Util-Linux Archive on lore.kernel.org
 help / Atom feed
* [ANNOUNCE] util-linux v2.33
@ 2018-11-06 11:33 Karel Zak
  2018-11-06 12:34 ` Samuel Thibault
  2018-11-07 12:42 ` Christian Hesse
  0 siblings, 2 replies; 10+ messages in thread
From: Karel Zak @ 2018-11-06 11:33 UTC (permalink / raw)
  To: linux-kernel, linux-fsdevel, util-linux


The util-linux release v2.33 is available at

  http://www.kernel.org/pub/linux/utils/util-linux/v2.33

Feedback and bug reports, as always, are welcomed.

  Karel



Util-linux 2.33 Release Notes
=============================
 
Release highlights
------------------

choom -- NEW COMMAND to adjust and display the current OOM-killer score.

The library libsmartcols has been improved to differentiate between numbers,
booleans and strings in JSON output. The old versions uses strings everywhere.
It's recommended to re-test your applications if you parse JSON outputs from
util-linux tools.

The command fstrim(8) has been extended to trim all mounted filesystems from
/etc/fstab (-A|--fstab). This semantic is the default for systemd
fstrim.service now.  The original default for the service was to trim all
(-a|--all) mounted filesystems (including for example removable media). Now it
is also possible to test fstrim behavior by new command line option --dry-run.

The command hwclock(8) provides a new command line option --delay to overwrite
internally used delay when set clock time. The default is 0.5 (500ms) for
rtc_cmos, for another RTC types the delay is 0. If RTC type is impossible to
determine (from sysfs) then it defaults also to 0.5 to be backwardly
compatible. The 500ms default is based on commonly used MC146818A-compatible
(x86) hardware clock.

The commands mount and umount, and libmount allow to mount and umount
filesystem in another namespace. The namespace may be specified by --namespace
<pid|path> command line option. The commands switch to the namespace when it
reads /etc/fstab, writes /etc/mtab (or writes to /run/mount) and calls [u]mount
system calls, otherwise it runs in the original namespace. It means that the
target namespace does not have to contain any libraries or another requirements
necessary to execute mount(8) or umount(8) commands.

The command rename(1) provides a new command line option --interactive to ask
before overwriting.

The command setarch(8) does not require architecture when modify personality like
ADDR_NO_RANDOMIZE. The architecture argument is optional now.

The command su(1) provides a new command line option --whitelist-environment to
protect specified variables when su(1) starts a new session.

The command setpriv(1) provides a new command line option --reset-env to reset
all environment. The another new command line option --pdeathsig allows to
keep, clear or or set the parent death signal. Note that some LSMs, most notably
SELinux and AppArmor, clear the signal when the process' credentials change.

The commands fdisk(8) and sfdisk(8) print disk model name to simplify device
identification.

The command "column --table-empty-lines" allows to use empty lines in formatted 
output.

The command wipefs has been improved to postpone BLKRRPART (re-read partition
table) ioctl until all magic strings are wiped. This semantic allows to avoid
conflicts between on partition magic strings and partition tables.

The command script(1) has been extended to store more information about
terminal size and type to the typescript header. The size of the output may be
also restricted by a new command line option --output-limit.

The libblkid provides BitLocker and basic APFS detection now.

The command lsblk is possible to execute against /sys and /proc dumps if command
line option --sysroot is specified. This allows to prepare regression tests for
lsblk.  So, if you have a complicated or unusual setup (RAIDs, pools, etc) than
you can use
  https://raw.githubusercontent.com/karelzak/util-linux/master/tests/ts/lsblk/mk-input.sh
to generate the dump and send the tarball to upstream developers. (Thanks!)


The script ./configure has been improved and --with/without command line
options should be more consistent now. It's recommended to re-test your build
scripts.


Stable maintenance releases between v2.32 and v2.33
---------------------------------------------------
 
util-linux 2.32.1 [Jul 16 2018]
 
 * https://www.kernel.org/pub/linux/utils/util-linux/v2.32/v2.32.1-ReleaseNotes
   https://www.kernel.org/pub/linux/utils/util-linux/v2.32/v2.32.1-ChangeLog
 
