From: Yang Hongyang <yanghy@cn.fujitsu.com>
To: xen-devel@lists.xen.org
Cc: wei.liu2@citrix.com, ian.campbell@citrix.com,
wency@cn.fujitsu.com, andrew.cooper3@citrix.com,
yunhong.jiang@intel.com, eddie.dong@intel.com,
guijianfeng@cn.fujitsu.com, rshriram@cs.ubc.ca,
ian.jackson@eu.citrix.com
Subject: [PATCH v7 COLO 13/18] COLO proxy: implement setup/teardown of COLO proxy module
Date: Thu, 25 Jun 2015 14:31:07 +0800 [thread overview]
Message-ID: <1435213872-10698-14-git-send-email-yanghy@cn.fujitsu.com> (raw)
In-Reply-To: <1435213872-10698-1-git-send-email-yanghy@cn.fujitsu.com>
setup/teardown of COLO proxy module.
we use netlink to communicate with proxy module.
About colo-proxy module:
https://lkml.org/lkml/2015/6/18/32
How to use:
http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
tools/libxl/Makefile | 1 +
tools/libxl/libxl_colo.h | 2 +
tools/libxl/libxl_colo_proxy.c | 210 +++++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_internal.h | 12 +++
4 files changed, 225 insertions(+)
create mode 100644 tools/libxl/libxl_colo_proxy.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 2e62b88..1beef6c 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -59,6 +59,7 @@ endif
LIBXL_OBJS-y += libxl_remus.o libxl_checkpoint_device.o libxl_remus_disk_drbd.o
LIBXL_OBJS-y += libxl_colo_restore.o libxl_colo_save.o
LIBXL_OBJS-y += libxl_colo_qdisk.o
+LIBXL_OBJS-y += libxl_colo_proxy.o
LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
diff --git a/tools/libxl/libxl_colo.h b/tools/libxl/libxl_colo.h
index 49a430b..46ca4cf 100644
--- a/tools/libxl/libxl_colo.h
+++ b/tools/libxl/libxl_colo.h
@@ -34,4 +34,6 @@ extern void libxl__colo_save_teardown(libxl__egc *egc,
libxl__colo_save_state *css,
int rc);
+extern int colo_proxy_setup(libxl__colo_proxy_state *cps);
+extern void colo_proxy_teardown(libxl__colo_proxy_state *cps);
#endif
diff --git a/tools/libxl/libxl_colo_proxy.c b/tools/libxl/libxl_colo_proxy.c
new file mode 100644
index 0000000..9f1243e
--- /dev/null
+++ b/tools/libxl/libxl_colo_proxy.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2015 FUJITSU LIMITED
+ * Author: Yang Hongyang <yanghy@cn.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+#include "libxl_colo.h"
+#include <linux/netlink.h>
+
+#define NETLINK_COLO 28
+
+enum colo_netlink_op {
+ COLO_QUERY_CHECKPOINT = (NLMSG_MIN_TYPE + 1),
+ COLO_CHECKPOINT,
+ COLO_FAILOVER,
+ COLO_PROXY_INIT,
+ COLO_PROXY_RESET, /* UNUSED, will be used for continuous FT */
+};
+
+/* ========= colo-proxy: helper functions ========== */
+
+static int colo_proxy_send(libxl__colo_proxy_state *cps, uint8_t *buff, uint64_t size, int type)
+{
+ struct sockaddr_nl sa;
+ struct nlmsghdr msg;
+ struct iovec iov;
+ struct msghdr mh;
+ int ret;
+
+ STATE_AO_GC(cps->ao);
+
+ memset(&sa, 0, sizeof(sa));
+ sa.nl_family = AF_NETLINK;
+ sa.nl_pid = 0;
+ sa.nl_groups = 0;
+
+ msg.nlmsg_len = NLMSG_SPACE(0);
+ msg.nlmsg_flags = NLM_F_REQUEST;
+ if (type == COLO_PROXY_INIT) {
+ msg.nlmsg_flags |= NLM_F_ACK;
+ }
+ msg.nlmsg_seq = 0;
+ /* This is untrusty */
+ msg.nlmsg_pid = cps->index;
+ msg.nlmsg_type = type;
+
+ iov.iov_base = &msg;
+ iov.iov_len = msg.nlmsg_len;
+
+ mh.msg_name = &sa;
