WireGuard Archive on lore.kernel.org
 help / color / Atom feed
From: "Ivan Labáth" <labawi-wg@matrix-dream.net>
To: Nico Schottelius <nico.schottelius@ungleich.ch>
Cc: WireGuard mailing list <wireguard@lists.zx2c4.com>
Subject: Re: Netfilter redirect does not work with wireguard
Date: Thu, 7 Nov 2019 21:50:54 +0000
Message-ID: <20191107215054.GA23531@matrix-dream.net> (raw)
In-Reply-To: <87pni3ljzh.fsf@ungleich.ch>

Hello,

have you checked the source port of replies, or whether
there are any replies?

# tcpdump -nn

Tcpdump should show pre-NAT addresses on incoming packets
and AFAIK post-NAT on outgoing packets, i.e. what goes on
the wire.

You might need to apply SNAT on outgoing packets, which
might happen automatically with TCP connection tracking,
but I wouldn't really expect it on connection-less UDP.

Regards,
Ivan

On Thu, Nov 07, 2019 at 05:38:42PM +0100, Nico Schottelius wrote:
> 
> Hello,
> 
> I am experimenting with nft / netfilter redirects to support wireguard
> packets on *any* udp port. I tried using the following configuration for
> nftables:
> 
> [17:34:14] vpn-2a0ae5c1:~# cat /etc/nftables.conf
> #!/usr/sbin/nft -f
> 
> flush ruleset
> 
> table ip nat {
> 	chain prerouting {
> 		type nat hook prerouting priority 0;
> 
> 		# SSH works
> 		tcp dport != 22 redirect to 22
> 
> 		# wireguard doesn't
> 		udp dport != 51820 redirect to 51820
> 	}
> 
> 	chain postrouting {
> 		type nat hook postrouting priority 0;
> 	}
> }
> 
> However as you can see in the comments, this does not work with
> wireguard, however it does work with SSH.
> 
> I can see that wireguard is kernel space, and ssh user space, but does
> that cause the netfilter part to be skipped or am I doing some silly
> mistake here?
> 
> Best regards,
> 
> Nico
> 
> 
> --
> Modern, affordable, Swiss Virtual Machines. Visit www.datacenterlight.ch
> _______________________________________________
> WireGuard mailing list
> WireGuard@lists.zx2c4.com
> https://lists.zx2c4.com/mailman/listinfo/wireguard
_______________________________________________
WireGuard mailing list
WireGuard@lists.zx2c4.com
https://lists.zx2c4.com/mailman/listinfo/wireguard

  reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-07 16:38 Nico Schottelius
2019-11-07 21:50 ` Ivan Labáth [this message]
2019-11-08 15:29   ` Nico Schottelius

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191107215054.GA23531@matrix-dream.net \
    --to=labawi-wg@matrix-dream.net \
    --cc=nico.schottelius@ungleich.ch \
    --cc=wireguard@lists.zx2c4.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

WireGuard Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/wireguard/0 wireguard/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 wireguard wireguard/ https://lore.kernel.org/wireguard \
		wireguard@lists.zx2c4.com
	public-inbox-index wireguard

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/com.zx2c4.lists.wireguard


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git