WireGuard Archive on lore.kernel.org
 help / color / Atom feed
From: Roman Mamedov <rm@romanrm.net>
To: Ole-Morten Duesund <olemd@glemt.net>
Cc: wireguard@lists.zx2c4.com
Subject: Re: Wireguard behind NAT
Date: Mon, 3 Sep 2018 15:55:49 +0500
Message-ID: <20180903155549.0677bf87@natsu> (raw)
In-Reply-To: <429987c9-26e4-edb7-4d31-c8e611615670@glemt.net>

On Mon, 3 Sep 2018 12:43:19 +0200
Ole-Morten Duesund <olemd@glemt.net> wrote:

> Adding a "PersistentKeepalive = 5" to your config on SIDE_A_SERVER 
> should keep the connection up.

Do you encounter any difference between 5, 25 and 55, only 5 works for you? If
not, setting it to such a low interval seems wasteful, especially on
LTE/mobile with possibly metered bandwidth and battery concerns.

With respect,

  reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-03 10:28 Adrián Mihálko
2018-09-03 10:43 ` Ole-Morten Duesund
2018-09-03 10:55   ` Roman Mamedov [this message]
2018-09-03 10:59     ` Ole-Morten Duesund
  -- strict thread matches above, loose matches on Subject: below --
2018-09-02 19:51 Adrián Mihálko
2018-09-07  3:39 ` Jason A. Donenfeld
2018-09-07 15:17 ` Steven Honson
2018-03-12 11:22 Adrián Mihálko
2018-04-14  2:06 ` Jason A. Donenfeld

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180903155549.0677bf87@natsu \
    --to=rm@romanrm.net \
    --cc=olemd@glemt.net \
    --cc=wireguard@lists.zx2c4.com \


* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

WireGuard Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/wireguard/0 wireguard/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 wireguard wireguard/ https://lore.kernel.org/wireguard \
		wireguard@lists.zx2c4.com zx2c4-wireguard@archiver.kernel.org
	public-inbox-index wireguard

Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/ public-inbox