xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V2 0/4] Extend <hap> to a tristate
@ 2016-03-01  4:00 Jim Fehlig
  2016-03-01  4:00 ` [PATCH V2 1/4] conf: add 'state' attribute to <hap> feature Jim Fehlig
                   ` (6 more replies)
  0 siblings, 7 replies; 14+ messages in thread
From: Jim Fehlig @ 2016-03-01  4:00 UTC (permalink / raw)
  To: libvir-list; +Cc: xen-devel

An expanded V2 of

https://www.redhat.com/archives/libvir-list/2016-February/msg00140.html

In V2, the <hap> feature is extended with a state='on|off' attribute to
allow differentiating the 'on' and 'off' states with not set (or hypervisor
default).

Obviously post 1.3.2 material. See individual patches for details.

Jim Fehlig (4):
  conf: add 'state' attribute to <hap> feature
  xenconfig: change 'hap' setting to align with Xen behavior
  Xen drivers: show hap enabled by default in capabilities
  libxl: support enabling and disabling <hap> feature

 docs/formatdomain.html.in                          |  6 ++-
 docs/schemas/domaincommon.rng                      |  6 ++-
 src/conf/domain_conf.c                             |  4 +-
 src/libxl/libxl_conf.c                             | 20 ++++++--
 src/xen/xen_hypervisor.c                           |  2 +-
 src/xenconfig/xen_common.c                         | 14 ++---
 .../test-disk-positional-parms-full.cfg            |  1 -
 .../test-disk-positional-parms-partial.cfg         |  1 -
 ...est-fullvirt-direct-kernel-boot-bogus-extra.cfg |  1 -
 .../test-fullvirt-direct-kernel-boot-extra.cfg     |  1 -
 .../test-fullvirt-direct-kernel-boot.cfg           |  1 -
 tests/xlconfigdata/test-fullvirt-multiusb.cfg      |  1 -
 tests/xlconfigdata/test-fullvirt-nohap.cfg         | 26 ++++++++++
 tests/xlconfigdata/test-fullvirt-nohap.xml         | 59 ++++++++++++++++++++++
 tests/xlconfigdata/test-new-disk.cfg               |  1 -
 tests/xlconfigdata/test-rbd-multihost-noauth.cfg   |  1 -
 tests/xlconfigdata/test-spice-features.cfg         |  1 -
 tests/xlconfigdata/test-spice.cfg                  |  1 -
 tests/xlconfigdata/test-vif-rate.cfg               |  1 -
 tests/xlconfigtest.c                               |  1 +
 tests/xmconfigdata/test-escape-paths.cfg           |  1 -
 .../xmconfigdata/test-fullvirt-default-feature.cfg |  1 -
 tests/xmconfigdata/test-fullvirt-force-hpet.cfg    |  1 -
 tests/xmconfigdata/test-fullvirt-force-nohpet.cfg  |  1 -
 tests/xmconfigdata/test-fullvirt-localtime.cfg     |  1 -
 tests/xmconfigdata/test-fullvirt-net-netfront.cfg  |  1 -
 tests/xmconfigdata/test-fullvirt-new-cdrom.cfg     |  1 -
 tests/xmconfigdata/test-fullvirt-nohap.cfg         | 28 ++++++++++
 tests/xmconfigdata/test-fullvirt-nohap.xml         | 51 +++++++++++++++++++
 tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg  |  1 -
 .../test-fullvirt-serial-dev-2-ports.cfg           |  1 -
 .../test-fullvirt-serial-dev-2nd-port.cfg          |  1 -
 tests/xmconfigdata/test-fullvirt-serial-file.cfg   |  1 -
 tests/xmconfigdata/test-fullvirt-serial-null.cfg   |  1 -
 tests/xmconfigdata/test-fullvirt-serial-pipe.cfg   |  1 -
 tests/xmconfigdata/test-fullvirt-serial-pty.cfg    |  1 -
 tests/xmconfigdata/test-fullvirt-serial-stdio.cfg  |  1 -
 .../test-fullvirt-serial-tcp-telnet.cfg            |  1 -
 tests/xmconfigdata/test-fullvirt-serial-tcp.cfg    |  1 -
 tests/xmconfigdata/test-fullvirt-serial-udp.cfg    |  1 -
 tests/xmconfigdata/test-fullvirt-serial-unix.cfg   |  1 -
 tests/xmconfigdata/test-fullvirt-sound.cfg         |  1 -
 tests/xmconfigdata/test-fullvirt-usbmouse.cfg      |  1 -
 tests/xmconfigdata/test-fullvirt-usbtablet.cfg     |  1 -
 tests/xmconfigdata/test-fullvirt-utc.cfg           |  1 -
 tests/xmconfigdata/test-no-source-cdrom.cfg        |  1 -
 tests/xmconfigdata/test-pci-devs.cfg               |  1 -
 tests/xmconfigtest.c                               |  1 +
 48 files changed, 202 insertions(+), 52 deletions(-)
 create mode 100644 tests/xlconfigdata/test-fullvirt-nohap.cfg
 create mode 100644 tests/xlconfigdata/test-fullvirt-nohap.xml
 create mode 100755 tests/xmconfigdata/test-fullvirt-nohap.cfg
 create mode 100644 tests/xmconfigdata/test-fullvirt-nohap.xml

-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH V2 1/4] conf: add 'state' attribute to <hap> feature
  2016-03-01  4:00 [PATCH V2 0/4] Extend <hap> to a tristate Jim Fehlig
@ 2016-03-01  4:00 ` Jim Fehlig
  2016-03-08 16:37   ` [libvirt] " Joao Martins
  2016-03-01  4:00 ` [PATCH V2 2/4] xenconfig: change 'hap' setting to align with Xen behavior Jim Fehlig
                   ` (5 subsequent siblings)
  6 siblings, 1 reply; 14+ messages in thread
From: Jim Fehlig @ 2016-03-01  4:00 UTC (permalink / raw)
  To: libvir-list; +Cc: Jim Fehlig, xen-devel

Most hypervisors use Hardware Assisted Paging by default and don't
require specifying the feature in domain conf. But some hypervisors
support disabling HAP on a per-domain basis. To enable HAP by default
yet provide a knob to disable it, extend the <hap> feature with a
'state=on|off' attribute, similar to <pvspinlock> and <vmport> features.

In the absence of <hap>, the hypervisor default (on) is used. <hap>
without the state attribute would be the same as <hap state='on'/> for
backwards compatibility. And of course <hap state='off'/> disables hap.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
---
 docs/formatdomain.html.in     | 6 ++++--
 docs/schemas/domaincommon.rng | 6 +++++-
 src/conf/domain_conf.c        | 4 ++--
 3 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 5016772..c06bcf3 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -1494,8 +1494,10 @@
       Interrupt) for the guest.
       </dd>
       <dt><code>hap</code></dt>
-      <dd>Enable use of Hardware Assisted Paging if available in
-        the hardware.
+      <dd>Depending on the <code>state</code> attribute (values <code>on</code>,
+        <code>off</code>) enable or disable use of Hardware Assisted Paging.
+        The default is <code>on</code> if the hypervisor detects availability
+        of Hardware Assisted Paging.
       </dd>
       <dt><code>viridian</code></dt>
       <dd>Enable Viridian hypervisor extensions for paravirtualizing
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index 67af93a..dd6e93a 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -4108,7 +4108,11 @@
           </optional>
           <optional>
             <element name="hap">
-              <empty/>
+              <optional>
+                <attribute name="state">
+                  <ref name="virOnOff"/>
+                </attribute>
+              </optional>
             </element>
           </optional>
           <optional>
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 79758d4..714bbfc 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -15296,7 +15296,6 @@ virDomainDefParseXML(xmlDocPtr xml,
             /* fallthrough */
         case VIR_DOMAIN_FEATURE_ACPI:
         case VIR_DOMAIN_FEATURE_PAE:
-        case VIR_DOMAIN_FEATURE_HAP:
         case VIR_DOMAIN_FEATURE_VIRIDIAN:
         case VIR_DOMAIN_FEATURE_PRIVNET:
         case VIR_DOMAIN_FEATURE_HYPERV:
@@ -15321,6 +15320,7 @@ virDomainDefParseXML(xmlDocPtr xml,
             ctxt->node = node;
             break;
 
+        case VIR_DOMAIN_FEATURE_HAP:
         case VIR_DOMAIN_FEATURE_PMU:
         case VIR_DOMAIN_FEATURE_PVSPINLOCK:
         case VIR_DOMAIN_FEATURE_VMPORT:
@@ -22043,7 +22043,6 @@ virDomainDefFormatInternal(virDomainDefPtr def,
             switch ((virDomainFeature) i) {
             case VIR_DOMAIN_FEATURE_ACPI:
             case VIR_DOMAIN_FEATURE_PAE:
-            case VIR_DOMAIN_FEATURE_HAP:
             case VIR_DOMAIN_FEATURE_VIRIDIAN:
             case VIR_DOMAIN_FEATURE_PRIVNET:
                 switch ((virTristateSwitch) def->features[i]) {
@@ -22065,6 +22064,7 @@ virDomainDefFormatInternal(virDomainDefPtr def,
 
                 break;
 
+            case VIR_DOMAIN_FEATURE_HAP:
             case VIR_DOMAIN_FEATURE_PMU:
             case VIR_DOMAIN_FEATURE_PVSPINLOCK:
             case VIR_DOMAIN_FEATURE_VMPORT:
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH V2 2/4] xenconfig: change 'hap' setting to align with Xen behavior
  2016-03-01  4:00 [PATCH V2 0/4] Extend <hap> to a tristate Jim Fehlig
  2016-03-01  4:00 ` [PATCH V2 1/4] conf: add 'state' attribute to <hap> feature Jim Fehlig
@ 2016-03-01  4:00 ` Jim Fehlig
  2016-03-08 16:37   ` [libvirt] " Joao Martins
  2016-03-01  4:00 ` [PATCH V2 3/4] Xen drivers: show hap enabled by default in capabilities Jim Fehlig
                   ` (4 subsequent siblings)
  6 siblings, 1 reply; 14+ messages in thread
From: Jim Fehlig @ 2016-03-01  4:00 UTC (permalink / raw)
  To: libvir-list; +Cc: Jim Fehlig, xen-devel

hap is enabled by default in xm and xl config and usually only
specified when it is desirable to disable hap (hap = 0). Change
the xm,xl <-> xml converter to behave similarly. I.e. only
produce 'hap = 0' when <hap state='off'/> and vice versa.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
---
 src/xenconfig/xen_common.c                         | 14 ++---
 .../test-disk-positional-parms-full.cfg            |  1 -
 .../test-disk-positional-parms-partial.cfg         |  1 -
 ...est-fullvirt-direct-kernel-boot-bogus-extra.cfg |  1 -
 .../test-fullvirt-direct-kernel-boot-extra.cfg     |  1 -
 .../test-fullvirt-direct-kernel-boot.cfg           |  1 -
 tests/xlconfigdata/test-fullvirt-multiusb.cfg      |  1 -
 tests/xlconfigdata/test-fullvirt-nohap.cfg         | 26 ++++++++++
 tests/xlconfigdata/test-fullvirt-nohap.xml         | 59 ++++++++++++++++++++++
 tests/xlconfigdata/test-new-disk.cfg               |  1 -
 tests/xlconfigdata/test-rbd-multihost-noauth.cfg   |  1 -
 tests/xlconfigdata/test-spice-features.cfg         |  1 -
 tests/xlconfigdata/test-spice.cfg                  |  1 -
 tests/xlconfigdata/test-vif-rate.cfg               |  1 -
 tests/xlconfigtest.c                               |  1 +
 tests/xmconfigdata/test-escape-paths.cfg           |  1 -
 .../xmconfigdata/test-fullvirt-default-feature.cfg |  1 -
 tests/xmconfigdata/test-fullvirt-force-hpet.cfg    |  1 -
 tests/xmconfigdata/test-fullvirt-force-nohpet.cfg  |  1 -
 tests/xmconfigdata/test-fullvirt-localtime.cfg     |  1 -
 tests/xmconfigdata/test-fullvirt-net-netfront.cfg  |  1 -
 tests/xmconfigdata/test-fullvirt-new-cdrom.cfg     |  1 -
 tests/xmconfigdata/test-fullvirt-nohap.cfg         | 28 ++++++++++
 tests/xmconfigdata/test-fullvirt-nohap.xml         | 51 +++++++++++++++++++
 tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg  |  1 -
 .../test-fullvirt-serial-dev-2-ports.cfg           |  1 -
 .../test-fullvirt-serial-dev-2nd-port.cfg          |  1 -
 tests/xmconfigdata/test-fullvirt-serial-file.cfg   |  1 -
 tests/xmconfigdata/test-fullvirt-serial-null.cfg   |  1 -
 tests/xmconfigdata/test-fullvirt-serial-pipe.cfg   |  1 -
 tests/xmconfigdata/test-fullvirt-serial-pty.cfg    |  1 -
 tests/xmconfigdata/test-fullvirt-serial-stdio.cfg  |  1 -
 .../test-fullvirt-serial-tcp-telnet.cfg            |  1 -
 tests/xmconfigdata/test-fullvirt-serial-tcp.cfg    |  1 -
 tests/xmconfigdata/test-fullvirt-serial-udp.cfg    |  1 -
 tests/xmconfigdata/test-fullvirt-serial-unix.cfg   |  1 -
 tests/xmconfigdata/test-fullvirt-sound.cfg         |  1 -
 tests/xmconfigdata/test-fullvirt-usbmouse.cfg      |  1 -
 tests/xmconfigdata/test-fullvirt-usbtablet.cfg     |  1 -
 tests/xmconfigdata/test-fullvirt-utc.cfg           |  1 -
 tests/xmconfigdata/test-no-source-cdrom.cfg        |  1 -
 tests/xmconfigdata/test-pci-devs.cfg               |  1 -
 tests/xmconfigtest.c                               |  1 +
 43 files changed, 173 insertions(+), 43 deletions(-)