 
Changes between v2.32 and v2.33
-------------------------------

agetty:
   - Reload only if it is really needed  [Stanislav Brabec]
   - Watch only protocol requested by issue escapes  [Stanislav Brabec]
   - agetty.8 Avoid a warning about an unbreakable line  [Bjarni Ingi Gislason]
   - cleanup code to copy to log strings  [Karel Zak]
   - cleanup issue output change, remove bool  [Karel Zak]
   - don't put the VC into canonical mode  [Lubomir Rintel]
   - don't use __u32  [Karel Zak]
   - keep c_iflags unmodified on --autologin  [Karel Zak]
   - make output more robust  [Karel Zak]
   - move all issue variables to struct  [Karel Zak]
   - rename variable changed to triggered  [Stanislav Brabec]
   - when logname is erased, re-enable reloads  [Stanislav Brabec]
bash-completion:
   - add findmnt --real --pseudo  [Karel Zak]
   - add swapon specifiers to completion  [Sami Kerola]
   - catch up with option changes  [Sami Kerola]
   - cleanup mount and umount --namespace  [Karel Zak]
   - do not print eject --cdspeed error messages  [Sami Kerola]
   - fix few bash set -u issues  [Sami Kerola]
   - fix typo in blockdev file  [Sami Kerola]
   - setpriv --securebits argument can be comma separated list  [Sami Kerola]
   - update column  [Karel Zak]
blkid:
   - (man) add note about udev encoding  [Karel Zak]
   - Encode any field which starts with LABEL in same way as LABEL field  [Pali Rohár]
   - fix compiler warnings [-Wcast-qual]  [Karel Zak]
blkzone:
   - fix report zones sector offset check  [Masato Suzuki]
   - fix whole device detection  [Karel Zak]
   - use new ul_path_* API  [Karel Zak]
blockdev:
   - use new ul_path_* API  [Karel Zak]
bugfix:
   - fix possible segfault during umount -a  [Richard Fuchs]
build:
   - Add missing -lintl linkage to lib{smartcols,uuid}  [Karel Zak]
build-sys:
   - --without-systemd disables --with-systemdsystemunitdir  [Karel Zak]
   - add -Wdiscarded-qualifiers  [Karel Zak]
   - add -Wno-cast-function-type for python  [Karel Zak]
   - add USE_LIBMOUNT_SUPPORT_NAMESPACES  [Karel Zak]
   - cleanup --with/--without help strings  [Karel Zak]
   - default to /lib64 for ${exec_prefix}/lib64  [Karel Zak]
   - extend "Could not locate the pkg-config" error message  [Karel Zak]
   - fix typo in man install  [Karel Zak]
   - improve bison version detection  [Karel Zak]
   - release++ (v2.33-rc1)  [Karel Zak]
   - release++ (v2.33-rc2)  [Karel Zak]
cal:
   - fix --span for large numbers of months  [Karel Zak]
   - use snprintf everywhere  [Karel Zak]
cfdisk:
   - fix compiler warnings [-Wcast-qual]  [Karel Zak]
   - fix compiler warnings, follow-up 7085f1e4 (#636)  [Ruediger Meier]
   - fix missing prototype for `get_wch`  [Patrick Steinhardt]
   - use uint64_t to avoid compiler warnings  [Karel Zak]
chcpu:
   - Fix maximal number of CPUs  [Stanislav Brabec]
   - use new ul_path_* API  [Karel Zak]
chmem:
   - use new ul_path_* API  [Karel Zak]
choom:
   - fix build, remove unnecessary include  [Karel Zak]
   - new command to adjust OOM-killer score value  [Karel Zak]
   - set oom_score_adj before exec  [Vaclav Dolezal]
   - use new ul_path_* API  [Karel Zak]
closestream:
   - remove dummy function __fpending()  [Sami Kerola]
column:
   - add --table-empty-lines  [Karel Zak]
   - fix leading space characters bug  [Karel Zak]
ctrlaltdel:
   - use new ul_path_* API  [Karel Zak]
dmesg:
   - fix raw output  [Karel Zak]
   - link together with syslog(2) manual page  [Sami Kerola]
docs:
   - add adjtime_config(5) man page  [Karel Zak]
   - add cal(1) TODO items  [Karel Zak]
   - add choom to TODO  [Karel Zak]
   - add fdisk to TODO  [Karel Zak]
   - add getopt to TODO  [Karel Zak]
   - add hint about script  [Karel Zak]
   - add hwclock to TODO  [Karel Zak]
   - add info about branches; update travis.yml  [Karel Zak]
   - add note about --disable-all-programs  [Karel Zak]
   - add note about lsblk to TODO  [Karel Zak]
   - add note about lsblk usage/free cols  [Karel Zak]
   - add to column(1) TODO  [Karel Zak]
   - cleanup TODO  [Karel Zak]
   - fix gtkdoc warning  [Karel Zak]
   - fix typos  [Jakub Wilk]
   - remove obsolete entry from TODO  [Karel Zak]
   - update AUTHORS file  [Karel Zak]
   - update TODO  [Karel Zak]
   - update TODO (libblkid)  [Karel Zak]
   - update TODO (lsblk)  [Karel Zak]
   - update v2.33-ReleaseNotes  [Karel Zak]
   - use SPDX license names  [Karel Zak]
eject:
   - use err() rather than abort()  [Karel Zak]
exec_shell:
   - prevent ".  applet not found" error when SHELL env is not set.  [osexp2000]
fallocate:
   - add man page note about --collapse-range granularity  [Karel Zak]
   - add missing semicolon  [Matti Niemenmaa]
   - remove unwanted debug message  [Karel Zak]
fdisk:
   - add "Disk model " to the print output  [Karel Zak]
   - fix compiler warning [-Wmaybe-uninitialized]  [Karel Zak]
   - fix error message on 'd' command  [Karel Zak]
   - fix typo in debug string  [Vaclav Dolezal]
fincore:
   - fincore.1 add missing space  [Jakub Wilk]
   - use scols_column_set_json_type()  [Karel Zak]
findmnt:
   - add --output-all option  [Sami Kerola]
   - use scols_column_set_json_type()  [Karel Zak]
fstrim:
   - Return EXIT_FAILURE when FTRIM ioctl fails  [Karel Zak]
   - add --dry-run  [Karel Zak]
   - add -A|--fstab to trim according to /etc/fstab  [Karel Zak]
   - add control struct  [Karel Zak]
   - cleanup includes  [Karel Zak]
   - update .service to follow /etc/fstab  [Karel Zak]
   - use -n shortcut for --dry-run  [Karel Zak]
   - use new ul_path_* API  [Karel Zak]
   - use new ul_path_* API, improve sysfs context usage  [Karel Zak]
hwclock:
   - add --delay <seconds>  [Karel Zak]
   - fix warning  [Karel Zak]
   - rely on kernel for RTC_UIE_ON on Aplha and Sparc  [Karel Zak]
   - remove ntpd from man page  [Karel Zak]
include/all-io:
   - const cleanup  [Karel Zak]
include/c:
   - add NAME_MAX compat  [Sevan Janiyan]
   - add str2memcpy() and mem2strcpy()  [Karel Zak]
include/list, include/c:
   - update and container_of()  [Karel Zak]
include/path:
   - make sure PATH_MAX is defined  [Karel Zak]
include/pt-mbr.h:
   - fix integer overflow  [Sami Kerola]
include/strutils:
   - remove unnecessary cast  [Karel Zak]
include/ttyutils:
   - define values if missing.  [Sevan Janiyan]
ipcs:
   - use new ul_path_* API  [Karel Zak]
ipcs,chmem:
   - fix access() usage  [Ruediger Meier]
iscript:
   - s/COLS/COLUMNS/ in start message  [Karel Zak]
last:
   - fix false positive compiler warning  [Sami Kerola]
   - make sure domain is zero terminated  [Karel Zak]
lib/canonicalize:
   - fix truncation warning  [Sami Kerola]
lib/color-names:
   - const cleanup  [Karel Zak]
lib/colors:
   - fix compiler warnings [-Wcast-qual]  [Karel Zak]
lib/loopdev:
   - fix compiler warning [-Wcast-qual]  [Karel Zak]
   - remove obsolete macro  [Karel Zak]
   - use new ul_path_* API  [Karel Zak]
lib/mangle:
   - const quialifier cleanup  [Karel Zak]
lib/pager:
   - fix compiler warning [-Wrestrict]  [Karel Zak]
lib/path:
   - add more debug messages  [Karel Zak]
   - add ul_path_get_abspath()  [Karel Zak]
   - add ul_path_read_buffer()  [Karel Zak]
   - add ul_prefix_fopen(), improve cpuset funcs  [Karel Zak]
   - allow dir-path formatting  [Karel Zak]
   - don't use extra '/'  [Karel Zak]
   - fix read string to be backwardly compatible  [Karel Zak]
   - improve debug message on redirect  [Karel Zak]
   - make ul_path_read_ usable with NULL handler  [Karel Zak]
   - new implementation  [Karel Zak]
   - remove unused expression  [Ruediger Meier]
   - simplify debug message  [Karel Zak]
lib/path lib/sysfs:
   - add debug  [Karel Zak]
lib/strutils:
   - fix strnlen() fallback  [Karel Zak]
   - follow const in parse_size()  [Karel Zak]
   - remove redundant condition  [Karel Zak]
   - return from xstrmode()  [Karel Zak]
lib/sysfs:
   - add sysfs_blkdev_get_parent()  [Karel Zak]
   - add ul_new_sysfs_path() shortcut  [Karel Zak]
   - cleanup function names  [Karel Zak]
   - fix sysfs_blkdev_get_wholedisk()  [Karel Zak]
   - fix ul_path_read_string() usage  [Karel Zak]
   - make possible to call sysfs_blkdev_deinit_path() in loop  [Karel Zak]
   - new implementation  [Karel Zak]
libblkid:
   - (hfs) check allocation size  [Karel Zak]
   - (ntfs) enlarge cluster limit to 2MB  [Karel Zak, Jean-Pierre André]
   - (ntfs) fix cluster size check  [Karel Zak]
   - (zfs) fix compiler warning [-Wmaybe-uninitialized]  [Karel Zak]
   - Add more APFS checking to avoid false positives  [Harry Mallon]
   - Add very basic APFS recognition  [Harry Mallon]
   - Check for a secondary LUKS2 header.  [Milan Broz]
   - add BitLocker detection  [Karel Zak]
   - const qualifier cleanup  [Karel Zak]
   - udf  Fix reporting UDF 2.60 revision  [Pali Rohár]
   - use new ul_path_* API  [Karel Zak]
   - use xstrncpy() for PT id [coverity scan]  [Karel Zak]
   - vfat  Change parsing label in special cases  [Pali Rohár]
libfdisk:
   - (docs) add missing function  [Karel Zak]
   - (docs) fix section name  [Karel Zak]
   - Accept negative numbers for last sector input  [Awal Garg]
   - Fix multipath partition seperators for user-friendly names  [KyleMahlkuch]
   - accept grain script header  [Karel Zak]
   - add fdisk_get_devmodel() and fdisk_get_devno()  [Karel Zak]
   - count gaps to possible size when resize  [Karel Zak]
   - fix OSX compiler warning  [Ruediger Meier]
   - fix compiler warning [-Wmaybe-uninitialized]  [Karel Zak]
   - fix compiler warning [-Wunused-parameter]  [Karel Zak]
   - fix compiler warnings [-Wcast-qual]  [Karel Zak]
   - fix list_del after partition reset  [Vaclav Dolezal]
   - fix printf format modifier  [Ruediger Meier]
   - improve JSON output  [Karel Zak]
   - reduce number of asprintf() calls, check return value  [Karel Zak]
   - use \x<hex> to read/write partition name  [Karel Zak]
   - use new ul_path_* API  [Karel Zak]
libmount:
   - (mountinfo) parse empty strings in source  [Alban Crequy]
   - (utils) fix compiler warnings [-Wcast-qual]  [Karel Zak]
   - accept another flags on MS_REMOUNT|MS_BIND  [Karel Zak]
   - add missing const  [Karel Zak]
   - add since tag for new functions  [Karel Zak]
   - add support for switching namespaces  [Vaclav Dolezal]
   - added error MNT_ERR_NAMESPACE  [Vaclav Dolezal]
   - cleanup const in umount code  [Karel Zak]
   - cleanup licenses sections in the files  [Karel Zak]
   - don't use MS_MGC_VAL magic in mount(2) syscall  [Karel Zak]
   - fix compiler warning [-Wcast-qual]  [Karel Zak]
   - fix compiler warning [-Wunused-parameter]  [Karel Zak]
   - fix mnt_table_is_fs_mounted() for NFS bind mounts.  [NeilBrown]
   - improve MS_REC usage  [Karel Zak]
   - improve docs about mnt_context_mount() return codes  [Karel Zak]
   - include sys/mount.h on Linux only  [Karel Zak]
   - include sys/mount.h only if necessary  [Karel Zak]
   - keep namespaces support optional  [Karel Zak]
   - make errno usable after mnt_context_set_target_ns()  [Karel Zak]
   - note namespaces in mnt_reset_context() docs  [Vaclav Dolezal]
   - report context paths on debug  [Karel Zak]
   - support for namespaces for helpers  [Vaclav Dolezal]
   - switch namespace when appropriate  [Vaclav Dolezal]
   - use const char in fstab parser  [Karel Zak]
   - use const char in mountinfo parser  [Karel Zak]
   - use const char in swaps parser  [Karel Zak]
libsmartcols:
   - allow to add line to table without columns  [Karel Zak]
   - don't mark as extreme where average is zero  [Karel Zak]
   - don't print empty column  [Karel Zak]
   - improve JSON support (add types)  [Karel Zak]
   - make sure boolean is true/false only  [Karel Zak]
libuuid:
   - add note about RFC4122 UUID layout  [Karel Zak]
   - fix name-based UUIDs  [Karel Zak]
logger:
   - Define SD_JOURNAL_SUPPRESS_LOCATION.  [YmrDtnJu]
   - add -S to the man page  [Karel Zak]
login:
   - cleanup code to copy to log strings  [Karel Zak]
   - use const qualifier for username from PAM or struct passwd [-Wcast-qual]  [Karel Zak]
losetup:
   - add --output-all option  [Sami Kerola]
   - add reference to suffixes for --{sizelimit,offset}  [Karel Zak]
   - fix mem leak, improve code [coverity scan]  [Karel Zak]
   - keep -f and <devname> mutually exclusive  [Karel Zak]
   - use scols_column_set_json_type()  [Karel Zak]
lsblk:
   - add --sysroot  [Karel Zak]
   - add PATH column  [Karel Zak]
   - add columns FSAVAIL,FSSIZE,FSUSED,FSUSE%  [Karel Zak]
   - add lsblk.h  [Karel Zak]
   - add note about --list -I <maj,...>  [Karel Zak]
   - add partition table UUID and type fields.  [Milan Broz]
   - always use "part" as TYPE for partitions  [Karel Zak]
   - cleanup udev/blkid properties code  [Karel Zak]
   - consolidate column types for JSON and qsort()  [Karel Zak]
   - differentiate between swap and mount  [Karel Zak]
   - document --sysroot  [Karel Zak]
   - don't ask udev when --sysroot specified  [Karel Zak]
   - don't exclude RAM disks on --all  [Karel Zak]
   - encapsulate stat() usage  [Karel Zak]
   - fix COL_SCHED  [Karel Zak]
   - fix notes about RAM disks  [Karel Zak]
   - fix sysfs_devno_to_devname() usage  [Karel Zak]
   - fix ul_path_read_string() usage  [Karel Zak]
   - fix unknown type `stat` caused by missing header  [Patrick Steinhardt]
   - follow --sysroot when read mountpoints  [Karel Zak]
   - init/deinit libmount stuff  [Karel Zak]
   - move mount stuff to lsblk-mnt.c  [Karel Zak]
   - move udev and blkid stuff to lsblk-properties.c  [Karel Zak]
   - prefer MODEL from udev DB  [Karel Zak]
   - use lsblk_ prefix mountpoint getter  [Karel Zak]
   - use new ul_path_* API  [Karel Zak]
   - use prefix for DM name  [Karel Zak]
lscpu:
   - Cortex-A12 merged into Cortex-A17  [Karel Zak]
   - add 'Address sizes'  [Karel Zak]
   - add --output-all option  [Sami Kerola]
   - fix resource leak [coverity scan]  [Karel Zak]
   - fixed part ID for ARM Cortex-M7  [Mark Sheppard]
   - make xasprintf call more robust  [Karel Zak]
   - use new ul_path_* API  [Karel Zak]
   - use the first VM from /proc/sysinfo  [Karel Zak]
lscpu, chcpu:
   - Avoid use of the old CPU macros  [Stanislav Brabec]
lsipc:
   - cleanup columns[] usage  [Karel Zak]
lslocks:
   - add --bytes cleanup SIZE usage  [Karel Zak]
   - add --output-all option  [Sami Kerola]
   - add info about OFD  [Karel Zak]
   - fix memory leak  [Karel Zak]
   - use scols_column_set_json_type()  [Karel Zak]
lslogins:
   - add --output-all option  [Sami Kerola]
   - add -o+<COLNAME> support  [Karel Zak]
   - add PWD-METHOD column  [Karel Zak]
   - add info about single-user output mode  [Karel Zak]
   - fix password verification  [Karel Zak]
   - remove redundant condition  [Karel Zak]
   - return 1 on "lslogins nonexisting"  [Karel Zak]
lsmem:
   - add --output-all option  [Sami Kerola]
   - improve JSON output  [Karel Zak]
   - make output more compatible with another utils  [Karel Zak]
   - remove unused variable  [Karel Zak]
   - use new ul_path_* API  [Karel Zak]
lsns:
   - add --output-all option  [Sami Kerola]
   - remove unnecessary include  [Karel Zak]
   - use scols_column_set_json_type()  [Karel Zak]
man:
   - Change the only argument to two for the two-fonts macros  [Bjarni Ingi Gislason]
   - Use the correct macro for a font change of one argument  [Bjarni Ingi Gislason]
   - choom.1  Use the correct macro for the font change of one argument  [Bjarni Ingi Gislason]
man pages:
   - Fix misuse of two-fonts-macros (BR, IR)  [Bjarni Ingi Gislason]
   - Remove "left" (or change to "l") in the column formats of tables  [Bjarni Ingi Gislason]
   - fix formatting of long lines in tables  [Bjarni Ingi Gislason]
mesg:
   - do not print 'ttyname failed' message unless --verbose requested  [Sami Kerola]
misc-tools/findmnt:
   - a few whitespace fixes  [sluidfoe]
   - add --pseudo, --real filters  [sluidfoe]
misc-utils/findmnt:
   - misc-utils/findmnt.8 add --pseudo and --real options  [sluidfoe]
misc-utils/getopt:
   - misc-utils/getopt.1 minor corrections to the manual  [Bjarni Ingi Gislason]
mkfs.cramfs:
   - properly copy disk name  [Karel Zak]
   - remove redundant condition  [Karel Zak]
mkswap:
   - fix compiler warnings [-Wcast-qual]  [Karel Zak]
more:
   - do not call fileno() for std{in,out,err} streams  [Sami Kerola]
   - move couple functions  [Sami Kerola]
   - remove 'register' keywords  [Sami Kerola]
   - remove dead code and useless comments  [Sami Kerola]
   - remove function like preprocessor defines  [Sami Kerola]
   - remove function prototypes  [Sami Kerola]
   - remove global variables, add struct more_control  [Sami Kerola]
   - remove pointless functions  [Sami Kerola]
   - remove unnecessary ifdef preprosessor directives  [Sami Kerola]
   - rename functions  [Sami Kerola]
   - rename variable names  [Sami Kerola]
   - reorder global declarations  [Sami Kerola]
   - return is statement not a function  [Sami Kerola]
mount:
   - add -N to man page helpers section  [Karel Zak]
   - add details about mtab and --namespace to mount.8  [Karel Zak]
   - add ext4 to some places to the man page  [Karel Zak]
   - add note about MS_BIND and _netdev  [Karel Zak]
   - add support for namespaces  [Vaclav Dolezal]
   - added options exposing libmount's optsmode  [Vaclav Dolezal]
   - allow PID as --namespace argument  [Vaclav Dolezal]
   - document --namespace in man/help  [Vaclav Dolezal]
   - document --options-* in man/help  [Vaclav Dolezal]
   - keep MS_MOVE as flag  [Karel Zak]
   - more notes about --options-* to man page  [Karel Zak]
   - use internally string to set move/bind operations  [Karel Zak]
   - use string_to_bitmask()  [Vaclav Dolezal]
mount(8):
