* android feature request: integration with data usage settings
@ 2018-07-31 20:50 Jaron Kent-Dobias
0 siblings, 0 replies; only message in thread
From: Jaron Kent-Dobias @ 2018-07-31 20:50 UTC (permalink / raw)
To: WireGuard mailing list
I've been using the wireguard kernel module on my android 8.1 device for
a while, and it's been a dream. However, I noticed recently that
settings in Apps -> [App Here] -> Data Usage, like disabling an apps'
ability to use cellular data, become moot while the tunnel is on because
all the data is associated with wireguard in the eyes of that interface.
It would be nice if wireguard somehow respected these settings!
I've never done android development so I don't know where to start, but
would take a crack at it myself with some direction.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, back to index
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-31 20:50 android feature request: integration with data usage settings Jaron Kent-Dobias
WireGuard Archive on lore.kernel.org
Archives are clonable:
git clone --mirror https://lore.kernel.org/wireguard/0 wireguard/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 wireguard wireguard/ https://lore.kernel.org/wireguard \
Newsgroup available over NNTP:
AGPL code for this site: git clone https://public-inbox.org/ public-inbox