diff --git a/src/xenconfig/xen_common.c b/src/xenconfig/xen_common.c
index 828c8e9..4dcd484 100644
--- a/src/xenconfig/xen_common.c
+++ b/src/xenconfig/xen_common.c
@@ -528,11 +528,11 @@ xenParseCPUFeatures(virConfPtr conf, virDomainDefPtr def)
 
         else if (val)
             def->features[VIR_DOMAIN_FEATURE_APIC] = VIR_TRISTATE_SWITCH_ON;
-        if (xenConfigGetBool(conf, "hap", &val, 0) < 0)
+        if (xenConfigGetBool(conf, "hap", &val, 1) < 0)
             return -1;
 
-        else if (val)
-            def->features[VIR_DOMAIN_FEATURE_HAP] = VIR_TRISTATE_SWITCH_ON;
+        else if (!val)
+            def->features[VIR_DOMAIN_FEATURE_HAP] = VIR_TRISTATE_SWITCH_OFF;
         if (xenConfigGetBool(conf, "viridian", &val, 0) < 0)
             return -1;
 
@@ -1572,10 +1572,10 @@ xenFormatCPUFeatures(virConfPtr conf, virDomainDefPtr def)
                             VIR_TRISTATE_SWITCH_ON) ? 1 : 0) < 0)
             return -1;
 
-        if (xenConfigSetInt(conf, "hap",
-                            (def->features[VIR_DOMAIN_FEATURE_HAP] ==
-                             VIR_TRISTATE_SWITCH_ON) ? 1 : 0) < 0)
-            return -1;
+        if (def->features[VIR_DOMAIN_FEATURE_HAP] == VIR_TRISTATE_SWITCH_OFF) {
+            if (xenConfigSetInt(conf, "hap", 0) < 0)
+                return -1;
+        }
 
         if (xenConfigSetInt(conf, "viridian",
                             (def->features[VIR_DOMAIN_FEATURE_VIRIDIAN] ==
diff --git a/tests/xlconfigdata/test-disk-positional-parms-full.cfg b/tests/xlconfigdata/test-disk-positional-parms-full.cfg
index 026e451..c5bbb03 100644
--- a/tests/xlconfigdata/test-disk-positional-parms-full.cfg
+++ b/tests/xlconfigdata/test-disk-positional-parms-full.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigdata/test-disk-positional-parms-partial.cfg b/tests/xlconfigdata/test-disk-positional-parms-partial.cfg
index 0591037..09eeb94 100644
--- a/tests/xlconfigdata/test-disk-positional-parms-partial.cfg
+++ b/tests/xlconfigdata/test-disk-positional-parms-partial.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-bogus-extra.cfg b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-bogus-extra.cfg
index 83ab975..8012737 100644
--- a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-bogus-extra.cfg
+++ b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-bogus-extra.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-extra.cfg b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-extra.cfg
index f452af6..4ed5a90 100644
--- a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-extra.cfg
+++ b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-extra.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot.cfg b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot.cfg
index 9ebbc89..110f0a0 100644
--- a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot.cfg
+++ b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigdata/test-fullvirt-multiusb.cfg b/tests/xlconfigdata/test-fullvirt-multiusb.cfg
index 097de88..003eb2b 100755
--- a/tests/xlconfigdata/test-fullvirt-multiusb.cfg
+++ b/tests/xlconfigdata/test-fullvirt-multiusb.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigdata/test-fullvirt-nohap.cfg b/tests/xlconfigdata/test-fullvirt-nohap.cfg
new file mode 100644
index 0000000..44bfa3c
--- /dev/null
+++ b/tests/xlconfigdata/test-fullvirt-nohap.cfg
@@ -0,0 +1,26 @@
+name = "XenGuest2"
+uuid = "c7a5fdb2-cdaf-9455-926a-d65c16db1809"
+maxmem = 579
+memory = 394
+vcpus = 1
+pae = 1
+acpi = 1
+apic = 1
+hap = 0
+viridian = 0
+rtc_timeoffset = 0
+localtime = 0
+on_poweroff = "destroy"
+on_reboot = "restart"
+on_crash = "restart"
+device_model = "/usr/lib/xen/bin/qemu-dm"
+sdl = 0
+vnc = 1
+vncunused = 1
+vnclisten = "127.0.0.1"
+vif = [ "mac=00:16:3e:66:92:9c,bridge=xenbr1,script=vif-bridge,model=e1000,rate=10240KB/s" ]
+parallel = "none"
+serial = "none"
+builder = "hvm"
+boot = "d"
+disk = [ "format=raw,vdev=hda,access=rw,backendtype=phy,target=/dev/HostVG/XenGuest2", "format=qcow2,vdev=hdb,access=rw,backendtype=qdisk,target=/var/lib/libvirt/images/XenGuest2-home", "format=raw,vdev=hdc,access=ro,backendtype=qdisk,devtype=cdrom,target=/root/boot.iso" ]
diff --git a/tests/xlconfigdata/test-fullvirt-nohap.xml b/tests/xlconfigdata/test-fullvirt-nohap.xml
new file mode 100644
index 0000000..d9dad20
--- /dev/null
+++ b/tests/xlconfigdata/test-fullvirt-nohap.xml
@@ -0,0 +1,59 @@
+<domain type='xen'>
+  <name>XenGuest2</name>
+  <uuid>c7a5fdb2-cdaf-9455-926a-d65c16db1809</uuid>
+  <memory unit='KiB'>592896</memory>
+  <currentMemory unit='KiB'>403456</currentMemory>
+  <vcpu placement='static'>1</vcpu>
+  <os>
+    <type arch='x86_64' machine='xenfv'>hvm</type>
+    <loader type='rom'>/usr/lib/xen/boot/hvmloader</loader>
+    <boot dev='cdrom'/>
+  </os>
+  <features>
+    <acpi/>
+    <apic/>
+    <pae/>
+    <hap state='off'/>
+  </features>
+  <clock offset='variable' adjustment='0' basis='utc'/>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>restart</on_crash>
+  <devices>
+    <emulator>/usr/lib/xen/bin/qemu-dm</emulator>
+    <disk type='block' device='disk'>
+      <driver name='phy' type='raw'/>
+      <source dev='/dev/HostVG/XenGuest2'/>
+      <target dev='hda' bus='ide'/>
+      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='disk'>
+      <driver name='qemu' type='qcow2'/>
+      <source file='/var/lib/libvirt/images/XenGuest2-home'/>
+      <target dev='hdb' bus='ide'/>
+      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
+    </disk>
+    <disk type='file' device='cdrom'>
+      <driver name='qemu' type='raw'/>
+      <source file='/root/boot.iso'/>
+      <target dev='hdc' bus='ide'/>
+      <readonly/>
+      <address type='drive' controller='0' bus='1' target='0' unit='0'/>
+    </disk>
+    <controller type='ide' index='0'/>
+    <interface type='bridge'>
+      <mac address='00:16:3e:66:92:9c'/>
+      <source bridge='xenbr1'/>
+      <bandwidth>
+        <outbound average='10240'/>
+      </bandwidth>
+      <script path='vif-bridge'/>
+      <model type='e1000'/>
+    </interface>
+    <input type='mouse' bus='ps2'/>
+    <input type='keyboard' bus='ps2'/>
+    <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
+      <listen type='address' address='127.0.0.1'/>
+    </graphics>
+  </devices>
+</domain>
diff --git a/tests/xlconfigdata/test-new-disk.cfg b/tests/xlconfigdata/test-new-disk.cfg
index 4a5b66e..b079056 100644
--- a/tests/xlconfigdata/test-new-disk.cfg
+++ b/tests/xlconfigdata/test-new-disk.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigdata/test-rbd-multihost-noauth.cfg b/tests/xlconfigdata/test-rbd-multihost-noauth.cfg
index cfe00e5..99f0889 100644
--- a/tests/xlconfigdata/test-rbd-multihost-noauth.cfg
+++ b/tests/xlconfigdata/test-rbd-multihost-noauth.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigdata/test-spice-features.cfg b/tests/xlconfigdata/test-spice-features.cfg
index 8c1ca18..48dcd86 100644
--- a/tests/xlconfigdata/test-spice-features.cfg
+++ b/tests/xlconfigdata/test-spice-features.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigdata/test-spice.cfg b/tests/xlconfigdata/test-spice.cfg
index 84b3ae6..7ab23e1 100644
--- a/tests/xlconfigdata/test-spice.cfg
+++ b/tests/xlconfigdata/test-spice.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigdata/test-vif-rate.cfg b/tests/xlconfigdata/test-vif-rate.cfg
index 44bfa3c..db932e5 100644
--- a/tests/xlconfigdata/test-vif-rate.cfg
+++ b/tests/xlconfigdata/test-vif-rate.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xlconfigtest.c b/tests/xlconfigtest.c
index 2668a76..ba1bed0 100644
--- a/tests/xlconfigtest.c
+++ b/tests/xlconfigtest.c
@@ -213,6 +213,7 @@ mymain(void)
     DO_TEST("spice");
     DO_TEST("spice-features");
     DO_TEST("vif-rate");
+    DO_TEST("fullvirt-nohap");
 
