Util-Linux Archive on lore.kernel.org
 help / color / Atom feed
* Errors in util-linux man pages, here: scriptreplay.1: Markup
@ 2020-05-14 18:51 Helge Kreutzmann
  0 siblings, 0 replies; 3+ messages in thread
From: Helge Kreutzmann @ 2020-05-14 18:51 UTC (permalink / raw)
  To: util-linux; +Cc: mario.blaettermann

Dear util-linux maintainers.
the manpage-l10n project maintains a large number of translations of
man pages both from a large variety of sources (including util-linux) as
well for a large variety of target languages.

During their work translators notice different possible issues in the
original (english) man pages. Sometiems this is a straightforward
typo, sometimes a hard to read sentence, sometimes this is a
convention not held up and sometimes we simply do not understand the 
original.

We use several distributions as sources and update regularly (at
least every 2 month). This means we are fairly recent (some
distributions like archlinux also update frequently) but might miss
the latest upstream version once a while, so the error might be
already fixed. We apologize and ask you to close the issue immediately
if this should be the case, but given the huge volume of projects and
the very limited number of volunteers we are not able to double check
each and every issue.

Secondly we translators see the manpages in the neutral po format,
i.e. converted and harmonized, but not the original source (be it man,
groff, xml or other). So we cannot provide a true patch (where
possible), but only an approximation which you need to convert into
your source format.

Finally the issues I'm reporting have accumulated over time and are
not always discovered by me, so sometimes my description of the
problem my be a bit limited - do not hesitate to ask so we can clarify
them.

I'm now reporting the errors for your project. If future reports should 
use another channel, please let me know.

**

Man page: scriptreplay.1
Issue: scriptreplay → B<scriptreplay>

"Specifies how to use CR (0x0D, carriage return) character from log files.  "
"The default mode is I<auto>, in this case CR is replaced with line break for "
"stdin log, because otherwise scriptreplay will overwrite the same line.  The "
"another modes are I<never> and I<always>."

Greetings

           Helge

-- 
      Dr. Helge Kreutzmann                     debian@helgefjell.de
           Dipl.-Phys.                   http://www.helgefjell.de/debian.php
        64bit GNU powered                     gpg signed mail preferred
           Help keep free software "libre": http://www.ffii.de/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Errors in util-linux man pages, here: scriptreplay.1: Markup
@ 2020-05-14 18:51 Helge Kreutzmann
  0 siblings, 0 replies; 3+ messages in thread
From: Helge Kreutzmann @ 2020-05-14 18:51 UTC (permalink / raw)
  To: util-linux; +Cc: mario.blaettermann

Dear util-linux maintainers.
the manpage-l10n project maintains a large number of translations of
man pages both from a large variety of sources (including util-linux) as
well for a large variety of target languages.

During their work translators notice different possible issues in the
original (english) man pages. Sometiems this is a straightforward
typo, sometimes a hard to read sentence, sometimes this is a
convention not held up and sometimes we simply do not understand the 
original.

We use several distributions as sources and update regularly (at
least every 2 month). This means we are fairly recent (some
distributions like archlinux also update frequently) but might miss
the latest upstream version once a while, so the error might be
already fixed. We apologize and ask you to close the issue immediately
if this should be the case, but given the huge volume of projects and
the very limited number of volunteers we are not able to double check
each and every issue.

Secondly we translators see the manpages in the neutral po format,
i.e. converted and harmonized, but not the original source (be it man,
groff, xml or other). So we cannot provide a true patch (where
possible), but only an approximation which you need to convert into
your source format.

Finally the issues I'm reporting have accumulated over time and are
not always discovered by me, so sometimes my description of the
problem my be a bit limited - do not hesitate to ask so we can clarify
them.

I'm now reporting the errors for your project. If future reports should 
use another channel, please let me know.

**

Man page: scriptreplay.1
Issue 1: scriptreplay → B<scriptreplay>
Issue 2: --log-io → B<--log-io>

"Forces scriptreplay to print only specified stream.  The supported stream "
"types are I<in>, I<out>, I<signal>, or I<info>.  This option is recommended "
"for multi-stream logs (e.g., --log-io)  to print only specified data."

Greetings

           Helge

-- 
      Dr. Helge Kreutzmann                     debian@helgefjell.de
           Dipl.-Phys.                   http://www.helgefjell.de/debian.php
        64bit GNU powered                     gpg signed mail preferred
           Help keep free software "libre": http://www.ffii.de/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Errors in util-linux man pages, here: scriptreplay.1: Markup
@ 2020-05-14 18:51 Helge Kreutzmann
  0 siblings, 0 replies; 3+ messages in thread
From: Helge Kreutzmann @ 2020-05-14 18:51 UTC (permalink / raw)
  To: util-linux; +Cc: mario.blaettermann

Dear util-linux maintainers.
the manpage-l10n project maintains a large number of translations of
man pages both from a large variety of sources (including util-linux) as
well for a large variety of target languages.

During their work translators notice different possible issues in the
original (english) man pages. Sometiems this is a straightforward
typo, sometimes a hard to read sentence, sometimes this is a
convention not held up and sometimes we simply do not understand the 
original.

We use several distributions as sources and update regularly (at
least every 2 month). This means we are fairly recent (some
distributions like archlinux also update frequently) but might miss
the latest upstream version once a while, so the error might be
already fixed. We apologize and ask you to close the issue immediately
if this should be the case, but given the huge volume of projects and
the very limited number of volunteers we are not able to double check
each and every issue.

Secondly we translators see the manpages in the neutral po format,
i.e. converted and harmonized, but not the original source (be it man,
groff, xml or other). So we cannot provide a true patch (where
possible), but only an approximation which you need to convert into
your source format.

Finally the issues I'm reporting have accumulated over time and are
not always discovered by me, so sometimes my description of the
problem my be a bit limited - do not hesitate to ask so we can clarify
them.

I'm now reporting the errors for your project. If future reports should 
use another channel, please let me know.

**

Man page: scriptreplay.1
Issue: B<script>(1)) → B<script>(1)

"Display details about session recorded in the specified timing file and "
"exit.  The session has to be recorded by I<advanced> format (see "
"B<script>(1))  option B<--logging-format> for more details)."

Greetings

           Helge

-- 
      Dr. Helge Kreutzmann                     debian@helgefjell.de
           Dipl.-Phys.                   http://www.helgefjell.de/debian.php
        64bit GNU powered                     gpg signed mail preferred
           Help keep free software "libre": http://www.ffii.de/

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-14 18:51 Errors in util-linux man pages, here: scriptreplay.1: Markup Helge Kreutzmann
2020-05-14 18:51 Helge Kreutzmann
2020-05-14 18:51 Helge Kreutzmann

Util-Linux Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/util-linux/0 util-linux/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 util-linux util-linux/ https://lore.kernel.org/util-linux \
		util-linux@vger.kernel.org
	public-inbox-index util-linux

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.util-linux


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git