+ mh.msg_namelen = sizeof(sa);
+ mh.msg_iov = &iov;
+ mh.msg_iovlen = 1;
+ mh.msg_control = NULL;
+ mh.msg_controllen = 0;
+ mh.msg_flags = 0;
+
+ ret = sendmsg(cps->sock_fd, &mh, 0);
+ if (ret <= 0) {
+ LOG(ERROR, "can't send msg to kernel by netlink: %s",
+ strerror(errno));
+ }
+
+ return ret;
+}
+
+/* error: return -1, otherwise return 0 */
+static int64_t colo_proxy_recv(libxl__colo_proxy_state *cps, uint8_t **buff, int flags)
+{
+ struct sockaddr_nl sa;
+ struct iovec iov;
+ struct msghdr mh = {
+ .msg_name = &sa,
+ .msg_namelen = sizeof(sa),
+ .msg_iov = &iov,
+ .msg_iovlen = 1,
+ };
+ uint32_t size = 16384;
+ int64_t len = 0;
+ int ret;
+
+ STATE_AO_GC(cps->ao);
+ uint8_t *tmp = libxl__malloc(NOGC, size);
+
+ iov.iov_base = tmp;
+ iov.iov_len = size;
+next:
+ ret = recvmsg(cps->sock_fd, &mh, flags);
+ if (ret <= 0) {
+ goto out;
+ }
+
+ len += ret;
+ if (mh.msg_flags & MSG_TRUNC) {
+ size += 16384;
+ tmp = libxl__realloc(NOGC, tmp, size);
+ iov.iov_base = tmp + len;
+ iov.iov_len = size - len;
+ goto next;
+ }
+
+ *buff = tmp;
+ return len;
+
+out:
+ free(tmp);
+ *buff = NULL;
+ return ret;
+}
+
+/* ========= colo-proxy: setup and teardown ========== */
+
+int colo_proxy_setup(libxl__colo_proxy_state *cps)
+{
+ int skfd = 0;
+ struct sockaddr_nl sa;
+ struct nlmsghdr *h;
+ struct timeval tv = {0, 500000}; /* timeout for recvmsg from kernel */
+ int i = 1;
+ int ret = ERROR_FAIL;
+ uint8_t *buff = NULL;
+ int64_t size;
+
+ STATE_AO_GC(cps->ao);
+
+ skfd = socket(PF_NETLINK, SOCK_RAW, NETLINK_COLO);
+ if (skfd < 0) {
+ LOG(ERROR, "can not create a netlink socket: %s", strerror(errno));
+ goto out;
+ }
+ cps->sock_fd = skfd;
+ memset(&sa, 0, sizeof(sa));
+ sa.nl_family = AF_NETLINK;
+ sa.nl_groups = 0;
+retry:
+ sa.nl_pid = i++;
+
+ if (i > 10) {
+ LOG(ERROR, "netlink bind error");
+ goto out;
+ }
+
+ ret = bind(skfd, (struct sockaddr *)&sa, sizeof(sa));
+ if (ret < 0 && errno == EADDRINUSE) {
+ LOG(ERROR, "colo index %d has already in used", sa.nl_pid);
+ goto retry;
+ }
+
+ cps->index = sa.nl_pid;
+ ret = colo_proxy_send(cps, NULL, 0, COLO_PROXY_INIT);
+ if (ret < 0) {
+ goto out;
+ }
+ setsockopt(cps->sock_fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv));
+ ret = -1;
+ size = colo_proxy_recv(cps, &buff, 0);
+ /* disable SO_RCVTIMEO */
+ tv.tv_usec = 0;
+ setsockopt(cps->sock_fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv));
+ if (size < 0) {
+ LOG(ERROR, "Can't recv msg from kernel by netlink: %s",
+ strerror(errno));
+ goto out;
+ }
+
+ if (size) {
+ h = (struct nlmsghdr *)buff;
+
+ if (h->nlmsg_type == NLMSG_ERROR) {
+ struct nlmsgerr *err = (struct nlmsgerr *)NLMSG_DATA(h);
+ if (size - sizeof(*h) < sizeof(*err)) {
+ goto out;
+ }
+ ret = -err->error;
+ if (ret) {
+ goto out;
+ }
+ }
+ }
+
+ ret = 0;
+
+out:
+ free(buff);
+ if (ret) {
+ close(cps->sock_fd);
+ cps->sock_fd = -1;
+ }
+ return ret;
+}
+
+void colo_proxy_teardown(libxl__colo_proxy_state *cps)
+{
+ if (cps->sock_fd >= 0) {
+ close(cps->sock_fd);
+ cps->sock_fd = -1;
+ }
+}
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 18adf66..2e8b3d4 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2933,6 +2933,15 @@ static inline bool libxl__stream_read_inuse(
