On 03.12.18 14:14, Toke Høiland-Jørgensen wrote:
> I'm not sure I quite understand what it is you are trying to achieve;
> why can't just you reconfigure the wireguard interface to route the IP
> to the right peer?

Because that (a) requires a new mechanism and (b) requires locking,
because currently you can't atomically remove/add an address from/to a peer.

For a "normal" interface I'd change the host route to whatever the
nexthop to the real destination address is, and I'm *done*. That's one
atomic "ip route replace" command (or its netlink equivalent). I've
found a couple of HA management programs which can do that.

For a wireguard interface I need to find the correct peer (by matching
the real destination against all Allowed-IP entries), lock the peer
against changes, read the Allowed-IP list, add the multihomed address,
and write the list back. Before/after I do all of this I have to remove
the multihomed address from whatever peer it was previously set to, so
there's an indeterminate time during which the destination is either
unreachable or random. The aforementioned HA managers have no idea what
wireguard is, and their authors may or may not be interested in
special-casing a still-somewhat-obscure network interface type.

-- 
-- Matthias Urlichs