From: Jan Beulich <jbeulich@suse.com>
To: "Jürgen Groß" <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
George Dunlap <george.dunlap@citrix.com>,
Ian Jackson <iwj@xenproject.org>, Julien Grall <julien@xen.org>,
Stefano Stabellini <sstabellini@kernel.org>, Wei Liu <wl@xen.org>,
Dario Faggioli <dfaggioli@suse.com>,
xen-devel@lists.xenproject.org
Subject: Re: [PATCH v2 15/17] xen/cpupool: add cpupool directories
Date: Thu, 3 Dec 2020 15:46:34 +0100 [thread overview]
Message-ID: <0613c7e2-724a-e16c-91f7-f99298d04ab2@suse.com> (raw)
In-Reply-To: <89f52bed-c611-70c5-1349-63838530debd@suse.com>
On 02.12.2020 16:46, Jürgen Groß wrote:
> On 01.12.20 09:21, Juergen Gross wrote:
>> @@ -1003,12 +1006,131 @@ static struct notifier_block cpu_nfb = {
>> .notifier_call = cpu_callback
>> };
>>
>> +#ifdef CONFIG_HYPFS
>> +static const struct hypfs_entry *cpupool_pooldir_enter(
>> + const struct hypfs_entry *entry);
>> +
>> +static struct hypfs_funcs cpupool_pooldir_funcs = {
>> + .enter = cpupool_pooldir_enter,
>> + .exit = hypfs_node_exit,
>> + .read = hypfs_read_dir,
>> + .write = hypfs_write_deny,
>> + .getsize = hypfs_getsize,
>> + .findentry = hypfs_dir_findentry,
>> +};
>> +
>> +static HYPFS_VARDIR_INIT(cpupool_pooldir, "%u", &cpupool_pooldir_funcs);
>> +
>> +static const struct hypfs_entry *cpupool_pooldir_enter(
>> + const struct hypfs_entry *entry)
>> +{
>> + return &cpupool_pooldir.e;
>> +}
> I have found a more generic way to handle entering a dyndir node,
> resulting in no need to have cpupool_pooldir_enter() and
> cpupool_pooldir_funcs.
>
> This will add some more lines to the previous patch, but less than
> saved here.
Which may then mean it's not a good use of time to look at v2 patch
14, considering there's a lot of other stuff in need of looking at?
Jan
next prev parent reply other threads:[~2020-12-03 14:46 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-01 8:21 [PATCH v2 00/17] xen: support per-cpupool scheduling granularity Juergen Gross
2020-12-01 8:21 ` [PATCH v2 01/17] xen/cpupool: add cpu to sched_res_mask when removing it from cpupool Juergen Gross
2020-12-01 8:21 ` [PATCH v2 02/17] xen/cpupool: add missing bits for per-cpupool scheduling granularity Juergen Gross
2020-12-01 8:21 ` [PATCH v2 03/17] xen/cpupool: sort included headers in cpupool.c Juergen Gross
2020-12-01 8:21 ` [PATCH v2 04/17] xen/cpupool: switch cpupool id to unsigned Juergen Gross
2020-12-01 8:55 ` Jan Beulich
2020-12-01 9:01 ` Jürgen Groß
2020-12-01 9:07 ` Jan Beulich
2020-12-07 9:59 ` Jan Beulich
2020-12-07 14:48 ` Jürgen Groß
2020-12-07 15:00 ` Jan Beulich
2020-12-04 15:52 ` Dario Faggioli
2020-12-07 9:58 ` Jan Beulich
2020-12-07 15:21 ` Jan Beulich
2020-12-01 8:21 ` [PATCH v2 05/17] xen/cpupool: switch cpupool list to normal list interface Juergen Gross
2020-12-01 9:12 ` Jan Beulich
2020-12-01 9:18 ` Jürgen Groß
2020-12-04 16:13 ` Dario Faggioli
2020-12-04 16:16 ` Jürgen Groß
2020-12-04 16:25 ` Dario Faggioli
2020-12-04 16:56 ` Dario Faggioli