     DO_TEST("paravirt-cmdline");
     DO_TEST_FORMAT("paravirt-cmdline-extra-root");
diff --git a/tests/xmconfigdata/test-escape-paths.cfg b/tests/xmconfigdata/test-escape-paths.cfg
index 98570bd..f13254e 100644
--- a/tests/xmconfigdata/test-escape-paths.cfg
+++ b/tests/xmconfigdata/test-escape-paths.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-default-feature.cfg b/tests/xmconfigdata/test-fullvirt-default-feature.cfg
index c9d072d..f72575b 100644
--- a/tests/xmconfigdata/test-fullvirt-default-feature.cfg
+++ b/tests/xmconfigdata/test-fullvirt-default-feature.cfg
@@ -7,7 +7,6 @@ builder = "hvm"
 kernel = "/usr/lib/xen/boot/hvmloader"
 boot = "d"
 hpet = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-force-hpet.cfg b/tests/xmconfigdata/test-fullvirt-force-hpet.cfg
index b89ed42..d73b4e9 100644
--- a/tests/xmconfigdata/test-fullvirt-force-hpet.cfg
+++ b/tests/xmconfigdata/test-fullvirt-force-hpet.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 hpet = 1
 rtc_timeoffset = 0
diff --git a/tests/xmconfigdata/test-fullvirt-force-nohpet.cfg b/tests/xmconfigdata/test-fullvirt-force-nohpet.cfg
index 99e6d38..d670d36 100644
--- a/tests/xmconfigdata/test-fullvirt-force-nohpet.cfg
+++ b/tests/xmconfigdata/test-fullvirt-force-nohpet.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 hpet = 0
 rtc_timeoffset = 0
diff --git a/tests/xmconfigdata/test-fullvirt-localtime.cfg b/tests/xmconfigdata/test-fullvirt-localtime.cfg
index 5d07423..d51be21 100755
--- a/tests/xmconfigdata/test-fullvirt-localtime.cfg
+++ b/tests/xmconfigdata/test-fullvirt-localtime.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 1
diff --git a/tests/xmconfigdata/test-fullvirt-net-netfront.cfg b/tests/xmconfigdata/test-fullvirt-net-netfront.cfg
index da1d368..254bd93 100644
--- a/tests/xmconfigdata/test-fullvirt-net-netfront.cfg
+++ b/tests/xmconfigdata/test-fullvirt-net-netfront.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-new-cdrom.cfg b/tests/xmconfigdata/test-fullvirt-new-cdrom.cfg
index 67e2511..5e12c5e 100755
--- a/tests/xmconfigdata/test-fullvirt-new-cdrom.cfg
+++ b/tests/xmconfigdata/test-fullvirt-new-cdrom.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-nohap.cfg b/tests/xmconfigdata/test-fullvirt-nohap.cfg
new file mode 100755
index 0000000..67e2511
--- /dev/null
+++ b/tests/xmconfigdata/test-fullvirt-nohap.cfg
@@ -0,0 +1,28 @@
+name = "XenGuest2"
+uuid = "c7a5fdb2-cdaf-9455-926a-d65c16db1809"
+maxmem = 579
+memory = 394
+vcpus = 1
+pae = 1
+acpi = 1
+apic = 1
+hap = 0
+viridian = 0
+rtc_timeoffset = 0
+localtime = 0
+on_poweroff = "destroy"
+on_reboot = "restart"
+on_crash = "restart"
+device_model = "/usr/lib/xen/bin/qemu-dm"
+sdl = 0
+vnc = 1
+vncunused = 1
+vnclisten = "127.0.0.1"
+vncpasswd = "123poi"
+vif = [ "mac=00:16:3e:66:92:9c,bridge=xenbr1,script=vif-bridge,model=e1000" ]
+parallel = "none"
+serial = "none"
+builder = "hvm"
+kernel = "/usr/lib/xen/boot/hvmloader"
+boot = "d"
+disk = [ "phy:/dev/HostVG/XenGuest2,hda,w", "file:/root/boot.iso,hdc:cdrom,r" ]
diff --git a/tests/xmconfigdata/test-fullvirt-nohap.xml b/tests/xmconfigdata/test-fullvirt-nohap.xml
new file mode 100644
index 0000000..671c71b
--- /dev/null
+++ b/tests/xmconfigdata/test-fullvirt-nohap.xml
@@ -0,0 +1,51 @@
+<domain type='xen'>
+  <name>XenGuest2</name>
+  <uuid>c7a5fdb2-cdaf-9455-926a-d65c16db1809</uuid>
+  <memory unit='KiB'>592896</memory>
+  <currentMemory unit='KiB'>403456</currentMemory>
+  <vcpu placement='static'>1</vcpu>
+  <os>
+    <type arch='i686' machine='xenfv'>hvm</type>
+    <loader type='rom'>/usr/lib/xen/boot/hvmloader</loader>
+    <boot dev='cdrom'/>
+  </os>
+  <features>
+    <acpi/>
+    <apic/>
+    <pae/>
+    <hap state='off'/>
+  </features>
+  <clock offset='variable' adjustment='0' basis='utc'/>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>restart</on_crash>
+  <devices>
+    <emulator>/usr/lib/xen/bin/qemu-dm</emulator>
+    <disk type='block' device='disk'>
+      <driver name='phy'/>
+      <source dev='/dev/HostVG/XenGuest2'/>
+      <target dev='hda' bus='ide'/>
+      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='file' device='cdrom'>
+      <driver name='file'/>
+      <source file='/root/boot.iso'/>
+      <target dev='hdc' bus='ide'/>
+      <readonly/>
+      <address type='drive' controller='0' bus='1' target='0' unit='0'/>
+    </disk>
+    <controller type='ide' index='0'/>
+    <interface type='bridge'>
+      <mac address='00:16:3e:66:92:9c'/>
+      <source bridge='xenbr1'/>
+      <script path='vif-bridge'/>
+      <model type='e1000'/>
+    </interface>
+    <input type='mouse' bus='ps2'/>
+    <input type='keyboard' bus='ps2'/>
+    <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1' passwd='123poi'>
+      <listen type='address' address='127.0.0.1'/>
+    </graphics>
+    <memballoon model='xen'/>
+  </devices>
+</domain>
diff --git a/tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg b/tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg
index 1bbce56..df7b621 100755
--- a/tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg
+++ b/tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg b/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg
index c722792..f4963e1 100644
--- a/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-dev-2nd-port.cfg b/tests/xmconfigdata/test-fullvirt-serial-dev-2nd-port.cfg
index 4baffe6..2dc3258 100644
--- a/tests/xmconfigdata/test-fullvirt-serial-dev-2nd-port.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-dev-2nd-port.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-file.cfg b/tests/xmconfigdata/test-fullvirt-serial-file.cfg
index 3d26e26..d5bd759 100755
--- a/tests/xmconfigdata/test-fullvirt-serial-file.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-file.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-null.cfg b/tests/xmconfigdata/test-fullvirt-serial-null.cfg
index 6b0f2a4..d38f084 100755
--- a/tests/xmconfigdata/test-fullvirt-serial-null.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-null.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-pipe.cfg b/tests/xmconfigdata/test-fullvirt-serial-pipe.cfg
index 2bd8377..9ed3fb7 100755
--- a/tests/xmconfigdata/test-fullvirt-serial-pipe.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-pipe.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-pty.cfg b/tests/xmconfigdata/test-fullvirt-serial-pty.cfg
index 022f975..b055f79 100755
--- a/tests/xmconfigdata/test-fullvirt-serial-pty.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-pty.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-stdio.cfg b/tests/xmconfigdata/test-fullvirt-serial-stdio.cfg
index c339a94..5fb13cd 100755
--- a/tests/xmconfigdata/test-fullvirt-serial-stdio.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-stdio.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-tcp-telnet.cfg b/tests/xmconfigdata/test-fullvirt-serial-tcp-telnet.cfg
index 56eefac..2c0f166 100755
--- a/tests/xmconfigdata/test-fullvirt-serial-tcp-telnet.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-tcp-telnet.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-tcp.cfg b/tests/xmconfigdata/test-fullvirt-serial-tcp.cfg
index d569852..e90b375 100755
--- a/tests/xmconfigdata/test-fullvirt-serial-tcp.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-tcp.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-udp.cfg b/tests/xmconfigdata/test-fullvirt-serial-udp.cfg
index b1ef8f5..082215d 100755
--- a/tests/xmconfigdata/test-fullvirt-serial-udp.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-udp.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-serial-unix.cfg b/tests/xmconfigdata/test-fullvirt-serial-unix.cfg
index 30f0399..2912473 100755
--- a/tests/xmconfigdata/test-fullvirt-serial-unix.cfg
+++ b/tests/xmconfigdata/test-fullvirt-serial-unix.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-sound.cfg b/tests/xmconfigdata/test-fullvirt-sound.cfg
index c11336a..6747e69 100644
--- a/tests/xmconfigdata/test-fullvirt-sound.cfg
+++ b/tests/xmconfigdata/test-fullvirt-sound.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-usbmouse.cfg b/tests/xmconfigdata/test-fullvirt-usbmouse.cfg
index 33738ad..c7eb1c1 100755
--- a/tests/xmconfigdata/test-fullvirt-usbmouse.cfg
+++ b/tests/xmconfigdata/test-fullvirt-usbmouse.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-usbtablet.cfg b/tests/xmconfigdata/test-fullvirt-usbtablet.cfg
index 8e222bb..8921e7c 100755
--- a/tests/xmconfigdata/test-fullvirt-usbtablet.cfg
+++ b/tests/xmconfigdata/test-fullvirt-usbtablet.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-fullvirt-utc.cfg b/tests/xmconfigdata/test-fullvirt-utc.cfg
index 67e2511..5e12c5e 100755
--- a/tests/xmconfigdata/test-fullvirt-utc.cfg
+++ b/tests/xmconfigdata/test-fullvirt-utc.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-no-source-cdrom.cfg b/tests/xmconfigdata/test-no-source-cdrom.cfg
index 7098005..4240429 100644
--- a/tests/xmconfigdata/test-no-source-cdrom.cfg
+++ b/tests/xmconfigdata/test-no-source-cdrom.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigdata/test-pci-devs.cfg b/tests/xmconfigdata/test-pci-devs.cfg
index 777314f..1369b32 100644
--- a/tests/xmconfigdata/test-pci-devs.cfg
+++ b/tests/xmconfigdata/test-pci-devs.cfg
@@ -6,7 +6,6 @@ vcpus = 1
 pae = 1
 acpi = 1
 apic = 1
-hap = 0
 viridian = 0
 rtc_timeoffset = 0
 localtime = 0
diff --git a/tests/xmconfigtest.c b/tests/xmconfigtest.c
index a5c718b..9b21a13 100644
--- a/tests/xmconfigtest.c
+++ b/tests/xmconfigtest.c
@@ -235,6 +235,7 @@ mymain(void)
 
     DO_TEST("fullvirt-force-hpet");
     DO_TEST("fullvirt-force-nohpet");
+    DO_TEST("fullvirt-nohap");
 
     DO_TEST("fullvirt-parallel-tcp");
 
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH V2 3/4] Xen drivers: show hap enabled by default in capabilities
  2016-03-01  4:00 [PATCH V2 0/4] Extend <hap> to a tristate Jim Fehlig
  2016-03-01  4:00 ` [PATCH V2 1/4] conf: add 'state' attribute to <hap> feature Jim Fehlig
  2016-03-01  4:00 ` [PATCH V2 2/4] xenconfig: change 'hap' setting to align with Xen behavior Jim Fehlig
@ 2016-03-01  4:00 ` Jim Fehlig
  2016-03-08 16:37   ` [libvirt] " Joao Martins
  2016-03-01  4:00 ` [PATCH V2 4/4] libxl: support enabling and disabling <hap> feature Jim Fehlig
                   ` (3 subsequent siblings)
  6 siblings, 1 reply; 14+ messages in thread
From: Jim Fehlig @ 2016-03-01  4:00 UTC (permalink / raw)
  To: libvir-list; +Cc: Jim Fehlig, xen-devel

Hardware Assisted Paging is enabled by default in Xen. Change
the capabilities output to reflect this.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
---
 src/libxl/libxl_conf.c   | 2 +-
 src/xen/xen_hypervisor.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/libxl/libxl_conf.c b/src/libxl/libxl_conf.c
index 93c943b..6efd9b5 100644
--- a/src/libxl/libxl_conf.c
+++ b/src/libxl/libxl_conf.c
@@ -493,7 +493,7 @@ libxlCapsInitGuests(libxl_ctx *ctx, virCapsPtr caps)
 
             if (virCapabilitiesAddGuestFeature(guest,
                                                "hap",
-                                               0,
+                                               1,
                                                1) == NULL)
                 return -1;
         }
diff --git a/src/xen/xen_hypervisor.c b/src/xen/xen_hypervisor.c
index c1834cb..fc9e1c6 100644
--- a/src/xen/xen_hypervisor.c
+++ b/src/xen/xen_hypervisor.c
@@ -2206,7 +2206,7 @@ xenHypervisorBuildCapabilities(virConnectPtr conn, virArch hostarch,
             if ((hv_major == 3 && hv_minor >= 3) || (hv_major > 3))
                 if (virCapabilitiesAddGuestFeature(guest,
                                                    "hap",
-                                                   false,
+                                                   true,
                                                    true) == NULL)
                     goto no_memory;
 
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH V2 4/4] libxl: support enabling and disabling <hap> feature
  2016-03-01  4:00 [PATCH V2 0/4] Extend <hap> to a tristate Jim Fehlig
                   ` (2 preceding siblings ...)
  2016-03-01  4:00 ` [PATCH V2 3/4] Xen drivers: show hap enabled by default in capabilities Jim Fehlig
@ 2016-03-01  4:00 ` Jim Fehlig
  2016-03-08 16:37   ` [libvirt] " Joao Martins
  2016-03-08  4:02 ` [libvirt] [PATCH V2 0/4] Extend <hap> to a tristate Jim Fehlig
                   ` (2 subsequent siblings)
  6 siblings, 1 reply; 14+ messages in thread
From: Jim Fehlig @ 2016-03-01  4:00 UTC (permalink / raw)
  To: libvir-list; +Cc: Jim Fehlig, xen-devel

Until now, the libxl driver ignored any <hap> setting in domain XML
and deferred to libxl, which enables hap if not specified. While
this is a good default, it prevents disabling hap if desired.

