util-linux.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Naohiro Aota <Naohiro.Aota@wdc.com>
To: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: Karel Zak <kzak@redhat.com>,
	"util-linux@vger.kernel.org" <util-linux@vger.kernel.org>
Subject: Re: [PATCH v2 2/3] lsblk: add columns of zoned parameters
Date: Mon, 30 Aug 2021 01:08:06 +0000	[thread overview]
Message-ID: <20210830010806.w2v2zmm6i5smcoou@naota-xeon> (raw)
In-Reply-To: <DM6PR04MB7081F921F5DF2E1D8E35D350E7CA9@DM6PR04MB7081.namprd04.prod.outlook.com>

On Sun, Aug 29, 2021 at 11:10:18PM +0000, Damien Le Moal wrote:
> On 2021/08/27 16:35, Naohiro Aota wrote:
> > Several parameters for zoned devices are missing from lsblk's columns. This
> > commit introduces them as following.
> > 
> >  ZONE-SZ    zone size
> >  ZONE-GRAN  zone write granularity
> 
> ZONE-WGRAN ? (to enforce the point that is a WRITE granularity).

I changed WGRAN to GRAN to follow DISC-GRAN (discard granularity) and
to have a shorter name. But, either is fine for me.

> 
> >  ZONE-APP   zone append max bytes
> >  ZONE-NR    number of zones
> >  ZONE-OMAX  max open zones
> >  ZONE-AMAX  max active zones
> > 
> > Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
> > ---
> >  bash-completion/lsblk |  3 ++-
> >  misc-utils/lsblk.c    | 52 +++++++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 54 insertions(+), 1 deletion(-)
> > 
> > diff --git a/bash-completion/lsblk b/bash-completion/lsblk
> > index 731ef3f4095d..c9ebbdcedef6 100644
> > --- a/bash-completion/lsblk
> > +++ b/bash-completion/lsblk
> > @@ -10,7 +10,8 @@ _lsblk_module()
> >  		LABEL UUID PTUUID PTTYPE PARTTYPE PARTTYPENAME PARTLABEL PARTUUID PARTFLAGS RA
> >  		RO RM HOTPLUG MODEL SERIAL SIZE STATE OWNER GROUP MODE ALIGNMENT MIN-IO OPT-IO
> >  		PHY-SEC LOG-SEC ROTA SCHED RQ-SIZE TYPE DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO
> > -		WSAME WWN RAND PKNAME HCTL TRAN SUBSYSTEMS REV VENDOR ZONED DAX
> > +		WSAME WWN RAND PKNAME HCTL TRAN SUBSYSTEMS REV VENDOR ZONED ZONE-SZ ZONE-GRAN
> > +		ZONE-APP ZONE-NR ZONE-OMAX ZONE-AMAX DAX
> >  	"
> >  
> >  	case $prev in
> > diff --git a/misc-utils/lsblk.c b/misc-utils/lsblk.c
> > index 775a6d832076..108c8187498e 100644
> > --- a/misc-utils/lsblk.c
> > +++ b/misc-utils/lsblk.c
> > @@ -123,6 +123,12 @@ enum {
> >  	COL_WSAME,
> >  	COL_WWN,
> >  	COL_ZONED,
> > +	COL_ZONESIZE,
> > +	COL_ZONEWRITEGRAN,
> > +	COL_ZONEAPPEND,
> 
> COL_ZONESZ
> COL_ZONEWGRAN
> COL_ZONEAPP
> 
> To be inline with the columns display names ?

Sure. I'll fix.

