From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: xen-devel@lists.xenproject.org, ross.lagerwall@citrix.com,
konrad@kernel.org, andrew.cooper3@citrix.com, mpohlack@amazon.de,
sasha.levin@oracle.com
Cc: Wei Liu <wei.liu2@citrix.com>,
Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
Ian Jackson <ian.jackson@eu.citrix.com>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH v5 07/28] libxc: Implementation of XEN_XSPLICE_op in libxc
Date: Thu, 24 Mar 2016 16:00:19 -0400 [thread overview]
Message-ID: <1458849640-22588-8-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1458849640-22588-1-git-send-email-konrad.wilk@oracle.com>
The underlaying toolstack code to do the basic
operations when using the XEN_XSPLICE_op syscalls:
- upload the payload,
- get status of an payload,
- list all the payloads,
- apply, check, replace, and revert the payload.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
v2: Actually set zero for the _pad entries.
v3: Split status into state and error code.
Add REPLACE action.
- Use timeout and utilize pads.
- Update per Wei's review.
- Extra space slipped in, remove it
v4: Add Wei's review, update comment and Ack.
---
tools/libxc/include/xenctrl.h | 62 ++++++++
tools/libxc/xc_misc.c | 337 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 399 insertions(+)
diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index a9e4dc1..65b4758 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -2561,6 +2561,68 @@ int xc_psr_cat_get_l3_info(xc_interface *xch, uint32_t socket,
bool *cdp_enabled);
#endif
+int xc_xsplice_upload(xc_interface *xch,
+ char *name, unsigned char *payload, uint32_t size);
+
+int xc_xsplice_get(xc_interface *xch,
+ char *name,
+ xen_xsplice_status_t *status);
+
+/*
+ * The heart of this function is to get an array of xen_xsplice_status_t.
+ *
+ * However it is complex because it has to deal with the hypervisor
+ * returning some of the requested data or data being stale
+ * (another hypercall might alter the list).
+ *
+ * The parameters that the function expects to contain data from
+ * the hypervisor are: 'info', 'name', and 'len'. The 'done' and
+ * 'left' are also updated with the number of entries filled out
+ * and respectively the number of entries left to get from hypervisor.
+ *
+ * It is expected that the caller of this function will take the
+ * 'left' and use the value for 'start'. This way we have an
+ * cursor in the array. Note that the 'info','name', and 'len' will
+ * be updated at the subsequent calls.
+ *
+ * The 'max' is to be provided by the caller with the maximum
+ * number of entries that 'info', 'name', and 'len' arrays can
+ * be filled up with.
+ *
+ * Each entry in the 'name' array is expected to be of XEN_XSPLICE_NAME_SIZE
+ * length.
+ *
+ * Each entry in the 'info' array is expected to be of xen_xsplice_status_t
+ * structure size.
+ *
+ * Each entry in the 'len' array is expected to be of uint32_t size.
+ *
+ * The return value is zero if the hypercall completed successfully.
+ * Note that the return value is _not_ the amount of entries filled
+ * out - that is saved in 'done'.
+ *
+ * If there was an error performing the operation, the return value
+ * will contain an negative -EXX type value. The 'done' and 'left'
+ * will contain the number of entries that had been succesfully
+ * retrieved (if any).
+ */
+int xc_xsplice_list(xc_interface *xch, unsigned int max, unsigned int start,
+ xen_xsplice_status_t *info, char *name,
+ uint32_t *len, unsigned int *done,
+ unsigned int *left);
+
+/*
+ * The operations are asynchronous and the hypervisor may take a while
+ * to complete them. The `timeout` offers an option to expire the
+ * operation if it could not be completed within the specified time
+ * (in ms). Value of 0 means let hypervisor decide the best timeout.
