From: Adam Ford <aford173@gmail.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: Tim Harvey <tharvey@gateworks.com>, Marek Vasut <marex@denx.de>,
Michael Nazzareno Trimarchi <michael@amarulasolutions.com>,
Fabio Estevam <festevam@denx.de>,
U-Boot Mailing List <u-boot@lists.denx.de>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Max Krummenacher <max.krummenacher@toradex.com>,
Peng Fan <peng.fan@nxp.com>, Stefano Babic <sbabic@denx.de>
Subject: Re: [PATCH 4/4] ARM: dts: imx8m: imx8mm-mx8menlo: Enable SPL SDP support
Date: Mon, 26 Sep 2022 12:28:02 -0500 [thread overview]
Message-ID: <CAHCN7x+U-7uxSk830N=fe8vtF4mjpcKA6mZUSN-nzrhpPo+JVw@mail.gmail.com> (raw)
In-Reply-To: <CAOMZO5CSXf_saC4SNmPg_ow5oa7LcRF+BtvkgqCdRxb=AKxjhg@mail.gmail.com>
On Mon, Sep 26, 2022 at 12:12 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Adam,
>
> On Mon, Sep 26, 2022 at 2:07 PM Adam Ford <aford173@gmail.com> wrote:
>
> > Tim,
> >
> > I have it building successfully now, and it loads over USB. I had to
> > disable BD718x7 PMIC children binding which required a small change to
> > the PMIC driver [1]. I then removed HS400, HS200 and UHS support in
> > SPL. Once I did all that, the code size fit into SPL space.
> >
> > [1] - https://patchwork.ozlabs.org/project/uboot/patch/20220817112403.68144-2-aford173@gmail.com/
> >
> > I'll try to push my patch today or tomorrow. I was doing some other
> > clean-up, but I might just push that as a small series in itself.
>
> Ok, great.
>
> Does "ums 0 mmc 0" work for you if you run it, stop it via CTRL+C and rerun it?
>
I didn't try UMS. I was going to investigate Fastboot, but I'll give
it try this week.
> On an imx8mm_evk, I get USB errors after the CTRL+C and ums fails to
> mount after that.
Do you need to do a USB reset or anything?
adam
next prev parent reply other threads:[~2022-09-26 17:28 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-19 19:41 [PATCH 1/4] ARM: imx8m: Deduplicate CAAM init with arch_misc_init() call Marek Vasut
2022-09-19 19:41 ` [PATCH 2/4] ARM: imx8m: phycore_imx8mm: Drop bogus spl_board_init() Marek Vasut
2022-09-21 5:31 ` Peng Fan
2022-10-21 11:42 ` sbabic
2022-09-19 19:41 ` [PATCH 3/4] ARM: imx8m: verdin-imx8mm: Drop bogus content from spl_board_init() Marek Vasut
2022-09-21 5:31 ` Peng Fan
2022-10-21 11:43 ` sbabic
2022-09-19 19:41 ` [PATCH 4/4] ARM: dts: imx8m: imx8mm-mx8menlo: Enable SPL SDP support Marek Vasut
2022-09-19 22:02 ` Fabio Estevam
2022-09-24 18:38 ` Adam Ford
2022-09-24 18:52 ` Michael Nazzareno Trimarchi
2022-09-24 18:54 ` Adam Ford
2022-09-24 19:00 ` Michael Nazzareno Trimarchi
2022-09-24 19:10 ` Adam Ford
2022-09-24 19:19 ` Michael Nazzareno Trimarchi
2022-09-24 21:47 ` Marek Vasut
2022-09-24 21:54 ` Adam Ford
2022-09-26 16:58 ` Tim Harvey
2022-09-26 17:06 ` Adam Ford
2022-09-26 17:12 ` Fabio Estevam
2022-09-26 17:28 ` Adam Ford [this message]
2022-09-26 17:50 ` Sean Anderson
2022-09-26 20:04 ` Tim Harvey
2022-09-26 17:14 ` Tim Harvey
2022-09-21 5:30 ` Peng Fan
2022-09-22 2:42 ` Marek Vasut
2022-10-21 11:43 ` sbabic
2022-09-21 5:31 ` [PATCH 1/4] ARM: imx8m: Deduplicate CAAM init with arch_misc_init() call Peng Fan
2022-10-21 11:52 ` Stefano Babic
2022-10-21 11:42 ` sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAHCN7x+U-7uxSk830N=fe8vtF4mjpcKA6mZUSN-nzrhpPo+JVw@mail.gmail.com' \
--to=aford173@gmail.com \
--cc=festevam@denx.de \
--cc=festevam@gmail.com \
--cc=marcel.ziswiler@toradex.com \
--cc=marex@denx.de \
--cc=max.krummenacher@toradex.com \
--cc=michael@amarulasolutions.com \
--cc=peng.fan@nxp.com \
--cc=sbabic@denx.de \
--cc=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).