From: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
To: xen devel <xen-devel@lists.xen.org>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Ian Campbell <ian.campbell@citrix.com>,
Ian Jackson <ian.jackson@eu.citrix.com>,
Wei Liu <wei.liu2@citrix.com>
Cc: Lars Kurth <lars.kurth@citrix.com>,
Changlong Xie <xiecl.fnst@cn.fujitsu.com>,
Wen Congyang <wency@cn.fujitsu.com>,
Li Zhijian <lizhijian@cn.fujitsu.com>,
Gui Jianfeng <guijianfeng@cn.fujitsu.com>,
Jiang Yunhong <yunhong.jiang@intel.com>,
Dong Eddie <eddie.dong@intel.com>,
Anthony Perard <anthony.perard@citrix.com>,
Shriram Rajagopalan <rshriram@cs.ubc.ca>,
Yang Hongyang <hongyang.yang@easystack.cn>
Subject: [PATCH v12 21/26] COLO: use qemu block replication
Date: Wed, 23 Mar 2016 16:06:35 +0800 [thread overview]
Message-ID: <1458720400-4699-22-git-send-email-xiecl.fnst@cn.fujitsu.com> (raw)
In-Reply-To: <1458720400-4699-1-git-send-email-xiecl.fnst@cn.fujitsu.com>
From: Wen Congyang <wency@cn.fujitsu.com>
Use qemu block replication as our block replication solution.
Note that guest must be paused before starting COLO, otherwise,
the disk won't be consistent between primary and secondary.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
---
tools/libxl/Makefile | 1 +
tools/libxl/libxl_colo.h | 15 +++
tools/libxl/libxl_colo_qdisk.c | 230 +++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_colo_restore.c | 42 ++++++-
tools/libxl/libxl_colo_save.c | 54 ++++++++-
tools/libxl/libxl_internal.h | 5 +
6 files changed, 342 insertions(+), 5 deletions(-)
create mode 100644 tools/libxl/libxl_colo_qdisk.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 2016393..28d54d0 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -66,6 +66,7 @@ endif
LIBXL_OBJS-y += libxl_remus.o libxl_checkpoint_device.o libxl_remus_disk_drbd.o
LIBXL_OBJS-y += libxl_colo_restore.o libxl_colo_save.o
+LIBXL_OBJS-y += libxl_colo_qdisk.o
LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
diff --git a/tools/libxl/libxl_colo.h b/tools/libxl/libxl_colo.h
index feec7f1..90345f4 100644
--- a/tools/libxl/libxl_colo.h
+++ b/tools/libxl/libxl_colo.h
@@ -19,6 +19,7 @@
struct libxl__ao;
struct libxl__egc;
struct libxl__colo_save_state;
+struct libxl__checkpoint_devices_state;
enum {
LIBXL_COLO_SETUPED,
@@ -26,6 +27,10 @@ enum {
LIBXL_COLO_RESUMED,
};
+typedef struct libxl__colo_qdisk {
+ bool setuped;
+} libxl__colo_qdisk;
+
typedef struct libxl__domain_create_state libxl__domain_create_state;
typedef void libxl__domain_create_cb(struct libxl__egc *egc,
libxl__domain_create_state *dcs,
@@ -47,8 +52,18 @@ struct libxl__colo_restore_state {
/* private, colo restore checkpoint state */
libxl__domain_create_cb *saved_cb;
void *crcs;
+
+ /* private, used by qdisk block replication */
+ bool qdisk_used;
+ bool qdisk_setuped;
+ const char *host;
+ const char *port;
};
+int init_subkind_qdisk(struct libxl__checkpoint_devices_state *cds);
+
+void cleanup_subkind_qdisk(struct libxl__checkpoint_devices_state *cds);
+
extern void libxl__colo_restore_setup(struct libxl__egc *egc,
libxl__colo_restore_state *crs);
extern void libxl__colo_restore_teardown(struct libxl__egc *egc, void *dcs_void,
diff --git a/tools/libxl/libxl_colo_qdisk.c b/tools/libxl/libxl_colo_qdisk.c
new file mode 100644
index 0000000..c23b81b
--- /dev/null
+++ b/tools/libxl/libxl_colo_qdisk.c
@@ -0,0 +1,230 @@
+/*
+ * Copyright (C) 2016 FUJITSU LIMITED
+ * Author: Wen Congyang <wency@cn.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+
+/* ========== init() and cleanup() ========== */
+
+int init_subkind_qdisk(libxl__checkpoint_devices_state *cds)
+{
+ /*
+ * We don't know if we use qemu block replication, so
+ * we cannot start block replication here.
