >
> > > > Hi Mark,
> > > >
> > > > On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > >
> > > > > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > > > > Macs. This builds a basic U-Boot that can be used as a payload
> > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > project.
> > > > >
> > > > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > > > ---
> > > > > arch/arm/Kconfig | 22 ++++
> > > > > arch/arm/Makefile | 1 +
> > > > > arch/arm/mach-apple/Kconfig | 18 ++++
> > > > > arch/arm/mach-apple/Makefile | 4 +
> > > > > arch/arm/mach-apple/board.c | 158 ++++++++++++++++++++++++++++
> > > > > arch/arm/mach-apple/lowlevel_init.S | 16 +++
> > > > > configs/apple_m1_defconfig | 14 +++
> > > > > include/configs/apple.h | 38 +++++++
> > > > > 8 files changed, 271 insertions(+)
> > > > > create mode 100644 arch/arm/mach-apple/Kconfig
> > > > > create mode 100644 arch/arm/mach-apple/Makefile
> > > > > create mode 100644 arch/arm/mach-apple/board.c
> > > > > create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > > create mode 100644 configs/apple_m1_defconfig
> > > > > create mode 100644 include/configs/apple.h
> > > > >
> > > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > > > index b5bd3284cd..7cdea1f615 100644
> > > > > --- a/arch/arm/Kconfig
> > > > > +++ b/arch/arm/Kconfig
> > > > > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> > > > > select DM
> > > > > select GPIO_EXTRA_HEADER
> > > > >
> > > > > +config ARCH_APPLE
> > > > > + bool "Apple SoCs"
> > > > > + select ARM64
> > > > > + select LINUX_KERNEL_IMAGE_HEADER
> > > > > + select POSITION_INDEPENDENT
> > > > > + select BLK
> > > > > + select DM
> > > > > + select DM_KEYBOARD
> > > > > + select DM_SERIAL
> > > > > + select DM_USB
> > > > > + select DM_VIDEO
> > > > > + select CMD_USB
> > > > > + select MISC
> > > > > + select OF_CONTROL
> > > > > + select OF_BOARD
> > > > > + select USB
> > > > > + imply CMD_DM
> > > > > + imply CMD_GPT
> > > > > + imply DISTRO_DEFAULTS
> > > > > +
> > > > > config ARCH_OWL
> > > > > bool "Actions Semi OWL SoCs"
> > > > > select DM
> > > > > @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
> > > > > image headers.
> > > > > endif
> > > > >
> > > > > +source "arch/arm/mach-apple/Kconfig"
> > > > > +
> > > > > source "arch/arm/mach-aspeed/Kconfig"
> > > > >
> > > > > source "arch/arm/mach-at91/Kconfig"
> > > > > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > > > > index c68e598a67..44178c204b 100644
> > > > > --- a/arch/arm/Makefile
> > > > > +++ b/arch/arm/Makefile
> > > > > @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
> > > > >
> > > > > # Machine directory name. This list is sorted alphanumerically
> > > > > # by CONFIG_* macro name.
