WireGuard Archive on lore.kernel.org
 help / color / Atom feed
* Should wg-quick with SaveConfig accumulate IPv6 link-local addresses
@ 2018-07-10 22:20 Eddie
  2018-07-14 18:02 ` jugs
  0 siblings, 1 reply; 8+ messages in thread
From: Eddie @ 2018-07-10 22:20 UTC (permalink / raw)
  To: WireGuard mailing list

Not sure if this is intended behaviour, or not.

Every time I start an interface using wg-quick with the SaveConfig = 
true it reloads all the previous, saved, IPv6 link-local addresses plus 
generates a new one.  So the first time the interface is started there 
is 1 link-local address.  The next time, 2.  Then 3. Then 4, etc. etc.

Cheers.

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-10 22:20 Should wg-quick with SaveConfig accumulate IPv6 link-local addresses Eddie
2018-07-14 18:02 ` jugs
2018-07-19  0:31   ` Eddie
2018-12-08 13:32     ` Xand
2018-12-10  1:15       ` Jason A. Donenfeld
2018-12-10  2:04         ` Samuel Holland
2018-12-10  2:05           ` Jason A. Donenfeld
2018-12-10  2:13             ` Samuel Holland

WireGuard Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/wireguard/0 wireguard/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 wireguard wireguard/ https://lore.kernel.org/wireguard \
		wireguard@lists.zx2c4.com zx2c4-wireguard@archiver.kernel.org
	public-inbox-index wireguard


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/com.zx2c4.lists.wireguard


AGPL code for this site: git clone https://public-inbox.org/ public-inbox