+ */
+int xc_xsplice_apply(xc_interface *xch, char *name, uint32_t timeout);
+int xc_xsplice_revert(xc_interface *xch, char *name, uint32_t timeout);
+int xc_xsplice_unload(xc_interface *xch, char *name, uint32_t timeout);
+int xc_xsplice_check(xc_interface *xch, char *name, uint32_t timeout);
+int xc_xsplice_replace(xc_interface *xch, char *name, uint32_t timeout);
+
/* Compat shims */
#include "xenctrl_compat.h"
diff --git a/tools/libxc/xc_misc.c b/tools/libxc/xc_misc.c
index 124537b..e09ac90 100644
--- a/tools/libxc/xc_misc.c
+++ b/tools/libxc/xc_misc.c
@@ -693,6 +693,343 @@ int xc_hvm_inject_trap(
return rc;
}
+int xc_xsplice_upload(xc_interface *xch,
+ char *name,
+ unsigned char *payload,
+ uint32_t size)
+{
+ int rc;
+ DECLARE_SYSCTL;
+ DECLARE_HYPERCALL_BUFFER(char, local);
+ DECLARE_HYPERCALL_BOUNCE(name, 0 /* later */, XC_HYPERCALL_BUFFER_BOUNCE_IN);
+ xen_xsplice_name_t def_name = { .pad = { 0, 0, 0 } };
+
+ if ( !name || !payload )
+ return -1;
+
+ def_name.size = strlen(name) + 1;
+ if ( def_name.size > XEN_XSPLICE_NAME_SIZE )
+ return -1;
+
+ HYPERCALL_BOUNCE_SET_SIZE(name, def_name.size);
+
+ if ( xc_hypercall_bounce_pre(xch, name) )
+ return -1;
+
+ local = xc_hypercall_buffer_alloc(xch, local, size);
+ if ( !local )
+ {
+ xc_hypercall_bounce_post(xch, name);
+ return -1;
+ }
+ memcpy(local, payload, size);
+
+ sysctl.cmd = XEN_SYSCTL_xsplice_op;
+ sysctl.u.xsplice.cmd = XEN_SYSCTL_XSPLICE_UPLOAD;
+ sysctl.u.xsplice.pad = 0;
+ sysctl.u.xsplice.u.upload.size = size;
+ set_xen_guest_handle(sysctl.u.xsplice.u.upload.payload, local);
+
+ sysctl.u.xsplice.u.upload.name = def_name;
+ set_xen_guest_handle(sysctl.u.xsplice.u.upload.name.name, name);
+
+ rc = do_sysctl(xch, &sysctl);
+
+ xc_hypercall_buffer_free(xch, local);
+ xc_hypercall_bounce_post(xch, name);
+
+ return rc;
+}
+
+int xc_xsplice_get(xc_interface *xch,
+ char *name,
+ xen_xsplice_status_t *status)
+{
+ int rc;
+ DECLARE_SYSCTL;
+ DECLARE_HYPERCALL_BOUNCE(name, 0 /*adjust later */, XC_HYPERCALL_BUFFER_BOUNCE_IN);
+ xen_xsplice_name_t def_name = { .pad = { 0, 0, 0 } };
+
+ if ( !name )
+ return -1;
+
+ def_name.size = strlen(name) + 1;
+ if ( def_name.size > XEN_XSPLICE_NAME_SIZE )
+ return -1;
+
+ HYPERCALL_BOUNCE_SET_SIZE(name, def_name.size);
+
+ if ( xc_hypercall_bounce_pre(xch, name) )
+ return -1;
+
+ sysctl.cmd = XEN_SYSCTL_xsplice_op;
+ sysctl.u.xsplice.cmd = XEN_SYSCTL_XSPLICE_GET;
+ sysctl.u.xsplice.pad = 0;
+
+ sysctl.u.xsplice.u.get.status.state = 0;
+ sysctl.u.xsplice.u.get.status.rc = 0;
+
+ sysctl.u.xsplice.u.get.name = def_name;
+ set_xen_guest_handle(sysctl.u.xsplice.u.get.name.name, name);
+
+ rc = do_sysctl(xch, &sysctl);
+
+ xc_hypercall_bounce_post(xch, name);
+
+ memcpy(status, &sysctl.u.xsplice.u.get.status, sizeof(*status));
+
+ return rc;
+}
+
+/*
+ * The heart of this function is to get an array of xen_xsplice_status_t.