> > > > > +machine-$(CONFIG_ARCH_APPLE) += apple
> > > > > machine-$(CONFIG_ARCH_ASPEED) += aspeed
> > > > > machine-$(CONFIG_ARCH_AT91) += at91
> > > > > machine-$(CONFIG_ARCH_BCM283X) += bcm283x
> > > > > diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> > > > > new file mode 100644
> > > > > index 0000000000..66cab91b2a
> > > > > --- /dev/null
> > > > > +++ b/arch/arm/mach-apple/Kconfig
> > > > > @@ -0,0 +1,18 @@
> > > > > +if ARCH_APPLE
> > > > > +
> > > > > +config SYS_TEXT_BASE
> > > > > + default 0x00000000
> > > > > +
> > > > > +config SYS_CONFIG_NAME
> > > > > + default "apple"
> > > > > +
> > > > > +config SYS_SOC
> > > > > + default "m1"
> > > > > +
> > > > > +config SYS_MALLOC_LEN
> > > > > + default 0x4000000
> > > > > +
> > > > > +config SYS_MALLOC_F_LEN
> > > > > + default 0x4000
> > > > > +
> > > > > +endif
> > > > > diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> > > > > new file mode 100644
> > > > > index 0000000000..e74a8c9df1
> > > > > --- /dev/null
> > > > > +++ b/arch/arm/mach-apple/Makefile
> > > > > @@ -0,0 +1,4 @@
> > > > > +# SPDX-License-Identifier: GPL-2.0+
> > > > > +
> > > > > +obj-y += board.o
> > > > > +obj-y += lowlevel_init.o
> > > > > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > > > > new file mode 100644
> > > > > index 0000000000..0c8b35292e
> > > > > --- /dev/null
> > > > > +++ b/arch/arm/mach-apple/board.c
> > > > > @@ -0,0 +1,158 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > > +/*
> > > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > > + */
> > > > > +
> > > > > +#include <common.h>
> > > > > +#include <efi_loader.h>
> > > > > +
> > > > > +#include <asm/armv8/mmu.h>
> > > > > +#include <asm/global_data.h>
> > > > > +#include <asm/io.h>
> > > > > +#include <asm/system.h>
> > > > > +
> > > > > +DECLARE_GLOBAL_DATA_PTR;
> > > > > +
> > > > > +static struct mm_region apple_mem_map[] = {
> > > > > + {
> > > > > + /* I/O */
> > > > > + .virt = 0x200000000,
> > > > > + .phys = 0x200000000,
> > > > > + .size = 8UL * SZ_1G,
> > > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > + PTE_BLOCK_NON_SHARE |
> > > > > + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > + }, {
> > > > > + /* I/O */
> > > > > + .virt = 0x500000000,
> > > > > + .phys = 0x500000000,
> > > > > + .size = 2UL * SZ_1G,
> > > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > + PTE_BLOCK_NON_SHARE |
> > > > > + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > + }, {
> > > > > + /* I/O */
> > > > > + .virt = 0x680000000,
> > > > > + .phys = 0x680000000,
> > > > > + .size = SZ_512M,
> > > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > + PTE_BLOCK_NON_SHARE |
> > > > > + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > + }, {
> > > > > + /* PCIE */
> > > > > + .virt = 0x6a0000000,
> > > > > + .phys = 0x6a0000000,
> > > > > + .size = SZ_512M,
> > > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > > + PTE_BLOCK_INNER_SHARE |
> > > > > + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > + }, {
> > > > > + /* PCIE */
> > > > > + .virt = 0x6c0000000,
> > > > > + .phys = 0x6c0000000,
> > > > > + .size = SZ_1G,
> > > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > > + PTE_BLOCK_INNER_SHARE |
> > > > > + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > + }, {
> > > > > + /* RAM */
> > > > > + .virt = 0x800000000,
> > > > > + .phys = 0x800000000,
> > > > > + .size = 8UL * SZ_1G,
> > > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> > > > > + PTE_BLOCK_INNER_SHARE
> > > > > + }, {
> > > > > + /* Empty entry for framebuffer */
> > > > > + 0,
> > > > > + }, {
> > > > > + /* List terminator */
> > > > > + 0,
> > > > > + }
> > > > > +};
> > > > > +
> > > > > +struct mm_region *mem_map = apple_mem_map;
> > > > > +
> > > > > +int board_init(void)
> > > > > +{
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +int dram_init(void)
> > > > > +{
> > > > > + int index, node, ret;
> > > > > + fdt_addr_t base;
> > > > > + fdt_size_t size;
> > > > > +
> > > > > + ret = fdtdec_setup_mem_size_base();
> > > > > + if (ret)
> > > > > + return ret;
> > > > > +
> > > > > + /* Update RAM mapping. */
> > > >
> > > > nits: please remove the ending .
> > > >
> > > > > + index = ARRAY_SIZE(apple_mem_map) - 3;
> > >
> > > This is error prone. Someone else updating apple_mem_map may create an
> > > incorrect index for us.
> >
> > I don't see a better way without introducing more complexity.
