Util-Linux Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3] blkzone: add open/close/finish commands
@ 2020-03-25 15:09 Damien Le Moal
  2020-03-26 10:35 ` Karel Zak
  0 siblings, 1 reply; 3+ messages in thread
From: Damien Le Moal @ 2020-03-25 15:09 UTC (permalink / raw)
  To: util-linux, Karel Zak, Benno Schulenberg; +Cc: Aravind Ramesh, Hans Holmnerg

From: Aravind Ramesh <Aravind.Ramesh@wdc.com>

Introduce blkzone open, close and finish commands, issuing BLKOPENZONE,
BLKCLOSEZONE and BLKFINISHZONE ioctl commands to open, close or finish
a range of zones of a zoned block device.

Since these three commands are similar to the existing zone reset
command, the existing zone reset command implementation is changed into
the generic blkzone_action() internal handler function for processing
all zone actions.

The BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE ioctl commands codes are
defined in linux/blkzoned.h starting with kernel version 5.5. To ensure
that the blkzone utility compiles even with older blkzoned.h kernel
header versions, these ioctl commands are internally defined if the
blkzoned.h header definition is not present. Execution of these commands
on kernels older than 5.5 will result in a -ENOTTY error (missing
ioctl).

Signed-off-by: Aravind Ramesh <Aravind.Ramesh@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 sys-utils/blkzone.8 | 27 +++++++++++++++++---
 sys-utils/blkzone.c | 61 +++++++++++++++++++++++++++++++++++++++------
 2 files changed, 77 insertions(+), 11 deletions(-)

diff --git a/sys-utils/blkzone.8 b/sys-utils/blkzone.8
index 83d3dd7ce..f50e3f5df 100644
--- a/sys-utils/blkzone.8
+++ b/sys-utils/blkzone.8
@@ -55,10 +55,31 @@ x?:Reserved conditions (should not be reported)
 The command \fBblkzone reset\fP is used to reset one or more zones. Unlike
 .BR sg_reset_wp (8),
 this command operates from the block layer and can reset a range of zones.
+
+.SS open
+The command \fBblkzone open\fP is used to explicitly open one or more zones.
+Unlike
+.BR sg_zone (8),
+open action, this command operates from the block layer and can open a range
+of zones.
+
+.SS close
+The command \fBblkzone close\fP is used to close one or more zones. Unlike
+.BR sg_zone (8),
+close action, this command operates from the block layer and can close a range
+of zones.
+
+.SS finish
+The command \fBblkzone finish\fP is used to finish (transition to full condition)
+one or more zones. Unlike
+.BR sg_zone (8),
+finish action, this command operates from the block layer and can finish a range
+of zones.
+
 .PP
-By default, the command will operate from the zone at device
-sector 0 and reset all zones. Options may be used to modify this behavior
-as well as specify the operation to be performed on the zone, as explained below.
+By default, the reset, open, close and finish commands will operate from the zone
+at device sector 0 and operate on all zones. Options may be used to modify this
+behavior as explained below.
 
 .SH OPTIONS
 The
diff --git a/sys-utils/blkzone.c b/sys-utils/blkzone.c
index 715f03fef..d2670f63e 100644
--- a/sys-utils/blkzone.c
+++ b/sys-utils/blkzone.c
@@ -44,14 +44,29 @@
 #include "sysfs.h"
 #include "optutils.h"
 
+/*
+ * These ioctls are defined in linux/blkzoned.h starting with kernel 5.5.
+ */
+#ifndef BLKOPENZONE
+#define BLKOPENZONE	_IOW(0x12, 134, struct blk_zone_range)
+#endif
+#ifndef BLKCLOSEZONE
+#define BLKCLOSEZONE	_IOW(0x12, 135, struct blk_zone_range)
+#endif
+#ifndef BLKFINISHZONE
+#define BLKFINISHZONE	_IOW(0x12, 136, struct blk_zone_range)
+#endif
+
 struct blkzone_control;
 
 static int blkzone_report(struct blkzone_control *ctl);
-static int blkzone_reset(struct blkzone_control *ctl);
+static int blkzone_action(struct blkzone_control *ctl);
 
 struct blkzone_command {
 	const char *name;
 	int (*handler)(struct blkzone_control *);
+	unsigned long ioctl_cmd;
+	const char *ioctl_name;
 	const char *help;
 };
 