This change allows disabling hap with <hap state='off'/>. hap is
explicitly enabled with <hap/> or <hap state='on/>. Absense of <hap>
retains current behavior of deferring default state to libxl.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
---
 src/libxl/libxl_conf.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/src/libxl/libxl_conf.c b/src/libxl/libxl_conf.c
index 6efd9b5..116dc22 100644
--- a/src/libxl/libxl_conf.c
+++ b/src/libxl/libxl_conf.c
@@ -511,10 +511,24 @@ libxlMakeDomCreateInfo(libxl_ctx *ctx,
 
     libxl_domain_create_info_init(c_info);
 
-    if (def->os.type == VIR_DOMAIN_OSTYPE_HVM)
+    if (def->os.type == VIR_DOMAIN_OSTYPE_HVM) {
         c_info->type = LIBXL_DOMAIN_TYPE_HVM;
-    else
+        switch ((virTristateSwitch) def->features[VIR_DOMAIN_FEATURE_HAP]) {
+        case VIR_TRISTATE_SWITCH_OFF:
+            libxl_defbool_set(&c_info->hap, false);
+            break;
+
+        case VIR_TRISTATE_SWITCH_ON:
+            libxl_defbool_set(&c_info->hap, true);
+            break;
+
+        case VIR_TRISTATE_SWITCH_ABSENT:
+        case VIR_TRISTATE_SWITCH_LAST:
+            break;
+        }
+    } else {
         c_info->type = LIBXL_DOMAIN_TYPE_PV;
+    }
 
     if (VIR_STRDUP(c_info->name, def->name) < 0)
         goto error;
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [libvirt] [PATCH V2 0/4] Extend <hap> to a tristate
  2016-03-01  4:00 [PATCH V2 0/4] Extend <hap> to a tristate Jim Fehlig
                   ` (3 preceding siblings ...)
  2016-03-01  4:00 ` [PATCH V2 4/4] libxl: support enabling and disabling <hap> feature Jim Fehlig
@ 2016-03-08  4:02 ` Jim Fehlig
       [not found] ` <56DE4ED8.4060905@suse.com>
  2016-03-21 12:49 ` Ján Tomko
  6 siblings, 0 replies; 14+ messages in thread
From: Jim Fehlig @ 2016-03-08  4:02 UTC (permalink / raw)
  To: libvir-list; +Cc: xen-devel

On 02/29/2016 09:00 PM, Jim Fehlig wrote:
> An expanded V2 of
>
> https://www.redhat.com/archives/libvir-list/2016-February/msg00140.html
>
> In V2, the <hap> feature is extended with a state='on|off' attribute to
> allow differentiating the 'on' and 'off' states with not set (or hypervisor
> default).

Any comments about this approach? I essentially followed the same pattern as the
<pvspinlock> and <vmport> hypervisor features.  Thanks!

Regards,
Jim

>
> Obviously post 1.3.2 material. See individual patches for details.
>
> Jim Fehlig (4):
>   conf: add 'state' attribute to <hap> feature
>   xenconfig: change 'hap' setting to align with Xen behavior
>   Xen drivers: show hap enabled by default in capabilities
>   libxl: support enabling and disabling <hap> feature
>
>  docs/formatdomain.html.in                          |  6 ++-
>  docs/schemas/domaincommon.rng                      |  6 ++-
>  src/conf/domain_conf.c                             |  4 +-
>  src/libxl/libxl_conf.c                             | 20 ++++++--
>  src/xen/xen_hypervisor.c                           |  2 +-
>  src/xenconfig/xen_common.c                         | 14 ++---
>  .../test-disk-positional-parms-full.cfg            |  1 -
>  .../test-disk-positional-parms-partial.cfg         |  1 -
>  ...est-fullvirt-direct-kernel-boot-bogus-extra.cfg |  1 -
>  .../test-fullvirt-direct-kernel-boot-extra.cfg     |  1 -
>  .../test-fullvirt-direct-kernel-boot.cfg           |  1 -
>  tests/xlconfigdata/test-fullvirt-multiusb.cfg      |  1 -
>  tests/xlconfigdata/test-fullvirt-nohap.cfg         | 26 ++++++++++
>  tests/xlconfigdata/test-fullvirt-nohap.xml         | 59 ++++++++++++++++++++++
>  tests/xlconfigdata/test-new-disk.cfg               |  1 -
>  tests/xlconfigdata/test-rbd-multihost-noauth.cfg   |  1 -
>  tests/xlconfigdata/test-spice-features.cfg         |  1 -
>  tests/xlconfigdata/test-spice.cfg                  |  1 -
>  tests/xlconfigdata/test-vif-rate.cfg               |  1 -
>  tests/xlconfigtest.c                               |  1 +
>  tests/xmconfigdata/test-escape-paths.cfg           |  1 -
>  .../xmconfigdata/test-fullvirt-default-feature.cfg |  1 -
>  tests/xmconfigdata/test-fullvirt-force-hpet.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-force-nohpet.cfg  |  1 -
>  tests/xmconfigdata/test-fullvirt-localtime.cfg     |  1 -
>  tests/xmconfigdata/test-fullvirt-net-netfront.cfg  |  1 -
>  tests/xmconfigdata/test-fullvirt-new-cdrom.cfg     |  1 -
>  tests/xmconfigdata/test-fullvirt-nohap.cfg         | 28 ++++++++++
>  tests/xmconfigdata/test-fullvirt-nohap.xml         | 51 +++++++++++++++++++
>  tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg  |  1 -
>  .../test-fullvirt-serial-dev-2-ports.cfg           |  1 -
>  .../test-fullvirt-serial-dev-2nd-port.cfg          |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-file.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-null.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-pipe.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-pty.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-stdio.cfg  |  1 -
>  .../test-fullvirt-serial-tcp-telnet.cfg            |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-tcp.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-udp.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-unix.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-sound.cfg         |  1 -
>  tests/xmconfigdata/test-fullvirt-usbmouse.cfg      |  1 -
>  tests/xmconfigdata/test-fullvirt-usbtablet.cfg     |  1 -
>  tests/xmconfigdata/test-fullvirt-utc.cfg           |  1 -
>  tests/xmconfigdata/test-no-source-cdrom.cfg        |  1 -
>  tests/xmconfigdata/test-pci-devs.cfg               |  1 -
>  tests/xmconfigtest.c                               |  1 +
>  48 files changed, 202 insertions(+), 52 deletions(-)
>  create mode 100644 tests/xlconfigdata/test-fullvirt-nohap.cfg
>  create mode 100644 tests/xlconfigdata/test-fullvirt-nohap.xml
>  create mode 100755 tests/xmconfigdata/test-fullvirt-nohap.cfg
>  create mode 100644 tests/xmconfigdata/test-fullvirt-nohap.xml
>


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [libvirt] [PATCH V2 1/4] conf: add 'state' attribute to <hap> feature
  2016-03-01  4:00 ` [PATCH V2 1/4] conf: add 'state' attribute to <hap> feature Jim Fehlig
@ 2016-03-08 16:37   ` Joao Martins
  2016-03-08 20:21     ` Jim Fehlig
  0 siblings, 1 reply; 14+ messages in thread
From: Joao Martins @ 2016-03-08 16:37 UTC (permalink / raw)
  To: Jim Fehlig; +Cc: libvir-list, xen-devel



On 03/01/2016 04:00 AM, Jim Fehlig wrote:
> Most hypervisors use Hardware Assisted Paging by default and don't
> require specifying the feature in domain conf. But some hypervisors
> support disabling HAP on a per-domain basis. To enable HAP by default
> yet provide a knob to disable it, extend the <hap> feature with a
> 'state=on|off' attribute, similar to <pvspinlock> and <vmport> features.
> 
> In the absence of <hap>, the hypervisor default (on) is used. <hap>
> without the state attribute would be the same as <hap state='on'/> for
> backwards compatibility. And of course <hap state='off'/> disables hap.
> 
> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
> ---
>  docs/formatdomain.html.in     | 6 ++++--
>  docs/schemas/domaincommon.rng | 6 +++++-
>  src/conf/domain_conf.c        | 4 ++--
>  3 files changed, 11 insertions(+), 5 deletions(-)
> 
> diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
> index 5016772..c06bcf3 100644
> --- a/docs/formatdomain.html.in
> +++ b/docs/formatdomain.html.in
> @@ -1494,8 +1494,10 @@
>        Interrupt) for the guest.
>        </dd>
>        <dt><code>hap</code></dt>
> -      <dd>Enable use of Hardware Assisted Paging if available in
> -        the hardware.
> +      <dd>Depending on the <code>state</code> attribute (values <code>on</code>,
> +        <code>off</code>) enable or disable use of Hardware Assisted Paging.
> +        The default is <code>on</code> if the hypervisor detects availability
> +        of Hardware Assisted Paging.
>        </dd>
>        <dt><code>viridian</code></dt>
>        <dd>Enable Viridian hypervisor extensions for paravirtualizing
> diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
> index 67af93a..dd6e93a 100644
> --- a/docs/schemas/domaincommon.rng
> +++ b/docs/schemas/domaincommon.rng
> @@ -4108,7 +4108,11 @@
>            </optional>
>            <optional>
>              <element name="hap">
> -              <empty/>
> +              <optional>
> +                <attribute name="state">
> +                  <ref name="virOnOff"/>
> +                </attribute>
> +              </optional>
Perhaps <ref name="featurestate"/> would be better (see chunk below) ? That one
appears to be a reference of what you are adding above, and it's the same as
pvspinlock. Though some other elements don't appear to use this, not sure why.

diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index 89d3a6b..141122c 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -4132,9 +4132,7 @@
           <optional>
             <element name="hap">
               <optional>
-                <attribute name="state">
-                  <ref name="virOnOff"/>
-                </attribute>
+                <ref name="featurestate"/>
               </optional>
             </element>
           </optional>

Other that,

Reviewed-by: Joao Martins <joao.m.martins@oracle.com>

>              </element>
>            </optional>
>            <optional>
> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
> index 79758d4..714bbfc 100644
> --- a/src/conf/domain_conf.c
> +++ b/src/conf/domain_conf.c
> @@ -15296,7 +15296,6 @@ virDomainDefParseXML(xmlDocPtr xml,
>              /* fallthrough */
>          case VIR_DOMAIN_FEATURE_ACPI:
>          case VIR_DOMAIN_FEATURE_PAE:
> -        case VIR_DOMAIN_FEATURE_HAP:
>          case VIR_DOMAIN_FEATURE_VIRIDIAN:
>          case VIR_DOMAIN_FEATURE_PRIVNET:
>          case VIR_DOMAIN_FEATURE_HYPERV:
> @@ -15321,6 +15320,7 @@ virDomainDefParseXML(xmlDocPtr xml,
>              ctxt->node = node;
>              break;
>  
> +        case VIR_DOMAIN_FEATURE_HAP:
>          case VIR_DOMAIN_FEATURE_PMU:
>          case VIR_DOMAIN_FEATURE_PVSPINLOCK:
>          case VIR_DOMAIN_FEATURE_VMPORT:
> @@ -22043,7 +22043,6 @@ virDomainDefFormatInternal(virDomainDefPtr def,
>              switch ((virDomainFeature) i) {
>              case VIR_DOMAIN_FEATURE_ACPI:
>              case VIR_DOMAIN_FEATURE_PAE:
> -            case VIR_DOMAIN_FEATURE_HAP:
>              case VIR_DOMAIN_FEATURE_VIRIDIAN:
>              case VIR_DOMAIN_FEATURE_PRIVNET:
>                  switch ((virTristateSwitch) def->features[i]) {
> @@ -22065,6 +22064,7 @@ virDomainDefFormatInternal(virDomainDefPtr def,
>  
>                  break;
>  
> +            case VIR_DOMAIN_FEATURE_HAP:
>              case VIR_DOMAIN_FEATURE_PMU:
>              case VIR_DOMAIN_FEATURE_PVSPINLOCK:
>              case VIR_DOMAIN_FEATURE_VMPORT:
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [libvirt] [PATCH V2 2/4] xenconfig: change 'hap' setting to align with Xen behavior
  2016-03-01  4:00 ` [PATCH V2 2/4] xenconfig: change 'hap' setting to align with Xen behavior Jim Fehlig
@ 2016-03-08 16:37   ` Joao Martins
  0 siblings, 0 replies; 14+ messages in thread
From: Joao Martins @ 2016-03-08 16:37 UTC (permalink / raw)
  To: Jim Fehlig; +Cc: libvir-list, xen-devel