+ */
+ return 0;
+}
+
+void cleanup_subkind_qdisk(libxl__checkpoint_devices_state *cds)
+{
+}
+
+/* ========== setup() and teardown() ========== */
+
+static void colo_qdisk_setup(libxl__egc *egc, libxl__checkpoint_device *dev,
+ bool primary)
+{
+ const libxl_device_disk *disk = dev->backend_dev;
+ int ret, rc = 0;
+ libxl__colo_qdisk *colo_qdisk = NULL;
+ char port[32];
+
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *const cds = dev->cds;
+ const char *host = disk->colo_host;
+ const char *export_name = disk->colo_export;
+ const int domid = cds->domid;
+
+ STATE_AO_GC(dev->cds->ao);
+
+ if (disk->backend != LIBXL_DISK_BACKEND_QDISK ||
+ !libxl_defbool_val(disk->colo_enable) ||
+ !host || !export_name || (disk->colo_port <= 0) ||
+ !disk->active_disk || !disk->hidden_disk) {
+ rc = ERROR_CHECKPOINT_DEVOPS_DOES_NOT_MATCH;
+ goto out;
+ }
+
+ dev->matched = true;
+
+ GCNEW(colo_qdisk);
+ dev->concrete_data = colo_qdisk;
+
+ if (primary) {
+ libxl__colo_save_state *css = cds->concrete_data;
+
+ css->qdisk_used = true;
+ /* NBD server is not ready, so we cannot start block replication now */
+ goto out;
+ } else {
+ libxl__colo_restore_state *crs = cds->concrete_data;
+ sprintf(port, "%d", disk->colo_port);
+
+ if (!crs->qdisk_used) {
+ /* start nbd server */
+ ret = libxl__qmp_nbd_server_start(gc, domid, host, port);
+ if (ret) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ crs->host = host;
+ crs->port = port;
+ } else {
+ if (strcmp(crs->host, host) || strcmp(crs->port, port)) {
+ LOG(ERROR, "The host and port of all disks must be the same");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ crs->qdisk_used = true;
+
+ ret = libxl__qmp_nbd_server_add(gc, domid, export_name);
+ if (ret)
+ rc = ERROR_FAIL;
+
+ colo_qdisk->setuped = true;
+ }
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+static void colo_qdisk_teardown(libxl__egc *egc, libxl__checkpoint_device *dev,
+ bool primary)
+{
+ int ret, rc = 0;
+ const libxl__colo_qdisk *colo_qdisk = dev->concrete_data;
+ const libxl_device_disk *disk = dev->backend_dev;
+
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *const cds = dev->cds;
+ const int domid = cds->domid;
+ const char *export_name = disk->colo_export;
+
+ EGC_GC;
+
+ if (primary) {
+ if (!colo_qdisk->setuped)
+ goto out;
+
+ /*
+ * There is no way to get the child name, but we know it is children.1
+ */
+ ret = libxl__qmp_x_blockdev_change(gc, domid, export_name,
+ "children.1", NULL);
+ if (ret)
+ rc = ERROR_FAIL;
+ } else {
+ libxl__colo_restore_state *crs = cds->concrete_data;
+
+ if (crs->qdisk_used) {
+ ret = libxl__qmp_nbd_server_stop(gc, domid);
+ if (ret)
+ rc = ERROR_FAIL;
+ }
+ }
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+/* ========== checkpointing APIs ========== */
+
+static void colo_qdisk_save_preresume(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ libxl__colo_qdisk *colo_qdisk = dev->concrete_data;
+ const libxl_device_disk *disk = dev->backend_dev;
+ int ret, rc = 0;
+ char *node = NULL;
+ char *cmd = NULL;
+
+ /* Convenience aliases */
+ const int domid = dev->cds->domid;
+ const char *host = disk->colo_host;
+ int port = disk->colo_port;
+ const char *export_name = disk->colo_export;