   - clarify behavior of --options-mode  [Vaclav Dolezal]
mountpoint:
   - simplify test condition [cppcheck]  [Sami Kerola]
namei:
   - provide more usable error message on lstat() error  [Karel Zak]
nls:
   - remove translation strings  [Sami Kerola]
partx:
   - add --output-all option  [Sami Kerola]
   - exit with error code when partition read failed  [Andreas Henriksson]
   - use new ul_path_* API  [Karel Zak]
po:
   - fix lsblk translation  [Karel Zak]
   - merge changes  [Karel Zak]
   - pt_BR  fix fallocate '-l' help msg  [Luiz Angelo Daros de Luca]
   - update cs.po (from translationproject.org)  [Petr Písař]
   - update es.po (from translationproject.org)  [Antonio Ceballos Roa]
   - update fr.po (from translationproject.org)  [Frédéric Marchal]
   - update ja.po (from translationproject.org)  [Takeshi Hamasaki]
   - update pl.po (from translationproject.org)  [Jakub Bogusz]
   - update pt_BR.po (from translationproject.org)  [Rafael Fontenelle]
   - update sv.po (from translationproject.org)  [Sebastian Rasmussen]
   - update uk.po (from translationproject.org)  [Yuri Chornoivan]
rename:
   - add option --interactive to ask before overwriting  [G.raud Meyer]
   - ask()  call __fpurge() to cater for multi-byte characters  [G.raud Meyer]
   - ask()  print n when EOF on input  [G.raud Meyer]
   - avoid undefined function prototype for `fpurge`  [Patrick Steinhardt]
   - check source file access early  [G.raud Meyer]
   - consolidate printing the symlink in addition to its target  [G.raud Meyer]
   - detect tty in cbreak mode to make ask() read a single byte  [G.raud Meyer]
   - fix/reverse the semantics of --no-overwrite in --symlink mode  [G.raud Meyer]
   - fixup & style (no functional changes)  [G.raud Meyer]
   - prevent --no-act from setting --no-overwrite  [G.raud Meyer]
   - rename.1 describe interactive mode  [G.raud Meyer]
   - rename.1 fix warning section  [G.raud Meyer]
   - skip faccessat() failure if AT_SYMLINK_NOFOLLOW is not a valid flag  [G.raud Meyer]
   - test availability of __fpurge() and fpurge()  [G.raud Meyer]
   - when --no-overwrite skip verbosily only when --verbose  [G.raud Meyer]
resizepart:
   - use new ul_path_* API  [Karel Zak]
rev:
   - move a global variable to local scope  [Sami Kerola]
rfkill:
   - add --output-all option  [Sami Kerola]
   - don't use lib/path  [Karel Zak]
   - include <poll.h> instead of <sys/poll.h>  [Patrick Steinhardt]
   - use scols_column_set_json_type()  [Karel Zak]
script:
   - add more info to script header  [Karel Zak]
   - add the -o/--output-limit option. Fix race test.  [Fred Mora]
   - be sensitive to another SIGCHLD ssi_codes  [Karel Zak]
   - cleanup done timestamp message  [Karel Zak]
   - fix printf format specifiers  [Ruediger Meier]
   - record exit code  [Karel Zak]
   - use uint64_t for file sizes  [Karel Zak]
setarch:
   - add another PER_LINUX32 aliases for ppcle  [Karel Zak]
   - make <arch> optional  [Karel Zak]
   - split set_arch() function to small functions  [Karel Zak]
setpriv:
   - add --reset-env  [Karel Zak]
   - add user/group names to usage()  [Karel Zak]
   - allow to use group name for --groups  [Karel Zak]
   - implement option to set parent death signal  [Patrick Steinhardt]
setterm:
   - fix compiler warnings [-Wcast-qual]  [Karel Zak]
sfdisk:
   - be more verbose about PMBR on --activate  [Karel Zak]
   - disable --activate for Hybrid GPT/MBR  [Karel Zak]
   - document script GPT headers  [Karel Zak]
su:
   - add --whitelist-environment  [Karel Zak]
   - add note about SIGKILL to the man page  [Karel Zak]
   - add note about merged /usr  [Karel Zak]
   - cleanup code to copy to log strings  [Karel Zak]
sulogin:
   - do not use plain 0 as NULL  [Karel Zak]
   - restore signals after failed exec() only  [Karel Zak]
swapon:
   - add --output-all option  [Sami Kerola]
   - fix compiler warnings [-Wcast-qual]  [Karel Zak]
sys-utils/fallocate:
   - sys-utils/fallocate.1 Some tidying of the manual  [Bjarni Ingi Gislason]
test:
   - update UUID v5 tests  [Karel Zak]
tests:
   - Add tests for FAT32 labels  [Pali Rohár]
   - add cal --span tests  [Karel Zak]
   - add choom to build-sys test  [Karel Zak]
   - add column --table-empty-lines test  [Karel Zak]
   - add empty column test  [Karel Zak]
   - add lsblk test script  [Karel Zak]
   - add mountinfo with empty source  [Karel Zak]
   - add simple & stupid script to generate lsblk /sys and /proc dump  [Karel Zak]
   - add simple ATA and NVME lsblk dump  [Karel Zak]
   - add simple LVM lsblk dump  [Karel Zak]
   - check for test_cal  [Karel Zak]
   - move stderr redirection out from test expression  [Sami Kerola]
   - remove debug stuff from ts/script/options  [Karel Zak]
   - remove namei(1) failed lstat test  [Karel Zak]
   - update JSON outputs  [Karel Zak]
   - update column(1) space-separator test  [Karel Zak]
   - update fdisk dialogs  [Karel Zak]
   - update fdisk output  [Karel Zak]
   - update lscpu tests  [Karel Zak]
   - update script done messages  [Karel Zak]
   - update script headers  [Karel Zak]
   - update sfdisk JSON output  [Karel Zak]
   - update sfdisk resize  [Karel Zak]
umount:
   - add --quiet option  [Karel Zak]
   - add note about --lazy  [Karel Zak]
   - add support for namespaces  [Vaclav Dolezal]
   - allow PID as --namespace argument  [Vaclav Dolezal]
   - fix behaviour of -A and -R with --namespace  [Vaclav Dolezal]
unshare:
   - remove -s from --help output  [Karel Zak]
wall:
   - make sure line is zero terminated  [Karel Zak]
wipefs:
   - add missing ifdef  [Ruediger Meier]
   - postpone BLKRRPART until all is done  [Karel Zak]
   - use scols_column_set_json_type()  [Karel Zak]
zramctl:
   - (man) explain that --find is necessary  [Karel Zak]
   - add --output-all option  [Sami Kerola]
   - fix truncation warning  [Sami Kerola]
   - use new ul_path_* API  [Karel Zak]

