So, I tried to configure these two interfaces: interface: wg1 public key: my_public_key1 private key: (hidden) listening port: 51820 peer: public_key_server1 endpoint: ip_server1:51820 allowed ips: 0.0.0.0/0 and interface: wg2 public key: my_public_key2 private key: (hidden) listening port: 51821 peer: public_key_server2 endpoint: ip_server2:51821 allowed ips: 0.0.0.0/0 but only one Wireguard interfaces is online (handshake on both). Where is my mistake? Thanks Sent with [ProtonMail](https://protonmail.com) Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Sunday, February 17, 2019 9:36 AM, Lucian Cristian wrote: > On 09.02.2019 11:20, Alexago wrote: > >> Hi, >> >> actually I use on my router (OpenWRT) two OpenVPN connections and one Wireguard connection (all VPN connections are client) over my WAN connection (1Gbps/500Mbps) with 2 different VPN providers (Mullvad and IVPN): for policy routing and load balancing, with these connections, I use MWAN3 package. >> >> MWAN3 is useful to choose >> >> - VPN connection based on source or destination address, port, for example >> - load balancing two or more VPN connections, based on source, destination and port, for example >> >> Now I would like to switch my two OpenVPN connections to Wireguard, so I would like to have three simultaneous Wireguard connections (obviously with 3 different Wireguard servers). >> >> My problem is how to use simultaneous Wireguard connections (with allowed ips =0.0.0.0/0) and to leave to external package (like MWAN3) to choose routing policy and also load balancing. >> >> I tried to configure two Wireguard connections but only one of these goes online, the other one is always offline: I think problem is multiple "0.0.0.0/0" allowed IPs. >> >> Can you help me? >> >> Thanks >> >> _______________________________________________ >> WireGuard mailing list >> WireGuard@lists.zx2c4.com >> >> https://lists.zx2c4.com/mailman/listinfo/wireguard > > use another "server" port for the second vpn > > Regards