+ *
+ * However it is complex because it has to deal with the hypervisor
+ * returning some of the requested data or data being stale
+ * (another hypercall might alter the list).
+ *
+ * The parameters that the function expects to contain data from
+ * the hypervisor are: 'info', 'name', and 'len'. The 'done' and
+ * 'left' are also updated with the number of entries filled out
+ * and respectively the number of entries left to get from hypervisor.
+ *
+ * It is expected that the caller of this function will take the
+ * 'left' and use the value for 'start'. This way we have an
+ * cursor in the array. Note that the 'info','name', and 'len' will
+ * be updated at the subsequent calls.
+ *
+ * The 'max' is to be provided by the caller with the maximum
+ * number of entries that 'info', 'name', and 'len' arrays can
+ * be filled up with.
+ *
+ * Each entry in the 'name' array is expected to be of XEN_XSPLICE_NAME_SIZE
+ * length.
+ *
+ * Each entry in the 'info' array is expected to be of xen_xsplice_status_t
+ * structure size.
+ *
+ * Each entry in the 'len' array is expected to be of uint32_t size.
+ *
+ * The return value is zero if the hypercall completed successfully.
+ * Note that the return value is _not_ the amount of entries filled
+ * out - that is saved in 'done'.
+ *
+ * If there was an error performing the operation, the return value
+ * will contain an negative -EXX type value. The 'done' and 'left'
+ * will contain the number of entries that had been succesfully
+ * retrieved (if any).
+ */
+int xc_xsplice_list(xc_interface *xch, unsigned int max, unsigned int start,
+ xen_xsplice_status_t *info,
+ char *name, uint32_t *len,
+ unsigned int *done,
+ unsigned int *left)
+{
+ int rc;
+ DECLARE_SYSCTL;
+ /* The sizes are adjusted later - hence zero. */
+ DECLARE_HYPERCALL_BOUNCE(info, 0, XC_HYPERCALL_BUFFER_BOUNCE_OUT);
+ DECLARE_HYPERCALL_BOUNCE(name, 0, XC_HYPERCALL_BUFFER_BOUNCE_OUT);
+ DECLARE_HYPERCALL_BOUNCE(len, 0, XC_HYPERCALL_BUFFER_BOUNCE_OUT);
+ uint32_t max_batch_sz, nr;
+ uint32_t version = 0, retries = 0;
+ uint32_t adjust = 0;
+ ssize_t sz;
+
+ if ( !max || !info || !name || !len )
+ return -1;
+
+ sysctl.cmd = XEN_SYSCTL_xsplice_op;
+ sysctl.u.xsplice.cmd = XEN_SYSCTL_XSPLICE_LIST;
+ sysctl.u.xsplice.pad = 0;
+ sysctl.u.xsplice.u.list.version = 0;
+ sysctl.u.xsplice.u.list.idx = start;
+ sysctl.u.xsplice.u.list.pad = 0;
+
+ max_batch_sz = max;
+ /* Convience value. */
+ sz = sizeof(*name) * XEN_XSPLICE_NAME_SIZE;
+ *done = 0;
+ *left = 0;
+ do {
+ /*
+ * The first time we go in this loop our 'max' may be bigger
+ * than what the hypervisor is comfortable with - hence the first
+ * couple of loops may adjust the number of entries we will
+ * want filled (tracked by 'nr').
+ *
+ * N.B. This is a do { } while loop and the right hand side of
+ * the conditional when adjusting will evaluate to false (as
+ * *left is set to zero before the loop. Hence we need this
+ * adjust - even if we reset it at the start of the loop.