+
+ EGC_GC;
+
+ if (colo_qdisk->setuped)
+ goto out;
+
+ /* qmp command doesn't support the driver "nbd" */
+ node = GCSPRINTF("colo_node%d",
+ libxl__device_disk_dev_number(disk->vdev, NULL, NULL));
+ cmd = GCSPRINTF("drive_add buddy driver=replication,mode=primary,"
+ "file.driver=nbd,file.host=%s,file.port=%d,"
+ "file.export=%s,node-name=%s,if=none",
+ host, port, export_name, node);
+ ret = libxl__qmp_hmp(gc, domid, cmd);
+ if (ret)
+ rc = ERROR_FAIL;
+
+ ret = libxl__qmp_x_blockdev_change(gc, domid, export_name, NULL, node);
+ if (ret)
+ rc = ERROR_FAIL;
+
+ colo_qdisk->setuped = true;
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+/* ======== primary ======== */
+
+static void colo_qdisk_save_setup(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ colo_qdisk_setup(egc, dev, true);
+}
+
+static void colo_qdisk_save_teardown(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ colo_qdisk_teardown(egc, dev, true);
+}
+
+const libxl__checkpoint_device_instance_ops colo_save_device_qdisk = {
+ .kind = LIBXL__DEVICE_KIND_VBD,
+ .setup = colo_qdisk_save_setup,
+ .teardown = colo_qdisk_save_teardown,
+ .preresume = colo_qdisk_save_preresume,
+};
+
+/* ======== secondary ======== */
+
+static void colo_qdisk_restore_setup(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ colo_qdisk_setup(egc, dev, false);
+}
+
+static void colo_qdisk_restore_teardown(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ colo_qdisk_teardown(egc, dev, false);
+}
+
+const libxl__checkpoint_device_instance_ops colo_restore_device_qdisk = {
+ .kind = LIBXL__DEVICE_KIND_VBD,
+ .setup = colo_qdisk_restore_setup,
+ .teardown = colo_qdisk_restore_teardown,
+};
diff --git a/tools/libxl/libxl_colo_restore.c b/tools/libxl/libxl_colo_restore.c
index 04b02d8..2ab69ed 100644
--- a/tools/libxl/libxl_colo_restore.c
+++ b/tools/libxl/libxl_colo_restore.c
@@ -37,7 +37,10 @@ struct libxl__colo_restore_checkpoint_state {
int);
};
+extern const libxl__checkpoint_device_instance_ops colo_restore_device_qdisk;
+
static const libxl__checkpoint_device_instance_ops *colo_restore_ops[] = {
+ &colo_restore_device_qdisk,
NULL,
};
@@ -137,7 +140,11 @@ static int init_device_subkind(libxl__checkpoint_devices_state *cds)
int rc;
STATE_AO_GC(cds->ao);
+ rc = init_subkind_qdisk(cds);
+ if (rc) goto out;
+
rc = 0;
+out:
return rc;
}
@@ -145,6 +152,8 @@ static void cleanup_device_subkind(libxl__checkpoint_devices_state *cds)
{
/* cleanup device subkind-specific state in the libxl ctx */
STATE_AO_GC(cds->ao);
+
+ cleanup_subkind_qdisk(cds);
}
/* ================ colo: setup restore environment ================ */
@@ -213,6 +222,8 @@ void libxl__colo_restore_setup(libxl__egc *egc,
GCNEW(crcs);
crs->crcs = crcs;
crcs->crs = crs;
+ crs->qdisk_setuped = false;
+ crs->qdisk_used = false;
/* setup dsps */
crcs->dsps.ao = ao;
@@ -301,6 +312,11 @@ void libxl__colo_restore_teardown(libxl__egc *egc, void *dcs_void,
}
libxl__xc_domain_restore_done(egc, dcs, ret, retval, errnoval);
+ if (crs->qdisk_setuped) {
+ libxl__qmp_stop_replication(gc, crs->domid, false);
+ crs->qdisk_setuped = false;
+ }
+
crcs->saved_rc = rc;
if (!crcs->teardown_devices) {