2020-12-01 8:21 ` [PATCH v2 06/17] xen/cpupool: use ERR_PTR() for returning error cause from cpupool_create() Juergen Gross
2020-12-02 8:58 ` Jan Beulich
2020-12-02 9:56 ` Jürgen Groß
2020-12-02 10:46 ` Jan Beulich
2020-12-02 10:58 ` Jürgen Groß
2020-12-04 16:29 ` Dario Faggioli
2020-12-01 8:21 ` [PATCH v2 07/17] xen/cpupool: support moving domain between cpupools with different granularity Juergen Gross
2020-12-01 8:21 ` [PATCH v2 08/17] docs: fix hypfs path documentation Juergen Gross
2020-12-01 8:21 ` [PATCH v2 09/17] xen/hypfs: move per-node function pointers into a dedicated struct Juergen Gross
2020-12-02 15:36 ` Jan Beulich
2020-12-02 15:41 ` Jürgen Groß
2020-12-03 8:47 ` Jürgen Groß
2020-12-03 9:12 ` Jan Beulich
2020-12-03 9:51 ` Jürgen Groß
2020-12-01 8:21 ` [PATCH v2 10/17] xen/hypfs: pass real failure reason up from hypfs_get_entry() Juergen Gross
2020-12-01 8:21 ` [PATCH v2 11/17] xen/hypfs: add getsize() and findentry() callbacks to hypfs_funcs Juergen Gross
2020-12-02 15:42 ` Jan Beulich
2020-12-02 15:51 ` Jürgen Groß
2020-12-03 8:12 ` Jan Beulich
2020-12-03 9:39 ` Jürgen Groß
2020-12-04 8:58 ` Jan Beulich
2020-12-04 11:14 ` Jürgen Groß
2020-12-01 8:21 ` [PATCH v2 12/17] xen/hypfs: add new enter() and exit() per node callbacks Juergen Gross
2020-12-03 14:59 ` Jan Beulich
2020-12-03 15:14 ` Jürgen Groß
2020-12-03 15:29 ` Jan Beulich
2020-12-04 8:33 ` Jürgen Groß
2020-12-04 8:30 ` Jan Beulich
2020-12-04 8:35 ` Jürgen Groß
2020-12-01 8:21 ` [PATCH v2 13/17] xen/hypfs: support dynamic hypfs nodes Juergen Gross
2020-12-03 15:08 ` Jan Beulich
2020-12-03 15:18 ` Jürgen Groß
2020-12-01 8:21 ` [PATCH v2 14/17] xen/hypfs: add support for id-based dynamic directories Juergen Gross
2020-12-03 15:44 ` Jan Beulich
2020-12-04 8:52 ` Jürgen Groß
2020-12-04 9:16 ` Jan Beulich
2020-12-04 13:08 ` Jürgen Groß
2020-12-07 7:54 ` Jan Beulich
2020-12-01 8:21 ` [PATCH v2 15/17] xen/cpupool: add cpupool directories Juergen Gross
2020-12-01 9:00 ` Jan Beulich
2020-12-01 9:03 ` Jürgen Groß
2020-12-02 15:46 ` Jürgen Groß
2020-12-03 14:46 ` Jan Beulich [this message]
2020-12-03 15:11 ` Jürgen Groß
2020-12-04 9:10 ` Jan Beulich
2020-12-04 11:08 ` Jürgen Groß
2020-12-04 11:54 ` Jan Beulich
2020-12-01 8:21 ` [PATCH v2 16/17] xen/cpupool: add scheduling granularity entry to cpupool entries Juergen Gross
2020-12-01 8:21 ` [PATCH v2 17/17] xen/cpupool: make per-cpupool sched-gran hypfs node writable Juergen Gross
2020-12-04 23:53 ` [PATCH v2 00/17] xen: support per-cpupool scheduling granularity Andrew Cooper
2020-12-05 7:41 ` Jürgen Groß
2020-12-07 9:00 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0613c7e2-724a-e16c-91f7-f99298d04ab2@suse.com \
--to=jbeulich@suse.com \
--cc=andrew.cooper3@citrix.com \
--cc=dfaggioli@suse.com \
--cc=george.dunlap@citrix.com \
--cc=iwj@xenproject.org \
--cc=jgross@suse.com \
--cc=julien@xen.org \
--cc=sstabellini@kernel.org \
--cc=wl@xen.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).