WireGuard Archive on lore.kernel.org
 help / color / Atom feed
From: Simone Rossetto <simros85@gmail.com>
To: James <james.b.price@gmail.com>
Cc: wireguard@lists.zx2c4.com
Subject: Re: Strange firewall dnat rule to make WireGuard work on dual-interface
Date: Fri, 4 Oct 2019 14:52:25 +0200
Message-ID: <CAEBQdhi6DrBPxT6RC6evvw8982GKcX9oKQO=2mN0OEoFp3GaeA@mail.gmail.com> (raw)
In-Reply-To: <CA+kUo267JEndBxav--GABQ3o02ZXMOVmktB1ZW2R6Tzx-X0v-Q@mail.gmail.com>

Hi James

Il giorno mer 25 set 2019 alle ore 10:51 James
<james.b.price@gmail.com> ha scritto:
> By design or lack of features, it ignores what the interface and IP the incoming packet was received on.

Yes, it seams that.

> I'm trying to do something similar to you but even with your IPtables I can't get mine to work. I have a more complicated setup and I can't seem to get the outbound packets to follow a routing table using a mark.

Maybe I can help you... tell me which is your configuration and what
you need to accomplish.

WireGuard mailing list

      reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-24 20:53 James
2019-10-04 12:52 ` Simone Rossetto [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAEBQdhi6DrBPxT6RC6evvw8982GKcX9oKQO=2mN0OEoFp3GaeA@mail.gmail.com' \
    --to=simros85@gmail.com \
    --cc=james.b.price@gmail.com \
    --cc=wireguard@lists.zx2c4.com \


* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

WireGuard Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/wireguard/0 wireguard/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 wireguard wireguard/ https://lore.kernel.org/wireguard \
		wireguard@lists.zx2c4.com zx2c4-wireguard@archiver.kernel.org
	public-inbox-index wireguard

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/ public-inbox