> >
> > > > > + apple_mem_map[index].virt = gd->ram_base;
> > > > > + apple_mem_map[index].phys = gd->ram_base;
> > > > > + apple_mem_map[index].size = gd->ram_size;
> > > > > +
> > > > > + node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> > > > > + if (node < 0)
> > > > > + return 0;
> > > > > +
> > > > > + base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > > > > + if (base == FDT_ADDR_T_NONE)
> > > > > + return 0;
> > > > > +
> > > > > + /* Add framebuffer mapping. */
> > > >
> > > > ditto
> > > >
> > > > > + index = ARRAY_SIZE(apple_mem_map) - 2;
> > > > > + apple_mem_map[index].virt = base;
> > > > > + apple_mem_map[index].phys = base;
> > > > > + apple_mem_map[index].size = size;
> > > > > + apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > > > > + PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +int dram_init_banksize(void)
> > > > > +{
> > > > > + return fdtdec_setup_memory_banksize();
> > > > > +}
> > > > > +
> > > > > +#define APPLE_WDT_BASE 0x23d2b0000ULL
> > > > > +
> > > > > +#define APPLE_WDT_SYS_CTL_ENABLE BIT(2)
> > > > > +
> > > > > +typedef struct apple_wdt {
> > > > > + u32 reserved0[3];
> > > > > + u32 chip_ctl;
> > > > > + u32 sys_tmr;
> > > > > + u32 sys_cmp;
> > > > > + u32 reserved1;
> > > > > + u32 sys_ctl;
> > > > > +} apple_wdt_t;
> > > > > +
> > > > > +void reset_cpu(void)
> > > >
> > > > This looks like we should add a new sysreset driver for Apple Arm SoC.
> > > >
> > > > > +{
> > > > > + apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> > > > > +
> > > > > + writel(0, &wdt->sys_cmp);
> > > > > + writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> > > > > +
> > > > > + while(1)
> > > > > + wfi();
> > > > > +}
> > > > > +
> > > > > +extern long fw_dtb_pointer;
> > > > > +
> > > > > +void *board_fdt_blob_setup(void)
> > > > > +{
> > > > > + return (void *)fw_dtb_pointer;
> > > > > +}
> > > > > +
> > > > > +ulong board_get_usable_ram_top(ulong total_size)
> > > > > +{
> > > > > + /*
> > > > > + * Top part of RAM is used by firmware for things like the
> > > > > + * framebuffer. This gives us plenty of room to play with.
> > > > > + */
> > > > > + return 0x980000000;
> > > > > +}
> > > > > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > > > > new file mode 100644
> > > > > index 0000000000..0f5313163e
> > > > > --- /dev/null
> > > > > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > > > > @@ -0,0 +1,16 @@
> > > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > > +/*
> > > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > > + */
> > > > > +
> > > > > +.align 8
> > > > > +.global fw_dtb_pointer
> > > > > +fw_dtb_pointer:
> > > > > + .quad 0
> > > >
> > > > Is this filled in by m1n1?
> > >
> > > Sorry I misread, so this is passed by m1n1 and filled in by U-Boot. I
> > > think we should stop using CONFIG_OF_BOARD, and for such case we
> > > should use CONFIG_OF_PRIOR_STAGE.
> >
> > Yes, CONFIG_OF_PRIOR_STAGE would work as well. But Tom was talking
> > about removing that option in favour of CONFIG_OF_BOARD the other day.
>
> Yes. I was even looking for some feedback from you, Bin, on converting
> some boards from CONFIG_OF_PRIOR_STAGE to CONFIG_OF_BOARD. It seems
> like CONFIG_OF_PRIOR_STAGE is a subset of CONFIG_OF_BOARD, at the cost
> of possibly a few bytes.
Ah, I thought we wanted to do the other way around, by removing
CONFIG_OF_BOARD, and convert that to CONFIG_OF_PRIORI_STAGE?