On 03/01/2016 04:00 AM, Jim Fehlig wrote:
> hap is enabled by default in xm and xl config and usually only
> specified when it is desirable to disable hap (hap = 0). Change
> the xm,xl <-> xml converter to behave similarly. I.e. only
> produce 'hap = 0' when <hap state='off'/> and vice versa.
> 
> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
> ---
>  src/xenconfig/xen_common.c                         | 14 ++---
>  .../test-disk-positional-parms-full.cfg            |  1 -
>  .../test-disk-positional-parms-partial.cfg         |  1 -
>  ...est-fullvirt-direct-kernel-boot-bogus-extra.cfg |  1 -
>  .../test-fullvirt-direct-kernel-boot-extra.cfg     |  1 -
>  .../test-fullvirt-direct-kernel-boot.cfg           |  1 -
>  tests/xlconfigdata/test-fullvirt-multiusb.cfg      |  1 -
>  tests/xlconfigdata/test-fullvirt-nohap.cfg         | 26 ++++++++++
>  tests/xlconfigdata/test-fullvirt-nohap.xml         | 59 ++++++++++++++++++++++
>  tests/xlconfigdata/test-new-disk.cfg               |  1 -
>  tests/xlconfigdata/test-rbd-multihost-noauth.cfg   |  1 -
>  tests/xlconfigdata/test-spice-features.cfg         |  1 -
>  tests/xlconfigdata/test-spice.cfg                  |  1 -
>  tests/xlconfigdata/test-vif-rate.cfg               |  1 -
>  tests/xlconfigtest.c                               |  1 +
>  tests/xmconfigdata/test-escape-paths.cfg           |  1 -
>  .../xmconfigdata/test-fullvirt-default-feature.cfg |  1 -
>  tests/xmconfigdata/test-fullvirt-force-hpet.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-force-nohpet.cfg  |  1 -
>  tests/xmconfigdata/test-fullvirt-localtime.cfg     |  1 -
>  tests/xmconfigdata/test-fullvirt-net-netfront.cfg  |  1 -
>  tests/xmconfigdata/test-fullvirt-new-cdrom.cfg     |  1 -
>  tests/xmconfigdata/test-fullvirt-nohap.cfg         | 28 ++++++++++
>  tests/xmconfigdata/test-fullvirt-nohap.xml         | 51 +++++++++++++++++++
>  tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg  |  1 -
>  .../test-fullvirt-serial-dev-2-ports.cfg           |  1 -
>  .../test-fullvirt-serial-dev-2nd-port.cfg          |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-file.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-null.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-pipe.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-pty.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-stdio.cfg  |  1 -
>  .../test-fullvirt-serial-tcp-telnet.cfg            |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-tcp.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-udp.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-unix.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-sound.cfg         |  1 -
>  tests/xmconfigdata/test-fullvirt-usbmouse.cfg      |  1 -
>  tests/xmconfigdata/test-fullvirt-usbtablet.cfg     |  1 -
>  tests/xmconfigdata/test-fullvirt-utc.cfg           |  1 -
>  tests/xmconfigdata/test-no-source-cdrom.cfg        |  1 -
>  tests/xmconfigdata/test-pci-devs.cfg               |  1 -
>  tests/xmconfigtest.c                               |  1 +
>  43 files changed, 173 insertions(+), 43 deletions(-)
> 
> diff --git a/src/xenconfig/xen_common.c b/src/xenconfig/xen_common.c
> index 828c8e9..4dcd484 100644
> --- a/src/xenconfig/xen_common.c
> +++ b/src/xenconfig/xen_common.c
> @@ -528,11 +528,11 @@ xenParseCPUFeatures(virConfPtr conf, virDomainDefPtr def)
>  
>          else if (val)
>              def->features[VIR_DOMAIN_FEATURE_APIC] = VIR_TRISTATE_SWITCH_ON;
> -        if (xenConfigGetBool(conf, "hap", &val, 0) < 0)
> +        if (xenConfigGetBool(conf, "hap", &val, 1) < 0)
>              return -1;
>  
> -        else if (val)
> -            def->features[VIR_DOMAIN_FEATURE_HAP] = VIR_TRISTATE_SWITCH_ON;
> +        else if (!val)
> +            def->features[VIR_DOMAIN_FEATURE_HAP] = VIR_TRISTATE_SWITCH_OFF;
>          if (xenConfigGetBool(conf, "viridian", &val, 0) < 0)
>              return -1;
>  
> @@ -1572,10 +1572,10 @@ xenFormatCPUFeatures(virConfPtr conf, virDomainDefPtr def)
>                              VIR_TRISTATE_SWITCH_ON) ? 1 : 0) < 0)
>              return -1;
>  
> -        if (xenConfigSetInt(conf, "hap",
> -                            (def->features[VIR_DOMAIN_FEATURE_HAP] ==
> -                             VIR_TRISTATE_SWITCH_ON) ? 1 : 0) < 0)
> -            return -1;
> +        if (def->features[VIR_DOMAIN_FEATURE_HAP] == VIR_TRISTATE_SWITCH_OFF) {
> +            if (xenConfigSetInt(conf, "hap", 0) < 0)
> +                return -1;
> +        }
>  
>          if (xenConfigSetInt(conf, "viridian",
>                              (def->features[VIR_DOMAIN_FEATURE_VIRIDIAN] ==
> diff --git a/tests/xlconfigdata/test-disk-positional-parms-full.cfg b/tests/xlconfigdata/test-disk-positional-parms-full.cfg
> index 026e451..c5bbb03 100644
> --- a/tests/xlconfigdata/test-disk-positional-parms-full.cfg
> +++ b/tests/xlconfigdata/test-disk-positional-parms-full.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigdata/test-disk-positional-parms-partial.cfg b/tests/xlconfigdata/test-disk-positional-parms-partial.cfg
> index 0591037..09eeb94 100644
> --- a/tests/xlconfigdata/test-disk-positional-parms-partial.cfg
> +++ b/tests/xlconfigdata/test-disk-positional-parms-partial.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-bogus-extra.cfg b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-bogus-extra.cfg
> index 83ab975..8012737 100644
> --- a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-bogus-extra.cfg
> +++ b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-bogus-extra.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-extra.cfg b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-extra.cfg
> index f452af6..4ed5a90 100644
> --- a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-extra.cfg
> +++ b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot-extra.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot.cfg b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot.cfg
> index 9ebbc89..110f0a0 100644
> --- a/tests/xlconfigdata/test-fullvirt-direct-kernel-boot.cfg
> +++ b/tests/xlconfigdata/test-fullvirt-direct-kernel-boot.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigdata/test-fullvirt-multiusb.cfg b/tests/xlconfigdata/test-fullvirt-multiusb.cfg
> index 097de88..003eb2b 100755
> --- a/tests/xlconfigdata/test-fullvirt-multiusb.cfg
> +++ b/tests/xlconfigdata/test-fullvirt-multiusb.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigdata/test-fullvirt-nohap.cfg b/tests/xlconfigdata/test-fullvirt-nohap.cfg
> new file mode 100644
> index 0000000..44bfa3c
> --- /dev/null
> +++ b/tests/xlconfigdata/test-fullvirt-nohap.cfg
> @@ -0,0 +1,26 @@
> +name = "XenGuest2"
> +uuid = "c7a5fdb2-cdaf-9455-926a-d65c16db1809"
> +maxmem = 579
> +memory = 394
> +vcpus = 1
> +pae = 1
> +acpi = 1
> +apic = 1
> +hap = 0
> +viridian = 0
> +rtc_timeoffset = 0
> +localtime = 0
> +on_poweroff = "destroy"
> +on_reboot = "restart"
> +on_crash = "restart"
> +device_model = "/usr/lib/xen/bin/qemu-dm"
> +sdl = 0
> +vnc = 1
> +vncunused = 1
> +vnclisten = "127.0.0.1"
> +vif = [ "mac=00:16:3e:66:92:9c,bridge=xenbr1,script=vif-bridge,model=e1000,rate=10240KB/s" ]
> +parallel = "none"
> +serial = "none"
> +builder = "hvm"
> +boot = "d"
> +disk = [ "format=raw,vdev=hda,access=rw,backendtype=phy,target=/dev/HostVG/XenGuest2", "format=qcow2,vdev=hdb,access=rw,backendtype=qdisk,target=/var/lib/libvirt/images/XenGuest2-home", "format=raw,vdev=hdc,access=ro,backendtype=qdisk,devtype=cdrom,target=/root/boot.iso" ]
> diff --git a/tests/xlconfigdata/test-fullvirt-nohap.xml b/tests/xlconfigdata/test-fullvirt-nohap.xml
> new file mode 100644
> index 0000000..d9dad20
> --- /dev/null
> +++ b/tests/xlconfigdata/test-fullvirt-nohap.xml
> @@ -0,0 +1,59 @@
> +<domain type='xen'>
> +  <name>XenGuest2</name>
> +  <uuid>c7a5fdb2-cdaf-9455-926a-d65c16db1809</uuid>
> +  <memory unit='KiB'>592896</memory>
> +  <currentMemory unit='KiB'>403456</currentMemory>
> +  <vcpu placement='static'>1</vcpu>
> +  <os>
> +    <type arch='x86_64' machine='xenfv'>hvm</type>
> +    <loader type='rom'>/usr/lib/xen/boot/hvmloader</loader>
> +    <boot dev='cdrom'/>
> +  </os>
> +  <features>
> +    <acpi/>
> +    <apic/>
> +    <pae/>
> +    <hap state='off'/>
> +  </features>
> +  <clock offset='variable' adjustment='0' basis='utc'/>
> +  <on_poweroff>destroy</on_poweroff>
> +  <on_reboot>restart</on_reboot>
> +  <on_crash>restart</on_crash>
> +  <devices>
> +    <emulator>/usr/lib/xen/bin/qemu-dm</emulator>
> +    <disk type='block' device='disk'>
> +      <driver name='phy' type='raw'/>
> +      <source dev='/dev/HostVG/XenGuest2'/>
> +      <target dev='hda' bus='ide'/>
> +      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
> +    </disk>
> +    <disk type='file' device='disk'>
> +      <driver name='qemu' type='qcow2'/>
> +      <source file='/var/lib/libvirt/images/XenGuest2-home'/>
> +      <target dev='hdb' bus='ide'/>
> +      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
> +    </disk>
> +    <disk type='file' device='cdrom'>
> +      <driver name='qemu' type='raw'/>
> +      <source file='/root/boot.iso'/>
> +      <target dev='hdc' bus='ide'/>
> +      <readonly/>
> +      <address type='drive' controller='0' bus='1' target='0' unit='0'/>
> +    </disk>
> +    <controller type='ide' index='0'/>
> +    <interface type='bridge'>
> +      <mac address='00:16:3e:66:92:9c'/>
> +      <source bridge='xenbr1'/>
> +      <bandwidth>
> +        <outbound average='10240'/>
> +      </bandwidth>
> +      <script path='vif-bridge'/>
> +      <model type='e1000'/>
> +    </interface>
> +    <input type='mouse' bus='ps2'/>
> +    <input type='keyboard' bus='ps2'/>
> +    <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
> +      <listen type='address' address='127.0.0.1'/>
> +    </graphics>
> +  </devices>
> +</domain>
> diff --git a/tests/xlconfigdata/test-new-disk.cfg b/tests/xlconfigdata/test-new-disk.cfg
> index 4a5b66e..b079056 100644
> --- a/tests/xlconfigdata/test-new-disk.cfg
> +++ b/tests/xlconfigdata/test-new-disk.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigdata/test-rbd-multihost-noauth.cfg b/tests/xlconfigdata/test-rbd-multihost-noauth.cfg
> index cfe00e5..99f0889 100644
> --- a/tests/xlconfigdata/test-rbd-multihost-noauth.cfg
> +++ b/tests/xlconfigdata/test-rbd-multihost-noauth.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigdata/test-spice-features.cfg b/tests/xlconfigdata/test-spice-features.cfg
> index 8c1ca18..48dcd86 100644
> --- a/tests/xlconfigdata/test-spice-features.cfg
> +++ b/tests/xlconfigdata/test-spice-features.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigdata/test-spice.cfg b/tests/xlconfigdata/test-spice.cfg
> index 84b3ae6..7ab23e1 100644
> --- a/tests/xlconfigdata/test-spice.cfg
> +++ b/tests/xlconfigdata/test-spice.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigdata/test-vif-rate.cfg b/tests/xlconfigdata/test-vif-rate.cfg
> index 44bfa3c..db932e5 100644
> --- a/tests/xlconfigdata/test-vif-rate.cfg
> +++ b/tests/xlconfigdata/test-vif-rate.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xlconfigtest.c b/tests/xlconfigtest.c
> index 2668a76..ba1bed0 100644
> --- a/tests/xlconfigtest.c
> +++ b/tests/xlconfigtest.c
> @@ -213,6 +213,7 @@ mymain(void)
>      DO_TEST("spice");
>      DO_TEST("spice-features");
>      DO_TEST("vif-rate");
> +    DO_TEST("fullvirt-nohap");
>  
>      DO_TEST("paravirt-cmdline");
>      DO_TEST_FORMAT("paravirt-cmdline-extra-root");
> diff --git a/tests/xmconfigdata/test-escape-paths.cfg b/tests/xmconfigdata/test-escape-paths.cfg
> index 98570bd..f13254e 100644
> --- a/tests/xmconfigdata/test-escape-paths.cfg
> +++ b/tests/xmconfigdata/test-escape-paths.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-default-feature.cfg b/tests/xmconfigdata/test-fullvirt-default-feature.cfg
> index c9d072d..f72575b 100644
> --- a/tests/xmconfigdata/test-fullvirt-default-feature.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-default-feature.cfg
> @@ -7,7 +7,6 @@ builder = "hvm"
>  kernel = "/usr/lib/xen/boot/hvmloader"
>  boot = "d"
>  hpet = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-force-hpet.cfg b/tests/xmconfigdata/test-fullvirt-force-hpet.cfg
> index b89ed42..d73b4e9 100644
> --- a/tests/xmconfigdata/test-fullvirt-force-hpet.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-force-hpet.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  hpet = 1
>  rtc_timeoffset = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-force-nohpet.cfg b/tests/xmconfigdata/test-fullvirt-force-nohpet.cfg
> index 99e6d38..d670d36 100644
> --- a/tests/xmconfigdata/test-fullvirt-force-nohpet.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-force-nohpet.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  hpet = 0
>  rtc_timeoffset = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-localtime.cfg b/tests/xmconfigdata/test-fullvirt-localtime.cfg
> index 5d07423..d51be21 100755
> --- a/tests/xmconfigdata/test-fullvirt-localtime.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-localtime.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 1
> diff --git a/tests/xmconfigdata/test-fullvirt-net-netfront.cfg b/tests/xmconfigdata/test-fullvirt-net-netfront.cfg
> index da1d368..254bd93 100644
> --- a/tests/xmconfigdata/test-fullvirt-net-netfront.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-net-netfront.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-new-cdrom.cfg b/tests/xmconfigdata/test-fullvirt-new-cdrom.cfg
> index 67e2511..5e12c5e 100755
> --- a/tests/xmconfigdata/test-fullvirt-new-cdrom.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-new-cdrom.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-nohap.cfg b/tests/xmconfigdata/test-fullvirt-nohap.cfg
> new file mode 100755
> index 0000000..67e2511
> --- /dev/null
> +++ b/tests/xmconfigdata/test-fullvirt-nohap.cfg
> @@ -0,0 +1,28 @@
> +name = "XenGuest2"
> +uuid = "c7a5fdb2-cdaf-9455-926a-d65c16db1809"
> +maxmem = 579
> +memory = 394
> +vcpus = 1
> +pae = 1
> +acpi = 1
> +apic = 1
> +hap = 0
> +viridian = 0
> +rtc_timeoffset = 0
> +localtime = 0
> +on_poweroff = "destroy"
> +on_reboot = "restart"
> +on_crash = "restart"
> +device_model = "/usr/lib/xen/bin/qemu-dm"
> +sdl = 0
> +vnc = 1
> +vncunused = 1
> +vnclisten = "127.0.0.1"
> +vncpasswd = "123poi"
> +vif = [ "mac=00:16:3e:66:92:9c,bridge=xenbr1,script=vif-bridge,model=e1000" ]
> +parallel = "none"
> +serial = "none"
> +builder = "hvm"
> +kernel = "/usr/lib/xen/boot/hvmloader"
> +boot = "d"
> +disk = [ "phy:/dev/HostVG/XenGuest2,hda,w", "file:/root/boot.iso,hdc:cdrom,r" ]
> diff --git a/tests/xmconfigdata/test-fullvirt-nohap.xml b/tests/xmconfigdata/test-fullvirt-nohap.xml
> new file mode 100644
> index 0000000..671c71b
> --- /dev/null
> +++ b/tests/xmconfigdata/test-fullvirt-nohap.xml
> @@ -0,0 +1,51 @@
> +<domain type='xen'>
> +  <name>XenGuest2</name>
> +  <uuid>c7a5fdb2-cdaf-9455-926a-d65c16db1809</uuid>
> +  <memory unit='KiB'>592896</memory>
> +  <currentMemory unit='KiB'>403456</currentMemory>
> +  <vcpu placement='static'>1</vcpu>
> +  <os>
> +    <type arch='i686' machine='xenfv'>hvm</type>
> +    <loader type='rom'>/usr/lib/xen/boot/hvmloader</loader>
> +    <boot dev='cdrom'/>
> +  </os>
> +  <features>
> +    <acpi/>
> +    <apic/>
> +    <pae/>
> +    <hap state='off'/>
> +  </features>
> +  <clock offset='variable' adjustment='0' basis='utc'/>
> +  <on_poweroff>destroy</on_poweroff>
> +  <on_reboot>restart</on_reboot>
> +  <on_crash>restart</on_crash>
> +  <devices>
> +    <emulator>/usr/lib/xen/bin/qemu-dm</emulator>
> +    <disk type='block' device='disk'>
> +      <driver name='phy'/>
> +      <source dev='/dev/HostVG/XenGuest2'/>
> +      <target dev='hda' bus='ide'/>
> +      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
> +    </disk>
> +    <disk type='file' device='cdrom'>
> +      <driver name='file'/>
> +      <source file='/root/boot.iso'/>
> +      <target dev='hdc' bus='ide'/>
> +      <readonly/>
> +      <address type='drive' controller='0' bus='1' target='0' unit='0'/>
> +    </disk>
> +    <controller type='ide' index='0'/>
> +    <interface type='bridge'>
> +      <mac address='00:16:3e:66:92:9c'/>
> +      <source bridge='xenbr1'/>
> +      <script path='vif-bridge'/>
> +      <model type='e1000'/>
> +    </interface>
> +    <input type='mouse' bus='ps2'/>
> +    <input type='keyboard' bus='ps2'/>
> +    <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1' passwd='123poi'>
> +      <listen type='address' address='127.0.0.1'/>
> +    </graphics>
> +    <memballoon model='xen'/>
> +  </devices>
> +</domain>
> diff --git a/tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg b/tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg
> index 1bbce56..df7b621 100755
> --- a/tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg b/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg
> index c722792..f4963e1 100644
> --- a/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-dev-2-ports.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-dev-2nd-port.cfg b/tests/xmconfigdata/test-fullvirt-serial-dev-2nd-port.cfg
> index 4baffe6..2dc3258 100644
> --- a/tests/xmconfigdata/test-fullvirt-serial-dev-2nd-port.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-dev-2nd-port.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-file.cfg b/tests/xmconfigdata/test-fullvirt-serial-file.cfg
> index 3d26e26..d5bd759 100755
> --- a/tests/xmconfigdata/test-fullvirt-serial-file.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-file.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-null.cfg b/tests/xmconfigdata/test-fullvirt-serial-null.cfg
> index 6b0f2a4..d38f084 100755
> --- a/tests/xmconfigdata/test-fullvirt-serial-null.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-null.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-pipe.cfg b/tests/xmconfigdata/test-fullvirt-serial-pipe.cfg
> index 2bd8377..9ed3fb7 100755
> --- a/tests/xmconfigdata/test-fullvirt-serial-pipe.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-pipe.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-pty.cfg b/tests/xmconfigdata/test-fullvirt-serial-pty.cfg
> index 022f975..b055f79 100755
> --- a/tests/xmconfigdata/test-fullvirt-serial-pty.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-pty.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-stdio.cfg b/tests/xmconfigdata/test-fullvirt-serial-stdio.cfg
> index c339a94..5fb13cd 100755
> --- a/tests/xmconfigdata/test-fullvirt-serial-stdio.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-stdio.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-tcp-telnet.cfg b/tests/xmconfigdata/test-fullvirt-serial-tcp-telnet.cfg
> index 56eefac..2c0f166 100755
> --- a/tests/xmconfigdata/test-fullvirt-serial-tcp-telnet.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-tcp-telnet.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-tcp.cfg b/tests/xmconfigdata/test-fullvirt-serial-tcp.cfg
> index d569852..e90b375 100755
> --- a/tests/xmconfigdata/test-fullvirt-serial-tcp.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-tcp.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-udp.cfg b/tests/xmconfigdata/test-fullvirt-serial-udp.cfg
> index b1ef8f5..082215d 100755
> --- a/tests/xmconfigdata/test-fullvirt-serial-udp.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-udp.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-serial-unix.cfg b/tests/xmconfigdata/test-fullvirt-serial-unix.cfg
> index 30f0399..2912473 100755
> --- a/tests/xmconfigdata/test-fullvirt-serial-unix.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-serial-unix.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-sound.cfg b/tests/xmconfigdata/test-fullvirt-sound.cfg
> index c11336a..6747e69 100644
> --- a/tests/xmconfigdata/test-fullvirt-sound.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-sound.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-usbmouse.cfg b/tests/xmconfigdata/test-fullvirt-usbmouse.cfg
> index 33738ad..c7eb1c1 100755
> --- a/tests/xmconfigdata/test-fullvirt-usbmouse.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-usbmouse.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-usbtablet.cfg b/tests/xmconfigdata/test-fullvirt-usbtablet.cfg
> index 8e222bb..8921e7c 100755
> --- a/tests/xmconfigdata/test-fullvirt-usbtablet.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-usbtablet.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-fullvirt-utc.cfg b/tests/xmconfigdata/test-fullvirt-utc.cfg
> index 67e2511..5e12c5e 100755
> --- a/tests/xmconfigdata/test-fullvirt-utc.cfg
> +++ b/tests/xmconfigdata/test-fullvirt-utc.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-no-source-cdrom.cfg b/tests/xmconfigdata/test-no-source-cdrom.cfg
> index 7098005..4240429 100644
> --- a/tests/xmconfigdata/test-no-source-cdrom.cfg
> +++ b/tests/xmconfigdata/test-no-source-cdrom.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigdata/test-pci-devs.cfg b/tests/xmconfigdata/test-pci-devs.cfg
> index 777314f..1369b32 100644
> --- a/tests/xmconfigdata/test-pci-devs.cfg
> +++ b/tests/xmconfigdata/test-pci-devs.cfg
> @@ -6,7 +6,6 @@ vcpus = 1
>  pae = 1
>  acpi = 1
>  apic = 1
> -hap = 0
>  viridian = 0
>  rtc_timeoffset = 0
>  localtime = 0
> diff --git a/tests/xmconfigtest.c b/tests/xmconfigtest.c
> index a5c718b..9b21a13 100644
> --- a/tests/xmconfigtest.c
> +++ b/tests/xmconfigtest.c
> @@ -235,6 +235,7 @@ mymain(void)
>  
>      DO_TEST("fullvirt-force-hpet");
>      DO_TEST("fullvirt-force-nohpet");
> +    DO_TEST("fullvirt-nohap");
>  
>      DO_TEST("fullvirt-parallel-tcp");
>  
> 
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [libvirt] [PATCH V2 3/4] Xen drivers: show hap enabled by default in capabilities
  2016-03-01  4:00 ` [PATCH V2 3/4] Xen drivers: show hap enabled by default in capabilities Jim Fehlig
@ 2016-03-08 16:37   ` Joao Martins
  0 siblings, 0 replies; 14+ messages in thread
From: Joao Martins @ 2016-03-08 16:37 UTC (permalink / raw)
  To: Jim Fehlig, libvir-list; +Cc: xen-devel