+ */
+ if ( adjust )
+ adjust = 0; /* Used when adjusting the 'max_batch_sz' or 'retries'. */
+
+ nr = min(max - *done, max_batch_sz);
+
+ sysctl.u.xsplice.u.list.nr = nr;
+ /* Fix the size (may vary between hypercalls). */
+ HYPERCALL_BOUNCE_SET_SIZE(info, nr * sizeof(*info));
+ HYPERCALL_BOUNCE_SET_SIZE(name, nr * nr);
+ HYPERCALL_BOUNCE_SET_SIZE(len, nr * sizeof(*len));
+ /* Move the pointer to proper offset into 'info'. */
+ (HYPERCALL_BUFFER(info))->ubuf = info + *done;
+ (HYPERCALL_BUFFER(name))->ubuf = name + (sz * *done);
+ (HYPERCALL_BUFFER(len))->ubuf = len + *done;
+ /* Allocate memory. */
+ rc = xc_hypercall_bounce_pre(xch, info);
+ if ( rc )
+ break;
+
+ rc = xc_hypercall_bounce_pre(xch, name);
+ if ( rc )
+ break;
+
+ rc = xc_hypercall_bounce_pre(xch, len);
+ if ( rc )
+ break;
+
+ set_xen_guest_handle(sysctl.u.xsplice.u.list.status, info);
+ set_xen_guest_handle(sysctl.u.xsplice.u.list.name, name);
+ set_xen_guest_handle(sysctl.u.xsplice.u.list.len, len);
+
+ rc = do_sysctl(xch, &sysctl);
+ /*
+ * From here on we MUST call xc_hypercall_bounce. If rc < 0 we
+ * end up doing it (outside the loop), so using a break is OK.
+ */
+ if ( rc < 0 && errno == E2BIG )
+ {
+ if ( max_batch_sz <= 1 )
+ break;
+ max_batch_sz >>= 1;
+ adjust = 1; /* For the loop conditional to let us loop again. */
+ /* No memory leaks! */
+ xc_hypercall_bounce_post(xch, info);
+ xc_hypercall_bounce_post(xch, name);
+ xc_hypercall_bounce_post(xch, len);
+ continue;
+ }
+ else if ( rc < 0 ) /* For all other errors we bail out. */
+ break;
+
+ if ( !version )
+ version = sysctl.u.xsplice.u.list.version;
+
+ if ( sysctl.u.xsplice.u.list.version != version )
+ {
+ /* We could make this configurable as parameter? */
+ if ( retries++ > 3 )
+ {
+ rc = -1;
+ errno = EBUSY;
+ break;
+ }
+ *done = 0; /* Retry from scratch. */
+ version = sysctl.u.xsplice.u.list.version;
+ adjust = 1; /* And make sure we continue in the loop. */
+ /* No memory leaks. */
+ xc_hypercall_bounce_post(xch, info);
+ xc_hypercall_bounce_post(xch, name);
+ xc_hypercall_bounce_post(xch, len);
+ continue;
+ }
+
+ /* We should never hit this, but just in case. */
+ if ( rc > nr )
+ {
+ errno = EOVERFLOW; /* Overflow! */
+ rc = -1;
+ break;
+ }
+ *left = sysctl.u.xsplice.u.list.nr; /* Total remaining count. */
+ /* Copy only up 'rc' of data' - we could add 'min(rc,nr) if desired. */
+ HYPERCALL_BOUNCE_SET_SIZE(info, (rc * sizeof(*info)));
+ HYPERCALL_BOUNCE_SET_SIZE(name, (rc * sz));
+ HYPERCALL_BOUNCE_SET_SIZE(len, (rc * sizeof(*len)));
+ /* Bounce the data and free the bounce buffer. */
+ xc_hypercall_bounce_post(xch, info);
+ xc_hypercall_bounce_post(xch, name);
+ xc_hypercall_bounce_post(xch, len);
+ /* And update how many elements of info we have copied into. */
+ *done += rc;
+ /* Update idx. */
+ sysctl.u.xsplice.u.list.idx = *done;
+ } while ( adjust || (*done < max && *left != 0) );
+
+ if ( rc < 0 )
+ {
