WireGuard Archive on lore.kernel.org
 help / color / Atom feed
* Usage Add/Remove Allowed-ip
@ 2019-07-25 14:21 nicolas prochazka
  0 siblings, 0 replies; only message in thread
From: nicolas prochazka @ 2019-07-25 14:21 UTC (permalink / raw)
  To: WireGuard mailing list

Hello,
Is it possible to add/remove Allowed-ip in peer description without
modify configuration file or using wg set command,
I think about wg peer add|remove allowed-ip

Regards,
Nicolas Prochazka
_______________________________________________
WireGuard mailing list
WireGuard@lists.zx2c4.com
https://lists.zx2c4.com/mailman/listinfo/wireguard

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-25 14:21 Usage Add/Remove Allowed-ip nicolas prochazka

WireGuard Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/wireguard/0 wireguard/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 wireguard wireguard/ https://lore.kernel.org/wireguard \
		wireguard@lists.zx2c4.com zx2c4-wireguard@archiver.kernel.org
	public-inbox-index wireguard


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/com.zx2c4.lists.wireguard


AGPL code for this site: git clone https://public-inbox.org/ public-inbox