-- 
 Karel Zak  <kzak@redhat.com>
 http://karelzak.blogspot.com

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [ANNOUNCE] util-linux v2.33
  2018-11-06 11:33 [ANNOUNCE] util-linux v2.33 Karel Zak
@ 2018-11-06 12:34 ` Samuel Thibault
  2018-11-07  1:20   ` Carlos Santos
  2018-11-12 10:39   ` Karel Zak
  2018-11-07 12:42 ` Christian Hesse
  1 sibling, 2 replies; 10+ messages in thread
From: Samuel Thibault @ 2018-11-06 12:34 UTC (permalink / raw)
  To: Karel Zak; +Cc: util-linux

[-- Attachment #1: Type: text/plain, Size: 318 bytes --]

Hello,

Karel Zak, le mar. 06 nov. 2018 12:33:06 +0100, a ecrit:
> The util-linux release v2.33 is available at
> 
>   http://www.kernel.org/pub/linux/utils/util-linux/v2.33
> 
> Feedback and bug reports, as always, are welcomed.

It seems new portability issues came in since the rc I tested :)
Fix attached.

Samuel

[-- Attachment #2: fix --]
[-- Type: text/plain, Size: 1255 bytes --]

Index: util-linux-2.33/term-utils/agetty.c
===================================================================
--- util-linux-2.33.orig/term-utils/agetty.c
+++ util-linux-2.33/term-utils/agetty.c
@@ -1768,6 +1768,7 @@ static void eval_issue_file(struct issue
 }
 #else /* ISSUE_SUPPORT */
 
+#ifdef AGETTY_RELOAD
 static int issue_is_changed(struct issue *ie)
 {
 	if (ie->mem_old && ie->mem
@@ -1780,6 +1781,7 @@ static int issue_is_changed(struct issue
 
 	return 1;
 }
+#endif
 
 static void print_issue_file(struct issue *ie,
 			     struct options *op,
@@ -2066,8 +2068,8 @@ static char *get_logname(struct issue *i
 		/* Write issue file and prompt */
 		do_prompt(ie, op, tp);
 
-#ifdef AGETTY_RELOAD
 	no_reload:
+#ifdef AGETTY_RELOAD
 		if (!wait_for_term_input(STDIN_FILENO)) {
 			/* refresh prompt -- discard input data, clear terminal
 			 * and call do_prompt() again
@@ -2731,6 +2733,7 @@ static void output_special_char(struct i
 			fprintf (ie->output, "%d ", users);
 		break;
 	}
+#if defined(RTMGRP_IPV4_IFADDR) && defined(RTMGRP_IPV6_IFADDR)
 	case '4':
 	case '6':
 	{
@@ -2754,6 +2757,7 @@ static void output_special_char(struct i
 			netlink_groups |= RTMGRP_IPV6_IFADDR;
 		break;
 	}
+#endif
 	default:
 		putchar(c);
 		break;