Regards,
Bin
next prev parent reply other threads:[~2021-09-21 15:53 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-18 13:54 [PATCH 0/5] Apple M1 Support Mark Kettenis
2021-09-18 13:54 ` [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC Mark Kettenis
2021-09-19 1:04 ` Bin Meng
2021-09-19 1:17 ` Bin Meng
2021-09-19 20:33 ` Mark Kettenis
2021-09-21 12:42 ` Tom Rini
2021-09-21 15:53 ` Bin Meng [this message]
2021-09-21 16:04 ` Tom Rini
2021-09-21 16:08 ` Mark Kettenis
2021-09-25 13:27 ` Simon Glass
2021-09-19 20:05 ` Mark Kettenis
2021-09-20 3:15 ` Simon Glass
2021-09-20 8:49 ` Mark Kettenis
2021-09-21 1:11 ` Simon Glass
2021-09-18 13:54 ` [PATCH 2/5] serial: s5p: Add Apple M1 support Mark Kettenis
2021-09-19 1:11 ` Bin Meng
2021-09-19 20:30 ` Mark Kettenis
2021-09-20 3:15 ` Simon Glass
2021-09-25 13:27 ` Simon Glass
2021-10-02 22:15 ` Mark Kettenis
2021-10-03 2:01 ` Simon Glass
2021-09-18 13:54 ` [PATCH 3/5] misc: Add Apple DART driver Mark Kettenis
2021-09-20 3:16 ` Simon Glass
2021-09-20 8:33 ` Mark Kettenis
2021-09-21 1:11 ` Simon Glass
2021-09-25 13:27 ` Simon Glass
2021-09-26 20:53 ` Mark Kettenis
2021-09-27 20:14 ` Simon Glass
2021-09-18 13:54 ` [PATCH 4/5] arm: dts: apple: Add preliminary device trees Mark Kettenis
2021-09-20 3:16 ` Simon Glass
2021-09-25 13:27 ` Simon Glass
2021-09-18 13:54 ` [PATCH 5/5] doc: board: apple: Add Apple M1 documentation Mark Kettenis
2021-09-19 1:22 ` Bin Meng
2021-09-20 3:16 ` Simon Glass
2021-09-25 13:27 ` Simon Glass
2021-09-20 8:45 ` Igor Opaniuk
2021-09-25 1:20 ` [PATCH 0/5] Apple M1 Support Simon Glass
2021-09-25 8:11 ` Mark Kettenis
2021-09-25 13:27 ` Simon Glass
2021-09-25 13:52 ` Mark Kettenis
2021-09-25 14:42 ` Simon Glass
2021-09-25 16:45 ` Mark Kettenis
2021-09-26 15:53 ` Simon Glass
2021-09-28 3:46 ` Simon Glass
2021-09-28 7:36 ` Mark Kettenis
2021-09-28 12:07 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAEUhbmVPk5GAQBL15uRT+uAiOMi_6z03ZQ=b5eK_Kd6wV1YCOA@mail.gmail.com' \
--to=bmeng.cn@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ashe@kivikakk.ee \
--cc=bharat.gooty@broadcom.com \
--cc=bin.meng@windriver.com \
--cc=hs@denx.de \
--cc=igor.opaniuk@foundries.io \
--cc=kettenis@openbsd.org \
--cc=kishon@ti.com \
--cc=marek.behun@nic.cz \
--cc=mark.kettenis@xs4all.nl \
--cc=masami.hiramatsu@linaro.org \
--cc=michael@walle.cc \
--cc=michal.simek@xilinx.com \
--cc=oliver.graute@kococonnector.com \
--cc=p.yadav@ti.com \
--cc=padmarao.begari@microchip.com \
--cc=rayagonda.kokatanur@broadcom.com \
--cc=sjg@chromium.org \
--cc=sr@denx.de \
--cc=stephan@gerhold.net \
--cc=takahiro.akashi@linaro.org \
--cc=tianrui-wei@outlook.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vabhav.sharma@nxp.com \
--cc=wasim.khan@nxp.com \
--cc=weijie.gao@mediatek.com \
--cc=xypron.glpk@gmx.de \
--cc=ycliang@andestech.com \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).