+ xc_hypercall_bounce_post(xch, len);
+ xc_hypercall_bounce_post(xch, name);
+ xc_hypercall_bounce_post(xch, info);
+ }
+
+ return rc > 0 ? 0 : rc;
+}
+
+static int _xc_xsplice_action(xc_interface *xch,
+ char *name,
+ unsigned int action,
+ uint32_t timeout)
+{
+ int rc;
+ DECLARE_SYSCTL;
+ /* The size is figured out when we strlen(name) */
+ DECLARE_HYPERCALL_BOUNCE(name, 0, XC_HYPERCALL_BUFFER_BOUNCE_IN);
+ xen_xsplice_name_t def_name = { .pad = { 0, 0, 0 } };
+
+ def_name.size = strlen(name) + 1;
+
+ if ( def_name.size > XEN_XSPLICE_NAME_SIZE )
+ return -1;
+
+ HYPERCALL_BOUNCE_SET_SIZE(name, def_name.size);
+
+ if ( xc_hypercall_bounce_pre(xch, name) )
+ return -1;
+
+ sysctl.cmd = XEN_SYSCTL_xsplice_op;
+ sysctl.u.xsplice.cmd = XEN_SYSCTL_XSPLICE_ACTION;
+ sysctl.u.xsplice.pad = 0;
+ sysctl.u.xsplice.u.action.cmd = action;
+ sysctl.u.xsplice.u.action.timeout = timeout;
+
+ sysctl.u.xsplice.u.action.name = def_name;
+ set_xen_guest_handle(sysctl.u.xsplice.u.action.name.name, name);
+
+ rc = do_sysctl(xch, &sysctl);
+
+ xc_hypercall_bounce_post(xch, name);
+
+ return rc;
+}
+
+int xc_xsplice_apply(xc_interface *xch, char *name, uint32_t timeout)
+{
+ return _xc_xsplice_action(xch, name, XSPLICE_ACTION_APPLY, timeout);
+}
+
+int xc_xsplice_revert(xc_interface *xch, char *name, uint32_t timeout)
+{
+ return _xc_xsplice_action(xch, name, XSPLICE_ACTION_REVERT, timeout);
+}
+
+int xc_xsplice_unload(xc_interface *xch, char *name, uint32_t timeout)
+{
+ return _xc_xsplice_action(xch, name, XSPLICE_ACTION_UNLOAD, timeout);
+}
+
+int xc_xsplice_check(xc_interface *xch, char *name, uint32_t timeout)
+{
+ return _xc_xsplice_action(xch, name, XSPLICE_ACTION_CHECK, timeout);
+}
+
+int xc_xsplice_replace(xc_interface *xch, char *name, uint32_t timeout)
+{
+ return _xc_xsplice_action(xch, name, XSPLICE_ACTION_REPLACE, timeout);
+}
+
/*
* Local variables:
* mode: C
--
2.5.0
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-03-24 20:01 UTC|newest]
Thread overview: 190+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-24 20:00 [PATCH v5] xSplice v1 design and implementation Konrad Rzeszutek Wilk
2016-03-24 20:00 ` [PATCH v5 01/28] HYPERCALL_version_op. New hypercall mirroring XENVER_ but sane Konrad Rzeszutek Wilk
2016-03-24 20:22 ` Andrew Cooper
2016-03-24 21:07 ` Konrad Rzeszutek Wilk
2016-03-24 21:30 ` Konrad Rzeszutek Wilk
2016-03-30 15:43 ` Jan Beulich
2016-03-31 6:30 ` Jan Beulich
2016-03-31 11:43 ` Konrad Rzeszutek Wilk
2016-03-31 12:07 ` Jan Beulich
2016-03-31 13:28 ` REST MAINTAINERS feedback requested Was:Re: " Konrad Rzeszutek Wilk
2016-03-31 13:50 ` Jan Beulich
2016-04-08 16:33 ` Jan Beulich
2016-04-08 17:09 ` Konrad Rzeszutek Wilk
2016-04-08 17:13 ` Jan Beulich
2016-04-08 17:21 ` Wei Liu
2016-04-08 17:23 ` Konrad Rzeszutek Wilk
2016-04-08 17:27 ` Wei Liu
2016-04-08 17:21 ` Ian Jackson
2016-04-08 17:41 ` Andrew Cooper
2016-04-08 17:54 ` Jan Beulich
2016-04-11 10:50 ` Ian Jackson
