WireGuard Archive on lore.kernel.org
 help / color / Atom feed
* Wireguard not working on iOS 13 Beta
@ 2019-08-06 15:16 David Lane
  0 siblings, 0 replies; only message in thread
From: David Lane @ 2019-08-06 15:16 UTC (permalink / raw)
  To: wireguard

Hi everyone,

Wireguard hasn't worked since I installed the iOS 13 beta on my iPad (2017 Pro, 12.9").

Here's the log from connecting and disconnecting from my iPad:
> 2019-08-06 17:54:15.049477: [NET] App version: 0.0.20190609 (11); Go backend version: 0.0.20190517
> 2019-08-06 17:54:15.302984: [NET] Starting tunnel from the OS directly, rather than the app
> 2019-08-06 17:54:15.446345: [NET] Tunnel interface is utun2
> 2019-08-06 17:54:15.448677: [NET] DNS64: mapped XXX.XX.XXX.226 to itself.
> 2019-08-06 17:54:15.449795: [NET] Attaching to interface
> 2019-08-06 17:54:15.451205: [NET] Routine: encryption worker - started
> 2019-08-06 17:54:15.451266: [NET] Routine: encryption worker - started
> 2019-08-06 17:54:15.452843: [NET] Routine: decryption worker - started
> 2019-08-06 17:54:15.454801: [NET] Routine: handshake worker - started
> 2019-08-06 17:54:15.457725: [NET] Routine: handshake worker - started
> 2019-08-06 17:54:15.462804: [NET] Routine: decryption worker - started
> 2019-08-06 17:54:15.464045: [NET] Routine: TUN reader - started
> 2019-08-06 17:54:15.467474: [NET] Routine: event worker - started
> 2019-08-06 17:54:15.482796: [NET] UAPI: Updating private key
> 2019-08-06 17:54:15.483184: [NET] UAPI: Removing all peers
> 2019-08-06 17:54:15.483958: [NET] UAPI: Transition to peer configuration
> 2019-08-06 17:54:15.486004: [NET] peer(AAAA…AAAA) - UAPI: Updating endpoint
> 2019-08-06 17:54:15.489483: [NET] peer(AAAA…AAAA) - UAPI: Updating persistent keepalive interval
> 2019-08-06 17:54:15.489962: [NET] peer(AAAA…AAAA) - UAPI: Removing all allowedips
> 2019-08-06 17:54:15.490576: [NET] peer(AAAA…AAAA) - UAPI: Adding allowedip
> 2019-08-06 17:54:15.491876: [NET] peer(AAAA…AAAA) - UAPI: Adding allowedip
> 2019-08-06 17:54:15.494557: [NET] Routine: receive incoming IPv4 - started
> 2019-08-06 17:54:15.496397: [NET] Routine: receive incoming IPv6 - started
> 2019-08-06 17:54:15.498000: [NET] UDP bind has been updated
> 2019-08-06 17:54:15.499974: [NET] Device started
> 2019-08-06 17:54:16.336298: [NET] Network change detected with satisfied route and interface order [en0, utun2]
> 2019-08-06 17:54:16.337103: [NET] DNS64: mapped XXX.XX.XXX.226 to itself.
> 2019-08-06 17:54:16.338292: [NET] UAPI: Transition to peer configuration
> 2019-08-06 17:54:16.340842: [NET] peer(AAAA…AAAA) - UAPI: Updating endpoint
> 2019-08-06 17:54:16.341986: [NET] Routine: receive incoming IPv4 - stopped
> 2019-08-06 17:54:16.343980: [NET] Routine: receive incoming IPv6 - stopped
> 2019-08-06 17:54:16.346084: [NET] Routine: receive incoming IPv4 - started
> 2019-08-06 17:54:16.347850: [NET] Routine: receive incoming IPv6 - started
> 2019-08-06 17:54:16.353403: [NET] UDP bind has been updated
> 2019-08-06 17:54:34.766801: [NET] Network change detected with satisfied route and interface order [en0]
> 2019-08-06 17:54:34.767356: [NET] DNS64: mapped XXX.XX.XXX.226 to itself.
> 2019-08-06 17:54:34.768554: [NET] UAPI: Transition to peer configuration
> 2019-08-06 17:54:34.770471: [NET] peer(AAAA…AAAA) - UAPI: Updating endpoint
> 2019-08-06 17:54:34.772981: [NET] Routine: receive incoming IPv4 - stopped
> 2019-08-06 17:54:34.774542: [NET] Routine: receive incoming IPv6 - stopped
> 2019-08-06 17:54:34.778504: [NET] Routine: receive incoming IPv4 - started
> 2019-08-06 17:54:34.778712: [NET] Routine: receive incoming IPv6 - started
> 2019-08-06 17:54:34.780584: [NET] UDP bind has been updated
> 2019-08-06 17:54:35.076369: [NET] Stopping tunnel
> 2019-08-06 17:54:35.076479: [NET] Device closing
> 2019-08-06 17:54:35.079087: [NET] Routine: TUN reader - stopped


I ran tcpdump on my Ubuntu VPS, but it didn't see any packets.
On my Android phone, everything works fine.

For what it's worth, I've got both IPv4 & IPv6 setup in my configs:
> [Peer]
> PublicKey = [redacted]
> AllowedIPs = 10.0.0.2/32, fddc:86e7:d33:9765::2/128
> Endpoint = XX.XXX.XXX.XX:15685

Thanks in advance for any help!

Best,

David
_______________________________________________
WireGuard mailing list
WireGuard@lists.zx2c4.com
https://lists.zx2c4.com/mailman/listinfo/wireguard

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-06 15:16 Wireguard not working on iOS 13 Beta David Lane

WireGuard Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/wireguard/0 wireguard/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 wireguard wireguard/ https://lore.kernel.org/wireguard \
		wireguard@lists.zx2c4.com zx2c4-wireguard@archiver.kernel.org
	public-inbox-index wireguard


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/com.zx2c4.lists.wireguard


AGPL code for this site: git clone https://public-inbox.org/ public-inbox