From: Jan Kiszka <jan.kiszka@siemens.com>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: Le Jin <le.jin@siemens.com>,
Bao Cheng Su <baocheng.su@siemens.com>,
Nian Gao <nian.gao@siemens.com>,
Chao Zeng <chao.zeng@siemens.com>,
Lokesh Vutla <lokeshvutla@ti.com>
Subject: [PATCH v3 0/5] Add SIMATIC IOT2050 board support
Date: Fri, 11 Jun 2021 21:42:32 +0200 [thread overview]
Message-ID: <cover.1623440557.git.jan.kiszka@siemens.com> (raw)
This is the baseline support for the SIMATIC IOT2050 devices.
Changes in v3:
- rebased
- addressed several checkpatch warnings
- a few #ifdef -> IS_ENABLED conversions
- comment marker for SPDK identifier in .S file
- trailing whitespaces
- factored out rti_wdt_load_fw (less #ifdef)
Changes in v2:
- rebased
- sync with upstream-accepted DT
- add boot switch
- include watchdog support
Allows to boot mainline 5.10 kernels, but not the original BSP-derived
kernel we currently ship as reference. This is due to the TI sysfw ABI
breakages between 2.x and 3.x. We will soon provide a transitional
kernel that allows booting both firmware ABIs - as long as full upstream
kernel support is work in progress.
Note that this baseline support lacks Ethernet drivers. We are working
closely with TI to ensure that the to-be-upstreamed icssg-prueth driver
will work both with new SR2.0 AM65x silicon as well as with SR1.0 which
is used in the currently shipped IOT2050 devices.
A staging tree for complete IOT2050 support can be found at [1]. Full
image integration is available via [2].
Jan
[1] https://github.com/siemens/u-boot/commits/jan/iot2050
[2] https://github.com/siemens/meta-iot2050
Jan Kiszka (5):
arm: dts: Add IOT2050 device tree files
board: siemens: Add support for SIMATIC IOT2050 devices
arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry
watchdog: rti_wdt: Add support for loading firmware
configs: iot2050: Enable watchdog support, but do not auto-start it
arch/arm/dts/Makefile | 7 +-
arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 105 +++
.../dts/k3-am65-iot2050-common-u-boot.dtsi | 103 +++
arch/arm/dts/k3-am65-iot2050-common.dtsi | 655 ++++++++++++++++++
arch/arm/dts/k3-am65-iot2050-spl.dts | 16 +
arch/arm/dts/k3-am65-mcu.dtsi | 9 +
arch/arm/dts/k3-am6528-iot2050-basic.dts | 67 ++
arch/arm/dts/k3-am6548-iot2050-advanced.dts | 66 ++
arch/arm/mach-k3/Kconfig | 1 +
board/siemens/iot2050/Kconfig | 32 +
board/siemens/iot2050/MAINTAINERS | 8 +
board/siemens/iot2050/Makefile | 10 +
board/siemens/iot2050/README | 65 ++
board/siemens/iot2050/board.c | 278 ++++++++
board/siemens/iot2050/config.mk | 8 +
configs/iot2050_defconfig | 146 ++++
drivers/watchdog/Kconfig | 20 +
drivers/watchdog/Makefile | 5 +
drivers/watchdog/rti_wdt.c | 72 ++
drivers/watchdog/rti_wdt_fw.S | 20 +
include/configs/iot2050.h | 60 ++
21 files changed, 1752 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
create mode 100644 arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi
create mode 100644 arch/arm/dts/k3-am65-iot2050-common.dtsi
create mode 100644 arch/arm/dts/k3-am65-iot2050-spl.dts
create mode 100644 arch/arm/dts/k3-am6528-iot2050-basic.dts
create mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced.dts
create mode 100644 board/siemens/iot2050/Kconfig
create mode 100644 board/siemens/iot2050/MAINTAINERS
create mode 100644 board/siemens/iot2050/Makefile
create mode 100644 board/siemens/iot2050/README
create mode 100644 board/siemens/iot2050/board.c
create mode 100644 board/siemens/iot2050/config.mk
create mode 100644 configs/iot2050_defconfig
create mode 100644 drivers/watchdog/rti_wdt_fw.S
create mode 100644 include/configs/iot2050.h
--
2.26.2
next reply other threads:[~2021-06-11 19:43 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-11 19:42 Jan Kiszka [this message]
2021-06-11 19:42 ` [PATCH v3 1/5] arm: dts: Add IOT2050 device tree files Jan Kiszka
2021-06-11 19:42 ` [PATCH v3 2/5] board: siemens: Add support for SIMATIC IOT2050 devices Jan Kiszka
2021-06-11 19:42 ` [PATCH v3 3/5] arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry Jan Kiszka
2021-06-11 19:42 ` [PATCH v3 4/5] watchdog: rti_wdt: Add support for loading firmware Jan Kiszka
2021-06-11 19:42 ` [PATCH v3 5/5] configs: iot2050: Enable watchdog support, but do not auto-start it Jan Kiszka
2021-07-14 9:29 ` [PATCH v3 0/5] Add SIMATIC IOT2050 board support Lokesh Vutla
2021-07-14 9:39 ` Jan Kiszka
2021-07-14 11:33 ` Lokesh Vutla
2021-07-15 6:35 ` Lokesh Vutla
2021-07-20 7:24 ` Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1623440557.git.jan.kiszka@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=baocheng.su@siemens.com \
--cc=chao.zeng@siemens.com \
--cc=le.jin@siemens.com \
--cc=lokeshvutla@ti.com \
--cc=nian.gao@siemens.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).