2016-04-11 13:56 ` Konrad Rzeszutek Wilk
2016-04-11 14:22 ` Ian Jackson
2016-04-11 15:48 ` Jan Beulich
2016-04-11 16:25 ` Ian Jackson
2016-04-11 16:53 ` Konrad Rzeszutek Wilk
2016-04-11 17:06 ` Jan Beulich
2016-04-11 17:00 ` Jan Beulich
2016-04-11 17:13 ` Ian Jackson
2016-04-11 17:34 ` Jan Beulich
2016-04-11 17:46 ` Jan Beulich
2016-04-12 9:58 ` George Dunlap
2016-04-12 13:56 ` Konrad Rzeszutek Wilk
2016-04-12 14:38 ` George Dunlap
2016-04-12 15:00 ` Konrad Rzeszutek Wilk
2016-04-12 15:26 ` Ian Jackson
2016-04-13 4:21 ` Jan Beulich
2016-04-13 16:07 ` Ian Jackson
2016-04-14 15:13 ` George Dunlap
2016-04-14 15:59 ` Jan Beulich
2016-04-14 16:19 ` George Dunlap
2016-04-14 17:01 ` Jan Beulich
2016-04-14 18:11 ` REST MAINTAINERS feedback requested Was:Re: [PATCH v5 01/28] HYPERCALL_version_op. New hypercall mirroring XENVER_ but sane. [and 1 more messages] Ian Jackson
2016-04-14 19:22 ` Konrad Rzeszutek Wilk
2016-04-17 7:23 ` Jan Beulich
2016-04-15 11:23 ` REST MAINTAINERS feedback requested Was:Re: [PATCH v5 01/28] HYPERCALL_version_op. New hypercall mirroring XENVER_ but sane George Dunlap
2016-04-17 7:52 ` Jan Beulich
2016-04-12 15:31 ` Jan Beulich
2016-04-12 15:17 ` Jan Beulich
2016-04-12 15:28 ` Konrad Rzeszutek Wilk
2016-04-08 17:24 ` George Dunlap
2016-04-08 17:34 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 02/28] libxc/libxl/python/xenstat/ocaml: Use new XEN_VERSION hypercall Konrad Rzeszutek Wilk
2016-03-24 21:24 ` Wei Liu
2016-03-25 13:21 ` Konrad Rzeszutek Wilk
2016-03-24 20:00 ` [PATCH v5 03/28] arm/x86: Use struct virtual_region to do bug, symbol, and (x86) exception tables lookup Konrad Rzeszutek Wilk
2016-03-30 16:09 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 04/28] vmap: Add vmalloc_cb and vfree_cb Konrad Rzeszutek Wilk
2016-03-30 16:24 ` Jan Beulich
2016-03-30 16:44 ` Konrad Rzeszutek Wilk
2016-03-31 6:46 ` Jan Beulich
2016-03-31 11:49 ` Konrad Rzeszutek Wilk
2016-03-24 20:00 ` [PATCH v5 05/28] xsplice: Design document Konrad Rzeszutek Wilk
2016-03-29 9:36 ` Jan Beulich
2016-03-29 20:46 ` Konrad Rzeszutek Wilk
2016-03-24 20:00 ` [PATCH v5 06/28] xen/xsplice: Hypervisor implementation of XEN_XSPLICE_op Konrad Rzeszutek Wilk
2016-03-31 9:45 ` Jan Beulich
2016-03-24 20:00 ` Konrad Rzeszutek Wilk [this message]
2016-03-24 20:00 ` [PATCH v5 08/28] xen-xsplice: Tool to manipulate xsplice payloads Konrad Rzeszutek Wilk
2016-03-24 20:00 ` [PATCH v5 09/28] xsplice: Add helper elf routines Konrad Rzeszutek Wilk
2016-03-31 12:03 ` Jan Beulich
2016-04-06 1:38 ` Konrad Rzeszutek Wilk
2016-04-07 0:38 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 10/28] xsplice: Implement payload loading Konrad Rzeszutek Wilk
2016-03-31 13:45 ` Jan Beulich
2016-03-31 21:26 ` Konrad Rzeszutek Wilk
2016-04-01 9:18 ` Jan Beulich
2016-04-04 19:44 ` Konrad Rzeszutek Wilk
2016-04-05 1:57 ` Konrad Rzeszutek Wilk
2016-04-05 7:34 ` Jan Beulich
2016-04-05 15:50 ` Konrad Rzeszutek Wilk