colo_restore_teardown_devices_done(egc, &dcs->cds, 0);
@@ -573,6 +589,13 @@ static void colo_restore_preresume_cb(libxl__egc *egc,
goto out;
}
+ if (crs->qdisk_setuped) {
+ if (libxl__qmp_do_checkpoint(gc, crs->domid)) {
+ LOG(ERROR, "doing checkpoint fails");
+ goto out;
+ }
+ }
+
colo_restore_resume_vm(egc, crcs);
return;
@@ -730,8 +753,8 @@ static void colo_setup_checkpoint_devices(libxl__egc *egc,
STATE_AO_GC(crs->ao);
- /* TODO: disk/nic support */
- cds->device_kind_flags = 0;
+ /* TODO: nic support */
+ cds->device_kind_flags = (1 << LIBXL__DEVICE_KIND_VBD);
cds->callback = colo_restore_setup_cds_done;
cds->ao = ao;
cds->domid = crs->domid;
@@ -768,6 +791,14 @@ static void colo_restore_setup_cds_done(libxl__egc *egc,
goto out;
}
+ if (crs->qdisk_used && !crs->qdisk_setuped) {
+ if (libxl__qmp_start_replication(gc, crs->domid, false)) {
+ LOG(ERROR, "starting replication fails");
+ goto out;
+ }
+ crs->qdisk_setuped = true;
+ }
+
colo_send_svm_ready(egc, crcs);
return;
@@ -922,13 +953,18 @@ static void colo_suspend_vm_done(libxl__egc *egc,
crcs->status = LIBXL_COLO_SUSPENDED;
+ if (libxl__qmp_get_replication_error(gc, crs->domid)) {
+ LOG(ERROR, "replication error occurs when secondary vm is running");
+ goto out;
+ }
+
cds->callback = colo_restore_postsuspend_cb;
libxl__checkpoint_devices_postsuspend(egc, cds);
return;
out:
- libxl__xc_domain_saverestore_async_callback_done(egc, &dcs->srs.shs, !rc);
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dcs->srs.shs, 0);
}
static void colo_restore_postsuspend_cb(libxl__egc *egc,
diff --git a/tools/libxl/libxl_colo_save.c b/tools/libxl/libxl_colo_save.c
index f25e06b..070d729 100644
--- a/tools/libxl/libxl_colo_save.c
+++ b/tools/libxl/libxl_colo_save.c
@@ -18,7 +18,10 @@
#include "libxl_internal.h"
+extern const libxl__checkpoint_device_instance_ops colo_save_device_qdisk;
+
static const libxl__checkpoint_device_instance_ops *colo_ops[] = {
+ &colo_save_device_qdisk,
NULL,
};
@@ -30,7 +33,11 @@ static int init_device_subkind(libxl__checkpoint_devices_state *cds)
int rc;
STATE_AO_GC(cds->ao);
+ rc = init_subkind_qdisk(cds);
+ if (rc) goto out;
+
rc = 0;
+out:
return rc;
}
@@ -38,6 +45,8 @@ static void cleanup_device_subkind(libxl__checkpoint_devices_state *cds)
{
/* cleanup device subkind-specific state in the libxl ctx */
STATE_AO_GC(cds->ao);
+
+ cleanup_subkind_qdisk(cds);
}
/* ================= colo: setup save environment ================= */
@@ -79,9 +88,12 @@ void libxl__colo_save_setup(libxl__egc *egc, libxl__colo_save_state *css)
css->send_fd = dss->fd;
css->recv_fd = dss->recv_fd;
css->svm_running = false;
+ css->paused = true;
+ css->qdisk_setuped = false;
+ css->qdisk_used = false;
- /* TODO: disk/nic support */
- cds->device_kind_flags = 0;
+ /* TODO: nic support */
+ cds->device_kind_flags = (1 << LIBXL__DEVICE_KIND_VBD);
cds->ops = colo_ops;
cds->callback = colo_save_setup_done;
cds->ao = ao;
@@ -161,6 +173,11 @@ void libxl__colo_save_teardown(libxl__egc *egc,
libxl__stream_read_abort(egc, &css->srs, 1);
+ if (css->qdisk_setuped) {
+ libxl__qmp_stop_replication(gc, dss->domid, true);
+ css->qdisk_setuped = false;
+ }
+
dss->cds.callback = colo_teardown_done;
libxl__checkpoint_devices_teardown(egc, &dss->cds);