}
/*----- colo related state structure -----*/
+typedef struct libxl__colo_proxy_state libxl__colo_proxy_state;
+struct libxl__colo_proxy_state {
+ /* set by caller of colo_proxy_setup */
+ libxl__ao *ao;
+
+ int sock_fd;
+ int index;
+};
+
typedef struct libxl__colo_save_state libxl__colo_save_state;
struct libxl__colo_save_state {
libxl__checkpoint_devices_state cds;
@@ -2947,6 +2956,9 @@ struct libxl__colo_save_state {
/* private, used by qdisk block replication */
bool qdisk_setuped;
+
+ /* private, used by colo-proxy */
+ libxl__colo_proxy_state cps;
};
/*----- Domain suspend (save) state structure -----*/
--
1.9.1
next prev parent reply other threads:[~2015-06-25 6:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 01/18] docs: add colo readme Yang Hongyang
2015-07-14 15:15 ` Ian Campbell
2015-06-25 6:30 ` [PATCH v7 COLO 02/18] tools/libxl: handle colo_context records in a libxl migration v2 stream Yang Hongyang
2015-07-14 15:19 ` Ian Campbell
2015-07-15 0:34 ` Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 03/18] tools/libxl: write colo_context records into the stream Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 04/18] secondary vm suspend/resume/checkpoint code Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 05/18] primary " Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 06/18] libxc/restore: support COLO restore Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 07/18] libxc/restore: send dirty bitmap to primary when checkpoint under colo Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 08/18] send store mfn and console mfn to xl before resuming secondary vm Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 09/18] libxc/save: support COLO save Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 10/18] implement the cmdline for COLO Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 11/18] Support colo mode for qemu disk Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 12/18] COLO: use qemu block replication Yang Hongyang
2015-06-25 6:31 ` Yang Hongyang [this message]
2015-06-25 6:31 ` [PATCH v7 COLO 14/18] COLO proxy: preresume, postresume and checkpoint Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 15/18] COLO nic: implement COLO nic subkind Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 16/18] setup and control colo proxy on primary side Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 17/18] setup and control colo proxy on secondary side Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 18/18] cmdline switches and config vars to control colo-proxy Yang Hongyang
2015-07-14 15:55 ` [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Ian Campbell
2015-07-15 0:41 ` Yang Hongyang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435213872-10698-14-git-send-email-yanghy@cn.fujitsu.com \
--to=yanghy@cn.fujitsu.com \
--cc=andrew.cooper3@citrix.com \
--cc=eddie.dong@intel.com \
--cc=guijianfeng@cn.fujitsu.com \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=rshriram@cs.ubc.ca \
--cc=wei.liu2@citrix.com \
--cc=wency@cn.fujitsu.com \
--cc=xen-devel@lists.xen.org \
--cc=yunhong.jiang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).