> > +	COL_ZONE_NR,
> > +	COL_ZONE_OMAX,
> > +	COL_ZONE_AMAX,
> >  };
> >  /* basic table settings */
> > @@ -213,6 +219,12 @@ static struct colinfo infos[] = {
> >  	[COL_WSAME] = { "WSAME", 6, SCOLS_FL_RIGHT, N_("write same max bytes"), COLTYPE_SIZE },
> >  	[COL_WWN] = { "WWN", 18, 0, N_("unique storage identifier") },
> >  	[COL_ZONED] = { "ZONED", 0.3, 0, N_("zone model") },
> > +	[COL_ZONESIZE] = { "ZONE-SZ", 9, SCOLS_FL_RIGHT, N_("zone size"), COLTYPE_NUM },
> > +	[COL_ZONEWRITEGRAN] = { "ZONE-GRAN", 10, SCOLS_FL_RIGHT, N_("zone write granularity"), COLTYPE_NUM },
> > +	[COL_ZONEAPPEND] = { "ZONE-APP", 11, SCOLS_FL_RIGHT, N_("zone append max bytes"), COLTYPE_NUM },
> > +	[COL_ZONE_NR] = { "ZONE-NR", 8, SCOLS_FL_RIGHT, N_("number of zones"), COLTYPE_NUM },
> > +	[COL_ZONE_OMAX] = { "ZONE-OMAX", 10, SCOLS_FL_RIGHT, N_("max open zones"), COLTYPE_NUM },
> > +	[COL_ZONE_AMAX] = { "ZONE-AMAX", 10, SCOLS_FL_RIGHT, N_("max active zones"), COLTYPE_NUM },
> >  };
> >  
> >  struct lsblk *lsblk;	/* global handler */
> > @@ -1067,6 +1079,46 @@ static char *device_get_data(
> >  	case COL_ZONED:
> >  		ul_path_read_string(dev->sysfs, &str, "queue/zoned");
> >  		break;
> > +	case COL_ZONESIZE:
> > +	{
> > +		uint64_t x;
> > +
> > +		if (ul_path_read_u64(dev->sysfs, &x, "queue/chunk_sectors") == 0) {
> > +			x <<= 9;
> > +			if (lsblk->bytes)
> > +				xasprintf(&str, "%ju", x);
> > +			else
> > +				str = size_to_human_string(SIZE_SUFFIX_1LETTER, x);
> > +			if (sortdata)
> > +				*sortdata = x;
> > +		}
> > +		break;
> > +	}
> > +	case COL_ZONEWRITEGRAN:
> > +		device_read_bytes(dev, "queue/zone_write_granularity", &str, sortdata);
> > +		break;
> > +	case COL_ZONEAPPEND:
> > +		device_read_bytes(dev, "queue/zone_append_max_bytes", &str, sortdata);
> > +		break;
> > +	case COL_ZONE_NR:
> > +		ul_path_read_string(dev->sysfs, &str, "queue/nr_zones");
> > +		if (sortdata)
> > +			str2u64(str, sortdata);
> > +		break;
> > +	case COL_ZONE_OMAX:
> > +		ul_path_read_string(dev->sysfs, &str, "queue/max_open_zones");
> > +		if (!str)
> > +			str = xstrdup("0");
> > +		if (sortdata)
> > +			str2u64(str, sortdata);
> > +		break;
> > +	case COL_ZONE_AMAX:
> > +		ul_path_read_string(dev->sysfs, &str, "queue/max_active_zones");
> > +		if (!str)
> > +			str = xstrdup("0");
> > +		if (sortdata)
> > +			str2u64(str, sortdata);
> > +		break;
> >  	case COL_DAX:
> >  		ul_path_read_string(dev->sysfs, &str, "queue/dax");
> >  		break;
> > 
> 
> 
> -- 
> Damien Le Moal
> Western Digital Research
> 

  reply	other threads:[~2021-08-30  1:08 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-27  7:34 [PATCH v2 0/3] add columns for zoned parameters Naohiro Aota
2021-08-27  7:34 ` [PATCH v2 1/3] lsblk: factor out function to read sysfs param as bytes Naohiro Aota
2021-08-29 23:07   ` Damien Le Moal
2021-08-30  1:21     ` Naohiro Aota
2021-08-27  7:34 ` [PATCH v2 2/3] lsblk: add columns of zoned parameters Naohiro Aota
2021-08-29 23:10   ` Damien Le Moal
2021-08-30  1:08     ` Naohiro Aota [this message]
2021-08-30  1:50       ` Damien Le Moal
2021-08-30  5:15         ` Naohiro Aota
2021-08-29 23:15   ` Damien Le Moal
2021-08-27  7:34 ` [PATCH v2 3/3] lsblk: add zoned columns to "lsblk -z" Naohiro Aota
2021-08-29 23:14   ` Damien Le Moal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210830010806.w2v2zmm6i5smcoou@naota-xeon \
    --to=naohiro.aota@wdc.com \
    --cc=Damien.LeMoal@wdc.com \
    --cc=kzak@redhat.com \
    --cc=util-linux@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).