return;
@@ -289,6 +306,11 @@ static void colo_read_svm_suspended_done(libxl__egc *egc,
goto out;
}
+ if (!css->paused && libxl__qmp_get_replication_error(gc, dss->domid)) {
+ LOG(ERROR, "replication error occurs when primary vm is running");
+ goto out;
+ }
+
ok = 1;
out:
@@ -387,12 +409,40 @@ static void colo_preresume_cb(libxl__egc *egc,
goto out;
}
+ if (css->qdisk_used && !css->qdisk_setuped) {
+ if (libxl__qmp_start_replication(gc, dss->domid, true)) {
+ LOG(ERROR, "starting replication fails");
+ goto out;
+ }
+ css->qdisk_setuped = true;
+ }
+
+ if (!css->paused) {
+ if (libxl__qmp_do_checkpoint(gc, dss->domid)) {
+ LOG(ERROR, "doing checkpoint fails");
+ goto out;
+ }
+ }
+
/* Resumes the domain and the device model */
if (libxl__domain_resume(gc, dss->domid, /* Fast Suspend */1)) {
LOG(ERROR, "cannot resume primary vm");
goto out;
}
+ /*
+ * The guest should be paused before doing colo because there is
+ * no disk migration.
+ */
+ if (css->paused) {
+ rc = libxl_domain_unpause(CTX, dss->domid);
+ if (rc) {
+ LOG(ERROR, "cannot unpause primary vm");
+ goto out;
+ }
+ css->paused = false;
+ }
+
/* read CHECKPOINT_SVM_RESUMED */
css->callback = colo_read_svm_resumed_done;
css->srs.checkpoint_callback = colo_common_read_stream_done;
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index d6ca232..3b9504f 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3193,6 +3193,11 @@ struct libxl__colo_save_state {
libxl__stream_read_state srs;
void (*callback)(libxl__egc *, libxl__colo_save_state *, int);
bool svm_running;
+ bool paused;
+
+ /* private, used by qdisk block replication */
+ bool qdisk_used;
+ bool qdisk_setuped;
};
typedef struct libxl__logdirty_switch {
--
1.9.3
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-03-23 8:06 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-23 8:06 [PATCH v12 00/26] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Changlong Xie
2016-03-23 8:06 ` [PATCH v12 01/26] tools/libxl: introduction of libxl__qmp_restore to load qemu state Changlong Xie
2016-03-23 8:06 ` [PATCH v12 02/26] tools/libxl: introduce libxl__domain_common_switch_qemu_logdirty() Changlong Xie
2016-03-23 8:06 ` [PATCH v12 03/26] tools/libxl: Add back channel to allow migration target send data back Changlong Xie
2016-03-23 8:06 ` [PATCH v12 04/26] tools/libxl: Introduce new helper function dup_fd_helper() Changlong Xie
2016-03-23 8:06 ` [PATCH v12 05/26] tools/libx{l, c}: add back channel to libxc Changlong Xie
2016-03-23 8:06 ` [PATCH v12 06/26] docs: add colo readme Changlong Xie
2016-03-23 8:06 ` [PATCH v12 07/26] docs/libxl: Introduce CHECKPOINT_CONTEXT to support migration v2 colo streams Changlong Xie
2016-03-24 14:53 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 08/26] libxc/migration: Specification update for DIRTY_PFN_LIST records Changlong Xie
2016-03-24 14:56 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 09/26] libxc/migration: export read_record for common use Changlong Xie
2016-03-23 8:06 ` [PATCH v12 10/26] tools/libxl: add back channel support to write stream Changlong Xie
2016-03-24 16:49 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 11/26] tools/libxl: add back channel support to read stream Changlong Xie