2016-04-05 16:15 ` Jan Beulich
2016-04-05 16:45 ` Konrad Rzeszutek Wilk
2016-04-05 17:48 ` Konrad Rzeszutek Wilk
2016-04-07 0:49 ` Jan Beulich
2016-04-07 0:46 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 11/28] xsplice: Implement support for applying/reverting/replacing patches Konrad Rzeszutek Wilk
2016-04-01 13:28 ` Jan Beulich
2016-04-01 21:04 ` Konrad Rzeszutek Wilk
2016-04-04 7:07 ` Jan Beulich
2016-04-07 3:05 ` Konrad Rzeszutek Wilk
2016-04-07 15:38 ` Jan Beulich
2016-04-09 14:42 ` Konrad Rzeszutek Wilk
2016-04-11 15:38 ` Jan Beulich
2016-04-07 3:09 ` Konrad Rzeszutek Wilk
2016-04-07 15:43 ` Jan Beulich
2016-04-10 2:36 ` Konrad Rzeszutek Wilk
2016-04-10 2:45 ` Konrad Rzeszutek Wilk
2016-04-11 15:41 ` Jan Beulich
2016-04-11 23:29 ` Konrad Rzeszutek Wilk
2016-04-10 19:47 ` Is: ARM maintainers advice ..Was:Re: " Konrad Rzeszutek Wilk
2016-04-10 20:58 ` Stefano Stabellini
2016-04-11 15:44 ` Jan Beulich
2016-04-11 15:50 ` Konrad Rzeszutek Wilk
2016-04-11 16:05 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 12/28] x86/xen_hello_world.xsplice: Test payload for patching 'xen_extra_version' Konrad Rzeszutek Wilk
2016-04-01 13:33 ` Jan Beulich
2016-04-06 2:03 ` Konrad Rzeszutek Wilk
2016-04-07 1:03 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 13/28] xsplice, symbols: Implement symbol name resolution on address Konrad Rzeszutek Wilk
2016-04-01 15:11 ` Jan Beulich
2016-04-07 3:14 ` Konrad Rzeszutek Wilk
2016-04-07 15:46 ` Jan Beulich
2016-04-08 1:32 ` Konrad Rzeszutek Wilk
2016-04-08 15:21 ` Jan Beulich
2016-04-08 15:27 ` Konrad Rzeszutek Wilk
2016-04-08 15:29 ` Jan Beulich
[not found] ` <5707D68A.8090006@citrix.com>
[not found] ` <5707FA8B02000078000E6178@prv-mh.provo.novell.com>
2016-04-11 8:07 ` Ross Lagerwall
2016-03-24 20:00 ` [PATCH v5 14/28] x86, xsplice: Print payload's symbol name and payload name in backtraces Konrad Rzeszutek Wilk
2016-04-01 15:23 ` Jan Beulich
2016-04-06 2:39 ` Konrad Rzeszutek Wilk
2016-04-07 1:07 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 15/28] xsplice: Add .xsplice.hooks functions and test-case Konrad Rzeszutek Wilk
2016-04-01 15:50 ` Jan Beulich
2016-04-06 2:42 ` Konrad Rzeszutek Wilk
2016-04-06 6:39 ` Martin Pohlack
2016-04-07 1:15 ` Jan Beulich
2016-04-08 15:57 ` Ross Lagerwall
2016-04-08 17:39 ` Jan Beulich
2016-04-11 8:23 ` Ross Lagerwall
2016-04-22 13:33 ` Jan Beulich
2016-04-22 13:58 ` Jan Beulich
2016-04-22 17:32 ` Konrad Rzeszutek Wilk
2016-04-07 1:11 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 16/28] xsplice: Add support for bug frames Konrad Rzeszutek Wilk
2016-04-01 16:00 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 17/28] xsplice: Add support for exception tables Konrad Rzeszutek Wilk
2016-04-01 16:06 ` Jan Beulich
2016-04-06 14:41 ` Konrad Rzeszutek Wilk
2016-04-06 15:32 ` Andrew Cooper
2016-04-07 1:21 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 18/28] xsplice: Add support for alternatives Konrad Rzeszutek Wilk