@@ -70,8 +85,36 @@ struct blkzone_control {
 };
 
 static const struct blkzone_command commands[] = {
-	{ "report",	blkzone_report, N_("Report zone information about the given device") },
-	{ "reset",	blkzone_reset,  N_("Reset a range of zones.") }
+	{
+		"report",
+		blkzone_report,
+		0, NULL,
+		N_("Report zone information about the given device")
+	},
+	{
+		"reset",
+		blkzone_action,
+		BLKRESETZONE, "BLKRESETZONE",
+		N_("Reset a range of zones.")
+	},
+	{
+		"open",
+		blkzone_action,
+		BLKOPENZONE, "BLKOPENZONE",
+		N_("Open a range of zones.")
+	},
+	{
+		"close",
+		blkzone_action,
+		BLKCLOSEZONE, "BLKCLOSEZONE",
+		N_("Close a range of zones.")
+	},
+	{
+		"finish",
+		blkzone_action,
+		BLKFINISHZONE, "BLKFINISHZONE",
+		N_("Set a range of zones to Full.")
+	}
 };
 
 static const struct blkzone_command *name_to_command(const char *name)
@@ -246,9 +289,9 @@ static int blkzone_report(struct blkzone_control *ctl)
 }
 
 /*
- * blkzone reset
+ * blkzone reset, open, close, and finish.
  */
-static int blkzone_reset(struct blkzone_control *ctl)
+static int blkzone_action(struct blkzone_control *ctl)
 {
 	struct blk_zone_range za = { .sector = 0 };
 	unsigned long zonesize;
@@ -288,11 +331,13 @@ static int blkzone_reset(struct blkzone_control *ctl)
 	za.sector = ctl->offset;
 	za.nr_sectors = zlen;
 
-	if (ioctl(fd, BLKRESETZONE, &za) == -1)
-		err(EXIT_FAILURE, _("%s: BLKRESETZONE ioctl failed"), ctl->devname);
+	if (ioctl(fd, ctl->command->ioctl_cmd, &za) == -1)
+		err(EXIT_FAILURE, _("%s: %s ioctl failed"),
+		    ctl->devname, ctl->command->ioctl_name);
 	else if (ctl->verbose)
-		printf(_("%s: successfully reset in range from %" PRIu64 ", to %" PRIu64),
+		printf(_("%s: successfull %s of zones in range from %" PRIu64 ", to %" PRIu64),
 			ctl->devname,
+			ctl->command->name,
 			ctl->offset,
 			ctl->offset + zlen);
 	close(fd);
-- 
2.25.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v3] blkzone: add open/close/finish commands
  2020-03-25 15:09 [PATCH v3] blkzone: add open/close/finish commands Damien Le Moal
@ 2020-03-26 10:35 ` Karel Zak
  2020-03-27  3:07   ` Damien Le Moal
  0 siblings, 1 reply; 3+ messages in thread
From: Karel Zak @ 2020-03-26 10:35 UTC (permalink / raw)
  To: Damien Le Moal
  Cc: util-linux, Benno Schulenberg, Aravind Ramesh, Hans Holmnerg

On Thu, Mar 26, 2020 at 12:09:52AM +0900, Damien Le Moal wrote:
>  sys-utils/blkzone.8 | 27 +++++++++++++++++---
>  sys-utils/blkzone.c | 61 +++++++++++++++++++++++++++++++++++++++------
>  2 files changed, 77 insertions(+), 11 deletions(-)

Applied as a diff, thanks.
https://github.com/karelzak/util-linux/commit/46cf662532ef4e924a3478f2e474b619caf141df

    Karel

-- 
 Karel Zak  <kzak@redhat.com>
 http://karelzak.blogspot.com


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v3] blkzone: add open/close/finish commands
  2020-03-26 10:35 ` Karel Zak
@ 2020-03-27  3:07   ` Damien Le Moal
  0 siblings, 0 replies; 3+ messages in thread
From: Damien Le Moal @ 2020-03-27  3:07 UTC (permalink / raw)
  To: Karel Zak; +Cc: util-linux, Benno Schulenberg, Aravind Ramesh, Hans Holmberg

On 2020/03/26 19:35, Karel Zak wrote:
> On Thu, Mar 26, 2020 at 12:09:52AM +0900, Damien Le Moal wrote:
>>  sys-utils/blkzone.8 | 27 +++++++++++++++++---
>>  sys-utils/blkzone.c | 61 +++++++++++++++++++++++++++++++++++++++------
>>  2 files changed, 77 insertions(+), 11 deletions(-)
> 
> Applied as a diff, thanks.
> https://github.com/karelzak/util-linux/commit/46cf662532ef4e924a3478f2e474b619caf141df
> 
>     Karel

Thanks !


-- 
Damien Le Moal
Western Digital Research

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-25 15:09 [PATCH v3] blkzone: add open/close/finish commands Damien Le Moal
2020-03-26 10:35 ` Karel Zak
2020-03-27  3:07   ` Damien Le Moal

Util-Linux Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/util-linux/0 util-linux/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 util-linux util-linux/ https://lore.kernel.org/util-linux \
		util-linux@vger.kernel.org
	public-inbox-index util-linux

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.util-linux


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git