2016-03-24 14:57 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 12/26] secondary vm suspend/resume/checkpoint code Changlong Xie
2016-03-24 15:15 ` Ian Jackson
2016-03-25 2:00 ` Changlong Xie
2016-03-23 8:06 ` [PATCH v12 13/26] libxl_internal: move stream read manipulations to right place Changlong Xie
2016-03-24 15:17 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 14/26] primary vm suspend/resume/checkpoint code Changlong Xie
2016-03-24 15:24 ` Ian Jackson
2016-03-25 2:00 ` Changlong Xie
2016-03-25 6:33 ` Changlong Xie
2016-03-23 8:06 ` [PATCH v12 15/26] libxc/restore: support COLO restore Changlong Xie
2016-03-24 15:27 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 16/26] libxc/save: support COLO save Changlong Xie
2016-03-24 15:28 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 17/26] implement the cmdline for COLO Changlong Xie
2016-03-24 15:34 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 18/26] COLO: introduce new API to prepare/start/do/get_error/stop replication Changlong Xie
2016-03-23 8:06 ` [PATCH v12 19/26] Introduce COLO mode and refactor relevant function Changlong Xie
2016-03-24 15:45 ` Ian Jackson
2016-03-25 2:02 ` Changlong Xie
2016-03-23 8:06 ` [PATCH v12 20/26] Support colo mode for qemu disk Changlong Xie
2016-03-23 8:06 ` Changlong Xie [this message]
2016-03-24 15:54 ` [PATCH v12 21/26] COLO: use qemu block replication Ian Jackson
2016-03-23 8:06 ` [PATCH v12 22/26] COLO proxy: implement setup/teardown/preresume/postresume/checkpoint Changlong Xie
2016-03-24 15:59 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 23/26] COLO nic: implement COLO nic subkind Changlong Xie
2016-03-24 16:05 ` Ian Jackson
2016-03-25 2:29 ` Changlong Xie
2016-03-25 6:09 ` Changlong Xie
2016-03-25 12:23 ` Wei Liu
2016-03-28 3:20 ` Changlong Xie
2016-03-23 8:06 ` [PATCH v12 24/26] setup and control colo proxy on primary side Changlong Xie
2016-03-24 16:06 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 25/26] setup and control colo proxy on secondary side Changlong Xie
2016-03-24 16:06 ` Ian Jackson
2016-03-23 8:06 ` [PATCH v12 26/26] cmdline switches and config vars to control colo-proxy Changlong Xie
2016-03-24 16:12 ` Ian Jackson
2016-03-25 2:57 ` Changlong Xie
2016-03-25 6:10 ` Changlong Xie
2016-03-25 12:29 ` Wei Liu
2016-03-28 3:21 ` Changlong Xie
2016-03-24 16:21 ` [PATCH v12 00/26] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Ian Jackson
2016-03-24 16:43 ` Lars Kurth
2016-03-24 17:06 ` Wei Liu
2016-03-24 17:07 ` Ian Jackson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458720400-4699-22-git-send-email-xiecl.fnst@cn.fujitsu.com \
--to=xiecl.fnst@cn.fujitsu.com \
--cc=andrew.cooper3@citrix.com \
--cc=anthony.perard@citrix.com \
--cc=eddie.dong@intel.com \
--cc=guijianfeng@cn.fujitsu.com \
--cc=hongyang.yang@easystack.cn \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=konrad.wilk@oracle.com \
--cc=lars.kurth@citrix.com \
--cc=lizhijian@cn.fujitsu.com \
--cc=rshriram@cs.ubc.ca \
--cc=wei.liu2@citrix.com \
--cc=wency@cn.fujitsu.com \
--cc=xen-devel@lists.xen.org \
--cc=yunhong.jiang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).