xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Juergen Gross <jgross@suse.com>
To: xen-devel@lists.xen.org
Cc: Juergen Gross <jgross@suse.com>,
	wei.liu2@citrix.com, ian.jackson@eu.citrix.com, cyliu@suse.com,
	stefano.stabellini@eu.citrix.com
Subject: [PATCH 1/3] libxl: make libxl__need_xenpv_qemu() operate on domain config
Date: Thu, 10 Mar 2016 16:00:49 +0100	[thread overview]
Message-ID: <1457622051-30189-2-git-send-email-jgross@suse.com> (raw)
In-Reply-To: <1457622051-30189-1-git-send-email-jgross@suse.com>

libxl__need_xenpv_qemu() is called with configuration data for console,
vfbs, disks and channels today in order to evaluate the need for
starting a device model for a pv domain.

The console data is local to the caller and setup in a way to never
require a device model. All other data is taken from the domain config
structure.

In order to support other device backends via qemu change the interface
of libxl__need_xenpv_qemu() to take the domain config structure as
input instead of the single device arrays.

Signed-off-by: Juergen Gross <jgross@suse.com>
---
 tools/libxl/libxl_create.c   |  9 +------
 tools/libxl/libxl_dm.c       | 59 ++++++++++++--------------------------------
 tools/libxl/libxl_internal.h |  5 +---
 3 files changed, 18 insertions(+), 55 deletions(-)

diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 61b5c01..0e2b0a0 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -1304,7 +1304,6 @@ static void domcreate_launch_dm(libxl__egc *egc, libxl__multidev *multidev,
     }
     case LIBXL_DOMAIN_TYPE_PV:
     {
-        int need_qemu = 0;
         libxl__device_console console;
         libxl__device device;
 
@@ -1314,17 +1313,11 @@ static void domcreate_launch_dm(libxl__egc *egc, libxl__multidev *multidev,
         }
 
         init_console_info(gc, &console, 0);
-
-        need_qemu = libxl__need_xenpv_qemu(gc, 1, &console,
-                d_config->num_vfbs, d_config->vfbs,
-                d_config->num_disks, &d_config->disks[0],
-                d_config->num_channels, &d_config->channels[0]);
-
         console.backend_domid = state->console_domid;
         libxl__device_console_add(gc, domid, &console, state, &device);
         libxl__device_console_dispose(&console);
 
-        if (need_qemu) {
+        if (libxl__need_xenpv_qemu(gc, d_config)) {
             dcs->dmss.dm.guest_domid = domid;
             libxl__spawn_local_dm(egc, &dcs->dmss.dm);
             return;
diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
index 4aca38e..4b840f4 100644
--- a/tools/libxl/libxl_dm.c
+++ b/tools/libxl/libxl_dm.c
@@ -2107,61 +2107,34 @@ int libxl__destroy_device_model(libxl__gc *gc, uint32_t domid)
                 GCSPRINTF("/local/domain/%d/image/device-model-pid", domid));
 }
 
-int libxl__need_xenpv_qemu(libxl__gc *gc,
-        int nr_consoles, libxl__device_console *consoles,
-        int nr_vfbs, libxl_device_vfb *vfbs,
-        int nr_disks, libxl_device_disk *disks,
-        int nr_channels, libxl_device_channel *channels)
+int libxl__need_xenpv_qemu(libxl__gc *gc, libxl_domain_config *d_config)
 {
-    int i, ret = 0;
+    int i, ret;
     uint32_t domid;
 
-    /*
-     * qemu is required in order to support 2 or more consoles. So switch all
-     * backends to qemu if this is the case
-     */
-    if (nr_consoles > 1) {
-        for (i = 0; i < nr_consoles; i++)
-            consoles[i].consback = LIBXL__CONSOLE_BACKEND_IOEMU;
+    ret = libxl__get_domid(gc, &domid);
+    if (ret) goto out;
+
+    if (d_config->num_vfbs > 0) {
         ret = 1;
         goto out;
     }
 