On 03/01/2016 04:00 AM, Jim Fehlig wrote:
> Hardware Assisted Paging is enabled by default in Xen. Change
> the capabilities output to reflect this.
> 
> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
> ---
>  src/libxl/libxl_conf.c   | 2 +-
>  src/xen/xen_hypervisor.c | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/src/libxl/libxl_conf.c b/src/libxl/libxl_conf.c
> index 93c943b..6efd9b5 100644
> --- a/src/libxl/libxl_conf.c
> +++ b/src/libxl/libxl_conf.c
> @@ -493,7 +493,7 @@ libxlCapsInitGuests(libxl_ctx *ctx, virCapsPtr caps)
>  
>              if (virCapabilitiesAddGuestFeature(guest,
>                                                 "hap",
> -                                               0,
> +                                               1,
>                                                 1) == NULL)
>                  return -1;
>          }
> diff --git a/src/xen/xen_hypervisor.c b/src/xen/xen_hypervisor.c
> index c1834cb..fc9e1c6 100644
> --- a/src/xen/xen_hypervisor.c
> +++ b/src/xen/xen_hypervisor.c
> @@ -2206,7 +2206,7 @@ xenHypervisorBuildCapabilities(virConnectPtr conn, virArch hostarch,
>              if ((hv_major == 3 && hv_minor >= 3) || (hv_major > 3))
>                  if (virCapabilitiesAddGuestFeature(guest,
>                                                     "hap",
> -                                                   false,
> +                                                   true,
>                                                     true) == NULL)
>                      goto no_memory;
>  
> 