2016-04-01 16:20 ` Jan Beulich
2016-04-07 3:11 ` Konrad Rzeszutek Wilk
2016-03-24 20:00 ` [PATCH v5 19/28] build_id: Provide ld-embedded build-ids Konrad Rzeszutek Wilk
2016-04-04 12:46 ` Jan Beulich
2016-04-07 2:58 ` Konrad Rzeszutek Wilk
2016-04-08 15:49 ` Ross Lagerwall
2016-04-08 18:47 ` Konrad Rzeszutek Wilk
2016-04-08 18:54 ` Andrew Cooper
2016-04-08 19:54 ` Jan Beulich
2016-04-08 0:18 ` Konrad Rzeszutek Wilk
2016-04-08 1:52 ` Konrad Rzeszutek Wilk
2016-04-08 15:27 ` Jan Beulich
2016-04-08 17:06 ` Konrad Rzeszutek Wilk
2016-04-08 17:44 ` Jan Beulich
2016-04-08 19:23 ` Konrad Rzeszutek Wilk
2016-04-08 19:39 ` Konrad Rzeszutek Wilk
2016-04-08 20:14 ` Jan Beulich
2016-04-08 20:50 ` Konrad Rzeszutek Wilk
2016-04-08 21:11 ` Jan Beulich
2016-04-08 21:15 ` Konrad Rzeszutek Wilk
2016-04-08 15:25 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 20/28] HYPERCALL_version_op: Add VERSION_build_id to retrieve build-id Konrad Rzeszutek Wilk
2016-03-25 16:26 ` Daniel De Graaf
2016-04-04 13:35 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 21/28] libxl: info: Display build_id of the hypervisor using XEN_VERSION_build_id Konrad Rzeszutek Wilk
2016-03-25 13:25 ` Konrad Rzeszutek Wilk
2016-03-25 15:27 ` Wei Liu
2016-03-24 20:00 ` [PATCH v5 22/28] xsplice: Print build_id in keyhandler and on bootup Konrad Rzeszutek Wilk
2016-04-04 13:38 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 23/28] xsplice: Stacking build-id dependency checking Konrad Rzeszutek Wilk
2016-04-04 15:00 ` Jan Beulich
2016-04-04 20:01 ` Konrad Rzeszutek Wilk
2016-04-05 7:43 ` Jan Beulich
2016-04-08 16:15 ` Ross Lagerwall
2016-04-08 17:47 ` Jan Beulich
2016-04-06 20:05 ` Konrad Rzeszutek Wilk
2016-04-07 1:24 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 24/28] xsplice/xen_replace_world: Test-case for XSPLICE_ACTION_REPLACE Konrad Rzeszutek Wilk
2016-03-24 20:00 ` [PATCH v5 25/28] xsplice: Print dependency and payloads build_id in the keyhandler Konrad Rzeszutek Wilk
2016-04-04 15:03 ` Jan Beulich
2016-03-24 20:00 ` [PATCH v5 26/28] xsplice: Prevent duplicate payloads from being loaded Konrad Rzeszutek Wilk
2016-04-04 15:06 ` Jan Beulich
2016-04-04 19:52 ` Konrad Rzeszutek Wilk
2016-03-24 20:00 ` [PATCH v5 27/28] xsplice: Add support for shadow variables Konrad Rzeszutek Wilk
2016-04-04 15:18 ` Jan Beulich
2016-04-06 2:26 ` Konrad Rzeszutek Wilk
2016-04-08 15:58 ` Ross Lagerwall
2016-03-24 20:00 ` [PATCH v5 28/28] MAINTAINERS/xsplice: Add myself and Ross as the maintainers Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458849640-22588-8-git-send-email-konrad.wilk@oracle.com \
--to=konrad.wilk@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=konrad@kernel.org \
--cc=mpohlack@amazon.de \
--cc=ross.lagerwall@citrix.com \
--cc=sasha.levin@oracle.com \
--cc=stefano.stabellini@eu.citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).