-    for (i = 0; i < nr_consoles; i++) {
-        if (consoles[i].consback == LIBXL__CONSOLE_BACKEND_IOEMU) {
+    for (i = 0; i < d_config->num_disks; i++) {
+        if (d_config->disks[i].backend == LIBXL_DISK_BACKEND_QDISK &&
+            d_config->disks[i].backend_domid == domid) {
             ret = 1;
             goto out;
         }
     }
 
-    if (nr_vfbs > 0) {
-        ret = 1;
-        goto out;
-    }
-
-    if (nr_disks > 0) {
-        ret = libxl__get_domid(gc, &domid);
-        if (ret) goto out;
-        for (i = 0; i < nr_disks; i++) {
-            if (disks[i].backend == LIBXL_DISK_BACKEND_QDISK &&
-                disks[i].backend_domid == domid) {
-                ret = 1;
-                goto out;
-            }
-        }
-    }
-
-    if (nr_channels > 0) {
-        ret = libxl__get_domid(gc, &domid);
-        if (ret) goto out;
-        for (i = 0; i < nr_channels; i++) {
-            if (channels[i].backend_domid == domid) {
-                /* xenconsoled is limited to the first console only.
-                   Until this restriction is removed we must use qemu for
-                   secondary consoles which includes all channels. */
-                ret = 1;
-                goto out;
-            }
+    for (i = 0; i < d_config->num_channels; i++) {
+        if (d_config->channels[i].backend_domid == domid) {
+            /* xenconsoled is limited to the first console only.
+               Until this restriction is removed we must use qemu for
+               secondary consoles which includes all channels. */
+            ret = 1;
+            goto out;
         }
     }
 
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 345a764..fc7bdab 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -1616,10 +1616,7 @@ _hidden int libxl__domain_build(libxl__gc *gc,
 _hidden const char *libxl__domain_device_model(libxl__gc *gc,
                                         const libxl_domain_build_info *info);
 _hidden int libxl__need_xenpv_qemu(libxl__gc *gc,
-        int nr_consoles, libxl__device_console *consoles,
-        int nr_vfbs, libxl_device_vfb *vfbs,
-        int nr_disks, libxl_device_disk *disks,
-        int nr_channels, libxl_device_channel *channels);
+                                   libxl_domain_config *d_config);
 
 /*
  * This function will fix reserved device memory conflict
-- 
2.6.2


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

  reply	other threads:[~2016-03-10 15:00 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-10 15:00 [PATCH 0/3] libxl: add support for qemu base pvusb backend Juergen Gross
2016-03-10 15:00 ` Juergen Gross [this message]
2016-03-17 16:53   ` [PATCH 1/3] libxl: make libxl__need_xenpv_qemu() operate on domain config George Dunlap
2016-03-18  8:23     ` Juergen Gross
2016-03-10 15:00 ` [PATCH 2/3] libxl: add domain config parameter to force start of qemu Juergen Gross
2016-03-17 16:06   ` George Dunlap
2016-03-18  8:11     ` Juergen Gross
2016-03-21 14:28       ` George Dunlap
2016-03-21 14:44         ` Juergen Gross
2016-03-10 15:00 ` [PATCH 3/3] libxl: add new pvusb backend "qusb" provided by qemu Juergen Gross
2016-03-17 16:39   ` George Dunlap
2016-03-18  8:22     ` Juergen Gross
2016-03-17 16:55   ` George Dunlap
2016-03-18  8:24     ` Juergen Gross
2016-03-24 20:07       ` Wei Liu
2016-03-25  6:09         ` Juergen Gross
2016-03-29  9:45           ` George Dunlap
2016-03-29 10:35             ` Juergen Gross
2016-03-30  4:43               ` Juergen Gross

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1457622051-30189-2-git-send-email-jgross@suse.com \
    --to=jgross@suse.com \
    --cc=cyliu@suse.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xen.org \
    --subject='Re: [PATCH 1/3] libxl: make libxl__need_xenpv_qemu() operate on domain config' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).