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [ANNOUNCE] util-linux v2.33
  2018-11-06 12:34 ` Samuel Thibault
@ 2018-11-07  1:20   ` Carlos Santos
  2018-11-07  9:49     ` Karel Zak
  2018-11-12 10:39   ` Karel Zak
  1 sibling, 1 reply; 10+ messages in thread
From: Carlos Santos @ 2018-11-07  1:20 UTC (permalink / raw)
  To: Samuel Thibault; +Cc: Karel Zak, util-linux

> From: "Samuel Thibault" <samuel.thibault@ens-lyon.org>
> To: "Karel Zak" <kzak@redhat.com>
> Cc: "util-linux" <util-linux@vger.kernel.org>
> Sent: Terça-feira, 6 de novembro de 2018 10:34:02
> Subject: Re: [ANNOUNCE] util-linux v2.33

> Hello,
> 
> Karel Zak, le mar. 06 nov. 2018 12:33:06 +0100, a ecrit:
>> The util-linux release v2.33 is available at
>> 
>>   http://www.kernel.org/pub/linux/utils/util-linux/v2.33
>> 
>> Feedback and bug reports, as always, are welcomed.
> 
> It seems new portability issues came in since the rc I tested :)
> Fix attached.
> 
> Samuel

Could you please explain what portability issues your patch fixes?

Also, could you re-generate the patch with git format-patch and add
a Signed-off-by line, so I can use it in the Buildroot package?

Thanks in advance.

-- 
Carlos Santos (Casantos) - DATACOM, P&D
“Marched towards the enemy, spear upright, armed with the certainty
that only the ignorant can have.” — Epitaph of a volunteer

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [ANNOUNCE] util-linux v2.33
  2018-11-07  1:20   ` Carlos Santos
@ 2018-11-07  9:49     ` Karel Zak
  2018-11-07 10:02       ` Samuel Thibault
  0 siblings, 1 reply; 10+ messages in thread
From: Karel Zak @ 2018-11-07  9:49 UTC (permalink / raw)
  To: Carlos Santos; +Cc: Samuel Thibault, util-linux

On Tue, Nov 06, 2018 at 11:20:08PM -0200, Carlos Santos wrote:
> > From: "Samuel Thibault" <samuel.thibault@ens-lyon.org>
> > To: "Karel Zak" <kzak@redhat.com>
> > Cc: "util-linux" <util-linux@vger.kernel.org>
> > Sent: Terça-feira, 6 de novembro de 2018 10:34:02
> > Subject: Re: [ANNOUNCE] util-linux v2.33
> 
> > Hello,
> > 
> > Karel Zak, le mar. 06 nov. 2018 12:33:06 +0100, a ecrit:
> >> The util-linux release v2.33 is available at
> >> 
> >>   http://www.kernel.org/pub/linux/utils/util-linux/v2.33
> >> 
> >> Feedback and bug reports, as always, are welcomed.
> > 
> > It seems new portability issues came in since the rc I tested :)
> > Fix attached.
> > 
> > Samuel
> 
> Could you please explain what portability issues your patch fixes?

The reload agetty feature depends on inotify (netlink, ....). I guess
it's unsupported by GNU Hurd.

    Karel

-- 
 Karel Zak  <kzak@redhat.com>
 http://karelzak.blogspot.com

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [ANNOUNCE] util-linux v2.33
  2018-11-07  9:49     ` Karel Zak
@ 2018-11-07 10:02       ` Samuel Thibault
  0 siblings, 0 replies; 10+ messages in thread
From: Samuel Thibault @ 2018-11-07 10:02 UTC (permalink / raw)
  To: Karel Zak; +Cc: Carlos Santos, util-linux

Karel Zak, le mer. 07 nov. 2018 10:49:56 +0100, a ecrit:
> On Tue, Nov 06, 2018 at 11:20:08PM -0200, Carlos Santos wrote:
> > > From: "Samuel Thibault" <samuel.thibault@ens-lyon.org>
> > > To: "Karel Zak" <kzak@redhat.com>
> > > Cc: "util-linux" <util-linux@vger.kernel.org>
> > > Sent: Terça-feira, 6 de novembro de 2018 10:34:02
> > > Subject: Re: [ANNOUNCE] util-linux v2.33
> > 
> > > Hello,
> > > 
> > > Karel Zak, le mar. 06 nov. 2018 12:33:06 +0100, a ecrit:
> > >> The util-linux release v2.33 is available at
> > >> 
> > >>   http://www.kernel.org/pub/linux/utils/util-linux/v2.33
> > >> 
> > >> Feedback and bug reports, as always, are welcomed.
> > > 
> > > It seems new portability issues came in since the rc I tested :)
> > > Fix attached.
> > > 
> > > Samuel
> > 
> > Could you please explain what portability issues your patch fixes?
> 
> The reload agetty feature depends on inotify (netlink, ....). I guess
> it's unsupported by GNU Hurd.

Yes, and the #ifdef AGETTY_RELOAD are incoherent: issue_is_changed
accesses fields which are not defined when AGETTY_RELOAD is not defined,
and no_reload is used in pieces of code where AGETTY_RELOAD is not
defined.

Samuel

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [ANNOUNCE] util-linux v2.33
  2018-11-06 11:33 [ANNOUNCE] util-linux v2.33 Karel Zak
  2018-11-06 12:34 ` Samuel Thibault
@ 2018-11-07 12:42 ` Christian Hesse
  2018-11-07 12:55   ` [PATCH 1/1] agetty: fix output of escaped characters Christian Hesse
  1 sibling, 1 reply; 10+ messages in thread
From: Christian Hesse @ 2018-11-07 12:42 UTC (permalink / raw)
  To: Karel Zak; +Cc: util-linux

[-- Attachment #1: Type: text/plain, Size: 806 bytes --]

Karel Zak <kzak@redhat.com> on Tue, 2018/11/06 12:33:
> The util-linux release v2.33 is available at
> 
>   http://www.kernel.org/pub/linux/utils/util-linux/v2.33
> 
> Feedback and bug reports, as always, are welcomed.

