* IS-IS routing protocol
@ 2019-08-12 16:53 Lucian Cristian
2019-08-12 19:01 ` Rouven Czerwinski
0 siblings, 1 reply; 3+ messages in thread
From: Lucian Cristian @ 2019-08-12 16:53 UTC (permalink / raw)
To: wireguard
Has anyone managed to configure IS-IS routing with wireguard interfaces ?
I've added multicast address to AllowedIPs (AllowedIPs=224.0.0.0/24) but
when I activate ip router isis on the wireguard interface, tcpdump only
shows: unknown ip 8
expecting to see something like L1 Lan IIH, hlen: 27, v: 1, pdu-v: 1,
sys-id-len: 6 (0), max-area: 3 (0)
or
L2 Lan IIH, hlen: 27, v: 1, pdu-v: 1, sys-id-len: 6 (0), max-area: 3 (0)
OSPF, RIP, EIGRP are working fine
Thanks!
_______________________________________________
WireGuard mailing list
WireGuard@lists.zx2c4.com
https://lists.zx2c4.com/mailman/listinfo/wireguard
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: IS-IS routing protocol
2019-08-12 16:53 IS-IS routing protocol Lucian Cristian
@ 2019-08-12 19:01 ` Rouven Czerwinski
2019-08-12 19:40 ` Lucian Cristian
0 siblings, 1 reply; 3+ messages in thread
From: Rouven Czerwinski @ 2019-08-12 19:01 UTC (permalink / raw)
To: wireguard
Hi,
Lucian Cristian <luci@powerneth.ro> writes:
> Has anyone managed to configure IS-IS routing with wireguard interfaces ?
>
> I've added multicast address to AllowedIPs (AllowedIPs=224.0.0.0/24) but
> when I activate ip router isis on the wireguard interface, tcpdump only
> shows: unknown ip 8
>
> expecting to see something like L1 Lan IIH, hlen: 27, v: 1, pdu-v: 1,
> sys-id-len: 6 (0), max-area: 3 (0)
>
> or
>
> L2 Lan IIH, hlen: 27, v: 1, pdu-v: 1, sys-id-len: 6 (0), max-area: 3 (0)
IS-IS uses layer 2 while wireguard only provides layer 3 connectivity.
IS-IS will not work over wireguard.
Regards,
Emantor
_______________________________________________
WireGuard mailing list
WireGuard@lists.zx2c4.com
https://lists.zx2c4.com/mailman/listinfo/wireguard
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: IS-IS routing protocol
2019-08-12 19:01 ` Rouven Czerwinski
@ 2019-08-12 19:40 ` Lucian Cristian
0 siblings, 0 replies; 3+ messages in thread
From: Lucian Cristian @ 2019-08-12 19:40 UTC (permalink / raw)
To: wireguard
On 12.08.2019 22:01, Rouven Czerwinski wrote:
> Hi,
>
> Lucian Cristian <luci@powerneth.ro> writes:
>
>> Has anyone managed to configure IS-IS routing with wireguard interfaces ?
>>
>> I've added multicast address to AllowedIPs (AllowedIPs=224.0.0.0/24) but
>> when I activate ip router isis on the wireguard interface, tcpdump only
>> shows: unknown ip 8
>>
>> expecting to see something like L1 Lan IIH, hlen: 27, v: 1, pdu-v: 1,
>> sys-id-len: 6 (0), max-area: 3 (0)
>>
>> or
>>
>> L2 Lan IIH, hlen: 27, v: 1, pdu-v: 1, sys-id-len: 6 (0), max-area: 3 (0)
> IS-IS uses layer 2 while wireguard only provides layer 3 connectivity.
> IS-IS will not work over wireguard.
>
> Regards,
> Emantor
> _______________________________________________
> WireGuard mailing list
> WireGuard@lists.zx2c4.com
> https://lists.zx2c4.com/mailman/listinfo/wireguard
Is what I feared, thank you !
Lucian
_______________________________________________
WireGuard mailing list
WireGuard@lists.zx2c4.com
https://lists.zx2c4.com/mailman/listinfo/wireguard
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-08-12 19:40 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-12 16:53 IS-IS routing protocol Lucian Cristian
2019-08-12 19:01 ` Rouven Czerwinski
2019-08-12 19:40 ` Lucian Cristian
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).