For the libxl part,

Reviewed-by: Joao Martins <joao.m.martins@oracle.com>

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [libvirt] [PATCH V2 4/4] libxl: support enabling and disabling <hap> feature
  2016-03-01  4:00 ` [PATCH V2 4/4] libxl: support enabling and disabling <hap> feature Jim Fehlig
@ 2016-03-08 16:37   ` Joao Martins
  0 siblings, 0 replies; 14+ messages in thread
From: Joao Martins @ 2016-03-08 16:37 UTC (permalink / raw)
  To: Jim Fehlig; +Cc: libvir-list, xen-devel



On 03/01/2016 04:00 AM, Jim Fehlig wrote:
> Until now, the libxl driver ignored any <hap> setting in domain XML
> and deferred to libxl, which enables hap if not specified. While
> this is a good default, it prevents disabling hap if desired.
> 
> This change allows disabling hap with <hap state='off'/>. hap is
> explicitly enabled with <hap/> or <hap state='on/>. Absense of <hap>
> retains current behavior of deferring default state to libxl.
> 
> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
> ---
>  src/libxl/libxl_conf.c | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/src/libxl/libxl_conf.c b/src/libxl/libxl_conf.c
> index 6efd9b5..116dc22 100644
> --- a/src/libxl/libxl_conf.c
> +++ b/src/libxl/libxl_conf.c
> @@ -511,10 +511,24 @@ libxlMakeDomCreateInfo(libxl_ctx *ctx,
>  
>      libxl_domain_create_info_init(c_info);
>  
> -    if (def->os.type == VIR_DOMAIN_OSTYPE_HVM)
> +    if (def->os.type == VIR_DOMAIN_OSTYPE_HVM) {
>          c_info->type = LIBXL_DOMAIN_TYPE_HVM;
> -    else
> +        switch ((virTristateSwitch) def->features[VIR_DOMAIN_FEATURE_HAP]) {
> +        case VIR_TRISTATE_SWITCH_OFF:
> +            libxl_defbool_set(&c_info->hap, false);
> +            break;
> +
> +        case VIR_TRISTATE_SWITCH_ON:
> +            libxl_defbool_set(&c_info->hap, true);
> +            break;
> +
> +        case VIR_TRISTATE_SWITCH_ABSENT:
> +        case VIR_TRISTATE_SWITCH_LAST:
> +            break;
> +        }
> +    } else {
>          c_info->type = LIBXL_DOMAIN_TYPE_PV;
> +    }
>  
>      if (VIR_STRDUP(c_info->name, def->name) < 0)
>          goto error;
> 
Tested and Reviewed-by: Joao Martins <joao.m.martins@oracle.com>

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [libvirt] [PATCH V2 1/4] conf: add 'state' attribute to <hap> feature
  2016-03-08 16:37   ` [libvirt] " Joao Martins
@ 2016-03-08 20:21     ` Jim Fehlig
  0 siblings, 0 replies; 14+ messages in thread
From: Jim Fehlig @ 2016-03-08 20:21 UTC (permalink / raw)
  To: Joao Martins; +Cc: libvir-list, xen-devel

Joao Martins wrote:
> 
> On 03/01/2016 04:00 AM, Jim Fehlig wrote:
>> Most hypervisors use Hardware Assisted Paging by default and don't
>> require specifying the feature in domain conf. But some hypervisors
>> support disabling HAP on a per-domain basis. To enable HAP by default
>> yet provide a knob to disable it, extend the <hap> feature with a
>> 'state=on|off' attribute, similar to <pvspinlock> and <vmport> features.
>>
>> In the absence of <hap>, the hypervisor default (on) is used. <hap>
>> without the state attribute would be the same as <hap state='on'/> for
>> backwards compatibility. And of course <hap state='off'/> disables hap.
>>
>> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
>> ---
>>  docs/formatdomain.html.in     | 6 ++++--
>>  docs/schemas/domaincommon.rng | 6 +++++-
>>  src/conf/domain_conf.c        | 4 ++--
>>  3 files changed, 11 insertions(+), 5 deletions(-)
>>
>> diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
>> index 5016772..c06bcf3 100644
>> --- a/docs/formatdomain.html.in
>> +++ b/docs/formatdomain.html.in
>> @@ -1494,8 +1494,10 @@
>>        Interrupt) for the guest.
>>        </dd>
>>        <dt><code>hap</code></dt>
>> -      <dd>Enable use of Hardware Assisted Paging if available in
>> -        the hardware.
>> +      <dd>Depending on the <code>state</code> attribute (values <code>on</code>,
>> +        <code>off</code>) enable or disable use of Hardware Assisted Paging.
>> +        The default is <code>on</code> if the hypervisor detects availability
>> +        of Hardware Assisted Paging.
>>        </dd>
>>        <dt><code>viridian</code></dt>
>>        <dd>Enable Viridian hypervisor extensions for paravirtualizing
>> diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
>> index 67af93a..dd6e93a 100644
>> --- a/docs/schemas/domaincommon.rng
>> +++ b/docs/schemas/domaincommon.rng
>> @@ -4108,7 +4108,11 @@
>>            </optional>
>>            <optional>
>>              <element name="hap">
>> -              <empty/>
>> +              <optional>
>> +                <attribute name="state">
>> +                  <ref name="virOnOff"/>
>> +                </attribute>
>> +              </optional>
> Perhaps <ref name="featurestate"/> would be better (see chunk below) ? That one
> appears to be a reference of what you are adding above, and it's the same as
> pvspinlock. Though some other elements don't appear to use this, not sure why.

Ah, thanks for catching that. 'featurestate' is definitely the better choice here.

> 
> diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
> index 89d3a6b..141122c 100644
> --- a/docs/schemas/domaincommon.rng
> +++ b/docs/schemas/domaincommon.rng
> @@ -4132,9 +4132,7 @@
>            <optional>
>              <element name="hap">
>                <optional>
> -                <attribute name="state">
> -                  <ref name="virOnOff"/>
> -                </attribute>
> +                <ref name="featurestate"/>
>                </optional>
>              </element>
>            </optional>
> 
> Other that,
> 
> Reviewed-by: Joao Martins <joao.m.martins@oracle.com>

Thanks. I've squashed in your diff, but should probably wait for any additional
comments before pushing this series.

Regards,
Jim

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [libvirt] [PATCH V2 0/4] Extend <hap> to a tristate
       [not found] ` <56DE4ED8.4060905@suse.com>
@ 2016-03-16 21:06   ` Jim Fehlig
  0 siblings, 0 replies; 14+ messages in thread
From: Jim Fehlig @ 2016-03-16 21:06 UTC (permalink / raw)
  To: libvir-list; +Cc: xen-devel

Ping V2 :-).

FYI, Joao has {Reviewed,Tested}-by the series. Thanks!

Regards,
Jim

On 03/07/2016 09:02 PM, Jim Fehlig wrote:
> On 02/29/2016 09:00 PM, Jim Fehlig wrote:
>> An expanded V2 of
>>
>> https://www.redhat.com/archives/libvir-list/2016-February/msg00140.html
>>
>> In V2, the <hap> feature is extended with a state='on|off' attribute to
>> allow differentiating the 'on' and 'off' states with not set (or hypervisor
>> default).
> Any comments about this approach? I essentially followed the same pattern as the
> <pvspinlock> and <vmport> hypervisor features.  Thanks!
>
> Regards,
> Jim
>
>> Obviously post 1.3.2 material. See individual patches for details.
>>
>> Jim Fehlig (4):
>>   conf: add 'state' attribute to <hap> feature
>>   xenconfig: change 'hap' setting to align with Xen behavior
>>   Xen drivers: show hap enabled by default in capabilities
>>   libxl: support enabling and disabling <hap> feature
>>
>>  docs/formatdomain.html.in                          |  6 ++-
>>  docs/schemas/domaincommon.rng                      |  6 ++-
>>  src/conf/domain_conf.c                             |  4 +-
>>  src/libxl/libxl_conf.c                             | 20 ++++++--
>>  src/xen/xen_hypervisor.c                           |  2 +-
>>  src/xenconfig/xen_common.c                         | 14 ++---
>>  .../test-disk-positional-parms-full.cfg            |  1 -
>>  .../test-disk-positional-parms-partial.cfg         |  1 -
>>  ...est-fullvirt-direct-kernel-boot-bogus-extra.cfg |  1 -
>>  .../test-fullvirt-direct-kernel-boot-extra.cfg     |  1 -
>>  .../test-fullvirt-direct-kernel-boot.cfg           |  1 -
>>  tests/xlconfigdata/test-fullvirt-multiusb.cfg      |  1 -
>>  tests/xlconfigdata/test-fullvirt-nohap.cfg         | 26 ++++++++++
>>  tests/xlconfigdata/test-fullvirt-nohap.xml         | 59 ++++++++++++++++++++++
>>  tests/xlconfigdata/test-new-disk.cfg               |  1 -
>>  tests/xlconfigdata/test-rbd-multihost-noauth.cfg   |  1 -
>>  tests/xlconfigdata/test-spice-features.cfg         |  1 -
>>  tests/xlconfigdata/test-spice.cfg                  |  1 -
>>  tests/xlconfigdata/test-vif-rate.cfg               |  1 -
>>  tests/xlconfigtest.c                               |  1 +
>>  tests/xmconfigdata/test-escape-paths.cfg           |  1 -
>>  .../xmconfigdata/test-fullvirt-default-feature.cfg |  1 -
>>  tests/xmconfigdata/test-fullvirt-force-hpet.cfg    |  1 -
>>  tests/xmconfigdata/test-fullvirt-force-nohpet.cfg  |  1 -
>>  tests/xmconfigdata/test-fullvirt-localtime.cfg     |  1 -
>>  tests/xmconfigdata/test-fullvirt-net-netfront.cfg  |  1 -
>>  tests/xmconfigdata/test-fullvirt-new-cdrom.cfg     |  1 -
>>  tests/xmconfigdata/test-fullvirt-nohap.cfg         | 28 ++++++++++
>>  tests/xmconfigdata/test-fullvirt-nohap.xml         | 51 +++++++++++++++++++
>>  tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg  |  1 -
>>  .../test-fullvirt-serial-dev-2-ports.cfg           |  1 -
>>  .../test-fullvirt-serial-dev-2nd-port.cfg          |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-file.cfg   |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-null.cfg   |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-pipe.cfg   |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-pty.cfg    |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-stdio.cfg  |  1 -
>>  .../test-fullvirt-serial-tcp-telnet.cfg            |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-tcp.cfg    |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-udp.cfg    |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-unix.cfg   |  1 -
>>  tests/xmconfigdata/test-fullvirt-sound.cfg         |  1 -
>>  tests/xmconfigdata/test-fullvirt-usbmouse.cfg      |  1 -
>>  tests/xmconfigdata/test-fullvirt-usbtablet.cfg     |  1 -
>>  tests/xmconfigdata/test-fullvirt-utc.cfg           |  1 -
>>  tests/xmconfigdata/test-no-source-cdrom.cfg        |  1 -
>>  tests/xmconfigdata/test-pci-devs.cfg               |  1 -
>>  tests/xmconfigtest.c                               |  1 +
>>  48 files changed, 202 insertions(+), 52 deletions(-)
>>  create mode 100644 tests/xlconfigdata/test-fullvirt-nohap.cfg
>>  create mode 100644 tests/xlconfigdata/test-fullvirt-nohap.xml
>>  create mode 100755 tests/xmconfigdata/test-fullvirt-nohap.cfg
>>  create mode 100644 tests/xmconfigdata/test-fullvirt-nohap.xml
>>
> --
> libvir-list mailing list
> libvir-list@redhat.com
> https://www.redhat.com/mailman/listinfo/libvir-list
>