This breaks printing of (escaped) backslash in /etc/issue. We have
a downstream bug report in Arch Linux bugtracker [0] including issue file
that triggers the behaviour. The bad commit is 6522d88d [1].

[0] https://bugs.archlinux.org/task/60731
[1]
https://github.com/karelzak/util-linux/commit/6522d88d08ffbba528e15ab4e081fb2846bac03d
-- 
main(a){char*c=/*    Schoene Gruesse                         */"B?IJj;MEH"
"CX:;",b;for(a/*    Best regards             my address:    */=0;b=c[a++];)
putchar(b-1/(/*    Chris            cc -ox -xc - && ./x    */b/42*2-3)*42);}

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 1/1] agetty: fix output of escaped characters
  2018-11-07 12:42 ` Christian Hesse
@ 2018-11-07 12:55   ` Christian Hesse
  2018-11-07 13:19     ` Karel Zak
  2018-11-12 10:39     ` Karel Zak
  0 siblings, 2 replies; 10+ messages in thread
From: Christian Hesse @ 2018-11-07 12:55 UTC (permalink / raw)
  To: Karel Zak; +Cc: util-linux, Christian Hesse

From: Christian Hesse <mail@eworm.de>

Signed-off-by: Christian Hesse <mail@eworm.de>
---
 term-utils/agetty.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/term-utils/agetty.c b/term-utils/agetty.c
index 05a269abb..b9f08728e 100644
--- a/term-utils/agetty.c
+++ b/term-utils/agetty.c
@@ -2755,7 +2755,7 @@ static void output_special_char(struct issue *ie,
 		break;
 	}
 	default:
-		putchar(c);
+		putc(c, ie->output);
 		break;
 	}
 }

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/1] agetty: fix output of escaped characters
  2018-11-07 12:55   ` [PATCH 1/1] agetty: fix output of escaped characters Christian Hesse
@ 2018-11-07 13:19     ` Karel Zak
  2018-11-12 10:39     ` Karel Zak
  1 sibling, 0 replies; 10+ messages in thread
From: Karel Zak @ 2018-11-07 13:19 UTC (permalink / raw)
  To: Christian Hesse; +Cc: util-linux, Christian Hesse

On Wed, Nov 07, 2018 at 01:55:06PM +0100, Christian Hesse wrote:
> From: Christian Hesse <mail@eworm.de>
> 
> Signed-off-by: Christian Hesse <mail@eworm.de>
> ---
>  term-utils/agetty.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/term-utils/agetty.c b/term-utils/agetty.c
> index 05a269abb..b9f08728e 100644
> --- a/term-utils/agetty.c
> +++ b/term-utils/agetty.c
> @@ -2755,7 +2755,7 @@ static void output_special_char(struct issue *ie,
>  		break;
>  	}
>  	default:
> -		putchar(c);
> +		putc(c, ie->output);
>  		break;

Seems we need 2.33.1 ASAP.

(by the way this bug is also in v2.33-rc2, unfortunately badly tested...)

    Karel

-- 
 Karel Zak  <kzak@redhat.com>
 http://karelzak.blogspot.com

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [ANNOUNCE] util-linux v2.33
  2018-11-06 12:34 ` Samuel Thibault
  2018-11-07  1:20   ` Carlos Santos
@ 2018-11-12 10:39   ` Karel Zak
  1 sibling, 0 replies; 10+ messages in thread
From: Karel Zak @ 2018-11-12 10:39 UTC (permalink / raw)
  To: Samuel Thibault, util-linux

On Tue, Nov 06, 2018 at 01:34:02PM +0100, Samuel Thibault wrote:
> --- util-linux-2.33.orig/term-utils/agetty.c
> +++ util-linux-2.33/term-utils/agetty.c

Applied, thanks.

-- 
 Karel Zak  <kzak@redhat.com>
 http://karelzak.blogspot.com

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/1] agetty: fix output of escaped characters
  2018-11-07 12:55   ` [PATCH 1/1] agetty: fix output of escaped characters Christian Hesse
  2018-11-07 13:19     ` Karel Zak
@ 2018-11-12 10:39     ` Karel Zak
  1 sibling, 0 replies; 10+ messages in thread
From: Karel Zak @ 2018-11-12 10:39 UTC (permalink / raw)
  To: Christian Hesse; +Cc: util-linux, Christian Hesse

On Wed, Nov 07, 2018 at 01:55:06PM +0100, Christian Hesse wrote:
>  term-utils/agetty.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied, thanks.


-- 
 Karel Zak  <kzak@redhat.com>
 http://karelzak.blogspot.com

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-06 11:33 [ANNOUNCE] util-linux v2.33 Karel Zak
2018-11-06 12:34 ` Samuel Thibault
2018-11-07  1:20   ` Carlos Santos
2018-11-07  9:49     ` Karel Zak
2018-11-07 10:02       ` Samuel Thibault
2018-11-12 10:39   ` Karel Zak
2018-11-07 12:42 ` Christian Hesse
2018-11-07 12:55   ` [PATCH 1/1] agetty: fix output of escaped characters Christian Hesse
2018-11-07 13:19     ` Karel Zak
2018-11-12 10:39     ` Karel Zak

Util-Linux Archive on lore.kernel.org

Archives are clonable: git clone --mirror https://lore.kernel.org/util-linux/0 util-linux/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 util-linux util-linux/ https://lore.kernel.org/util-linux \
		util-linux@vger.kernel.org util-linux@archiver.kernel.org
	public-inbox-index util-linux


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.util-linux


AGPL code for this site: git clone https://public-inbox.org/ public-inbox