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [libvirt] [PATCH V2 0/4] Extend <hap> to a tristate
  2016-03-01  4:00 [PATCH V2 0/4] Extend <hap> to a tristate Jim Fehlig
                   ` (5 preceding siblings ...)
       [not found] ` <56DE4ED8.4060905@suse.com>
@ 2016-03-21 12:49 ` Ján Tomko
  2016-03-21 15:45   ` Jim Fehlig
  6 siblings, 1 reply; 14+ messages in thread
From: Ján Tomko @ 2016-03-21 12:49 UTC (permalink / raw)
  To: Jim Fehlig; +Cc: libvir-list, xen-devel

On Mon, Feb 29, 2016 at 09:00:44PM -0700, Jim Fehlig wrote:
> An expanded V2 of
> 
> https://www.redhat.com/archives/libvir-list/2016-February/msg00140.html
> 
> In V2, the <hap> feature is extended with a state='on|off' attribute to
> allow differentiating the 'on' and 'off' states with not set (or hypervisor
> default).
> 
> Obviously post 1.3.2 material. See individual patches for details.
> 
> Jim Fehlig (4):
>   conf: add 'state' attribute to <hap> feature
>   xenconfig: change 'hap' setting to align with Xen behavior
>   Xen drivers: show hap enabled by default in capabilities
>   libxl: support enabling and disabling <hap> feature
> 
>  docs/formatdomain.html.in                          |  6 ++-
>  docs/schemas/domaincommon.rng                      |  6 ++-
>  src/conf/domain_conf.c                             |  4 +-
>  src/libxl/libxl_conf.c                             | 20 ++++++--
>  src/xen/xen_hypervisor.c                           |  2 +-
>  src/xenconfig/xen_common.c                         | 14 ++---
>  .../test-disk-positional-parms-full.cfg            |  1 -
>  .../test-disk-positional-parms-partial.cfg         |  1 -
>  ...est-fullvirt-direct-kernel-boot-bogus-extra.cfg |  1 -
>  .../test-fullvirt-direct-kernel-boot-extra.cfg     |  1 -
>  .../test-fullvirt-direct-kernel-boot.cfg           |  1 -
>  tests/xlconfigdata/test-fullvirt-multiusb.cfg      |  1 -
>  tests/xlconfigdata/test-fullvirt-nohap.cfg         | 26 ++++++++++
>  tests/xlconfigdata/test-fullvirt-nohap.xml         | 59 ++++++++++++++++++++++
>  tests/xlconfigdata/test-new-disk.cfg               |  1 -
>  tests/xlconfigdata/test-rbd-multihost-noauth.cfg   |  1 -
>  tests/xlconfigdata/test-spice-features.cfg         |  1 -
>  tests/xlconfigdata/test-spice.cfg                  |  1 -
>  tests/xlconfigdata/test-vif-rate.cfg               |  1 -
>  tests/xlconfigtest.c                               |  1 +
>  tests/xmconfigdata/test-escape-paths.cfg           |  1 -
>  .../xmconfigdata/test-fullvirt-default-feature.cfg |  1 -
>  tests/xmconfigdata/test-fullvirt-force-hpet.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-force-nohpet.cfg  |  1 -
>  tests/xmconfigdata/test-fullvirt-localtime.cfg     |  1 -
>  tests/xmconfigdata/test-fullvirt-net-netfront.cfg  |  1 -
>  tests/xmconfigdata/test-fullvirt-new-cdrom.cfg     |  1 -
>  tests/xmconfigdata/test-fullvirt-nohap.cfg         | 28 ++++++++++
>  tests/xmconfigdata/test-fullvirt-nohap.xml         | 51 +++++++++++++++++++
>  tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg  |  1 -
>  .../test-fullvirt-serial-dev-2-ports.cfg           |  1 -
>  .../test-fullvirt-serial-dev-2nd-port.cfg          |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-file.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-null.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-pipe.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-pty.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-stdio.cfg  |  1 -
>  .../test-fullvirt-serial-tcp-telnet.cfg            |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-tcp.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-udp.cfg    |  1 -
>  tests/xmconfigdata/test-fullvirt-serial-unix.cfg   |  1 -
>  tests/xmconfigdata/test-fullvirt-sound.cfg         |  1 -
>  tests/xmconfigdata/test-fullvirt-usbmouse.cfg      |  1 -
>  tests/xmconfigdata/test-fullvirt-usbtablet.cfg     |  1 -
>  tests/xmconfigdata/test-fullvirt-utc.cfg           |  1 -
>  tests/xmconfigdata/test-no-source-cdrom.cfg        |  1 -
>  tests/xmconfigdata/test-pci-devs.cfg               |  1 -
>  tests/xmconfigtest.c                               |  1 +
>  48 files changed, 202 insertions(+), 52 deletions(-)
>  create mode 100644 tests/xlconfigdata/test-fullvirt-nohap.cfg
>  create mode 100644 tests/xlconfigdata/test-fullvirt-nohap.xml
>  create mode 100755 tests/xmconfigdata/test-fullvirt-nohap.cfg
>  create mode 100644 tests/xmconfigdata/test-fullvirt-nohap.xml
> 

ACK series

Jan

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [libvirt] [PATCH V2 0/4] Extend <hap> to a tristate
  2016-03-21 12:49 ` Ján Tomko
@ 2016-03-21 15:45   ` Jim Fehlig
  0 siblings, 0 replies; 14+ messages in thread
From: Jim Fehlig @ 2016-03-21 15:45 UTC (permalink / raw)
  To: Ján Tomko; +Cc: libvir-list, xen-devel

On 03/21/2016 06:49 AM, Ján Tomko wrote:
> On Mon, Feb 29, 2016 at 09:00:44PM -0700, Jim Fehlig wrote:
>> An expanded V2 of
>>
>> https://www.redhat.com/archives/libvir-list/2016-February/msg00140.html
>>
>> In V2, the <hap> feature is extended with a state='on|off' attribute to
>> allow differentiating the 'on' and 'off' states with not set (or hypervisor
>> default).
>>
>> Obviously post 1.3.2 material. See individual patches for details.
>>
>> Jim Fehlig (4):
>>   conf: add 'state' attribute to <hap> feature
>>   xenconfig: change 'hap' setting to align with Xen behavior
>>   Xen drivers: show hap enabled by default in capabilities
>>   libxl: support enabling and disabling <hap> feature
>>
>>  docs/formatdomain.html.in                          |  6 ++-
>>  docs/schemas/domaincommon.rng                      |  6 ++-
>>  src/conf/domain_conf.c                             |  4 +-
>>  src/libxl/libxl_conf.c                             | 20 ++++++--
>>  src/xen/xen_hypervisor.c                           |  2 +-
>>  src/xenconfig/xen_common.c                         | 14 ++---
>>  .../test-disk-positional-parms-full.cfg            |  1 -
>>  .../test-disk-positional-parms-partial.cfg         |  1 -
>>  ...est-fullvirt-direct-kernel-boot-bogus-extra.cfg |  1 -
>>  .../test-fullvirt-direct-kernel-boot-extra.cfg     |  1 -
>>  .../test-fullvirt-direct-kernel-boot.cfg           |  1 -
>>  tests/xlconfigdata/test-fullvirt-multiusb.cfg      |  1 -
>>  tests/xlconfigdata/test-fullvirt-nohap.cfg         | 26 ++++++++++
>>  tests/xlconfigdata/test-fullvirt-nohap.xml         | 59 ++++++++++++++++++++++
>>  tests/xlconfigdata/test-new-disk.cfg               |  1 -
>>  tests/xlconfigdata/test-rbd-multihost-noauth.cfg   |  1 -
>>  tests/xlconfigdata/test-spice-features.cfg         |  1 -
>>  tests/xlconfigdata/test-spice.cfg                  |  1 -
>>  tests/xlconfigdata/test-vif-rate.cfg               |  1 -
>>  tests/xlconfigtest.c                               |  1 +
>>  tests/xmconfigdata/test-escape-paths.cfg           |  1 -
>>  .../xmconfigdata/test-fullvirt-default-feature.cfg |  1 -
>>  tests/xmconfigdata/test-fullvirt-force-hpet.cfg    |  1 -
>>  tests/xmconfigdata/test-fullvirt-force-nohpet.cfg  |  1 -
>>  tests/xmconfigdata/test-fullvirt-localtime.cfg     |  1 -
>>  tests/xmconfigdata/test-fullvirt-net-netfront.cfg  |  1 -
>>  tests/xmconfigdata/test-fullvirt-new-cdrom.cfg     |  1 -
>>  tests/xmconfigdata/test-fullvirt-nohap.cfg         | 28 ++++++++++
>>  tests/xmconfigdata/test-fullvirt-nohap.xml         | 51 +++++++++++++++++++
>>  tests/xmconfigdata/test-fullvirt-parallel-tcp.cfg  |  1 -
>>  .../test-fullvirt-serial-dev-2-ports.cfg           |  1 -
>>  .../test-fullvirt-serial-dev-2nd-port.cfg          |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-file.cfg   |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-null.cfg   |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-pipe.cfg   |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-pty.cfg    |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-stdio.cfg  |  1 -
>>  .../test-fullvirt-serial-tcp-telnet.cfg            |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-tcp.cfg    |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-udp.cfg    |  1 -
>>  tests/xmconfigdata/test-fullvirt-serial-unix.cfg   |  1 -
>>  tests/xmconfigdata/test-fullvirt-sound.cfg         |  1 -
>>  tests/xmconfigdata/test-fullvirt-usbmouse.cfg      |  1 -
>>  tests/xmconfigdata/test-fullvirt-usbtablet.cfg     |  1 -
>>  tests/xmconfigdata/test-fullvirt-utc.cfg           |  1 -
>>  tests/xmconfigdata/test-no-source-cdrom.cfg        |  1 -
>>  tests/xmconfigdata/test-pci-devs.cfg               |  1 -
>>  tests/xmconfigtest.c                               |  1 +
>>  48 files changed, 202 insertions(+), 52 deletions(-)
>>  create mode 100644 tests/xlconfigdata/test-fullvirt-nohap.cfg
>>  create mode 100644 tests/xlconfigdata/test-fullvirt-nohap.xml
>>  create mode 100755 tests/xmconfigdata/test-fullvirt-nohap.cfg
>>  create mode 100644 tests/xmconfigdata/test-fullvirt-nohap.xml
>>
> ACK series

Thanks a lot for taking a look, much appreciated! Pushed now.

Regards,
Jim


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2016-03-21 15:45 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-01  4:00 [PATCH V2 0/4] Extend <hap> to a tristate Jim Fehlig
2016-03-01  4:00 ` [PATCH V2 1/4] conf: add 'state' attribute to <hap> feature Jim Fehlig
2016-03-08 16:37   ` [libvirt] " Joao Martins
2016-03-08 20:21     ` Jim Fehlig
2016-03-01  4:00 ` [PATCH V2 2/4] xenconfig: change 'hap' setting to align with Xen behavior Jim Fehlig
2016-03-08 16:37   ` [libvirt] " Joao Martins
2016-03-01  4:00 ` [PATCH V2 3/4] Xen drivers: show hap enabled by default in capabilities Jim Fehlig
2016-03-08 16:37   ` [libvirt] " Joao Martins
2016-03-01  4:00 ` [PATCH V2 4/4] libxl: support enabling and disabling <hap> feature Jim Fehlig
2016-03-08 16:37   ` [libvirt] " Joao Martins
2016-03-08  4:02 ` [libvirt] [PATCH V2 0/4] Extend <hap> to a tristate Jim Fehlig
     [not found] ` <56DE4ED8.4060905@suse.com>
2016-03-16 21:06   ` Jim Fehlig
2016-03-21 12:49 ` Ján Tomko
2016-03-21 15:45   ` Jim Fehlig

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).